Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

652
Ericsson HLR (Home Location Register) R12.0 Cartridge Guide Fifth Edition August 2008 Oracle Communications ASAP™ Cartridge 1.1.0 GA Release for Ericsson HLR R12.0

Transcript of Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Page 1: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Ericsson HLR (HomeLocation Register) R12.0

Cartridge GuideFifth Edition

August 2008

Oracle Communications ASAP™ Cartridge 1.1.0 GA Release for Ericsson HLR R12.0

Page 2: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Copyright and Trademark Information

Copyright © 1992, 2008, Oracle and/or its affiliates. All rights reserved.Oracle is a registered trademark of Oracle Corporation and/or its affiliates. Other names may be trademarks of their respective owners.

This software and related documentation are provided under a license agreement containing restrictions on use and disclosure and are protected by intellectual property laws. Except as expressly permitted in your license agreement or allowed by law, you may not use, copy, reproduce, translate, broadcast, modify, license, transmit, distribute, exhibit, perform, publish or display any part, in any form, or by any means. Reverse engineering, disassembly, or decompilation of this software, unless required by law for interoperability, is prohibited.The information contained herein is subject to change without notice and is not warranted to be error-free. If you find any errors, please report them to us in writing.

If this software or related documentation is delivered to the U.S. Government or anyone licensing it on behalf of the U.S. Government, the following notice is applicable:

U.S. GOVERNMENT RIGHTS Programs, software, databases, and related documentation and technical data delivered to U.S. Government customers are "commercial computer software" or "commercial technical data" pursuant to the applicable Federal Acquisition Regulation and agency-specific supplemental regulations. As such, the use, duplication, disclosure, modification, and adaptation shall be subject to the restrictions and license terms set forth in the applicable Government contract, and, to the extent applicable by the terms of the Government contract, the additional rights set forth in FAR 52.227-19, Commercial Computer Software License (December 2007). Oracle USA, Inc., 500 Oracle Parkway, Redwood City, CA 94065.This software is developed for general use in a variety of information management applications. It is not developed or intended for use in any inherently dangerous applications, including applications which may create a risk of personal injury. If you use this software in dangerous applications, then you shall be responsible to take all appropriate fail-safe, backup, redundancy and other measures to ensure the safe use of this software. Oracle Corporation and its affiliates disclaim any liability for any damages caused by use of this software in dangerous applications.

This software and documentation may provide access to or information on content, products and services from third parties. Oracle Corporation and its affiliates are not responsible for and expressly disclaim all warranties of any kind with respect to third party content, products and services. Oracle Corporation and its affiliates will not be responsible for any loss, costs, or damages incurred due to your access to or use of third party content, products or services.

Page 3: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide iii

Contents1. Cartridge Overview ...................................................................................... 1

Cartridge content ................................................................................................................... 1Prerequisites ......................................................................................................................... 2About this guide .................................................................................................................... 2Services, features, and options ............................................................................................. 3Hardware and software requirements ................................................................................... 8Network element (NE) interface ............................................................................................ 8ASAP version ........................................................................................................................ 8Connecting to the NE ............................................................................................................ 8

2. Installing and Testing the Cartridge ........................................................... 9Downloading the cartridge .................................................................................................... 9Starting ASAP ..................................................................................................................... 10Installing the cartridge using scripts .................................................................................... 11Uninstalling the cartridge using scripts ................................................................................ 11Testing the cartridge installation ......................................................................................... 12

Configuring loopback and live mode parameters ......................................................... 12Modifying NE_ERIC-HLR_R12-0-HOST.xml ................................................................ 13Testing the installation .................................................................................................. 14

Deployment of the cartridge using Studio ........................................................................... 15Uninstallation and Undeployment of the cartridge using Studio .......................................... 16

3. Atomic Service Description Layer (ASDL) Commands .......................... 17ASDL commands ................................................................................................................ 18

A_ERIC-HLR_R12-0_ACT_BAIC ................................................................................. 26A_ERIC-HLR_R12-0_ACT_BAOC ............................................................................... 27A_ERIC-HLR_R12-0_ACT_BICRO .............................................................................. 28A_ERIC-HLR_R12-0_ACT_BOIC ................................................................................. 29A_ERIC-HLR_R12-0_ACT_BOIEXH ............................................................................ 30A_ERIC-HLR_R12-0_ACT_BS21 ................................................................................. 31A_ERIC-HLR_R12-0_ACT_BS22 ................................................................................. 32A_ERIC-HLR_R12-0_ACT_BS23 ................................................................................. 33A_ERIC-HLR_R12-0_ACT_BS24 ................................................................................. 34A_ERIC-HLR_R12-0_ACT_BS25 ................................................................................. 35A_ERIC-HLR_R12-0_ACT_BS26 ................................................................................. 36A_ERIC-HLR_R12-0_ACT_BS2G ................................................................................ 37A_ERIC-HLR_R12-0_ACT_BS31 ................................................................................. 38A_ERIC-HLR_R12-0_ACT_BS32 ................................................................................. 39A_ERIC-HLR_R12-0_ACT_BS33 ................................................................................. 40A_ERIC-HLR_R12-0_ACT_BS34 ................................................................................. 41A_ERIC-HLR_R12-0_ACT_BS3G ................................................................................ 42A_ERIC-HLR_R12-0_ACT_CAW ................................................................................. 43A_ERIC-HLR_R12-0_ACT_CFB .................................................................................. 44A_ERIC-HLR_R12-0_ACT_CFNRC ............................................................................. 45

Page 4: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

iv Oracle Corporation

A_ERIC-HLR_R12-0_ACT_CFNRY ............................................................................. 46A_ERIC-HLR_R12-0_ACT_CFU .................................................................................. 47A_ERIC-HLR_R12-0_ACT_CLIP ................................................................................. 48A_ERIC-HLR_R12-0_ACT_CLIR ................................................................................. 49A_ERIC-HLR_R12-0_ACT_COLP ................................................................................ 50A_ERIC-HLR_R12-0_ACT_COLR ............................................................................... 51A_ERIC-HLR_R12-0_ACT_EMLPP ............................................................................. 52A_ERIC-HLR_R12-0_ACT_HOLD ............................................................................... 53A_ERIC-HLR_R12-0_ACT_ICI ..................................................................................... 54A_ERIC-HLR_R12-0_ACT_MPTY ............................................................................... 55A_ERIC-HLR_R12-0_ACT_OBA .................................................................................. 56A_ERIC-HLR_R12-0_ACT_OBOPRE .......................................................................... 57A_ERIC-HLR_R12-0_ACT_OBOPRI ........................................................................... 58A_ERIC-HLR_R12-0_ACT_OBSSM ............................................................................ 59A_ERIC-HLR_R12-0_ACT_OBZI ................................................................................. 60A_ERIC-HLR_R12-0_ACT_OIN ................................................................................... 61A_ERIC-HLR_R12-0_ACT_OSB1 ................................................................................ 62A_ERIC-HLR_R12-0_ACT_OSB2 ................................................................................ 63A_ERIC-HLR_R12-0_ACT_OSB3 ................................................................................ 64A_ERIC-HLR_R12-0_ACT_OSB4 ................................................................................ 65A_ERIC-HLR_R12-0_ACT_PAI .................................................................................... 66A_ERIC-HLR_R12-0_ACT_SOCFRC .......................................................................... 67A_ERIC-HLR_R12-0_ACT_SOCFU ............................................................................. 68A_ERIC-HLR_R12-0_ACT_SOCLIP ............................................................................ 69A_ERIC-HLR_R12-0_ACT_SOCOLP .......................................................................... 70A_ERIC-HLR_R12-0_ACT_TIN .................................................................................... 71A_ERIC-HLR_R12-0_ACT_TS11 ................................................................................. 72A_ERIC-HLR_R12-0_ACT_TS21 ................................................................................. 73A_ERIC-HLR_R12-0_ACT_TS22 ................................................................................. 74A_ERIC-HLR_R12-0_ACT_TS61 ................................................................................. 75A_ERIC-HLR_R12-0_ACT_TS62 ................................................................................. 76A_ERIC-HLR_R12-0_ACT_TSMO ............................................................................... 77A_ERIC-HLR_R12-0_ADD_AMSISDN ......................................................................... 78A_ERIC-HLR_R12-0_ADD_APN .................................................................................. 79A_ERIC-HLR_R12-0_ADD_BAIC ................................................................................. 80A_ERIC-HLR_R12-0_ADD_BAOC ............................................................................... 81A_ERIC-HLR_R12-0_ADD_BICRO .............................................................................. 82A_ERIC-HLR_R12-0_ADD_BOIC ................................................................................ 83A_ERIC-HLR_R12-0_ADD_BOIEXH ........................................................................... 84A_ERIC-HLR_R12-0_ADD_CAMEL ............................................................................. 85A_ERIC-HLR_R12-0_ADD_CAMEL-RB ...................................................................... 90A_ERIC-HLR_R12-0_ADD_CAW ................................................................................. 93A_ERIC-HLR_R12-0_ADD_CFB .................................................................................. 94A_ERIC-HLR_R12-0_ADD_CFNRC ............................................................................ 96A_ERIC-HLR_R12-0_ADD_CFNRY ............................................................................. 97A_ERIC-HLR_R12-0_ADD_CFS .................................................................................. 99A_ERIC-HLR_R12-0_ADD_CFU ................................................................................ 100A_ERIC-HLR_R12-0_ADD_CUG ............................................................................... 101

Page 5: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide v

A_ERIC-HLR_R12-0_ADD_DCF ................................................................................ 103A_ERIC-HLR_R12-0_ADD_FEATURES .................................................................... 104A_ERIC-HLR_R12-0_ADD_FEATURES-RB .............................................................. 106A_ERIC-HLR_R12-0_ADD_GMLC ............................................................................. 108A_ERIC-HLR_R12-0_ADD_GPRS ............................................................................. 110A_ERIC-HLR_R12-0_ADD_GPRS-RB ....................................................................... 112A_ERIC-HLR_R12-0_ADD_LOC-SERVICES ............................................................ 113A_ERIC-HLR_R12-0_ADD_SPN ................................................................................ 116A_ERIC-HLR_R12-0_ADD_SMS-SPAM-DATA ......................................................... 118A_ERIC-HLR_R12-0_VIRTUAL_ADD-GPRS ............................................................ 119A_ERIC-HLR_R12-0_VIRTUAL_ADD-NAM ............................................................... 119A_ERIC-HLR_R12-0_VIRTUAL_ADD-FEATURES ................................................... 120A_ERIC-HLR_R12-0_CREATE_MULTIPLE-SUBSCRIPTION .................................. 120A_ERIC-HLR_R12-0_CREATE_SUBSCRIPTION ..................................................... 122A_ERIC-HLR_R12-0_VIRTUAL_CREATE-SUBSCRIPTION ..................................... 123A_ERIC-HLR_R12-0_DEACT_BAIC .......................................................................... 123A_ERIC-HLR_R12-0_DEACT_BAOC ........................................................................ 124A_ERIC-HLR_R12-0_DEACT_BICRO ....................................................................... 125A_ERIC-HLR_R12-0_DEACT_BOIC .......................................................................... 126A_ERIC-HLR_R12-0_DEACT_BOIEXH ..................................................................... 127A_ERIC-HLR_R12-0_DEACT_BS21 .......................................................................... 128A_ERIC-HLR_R12-0_DEACT_BS22 .......................................................................... 129A_ERIC-HLR_R12-0_DEACT_BS23 .......................................................................... 130A_ERIC-HLR_R12-0_DEACT_BS24 .......................................................................... 131A_ERIC-HLR_R12-0_DEACT_BS25 .......................................................................... 132A_ERIC-HLR_R12-0_DEACT_BS26 .......................................................................... 133A_ERIC-HLR_R12-0_DEACT_BS2G ......................................................................... 134A_ERIC-HLR_R12-0_DEACT_BS31 .......................................................................... 135A_ERIC-HLR_R12-0_DEACT_BS32 .......................................................................... 136A_ERIC-HLR_R12-0_DEACT_BS33 .......................................................................... 137A_ERIC-HLR_R12-0_DEACT_BS34 .......................................................................... 138A_ERIC-HLR_R12-0_DEACT_BS3G ......................................................................... 139A_ERIC-HLR_R12-0_DEACT_CAW .......................................................................... 140A_ERIC-HLR_R12-0_DEACT_CFB ........................................................................... 141A_ERIC-HLR_R12-0_DEACT_CFNRC ...................................................................... 142A_ERIC-HLR_R12-0_DEACT_CFNRY ...................................................................... 143A_ERIC-HLR_R12-0_DEACT_CFU ........................................................................... 144A_ERIC-HLR_R12-0_DEACT_CLIP .......................................................................... 145A_ERIC-HLR_R12-0_DEACT_CLIR .......................................................................... 146A_ERIC-HLR_R12-0_DEACT_COLP ......................................................................... 147A_ERIC-HLR_R12-0_DEACT_COLR ........................................................................ 148A_ERIC-HLR_R12-0_DEACT_EMLPP ...................................................................... 149A_ERIC-HLR_R12-0_DEACT_HOLD ........................................................................ 150A_ERIC-HLR_R12-0_DEACT_ICI .............................................................................. 151A_ERIC-HLR_R12-0_DEACT_MPTY ........................................................................ 152A_ERIC-HLR_R12-0_DEACT_OBA ........................................................................... 153A_ERIC-HLR_R12-0_DEACT_OBOPRE ................................................................... 154A_ERIC-HLR_R12-0_DEACT_OBOPRI .................................................................... 155

Page 6: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

vi Oracle Corporation

A_ERIC-HLR_R12-0_DEACT_OBSSM ..................................................................... 156A_ERIC-HLR_R12-0_DEACT_OBZI .......................................................................... 157A_ERIC-HLR_R12-0_DEACT_OIN ............................................................................ 158A_ERIC-HLR_R12-0_DEACT_OSB1 ......................................................................... 159A_ERIC-HLR_R12-0_DEACT_OSB2 ......................................................................... 160A_ERIC-HLR_R12-0_DEACT_OSB3 ......................................................................... 161A_ERIC-HLR_R12-0_DEACT_OSB4 ......................................................................... 162A_ERIC-HLR_R12-0_DEACT_PAI ............................................................................. 163A_ERIC-HLR_R12-0_DEACT_SOCFRC ................................................................... 164A_ERIC-HLR_R12-0_DEACT_SOCFU ...................................................................... 165A_ERIC-HLR_R12-0_DEACT_SOCLIP ..................................................................... 166A_ERIC-HLR_R12-0_DEACT_SOCOLP ................................................................... 167A_ERIC-HLR_R12-0_DEACT_TIN ............................................................................. 168A_ERIC-HLR_R12-0_DEACT_TS11 .......................................................................... 169A_ERIC-HLR_R12-0_DEACT_TS21 .......................................................................... 170A_ERIC-HLR_R12-0_DEACT_TS22 .......................................................................... 171A_ERIC-HLR_R12-0_DEACT_TS61 .......................................................................... 172A_ERIC-HLR_R12-0_DEACT_TS62 .......................................................................... 173A_ERIC-HLR_R12-0_DEACT_TSMO ........................................................................ 174A_ERIC-HLR_R12-0_DELETE_SUBSCRIPTION ...................................................... 175A_ERIC-HLR_R12-0_DELETE_MULTIPLE-SUBSCRIPTION ................................... 176A_ERIC-HLR_R12-0_GET_CAMEL ........................................................................... 177A_ERIC-HLR_R12-0_GET_CAMEL-RB ..................................................................... 181A_ERIC-HLR_R12-0_GET_PDP ................................................................................ 183A_ERIC-HLR_R12-0_GET_PDPDATA ...................................................................... 184A_ERIC-HLR_R12-0_GET_PDPDATA-RB ................................................................ 185A_ERIC-HLR_R12-0_GET_PDPID ............................................................................ 187A_ERIC-HLR_R12-0_GET_PDPID-RB ...................................................................... 188A_ERIC-HLR_R12-0_GET_SERVICE-ADDRESSES ................................................ 189A_ERIC-HLR_R12-0_GET_SUBSCRIBER ................................................................ 191A_ERIC-HLR_R12-0_GET_SUBSCRIBER-RB .......................................................... 193A_ERIC-HLR_R12-0_GET_SUBSCRIPTION ............................................................ 196A_ERIC-HLR_R12-0_GET_SUBSCRIPTION-RB ...................................................... 197A_ERIC-HLR_R12-0_GET_SUBSCRIBER-ALLDATA ............................................... 199A_ERIC-HLR_R12-0_GET_IMSI-DEL-DATA ............................................................. 200A_ERIC-HLR_R12-0_MODIFY_IMSI ......................................................................... 201A_ERIC-HLR_R12-0_MODIFY_IMSI-CANCEL ......................................................... 203A_ERIC-HLR_R12-0_MODIFY_IMSI-CHANGEOVER .............................................. 204A_ERIC-HLR_R12-0_MODIFY_IMSI-DEL-DATA ...................................................... 205A_ERIC-HLR_R12-0_MODIFY_IMSI-DEL-DATA-RB ................................................ 206A_ERIC-HLR_R12-0_MODIFY_LOC-SERVICES ...................................................... 207A_ERIC-HLR_R12-0_MODIFY_MULTIPLE-SUBSCRIPTION ................................... 209A_ERIC-HLR_R12-0_MODIFY_SUBSCRIPTION ...................................................... 210A_ERIC-HLR_R12-0_MODIFY_SUBSCRIPTION-RB ............................................... 212A_ERIC-HLR_R12-0_MOD_ACC ............................................................................... 214A_ERIC-HLR_R12-0_MOD_ACC-RB ........................................................................ 215A_ERIC-HLR_R12-0_MOD_AOC .............................................................................. 216A_ERIC-HLR_R12-0_MOD_AOC-RB ........................................................................ 217

Page 7: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide vii

A_ERIC-HLR_R12-0_MOD_BS2F ............................................................................. 218A_ERIC-HLR_R12-0_MOD_BS2F-RB ....................................................................... 219A_ERIC-HLR_R12-0_MOD_BS3F ............................................................................. 220A_ERIC-HLR_R12-0_MOD_BS3F-RB ....................................................................... 221A_ERIC-HLR_R12-0_MOD_CAMEL .......................................................................... 222A_ERIC-HLR_R12-0_MOD_CAMEL-EXTENDED ..................................................... 227A_ERIC-HLR_R12-0_MOD_CAMEL-EXTENDED-RB ............................................... 240A_ERIC-HLR_R12-0_MOD_CAMEL-RB .................................................................... 253A_ERIC-HLR_R12-0_MOD_CAPL ............................................................................. 255A_ERIC-HLR_R12-0_MOD_CAPL-RB ....................................................................... 256A_ERIC-HLR_R12-0_MOD_CAT ............................................................................... 257A_ERIC-HLR_R12-0_MOD_CAT-RB ......................................................................... 258A_ERIC-HLR_R12-0_MOD_DBSG ............................................................................ 259A_ERIC-HLR_R12-0_MOD_DBSG-RB ...................................................................... 261A_ERIC-HLR_R12-0_MOD_DEMLPP ....................................................................... 262A_ERIC-HLR_R12-0_MOD_DEMLPP-RB ................................................................. 263A_ERIC-HLR_R12-0_MOD_FEATURES ................................................................... 264A_ERIC-HLR_R12-0_MOD_GPRS ............................................................................ 265A_ERIC-HLR_R12-0_MOD_GPRS-RB ...................................................................... 268A_ERIC-HLR_R12-0_MOD_HPN ............................................................................... 271A_ERIC-HLR_R12-0_MOD_HPN-RB ........................................................................ 272A_ERIC-HLR_R12-0_MOD_MEMLPP ....................................................................... 273A_ERIC-HLR_R12-0_MOD_MEMLPP-RB ................................................................. 274A_ERIC-HLR_R12-0_MOD_NAM .............................................................................. 275A_ERIC-HLR_R12-0_MOD_NAM-RB ........................................................................ 277A_ERIC-HLR_R12-0_MOD_OBI ................................................................................ 278A_ERIC-HLR_R12-0_MOD_OBI-RB .......................................................................... 279A_ERIC-HLR_R12-0_MOD_OBO .............................................................................. 280A_ERIC-HLR_R12-0_MOD_OBO-RB ........................................................................ 281A_ERIC-HLR_R12-0_MOD_OBR .............................................................................. 282A_ERIC-HLR_R12-0_MOD_OBR-RB ........................................................................ 283A_ERIC-HLR_R12-0_MOD_OBRF ............................................................................ 284A_ERIC-HLR_R12-0_MOD_OBRF-RB ...................................................................... 285A_ERIC-HLR_R12-0_MOD_OBZO ............................................................................ 286A_ERIC-HLR_R12-0_MOD_OBZO-RB ...................................................................... 287A_ERIC-HLR_R12-0_MOD_OFA ............................................................................... 288A_ERIC-HLR_R12-0_MOD_OFA-RB ......................................................................... 289A_ERIC-HLR_R12-0_MOD_OICK ............................................................................. 290A_ERIC-HLR_R12-0_MOD_OICK-RB ....................................................................... 291A_ERIC-HLR_R12-0_MOD_PICI ............................................................................... 292A_ERIC-HLR_R12-0_MOD_PICI-RB ......................................................................... 293A_ERIC-HLR_R12-0_MOD_PWD .............................................................................. 294A_ERIC-HLR_R12-0_MOD_PWD-RB ........................................................................ 295A_ERIC-HLR_R12-0_MOD_REGSER ....................................................................... 296A_ERIC-HLR_R12-0_MOD_REGSER-RB ................................................................. 297A_ERIC-HLR_R12-0_MOD_SCHAR .......................................................................... 298A_ERIC-HLR_R12-0_MOD_SCHAR-RB ................................................................... 299A_ERIC-HLR_R12-0_MOD_SOCB ............................................................................ 300

Page 8: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

viii Oracle Corporation

A_ERIC-HLR_R12-0_MOD_SOCB-RB ...................................................................... 301A_ERIC-HLR_R12-0_MOD_SOCFB .......................................................................... 302A_ERIC-HLR_R12-0_MOD_SOCFB-RB .................................................................... 303A_ERIC-HLR_R12-0_MOD_SOCFRY ....................................................................... 304A_ERIC-HLR_R12-0_MOD_SOCFRY-RB ................................................................. 305A_ERIC-HLR_R12-0_MOD_SOCLIR ......................................................................... 306A_ERIC-HLR_R12-0_MOD_SOCLIR-RB ................................................................... 307A_ERIC-HLR_R12-0_MOD_SODCF .......................................................................... 308A_ERIC-HLR_R12-0_MOD_SODCF-RB ................................................................... 309A_ERIC-HLR_R12-0_MOD_SOSDCF ....................................................................... 310A_ERIC-HLR_R12-0_MOD_SOSDCF-RB ................................................................. 311A_ERIC-HLR_R12-0_MOD_STYPE .......................................................................... 312A_ERIC-HLR_R12-0_MOD_STYPE-RB .................................................................... 313A_ERIC-HLR_R12-0_MOD_TICK .............................................................................. 314A_ERIC-HLR_R12-0_MOD_TICK-RB ........................................................................ 315A_ERIC-HLR_R12-0_REM_AMSISDN ...................................................................... 316A_ERIC-HLR_R12-0_REM_APN ............................................................................... 317A_ERIC-HLR_R12-0_REM_BAIC .............................................................................. 318A_ERIC-HLR_R12-0_REM_BAOC ............................................................................ 319A_ERIC-HLR_R12-0_REM_BICRO ........................................................................... 320A_ERIC-HLR_R12-0_REM_BOIC .............................................................................. 321A_ERIC-HLR_R12-0_REM_BOIEXH ......................................................................... 322A_ERIC-HLR_R12-0_REM_CAMEL .......................................................................... 323A_ERIC-HLR_R12-0_REM_CAW .............................................................................. 327A_ERIC-HLR_R12-0_REM_CFB ............................................................................... 328A_ERIC-HLR_R12-0_REM_CFNRC .......................................................................... 329A_ERIC-HLR_R12-0_REM_CFNRY .......................................................................... 330A_ERIC-HLR_R12-0_REM_CFS ............................................................................... 331A_ERIC-HLR_R12-0_REM_CFU ............................................................................... 332A_ERIC-HLR_R12-0_REM_CUG ............................................................................... 333A_ERIC-HLR_R12-0_REM_DCF ............................................................................... 334A_ERIC-HLR_R12-0_REM_FEATURES ................................................................... 335A_ERIC-HLR_R12-0_REM_GMLC ............................................................................ 336A_ERIC-HLR_R12-0_REM_GPRS ............................................................................ 338A_ERIC-HLR_R12-0_REM_LOC-SERVICES ............................................................ 339A_ERIC-HLR_R12-0_REM_SPN ............................................................................... 341A_ERIC-HLR_R12-0_REM_SMS-SPAM-DATA ......................................................... 343A_ERIC-HLR_R12-0_RESET_LOCATION ................................................................ 344

User exit types .................................................................................................................. 345Understanding user exit type XML files ...................................................................... 345

User defined ASDL exit types ........................................................................................... 347UserExitType.xml .............................................................................................................. 376

4. Service Definition ..................................................................................... 455CSDL commands .............................................................................................................. 457

C_ERIC-HLR_R12-0_ACT_BAIC ............................................................................... 463C_ERIC-HLR_R12-0_ACT_BAOC ............................................................................. 463C_ERIC-HLR_R12-0_ACT_BICRO ............................................................................ 464

Page 9: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide ix

C_ERIC-HLR_R12-0_ACT_BOIC .............................................................................. 465C_ERIC-HLR_R12-0_ACT_BOIEXH .......................................................................... 465C_ERIC-HLR_R12-0_ACT_BS21 .............................................................................. 466C_ERIC-HLR_R12-0_ACT_BS22 .............................................................................. 467C_ERIC-HLR_R12-0_ACT_BS23 .............................................................................. 468C_ERIC-HLR_R12-0_ACT_BS24 .............................................................................. 468C_ERIC-HLR_R12-0_ACT_BS25 .............................................................................. 469C_ERIC-HLR_R12-0_ACT_BS26 .............................................................................. 470C_ERIC-HLR_R12-0_ACT_BS2G .............................................................................. 470C_ERIC-HLR_R12-0_ACT_BS31 .............................................................................. 471C_ERIC-HLR_R12-0_ACT_BS32 .............................................................................. 472C_ERIC-HLR_R12-0_ACT_BS33 .............................................................................. 472C_ERIC-HLR_R12-0_ACT_BS34 .............................................................................. 473C_ERIC-HLR_R12-0_ACT_BS3G .............................................................................. 474C_ERIC-HLR_R12-0_ACT_CAW ............................................................................... 474C_ERIC-HLR_R12-0_ACT_CFB ................................................................................ 475C_ERIC-HLR_R12-0_ACT_CFNRC ........................................................................... 476C_ERIC-HLR_R12-0_ACT_CFNRY ........................................................................... 476C_ERIC-HLR_R12-0_ACT_CFU ................................................................................ 477C_ERIC-HLR_R12-0_ACT_CLIP ............................................................................... 478C_ERIC-HLR_R12-0_ACT_CLIR ............................................................................... 478C_ERIC-HLR_R12-0_ACT_COLP ............................................................................. 479C_ERIC-HLR_R12-0_ACT_COLR ............................................................................. 480C_ERIC-HLR_R12-0_ACT_EMLPP ........................................................................... 480C_ERIC-HLR_R12-0_ACT_HOLD ............................................................................. 481C_ERIC-HLR_R12-0_ACT_ICI ................................................................................... 482C_ERIC-HLR_R12-0_ACT_MPTY ............................................................................. 482C_ERIC-HLR_R12-0_ACT_OBA ................................................................................ 483C_ERIC-HLR_R12-0_ACT_OBOPRE ........................................................................ 484C_ERIC-HLR_R12-0_ACT_OBOPRI ......................................................................... 484C_ERIC-HLR_R12-0_ACT_OBSSM .......................................................................... 485C_ERIC-HLR_R12-0_ACT_OBZI ............................................................................... 486C_ERIC-HLR_R12-0_ACT_OIN ................................................................................. 487C_ERIC-HLR_R12-0_ACT_OSB1 .............................................................................. 487C_ERIC-HLR_R12-0_ACT_OSB2 .............................................................................. 488C_ERIC-HLR_R12-0_ACT_OSB3 .............................................................................. 489C_ERIC-HLR_R12-0_ACT_OSB4 .............................................................................. 489C_ERIC-HLR_R12-0_ACT_PAI ................................................................................. 490C_ERIC-HLR_R12-0_ACT_SOCFRC ........................................................................ 491C_ERIC-HLR_R12-0_ACT_SOCFU ........................................................................... 491C_ERIC-HLR_R12-0_ACT_SOCLIP .......................................................................... 492C_ERIC-HLR_R12-0_ACT_SOCOLP ........................................................................ 492C_ERIC-HLR_R12-0_ACT_TIN ................................................................................. 493C_ERIC-HLR_R12-0_ACT_TS11 ............................................................................... 494C_ERIC-HLR_R12-0_ACT_TS21 ............................................................................... 494C_ERIC-HLR_R12-0_ACT_TS22 ............................................................................... 495C_ERIC-HLR_R12-0_ACT_TS61 ............................................................................... 496C_ERIC-HLR_R12-0_ACT_TS62 ............................................................................... 497

Page 10: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

x Oracle Corporation

C_ERIC-HLR_R12-0_ACT_TSMO ............................................................................. 497C_ERIC-HLR_R12-0_ADD_AMSISDN ...................................................................... 498C_ERIC-HLR_R12-0_ADD_APN ............................................................................... 499C_ERIC-HLR_R12-0_ADD_BAIC .............................................................................. 499C_ERIC-HLR_R12-0_ADD_BAOC ............................................................................. 500C_ERIC-HLR_R12-0_ADD_BICRO ........................................................................... 501C_ERIC-HLR_R12-0_ADD_BOIC .............................................................................. 502C_ERIC-HLR_R12-0_ADD_BOIEXH ......................................................................... 502C_ERIC-HLR_R12-0_ADD_CAMEL .......................................................................... 503C_ERIC-HLR_R12-0_ADD_CAW .............................................................................. 507C_ERIC-HLR_R12-0_ADD_CFB ................................................................................ 507C_ERIC-HLR_R12-0_ADD_CFNRC .......................................................................... 509C_ERIC-HLR_R12-0_ADD_CFNRY .......................................................................... 510C_ERIC-HLR_R12-0_ADD_CFS ................................................................................ 511C_ERIC-HLR_R12-0_ADD_CFU ............................................................................... 512C_ERIC-HLR_R12-0_ADD_CUG ............................................................................... 513C_ERIC-HLR_R12-0_ADD_DCF ............................................................................... 514C_ERIC-HLR_R12-0_ADD_FEATURES .................................................................... 516C_ERIC-HLR_R12-0_ADD_GMLC ............................................................................ 517C_ERIC-HLR_R12-0_ADD_GPRS ............................................................................. 517C_ERIC-HLR_R12-0_ADD_LOC-SERVICES ............................................................ 519C_ERIC-HLR_R12-0_ADD_SMS-SPAM-DATA ......................................................... 521C_ERIC-HLR_R12-0_ADD_SPN ............................................................................... 522C_ERIC-HLR_R12-0_CREATE_MULTIPLE-SUBSCRIPTION .................................. 523C_ERIC-HLR_R12-0_CREATE_SUBSCRIPTION ..................................................... 524C_ERIC-HLR_R12-0_DEACT_BAIC .......................................................................... 525C_ERIC-HLR_R12-0_DEACT_BAOC ........................................................................ 526C_ERIC-HLR_R12-0_DEACT_BICRO ....................................................................... 527C_ERIC-HLR_R12-0_DEACT_BOIC ......................................................................... 527C_ERIC-HLR_R12-0_DEACT_BOIEXH ..................................................................... 528C_ERIC-HLR_R12-0_DEACT_BS21 ......................................................................... 529C_ERIC-HLR_R12-0_DEACT_BS22 ......................................................................... 530C_ERIC-HLR_R12-0_DEACT_BS23 ......................................................................... 530C_ERIC-HLR_R12-0_DEACT_BS24 ......................................................................... 531C_ERIC-HLR_R12-0_DEACT_BS25 ......................................................................... 532C_ERIC-HLR_R12-0_DEACT_BS26 ......................................................................... 532C_ERIC-HLR_R12-0_DEACT_BS2G ......................................................................... 533C_ERIC-HLR_R12-0_DEACT_BS31 ......................................................................... 534C_ERIC-HLR_R12-0_DEACT_BS32 ......................................................................... 534C_ERIC-HLR_R12-0_DEACT_BS33 ......................................................................... 535C_ERIC-HLR_R12-0_DEACT_BS34 ......................................................................... 536C_ERIC-HLR_R12-0_DEACT_BS3G ......................................................................... 536C_ERIC-HLR_R12-0_DEACT_CAW .......................................................................... 537C_ERIC-HLR_R12-0_DEACT_CFB ........................................................................... 538C_ERIC-HLR_R12-0_DEACT_CFNRC ...................................................................... 538C_ERIC-HLR_R12-0_DEACT_CFNRY ...................................................................... 539C_ERIC-HLR_R12-0_DEACT_CFU ........................................................................... 540C_ERIC-HLR_R12-0_DEACT_CLIP .......................................................................... 540

Page 11: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide xi

C_ERIC-HLR_R12-0_DEACT_CLIR .......................................................................... 541C_ERIC-HLR_R12-0_DEACT_COLP ........................................................................ 542C_ERIC-HLR_R12-0_DEACT_COLR ........................................................................ 542C_ERIC-HLR_R12-0_DEACT_EMLPP ...................................................................... 543C_ERIC-HLR_R12-0_DEACT_HOLD ........................................................................ 544C_ERIC-HLR_R12-0_DEACT_ICI .............................................................................. 544C_ERIC-HLR_R12-0_DEACT_MPTY ........................................................................ 545C_ERIC-HLR_R12-0_DEACT_OBA ........................................................................... 546C_ERIC-HLR_R12-0_DEACT_OBOPRE ................................................................... 546C_ERIC-HLR_R12-0_DEACT_OBOPRI .................................................................... 547C_ERIC-HLR_R12-0_DEACT_OBSSM ..................................................................... 548C_ERIC-HLR_R12-0_DEACT_OBZI .......................................................................... 549C_ERIC-HLR_R12-0_DEACT_OIN ............................................................................ 549C_ERIC-HLR_R12-0_DEACT_OSB1 ......................................................................... 550C_ERIC-HLR_R12-0_DEACT_OSB2 ......................................................................... 551C_ERIC-HLR_R12-0_DEACT_OSB3 ......................................................................... 551C_ERIC-HLR_R12-0_DEACT_OSB4 ......................................................................... 552C_ERIC-HLR_R12-0_DEACT_PAI ............................................................................ 553C_ERIC-HLR_R12-0_DEACT_SOCFRC ................................................................... 553C_ERIC-HLR_R12-0_DEACT_SOCFU ...................................................................... 554C_ERIC-HLR_R12-0_DEACT_SOCLIP ..................................................................... 555C_ERIC-HLR_R12-0_DEACT_SOCOLP ................................................................... 556C_ERIC-HLR_R12-0_DEACT_TIN ............................................................................ 556C_ERIC-HLR_R12-0_DEACT_TS11 .......................................................................... 557C_ERIC-HLR_R12-0_DEACT_TS21 .......................................................................... 558C_ERIC-HLR_R12-0_DEACT_TS22 .......................................................................... 558C_ERIC-HLR_R12-0_DEACT_TS61 .......................................................................... 559C_ERIC-HLR_R12-0_DEACT_TS62 .......................................................................... 560C_ERIC-HLR_R12-0_DEACT_TSMO ........................................................................ 560C_ERIC-HLR_R12-0_DELETE_MULTIPLE-SUBSCRIPTION ................................... 561C_ERIC-HLR_R12-0_DELETE_SUBSCRIPTION ..................................................... 562C_ERIC-HLR_R12-0_GET_CAMEL ........................................................................... 563C_ERIC-HLR_R12-0_GET_PDP ................................................................................ 564C_ERIC-HLR_R12-0_GET_SERVICE-ADDRESSES ................................................ 565C_ERIC-HLR_R12-0_GET_SUBSCRIBER ................................................................ 565C_ERIC-HLR_R12-0_GET_SUBSCRIPTION ............................................................ 566C_ERIC-HLR_R12-0_MODIFY_IMSI ......................................................................... 567C_ERIC-HLR_R12-0_MODIFY_IMSI-CANCEL ......................................................... 568C_ERIC-HLR_R12-0_MODIFY_IMSI-CHANGEOVER .............................................. 569C_ERIC-HLR_R12-0_MODIFY_IMSI-DEL-DATA ...................................................... 570C_ERIC-HLR_R12-0_MODIFY_MULTIPLE-SUBSCRIPTION ................................... 571C_ERIC-HLR_R12-0_MODIFY_LOC-SERVICES ...................................................... 572C_ERIC-HLR_R12-0_MODIFY_SUBSCRIPTION ..................................................... 574C_ERIC-HLR_R12-0_MOD_ACC .............................................................................. 575C_ERIC-HLR_R12-0_MOD_AOC .............................................................................. 575C_ERIC-HLR_R12-0_MOD_BS2F ............................................................................. 576C_ERIC-HLR_R12-0_MOD_BS3F ............................................................................. 577C_ERIC-HLR_R12-0_MOD_CAMEL .......................................................................... 578

Page 12: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

xii Oracle Corporation

C_ERIC-HLR_R12-0_MOD_CAMEL-EXTENDED ..................................................... 581C_ERIC-HLR_R12-0_MOD_CAPL ............................................................................. 589C_ERIC-HLR_R12-0_MOD_CAT ............................................................................... 590C_ERIC-HLR_R12-0_MOD_DBSG ............................................................................ 591C_ERIC-HLR_R12-0_MOD_DEMLPP ....................................................................... 592C_ERIC-HLR_R12-0_MOD_FEATURES ................................................................... 592C_ERIC-HLR_R12-0_MOD_GPRS ............................................................................ 594C_ERIC-HLR_R12-0_MOD_HPN .............................................................................. 595C_ERIC-HLR_R12-0_MOD_MEMLPP ....................................................................... 596C_ERIC-HLR_R12-0_MOD_NAM .............................................................................. 597C_ERIC-HLR_R12-0_MOD_OBI ................................................................................ 598C_ERIC-HLR_R12-0_MOD_OBO .............................................................................. 599C_ERIC-HLR_R12-0_MOD_OBR .............................................................................. 599C_ERIC-HLR_R12-0_MOD_OBRF ............................................................................ 600C_ERIC-HLR_R12-0_MOD_OBZO ............................................................................ 601C_ERIC-HLR_R12-0_MOD_OFA ............................................................................... 602C_ERIC-HLR_R12-0_MOD_OICK ............................................................................. 602C_ERIC-HLR_R12-0_MOD_PICI ............................................................................... 603C_ERIC-HLR_R12-0_MOD_PWD .............................................................................. 604C_ERIC-HLR_R12-0_MOD_REGSER ....................................................................... 605C_ERIC-HLR_R12-0_MOD_SCHAR ......................................................................... 605C_ERIC-HLR_R12-0_MOD_SOCB ............................................................................ 606C_ERIC-HLR_R12-0_MOD_SOCFB .......................................................................... 607C_ERIC-HLR_R12-0_MOD_SOCFRY ....................................................................... 608C_ERIC-HLR_R12-0_MOD_SOCLIR ......................................................................... 608C_ERIC-HLR_R12-0_MOD_SODCF ......................................................................... 609C_ERIC-HLR_R12-0_MOD_SOSDCF ....................................................................... 610C_ERIC-HLR_R12-0_MOD_STYPE .......................................................................... 611C_ERIC-HLR_R12-0_MOD_TICK .............................................................................. 612C_ERIC-HLR_R12-0_REM_AMSISDN ...................................................................... 613C_ERIC-HLR_R12-0_REM_APN ............................................................................... 613C_ERIC-HLR_R12-0_REM_BAIC .............................................................................. 614C_ERIC-HLR_R12-0_REM_BAOC ............................................................................ 615C_ERIC-HLR_R12-0_REM_BICRO ........................................................................... 616C_ERIC-HLR_R12-0_REM_BOIC .............................................................................. 616C_ERIC-HLR_R12-0_REM_BOIEXH ......................................................................... 617C_ERIC-HLR_R12-0_REM_CAMEL .......................................................................... 618C_ERIC-HLR_R12-0_REM_CAW .............................................................................. 621C_ERIC-HLR_R12-0_REM_CFB ............................................................................... 622C_ERIC-HLR_R12-0_REM_CFNRC .......................................................................... 622C_ERIC-HLR_R12-0_REM_CFNRY .......................................................................... 623C_ERIC-HLR_R12-0_REM_CFS ............................................................................... 624C_ERIC-HLR_R12-0_REM_CFU ............................................................................... 625C_ERIC-HLR_R12-0_REM_CUG .............................................................................. 626C_ERIC-HLR_R12-0_REM_DCF ............................................................................... 626C_ERIC-HLR_R12-0_REM_FEATURES ................................................................... 627C_ERIC-HLR_R12-0_REM_GMLC ............................................................................ 628C_ERIC-HLR_R12-0_REM_GPRS ............................................................................ 629

Page 13: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide xiii

C_ERIC-HLR_R12-0_REM_LOC-SERVICES ............................................................ 630C_ERIC-HLR_R12-0_REM_SPN ............................................................................... 632C_ERIC-HLR_R12-0_REM_SMS-SPAM-DATA ........................................................ 633C_ERIC-HLR_R12-0_RESET_LOCATION ................................................................ 634

5. Configuring ASAP to Support Additional NE Instances ...................... 635Extracting source files ....................................................................................................... 638

Loading a new XML file .............................................................................................. 638

Page 14: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

xiv Oracle Corporation

Page 15: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 1

1

Cartridge Overview

ASAP cartridges are discrete software components that are developed for the ASAP product. An ASAP cartridge offers specific domain behavior on top of the core ASAP software, and provides the configuration that supports a set of services on a network element (NE).

An ASAP cartridge is not a stand-alone component, but operates in conjunction with the ASAP core product. ASAP cartridges offer the following benefits:

Reduced Time to Market - time to market of new services is reduced through simplified development, implementation, and extension of cartridges on customer sites.Extendable - cartridges can be extended to include additional services and components that deliver business value, without requiring changes to the original cartridge.Simplified Effort - the effort and technical knowledge that is required to perform customizations is reduced.Ease of Installation - cartridges can be installed into an ASAP environment without interfering with the existing install base.

An ASAP cartridge can be used to configure ASAP to provision the following:

NEs from a specific vendor, such as Nortel or Lucent.Technologies, such as Asynchronous Transfer Mode (ATM) and Frame Relay switches, or Internet Protocol (IP) routers.Services that are supported on the NE, such as ATM, IP Virtual Private Networks (VPN), Wireless, or Optical.

An ASAP cartridge supports a particular set of services on an NE. These services are independent of customer-specific service definitions. Professional Services or systems integrators can perform extensions to the cartridge to support customer-specific requirements.

Cartridge contentAn ASAP cartridge contains the following:

Sample NE ConfigurationA set of scripts, such as State Tables or Java methods

Cartridges are designed for a specific technology, software load, and service.

Page 16: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 1: Cartridge Overview

2 Oracle Corporation

A set of atomic actions in the form of Atomic Service Description Layer (ASDL) commandsA set of Common Service Description Layer (CSDL) commands that form meaningful servicesSample work ordersInstallation scripts

PrerequisitesSystem integrators such as managers, designers, programmers, and testers who are responsible for the adaptation and integration of ASAP-based solutions should use this manual as a reference. It assumes that readers possess the following skills:

A knowledge of ASAP programming conceptsA good working knowledge of the UNIX operating systemA thorough understanding of service and network provisioningFamiliarity with telecommunications

About this guideThis guide provides a detailed description of the Ericsson HLR cartridge. It contains overview and technical information to assist with extending and integrating the cartridge into a customer environment.

The scope of this guide includes ASAP as it pertains to the use of this cartridge. It is not intended to be a complete ASAP reference guide.

For additional information when using this cartridge, refer to the following supporting documentation:

Activation documentation set—for detailed information on the ASAP component.

The Ericsson HLR cartridge provides the ASAP service configuration and network element (NE) interface to activate subscriber services on NE_ERIC-HLR_R12-0-HOST NEs.

Page 17: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Services, features, and options

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 3

Services, features, and optionsThis cartridge supports the following services:

Table 1: Supported services

Service Description

Create HLR Subscription Creates a GSM subscription with or without a pre-defined profile.

Delete HLR Subscription Deletes a GSM subscription.

Modify HLR Subscription Modifies a GSM subscription based on a pre-defined profile.

Get Camel Queries the CAMEL subscription data.

Get Subscription Queries a HLR subscription.

Get PDP Queries packet data protocol context data for a series of connected subscribers.

Get Subscriber Queries the HLR subscriber.

Get Service Addresses Queries all the Service Center addresses stored in the message waiting data list.

Modify IMSI Replaces IMSI for GSM subscriber.

Modify IMSI - Change Over Modifies the changeover date of the IMSI of HLR subscriber.

Modify IMSI - DEL Data Removes the old data associated with the old IMSI of HLR subscriber.

Modify IMSI - Cancel Cancels the IMSI changeover before the new IMSI active of HLR subscriber.

BS21 Activates/Deactivates the data circuit asynchronous 300 baud feature.

BS22 Activates/Deactivates the data circuit asynchronous 1200 baud feature.

BS23 Activates/Deactivates the data circuit asynchronous 1200-75 baud feature.

BS24 Activates/Deactivates the data circuit asynchronous 2400 baud feature.

BS25 Activates/Deactivates the data circuit asynchronous 4800 baud feature.

BS26 Activates/Deactivates the data circuit asynchronous 9600 baud feature.

BS2F Modifies the fall-back asynchronous bearer service feature.

BS2G Activates/Deactivates the general asynchronous bearer service feature.

Page 18: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 1: Cartridge Overview

4 Oracle Corporation

BS31 Activates/Deactivates the data circuit synchronous 1200 baud feature.

BS32 Activates/Deactivates the data circuit synchronous 2400 baud feature.

BS33 Activates/Deactivates the data circuit synchronous 4800 baud feature.

BS34 Activates/Deactivates the data circuit synchronous 9600 baud feature.

Modify BS3F Modifies the fall-back synchronous bearer service feature.

BS3G Activates/Deactivates the general synchronous bearer service feature.

Modify NAM Modifies the network access mode feature.

TS11 Activates/Deactivates the basic telephony feature.

TS21 Activates/Deactivates the short message MT/PP feature.

TS22 Activates/Deactivates the short message MO/PP feature.

TS61 Activates/Deactivates the alternate speech/fax group 3 transparent feature.

TS62 Activates/Deactivates the automatic facsimile group 3 feature.

TSMO Activates/Deactivates the transfer of short message option feature.

BAIC Adds/Removes and Activates/Deactivates the barring of all incoming calls feature.

BAOC Adds/Removes and Activates/Deactivates the barring of all outgoing calls feature.

BICRO Adds/Removes and Activates/Deactivates the barring of all incoming calls when roaming outside the home PLMN country feature.

BOIC Adds/Removes and Activates/Deactivates the barring of all outgoing international calls feature.

BOIEXH Adds/Removes and Activates/Deactivates the barring of all outgoing international calls except those directed to the home PLMN country feature.

CFS Adds/Removes call forwarding services feature.

CFB Adds/Removes and Activates/Deactivates the call forwarding on mobile subscriber busy feature.

Table 1: Supported services

Service Description

Page 19: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Services, features, and options

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 5

CFNRC Adds/Removes and Activates/Deactivates the call forwarding on mobile subscriber not reachable feature.

CFNRY Adds/Removes and Activates/Deactivates the call forwarding on no reply feature.

CFU Adds/Removes and Activates/Deactivates the call forwarding unconditional feature.

DCF Adds/Removes the default call forwarding feature.

SPN Adds/Removes the single personal number feature.

CLIP Activates/Deactivates the calling line identification presentation feature.

CLIR Activates/Deactivates the calling line identification restriction feature.

COLP Activates/Deactivates the connected line identification presentation feature.

COLR Activates/Deactivates the connected line identification restriction feature.

OBA Activates/Deactivates the all incoming and outgoing calls feature.

Modify OBI Modifies all incoming calls feature.

Modify OBO Modifies all outgoing calls feature.

OBOPRE Activates/Deactivates the outgoing premium rate calls (Entertainment) feature.

OBOPRI Activates/Deactivates the outgoing premium rate calls (Information) feature.

OBSSM Activates/Deactivates the supplementary service management feature.

OBR Modifies the roaming feature.

Modify OBRF Modifies the roaming of registration of forwarded-to number feature.

OBZI Activates/Deactivates the incoming inter-zonal calls feature.

Modify OBZO Modifies the outgoing inter-zonal calls feature.

OSB1 Activates/Deactivates the specific barring in HPLMN (Type1) feature.

OSB2 Activates/Deactivates the specific barring in HPLMN (Type 2) feature.

OSB3 Activates/Deactivates the specific barring in HPLMN (Type 3).

Table 1: Supported services

Service Description

Page 20: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 1: Cartridge Overview

6 Oracle Corporation

OSB4 Activates/Deactivates the specific barring in HPLMN (Type 4) feature.

Modify SOCB Modifies the control of barring services feature.

Modify SOCFB Modifies the call forwarding on mobile subscriber busy feature.

SOCFRC Activates/Deactivates the call forwarding on mobile subscriber not reachable feature.

Modify SOCFRY Modifies the call forwarding on no reply feature.

SOCFU Activates/Deactivates the call forwarding unconditional feature.

SOCLIP Activates/Deactivates the calling line identification presentation feature.

Modify SOCLIR Modifies the calling line identification restriction feature.

SOCOLP Activates/Deactivates the connected line identification presentation feature.

Modify SODCF Modifies the default call forwarding feature.

Modify SOSDCF Modifies the supplementary default call forwarding feature.

CUG Adds/Removes the closed user group feature.

CAMEL Adds/Removes/Modifies the customized applications for mobile network enhanced logic feature.

Modify CAMEL Extended Modifies the CAMEL extended information feature.

GPRS Adds/Removes/Modifies the general packet radio service feature.

GMLC Adds/Removes the GMLC address feature.

LOCATION SERVICES Adds/Removes the location services feature.

APN Adds/Removes the APN feature.

Modify ACC Modifies the account code feature.

AMSISDN Adds/Removes the additional MSISDN feature.

Modify AOC Modifies the advice of charge feature.

Modify CAPL Modifies the channel allocation priority level feature.

Modify CAT Modifies the subscriber category feature.

Table 1: Supported services

Service Description

Page 21: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Services, features, and options

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 7

CAW Adds/Removes and Activates/Deactivates the call waiting feature.

Modify DBSG Modifies the default basic service group feature.

Modify DEMLPP Modifies the default enhanced multi-level precedence and pre-emption feature.

EMLPP Activates/Deactivates the enhanced multi-level precedence and pre-emption feature.

HOLD Activates/Deactivates the call hold feature.

Modify HPN Modifies the high penetration notification feature.

ICI Activates/Deactivates the immediate call itemization feature.

Modify MEMLPP Modifies the enhanced multi-level precedence and pre-emption. maximum priority level feature.

MPTY Activates/Deactivates the multi party service feature.

Modify OFA Modifies the origin for forwarded-to number analysis feature.

Modify OICK Modifies the originating intelligent network category key feature.

OIN Activates/Deactivates the originating intelligent network feature.

PAI Activates/Deactivates the positioning allowed indicator feature.

Modify PICI Modifies the primary inter-exchange carrier identity feature.

Modify PWD Modifies the subscriber password feature.

Modify REGSER Modifies the regional service feature.

Modify SCHAR Modifies the subscriber charging characteristics feature.

Modify STYPE Modifies the subscription type feature.

TIN Activates/Deactivates the terminating intelligent network feature.

Modify TICK Modifies the terminating intelligent network category key feature.

Add features Adds all features using MML optimization.

Remove features Removes all features using MML optimization.

Table 1: Supported services

Service Description

Page 22: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 1: Cartridge Overview

8 Oracle Corporation

Hardware and software requirementsThe following sections contain the high-level software and hardware environment requirements for provisioning subscriber services on authentication center including:

Network element (NE) interfaceASAP version

Network element (NE) interfaceThe following database tables in SARM are configured to support the NE configuration:

tbl_host_cllitbl_clli_routetbl_comm_paramtbl_resource_pooltbl_ne_config

ASAP versionThis cartridge was developed and tested using ASAP version 4.7.2.

For more information on the operating environment of this ASAP version, refer to the ASAP version 4.7.2 Release Record.

Connecting to the NEThis cartridge uses telnet protocol over TCP/IP.

Modify features Modifies all features using MML optimization.

Reset Location Sets the location of the mobile subscriber to unknown.

Table 1: Supported services

Service Description

Page 23: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 9

2

Installing and Testing the Cartridge

This chapter describes the following procedures related to installing and testing the cartridge:

Downloading the cartridgeInstalling the cartridge using scriptsUninstalling the cartridge using scriptsTesting the cartridge installationDeployment of the cartridge using StudioUninstallation and Undeployment of the cartridge using Studio

Downloading the cartridgeBefore you can install the cartridge, you must use the internet to download the cartridge’s TAR file from Oracle’s Customer Portal.

Use the following instructions to download, then unTAR the TAR file.

To download the TAR file

1. Login to Oracle MetaLink internet home page (http://www.metalink.oracle.com).

2. Download the cartridge patch to your workstation.

To unTAR the TAR file

1. On your workstation, create a repository directory—the naming of which is your choice.mkdir <repository dir>

2. Copy the TAR file to the repository directory.

3. Untar EricssonHLR_12_X_X_R1_1_0.<buildId>.tar.tar xvf EricssonHLR_12_X_X_R1_1_0.<buildId>.tar

The directory structure in the repository directory should look like the following illustration. (this illustration describes the minimum required structure; you can enhance this directory structure with additional directories based on your requirements and deliverables). <repository_directory>

/README/installCartridge/uninstallCartridge

Page 24: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 2: Installing and Testing the Cartridge

10 Oracle Corporation

/EricssonHLR_R12-0.sar

Starting ASAPBefore installing the cartridge, ensure that ASAP is running.

To start ASAP

1. To start ASAP, execute the following script:start_asap_sys -d

2. Ensure the ASAP Daemon (DAEM$ENV_ID) is running by checking the ASAP status using the ASAP script “status”.

3. Check whether the WebLogic instance for this ASAP environment is running. If not, start the WebLogic instance.

The ASAP Administration Guide contains more information on starting ASAP, the ASAP Daemon, and WebLogic.

Page 25: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Installing the cartridge using scripts

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 11

Installing the cartridge using scriptsRun the installation script installCartridge to install the cartridge. The script executes the following tasks:

Configures the Ericsson HLR-specific NE using the SACT. Deploys the Ericsson HLR cartridge service model (only if the Ericsson HLR service model is not yet deployed) using the Service Activation Deployment Tool (SADT).Copies the Ericsson HLR-specific jar files to the ASAP environment.Loads the sample work orders to the SRP database.

For information on the SACT and the SADT, refer to the ASAP Administration Guide.

To install the cartridge

1. Run the installCartridge script from /EricssonHLR_R12-0. At the prompt, type:installCartridge EricssonHLR_R12-0.sar

2. The script prompts you for the values of the following WebLogic login parameters:

WebLogic HostnameWebLogic HTTP PortWebLogic Login User IDWebLogic Login Password

The script loads the NEP-NE configuration and the CSDL-ASDL configuration to the SARM database, and loads sample work orders to the SRP database. The script also copies the cartridge-specific jar files and cpp library file to the ASAP environment.

3. Copy studio_2_6_0.jar file to the $ASAP_BASE/lib directory.

4. Add ${ASAP_BASE}/lib/studio_2_6_0.jar to the CLASSPATH in the JInterpreter file under $ASAP_BASE/programs directory.

5. Restart ASAP to upload the cartridge configuration into ASAP.

Uninstalling the cartridge using scriptsRun the uninstallation script uninstallCartridge to uninstall the Ericsson HLR cartridge. This script is located under /EricssonHLR_R12-0. The script executes the following tasks:

Unconfigures Ericsson HLR-specific NEs using the SACT. Undeploys the Ericsson HLR cartridge service model (only if the Ericsson HLR service model is already deployed) using the Service Activation Deployment Tool (SADT). Removes the Ericsson HLR-specific jar files from the ASAP environment.

For more information on the SACT and the SADT, refer to the ASAP Administration Guide.

Page 26: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 2: Installing and Testing the Cartridge

12 Oracle Corporation

To uninstall the cartridge

1. Run the uninstallCartridge script from /EricssonHLR_R12-0. At the prompt, type:uninstallCartridge EricssonHLR_R12-0.<timestamp>.sar

2. The script prompts you for the values of the following parameters:

WebLogic HostnameWebLogic HTTP PortWebLogic Login User IDWebLogic Login Password

The script unloads the NEP-NE configuration and CSDL-ASDL configuration from SARM database. It also removes the cartridge specific jar files file from the ASAP environment.

Testing the cartridge installationTo test this cartridge installation, you need to know about the network element (NE), services, and basic Activation configuration. You may need to perform adjustments to provision a service for a specific NE, network, or connectivity configuration.

You can test the cartridge installation using one of the following methods:

Loopback mode—does not actually connect to or send commands to the NE.Live mode—connects to and sends commands to a live NE.

Configuring loopback and live mode parametersSet the following variables to test the cartridge in loopback or live testing modes.

Loopback mode

Set the following parameter to test the cartridge in loopback mode.

Table 2: Loopback Mode Parameter Settings

Configuration Variable Parameter Settings Location

LOOPBACK_ON 1 (default setting) ASAP.cfg

Page 27: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Testing the cartridge installation

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 13

Live mode

Set the following parameter to test the cartridge in live mode.

Communication parameters

The following are the list of parameters for the sample NE configuration XML used by SACT.

Modifying NE_ERIC-HLR_R12-0-HOST.xmlUse the following procedure to modify NE_ERIC-HLR_R12-0-HOST.xml.

Table 3: Live Mode Parameter Settings

Configuration Variable Parameter Settings Location

LOOPBACK_ON 0 ASAP.cfg

Table 4: Communication parameters

param_label param_value param_desc

HOST_IPADDR 172.28.144.120 The network IP address for the NE host.

PORT 5000 Telnet port.

HOST_USERID Userid Login user name.

HOST_PASSWORD password Password for the user.

LOGIN_PROMPT USERCODE: Login prompt from the NE.

PASSWORD_PROMPT PASSWORD: Password prompt from the NE.

OPEN_TIMEOUT 20 Connection timeout in seconds.

READ_TIMEOUT 30 Read timeout in seconds.

PROMPT < HLR provisioning prompt.

RESPONSELOG TRUE Flag to turn on or off response logging.

DOMAIN_PROMPT DOMAIN: Domain prompt from the NE.

DOMAIN_PASSWORD pthlr1d Domain password for the NE.

Page 28: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 2: Installing and Testing the Cartridge

14 Oracle Corporation

To modify NE_ERIC-HLR_R12-0-HOST.xml

1. Create a new source directory under /EricssonHLR_R12-0. You can give this directory any appropriate, meaningful name you want to.

mkdir <new_source_directory>

2. Copy EricssonHLR_R12-0.sar to this new source directory.

cp EricssonHLR_R12-0.sar ./<new_source_directory>

3. Change directory to <new_source_directory>.cd <new_source_directory>

4. Un-jar EricssonHLR_R12-0.sar. This extracts the contents of the sar file.

jar xvf EricssonHLR_R12-0.sar

5. Edit with the appropriate changes.

6. Create a new sar file at the <new_source_directory> level. CreateSar $PWD

7. Uninstall the cartridge using EricssonHLR_R12-0.sar in /EricssonHLR_R12-0 (That is, use the original sar file that you copied in Step 2 above—see “Uninstalling the cartridge using scripts” on page 11 for uninstallation instructions).

8. After you uninstall the cartridge, rename the sar file in /EricssonHLR_R12-0 so you have a backup copy of it.

9. Copy the new sar file from <new_source_directory> to /EricssonHLR_R12-0.

10. Reinstall the cartridge (see “Installing the cartridge using scripts” on page 11 for installation instructions).

Testing the installationThe following procedure describes the steps required to test the cartridge installation in loopback mode. We recommend that you perform the initial cartridge installation test in loopback mode.

To test in loopback mode

1. Stop ASAP by typing the following command at the UNIX prompt:stop_asap_sys -d

2. Ensure loop back mode is on. See “Loopback mode” on page 12 for a description of how to set the loop back parameter to “On”.

3. Start ASAP by typing:start_asap_sys -d

4. Send the sample work orders through the SRP Emulator by typing:

Page 29: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Deployment of the cartridge using Studio

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 15

run_suite $SRP <ctrl_password> <suite name>

You can locate the suite names in /EricssonHLR_R12-0/subscriber/sample_wo by typing:grep SUITE * | grep -v END

A list of all available suites appears.

For more information on the SRP Emulator, refer to the ASAP Administration Guide.

5. Verify the status of the sample work orders by typing:asap_utils -d l

All successful work orders returns to the 104 state.

To view the sample work orders provided with this cartridge, refer to the Ericsson HLR cartridge source.

Viewing the sample work orders

You find the sample work orders under the SampleWorkOrders directory in the sar file. The following procedure describes how to view the sample work orders.

To view the sample work orders

1. Create a repository directory, copy the sar file to the new directory and un-jar the sar file, as described by Step 1 through Step 4 in “Modifying NE_ERIC-HLR_R12-0-HOST.xml” on page 13.

2. Locate and view the sample work order files.

Deployment of the cartridge using StudioBefore installing the cartridge, ensure weblogic and ASAP are started and running.

The following are the steps involved:

1. Open Studio in design perspective. Choose Import from the File menu and select Activation Archive (SAR) under Studio Wizards to import the sar file. Browse for the path to the sar file and click Finish.

2. Create a new Service Activation Project.

3. Define a new NE Entity, based on the NE Template contained in the cartridge provided by Oracle.

4. Ensure that the primary pool of the newly created NE is different from the NE template primary pool. You can modify it, if necessary.

5. Ensure that the test work order provided with the cartridge targets the newly defined NE. If not, then modify the test work orders file(s).

Page 30: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 2: Installing and Testing the Cartridge

16 Oracle Corporation

6. Create a new Activation Environment Project from the Studio menu. (Use Studio help for more information).

7. Create Activation Environment inside the Activation Environment Project and configure the Connection Details tab with your Environment ID, Activation version and weblogic data.

8. Connect to your environment using the Connect button.

9. Select the Cartridge tab of the Activation Environment and click Add to add your projects to the environment. The cartridge and the newly created Service Activation should appear in the Cartridges list.

10. Deploy the NetworkActivation (NA) cartridge provided by Oracle. (No NE information is to be deployed with this cartridge, therefore it isn’t necessary to deploy the NEP map info).

11. Deploy the Service Activation (SA) project as follows:

On the Cartridge tab, select the necessary SA cartridge and press the Deploy button.Select the NEP Map tab of the Activation Environment. Choose the necessary NEP server from the drop-down box of the Network Element Processors.(Use Studio help for more information).Select the SA cartridge from the Network Element Processor Map and click the Deploy button.

12. Verify the SADT console to confirm the installation.

13. Go to ASAP environment.

14. Copy studio_2_6_0.jar file to the $ASAP_BASE/lib directory.

15. Add ${ASAP_BASE}/lib/studio_2_6_0.jar to the CLASSPATH in the JInterpreter file under $ASAP_BASE/programs directory.

16. Restart ASAP in order to start working with the cartridge.

Uninstallation and Undeployment of the cartridge using Studio

The following are the steps involved:

1. Connect to your environment using the Connect button.

2. Select the necessary cartridge from the Environment Cartridge list in Studio and click the Undeploy button.

3. Verify the Environment Cartridge list. The Check Box with the name of the cartridge that is disabled should be unchecked.

Page 31: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 17

3

Atomic Service Description Layer (ASDL) Commands

ASDL commands represent a set of atomic actions that ASAP can perform on a network element (NE). ASAP can combine ASDLs to create meaningful services (CSDLs) within a cartridge.

This chapter presents detailed information on the ASDL parameters that we provide with this cartridge. The following table lists and describes the type of parameter information that is included.

Table 5: ASDL parameter information

Item Description

Parameter Name Identifies the parameter that is configured for the stated service.

Description Describes the parameter.

Range Describes or lists the range of values that can be used to satisfy this parameter.

Default Value Configures a default value for the parameter so that it is not mandatory for the upstream system to provide a value.

Page 32: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

18 Oracle Corporation

For a detailed description of the Required and Optional parameter classifications, refer to the ASAP Administration Guide.

ASDL commandsThis cartridge provides the following ASDL commands:

Type Indicates one of the following parameter types:

S—Scalar, specifies the parameter label transmitted on the ASDL command. Scalar parameters are conventional name-value pair parameters.C—Compound, specifies the base name of the compound parameter transmitted on the ASDL command. A compound parameter contains structures or arrays of information that are represented by a particular structure name or compound parameter name. Each compound parameter can contain a large number of elements. If you use compound parameters, you only require a single entry in the ASAP translation tables to call the compound parameter and all its associated parameter elements.I—Indexed, identifies a parameter that contains a sequential numerical index value to tell the SARM that it should execute the same operation (for example, an ASDL command) for all occurrences of that index. Consequently, if there are several options on a particular CSDL command (OPT1, OPT2, OPT3, etc.), you can specify the OPT parameter as an indexed parameter. When you specify the OPT parameter as an indexed parameter, the SARM generates several occurrences of that same ASDL command and each command has a different value for the option being transmitted to the NEP.

For more information on parameter types, refer to the ASAP Developer Reference.

Class Indicates one of the following parameter classifications:

R—Required scalar parameterO—Optional scalar parameterC—Required compound parameterN—Optional compound parameterM—Mandatory indexed parameterI—Optional indexed parameterS—Parameter count

Table 5: ASDL parameter information

Item Description

Page 33: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 19

A_ERIC-HLR_R12-0_ACT_BAICA_ERIC-HLR_R12-0_ACT_BAOCA_ERIC-HLR_R12-0_ACT_BICROA_ERIC-HLR_R12-0_ACT_BOICA_ERIC-HLR_R12-0_ACT_BOIEXHA_ERIC-HLR_R12-0_ACT_BS21A_ERIC-HLR_R12-0_ACT_BS22A_ERIC-HLR_R12-0_ACT_BS23A_ERIC-HLR_R12-0_ACT_BS24A_ERIC-HLR_R12-0_ACT_BS25A_ERIC-HLR_R12-0_ACT_BS26A_ERIC-HLR_R12-0_ACT_BS2GA_ERIC-HLR_R12-0_ACT_BS31A_ERIC-HLR_R12-0_ACT_BS32A_ERIC-HLR_R12-0_ACT_BS33A_ERIC-HLR_R12-0_ACT_BS34A_ERIC-HLR_R12-0_ACT_BS3GA_ERIC-HLR_R12-0_ACT_CAWA_ERIC-HLR_R12-0_ACT_CFBA_ERIC-HLR_R12-0_ACT_CFNRCA_ERIC-HLR_R12-0_ACT_CFNRYA_ERIC-HLR_R12-0_ACT_CFUA_ERIC-HLR_R12-0_ACT_CLIPA_ERIC-HLR_R12-0_ACT_CLIRA_ERIC-HLR_R12-0_ACT_COLPA_ERIC-HLR_R12-0_ACT_COLRA_ERIC-HLR_R12-0_ACT_EMLPPA_ERIC-HLR_R12-0_ACT_HOLDA_ERIC-HLR_R12-0_ACT_ICIA_ERIC-HLR_R12-0_ACT_MPTYA_ERIC-HLR_R12-0_ACT_OBAA_ERIC-HLR_R12-0_ACT_OBOPREA_ERIC-HLR_R12-0_ACT_OBOPRIA_ERIC-HLR_R12-0_ACT_OBSSMA_ERIC-HLR_R12-0_ACT_OBZIA_ERIC-HLR_R12-0_ACT_OIN

Page 34: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

20 Oracle Corporation

A_ERIC-HLR_R12-0_ACT_OSB1A_ERIC-HLR_R12-0_ACT_OSB2A_ERIC-HLR_R12-0_ACT_OSB3A_ERIC-HLR_R12-0_ACT_OSB4A_ERIC-HLR_R12-0_ACT_PAIA_ERIC-HLR_R12-0_ACT_SOCFRCA_ERIC-HLR_R12-0_ACT_SOCFUA_ERIC-HLR_R12-0_ACT_SOCLIPA_ERIC-HLR_R12-0_ACT_SOCOLPA_ERIC-HLR_R12-0_ACT_TINA_ERIC-HLR_R12-0_ACT_TS11A_ERIC-HLR_R12-0_ACT_TS21A_ERIC-HLR_R12-0_ACT_TS22A_ERIC-HLR_R12-0_ACT_TS61A_ERIC-HLR_R12-0_ACT_TS62A_ERIC-HLR_R12-0_ACT_TSMOA_ERIC-HLR_R12-0_ADD_AMSISDNA_ERIC-HLR_R12-0_ADD_APNA_ERIC-HLR_R12-0_ADD_BAICA_ERIC-HLR_R12-0_ADD_BAOCA_ERIC-HLR_R12-0_ADD_BICROA_ERIC-HLR_R12-0_ADD_BOICA_ERIC-HLR_R12-0_ADD_BOIEXHA_ERIC-HLR_R12-0_ADD_CAMELA_ERIC-HLR_R12-0_ADD_CAMEL-RBA_ERIC-HLR_R12-0_ADD_CAWA_ERIC-HLR_R12-0_ADD_CFBA_ERIC-HLR_R12-0_ADD_CFNRCA_ERIC-HLR_R12-0_ADD_CFNRYA_ERIC-HLR_R12-0_ADD_CFSA_ERIC-HLR_R12-0_ADD_CFUA_ERIC-HLR_R12-0_ADD_CUGA_ERIC-HLR_R12-0_ADD_DCFA_ERIC-HLR_R12-0_ADD_FEATURESA_ERIC-HLR_R12-0_ADD_FEATURES-RBA_ERIC-HLR_R12-0_ADD_GMLC

Page 35: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 21

A_ERIC-HLR_R12-0_ADD_GPRSA_ERIC-HLR_R12-0_ADD_GPRS-RBA_ERIC-HLR_R12-0_ADD_LOC-SERVICESA_ERIC-HLR_R12-0_ADD_SPNA_ERIC-HLR_R12-0_ADD_SMS-SPAM-DATAA_ERIC-HLR_R12-0_VIRTUAL_ADD-GPRSA_ERIC-HLR_R12-0_VIRTUAL_ADD-FEATURESA_ERIC-HLR_R12-0_VIRTUAL_ADD-NAMA_ERIC-HLR_R12-0_CREATE_MULTIPLE-SUBSCRIPTIONA_ERIC-HLR_R12-0_CREATE_SUBSCRIPTIONA_ERIC-HLR_R12-0_VIRTUAL_CREATE-SUBSCRIPTIONA_ERIC-HLR_R12-0_DEACT_BAICA_ERIC-HLR_R12-0_DEACT_BAOCA_ERIC-HLR_R12-0_DEACT_BICROA_ERIC-HLR_R12-0_DEACT_BOICA_ERIC-HLR_R12-0_DEACT_BOIEXHA_ERIC-HLR_R12-0_DEACT_BS21A_ERIC-HLR_R12-0_DEACT_BS22A_ERIC-HLR_R12-0_DEACT_BS23A_ERIC-HLR_R12-0_DEACT_BS24A_ERIC-HLR_R12-0_DEACT_BS25A_ERIC-HLR_R12-0_DEACT_BS26A_ERIC-HLR_R12-0_DEACT_BS2GA_ERIC-HLR_R12-0_DEACT_BS31A_ERIC-HLR_R12-0_DEACT_BS32A_ERIC-HLR_R12-0_DEACT_BS33A_ERIC-HLR_R12-0_DEACT_BS34A_ERIC-HLR_R12-0_DEACT_BS3GA_ERIC-HLR_R12-0_DEACT_CAWA_ERIC-HLR_R12-0_DEACT_CFBA_ERIC-HLR_R12-0_DEACT_CFNRCA_ERIC-HLR_R12-0_DEACT_CFNRYA_ERIC-HLR_R12-0_DEACT_CFUA_ERIC-HLR_R12-0_DEACT_CLIPA_ERIC-HLR_R12-0_DEACT_CLIRA_ERIC-HLR_R12-0_DEACT_COLP

Page 36: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

22 Oracle Corporation

A_ERIC-HLR_R12-0_DEACT_COLRA_ERIC-HLR_R12-0_DEACT_EMLPPA_ERIC-HLR_R12-0_DEACT_HOLDA_ERIC-HLR_R12-0_DEACT_ICIA_ERIC-HLR_R12-0_DEACT_MPTYA_ERIC-HLR_R12-0_DEACT_OBAA_ERIC-HLR_R12-0_DEACT_OBOPREA_ERIC-HLR_R12-0_DEACT_OBOPRIA_ERIC-HLR_R12-0_DEACT_OBSSMA_ERIC-HLR_R12-0_DEACT_OBZIA_ERIC-HLR_R12-0_DEACT_OINA_ERIC-HLR_R12-0_DEACT_OSB1A_ERIC-HLR_R12-0_DEACT_OSB2A_ERIC-HLR_R12-0_DEACT_OSB3A_ERIC-HLR_R12-0_DEACT_OSB4A_ERIC-HLR_R12-0_DEACT_PAIA_ERIC-HLR_R12-0_DEACT_SOCFRCA_ERIC-HLR_R12-0_DEACT_SOCFUA_ERIC-HLR_R12-0_DEACT_SOCLIPA_ERIC-HLR_R12-0_DEACT_SOCOLPA_ERIC-HLR_R12-0_DEACT_TINA_ERIC-HLR_R12-0_DEACT_TS11A_ERIC-HLR_R12-0_DEACT_TS21A_ERIC-HLR_R12-0_DEACT_TS22A_ERIC-HLR_R12-0_DEACT_TS61A_ERIC-HLR_R12-0_DEACT_TS62A_ERIC-HLR_R12-0_DEACT_TSMOA_ERIC-HLR_R12-0_DELETE_SUBSCRIPTIONA_ERIC-HLR_R12-0_DELETE_MULTIPLE-SUBSCRIPTIONA_ERIC-HLR_R12-0_GET_CAMELA_ERIC-HLR_R12-0_GET_CAMEL-RBA_ERIC-HLR_R12-0_GET_PDPA_ERIC-HLR_R12-0_GET_PDPDATAA_ERIC-HLR_R12-0_GET_PDPDATA-RBA_ERIC-HLR_R12-0_GET_PDPIDA_ERIC-HLR_R12-0_GET_PDPID-RB

Page 37: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 23

A_ERIC-HLR_R12-0_GET_SERVICE-ADDRESSESA_ERIC-HLR_R12-0_GET_SUBSCRIBERA_ERIC-HLR_R12-0_GET_SUBSCRIBER-RBA_ERIC-HLR_R12-0_GET_SUBSCRIPTIONA_ERIC-HLR_R12-0_GET_SUBSCRIPTION-RBA_ERIC-HLR_R12-0_GET_SUBSCRIBER-ALLDATAA_ERIC-HLR_R12-0_GET_IMSI-DEL-DATAA_ERIC-HLR_R12-0_MODIFY_IMSIA_ERIC-HLR_R12-0_MODIFY_IMSI-CANCELA_ERIC-HLR_R12-0_MODIFY_IMSI-CHANGEOVERA_ERIC-HLR_R12-0_MODIFY_IMSI-DEL-DATAA_ERIC-HLR_R12-0_MODIFY_IMSI-DEL-DATA-RBA_ERIC-HLR_R12-0_MODIFY_LOC-SERVICESA_ERIC-HLR_R12-0_MODIFY_MULTIPLE-SUBSCRIPTIONA_ERIC-HLR_R12-0_MODIFY_SUBSCRIPTIONA_ERIC-HLR_R12-0_MODIFY_SUBSCRIPTION-RBA_ERIC-HLR_R12-0_MOD_ACCA_ERIC-HLR_R12-0_MOD_ACC-RBA_ERIC-HLR_R12-0_MOD_AOCA_ERIC-HLR_R12-0_MOD_AOC-RBA_ERIC-HLR_R12-0_MOD_BS2FA_ERIC-HLR_R12-0_MOD_BS2F-RBA_ERIC-HLR_R12-0_MOD_BS3FA_ERIC-HLR_R12-0_MOD_BS3F-RBA_ERIC-HLR_R12-0_MOD_CAMELA_ERIC-HLR_R12-0_MOD_CAMEL-EXTENDEDA_ERIC-HLR_R12-0_MOD_CAMEL-EXTENDED-RBA_ERIC-HLR_R12-0_MOD_CAMEL-RBA_ERIC-HLR_R12-0_MOD_CAPLA_ERIC-HLR_R12-0_MOD_CAPL-RBA_ERIC-HLR_R12-0_MOD_CATA_ERIC-HLR_R12-0_MOD_CAT-RBA_ERIC-HLR_R12-0_MOD_DBSGA_ERIC-HLR_R12-0_MOD_DBSG-RBA_ERIC-HLR_R12-0_MOD_DEMLPPA_ERIC-HLR_R12-0_MOD_DEMLPP-RB

Page 38: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

24 Oracle Corporation

A_ERIC-HLR_R12-0_MOD_FEATURESA_ERIC-HLR_R12-0_MOD_GPRSA_ERIC-HLR_R12-0_MOD_GPRS-RBA_ERIC-HLR_R12-0_MOD_HPNA_ERIC-HLR_R12-0_MOD_HPN-RBA_ERIC-HLR_R12-0_MOD_MEMLPPA_ERIC-HLR_R12-0_MOD_MEMLPP-RBA_ERIC-HLR_R12-0_MOD_NAMA_ERIC-HLR_R12-0_MOD_NAM-RBA_ERIC-HLR_R12-0_MOD_OBIA_ERIC-HLR_R12-0_MOD_OBI-RBA_ERIC-HLR_R12-0_MOD_OBOA_ERIC-HLR_R12-0_MOD_OBO-RBA_ERIC-HLR_R12-0_MOD_OBRA_ERIC-HLR_R12-0_MOD_OBR-RBA_ERIC-HLR_R12-0_MOD_OBRFA_ERIC-HLR_R12-0_MOD_OBRF-RBA_ERIC-HLR_R12-0_MOD_OBZOA_ERIC-HLR_R12-0_MOD_OBZO-RBA_ERIC-HLR_R12-0_MOD_OFAA_ERIC-HLR_R12-0_MOD_OFA-RBA_ERIC-HLR_R12-0_MOD_OICKA_ERIC-HLR_R12-0_MOD_OICK-RBA_ERIC-HLR_R12-0_MOD_PICIA_ERIC-HLR_R12-0_MOD_PICI-RBA_ERIC-HLR_R12-0_MOD_PWDA_ERIC-HLR_R12-0_MOD_PWD-RBA_ERIC-HLR_R12-0_MOD_REGSERA_ERIC-HLR_R12-0_MOD_REGSER-RBA_ERIC-HLR_R12-0_MOD_SCHARA_ERIC-HLR_R12-0_MOD_SCHAR-RBA_ERIC-HLR_R12-0_MOD_SOCBA_ERIC-HLR_R12-0_MOD_SOCB-RBA_ERIC-HLR_R12-0_MOD_SOCFBA_ERIC-HLR_R12-0_MOD_SOCFB-RBA_ERIC-HLR_R12-0_MOD_SOCFRY

Page 39: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 25

A_ERIC-HLR_R12-0_MOD_SOCFRY-RBA_ERIC-HLR_R12-0_MOD_SOCLIRA_ERIC-HLR_R12-0_MOD_SOCLIR-RBA_ERIC-HLR_R12-0_MOD_SODCFA_ERIC-HLR_R12-0_MOD_SODCF-RBA_ERIC-HLR_R12-0_MOD_SOSDCFA_ERIC-HLR_R12-0_MOD_SOSDCF-RBA_ERIC-HLR_R12-0_MOD_STYPEA_ERIC-HLR_R12-0_MOD_STYPE-RBA_ERIC-HLR_R12-0_MOD_TICKA_ERIC-HLR_R12-0_MOD_TICK-RBA_ERIC-HLR_R12-0_REM_AMSISDNA_ERIC-HLR_R12-0_REM_APNA_ERIC-HLR_R12-0_REM_BAICA_ERIC-HLR_R12-0_REM_BAOCA_ERIC-HLR_R12-0_REM_BICROA_ERIC-HLR_R12-0_REM_BOICA_ERIC-HLR_R12-0_REM_BOIEXHA_ERIC-HLR_R12-0_REM_CAMELA_ERIC-HLR_R12-0_REM_CAWA_ERIC-HLR_R12-0_REM_CFBA_ERIC-HLR_R12-0_REM_CFNRCA_ERIC-HLR_R12-0_REM_CFNRYA_ERIC-HLR_R12-0_REM_CFSA_ERIC-HLR_R12-0_REM_CFUA_ERIC-HLR_R12-0_REM_CUGA_ERIC-HLR_R12-0_REM_DCFA_ERIC-HLR_R12-0_REM_FEATURESA_ERIC-HLR_R12-0_REM_GMLCA_ERIC-HLR_R12-0_REM_GPRSA_ERIC-HLR_R12-0_REM_LOC-SERVICESA_ERIC-HLR_R12-0_REM_SPNA_ERIC-HLR_R12-0_REM_SMS-SPAM-DATAA_ERIC-HLR_R12-0_RESET_LOCATION

Page 40: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

26 Oracle Corporation

A_ERIC-HLR_R12-0_ACT_BAICActivates the barring of all incoming calls feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.actBAIC.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = BAIC

<command_value> = 1

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ACT_BAIC_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ACT_BAIC_RETURN_INFO = <NE error code>:<NE error description>

Table 6: A_ERIC-HLR_R12-0_ACT_BAIC

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 41: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 27

A_ERIC-HLR_R12-0_ACT_BAOCActivates the barring of all outgoing calls feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.actBAOC.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = BAOC

<command_value> = 1

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ACT_BAOC_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ACT_BAOC_RETURN_INFO = <NE error code>:<NE error description>

Table 7: A_ERIC-HLR_R12-0_ACT_BAOC

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 42: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

28 Oracle Corporation

A_ERIC-HLR_R12-0_ACT_BICROActivates the barring of all incoming calls when roaming outside the home PLMN country feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.actBICRO.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = BICRO

<command_value> = 1

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ACT_BICRO_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ACT_BICRO_RETURN_INFO = <NE error code>:<NE error description>

Table 8: A_ERIC-HLR_R12-0_ACT_BICRO

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 43: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 29

A_ERIC-HLR_R12-0_ACT_BOICActivates the barring of all outgoing international calls feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.actBOIC.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = BOIC

<command_value> = 1

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ACT_BOIC_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ACT_BOIC_RETURN_INFO = <NE error code>:<NE error description>

Table 9: A_ERIC-HLR_R12-0_ACT_BOIC

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 44: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

30 Oracle Corporation

A_ERIC-HLR_R12-0_ACT_BOIEXHActivates the barring of all outgoing international calls except those directed to the home PLMN country feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.actBOIEXH.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = BOIEXH

<command_value> = 1

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ACT_BOIEXH_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ACT_BOIEXH_RETURN_INFO = <NE error code>:<NE error description>

Table 10: A_ERIC-HLR_R12-0_ACT_BOIEXH

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 45: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 31

A_ERIC-HLR_R12-0_ACT_BS21Activates the datacircuit asynchronous 300 baud feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.actBS21.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = BS21

<command_value> = 1

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ACT_BS21_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ACT_BS21_RETURN_INFO = <NE error code>:<NE error description>

Table 11: A_ERIC-HLR_R12-0_ACT_BS21

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 46: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

32 Oracle Corporation

A_ERIC-HLR_R12-0_ACT_BS22Activates the datacircuit asynchronous 1200 baud feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.actBS22.

MMl commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = BS22

<command_value> = 1

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ACT_BS22_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ACT_BS22_RETURN_INFO = <NE error code>:<NE error description>

Table 12: A_ERIC-HLR_R12-0_ACT_BS22

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 47: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 33

A_ERIC-HLR_R12-0_ACT_BS23Activates the datacircuit asynchronous 1200-75 baud feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.actBS23.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = BS23

<command_value> = 1

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ACT_BS23_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ACT_BS23_RETURN_INFO = <NE error code>:<NE error description>

Table 13: A_ERIC-HLR_R12-0_ACT_BS23

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 48: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

34 Oracle Corporation

A_ERIC-HLR_R12-0_ACT_BS24Activates the datacircuit asynchronous 2400 baud feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.actBS24.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = BS24

<command_value> = 1

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ACT_BS24_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ACT_BS24_RETURN_INFO = <NE error code>:<NE error description>

Table 14: A_ERIC-HLR_R12-0_ACT_BS24

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 49: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 35

A_ERIC-HLR_R12-0_ACT_BS25Activates the datacircuit asynchronous 4800 baud feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.actBS25.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = BS25

<command_value> = 1

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ACT_BS25_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ACT_BS25_RETURN_INFO = <NE error code>:<NE error description>

Table 15: A_ERIC-HLR_R12-0_ACT_BS25

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 50: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

36 Oracle Corporation

A_ERIC-HLR_R12-0_ACT_BS26Activates the datacircuit asynchronous 9600 baud feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.actBS26.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = BS26

<command_value> = 1

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ACT_BS26_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ACT_BS26_RETURN_INFO = <NE error code>:<NE error description>

Table 16: A_ERIC-HLR_R12-0_ACT_BS26

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 51: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 37

A_ERIC-HLR_R12-0_ACT_BS2GActivates the general asynchronous bearer service feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.actBS2G.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = BS2G

<command_value> = 1

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ACT_BS2G_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ACT_BS2G_RETURN_INFO = <NE error code>:<NE error description>

Table 17: A_ERIC-HLR_R12-0_ACT_BS2G

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 52: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

38 Oracle Corporation

A_ERIC-HLR_R12-0_ACT_BS31Activates the datacircuit synchronous 1200 baud feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.actBS31.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = BS31

<command_value> = 1

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ACT_BS31_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ACT_BS31_RETURN_INFO = <NE error code>:<NE error description>

Table 18: A_ERIC-HLR_R12-0_ACT_BS31

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 53: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 39

A_ERIC-HLR_R12-0_ACT_BS32Activates the datacircuit synchronous 2400 baud feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.actBS32.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = BS32

<command_value> = 1

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ACT_BS32_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ACT_BS32_RETURN_INFO = <NE error code>:<NE error description>

Table 19: A_ERIC-HLR_R12-0_ACT_BS32

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 54: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

40 Oracle Corporation

A_ERIC-HLR_R12-0_ACT_BS33Activates the datacircuit synchronous 4800 baud feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.actBS33.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = BS33

<command_value> = 1

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ACT_BS33_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ACT_BS33_RETURN_INFO = <NE error code>:<NE error description>

Table 20: A_ERIC-HLR_R12-0_ACT_BS33

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 55: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 41

A_ERIC-HLR_R12-0_ACT_BS34Activates the datacircuit synchronous 9600 baud feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.actBS34.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = BS34

<command_value> = 1

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ACT_BS34_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ACT_BS34_RETURN_INFO = <NE error code>:<NE error description>

Table 21: A_ERIC-HLR_R12-0_ACT_BS34

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 56: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

42 Oracle Corporation

A_ERIC-HLR_R12-0_ACT_BS3GActivates the general synchronous bearer service feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.actBS3G.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = BS3G

<command_value> = 1

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ACT_BS3G_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ACT_BS3G_RETURN_INFO = <NE error code>:<NE error description>

Table 22: A_ERIC-HLR_R12-0_ACT_BS3G

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 57: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 43

A_ERIC-HLR_R12-0_ACT_CAWActivates the call waiting feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.actCAW.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = CAW

<command_value> = 1

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ACT_CAW_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ACT_CAW_RETURN_INFO = <NE error code>:<NE error description>

Table 23: A_ERIC-HLR_R12-0_ACT_CAW

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 58: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

44 Oracle Corporation

A_ERIC-HLR_R12-0_ACT_CFBActivates the call forwarding on mobile subscriber busy. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.actCFB.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = CFB

<command_value> = 1

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ACT_CFB_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ACT_CFB_RETURN_INFO = <NE error code>:<NE error description>

Table 24: A_ERIC-HLR_R12-0_ACT_CFB

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 59: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 45

A_ERIC-HLR_R12-0_ACT_CFNRCActivates the call forwarding on mobile subscriber not reachable feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.actCFNRC.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = CFNRC

<command_value> = 1

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ACT_CFNRC_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ACT_CFNRC_RETURN_INFO = <NE error code>:<NE error description>

Table 25: A_ERIC-HLR_R12-0_ACT_CFNRC

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 60: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

46 Oracle Corporation

A_ERIC-HLR_R12-0_ACT_CFNRYActivates the call forwarding on no reply feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.actCFNRY.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = CFNRY

<command_value> = 1

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ACT_CFNRY_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ACT_CFNRY_RETURN_INFO = <NE error code>:<NE error description>

Table 26: A_ERIC-HLR_R12-0_ACT_CFNRY

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 61: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 47

A_ERIC-HLR_R12-0_ACT_CFUActivates the call forwarding unconditional feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.actCFU.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = CFU

<command_value> = 1

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ACT_CFU_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ACT_CFU_RETURN_INFO = <NE error code>:<NE error description>

Table 27: A_ERIC-HLR_R12-0_ACT_CFU

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 62: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

48 Oracle Corporation

A_ERIC-HLR_R12-0_ACT_CLIPActivates the calling line identification presentation feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.actCLIP.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = CLIP

<command_value> = 1

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ACT_CLIP_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ACT_CLIP_RETURN_INFO = <NE error code>:<NE error description>

Table 28: A_ERIC-HLR_R12-0_ACT_CLIP

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 63: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 49

A_ERIC-HLR_R12-0_ACT_CLIRActivates the calling line identification restriction feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.actCLIR.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = CLIR

<command_value> = 1

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ACT_CLIR_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ACT_CLIR_RETURN_INFO = <NE error code>:<NE error description>

Table 29: A_ERIC-HLR_R12-0_ACT_CLIR

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 64: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

50 Oracle Corporation

A_ERIC-HLR_R12-0_ACT_COLPActivates the connected line identification presentation feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.actCOLP.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = COLP

<command_value> = 1

Output parameters

<RETURN_DATA_PREFIX>Return as CSDL Parameter :

A_ERIC-HLR_R12-0_ACT_COLP_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ACT_COLP_RETURN_INFO = <NE error code>:<NE error description>

Table 30: A_ERIC-HLR_R12-0_ACT_COLP

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 65: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 51

A_ERIC-HLR_R12-0_ACT_COLRActivates the connected line identification restriction feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.actCOLR.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = COLR

<command_value> = 1

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ACT_COLR_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ACT_COLR_RETURN_INFO = <NE error code>:<NE error description>

Table 31: A_ERIC-HLR_R12-0_ACT_COLR

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 66: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

52 Oracle Corporation

A_ERIC-HLR_R12-0_ACT_EMLPPActivates the enhanced multi-level precedence and pre-emption feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.actEMLPP.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = EMLPP

<command_value> = 1

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ACT_EMLPP_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ACT_EMLPP_RETURN_INFO = <NE error code>:<NE error description>

Table 32: A_ERIC-HLR_R12-0_ACT_EMLPP

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 67: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 53

A_ERIC-HLR_R12-0_ACT_HOLDActivates the call hold feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.actHOLD.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = HOLD

<command_value> = 1

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ACT_HOLD_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ACT_HOLD_RETURN_INFO = <NE error code>:<NE error description>

Table 33: A_ERIC-HLR_R12-0_ACT_HOLD

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 68: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

54 Oracle Corporation

A_ERIC-HLR_R12-0_ACT_ICIActivates the immediate call itemization feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.actICI.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = ICI

<command_value> = 1

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ACT_ICI_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ACT_ICI_RETURN_INFO = <NE error code>:<NE error description>

Table 34: A_ERIC-HLR_R12-0_ACT_ICI

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 69: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 55

A_ERIC-HLR_R12-0_ACT_MPTYActivates the multi party service feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.actMPTY.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = MPTY

<command_value> = 1

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ACT_MPTY_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ACT_MPTY_RETURN_INFO = <NE error code>:<NE error description>

Table 35: A_ERIC-HLR_R12-0_ACT_MPTY

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 70: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

56 Oracle Corporation

A_ERIC-HLR_R12-0_ACT_OBAActivates the operator determined barring of all incoming and outgoing calls. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.actOBA.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = OBA

<command_value> = 1

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ACT_OBA_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ACT_OBA_RETURN_INFO = <NE error code>:<NE error description>

Table 36: A_ERIC-HLR_R12-0_ACT_OBA

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 71: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 57

A_ERIC-HLR_R12-0_ACT_OBOPREActivates the operator determined barring of outgoing premium rate calls (Entertainment) feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.actOBOPRE.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = OBOPRE

<command_value> = 1

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ACT_OBOPRE_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ACT_OBOPRE_RETURN_INFO = <NE error code>:<NE error description>

Table 37: A_ERIC-HLR_R12-0_ACT_OBOPRE

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 72: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

58 Oracle Corporation

A_ERIC-HLR_R12-0_ACT_OBOPRIActivates the operator determined barring of outgoing premium rate calls (Information) feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.actOBOPRI.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = OBOPRI

<command_value> = 1

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ACT_OBOPRI_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ACT_OBOPRI_RETURN_INFO = <NE error code>:<NE error description>

Table 38: A_ERIC-HLR_R12-0_ACT_OBOPRI

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 73: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 59

A_ERIC-HLR_R12-0_ACT_OBSSMActivates the operator determined barring of supplementary service management feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.actOBSSM.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = OBSSM

<command_value> = 1

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ACT_OBSSM_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ACT_OBSSM_RETURN_INFO = <NE error code>:<NE error description>

Table 39: A_ERIC-HLR_R12-0_ACT_OBSSM

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 74: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

60 Oracle Corporation

A_ERIC-HLR_R12-0_ACT_OBZIActivates the operator determined barring of incoming inter-zonal calls feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.actOBZI.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = OBZI

<command_value> = 1

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ACT_OBZI_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ACT_OBZI_RETURN_INFO = <NE error code>:<NE error description>

Table 40: A_ERIC-HLR_R12-0_ACT_OBZI

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 75: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 61

A_ERIC-HLR_R12-0_ACT_OINActivates the originating intelligent network feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.actOIN.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = OIN

<command_value> = 1

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ACT_OIN_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ACT_OIN_RETURN_INFO = <NE error code>:<NE error description>

Table 41: A_ERIC-HLR_R12-0_ACT_OIN

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 76: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

62 Oracle Corporation

A_ERIC-HLR_R12-0_ACT_OSB1Activates the operator determined barring of specific barring in HPLMN (Type1) feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.actOSB1.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = OSB1

<command_value> = 1

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ACT_OSB1_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ACT_OSB1_RETURN_INFO = <NE error code>:<NE error description>

Table 42: A_ERIC-HLR_R12-0_ACT_OSB1

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 77: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 63

A_ERIC-HLR_R12-0_ACT_OSB2Activates the operator determined barring of specific barring in HPLMN (Type 2) feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.actOSB2.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = OSB2

<command_value> = 1

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ACT_OSB2_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ACT_OSB2_RETURN_INFO = <NE error code>:<NE error description>

Table 43: A_ERIC-HLR_R12-0_ACT_OSB2

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 78: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

64 Oracle Corporation

A_ERIC-HLR_R12-0_ACT_OSB3Activates the operator determined barring of specific barring in HPLMN (Type 3) feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.actOSB3.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = OSB3

<command_value> = 1

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ACT_OSB3_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ACT_OSB3_RETURN_INFO = <NE error code>:<NE error description>

Table 44: A_ERIC-HLR_R12-0_ACT_OSB3

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 79: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 65

A_ERIC-HLR_R12-0_ACT_OSB4Activates the operator determined barring of specific barring in HPLMN (Type 4) feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.actOSB4.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = OSB4

<command_value> = 1

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ACT_OSB4_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ACT_OSB4_RETURN_INFO = <NE error code>:<NE error description>

Table 45: A_ERIC-HLR_R12-0_ACT_OSB4

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 80: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

66 Oracle Corporation

A_ERIC-HLR_R12-0_ACT_PAIActivates the positioning allowed indicator feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.actPAI.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = PAI

<command_value> = 1

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ACT_PAI_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ACT_PAI_RETURN_INFO = <NE error code>:<NE error description>

Table 46: A_ERIC-HLR_R12-0_ACT_PAI

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 81: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 67

A_ERIC-HLR_R12-0_ACT_SOCFRCActivates the subscription option call forwarding on mobile subscriber not reachable feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.actSOCFRC.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = SOCFRC

<command_value> = 1

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ACT_SOCFRC_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ACT_SOCFRC_RETURN_INFO = <NE error code>:<NE error description>

Table 47: A_ERIC-HLR_R12-0_ACT_SOCFRC

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 82: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

68 Oracle Corporation

A_ERIC-HLR_R12-0_ACT_SOCFUActivates the subscription option call forwarding unconditional feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.actSOCFU.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = SOCFU

<command_value> = 1

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ACT_SOCFU_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ACT_SOCFU_RETURN_INFO = <NE error code>:<NE error description>

Table 48: A_ERIC-HLR_R12-0_ACT_SOCFU

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 83: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 69

A_ERIC-HLR_R12-0_ACT_SOCLIPActivates the subscription option calling line identification presentation feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.actSOCLIP.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = SOCLIP

<command_value> = 1

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ACT_SOCLIP_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ACT_SOCLIP_RETURN_INFO = <NE error code>:<NE error description>

Table 49: A_ERIC-HLR_R12-0_ACT_SOCLIP

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 84: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

70 Oracle Corporation

A_ERIC-HLR_R12-0_ACT_SOCOLPActivates the subscription option connected line identification presentation feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.actSOCOLP.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = SOCOLP

<command_value> = 1

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ACT_SOCOLP_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ACT_SOCOLP_RETURN_INFO = <NE error code>:<NE error description>

Table 50: A_ERIC-HLR_R12-0_ACT_SOCOLP

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 85: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 71

A_ERIC-HLR_R12-0_ACT_TINActivates the terminating intelligent network feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.actTIN.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = TIN

<command_value> = 1

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ACT_TIN_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ACT_TIN_RETURN_INFO = <NE error code>:<NE error description>

Table 51: A_ERIC-HLR_R12-0_ACT_TIN

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 86: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

72 Oracle Corporation

A_ERIC-HLR_R12-0_ACT_TS11Activates the telephony feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.actTS11.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = TS11

<command_value> = 1

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ACT_TS11_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ACT_TS11_RETURN_INFO = <NE error code>:<NE error description>

Table 52: A_ERIC-HLR_R12-0_ACT_TS11

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 87: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 73

A_ERIC-HLR_R12-0_ACT_TS21Activates the short message MT/PP feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.actTS21.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = TS21

<command_value> = 1

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ACT_TS21_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ACT_TS21_RETURN_INFO = <NE error code>:<NE error description>

Table 53: A_ERIC-HLR_R12-0_ACT_TS21

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 88: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

74 Oracle Corporation

A_ERIC-HLR_R12-0_ACT_TS22Activates the short message MO/PP feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.actTS22.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = TS22

<command_value> = 1

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ACT_TS22_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ACT_TS22_RETURN_INFO = <NE error code>:<NE error description>

Table 54: A_ERIC-HLR_R12-0_ACT_TS22

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 89: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 75

A_ERIC-HLR_R12-0_ACT_TS61Activates the alternate speech/fax group 3 transparent. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.actTS61.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = TS61

<command_value> = 1

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ACT_TS61_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ACT_TS61_RETURN_INFO = <NE error code>:<NE error description>

Table 55: A_ERIC-HLR_R12-0_ACT_TS61

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 90: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

76 Oracle Corporation

A_ERIC-HLR_R12-0_ACT_TS62Activates the automatic facsimile group 3 feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.actTS62.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = TS62

<command_value> = 1

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ACT_TS62_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ACT_TS62_RETURN_INFO = <NE error code>:<NE error description>

Table 56: A_ERIC-HLR_R12-0_ACT_TS62

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 91: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 77

A_ERIC-HLR_R12-0_ACT_TSMOActivates the transfer of short message option feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.actTSMO.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = TSMO

<command_value> = 1

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ACT_TSMO_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ACT_TSMO_RETURN_INFO = <NE error code>:<NE error description>

Table 57: A_ERIC-HLR_R12-0_ACT_TSMO

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 92: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

78 Oracle Corporation

A_ERIC-HLR_R12-0_ADD_AMSISDNAdds the additional MSISDN feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.addAMSISDN.

MML commandsHGAMI:MSISDN=<msisdn>,AMSISDN=<amsisdn>,BC=<bc>;

where <msisdn> = MSISDN

<amsisdn> = Additional MSISDN

<bc> = Bearer Capablity Number

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ADD_AMSISDN_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ADD_AMSISDN_RETURN_INFO = <NE error code>:<NE error description>

Table 58: A_ERIC-HLR_R12-0_ADD_AMSISDN

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

AMSISDN Additional MSISDN. S R

BC Bearer capability number.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 93: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 79

A_ERIC-HLR_R12-0_ADD_APNAdds the access point name feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.addAPN.

MML commandsHGAPI:APN1=<apn1>[,APN2=<apn2>][,APNID=<apnid>];

where <apn1> = first part of the access point name

<apn2> = second part of the access point name

<apnid> = access point name identifier

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ADD_APN_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ADD_APN_RETURN_INFO = <NE error code>:<NE error description>

Table 59: A_ERIC-HLR_R12-0_ADD_APN

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

APN1 Access point name first part.

Text string 1 - 41 characters

S R

APN2 Access point name second part.

Text string 1 - 41 characters

S O

APNID Access point name identifier.

0 - 16383 S O

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 94: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

80 Oracle Corporation

A_ERIC-HLR_R12-0_ADD_BAICAdds the barring of all incoming calls feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.addBAIC.

MML commandsHGSSI:MSISDN=<msisdn>,SS=BAIC[,BSG=<bsg>];

where

<msisdn> = MSISDN

<bsg> = Basic Service Group

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ADD_BAIC_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ADD_BAIC_RETURN_INFO = <NE error code>:<NE error description>

Table 60: A_ERIC-HLR_R12-0_ADD_BAIC

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

BSG Basic service group. S O

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 95: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 81

A_ERIC-HLR_R12-0_ADD_BAOCAdds the barring of all outgoing calls feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.addBAOC.

MML commandsHGSSI:MSISDN=<msisdn>,SS=BAOC[,BSG=<bsg>];

where

<msisdn> = MSISDN

<bsg> = Basic Service Group

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ADD_BAOC_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ADD_BAOC_RETURN_INFO = <NE error code>:<NE error description>

Table 61: A_ERIC-HLR_R12-0_ADD_BAOC

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

BSG Basic service group. S O

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 96: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

82 Oracle Corporation

A_ERIC-HLR_R12-0_ADD_BICROAdds the barring of all incoming calls when roaming outside the home PLMN country feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.addBICRO.

MML commandsHGSSI:MSISDN=<msisdn>,SS=BICRO[,BSG=<bsg>];

where

<msisdn> = MSISDN

<bsg> = Basic Service Group

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ADD_BICRO_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ADD_BICRO_RETURN_INFO = <NE error code>:<NE error description>

Table 62: A_ERIC-HLR_R12-0_ADD_BICRO

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

BSG Basic service group. S O

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 97: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 83

A_ERIC-HLR_R12-0_ADD_BOICAdds the barring of all outgoing international calls feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.addBOIC.

MML commandsHGSSI:MSISDN=<msisdn>,SS=BOIC[,BSG=<bsg>];

where

<msisdn> = MSISDN

<bsg> = Basic Service Group

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ADD_BOIC_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ADD_BOIC_RETURN_INFO = <NE error code>:<NE error description>

Table 63: A_ERIC-HLR_R12-0_ADD_BOIC

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

BSG Basic service group. S O

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 98: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

84 Oracle Corporation

A_ERIC-HLR_R12-0_ADD_BOIEXHAdds the barring of all outgoing international calls feature Except those directed to the home PLMN country. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.addBOIEXH.

MML commandsHGSSI:MSISDN=<msisdn>,SS=BOIEXH[,BSG=<bsg>];

where

<msisdn> = MSISDN

<bsg> = Basic Service Group

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ADD_BOIEXH_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ADD_BOIEXH_RETURN_INFO = <NE error code>:<NE error description>

Table 64: A_ERIC-HLR_R12-0_ADD_BOIEXH

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

BSG Basic service group. S O

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 99: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 85

A_ERIC-HLR_R12-0_ADD_CAMELAdds the camel services feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.addCAMEL.

Table 65: A_ERIC-HLR_R12-0_ADD_CAMEL

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S O

CSP CAMEL subscription profile.

1 - 255 S O

MMTDP Mobility management CAMEL subscription data trigger detection point.

Valid values are from 0 to 4.(0-Location update in the same Visitor Location Register (VLR) service area;1-Location update to another VLR service area;2-International Mobile Subscriber Identity (IMSI) attach;3-Mobile Station (MS) initiated IMSI detach (explicit detach);4-Network initiated IMSI detach (implicit detach))

S O

DSTDP Dialled service CAMEL subscription data trigger detection point.

1 - 10 S O

Page 100: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

86 Oracle Corporation

DIALNUM Dialled number. 1.Format is na-dial where na is nature of address (0 to 4 Ex:na-Nature of address indicator;0-Unknown;1-Not used;2-Not used;3-National number;4-International number). 2.dial Dialled number series Text string 1 - 15 characters. 3.Only digits 0-9, *, #, a, b and c are allowed as characters.

S O

TSMSTDP Terminating SMS CAMEL subscription data trigger detection point.

Valid value is 2.(2-SMS Delivery Request).

S O

OSMSTDP Originating SMS trigger detection point.

Valid value is 1.(1-SMS collected info).

S O

GPRSTDP GPRS CAMEL trigger detection point.

Valid values are 1,2,11,12,14. (1-Attach,2-Change of position GPRS session,11-Packet Data Protocol (PDP) context establishment,12-PDP context establishment acknowledgment,14-Change of position context)

S O

OCTDP Originating CAMEL subscription data trigger detection point.

Valid values are 2,4.(2-Collected info,4-Route select failure).

S O

Table 65: A_ERIC-HLR_R12-0_ADD_CAMEL

Parameter Name Description RangeDefault Value

Type Class

Page 101: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 87

TCTDP Terminating CAMEL subscription data trigger detection point.

Valid values are 12,13,14.(12-Terminating attempt authorized,13-Terminator busy,14-Terminator no answer).

S O

VTTDP Visited mobile switching centre terminating trigger detection point.

Valid values are 12,13,14.(12-Terminating attempt authorized,13-Terminator busy,14-Terminator no answer).

S O

GSA GSM service control function address. Defined as international E.164 number.

Range is digit string 3-15 digits.

S R

SK Service key. 0 - 2147483647 S R

DEH Default error handling. Valid values are 0 - Call released in case of errror in GSM service control function to GSM or GPRS, 1 - Call continued in case of errror in GSM service control function to GSM or GPRS

S O

I Inhibitor indicator. Valid values are Y - Terminating trigger detection point will not be sent to the Gateway Mobile Services Switch Center and N -Terminating trigger detection point will always be sent to the Gateway Mobile Services Switch Center.

S O

Table 65: A_ERIC-HLR_R12-0_ADD_CAMEL

Parameter Name Description RangeDefault Value

Type Class

Page 102: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

88 Oracle Corporation

MML commandsIf (Optional parameter MSISDN provided) THEN

{

HGCMI:MSISDN=<msisdn>,MMTDP=<mmtdp>,SK=<sk>,GSA=<gsa>[,CCH=<cch>];

or

HGCMI:MSISDN=<msisdn>,DSTDP=<dstdp>,DIALNUM=<dialnum>,SK=<sk>,GSA=<gsa>,DEH=<deh>[,CCH=<cch>];

or

HGCMI:MSISDN=<msisdn>,TSMSTDP=<tsmstdp>,SK=<sk>,GSA=<gsa>,DEH=<deh>[,CCH=<cch>];

or

HGCMI:MSISDN=<msisdn>,OSMSTDP=<osmstdp>,SK=<sk>,GSA=<gsa>,DEH=<deh>[,CCH=<cch>];

or

HGCMI:MSISDN=<msisdn>,GPRSTDP=<gprstdp>,SK=<sk>,GSA=<gsa>,DEH=<deh>[,CCH=<cch>];

or

HGCMI:MSISDN=<msisdn>,OCTDP=<octdp>,SK=<sk>,GSA=<gsa>,DEH=<deh>[,CCH=<cch>];

or

HGCMI:MSISDN=<msisdn>,TCTDP=<tctdp>[,I=<i>],SK=<sk>,GSA=<gsa>,DEH=<deh>[,CCH=<cch>];

or

HGCMI:MSISDN=<msisdn>,VTTDP=<vttdp>,SK=<sk>,GSA=<gsa>,DEH=<deh>[,CCH=<cch>];

}

else If(Optional Parameter CSP Provided) THEN

CCH CAMEL capability handling.

Range is 1,2 , 3 or 4.(1-CAMEL phase 1;2-CAMEL phase 2;3-CAMEL phase 3;4-CAMEL phase 4;)

S O

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 65: A_ERIC-HLR_R12-0_ADD_CAMEL

Parameter Name Description RangeDefault Value

Type Class

Page 103: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 89

{

HGCMI:CSP=<csp>,MMTDP=<mmtdp>,SK=<sk>,GSA=<gsa>[,CCH=<cch>];

or

HGCMI:CSP=<csp>,DSTDP=<dstdp>,DIALNUM=<dialnum>,SK=<sk>,GSA=<gsa>,DEH=<deh>[,CCH=<cch>];

or

HGCMI:CSP=<csp>,TSMSTDP=<tsmstdp>,SK=<sk>,GSA=<gsa>,DEH=<deh>[,CCH=<cch>];

or

HGCMI:CSP=<csp>,OSMSTDP=<osmstdp>,SK=<sk>,GSA=<gsa>,DEH=<deh>[,CCH=<cch>];

or

HGCMI:CSP=<csp>,GPRSTDP=<gprstdp>,SK=<sk>,GSA=<gsa>,DEH=<deh>[,CCH=<cch>];

or

HGCMI:CSP=<csp>,OCTDP=<octdp>,SK=<sk>,GSA=<gsa>,DEH=<deh>[,CCH=<cch>];

or

HGCMI:CSP=<csp>,TCTDP=<tctdp>[,I=<i>],SK=<sk>,GSA=<gsa>,DEH=<deh>[,CCH=<cch>];

or

HGCMI:CSP=<csp>,VTTDP=<vttdp>,SK=<sk>,GSA=<gsa>,DEH=<deh>[,CCH=<cch>];

}

Where

<msisdn> = MSISDN.

<csp> = CAMEL subscription profile.

<mmtdp> = Mobility Management CAMEL Subscription Data Trigger Detection Point.

<dstdp> = Dialled service CAMEL Subscription Data Trigger Detection Point.

<dialnum> = Dialled number.

<tsmstdp> = Terminating SMS CAMEL Subscription Data Trigger Detection Point.

<osmstdp> = Originating SMS Trigger Detection Point.

<gprstdp> = GPRS CAMEL Trigger Detection Point.

<octdp> = Originating CAMEL Subscription Data Trigger Detection Point.

<tctdp> = Terminating CAMEL Subscription Data Trigger Detection Point.

<vttdp> = Visited Mobile Switching Centre terminating Trigger Detection Point.

<sk> = Service Key.

<gsa> = GSM service control function address.

<deh> = Default Error Handling.

<cch> = CAMEL Capability Handling.

Page 104: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

90 Oracle Corporation

<i> = Inhibitor Indicator.

Note:1 User should provide either MSISDN or CSP parameter even these parameters are optional.

Note:2 User should provide SK,GSA and DEH as mandatory parameters if MMTDP parameter is not provided.

Note:3 User should provide DIALNUM as mandatory parameters when MMTDP parameter is not provided and DSTDP optional parameter is provided.

Note:4 Addition of DSTDP, TSMSTDP and VTTDP is not currently supported by the model switch at Telstra.

These features could be required in a further enhancement.

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ADD_CAMEL_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ADD_CAMEL_RETURN_INFO = <NE error code>:<NE error description>

A_ERIC-HLR_R12-0_ADD_CAMEL-RBRollback functionality for the Add Camel Services. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLROptProvisioning.addCAMELRB.

Table 66: A_ERIC-HLR_R12-0_ADD_CAMEL-RB

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote Network Element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S O

CSP CAMEL subscription profile.

Valid values are from 1 to 255.

S O

Page 105: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 91

MML commandsIf (Optional parameter MSISDN provided) THEN

{

HGCMI:MSISDN=<msisdn>,MMTDP=<mmtdp>,SK=<sk>,GSA=<gsa>[,CCH=<cch>];

or

HGCMI:MSISDN=<msisdn>,DSTDP=<dstdp>,DIALNUM=<dialnum>,SK=<sk>,GSA=<gsa>,DEH=<deh>[,CCH=<cch>];

or

HGCMI:MSISDN=<msisdn>,TSMSTDP=<tsmstdp>,SK=<sk>,GSA=<gsa>,DEH=<deh>[,CCH=<cch>];

or

HGCMI:MSISDN=<msisdn>,OSMSTDP=<osmstdp>,SK=<sk>,GSA=<gsa>,DEH=<deh>[,CCH=<cch>];

or

HGCMI:MSISDN=<msisdn>,GPRSTDP=<gprstdp>,SK=<sk>,GSA=<gsa>,DEH=<deh>[,CCH=<cch>];

or

HGCMI:MSISDN=<msisdn>,OCTDP=<octdp>,SK=<sk>,GSA=<gsa>,DEH=<deh>[,CCH=<cch>];

TDPDATA Multiple CAMEL features to be added using MML optimization. Consists of: TDPDATA[i].TDPTYPE,TDPDATA[i].TDP,TDPDATA[i].SK,TDPDATA[i].GSA,TDPDATA[i].DEH,TDPDATA[i].CCH,TDPDATA[i].I,TDPDATA[i].DIALNUM where i is any number.

C R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 66: A_ERIC-HLR_R12-0_ADD_CAMEL-RB

Parameter Name Description RangeDefault Value

Type Class

Page 106: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

92 Oracle Corporation

or

HGCMI:MSISDN=<msisdn>,TCTDP=<tctdp>[,I=<i>],SK=<sk>,GSA=<gsa>,DEH=<deh>[,CCH=<cch>];

or

HGCMI:MSISDN=<msisdn>,VTTDP=<vttdp>,SK=<sk>,GSA=<gsa>,DEH=<deh>[,CCH=<cch>];

}

else If(Optional Parameter CSP Provided) THEN

{

HGCMI:CSP=<csp>,MMTDP=<mmtdp>,SK=<sk>,GSA=<gsa>[,CCH=<cch>];

or

HGCMI:CSP=<csp>,DSTDP=<dstdp>,DIALNUM=<dialnum>,SK=<sk>,GSA=<gsa>,DEH=<deh>[,CCH=<cch>];

or

HGCMI:CSP=<csp>,TSMSTDP=<tsmstdp>,SK=<sk>,GSA=<gsa>,DEH=<deh>[,CCH=<cch>];

or

HGCMI:CSP=<csp>,OSMSTDP=<osmstdp>,SK=<sk>,GSA=<gsa>,DEH=<deh>[,CCH=<cch>];

or

HGCMI:CSP=<csp>,GPRSTDP=<gprstdp>,SK=<sk>,GSA=<gsa>,DEH=<deh>[,CCH=<cch>];

or

HGCMI:CSP=<csp>,OCTDP=<octdp>,SK=<sk>,GSA=<gsa>,DEH=<deh>[,CCH=<cch>];

or

HGCMI:CSP=<csp>,TCTDP=<tctdp>[,I=<i>],SK=<sk>,GSA=<gsa>,DEH=<deh>[,CCH=<cch>];

or

HGCMI:CSP=<csp>,VTTDP=<vttdp>,SK=<sk>,GSA=<gsa>,DEH=<deh>[,CCH=<cch>];

}

Where

<msisdn> = MSISDN.

<csp> = CAMEL subscription profile.

<mmtdp> = Mobility Management CAMEL Subscription Data Trigger Detection Point.

<dstdp> = Dialled service CAMEL Subscription Data Trigger Detection Point.

<dialnum> = Dialled number.

<tsmstdp> = Terminating SMS CAMEL Subscription Data Trigger Detection Point.

<osmstdp> = Originating SMS Trigger Detection Point.

<gprstdp> = GPRS CAMEL Trigger Detection Point.

<octdp> = Originating CAMEL Subscription Data Trigger Detection Point.

Page 107: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 93

<tctdp> = Terminating CAMEL Subscription Data Trigger Detection Point.

<vttdp> = Visited Mobile Switching Centre terminating Trigger Detection Point.

<sk> = Service Key.

<gsa> = GSM service control function address.

<deh> = Default Error Handling.

<cch> = CAMEL Capability Handling.

<i> = Inhibitor Indicator.

Note:1 User should provide either MSISDN or CSP parameter even these parameters are optional.

Note:2 Addition of DSTDP, TSMSTDP and VTTDP is not currently supported by the model switch at Telstra. Hence the rollback of these

services is not supported either. These features could be required in a further enhancement.

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ADD_CAMEL-RB_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ADD_CAMEL-RB_RETURN_INFO = <NE error code>:<NE error description>

A_ERIC-HLR_R12-0_ADD_CAWAdds the call waiting feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.addCAW.

Table 67: A_ERIC-HLR_R12-0_ADD_CAW

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

BSG Basic service group. S O

Page 108: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

94 Oracle Corporation

MML commandsHGSSI:MSISDN=<msisdn>,SS=CAW[,BSG=<bsg>];

where

<msisdn> = MSISDN.

<bsg> = Basic Service Group

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ADD_CAW_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ADD_CAW_RETURN_INFO = <NE error code>:<NE error description>

A_ERIC-HLR_R12-0_ADD_CFBAdds the call forwarding on mobile subscriber busy feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.addCFB.

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 68: A_ERIC-HLR_R12-0_ADD_CFB

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

BSG Basic service group. S O

Table 67: A_ERIC-HLR_R12-0_ADD_CAW

Parameter Name Description RangeDefault Value

Type Class

Page 109: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 95

MML commandsHGSSI:MSISDN=<msisdn>,SS=CFB[,BSG=<bsg>],FNUM=<fnum>[,OFA=<ofa>][,TIME=<time>][,SADD=<sadd>];

where

<msisdn> = MSISDN.

<bsg> = Basic Service Group.

<fnum> = Call Forwarding Number.

<ofa> = Origin for forwarded to number analysis.

<sadd> = Forwarded to subaddress information

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ADD_CFB_UDET = <user defined exit type>

Return as info parameters :

FNUM Call forwarding number.

S R

OFA Origin for forwarded-to number analysis.

0 - 512 S O

SADD Forwarded-to subaddress information.

Format: typesadd -subadd.

typesadd values maybe 0,1,2 subadd maybe 2 to 40 characters

S O

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 68: A_ERIC-HLR_R12-0_ADD_CFB

Parameter Name Description RangeDefault Value

Type Class

Page 110: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

96 Oracle Corporation

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ADD_CFB_RETURN_INFO = <NE error code>:<NE error description>

A_ERIC-HLR_R12-0_ADD_CFNRCAdds the call forwarding on mobile subscriber not reachable feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.addCFNRC.

MML commandsHGSSI:MSISDN=<msisdn>,SS=CFNRC[,BSG=<bsg>],FNUM=<fnum>[,OFA=<ofa>][,TIME=<time>][,SADD=<sadd>];

where

Table 69: A_ERIC-HLR_R12-0_ADD_CFNRC

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

BSG Basic service group. S O

FNUM Call forwarding number.

S R

OFA Origin for forwarded-to number analysis.

0 - 512 S O

SADD Forwarded-to subaddress information.

Format: typesadd -subadd.

typesadd values maybe 0,1,2 subadd maybe 2 to 40 characters

S O

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 111: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 97

<msisdn> = MSISDN.

<bsg> = Basic Service Group.

<fnum> = Call Forwarding Number.

<ofa> = Origin for forwarded to number analysis.

<sadd> = Forwarded to subaddress information

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ADD_CFNRC_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ADD_CFNRC_RETURN_INFO = <NE error code>:<NE error description>

A_ERIC-HLR_R12-0_ADD_CFNRYAdds the call forwarding on no reply feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.addCFNRY.

Table 70: A_ERIC-HLR_R12-0_ADD_CFNRY

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

BSG Basic service group. S O

FNUM Call forwarding number.

S R

OFA Origin for forwarded-to number analysis.

0 - 512 S O

TIME No reply timer in seconds.

5 to 30 in steps of 5 S O

Page 112: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

98 Oracle Corporation

MML commandsHGSSI:MSISDN=<msisdn>,SS=CFNRY[,BSG=<bsg>],FNUM=<fnum>[,OFA=<ofa>][,TIME=<time>][,SADD=<sadd>];

where

<msisdn> = MSISDN.

<bsg> = Basic Service Group.

<fnum> = Call Forwarding Number.

<ofa> = Origin for forwarded to number analysis.

<time> = No reply timer in seconds.

<sadd> = Forwarded to subaddress information

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ADD_CFNRY_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ADD_CFNRY_RETURN_INFO = <NE error code>:<NE error description>

SADD Forwarded-to subaddress information.

Format: typesadd -subadd.

typesadd values maybe 0,1,2 subadd maybe 2 to 40 characters

S O

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 70: A_ERIC-HLR_R12-0_ADD_CFNRY

Parameter Name Description RangeDefault Value

Type Class

Page 113: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 99

A_ERIC-HLR_R12-0_ADD_CFSAdds the call forwarding services feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.addCFS.

MML commandsHGSSI:MSISDN=<msisdn>,SS=CFS[,BSG=<bsg>],FNUM=<fnum>[,OFA=<ofa>][,TIME=<time>][,SADD=<sadd>];

where

<msisdn> = MSISDN.

Table 71: A_ERIC-HLR_R12-0_ADD_CFS

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

BSG Basic service group. S O

FNUM Call forwarding number.

S R

OFA Origin for forwarded-to number analysis.

0 - 512 S O

TIME No reply timer in seconds.

5 to 30 in steps of 5 S O

SADD Forwarded-to subaddress information.

Format: typesadd -subadd.

typesadd values maybe 0,1,2 subadd maybe 2 to 40 characters

S O

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 114: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

100 Oracle Corporation

<bsg> = Basic Service Group.

<fnum> = Call Forwarding Number.

<ofa> = Origin for forwarded to number analysis.

<time> = No reply timer in seconds.

<sadd> = Forwarded to subaddress information.

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ADD_CFS_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ADD_CFS_RETURN_INFO = <NE error code>:<NE error description>

A_ERIC-HLR_R12-0_ADD_CFUAdds the call forwarding unconditional feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.addCFU.

Table 72: A_ERIC-HLR_R12-0_ADD_CFU

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

BSG Basic service group. S O

FNUM Call forwarding number.

S R

OFA Origin for forwarded-to number analysis.

0 - 512 S O

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 115: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 101

MML commandsHGSSI:MSISDN=<msisdn>,SS=CFU[,BSG=<bsg>],FNUM=<fnum>[,OFA=<ofa>][,TIME=<time>][,SADD=<sadd>];

where

<msisdn> = MSISDN.

<bsg> = Basic Service Group.

<fnum> = Call Forwarding Number.

<ofa> = Origin for forwarded to number analysis.

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ADD_CFU_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ADD_CFU_RETURN_INFO = <NE error code>:<NE error description>

A_ERIC-HLR_R12-0_ADD_CUGAdds the mobile subscriber to a closed user group feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.addCUG.

Table 73: A_ERIC-HLR_R12-0_ADD_CUG

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

INDEX Closed user group index.

0 - 32767 S R

Page 116: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

102 Oracle Corporation

MML commandsHGCUI:MSISDN=<msisdn>,INDEX=<index>,IC=<ic>[,RESTR=<restr>][,BSG=<bsg>];

where<msisdn> = MSISDN

<index> = Closed user group index

<ic> = Closed user group interlock code

<restr> = Intra group restrictions

<bsg> = Basic service group identifier. Ex: TS10&TS60 <BR>

IC Closed user group interlock code.

Expressed as [ni-] cugcode.

ni - network identity (000-999 range)cugcode - closed user group code (0 to 65535)

S R

RESTRICTION CUG restrictions. ICB - Incoming calls barred within closed user groupOCB - Outgoing calls barred within closed user groupNONE - No restrictions within closed user group

S O

BSG Basic service group identifier.

The basic service groups may also be specified as a list.

Example: TS10, TS60

S O

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 73: A_ERIC-HLR_R12-0_ADD_CUG

Parameter Name Description RangeDefault Value

Type Class

Page 117: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 103

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ADD_CUG_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ADD_CUG_RETURN_INFO = <NE error code>:<NE error description>

A_ERIC-HLR_R12-0_ADD_DCFAdds the default call forwarding feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.addDCF.

MML commandsHGSSI:MSISDN=<msisdn>,SS=DCF[,BSG=<bsg>],FNUM=<fnum>[,OFA=<ofa>][,TIME=<time>];

where

Table 74: A_ERIC-HLR_R12-0_ADD_DCF

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

BSG Basic service group. S O

FNUM Call forwarding number.

S R

OFA Origin for forwarded-to number analysis.

0 - 512 S O

TIME No reply timer in seconds.

Ranges from 5 to 30 in steps of 5.

S O

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 118: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

104 Oracle Corporation

<msisdn> = MSISDN.

<bsg> = Basic Service Group.

<fnum> = Call Forwarding Number.

<ofa> = Origin for forwarded to number analysis.

<time> = No reply timer in seconds.

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ADD_DCF_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ADD_DCF_RETURN_INFO = <NE error code>:<NE error description>

A_ERIC-HLR_R12-0_ADD_FEATURESAdds the multiple features with optimized MMLs feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLROptProvisioning.addFeatures.

Table 75: A_ERIC-HLR_R12-0_ADD_FEATURES

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

Page 119: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 105

MML commandsHGSSI:MSISDN=<msisdn>,SS=<ss>[,BSG=<bsg>][,FNUM=<fnum>[,OFA=<ofa>][,TIME=<time>][,SADD=<sadd>]];

where<bsg> = Basic Service Group

<fnum> = Forwarded-to number

<msisdn> = MSISDN

<ofa> = Origin for forwarded to number analysis

<sadd> = Forwarded to subaddress information

<ss> = Supplementary Service

<time> = No reply condition timer in seconds

Output parameters

Return as CSDL Parameter :

FEATURES Multiple features to be added using MML optimization.FEATURES[i].MSISDNFEATURES[i].SUD_CODEFEATURES[i].BSGFEATURES[i].FNUMFEATURES[i].OFAFEATURES[i].TIMEFEATURES[i].SADD where i is anynumber

C R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 75: A_ERIC-HLR_R12-0_ADD_FEATURES

Parameter Name Description RangeDefault Value

Type Class

Page 120: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

106 Oracle Corporation

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ADD_FEATURES_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ADD_FEATURES_RETURN_INFO = <NE error code>:<NE error description>

A_ERIC-HLR_R12-0_ADD_FEATURES-RBRollback funtionality for the Add multiple features with optimized mmls. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLROptProvisioning.addFeaturesRB.

Table 76: A_ERIC-HLR_R12-0_ADD_FEATURES-RB

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote Network Element name.

S R

FEATURES Multiple features to be added using MML optimization. Consists of: FEATURES[i].MSISDN,FEATURES[i].SUD_CODE,FEATURES[i].BSG,FEATURES[i].FNUM,FEATURES[i].OFA,FEATURES[i].TIME,FEATURES[i].SADD where i is any number.

C O

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S O

SUD Multiple features to be modified using MML optimization for subscriber data.Consists of SUD[i].CODE,SUD[i].VALUE where i is any number.

C O

Page 121: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 107

MML commandsPermanent Subscriber Data will be first provisioned using:

HGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where

<command_code> = SUD_CODE name

<command_value> = SUD_CODE value

Additional MSISDNs wil be then provisioned using:

HGAMI:MSISDN=<msisdn>,AMSISDN=<amsisdn>,BC=<bc>;

Where

<msisdn> = MSISDN

<amsisdn> = Additional MSISDN

<bc> = Bearer Capablity Number.

Supplementary Service Data will be then provisioned using:

HGSSI:MSISDN=<msisdn>,SS=<ss>[,BSG=<bsg>][,FNUM=<fnum>[,OFA=<ofa>][,TIME=<time>][,SADD=<sadd>]];

Where:

BSG=<bsg> = Basic Service Group (BSG).

FNUM=<fnum> = Forwarded-to number Digit string 1 ~ 15 digits.Each digit is 0 - 9.

MSISDN=<msisdn> = Mobile Station ISDN Number (MSISDN).

OFA=<ofa> = Origin for forwarded-to number analysis Numeral 0 ~ 512. Note:Value 512 is an application system dependent parameter value.

AMSISDN Multiple Aditional MSISDNs to be added using MML optimization. Consists of: AMSISDN[i].AMSISDN,AMSISDN[i].BC where i is any number.

C O

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 76: A_ERIC-HLR_R12-0_ADD_FEATURES-RB

Parameter Name Description RangeDefault Value

Type Class

Page 122: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

108 Oracle Corporation

SADD=<sadd> = Forwarded-to subaddress information. Expressed as typesadd-subadd.

where:

typesadd - Type of subaddress.

0 = NSAP.

1 = User specified and even indicator.

2 = User specified and odd indicator.

subadd - Subaddress Symbolic name 2 ~ 40 characters. Each character represents an hexadecimal value, 0 - 9, A - F.

SS=<ss> = Supplementary Service (SS).

TIME=<time> = No reply condition timer in seconds Digit string 5 ~ 30.

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ADD_FEATURES-RB_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ADD_FEATURES-RB_RETURN_INFO = <NE error code>:<NE error description>

A_ERIC-HLR_R12-0_ADD_GMLCAdds the GMLC address feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.addGMLC.

Table 77: A_ERIC-HLR_R12-0_ADD_GMLC

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

GMLCID GMLC identifier. Upto 5 GMLC ids may be specified.

They can be comma separated.

Example: 0,255,13

S R

Page 123: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 109

MML commandsHGSGI:MSISDN=<msisdn>,GMLCID=<gmlcid>; or HGSGI:MSISDN=<msisdn>,HGMLCID=<hgmlcid>; or HGSGI:MSISDN=<msisdn>,PPRID=<pprid>;

Where

<msisdn> = MSISDN.

<gmlcid> = Identifier of GMLC.

<hgmlcid> = Home GMLC address identifier

<pprid> = Privacy profile register access identifier

Note: Atleast one optional parameter is to be present.

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ADD_GMLC_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ADD_GMLC_RETURN_INFO = <NE error code>:<NE error description>

HGMLCID Home GMLC address Identifier.

0 - 255 S O

PPRID Privacy profile register address identifier

0 - 255 S O

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 77: A_ERIC-HLR_R12-0_ADD_GMLC

Parameter Name Description RangeDefault Value

Type Class

Page 124: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

110 Oracle Corporation

A_ERIC-HLR_R12-0_ADD_GPRSAdds the GPRS services feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.addGPRS.

Table 78: A_ERIC-HLR_R12-0_ADD_GPRS

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S O

IMSI International mobile subscriber identity.

S O

EQOSID Extended quality of service identifier.

0 - 4095 C R

APNID Access point name identifier.

0 - 16383 C N

PDPADD Packet data protocol address.

This value is specified as an IP address.

Example: oc1.oc2.oc3.oc4

where oc is an octet in the range of 0 to 255.

C N

PDPTY Packet data protocol context type.

IPV4 - IP version 4 PPP - point to point protocol

C N

PDPCH Packet data protocol context charging characteristics.

1 - 15 C N

Page 125: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 111

MML commandsHGPDI:MSISDN=<msisdn>,EQOSID=<eqosid>[,APNID=<apnid>][,PDPADD=<pdpadd>][,PDPTY=<pdpty>][,PDPCH=<pdpch>][,VPAA][,PDPID=pdpid];

or

HGPDI:IMSI=<imsi>,EQOSID=<eqosid>[,APNID=<apnid>][,PDPADD=<pdpadd>][,PDPTY=<pdpty>][,PDPCH=<pdpch>][,VPAA][,PDPID=<pdpid>];

where<imsi> = IMSI

<msisdn> = MSISDN

<eqosid> = Extended Quality of Service

<apnid> = Access Point Name identifier

<pdpadd> = Packet Data Protocol (PDP) address

<pdpch> = Packet Data Protocol (PDP) context type

<pdpty> = Packet Data Protocol (PDP) charging characteristics

<vpaa> = Visited Public Land Mobile Network (VPLMN) address allowed

<pdpid> = PDP context identifier

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ADD_GPRS_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ADD_GPRS_RETURN_INFO = <NE error code>:<NE error description>

VPAA Visited public land mobile address allowed.

Y/N C N

PDPID PDP context identifier. 1 - 10 C N

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 78: A_ERIC-HLR_R12-0_ADD_GPRS

Parameter Name Description RangeDefault Value

Type Class

Page 126: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

112 Oracle Corporation

A_ERIC-HLR_R12-0_ADD_GPRS-RBRollback functionality for the Add GPRS Service. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLROptProvisioning.addGPRSRB.

MML commandsHGPDI:MSISDN=<msisdn>,EQOSID=<eqosid>[,APNID=<apnid>][,PDPADD=<pdpadd>][,PDPTY=<pdpty>][,PDPCH=<pdpch>][,VPAA][,PDPID=pdpid];

or

HGPDI:IMSI=<imsi>,EQOSID=<eqosid>[,APNID=<apnid>][,PDPADD=<pdpadd>][,PDPTY=<pdpty>][,PDPCH=<pdpch>][,VPAA][,PDPID=<pdpid>];

Where

<imsi> = IMSI.

Table 79: A_ERIC-HLR_R12-0_ADD_GPRS-RB

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote Network Element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S O

IMSI International Mobile Subscriber Identity Series.

Digit String 6-15 digits. Each digit is 0-9.

S O

PDPCD Multiple Subscriber Packet Data Protocol Context Data to be added using MML optimization. Consists of PDPCD[i].APNID,PDPCD[i].PDPADD,PDPCD[i].EQOSID,PDPCD[i].VPAA,PDPCD[i].PDPCH,PDPCD[i].PDPTY,PDPCD[i].PDPID where i is any number.

C R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 127: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 113

<msisdn> = MSISDN.

<eqosid> = Extended Quality of Service.

<apnid> = Access Point Name identifier.

<pdpadd> = Packet Data Protocol (PDP) address.

<pdpch> = Packet Data Protocol (PDP) context type.

<pdpty> = Packet Data Protocol (PDP) charging characteristics.

<vpaa> = Visited Public Land Mobile Network (VPLMN) address allowed.

<pdpid> = PDP context identifier.

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ADD_GPRS-RB_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ADD_GPRS-RB_RETURN_INFO = <NE error code>:<NE error description>

A_ERIC-HLR_R12-0_ADD_LOC-SERVICESAdds the location services feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.addLocServices.

Table 80: A_ERIC-HLR_R12-0_ADD_LOC-SERVICES

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

UNIV Universal location services privacy class.

Only valid values are YES or NO

S O

CREL Call related location services privacy class.

Only valid values are YES or NO

S O

CUNRL Call unrelated location services privacy class.

Only valid values are YES or NO

S O

Page 128: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

114 Oracle Corporation

PLMNO PLMN Operator location services privacy class.

Only valid values are YES or NO

S O

INTID Internal identity list. Valid values are from 0 to 4. The list maybe comma separated.Ex: 0,1,3,4

S O

MOCL Location services mobile originating class list.

ASL - autonomous shelf locationBSL - basic shelf locationTTP - transfer to third party.

The list can be comma separated.

Example: BSL, ASL

S O

SERVT Public land mobile network (PLMN) operator LCS privacy class service type.

The valid values are a list from 0 to 127.

S O

EADD External location services client address.

Defined as E.164 number.

The value must be of length 3 to 15 digits.

S O

GRES Restriction on the Gateway Mobile Location Center (GMLC).

0 - only GMLCs defined in subscriber GMLC address list1 - any GMLC in the home country

S O

Table 80: A_ERIC-HLR_R12-0_ADD_LOC-SERVICES

Parameter Name Description RangeDefault Value

Type Class

Page 129: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 115

MML commandsHGLDI:MSISDN=<msisdn>,UNIV; or HGLDI:MSISDN=<msisdn>,CREL[,NOTF=<notf>]; or HGLDI:MSISDN=<msisdn>,CUNRL[,NOTF=<notf>]; or HGLDI:MSISDN=<msisdn>,PLMNO[,INTID=<intid>]; or HGLDI:MSISDN=<msisdn>,MOCL=<mocl>; or HGLDI:MSISDN=<msisdn>,SERVT=<servt>[,GRES=<gres>][,NOTF=<notf>]; or HGLDI:MSISDN=<msisdn>,EADD=<eadd>[,GRES=<gres>][,NOTF=<notf>][,CREL]; or HGLDI:MSISDN=<msisdn>,EADD=<eadd>[,GRES=<gres>][,NOTF=<notf>][,CUNRL];

where<msisdn> = MSISDN

CREL = Call related Location services privacy class

CUNRL = Call Unrelated location services privacy class

PLMNO = PLMN Operator location services privacy class

<intid> = Internal Identity List

NOTF Location request restriction related to the notification to the mobile subscriber.

0 - location request allowed without notification1 - location request with notification2 - location request with notification and privacy verification allowed3 - location request with notification and privacy verification restricted

S O

EADD_CREL Call related location services privacy class.

Only valid values are YES or NO

S O

EADD_CUNRL Call unrelated location services privacy class.

Only valid values are YES or NO

S O

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 80: A_ERIC-HLR_R12-0_ADD_LOC-SERVICES

Parameter Name Description RangeDefault Value

Type Class

Page 130: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

116 Oracle Corporation

UNIV = Universal location services privacy class

<mocl> = Location services Mobile Originating Class List

<servt> = Service Type

<eadd> = External location services client Address

<notf> = Location request restriction related to the notification to themobile subscriber

<gres> = Restriction on the Gateway Mobile Location Center

Note: at least one of the optional parameters is needed

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ADD_LOC-SERVICES_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ADD_LOC-SERVICES_RETURN_INFO = <NE error code>:<NE error description>

A_ERIC-HLR_R12-0_ADD_SPNAdds the single personal number feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.addSPN.

Table 81: A_ERIC-HLR_R12-0_ADD_SPN

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

BSG Basic service group. S O

FNUM Call forwarding number.

S O

OFA Origin for forwarded-to number analysis.

0 - 512 S O

TIME No reply timer in seconds.

5 to 30 in steps of 5 S O

Page 131: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 117

MML commandsHGSSI:MSISDN=<msisdn>,SS=SPN[,BSG=<bsg>][,FNUM=<fnum>[,OFA=<ofa>][,TIME=<time>][,SADD=<sadd>]];

where <msisdn> = MSISDN

<bsg> = Basic Service Group

<fnum> = Call Forwarding Number

<ofa> = Origin for forwarded to number analysis

<time> = No reply timer in seconds

<sadd> = Forwarded to subaddress information

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ADD_SPN_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ADD_SPN_RETURN_INFO = <NE error code>:<NE error description>

SADD Forwarded-to subaddress information.

Format: typesadd -subadd.

typesadd values maybe 0,1,2 subadd maybe 2 to 40 characters

S O

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 81: A_ERIC-HLR_R12-0_ADD_SPN

Parameter Name Description RangeDefault Value

Type Class

Page 132: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

118 Oracle Corporation

A_ERIC-HLR_R12-0_ADD_SMS-SPAM-DATAActivate Short Message Service Centre address series. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_r12_0.prov.HLRProvisioning.addSMSC.

MML commandsHGPSI:MSISDN=<msisdn>,SCADDS=<scadds>;

where

<msisdn> = MSISDN.

<scadds> = Short Message Service Centre (SMSC) address series.

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ADD_SMS-SPAM-DATA_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_ADD_SMS-SPAM-DATA_RETURN_INFO = <NE error code>:<NE error description>

Table 82: A_ERIC-HLR_R12-0_ADD_SMS-SPAM-DATA

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote Network Element Name

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

SCADDS Short Message Service Centre address series

Digit String 5-15 digits. Each digit is 0-9.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 133: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 119

A_ERIC-HLR_R12-0_VIRTUAL_ADD-GPRSVirtual Add GPRS Services. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.virtualAddGPRS.

MML commandsNone

Output parameters

None

A_ERIC-HLR_R12-0_VIRTUAL_ADD-NAMVirtual Modify Network Access Mode. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.virtualModNAM.

MML commandsNone

Table 83: A_ERIC-HLR_R12-0_VIRTUAL_ADD-GPRS

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote Network Element name

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 84: A_ERIC-HLR_R12-0_VIRTUAL_ADD-NAM

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote Network Element name

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 134: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

120 Oracle Corporation

Output parameters

None

A_ERIC-HLR_R12-0_VIRTUAL_ADD-FEATURESVirtual Add multiple features with optimized mmls. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.virtualAddFeatures.

MML commandsNone

Output parameters

None

A_ERIC-HLR_R12-0_CREATE_MULTIPLE-SUBSCRIPTIONCreate multiple subscription data. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_r12_0.prov.HLRProvisioning.createMultipleSubscription.

Table 85: A_ERIC-HLR_R12-0_VIRTUAL_ADD-FEATURES

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote Network Element name

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 86: A_ERIC-HLR_R12-0_CREATE_MULTIPLE-SUBSCRIPTION

Parameter Name Description RangeDefault Value

Type Class

IMSI International Mobile Subscriber Identity.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

Page 135: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 121

MML commandsHGMSI:MSISDN=<msisdn>,IMSI=<imsi>,MCH=<mch>;

Where

<imsi> = IMSI.

<msisdn> = MSISDN.

<mch> = Multiple subscription activation mechanism.

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_CREATE_MULTIPLE-SUBSCRIPTION_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_CREATE_MULTIPLE-SUBSCRIPTION_RETURN_INFO = <NE error code>:<NE error description>

MCH Multiple subscription activation mechanism.

S R

MCLI Remote Network Element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes.

S O

Table 86: A_ERIC-HLR_R12-0_CREATE_MULTIPLE-SUBSCRIPTION

Parameter Name Description RangeDefault Value

Type Class

Page 136: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

122 Oracle Corporation

A_ERIC-HLR_R12-0_CREATE_SUBSCRIPTIONCreates the GSM HLR subscription feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.createSubscription.

MML commandsHGSUI:IMSI=<imsi>,MSISDN=<msisdn>[,PROFILE=<profile>][,LMU];

where<imsi> = IMSI

<msisdn> = MSISDN

<profile> = Optional profile number

<LMU> = Location Measurement Unit

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_CREATE_SUBSCRIPTION_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_CREATE_SUBSCRIPTION_RETURN_INFO = <NE error code>:<NE error description>

Table 87: A_ERIC-HLR_R12-0_CREATE_SUBSCRIPTION

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

IMSI IMSI. S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

PROFILE Profile number. S O

LMU Location measurement unit.

Y/N S O

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 137: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 123

A_ERIC-HLR_R12-0_VIRTUAL_CREATE-SUBSCRIPTIONVirtual Create GSM HLR subscription. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.virtualCreateSubscription.

Table 88: A_ERIC-HLR_R12-0_VIRTUAL_CREATE-SUBSCRIPTION

MML commandsNone

Output parameters

None

A_ERIC-HLR_R12-0_DEACT_BAICDeactivate Barring of All Incoming Calls. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.deactBAIC.

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote Network Element name

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 89: A_ERIC-HLR_R12-0_DEACT_BAIC

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 138: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

124 Oracle Corporation

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = BAIC

<command_value> = 0

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_DEACT_BAIC_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_DEACT_BAIC_RETURN_INFO = <NE error code>:<NE error description>

A_ERIC-HLR_R12-0_DEACT_BAOCDeactivate Barring of All Outgoing Calls. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.deactBAOC.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = BAOC

<command_value> = 0

Table 90: A_ERIC-HLR_R12-0_DEACT_BAOC

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 139: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 125

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_DEACT_BAOC_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_DEACT_BAOC_RETURN_INFO = <NE error code>:<NE error description>

A_ERIC-HLR_R12-0_DEACT_BICRODeactivate Barring of All Incoming Calls when roaming outside the home PLMN country. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.deactBICRO.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = BICRO

<command_value> = 0

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_DEACT_BICRO_UDET = <user defined exit type>

Table 91: A_ERIC-HLR_R12-0_DEACT_BICRO

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 140: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

126 Oracle Corporation

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_DEACT_BICRO_RETURN_INFO = <NE error code>:<NE error description>

A_ERIC-HLR_R12-0_DEACT_BOICDeactivate Barring of All Outgoing International Calls. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.deactBOIC.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = BOIC

<command_value> = 0

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_DEACT_BOIC_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_DEACT_BOIC_RETURN_INFO = <NE error code>:<NE error description>

Table 92: A_ERIC-HLR_R12-0_DEACT_BOIC

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 141: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 127

A_ERIC-HLR_R12-0_DEACT_BOIEXHDeactivates the barring of all outgoing international calls except those directed to the home PLMN country feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.deactBOIEXH.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = BOIEXH

<command_value> = 0

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_DEACT_BOIEXH_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_DEACT_BOIEXH_RETURN_INFO = <NE error code>:<NE error description>

Table 93: A_ERIC-HLR_R12-0_DEACT_BOIEXH

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 142: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

128 Oracle Corporation

A_ERIC-HLR_R12-0_DEACT_BS21Deactivates the datacircuit asynchronous 300 baud feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.deactBS21.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = BS21

<command_value> = 0

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_DEACT_BS21_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_DEACT_BS21_RETURN_INFO = <NE error code>:<NE error description>

Table 94: A_ERIC-HLR_R12-0_DEACT_BS21

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 143: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 129

A_ERIC-HLR_R12-0_DEACT_BS22Removes the datacircuit asynchronous 1200 baud feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.deactBS22.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = BS22

<command_value> = 0

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_DEACT_BS22_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_DEACT_BS22_RETURN_INFO = <NE error code>:<NE error description>

Table 95: A_ERIC-HLR_R12-0_DEACT_BS22

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 144: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

130 Oracle Corporation

A_ERIC-HLR_R12-0_DEACT_BS23Deactivates the datacircuit asynchronous 1200-75 baud feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.deactBS23.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = BS23

<command_value> = 0

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_DEACT_BS23_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_DEACT_BS23_RETURN_INFO = <NE error code>:<NE error description>

Table 96: A_ERIC-HLR_R12-0_DEACT_BS23

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 145: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 131

A_ERIC-HLR_R12-0_DEACT_BS24Deactivates the datacircuit asynchronous 2400 baud feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.deactBS24.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = BS24

<command_value> = 0

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_DEACT_BS24_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_DEACT_BS24_RETURN_INFO = <NE error code>:<NE error description>

Table 97: A_ERIC-HLR_R12-0_DEACT_BS24

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 146: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

132 Oracle Corporation

A_ERIC-HLR_R12-0_DEACT_BS25Deactivates the datacircuit asynchronous 4800 baud feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.deactBS25.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = BS25

<command_value> = 0

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_DEACT_BS25_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_DEACT_BS25_RETURN_INFO = <NE error code>:<NE error description>

Table 98: A_ERIC-HLR_R12-0_DEACT_BS25

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 147: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 133

A_ERIC-HLR_R12-0_DEACT_BS26Deactivates the datacircuit asynchronous 9600 baud feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.deactBS26.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = BS26

<command_value> = 0

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_DEACT_BS26_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_DEACT_BS26_RETURN_INFO = <NE error code>:<NE error description>

Table 99: A_ERIC-HLR_R12-0_DEACT_BS26

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 148: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

134 Oracle Corporation

A_ERIC-HLR_R12-0_DEACT_BS2GDeactivates the general asynchronous bearer service feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.deactBS2G.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = BS2G

<command_value> = 0

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_DEACT_BS2G_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_DEACT_BS2G_RETURN_INFO = <NE error code>:<NE error description>

Table 100: A_ERIC-HLR_R12-0_DEACT_BS2G

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 149: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 135

A_ERIC-HLR_R12-0_DEACT_BS31Deactivates the datacircuit synchronous 1200 baud feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.deactBS31.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = BS31

<command_value> = 0

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_DEACT_BS31_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_DEACT_BS31_RETURN_INFO = <NE error code>:<NE error description>

Table 101: A_ERIC-HLR_R12-0_DEACT_BS31

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 150: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

136 Oracle Corporation

A_ERIC-HLR_R12-0_DEACT_BS32Deactivates the datacircuit synchronous 2400 baud feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.deactBS32.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = BS32

<command_value> = 0

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_DEACT_BS32_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_DEACT_BS32_RETURN_INFO = <NE error code>:<NE error description>

Table 102: A_ERIC-HLR_R12-0_DEACT_BS32

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 151: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 137

A_ERIC-HLR_R12-0_DEACT_BS33Deactivates the datacircuit synchronous 4800 baud feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.deactBS33.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = BS33

<command_value> = 0

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_DEACT_BS33_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_DEACT_BS33_RETURN_INFO = <NE error code>:<NE error description>

Table 103: A_ERIC-HLR_R12-0_DEACT_BS33

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 152: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

138 Oracle Corporation

A_ERIC-HLR_R12-0_DEACT_BS34Deactivates the datacircuit synchronous 9600 baud feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.deactBS34.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = BS34

<command_value> = 0

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_DEACT_BS34_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_DEACT_BS34_RETURN_INFO = <NE error code>:<NE error description>

Table 104: A_ERIC-HLR_R12-0_DEACT_BS34

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 153: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 139

A_ERIC-HLR_R12-0_DEACT_BS3GDeactivates the general synchronous bearer service feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.deactBS3G.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = BS3G

<command_value> = 0

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_DEACT_BS3G_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_DEACT_BS3G_RETURN_INFO = <NE error code>:<NE error description>

Table 105: A_ERIC-HLR_R12-0_DEACT_BS3G

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 154: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

140 Oracle Corporation

A_ERIC-HLR_R12-0_DEACT_CAWDeactivates the call waiting feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.deactCAW.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = CAW

<command_value> = 0

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_DEACT_CAW_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_DEACT_CAW_RETURN_INFO = <NE error code>:<NE error description>

Table 106: A_ERIC-HLR_R12-0_DEACT_CAW

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 155: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 141

A_ERIC-HLR_R12-0_DEACT_CFBDeactivates the call forwarding on mobile subscriber busy feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.deactCFB.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = CFB

<command_value> = 0

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_DEACT_CFB_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_DEACT_CFB_RETURN_INFO = <NE error code>:<NE error description>

Table 107: A_ERIC-HLR_R12-0_DEACT_CFB

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 156: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

142 Oracle Corporation

A_ERIC-HLR_R12-0_DEACT_CFNRCDeactivates the call forwarding on mobile subscriber not reachable feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.deactCFNRC.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = CFNRC

<command_value> = 0

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_DEACT_CFNRC_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_DEACT_CFNRC_RETURN_INFO = <NE error code>:<NE error description>

Table 108: A_ERIC-HLR_R12-0_DEACT_CFNRC

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 157: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 143

A_ERIC-HLR_R12-0_DEACT_CFNRYDeactivates the call forwarding on no reply feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.deactCFNRY.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = CFNRY

<command_value> = 0

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_DEACT_CFNRY_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_DEACT_CFNRY_RETURN_INFO = <NE error code>:<NE error description>

Table 109: A_ERIC-HLR_R12-0_DEACT_CFNRY

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 158: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

144 Oracle Corporation

A_ERIC-HLR_R12-0_DEACT_CFUDeactivates the call forwarding unconditional feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.deactCFU.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = CFU

<command_value> = 0

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_DEACT_CFU_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_DEACT_CFU_RETURN_INFO = <NE error code>:<NE error description>

Table 110: A_ERIC-HLR_R12-0_DEACT_CFU

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 159: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 145

A_ERIC-HLR_R12-0_DEACT_CLIPDeactivates the calling line identification presentation feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.deactCLIP.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = CLIP

<command_value> = 0

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_DEACT_CLIP_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_DEACT_CLIP_RETURN_INFO = <NE error code>:<NE error description>

Table 111: A_ERIC-HLR_R12-0_DEACT_CLIP

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 160: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

146 Oracle Corporation

A_ERIC-HLR_R12-0_DEACT_CLIRDeactivates the calling line identification restriction feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.deactCLIR.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = CLIR

<command_value> = 0

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_DEACT_CLIR_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_DEACT_CLIR_RETURN_INFO = <NE error code>:<NE error description>

Table 112: A_ERIC-HLR_R12-0_DEACT_CLIR

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 161: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 147

A_ERIC-HLR_R12-0_DEACT_COLPDeactivates the connected line identification presentation feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.deactCOLP.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = COLP

<command_value> = 0

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_DEACT_COLP_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_DEACT_COLP_RETURN_INFO = <NE error code>:<NE error description>

Table 113: A_ERIC-HLR_R12-0_DEACT_COLP

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 162: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

148 Oracle Corporation

A_ERIC-HLR_R12-0_DEACT_COLRDeactivates the connected line identification restriction feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.deactCOLR.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = COLR

<command_value> = 0

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_DEACT_COLR_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_DEACT_COLR_RETURN_INFO = <NE error code>:<NE error description>

Table 114: A_ERIC-HLR_R12-0_DEACT_COLR

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 163: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 149

A_ERIC-HLR_R12-0_DEACT_EMLPPDeactivates the enhanced multi-level precedence and pre-emption feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.deactEMLPP.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = EMLPP

<command_value> = 0

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_DEACT_EMLPP_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_DEACT_EMLPP_RETURN_INFO = <NE error code>:<NE error description>

Table 115: A_ERIC-HLR_R12-0_DEACT_EMLPP

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 164: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

150 Oracle Corporation

A_ERIC-HLR_R12-0_DEACT_HOLDDeactivates the call hold feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.deactHOLD.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = HOLD

<command_value> = 0

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_DEACT_HOLD_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_DEACT_HOLD_RETURN_INFO = <NE error code>:<NE error description>

Table 116: A_ERIC-HLR_R12-0_DEACT_HOLD

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 165: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 151

A_ERIC-HLR_R12-0_DEACT_ICIDeactivates the immediate call itemization feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.deactICI.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = ICI

<command_value> = 0

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_DEACT_ICI_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_DEACT_ICI_RETURN_INFO = <NE error code>:<NE error description>

Table 117: A_ERIC-HLR_R12-0_DEACT_ICI

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 166: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

152 Oracle Corporation

A_ERIC-HLR_R12-0_DEACT_MPTYDeactivates the multi party service feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.deactMPTY.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = MPTY

<command_value> = 0

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_DEACT_MPTY_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_DEACT_MPTY_RETURN_INFO = <NE error code>:<NE error description>

Table 118: A_ERIC-HLR_R12-0_DEACT_MPTY

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 167: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 153

A_ERIC-HLR_R12-0_DEACT_OBADeactivates the operator determined barring of all incoming and outgoing calls feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.deactOBA.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = OBA

<command_value> = 0

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_DEACT_OBA_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_DEACT_OBA_RETURN_INFO = <NE error code>:<NE error description>

Table 119: A_ERIC-HLR_R12-0_DEACT_OBA

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 168: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

154 Oracle Corporation

A_ERIC-HLR_R12-0_DEACT_OBOPREDeactivates the operator determined barring of outgoing premium rate calls (Entertainment) feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.deactOBOPRE.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = OBOPRE

<command_value> = 0

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_DEACT_OBOPRE_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_DEACT_OBOPRE_RETURN_INFO = <NE error code>:<NE error description>

Table 120: A_ERIC-HLR_R12-0_DEACT_OBOPRE

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 169: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 155

A_ERIC-HLR_R12-0_DEACT_OBOPRIDeactivates the operator determined barring of outgoing premium rate calls (Information) feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.deactOBOPRI.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = OBOPRI

<command_value> = 0

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_DEACT_OBOPRI_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_DEACT_OBOPRI_RETURN_INFO = <NE error code>:<NE error description>

Table 121: A_ERIC-HLR_R12-0_DEACT_OBOPRI

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 170: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

156 Oracle Corporation

A_ERIC-HLR_R12-0_DEACT_OBSSMDeactivates the operator determined barring of supplementary service management feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.deactOBSSM.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = OBSSM

<command_value> = 0

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_DEACT_OBSSM_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_DEACT_OBSSM_RETURN_INFO = <NE error code>:<NE error description>

Table 122: A_ERIC-HLR_R12-0_DEACT_OBSSM

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 171: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 157

A_ERIC-HLR_R12-0_DEACT_OBZIDeactivates the operator determined barring of incoming inter-zonal calls. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.deactOBZI.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = OBZI

<command_value> = 0

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_DEACT_OBZI_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_DEACT_OBZI_RETURN_INFO = <NE error code>:<NE error description>

Table 123: A_ERIC-HLR_R12-0_DEACT_OBZI

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 172: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

158 Oracle Corporation

A_ERIC-HLR_R12-0_DEACT_OINDeactivates the originating intelligent network feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.deactOIN.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = OIN

<command_value> = 0

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_DEACT_OIN_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_DEACT_OIN_RETURN_INFO = <NE error code>:<NE error description>

Table 124: A_ERIC-HLR_R12-0_DEACT_OIN

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 173: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 159

A_ERIC-HLR_R12-0_DEACT_OSB1Deactivates the operator determined barring of specific barring in HPLMN (Type1) feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.deactOSB1.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = OSB1

<command_value> = 0

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_DEACT_OSB1_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_DEACT_OSB1_RETURN_INFO = <NE error code>:<NE error description>

Table 125: A_ERIC-HLR_R12-0_DEACT_OSB1

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 174: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

160 Oracle Corporation

A_ERIC-HLR_R12-0_DEACT_OSB2Deactivates the operator determined barring of Specific Barring in HPLMN (Type 2) feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.deactOSB2.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = OSB2

<command_value> = 0

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_DEACT_OSB2_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_DEACT_OSB2_RETURN_INFO = <NE error code>:<NE error description>

Table 126: A_ERIC-HLR_R12-0_DEACT_OSB2

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 175: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 161

A_ERIC-HLR_R12-0_DEACT_OSB3Deactivates the operator determined barring of specific barring in HPLMN (Type 3) feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.deactOSB3.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = OSB3

<command_value> = 0

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_DEACT_OSB3_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_DEACT_OSB3_RETURN_INFO = <NE error code>:<NE error description>

Table 127: A_ERIC-HLR_R12-0_DEACT_OSB3

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 176: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

162 Oracle Corporation

A_ERIC-HLR_R12-0_DEACT_OSB4Deactivates the operator determined barring of specific barring in HPLMN (Type 4) feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.deactOSB4.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = OSB4

<command_value> = 0

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_DEACT_OSB4_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_DEACT_OSB4_RETURN_INFO = <NE error code>:<NE error description>

Table 128: A_ERIC-HLR_R12-0_DEACT_OSB4

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 177: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 163

A_ERIC-HLR_R12-0_DEACT_PAIDeactivates the positioning allowed indicator feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.deactPAI.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = PAI

<command_value> = 0

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_DEACT_PAI_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_DEACT_PAI_RETURN_INFO = <NE error code>:<NE error description>

Table 129: A_ERIC-HLR_R12-0_DEACT_PAI

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 178: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

164 Oracle Corporation

A_ERIC-HLR_R12-0_DEACT_SOCFRCDeactivates the subscription option call forwarding on mobile subscriber not reachable feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.deactSOCFRC.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = SOCFRC

<command_value> = 1

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_DEACT_SOCFRC_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_DEACT_SOCFRC_RETURN_INFO = <NE error code>:<NE error description>

Table 130: A_ERIC-HLR_R12-0_DEACT_SOCFRC

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 179: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 165

A_ERIC-HLR_R12-0_DEACT_SOCFUDeactivates the subscription option call forwarding unconditional feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.deactSOCFU.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = SOCFU

<command_value> = 0

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_DEACT_SOCFU_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_DEACT_SOCFU_RETURN_INFO = <NE error code>:<NE error description>

Table 131: A_ERIC-HLR_R12-0_DEACT_SOCFU

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 180: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

166 Oracle Corporation

A_ERIC-HLR_R12-0_DEACT_SOCLIP Deactivates the subscription option calling line identification presentation feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.deactSOCLIP.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = SOCLIP

<command_value> = 0

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_DEACT_SOCLIP_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_DEACT_SOCLIP_RETURN_INFO = <NE error code>:<NE error description>

Table 132: A_ERIC-HLR_R12-0_DEACT_SOCLIP

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 181: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 167

A_ERIC-HLR_R12-0_DEACT_SOCOLPDeactivates the subscription option connected line identification presentation feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.deactSOCOLP.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = SOCOLP

<command_value> = 0

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_DEACT_SOCOLP_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_DEACT_SOCOLP_RETURN_INFO = <NE error code>:<NE error description>

Table 133: A_ERIC-HLR_R12-0_DEACT_SOCOLP

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 182: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

168 Oracle Corporation

A_ERIC-HLR_R12-0_DEACT_TINDeactivates the terminating intelligent network feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.deactTIN.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = TIN

<command_value> = 0

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_DEACT_TIN_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_DEACT_TIN_RETURN_INFO = <NE error code>:<NE error description>

Table 134: A_ERIC-HLR_R12-0_DEACT_TIN

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 183: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 169

A_ERIC-HLR_R12-0_DEACT_TS11Deactivates the telephony feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.deactTS11.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = TS11

<command_value> = 0

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_DEACT_TS11_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_DEACT_TS11_RETURN_INFO = <NE error code>:<NE error description>

Table 135: A_ERIC-HLR_R12-0_DEACT_TS11

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 184: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

170 Oracle Corporation

A_ERIC-HLR_R12-0_DEACT_TS21Deactivates the short message MT/PP feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.deactTS21.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = TS21

<command_value> = 0

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_DEACT_TS21_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_DEACT_TS21_RETURN_INFO = <NE error code>:<NE error description>

Table 136: A_ERIC-HLR_R12-0_DEACT_TS21

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 185: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 171

A_ERIC-HLR_R12-0_DEACT_TS22Deactivates the short message MO/PP feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.deactTS22.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = TS22

<command_value> = 0

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_DEACT_TS22_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_DEACT_TS22_RETURN_INFO = <NE error code>:<NE error description>

Table 137: A_ERIC-HLR_R12-0_DEACT_TS22

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 186: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

172 Oracle Corporation

A_ERIC-HLR_R12-0_DEACT_TS61Deactivates the alternate speech/fax group 3 transparent feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.deactTS61.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = TS61

<command_value> = 0

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_DEACT_TS61_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_DEACT_TS61_RETURN_INFO = <NE error code>:<NE error description>

Table 138: A_ERIC-HLR_R12-0_DEACT_TS61

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 187: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 173

A_ERIC-HLR_R12-0_DEACT_TS62Deactivates the automatic facsimile group 3 feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.deactTS62.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = TS62

<command_value> = 0

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_DEACT_TS62_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_DEACT_TS62_RETURN_INFO = <NE error code>:<NE error description>

Table 139: A_ERIC-HLR_R12-0_DEACT_TS62

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 188: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

174 Oracle Corporation

A_ERIC-HLR_R12-0_DEACT_TSMODeactivates the transfer of short message option feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.deactTSMO.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = TSMO

<command_value> = 0

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_DEACT_TSMO_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_DEACT_TSMO_RETURN_INFO = <NE error code>:<NE error description>

Table 140: A_ERIC-HLR_R12-0_DEACT_TSMO

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 189: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 175

A_ERIC-HLR_R12-0_DELETE_SUBSCRIPTIONDeletes the GSM HLR subscription feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.deleteSubscription.

MML commandsHGSUE: MSISDN=<msisdn>;

where<msisdn> = MSISDN

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_DELETE_SUBSCRIPTION_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_DELETE_SUBSCRIPTION_RETURN_INFO = <NE error code>:<NE error description>

Table 141: A_ERIC-HLR_R12-0_DELETE_SUBSCRIPTION

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 190: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

176 Oracle Corporation

A_ERIC-HLR_R12-0_DELETE_MULTIPLE-SUBSCRIPTIONEnds Multiple subscription data in HLR. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_r12_0.prov.HLRProvisioning.deleteMultipleSubscription.

MML commandsHGMSE:MSISDN=msisdn;

Where

<msisdn> = MSISDN.

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_DELETE_MULTIPLE-SUBSCRIPTION_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_DELETE_MULTIPLE-SUBSCRIPTION_RETURN_INFO = <NE error code>:<NE error description>

Table 142: A_ERIC-HLR_R12-0_DELETE_MULTIPLE-SUBSCRIPTION

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

S R

MCLI Remote Network Element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes.

S O

Page 191: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 177

A_ERIC-HLR_R12-0_GET_CAMELQueries the CAMEL subscription data. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.getCAMEL.

MML commandsIf (Optional parameter MSISDN provided) THEN

{

Table 143: A_ERIC-HLR_R12-0_GET_CAMEL

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S O

CSP CAMEL subscription profile.

Valid values are from 1 to 255.

S O

CRIT CAMEL triggering criteria.

Valid value CRIT.(When optional parameter CRIT is given in the command, CAMEL triggering criteria are printed)

S O

EXT Extended CAMEL data.

Valid value EXT.(When optional parameter EXT is given in the command, extended CAMEL data are printed).

S O

OPT CAMEL subscription options.

Valid value OPT.(When optional parameter OPT is given in the command, CAMEL subscription options are printed)

S O

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 192: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

178 Oracle Corporation

HGCMP:MSISDN=<msisdn>[,OPT][,EXT][,CRIT];

or

* HGCMP:MSISDN=<all>[,OPT][,EXT][,CRIT];

}

else If(Optional Parameter CSP Provided) THEN

{

HGCMP:CSP=<csp>[,OPT][,EXT][,CRIT];

or

* HGCMP:CSP=<all>[,OPT][,EXT][,CRIT];

}

where

<msisdn> = MSISDN. * All option not supported since it will cause performance problems.

<csp> = CSP. CAMEL subscription profile. * All option not supported since it will cause performance problems.

<OPT> = CAMEL subscription options. Valid value is OPT.

<EXT> = Extended CAMEL data. Valid value is EXT.

<CRIT> = CAMEL Triggering criteria. Valid value is CRIT.

Note:1 User should provide either MSISDN or CSP parameter even these parameters are optional.

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_GET_CAMEL_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_GET_CAMEL_RETURN_INFO = <NE error code>:<NE error description>

HLR CAMEL SUBSCRIPTION DATA

- BS

- BSG

- CCH

- CSP

- DEH

- DIALNUM

Page 193: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 179

- DLGH

- DNUM

- EOICK

- EOINCI

- ETICK

- ETINCI

- FTC

- GC2SO

- GC3SO

- GCSO

- GPRSSO

- GSA

- I

- MC2SO

- MC3SO

- MCSO

- MMSO

- MSISDN

- MTY

- OSMSSO

- SK

- SSLO

- TDP

- TDPTYPE

- TIF

- TSMSSO

HLR CAMEL SUBSCRIPTION PROFILE DATA

- BS

- BSG

- CCH

Page 194: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

180 Oracle Corporation

- CSP

- DEH

- DIALNUM

- DLGH

- DNUM

- EOICK

- EOINCI

- ETICK

- ETINCI

- FTC

- GC2SO

- GC3SO

- GCSO

- GPRSSO

- GSA

- I

- MC2SO

- MC3SO

- MCSO

- MMSO

- MTY

- OSMSSO

- SK

- SSLO

- TDP

- TDPTYPE

- TIF

- TSMSSO

Page 195: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 181

A_ERIC-HLR_R12-0_GET_CAMEL-RBQueries the CAMEL subscription data rollback. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.getCAMEL.

MML commandsHGCMP:MSISDN=<msisdn>[,OPT][,EXT][,CRIT];

or

* HGCMP:MSISDN=<all>[,OPT][,EXT][,CRIT];

or

HGCMP:CSP=<csp>[,OPT][,EXT][,CRIT];

or

* HGCMP:CSP=<all>[,OPT][,EXT][,CRIT];

where

<msisdn> = MSISDN. Multiple MSISDN's maybe specified by separating them with commas. * All option not supported since it will cause performance problems.

<csp> = CSP. CAMEL subscription profile. * All option not supported since it will cause performance problems.

<OPT> = CAMEL subscription options.

<EXT> = Extended CAMEL data.

<CRIT> = CAMEL Triggering criteria.

Table 144: A_ERIC-HLR_R12-0_GET_CAMEL-RB

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S O

CSP CAMEL subscription profile. .

Valid values are from 1 to 255

S O

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 196: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

182 Oracle Corporation

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_GET_CAMEL_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_GET_CAMEL_RETURN_INFO = <NE error code>:<NE error description>

Return the following info parameters as OLD parameters:

HLR CAMEL SUBSCRIPTION DATA

- CCH

- DEH

- EOICK

- EOINCI

- ETICK

- ETINCI

- GC2SO

- GC3SO

- GCSO

- GPRSSO

- GSA

- I

- MC2SO

- MC3SO

- MCSO

- MMSO

- OSMSSO

- SK

- SSLO

- TDP

- TDPTYPE

- TIF

Page 197: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 183

- TSMSSO

A_ERIC-HLR_R12-0_GET_PDPQueries the packet data protocol context data for a series of connected subscribers feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.getPDP.

MML commandsHGPDP:MSISDNS=<msisdns>;

or

HGPDP:IMSIS=<imsis>;

where <imsis> = IMSI series

<msisdns> = MSISDN series

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_GET_PDP_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_GET_PDP_RETURN_INFO = <NE error code>:<NE error description>

Table 145: A_ERIC-HLR_R12-0_GET_PDP

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDNS MSISDN series. S O

IMSIS IMSI series. S O

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 198: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

184 Oracle Corporation

A_ERIC-HLR_R12-0_GET_PDPDATAQueries the subscriber to retrieve the PDPData. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.getPDPDATA.

MML commandsHGSDP:MSISDN=<msisdn>,<TYPE_OF_QUERY>;

or

HGSDP:IMSI=<imsi>,<TYPE_OF_QUERY>;

or

HGSDP:CONNECTED,<TYPE_OF_QUERY>;

where

<imsi> = IMSI. Multiple IMSI's maybe specified by separating them with commas.

<msisdn> = MSISDN. Multiple MSISDN's maybe specified by separating them with commas.

<TYPE_OF_QUERY> = Type of query to be executed. Permitted values are ALL,SUDA,SSDA,LOC,PDP. PDP set as default.

CONNECTED = Query all connected subscribers. * Not supported since it will cause performance problems

Table 146: A_ERIC-HLR_R12-0_GET_PDPDATA

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote Network Element Name

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S O

IMSI International Mobile Subscriber Identity Series.

Digit String 6-15 digits. Each digit is 0-9.

S O

TYPE_OF_QUERY Flag indicating the type of query to be performed.

Supported values are ALL,SUDA,SSDA,LOC and PDP.

PDP S O

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 199: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 185

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_GET_PDPDATA_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_GET_PDPDATA_RETURN_INFO = <NE error code>:<NE error description>

A_ERIC-HLR_R12-0_GET_PDPDATA-RBQueries the PDP rollback data on the HLR. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_r12_0.prov.HLRProvisioning.getPDPDATARB.

MML commandsHGSDP:MSISDN=<msisdn>,<TYPE_OF_QUERY>;

or

Table 147: A_ERIC-HLR_R12-0_GET_PDPDATA-RB

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote Network Element Name

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S O

IMSI International Mobile Subscriber Identity Series.

Digit String 6-15 digits. Each digit is 0-9.

S O

TYPE_OF_QUERY Flag indicating the type of query to be performed.

Supported values are ALL,SUDA,SSDA,LOC and PDP.

PDP S O

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

PDPID List of PDPIDs in the format of PDPID[i], where i is any number.

C N

Page 200: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

186 Oracle Corporation

HGSDP:IMSI=<imsi>,<TYPE_OF_QUERY>;

or

HGSDP:CONNECTED,<TYPE_OF_QUERY>;

where

<imsi> = IMSI. Multiple IMSI's maybe specified by separating them with commas.

<msisdn> = MSISDN. Multiple MSISDN's maybe specified by separating them with commas.

<TYPE_OF_QUERY> = Type of query to be executed. Permitted values are ALL,SUDA,SSDA,LOC,PDP. PDP set as default.

CONNECTED = Query all connected subscribers. * Not supported since it will cause performance problems

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_GET_PDPDATA-RB_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_GET_PDPDATA-RB_RETURN_INFO = <NE error code>:<NE error description>

PACKET DATA PROTOCOL CONTEXT DATA

- <RETURN_DATA_PREFIX>APNID

- <RETURN_DATA_PREFIX>EQOSID

- <RETURN_DATA_PREFIX>PDPADD

- <RETURN_DATA_PREFIX>PDPCH

- <RETURN_DATA_PREFIX>PDPID

- <RETURN_DATA_PREFIX>PDPTY

- <RETURN_DATA_PREFIX>VPAA

Note:The return data is based on PDPID.

Page 201: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 187

A_ERIC-HLR_R12-0_GET_PDPIDQueries the subscriber to retrieve the PDPID. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.getPDPID.

MML commandsHGSDP:MSISDN=<msisdn>,<TYPE_OF_QUERY>;

or

HGSDP:IMSI=<imsi>,<TYPE_OF_QUERY>;

or

HGSDP:CONNECTED,<TYPE_OF_QUERY>;

where

<imsi> = IMSI. Multiple IMSI's maybe specified by separating them with commas.

<msisdn> = MSISDN. Multiple MSISDN's maybe specified by separating them with commas.

<TYPE_OF_QUERY> = Type of query to be executed. Permitted values are ALL,SUDA,SSDA,LOC,PDP. It will be set as PDP as default, since only the PDP info is relevant to this query.

CONNECTED = Query all connected subscribers. * Not supported since it will cause performance problems.

Table 148: A_ERIC-HLR_R12-0_GET_PDPID

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote Network Element name

S R

MSISDN Mobile Station ISDN Number

Digit String 5-15 digits. Each digit is 0-9.

S O

IMSI International Mobile Subscriber Identity Series.

Digit String 6-15 digits. Each digit is 0-9.

S O

APNID List of APNIDs in the format of APNID[i], where i is any number.

C N

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 202: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

188 Oracle Corporation

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_GET_PDPID_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_GET_PDPID_RETURN_INFO = <NE error code>:<NE error description>

A_ERIC-HLR_R12-0_GET_PDPID-RBQueries the subscriber rollback data on the HLR. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_r12_0.prov.HLRProvisioning.getPDPIDRB.

MML commandsHGSDP:MSISDN=<msisdn>,<TYPE_OF_QUERY>;

or

HGSDP:IMSI=<imsi>,<TYPE_OF_QUERY>;

or

HGSDP:CONNECTED,<TYPE_OF_QUERY>;

Table 149: A_ERIC-HLR_R12-0_GET_PDPID-RB

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote Network Element name

S R

MSISDN Mobile Station ISDN Number

Digit String 5-15 digits. Each digit is 0-9.

S O

IMSI International Mobile Subscriber Identity Series.

Digit String 6-15 digits. Each digit is 0-9.

S O

APNID List of APNIDs in the format of APNID[i], where i is any number.

C N

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 203: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 189

where

<imsi> = IMSI. Multiple IMSI's maybe specified by separating them with commas.

<msisdn> = MSISDN. Multiple MSISDN's maybe specified by separating them with commas.

<TYPE_OF_QUERY> = Type of query to be executed. Permitted values are ALL,SUDA,SSDA,LOC,PDP. It will be set as PDP as default, since only the PDP info is relevant to this query.

CONNECTED = Query all connected subscribers. * Not supported since it will cause performance problems.

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_GET_PDPID-RB_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_GET_PDPID-RB_RETURN_INFO = <NE error code>:<NE error description>

Returned data :

The PDPID Data as compound parameter from the given APNID data.

A_ERIC-HLR_R12-0_GET_SERVICE-ADDRESSESQueries all the Service Center addresses stored in the message waiting data list. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.getServiceAddresses.

Table 150: A_ERIC-HLR_R12-0_GET_SERVICE-ADDRESSES

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S O

IMSI IMSI. S O

Page 204: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

190 Oracle Corporation

MML commandsHGMWP:MSISDN=<msisdn>;

or

HGMWP:IMSI=<imsi>;

where

<imsi> = IMSI.

<msisdn> = MSISDN.

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_GET_SERVICE-ADDRESSES_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_GET_SERVICE-ADDRESSES_RETURN_INFO = <NE error code>:<NE error description>

- IMSI

- MCE

- MNRF

- MNRG

- MSISDN

- SCADD

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 150: A_ERIC-HLR_R12-0_GET_SERVICE-ADDRESSES

Parameter Name Description RangeDefault Value

Type Class

Page 205: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 191

A_ERIC-HLR_R12-0_GET_SUBSCRIBERQueries the HLR subscriber. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.getSubscriber.

MML commandsHGSDP:MSISDN=<msisdn>,<TYPE_OF_QUERY>;

or

HGSDP:IMSI=<imsi>,<TYPE_OF_QUERY>;

or

HGSDP:CONNECTED,<TYPE_OF_QUERY>;

where

<imsi> = IMSI. Multiple IMSI's maybe specified by separating them with commas.

<msisdn> = MSISDN. Multiple MSISDN's maybe specified by separating them with commas.

Table 151: A_ERIC-HLR_R12-0_GET_SUBSCRIBER

Parameter Name Description RangeDefault Value

Type Class

MCLI MCLI S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S O

IMSI IMSI S O

CONNECTED Flag to query on all connected subscribers. Valid values are YES or NO.

S O

TYPE_OF_QUERY Flag indicating the type of query to be performed. Supported values are ALL,SUDA,SSDA,LOC and PDP.

S O

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 206: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

192 Oracle Corporation

<TYPE_OF_QUERY> = Type of query to be executed. Permitted values are ALL,SUDA,SSDA,LOC,PDP.

CONNECTED = Query all connected subscribers. * Not supported since it will cause performance problems.

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_GET_SUBSCRIBER_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_GET_SUBSCRIBER_RETURN_INFO = <NE error code>:<NE error description>

HLR SUBSCRIBER DATA

- Authd

- IMSI

- MSISDN

- NAM

- State

- LOCATION DATA

- PACKET DATA PROTOCOL CONTEXT DATA

- PERMANENT SUBSCRIBER DATA

- SUBSCRIBER DISCONNECTED DURING PRINTOUT

- SUPPLEMENTARY SERVICE DATA

LOCATION DATA

- LMSID

- MSC NUMBER

- MSRN

- RSP

- SGSN NUMBER

- VLR ADDRESS

- MS PURGED IN SGSN

- MS PURGED IN VLR

Page 207: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 193

- MSC-AREA RESTRICTED

PACKET DATA PROTOCOL CONTEXT DATA

- APNID

- EQOSID

- PDPADD

- PDPCH

- PDPID

- PDPTY

- VPAA

PERMANENT SUBSCRIBER DATA

- AMSISDN

- BC

- BS

- SUD

SUPPLEMENTARY SERVICE DATA

- BSG

- FNUM

- SADD

- SS

- STATUS

- TIME

- MCF ACTIVE

- PASSWORD BARRED

A_ERIC-HLR_R12-0_GET_SUBSCRIBER-RBQueries the subscriber rollback. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.getSubscriberRB

Page 208: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

194 Oracle Corporation

Table 152: A_ERIC-HLR_R12-0_GET_SUBSCRIBER-RB

MML commandsHGSDP:MSISDN=<msisdn>,SUDA;

or

HGSDP:IMSI=<imsi>,SUDA;

where

<imsi> = IMSI. Multiple IMSI's maybe specified by separating them with commas.

<msisdn> = MSISDN. Multiple MSISDN's maybe specified by separating them with commas.

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_GET_SUBSCRIBER-RB_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_GET_SUBSCRIBER-RB_RETURN_INFO = <NE error code>:<NE error description>

HLR SUBSCRIBER DATA

- Authd

- IMSI

- MSISDN

Parameter Name Description RangeDefault Value

Type Class

MCLI MCLI S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S O

IMSI IMSI Digit String 6-15 digits. Each digit is 0-9.

S O

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 209: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 195

- NAM

- State

- LOCATION DATA

- PACKET DATA PROTOCOL CONTEXT DATA

- PERMANENT SUBSCRIBER DATA

- SUBSCRIBER DISCONNECTED DURING PRINTOUT

- SUPPLEMENTARY SERVICE DATA

LOCATION DATA

- LMSID

- MSC NUMBER

- MSRN

- RSP

- SGSN NUMBER

- VLR ADDRESS

- MS PURGED IN SGSN

- MS PURGED IN VLR

- MSC-AREA RESTRICTED

PACKET DATA PROTOCOL CONTEXT DATA

- APNID

- EQOSID

- PDPADD

- PDPCH

- PDPID

- PDPTY

- VPAA

PERMANENT SUBSCRIBER DATA

- AMSISDN

- BC

- BS

- SUD

Page 210: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

196 Oracle Corporation

SUPPLEMENTARY SERVICE DATA

- BSG

- FNUM

- SADD

- SS

- STATUS

- TIME

- MCF ACTIVE

- PASSWORD BARRED

A_ERIC-HLR_R12-0_GET_SUBSCRIPTIONQueries the HLR subscription feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.getSubscription.

MML commandsHGSUP:MSISDN=<msisdn>;

or

HGSUP:IMSI=<imsi>;

or

Table 153: A_ERIC-HLR_R12-0_GET_SUBSCRIPTION

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S O

IMSI IMSI. S O

CONNECTED Flag to query on all connected subscribers.

Y/N S O

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 211: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 197

HGSUP:CONNECTED;

where

<imsi> = IMSI. Multiple IMSI's maybe specified by separating them with commas.

<msisdn> = MSISDN. Multiple MSISDN's maybe specified by separating them with commas.

CONNECTED = Query all connected subscribers. * Not supported since it will cause performance problems.

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_GET_SUBSCRIPTION_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_GET_SUBSCRIPTION_RETURN_INFO = <NE error code>:<NE error description>

- AUTHD

- IMSI

- MSISDN

- STATE

A_ERIC-HLR_R12-0_GET_SUBSCRIPTION-RBQueries the HLR subscription rollback. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_r12_0.prov.HLRProvisioning.getSubscriptionRB.

Table 154: A_ERIC-HLR_R12-0_GET_SUBSCRIPTION

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S O

IMSI International Mobile Subscriber Identity.

Digit String 6-15 digits. Each digit is 0-9.

S O

Page 212: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

198 Oracle Corporation

MML commandsHGSDP:MSISDN=<msisdn>,SUDA;

or

HGSDP:IMSI=<imsi>,SUDA;

where

<imsi> = IMSI. Multiple IMSI's maybe specified by separating them with commas.

<msisdn> = MSISDN. Multiple MSISDN's maybe specified by separating them with commas.

SUD_CODE = Based on the value of this parameter the query returns some data which is used by a posterior ASDL in case of rollback of a modification.

PROFILE = Based on the value of this parameter the query returns some data which is used by a posterior ASDL in case of rollback of a modification.

Note:

SUD_CODE and PROFILE are used by query while returning the old data for rollback even these are not part of MML.

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_GET_SUBSCRIPTION-RB_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_GET_SUBSCRIPTION-RB_RETURN_INFO = <NE error code>:<NE error description>

PERMANENT SUBSCRIBER DATA

- <RETURN_DATA_PREFIX>_OLD_SUD_CODE

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

SUD_CODE Subscriber data code S O

PROFILE Profile number Numeral 0 - 255. S O

Table 154: A_ERIC-HLR_R12-0_GET_SUBSCRIPTION

Parameter Name Description RangeDefault Value

Type Class

Page 213: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 199

- <RETURN_DATA_PREFIX>_OLD_SUD_VALUE

- <RETURN_DATA_PREFIX>_OLD_PROFILE

A_ERIC-HLR_R12-0_GET_SUBSCRIBER-ALLDATAQueries the HLR subscriber. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.getSubscriber.

MML commandsHGSDP:MSISDN=<msisdn>,<TYPE_OF_QUERY>;

or

HGSDP:IMSI=<imsi>,<TYPE_OF_QUERY>;

or

HGSDP:CONNECTED,<TYPE_OF_QUERY>;

where

<imsi> = IMSI. Multiple IMSI's maybe specified by separating them with commas.

<msisdn> = MSISDN. Multiple MSISDN's maybe specified by separating them with commas.

<TYPE_OF_QUERY> = Type of query to be executed. Permitted values are ALL,SUDA,SSDA,LOC,PDP.

Table 155: A_ERIC-HLR_R12-0_GET_SUBSCRIBER-ALLDATA

Parameter Name Description RangeDefault Value

Type Class

MCLI S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S O

IMSI International Mobile Subscriber Identity.

Digit String 6-15 digits. Each digit is 0-9.

S O

TYPE_OF_QUERY Flag indicating the type of query to be performed.

Supported values are ALL,SUDA,SSDA,LOC and PDP.

ALL S O

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 214: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

200 Oracle Corporation

CONNECTED = Query all connected subscribers. * Not supported since it will cause performance problems.

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_GET_SUBSCRIBER_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_GET_SUBSCRIBER_RETURN_INFO = <NE error code>:<NE error description>

A_ERIC-HLR_R12-0_GET_IMSI-DEL-DATAQueries the HLR subscriber. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.getIMSIRemoveData.

MML commandsHGSDP:MSISDN=<msisdn>,<TYPE_OF_QUERY>;

or

HGSDP:IMSI=<imsi>,<TYPE_OF_QUERY>;

Table 156: A_ERIC-HLR_R12-0_GET_IMSI-DEL-DATA

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote Network Element Name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S O

IMSI International Mobile Subscriber Identity.

Digit String 6-15 digits. Each digit is 0-9.

S O

TYPE_OF_QUERY Flag indicating the type of query to be performed.

Supported values are ALL,SUDA,SSDA,LOC and PDP.

ALL S O

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 215: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 201

or

HGSDP:CONNECTED,<TYPE_OF_QUERY>;

where

<imsi> = IMSI. Multiple IMSI's maybe specified by separating them with commas.

<msisdn> = MSISDN. Multiple MSISDN's maybe specified by separating them with commas.

<TYPE_OF_QUERY> = Type of query to be executed. Permitted values are ALL,SUDA,SSDA,LOC,PDP. Value ALL set as default.

CONNECTED = Query all connected subscribers. * Not supported since it will cause performance problems.

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_GET_IMSI-DEL-DATA_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_GET_IMSI-DEL-DATA_RETURN_INFO = <NE error code>:<NE error description>

A_ERIC-HLR_R12-0_MODIFY_IMSIInitiates the modification of IMSI of HLR subscriber feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.modifyIMSI.

Table 157: A_ERIC-HLR_R12-0_MODIFY_IMSI

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

IMSI IMSI. S O

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S O

NEW_IMSI New IMSI. S R

DATE Activation date for the new IMSI expressed as: yymmdd

S O

Page 216: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

202 Oracle Corporation

MML commandsHGICI:MSISDN=<msisdn>,NIMSI=<nimsi>>[,DATE=<DATE>];

or

HGICI:IMSI=<imsi>,NIMSI=<nimsi>[,DATE=<DATE>];

where<imsi> = IMSI

<msisdn> = MSISDN

<nimsi> = new IMSI

<DATE> = Date

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MODIFY_IMSI_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MODIFY_IMSI_RETURN_INFO = <NE error code>:<NE error description>

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 157: A_ERIC-HLR_R12-0_MODIFY_IMSI

Parameter Name Description RangeDefault Value

Type Class

Page 217: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 203

A_ERIC-HLR_R12-0_MODIFY_IMSI-CANCELCancels the IMSI changeover before the new IMSI active of HLR subscriber feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.modifyIMSICancel.

MML commandsHGICE:MSISDN=<msisdn>;

or

HGICE:NIMSI=<nimsi>;

where<nimsi> = New IMSI

<msisdn> = MSISDN

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MODIFY_IMSI-CANCEL_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MODIFY_IMSI-CANCEL_RETURN_INFO = <NE error code>:<NE error description>

Table 158: A_ERIC-HLR_R12-0_MODIFY_IMSI-CANCEL

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S O

NEW_IMSI New IMSI. S O

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 218: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

204 Oracle Corporation

A_ERIC-HLR_R12-0_MODIFY_IMSI-CHANGEOVERModifies the changeover date of the IMSI of HLR subscriber feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.modifyIMSIChangeOver.

MML commandsHGICC:MSISDN=<msisdn>[,DATE=<date>];

or

HGICC:NIMSI=<nimsi>[,DATE=<date>];

where<nimsi> = New IMSI

<msisdn> = MSISDN

<date> = Date

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MODIFY_IMSI-CHANGEOVER_UDET = <user defined exit type>

Return as info parameters :

Table 159: A_ERIC-HLR_R12-0_MODIFY_IMSI-CHANGEOVER

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S O

NEW_IMSI New IMSI. S O

DATE Activation date for the new IMSI expressed as: yymmdd.

S O

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 219: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 205

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MODIFY_IMSI-CHANGEOVER_RETURN_INFO = <NE error code>:<NE error description>

A_ERIC-HLR_R12-0_MODIFY_IMSI-DEL-DATARemoves the old data associated with the old IMSI of HLR subscriber feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.modifyIMSIRemoveData

MML commandsHGIRI:MSISDN=<msisdn>;

Or

HGIRI:IMSI=<imsi>;

where<imsi> = IMSI

<msisdn> = MSISDN

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MODIFY_IMSI-DEL-DATA_UDET = <user defined exit type>

Return as info parameters :

Table 160: A_ERIC-HLR_R12-0_MODIFY_IMSI-DEL-DATA

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

IMSI IMSI S O

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S O

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 220: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

206 Oracle Corporation

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MODIFY_IMSI-DEL-DATA_RETURN_INFO = <NE error code>:<NE error description>

A_ERIC-HLR_R12-0_MODIFY_IMSI-DEL-DATA-RBRollback functionality to remove the old data associated with the old IMSI of HLR subscriber feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_r12_0.prov.HLRProvisioning.modifyIMSIRemoveDataRB

MML commandsHGIRI:MSISDN=<msisdn>;

or

HGIRI:IMSI=<imsi>;

Where

<imsi> = OLD_IMSI.

<msisdn> = OLD_MSISDN.

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MODIFY_IMSI-DEL-DATA-RB_UDET = <user defined exit type>

Table 161: A_ERIC-HLR_R12-0_MODIFY_IMSI-DEL-DATA-RB

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

OLD_IMSI International Mobile Subscriber Identity

Digit String 6-15 digits. Each digit is 0-9.

S O

OLD_MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S O

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 221: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 207

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MODIFY_IMSI-DEL-DATA-RB_RETURN_INFO = <NE error code>:<NE error description>

A_ERIC-HLR_R12-0_MODIFY_LOC-SERVICESModify Location Services. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_r12_0.prov.HLRProvisioning.modLocServices.

Table 162: A_ERIC-HLR_R12-0_MODIFY_LOC-SERVICES

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote Network Element name

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

CREL Call Related location services privacy class.

Only valid values are YES or NO.

S O

CUNRL Call Unrelated location services privacy class.

Only valid values are YES or NO.

S O

SERVT Public Land Mobile Network (PLMN) operator LCS privacy class Service type.

The valid values are a list from 0 to 127.

S O

EADD External location services client Address. Defined as E.164 number.

The value must be of length 3 to 15 digits.

S O

GRES Restriction on the Gateway Mobile Location Center (GMLC).

Valid values are 0 - only GMLCs defined in subscriber GMLC address list, 1 - any GMLC in the home country.

S O

Page 222: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

208 Oracle Corporation

MML commandsHGLDC:MSISDN=<msisdn>,CREL[,NOTF=<notf>]; or HGLDC:MSISDN=<msisdn>,CUNRL[,NOTF=<notf>]; or HGLDC:MSISDN=<msisdn>,SERVT=<servt>[,GRES=<gres>][,NOTF=<notf>]; or HGLDC:MSISDN=<msisdn>,EADD=<eadd>[,GRES=<gres>][,NOTF=<notf>][,EADD_CREL]; or HGLDC:MSISDN=<msisdn>,EADD=<eadd>[,GRES=<gres>][,NOTF=<notf>][,EADD_CUNRL];

Where

<msisdn> = MSISDN.

CREL = Call related Location services privacy class.

CUNRL = Call Unrelated location services privacy class.

<servt> = Service Type.

<eadd> = External location services client Address.

<notf> = Location request restriction related to the notification to the mobile subscriber.

<gres> = Restriction on the Gateway Mobile Location Center.

NOTF Location request restriction related to the notification to the mobile subscriber.

Valid values are 0-location request allowed without notification,1- location request with notification,2-location request with notification and privacy verification allowed,3-location request with notification and privacy verification restricted

S O

EADD_CREL Call Related location services privacy class.

Only valid values are YES or NO.

S O

EADD_CUNRL Call Unrelated location services privacy class.

Only valid values are YES or NO.

S O

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 162: A_ERIC-HLR_R12-0_MODIFY_LOC-SERVICES

Parameter Name Description RangeDefault Value

Type Class

Page 223: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 209

Note: At least one of the optional parameters is needed.

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MODIFY_LOC-SERVICES_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MODIFY_LOC-SERVICES_RETURN_INFO = <NE error code>:<NE error description>

A_ERIC-HLR_R12-0_MODIFY_MULTIPLE-SUBSCRIPTIONModify multiple subscription data. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_r12_0.prov.HLRProvisioning.modifyMultipleSubscription.

Table 163: A_ERIC-HLR_R12-0_MODIFY_MULTIPLE-SUBSCRIPTION

Parameter Name Description RangeDefault Value

Type Class

IMSI International Mobile Subscriber Identity.

S O

MCH Multiple subscription activation mechanism.

S O

MCLI Remote Network Element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

ACIMSI Active International Mobile Subscriber Identity.

S O

MMSISDN Master Mobile Station ISDN Number.

S O

ERASE Erase Indicator. S O

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes.

S O

Page 224: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

210 Oracle Corporation

MML commandsHGMSC:MSISDN=<msisdn>,IMSI=<imsi>; or HGMSC:MSISDN=<msisdn>,IMSI=<imsi>,ERASE; or HGMSC:MSISDN=<msisdn>,MCH=<mch>; or HGMSC:MSISDN=<msisdn>,ACIMSI=<acimsi>; or HGMSC:MSISDN=<msisdn>,MMSISDN=<mmsisdn>;

Where

<imsi> = IMSI.

<msisdn> = MSISDN.

<mch> = Multiple subscription activation mechanism.

<acimsi> = Active IMSI.

<mmsisdn> = Master MSISDN.

ERASE = Erase indicator.

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MODIFY_MULTIPLE-SUBSCRIPTION_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MODIFY_MULTIPLE-SUBSCRIPTION_RETURN_INFO = <NE error code>:<NE error description>

A_ERIC-HLR_R12-0_MODIFY_SUBSCRIPTIONModifies the GSM HLR subscription with a profile feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.modifySubscription.

Table 164: A_ERIC-HLR_R12-0_MODIFY_SUBSCRIPTION

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

SUD_CODE Subscriber data code. S O

SUD_VALUE Subscriber data value. S O

Page 225: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 211

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<sud_code>-<sud_value>;

or

HGSDC:MSISDN=<msisdn>,PROFILE=<profile>;

Where

<msisdn> = MSISDN.

<sud_code> = Subscriber Data Code.

<sud_value> = Subscriber Data Value.

<profile> = Profile number.

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MODIFY_SUBSCRIPTION_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MODIFY_SUBSCRIPTION_RETURN_INFO = <NE error code>:<NE error description>

PROFILE Profile number Numeral 0 - 255. S O

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 164: A_ERIC-HLR_R12-0_MODIFY_SUBSCRIPTION

Parameter Name Description RangeDefault Value

Type Class

Page 226: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

212 Oracle Corporation

A_ERIC-HLR_R12-0_MODIFY_SUBSCRIPTION-RBRolls back the modification made to GSM HLR subscription with a profile feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.modifySubscriptionRB.

Table 165: A_ERIC-HLR_R12-0_MODIFY_SUBSCRIPTION-RB

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

OLD_PROFILE Old profile number. S R

OLD_SUD_CODE Old subscriber data code.

S O

OLD_SUD_VALUE Old subscriber data value.

S O

FEATURES Multiple features to be added using MML optimization. Consists of: FEATURES[i].MSISDN,FEATURES[i].SUD_CODE,FEATURES[i].BSG,FEATURES[i].FNUM,FEATURES[i].OFA,FEATURES[i].TIME,FEATURES[i].SADD where i is any number.

C N

SUD Multiple features to be modified using MML optimization for subscriber data.Consists of SUD[i].CODE,SUD[i].VALUE where i is any number.

C N

Page 227: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 213

MML commandsHGSDC:MSISDN=<msisdn>,PROFILE=<profile>;

or

HGSDC:MSISDN=<msisdn>,SUD=<sud_code>-<sud_value>;

Where

<imsi> = IMSI.

<msisdn> = MSISDN.

<profile> = Profile number.

<sud_code> = Subscriber Data Code.

<sud_value> = Subscriber Data Value.

Output

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MODIFY_SUBSCRIPTION-RB_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MODIFY_SUBSCRIPTION-RB_RETURN_INFO = <NE error code>:<NE error description>

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 165: A_ERIC-HLR_R12-0_MODIFY_SUBSCRIPTION-RB

Parameter Name Description RangeDefault Value

Type Class

Page 228: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

214 Oracle Corporation

A_ERIC-HLR_R12-0_MOD_ACCModifies the account code feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.modACC.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = ACC

<command_value> = 0 to 2

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_ACC_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_ACC_RETURN_INFO = <NE error code>:<NE error description>

Table 166: A_ERIC-HLR_R12-0_MOD_ACC

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

SUD_VALUE Subscriber data value. 0 - 2 S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 229: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 215

A_ERIC-HLR_R12-0_MOD_ACC-RBRolls back the modification made to account code feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.modACCRB.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = ACC

<command_value> = 0 to 2

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_ACC-RB_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_ACC-RB_RETURN_INFO = <NE error code>:<NE error description>

Table 167: A_ERIC-HLR_R12-0_MOD_ACC-RB

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

OLD_SUD_VALUE Old subscriber data value.

0 - 2 S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 230: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

216 Oracle Corporation

A_ERIC-HLR_R12-0_MOD_AOCModifies the advice of charge feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.modAOC.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = AOC

<command_value> = 0 to 2

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_AOC_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_AOC_RETURN_INFO = <NE error code>:<NE error description>

Table 168: A_ERIC-HLR_R12-0_MOD_AOC

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

SUD_VALUE Subscriber data value. 0 - 2 S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 231: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 217

A_ERIC-HLR_R12-0_MOD_AOC-RBRolls back the modification made to advice of charge feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.modAOCRB.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = AOC

<command_value> = 0 to 2

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_AOC-RB_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_AOC-RB_RETURN_INFO = <NE error code>:<NE error description>

Table 169: A_ERIC-HLR_R12-0_MOD_AOC-RB

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

OLD_SUD_VALUE Old subscriber data value.

0 - 2 S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 232: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

218 Oracle Corporation

A_ERIC-HLR_R12-0_MOD_BS2FModifies the fall-back asynchronous bearer service feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.modBS2F.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = BS2F

<command_value> = 0 to 5

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_BS2F_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_BS2F_RETURN_INFO = <NE error code>:<NE error description>

Table 170: A_ERIC-HLR_R12-0_MOD_BS2F

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

SUD_VALUE Subscriber data value. 0 - 5 S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 233: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 219

A_ERIC-HLR_R12-0_MOD_BS2F-RBRolls back the modification made to fall-back asynchronous bearer service feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.modBS2FRB.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = BS2F

<command_value> = 0 to 5

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_BS2F-RB_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_BS2F-RB_RETURN_INFO = <NE error code>:<NE error description>

Table 171: A_ERIC-HLR_R12-0_MOD_BS2F-RB

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

OLD_SUD_VALUE Old subscriber data value.

0 - 5 S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 234: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

220 Oracle Corporation

A_ERIC-HLR_R12-0_MOD_BS3FModifies the fall-back synchronous bearer service feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.modBS3F.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = BS3F

<command_value> = 0 to 4

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_BS3F_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_BS3F_RETURN_INFO = <NE error code>:<NE error description>

Table 172: A_ERIC-HLR_R12-0_MOD_BS3F

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

SUD_VALUE Subscriber data value. 0 - 4 S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 235: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 221

A_ERIC-HLR_R12-0_MOD_BS3F-RBRolls back the modification made to fall-back synchronous bearer service feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.modBS3FRB.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = BS3F

<command_value> = 0 to 4

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_BS3F-RB_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_BS3F-RB_RETURN_INFO = <NE error code>:<NE error description>

Table 173: A_ERIC-HLR_R12-0_MOD_BS3F-RB

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

OLD_SUD_VALUE Old subscriber data value.

0 - 4 S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 236: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

222 Oracle Corporation

A_ERIC-HLR_R12-0_MOD_CAMELModifies the camel services feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.modCAMEL.

Table 174: A_ERIC-HLR_R12-0_MOD_CAMEL

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S O

CSP CAMEL subscription profile.

1 - 255 S O

MMTDP Mobility management CAMEL subscription data trigger detection point.

This parameter application system dependent parameter and Valid values are YES or NO.If user give YES MML will modify the service data.

S O

DSTDP Dialled service CAMEL subscription data trigger detection point.

1 - 10 S O

TSMSTDP Terminating SMS CAMEL subscription data trigger detection point.

Valid value is 2.(2-SMS Delivery Request).

S O

OSMSTDP Originating SMS trigger detection point.

Valid value is 1.(1-SMS collected info).

S O

Page 237: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 223

GPRSTDP GPRS CAMEL trigger detection point.

Valid values are 1,2,11,12,14. (1-Attach,2-Change of position GPRS session,11-Packet Data Protocol (PDP) context establishment,12-PDP context establishment acknowledgment,14-Change of position context)

S O

OCTDP Originating CAMEL subscription data trigger detection point.

Valid values are 2,4.(2-Collected info,4-Route select failure).

S O

TCTDP Terminating CAMEL subscription data trigger detection point.

Valid values are 12,13,14.(12-Terminating attempt authorized,13-Terminator busy,14-Terminator no answer).

S O

VTTDP Visited mobile switching centre terminating trigger detection point.

Valid values are 12,13,14.(12-Terminating attempt authorized,13-Terminator busy,14-Terminator no answer).

S O

GSA GSM service control function address.

Defined as international E.164 number.

Defined as internation E.164 number. Range is digit string 3-15 digits.

S O

SK Service key. Range is from 0 to 2147483647.

S O

Table 174: A_ERIC-HLR_R12-0_MOD_CAMEL

Parameter Name Description RangeDefault Value

Type Class

Page 238: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

224 Oracle Corporation

MML commandsIf (Optional parameter MSISDN provided) THEN

{

HGCMC:MSISDN=<msisdn>,MMTDP[,SK=<sk>][,GSA=<gsa>][,CCH=<cch>];

or

HGCMC:MSISDN=<msisdn>,DSTDP=<dstdp>[,SK=<sk>][,GSA=<gsa>][,DEH=<deh>][,CCH=<cch>];

or

DEH Default error handling. Valid values are 0 - Call released in case of errror in GSM service control function to GSM or GPRS, 1 - Call continued in case of errror in GSM service control function to GSM or GPRS.

S O

I Inhibitor indicator. Valid values are Y - Terminating trigger detection point will not be sent to the Gateway Mobile Services Switch Center and N -Terminating trigger detection point will always be sent to the Gateway Mobile Services Switch Center.

S O

CCH CAMEL capability handling.

Range is 1,2,3 or 4.(1-CAMEL phase 1;2-CAMEL phase 2;3-CAMEL phase 3;4-CAMEL phase 4;)

S O

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 174: A_ERIC-HLR_R12-0_MOD_CAMEL

Parameter Name Description RangeDefault Value

Type Class

Page 239: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 225

HGCMC:MSISDN=<msisdn>,TCTDP=<tctdp>[,SK=<sk>][,GSA=<gsa>][,DEH=<deh>][,I=<i>][,CCH=<cch>];

or

HGCMC:MSISDN=<msisdn>,VTTDP=<vttdp>[,SK=<sk>][,GSA=<gsa>][,DEH=<deh>][,CCH=<cch>];

or

HGCMC:MSISDN=<msisdn>,TSMSTDP=<tsmstdp>[,SK=<sk>][,GSA=<gsa>][,DEH=<deh>][,CCH=<cch>];

or

HGCMC:MSISDN=<msisdn>,OSMSTDP=<osmstdp>[,SK=<sk>][,GSA=<gsa>][,DEH=<deh>][,CCH=<cch>];

or

HGCMC:MSISDN=<msisdn>,GPRSTDP=<gprstdp>[,SK=<sk>][,GSA=<gsa>][,DEH=<deh>][,CCH=<cch>];

or

HGCMC:MSISDN=<msisdn>,OCTDP=<octdp>[,SK=<sk>][,GSA=<gsa>][,DEH=<deh>][,CCH=<cch>];

}

else If(Optional Parameter CSP Provided) THEN

{

HGCMC:CSP=<csp>,MMTDP[,SK=<sk>][,GSA=<gsa>][,CCH=<cch>];

or

HGCMC:CSP=<csp>,DSTDP=<dstdp>[,SK=<sk>][,GSA=<gsa>][,DEH=<deh>][,CCH=<cch>];

or

HGCMC:CSP=<csp>,TSMSTDP=<tsmstdp>[,SK=<sk>][,GSA=<gsa>][,DEH=<deh>][,CCH=<cch>];

or

HGCMC:CSP=<csp>,OSMSTDP=<osmstdp>[,SK=<sk>][,GSA=<gsa>][,DEH=<deh>][,CCH=<cch>];

or

HGCMC:CSP=<csp>,GPRSTDP=<gprstdp>[,SK=<sk>][,GSA=<gsa>][,DEH=<deh>][,CCH=<cch>];

or

HGCMC:CSP=<csp>,OCTDP=<octdp>[,SK=<sk>][,GSA=<gsa>][,DEH=<deh>][,CCH=<cch>];

or

HGCMC:CSP=<csp>,TCTDP=<tcpdp>[,SK=<sk>][,GSA=<gsa>][,DEH=<deh>][,I][,CCH=<cch>];

or

HGCMC:CSP=<csp>,VTTDP=<vttdp>[,SK=<sk>][,GSA=<gsa>][,DEH=<deh>][,CCH=<cch>];

Page 240: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

226 Oracle Corporation

}

Where

<msisdn> = MSISDN.

<csp> = CAMEL subscription profile.

<mmtdp> = Mobility Management CAMEL Subscription Data Trigger Detection Point.

<dstdp> = Dialled service CAMEL Subscription Data Trigger Detection Point.

<tsmstdp> = Terminating SMS CAMEL Subscription Data Trigger Detection Point.

<osmstdp> = Originating SMS Trigger Detection Point.

<gprstdp> = GPRS CAMEL Trigger Detection Point.

<octdp> = Originating CAMEL Subscription Data Trigger Detection Point.

<tctdp> = Terminating CAMEL Subscription Data Trigger Detection Point.

<vttdp> = Visited Mobile Switching Centre terminating Trigger Detection Point.

<sk> = Service Key.

<gsa> = GSM service control function address.

<deh> = Default Error Handling.

<cch> = CAMEL Capability Handling.

<i> = Inhibitor Indicator.

Note:1 User should provide either MSISDN or CSP parameter even these parameters are optional.

Note:2 Addition of DSTDP, TSMSTDP and VTTDP is not currently supported by the model switch at Telstra. Hence the modification of these

parameters is not supported either. These features could be required in a further enhancement

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_CAMEL_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_CAMEL_RETURN_INFO = <NE error code>:<NE error description>

Page 241: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 227

A_ERIC-HLR_R12-0_MOD_CAMEL-EXTENDEDModifies the camel extended features. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.modCAMELExtended.

Table 175: A_ERIC-HLR_R12-0_MOD_CAMEL-EXTENDED

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S O

CSP CAMEL subscription profile.

1 - 255 S O

SSLO Subscriber state and location information sending CAMEL subscription option.

0 - Subscriber state and location information are not sent at Send Routing Information MAP version 3 response1 - Subscriber state and location information are sent at Send Routing Information MAP version 3 response

S O

GCSO GMSC/gsmSCF CAMEL phase 1 support subscription option.

0 - Allow call terminating handling without CAMEL invocation 1 - Apply ODB of all incoming calls

S O

Page 242: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

228 Oracle Corporation

MC3SO Mobile Switching Centre (MSC) / Visitor Location Register (VLR) CAMEL phase 3 denied subscription option.

Valid values are from 0 to 2.(0-Allow mobile subscriber's registration in the Serving GPRS Support Node (SGSN) without sending GPRS CAMEL phase 3 data when CAMEL phase 3 data is not allowed to be sent to the SGSN;1-Deny mobile subscriber's registration in the SGSN when CAMEL phase 3 data is not allowed to be sent to the SGSN)

S O

Table 175: A_ERIC-HLR_R12-0_MOD_CAMEL-EXTENDED

Parameter Name Description RangeDefault Value

Type Class

Page 243: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 229

MC2SO MSC/VLR CAMEL phase 2 denied subscription option.

Valid values are from 0 to 2.(0 Check if mobile subscriber's registration in the serving MSC/VLR with CAMEL phase 1 data can be performed or register without CAMEL data when CAMEL phase 2 data is not allowed to be sent to the MSC/VLR 1 Network induced activation of supplementary service Barring of All Outgoing Calls (BAOC) performed when CAMEL phase 2 data is not allowed to be sent to the serving MSC/VLR 2 Deny mobile subscriber's registration in the serving MSC/VLR when CAMEL phase 2 data is not allowed to be sent to the MSC/VLR)

S O

Table 175: A_ERIC-HLR_R12-0_MOD_CAMEL-EXTENDED

Parameter Name Description RangeDefault Value

Type Class

Page 244: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

230 Oracle Corporation

MCSO MSC/VLR CAMEL phase 1 denied subscription option.

Valid values are from 0 to 2.(0-Allow mobile subscriber's registration in the serving MSC/VLR without sending CAMEL data when CAMEL phase 1 data is not allowed to be sent to the MSC/VLR;1-Network induced activation of supplementary service BAOC performed when CAMEL phase 1 data is not allowed to be sent to the serving MSC/VLR;2-Deny mobile subscriber's registration in the serving MSC/VLR when CAMEL phase 1 data is not allowed to be sent to the MSC/VLR)

S O

GC2SO GMSC/gsmSCF CAMEL phase 2 support subscription option.

Valid values are 0 and 1.(0-Allow call terminating handling with CAMEL phase 1 invocation when CAMEL phase 2 is not supported in the interrogating GMSC/gsmSCF;1-Apply Operator Determined Barring (ODB) of all incoming calls when CAMEL phase 2 is not supported in the interrogating GMSC/gsmSCF).

S O

Table 175: A_ERIC-HLR_R12-0_MOD_CAMEL-EXTENDED

Parameter Name Description RangeDefault Value

Type Class

Page 245: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 231

GC3SO Gateway Mobile Switching Centre (GMSC)/Global System for Mobile Communication Service Control Function(gsmSCF) CAMEL phase 3 support subscription option.

Valid values are 0 and 1.(0-Allow call terminating handling with CAMEL phase 1 invocation when CAMEL phase 2 is not supported in the interrogating GMSC/gsmSCF;1-Apply Operator Determined Barring (ODB) of all incoming calls when CAMEL phase 2 is not supported in the interrogating GMSC/gsmSCF).

S O

TIF Translation information flag.

Valid values are 0 and 1.(0-Number length, format and conditional barring checks are performed, when the mobile subscriber or the service provider registers a forwarded-to number;1-Number length, format and conditional barring checks are not performed, when the mobile subscriber or the service provider registers a forwarded-to number)

S O

Table 175: A_ERIC-HLR_R12-0_MOD_CAMEL-EXTENDED

Parameter Name Description RangeDefault Value

Type Class

Page 246: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

232 Oracle Corporation

GPRSSO General Packet Radio Service (GPRS) CAMEL phase 3 denied subscription option.

Valid values are 0 and 1.(0-Allow mobile subscriber's registration in the Serving GPRS Support Node (SGSN) without sending GPRS CAMEL phase 3 data when CAMEL phase 3 data is not allowed to be sent to the SGSN;1-Deny mobile subscriber's registration in the SGSN when CAMEL phase 3 data is not allowed to be sent to the SGSN)

S O

Table 175: A_ERIC-HLR_R12-0_MOD_CAMEL-EXTENDED

Parameter Name Description RangeDefault Value

Type Class

Page 247: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 233

OSMSSO Originating Short Message Service (SMS) CAMEL phase 3 denied subscription option.

Valid values are from 0 to 2.(0-Allow mobile subscriber's registration in the serving node (MSC/VLR or SGSN or both) without sending originating SMS CAMEL phase 3 data when CAMEL phase 3 data is not allowed to be sent to the MSC/VLR or SGSN;1-Network induced service withdrawal of Teleservice Short Message MO/PP (TS22) performed when CAMEL phase 3 data is not allowed to be sent to the MSC/VLR or SGSN;2-Deny mobile subscriber's registration in the serving node (MSC/VLR or SGSN or both) when CAMEL phase 3 data is not allowed to be sent to the MSC/VLR or SGSN)

S O

Table 175: A_ERIC-HLR_R12-0_MOD_CAMEL-EXTENDED

Parameter Name Description RangeDefault Value

Type Class

Page 248: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

234 Oracle Corporation

TSMSSO Terminating SMS CAMEL phase 4 denied subscription option.

Valid values are from 0 to 2.(0-Allow mobile subscriber's registration in the serving node (MSC/VLR or SGSN or both) without sending terminating SMS CAMEL phase 4 data when terminating SMS CAMEL phase 4 data is not allowed to be sent to the MSC/VLR or SGSN or both;1-Allow mobile subscriber's registration in the serving node (MSC/VLR or SGSN or both) without sending terminating SMS CAMEL phase 4 data, when terminating SMS CAMEL phase 4 data is not allowed to be sent to the MSC/VLR or SGSN or both. Network induced service invocation of an incoming call barring service is applied to mobile terminating short message delivery via MSC or SGSN or both;2-Deny mobile subscriber's registration in the serving node (MSC/VLR or SGSN or both) when terminating SMS CAMEL phase 4 data is not allowed to be sent to the MSC/VLR or SGSN or both)

S O

Table 175: A_ERIC-HLR_R12-0_MOD_CAMEL-EXTENDED

Parameter Name Description RangeDefault Value

Type Class

Page 249: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 235

MMSO Mobility management CAMEL phase 3 denied subscription option.

Valid values are 0 to 1.(0-Allow mobile subscriber's registration in the serving MSC/VLR without sending mobility management CAMEL phase 3 data when CAMEL phase 3 data is not allowed to be sent to the MSC/VLR 1-Deny mobile subscriber's registration in the serving MSC/VLR when CAMEL phase 3 data is not allowed to be sent to the MSC/VLR )

S O

ETINCI Extended terminating intelligent network capability indicator.

0 - 255 S O

ETICK Extended terminating intelligent network category key.

0 - 999 S O

EOINCI Extended originating intelligent network capability indicator.

0 - 255 S O

EOICK Extended originating intelligent network category key.

0 - 999 S O

Table 175: A_ERIC-HLR_R12-0_MOD_CAMEL-EXTENDED

Parameter Name Description RangeDefault Value

Type Class

Page 250: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

236 Oracle Corporation

MML commandsIf (Optional parameter MSISDN provided) THEN

{

MC4SO Mobile Switching Centre (MSC) / Visitor Location Register (VLR) CAMEL phase 4 denied subscription option.

Valid values are from 0 to 2.(0-Check if mobile subscriber's registration in the serving MSC/VLR with lower CAMEL phase data can be performed or register without CAMEL data when CAMEL phase 4 data is not allowed to be sent to the MSC/VLR;1-Network induced activation of supplementary service BAOC performed when CAMEL phase 4 data is not allowed to be sent to the serving MSC/VLR,For visited MSC terminating CAMEL trigger detection point, value 1 means the same as value 0;2-Deny mobile subscriber's registration in the serving MSC/VLR when CAMEL phase 4 data is not allowed to be sent to the MSC/VLR)

S O

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 175: A_ERIC-HLR_R12-0_MOD_CAMEL-EXTENDED

Parameter Name Description RangeDefault Value

Type Class

Page 251: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 237

HGCEC:MSISDN=<msisdn>[,SSLO=<sslo>][,GCSO=<gcso>][,MC4SO=<mc4so>][,GC2SO=<gc2so>][,GC3SO=<gc3so>][,TIF=<tif>][,GPRSSO=<gprsso>][,OSMSSO=<osmsso>][,TSMSSO=<tsmsso>][,MMSO=<mmso>][,ETINCI=<etinci>][,EOINCI=<eoinci>];

orHGCEC:MSISDN=<msisdn>[,SSLO=<sslo>][,GCSO=<gcso>][,MC3SO=<mc3so>][,GC2SO=<gc2so>][,GC3SO=<gc3so>][,TIF=<tif>][,GPRSSO=<gprsso>][,OSMSSO=<osmsso>][,TSMSSO=<tsmsso>][,MMSO=<mmso>][,ETINCI=<etinci>][,EOINCI=<eoinci>];or HGCEC:MSISDN=<msisdn>[,SSLO=<sslo>][,GCSO=<gcso>][,MC2SO=<mc2so>][,GC2SO=<gc2so>][,GC3SO=<gc3so>][,TIF=<tif>][,GPRSSO=<gprsso>][,OSMSSO=<osmsso>][,TSMSSO=<tsmsso>][,MMSO=<mmso>][,ETINCI=<etinci>][,EOINCI=<eoinci>];or HGCEC:MSISDN=<msisdn>[,SSLO=<sslo>][,GCSO=<gcso>][,MCSO=<mcso>][,GC2SO=<gc2so>][,GC3SO=<gc3so>][,TIF=<tif>][,GPRSSO=<gprsso>][,OSMSSO=<osmsso>][,TSMSSO=<tsmsso>][,MMSO=<mmso>][,ETINCI=<etinci>][,EOINCI=<eoinci>];or HGCEC:MSISDN=<msisdn>[,SSLO=<sslo>][,GCSO=<gcso>][,MC4SO=<mc4so>][,GC2SO=<gc2so>][,GC3SO=<gc3so>][,TIF=<tif>][,GPRSSO=<gprsso>][,OSMSSO=<osmsso>][,TSMSSO=<tsmsso>][,MMSO=<mmso>][,ETICK=<etick>][,EOINCI=<eoinci>];orHGCEC:MSISDN=<msisdn>[,SSLO=<sslo>][,GCSO=<gcso>][,MC3SO=<mc3so>][,GC2SO=<gc2so>][,GC3SO=<gc3so>][,TIF=<tif>][,GPRSSO=<gprsso>][,OSMSSO=<osmsso>][,TSMSSO=<tsmsso>][,MMSO=<mmso>][,ETICK=<etick>][,EOINCI=<eoinci>];or HGCEC:MSISDN=<msisdn>[,SSLO=<sslo>][,GCSO=<gcso>][,MC2SO=<mc2so>][,GC2SO=<gc2so>][,GC3SO=<gc3so>][,TIF=<tif>][,GPRSSO=<gprsso>][,OSMSSO=<osmsso>][,TSMSSO=<tsmsso>][,MMSO=<mmso>][,ETICK=<etick>][,EOINCI=<eoinci>];or HGCEC:MSISDN=<msisdn>[,SSLO=<sslo>][,GCSO=<gcso>][,MCSO=<mcso>][,GC2SO=<gc2so>][,GC3SO=<gc3so>][,TIF=<tif>][,GPRSSO=<gprsso>][,OSMSSO=<osmsso>][,TSMSSO=<tsmsso>][,MMSO=<mmso>][,ETICK=<etick>][,EOINCI=<eoinci>];or HGCEC:MSISDN=<msisdn>[,SSLO=<sslo>][,GCSO=<gcso>][,MC4SO=<mc4so>][,GC2SO=<gc2so>][,GC3SO=<gc3so>][,TIF=<tif>][,GPRSSO=<gprsso>][,OSMSSO=<osmsso>][,TSMSSO=<tsmsso>][,MMSO=<mmso>][,ETINCI=<etinci>][,EOICK=<eoick>];orHGCEC:MSISDN=<msisdn>[,SSLO=<sslo>][,GCSO=<gcso>][,MC3SO=<mc3so>][,GC2SO=<gc2so>][,GC3SO=<gc3so>][,TIF=<tif>][,GPRSSO=<gprsso>][,OSMSSO=<osmsso>][,TSMSSO=<tsmsso>][,MMSO=<mmso>][,ETINCI=<etinci>][,EOICK=<eoick>];or HGCEC:MSISDN=<msisdn>[,SSLO=<sslo>][,GCSO=<gcso>][,MC2SO=<mc2so>][,GC2SO=<gc2so>][,GC3SO=<gc3so>][,TIF=<tif>][,GPRSSO=<gprsso>][,OSMSSO=<osmsso>][,TSMSSO=<tsmsso>][,MMSO=<mmso>][,ETINCI=<etinci>][, EOICK=<eoick>];or HGCEC:MSISDN=<msisdn>[,SSLO=<sslo>][,GCSO=<gcso>][,MCSO=<mcso>][,GC2SO=<gc2so>][,GC3SO=<gc3so>][,TIF=<tif>][,GPRSSO=<gprsso>][,OSMSSO=<osmsso>][,TSMSSO=<tsmsso>][,MMSO=<mmso>][,ETINCI=<etinci>][, EOICK=<eoick >];or HGCEC:MSISDN=<msisdn>[,SSLO=<sslo>][,GCSO=<gcso>][,MC4SO=<mc3so>][,GC2SO=<gc2so>][,GC3SO=<gc3so>][,TIF=<tif>][,GPRSSO=<gprsso>][,OSMSSO=<osmsso>][,TSMSSO=<tsmsso>][,MMSO=<mmso>][,ETICK=<etick>][, EOICK=<eoick >];or

Page 252: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

238 Oracle Corporation

HGCEC:MSISDN=<msisdn>[,SSLO=<sslo>][,GCSO=<gcso>][,MC3SO=<mc3so>][,GC2SO=<gc2so>][,GC3SO=<gc3so>][,TIF=<tif>][,GPRSSO=<gprsso>][,OSMSSO=<osmsso>][,TSMSSO=<tsmsso>][,MMSO=<mmso>][,ETICK=<etick>][, EOICK=<eoick >];or HGCEC:MSISDN=<msisdn>[,SSLO=<sslo>][,GCSO=<gcso>][,MC2SO=<mc2so>][,GC2SO=<gc2so>][,GC3SO=<gc3so>][,TIF=<tif>][,GPRSSO=<gprsso>][,OSMSSO=<osmsso>][,TSMSSO=<tsmsso>][,MMSO=<mmso>][,ETICK=<etick>][, EOICK=<eoick >];or HGCEC:MSISDN=<msisdn>[,SSLO=<sslo>][,GCSO=<gcso>][,MCSO=<mcso>][,GC2SO=<gc2so>][,GC3SO=<gc3so>][,TIF=<tif>][,GPRSSO=<gprsso>][,OSMSSO=<osmsso>][,TSMSSO=<tsmsso>][,MMSO=<mmso>][,ETICK=<etick>][, EOICK=<eoick >];}else If(Optional Parameter CSP Provided) THEN{HGCEC:CSP=<csp>[,SSLO=<sslo>][,GCSO=<gcso>][,MC4SO=<mc3so>][,GC2SO=<gc2so>][,GC3SO=<gc3so>][,TIF=<tif>][,GPRSSO=<gprsso>][,OSMSSO=<osmsso>][,TSMSSO=<tsmsso>][,MMSO=<mmso>][,ETINCI=<etinci>][,EOINCI=<eoinci>];orHGCEC:CSP=<csp>[,SSLO=<sslo>][,GCSO=<gcso>][,MC3SO=<mc3so>][,GC2SO=<gc2so>][,GC3SO=<gc3so>][,TIF=<tif>][,GPRSSO=<gprsso>][,OSMSSO=<osmsso>][,TSMSSO=<tsmsso>][,MMSO=<mmso>][,ETINCI=<etinci>][,EOINCI=<eoinci>];or HGCEC:CSP=<csp>[,SSLO=<sslo>][,GCSO=<gcso>][,MC2SO=<mc2so>][,GC2SO=<gc2so>][,GC3SO=<gc3so>][,TIF=<tif>][,GPRSSO=<gprsso>][,OSMSSO=<osmsso>][,TSMSSO=<tsmsso>][,MMSO=<mmso>][,ETINCI=<etinci>][,EOINCI=<eoinci>];or HGCEC:CSP=<csp>[,SSLO=<sslo>][,GCSO=<gcso>][,MCSO=<mcso>][,GC2SO=<gc2so>][,GC3SO=<gc3so>][,TIF=<tif>][,GPRSSO=<gprsso>][,OSMSSO=<osmsso>][,TSMSSO=<tsmsso>][,MMSO=<mmso>][,ETINCI=<etinci>][,EOINCI=<eoinci>];or HGCEC:CSP=<csp>[,SSLO=<sslo>][,GCSO=<gcso>][,MC4SO=<mc3so>][,GC2SO=<gc2so>][,GC3SO=<gc3so>][,TIF=<tif>][,GPRSSO=<gprsso>][,OSMSSO=<osmsso>][,TSMSSO=<tsmsso>][,MMSO=<mmso>][,ETICK=<etick>][,EOINCI=<eoinci>];orHGCEC:CSP=<csp>[,SSLO=<sslo>][,GCSO=<gcso>][,MC3SO=<mc3so>][,GC2SO=<gc2so>][,GC3SO=<gc3so>][,TIF=<tif>][,GPRSSO=<gprsso>][,OSMSSO=<osmsso>][,TSMSSO=<tsmsso>][,MMSO=<mmso>][,ETICK=<etick>][,EOINCI=<eoinci>];or HGCEC:CSP=<csp>[,SSLO=<sslo>][,GCSO=<gcso>][,MC2SO=<mc2so>][,GC2SO=<gc2so>][,GC3SO=<gc3so>][,TIF=<tif>][,GPRSSO=<gprsso>][,OSMSSO=<osmsso>][,TSMSSO=<tsmsso>][,MMSO=<mmso>][,ETICK=<etick>][,EOINCI=<eoinci>];or HGCEC:CSP=<csp>[,SSLO=<sslo>][,GCSO=<gcso>][,MCSO=<mcso>][,GC2SO=<gc2so>][,GC3SO=<gc3so>][,TIF=<tif>][,GPRSSO=<gprsso>][,OSMSSO=<osmsso>][,TSMSSO=<tsmsso>][,MMSO=<mmso>][,ETICK=<etick>][,EOINCI=<eoinci>];or HGCEC:CSP=<csp>[,SSLO=<sslo>][,GCSO=<gcso>][,MC4SO=<mc3so>][,GC2SO=<gc2so>][,GC3SO=<gc3so>][,TIF=<tif>][,GPRSSO=<gprsso>][,OSMSSO=<osmsso>][,TSMSSO=<tsmsso>][,MMSO=<mmso>][,ETINCI=<etinci>][,EOICK=<eoick>];or

Page 253: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 239

HGCEC:CSP=<csp>[,SSLO=<sslo>][,GCSO=<gcso>][,MC3SO=<mc3so>][,GC2SO=<gc2so>][,GC3SO=<gc3so>][,TIF=<tif>][,GPRSSO=<gprsso>][,OSMSSO=<osmsso>][,TSMSSO=<tsmsso>][,MMSO=<mmso>][,ETINCI=<etinci>][,EOICK=<eoick>];or HGCEC:CSP=<csp>[,SSLO=<sslo>][,GCSO=<gcso>][,MC2SO=<mc2so>][,GC2SO=<gc2so>][,GC3SO=<gc3so>][,TIF=<tif>][,GPRSSO=<gprsso>][,OSMSSO=<osmsso>][,TSMSSO=<tsmsso>][,MMSO=<mmso>][,ETINCI=<etinci>][, EOICK=<eoick>];or HGCEC:CSP=<csp>[,SSLO=<sslo>][,GCSO=<gcso>][,MCSO=<mcso>][,GC2SO=<gc2so>][,GC3SO=<gc3so>][,TIF=<tif>][,GPRSSO=<gprsso>][,OSMSSO=<osmsso>][,TSMSSO=<tsmsso>][,MMSO=<mmso>][,ETINCI=<etinci>][, EOICK=<eoick >];or HGCEC:CSP=<csp>[,SSLO=<sslo>][,GCSO=<gcso>][,MC4SO=<mc3so>][,GC2SO=<gc2so>][,GC3SO=<gc3so>][,TIF=<tif>][,GPRSSO=<gprsso>][,OSMSSO=<osmsso>][,TSMSSO=<tsmsso>][,MMSO=<mmso>][,ETICK=<etick>][, EOICK=<eoick >];orHGCEC:CSP=<csp>[,SSLO=<sslo>][,GCSO=<gcso>][,MC3SO=<mc3so>][,GC2SO=<gc2so>][,GC3SO=<gc3so>][,TIF=<tif>][,GPRSSO=<gprsso>][,OSMSSO=<osmsso>][,TSMSSO=<tsmsso>][,MMSO=<mmso>][,ETICK=<etick>][, EOICK=<eoick >];or HGCEC:CSP=<csp>[,SSLO=<sslo>][,GCSO=<gcso>][,MC2SO=<mc2so>][,GC2SO=<gc2so>][,GC3SO=<gc3so>][,TIF=<tif>][,GPRSSO=<gprsso>][,OSMSSO=<osmsso>][,TSMSSO=<tsmsso>][,MMSO=<mmso>][,ETICK=<etick>][, EOICK=<eoick >];or HGCEC:CSP=<csp>[,SSLO=<sslo>][,GCSO=<gcso>][,MCSO=<mcso>][,GC2SO=<gc2so>][,GC3SO=<gc3so>][,TIF=<tif>][,GPRSSO=<gprsso>][,OSMSSO=<osmsso>][,TSMSSO=<tsmsso>][,MMSO=<mmso>][,ETICK=<etick>][, EOICK=<eoick >];}Where<msisdn> = MSISDN.<csp> = CAMEL subscription profile.<sslo> = Subscriber state and location information sending CAMEL subscription option.<gcso> = GMSC/gsmSCF CAMEL phase 1 support subscription option.<mc4so> = Mobile Switching Centre (MSC) / Visitor Location Register (VLR) CAMEL phase 4 denied subscription option.<mc3so> = Mobile Switching Centre (MSC) / Visitor Location Register (VLR) CAMEL phase 3 denied subscription option.<mc2so> = MSC/VLR CAMEL phase 2 denied subscription option.<mcso> = MSC/VLR CAMEL phase 1 denied subscription option.<gc2so> = GMSC/gsmSCF CAMEL phase 2 support subscription option.<gc3so> = Gateway Mobile Switching Centre (GMSC)/Global System for Mobile Communication Service Control Function(gsmSCF) CAMEL phase 3 support subscription option.<tif> = Translation information flag.<gprsso> = General Packet Radio Service (GPRS) CAMEL phase 3 denied subscription option.<osmsso> = Originating Short Message Service (SMS) CAMEL phase 3 denied subscription option.<tsmsso> = Terminating SMS CAMEL phase 4 denied subscription option.<mmso> = Mobility management CAMEL phase 3 denied subscription option.<etinci> = Extended terminating intelligent network capability indicator.

Page 254: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

240 Oracle Corporation

<etick> = Extended terminating intelligent network category key.<eoinci> = Extended originating intelligent network capability indicator.<eoick> = Extended originating intelligent network category key.Note:1 User should provide either MSISDN or CSP parameter even these parameters are optional.

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_CAMEL-EXTENDED_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_CAMEL-EXTENDED_RETURN_INFO = <NE error code>:<NE error description>

A_ERIC-HLR_R12-0_MOD_CAMEL-EXTENDED-RBRolls back the modification made to camel extended feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.modCAMELExtendedRB.

Table 176: A_ERIC-HLR_R12-0_MOD_CAMEL-EXTENDED-RB

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S O

CSP CAMEL subscription profile.

1 - 255 S O

Page 255: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 241

OLD_SSLO Subscriber state and location information sending CAMEL subscription option.

0 - Subscriber state and location information are not sent at Send Routing Information MAP version 3 response1 - Subscriber state and location information are sent at Send Routing Information MAP version 3 response

S O

OLD_GCSO GMSC/gsmSCF CAMEL phase 1 support subscription option.

0 - Allow call terminating handling without CAMEL invocation 1 - Apply ODB of all incoming calls

S O

OLD_MC3SO Mobile Switching Centre (MSC) / Visitor Location Register (VLR) CAMEL phase 3 denied subscription option.

Valid values are from 0 to 2.(0-Allow mobile subscriber's registration in the Serving GPRS Support Node (SGSN) without sending GPRS CAMEL phase 3 data when CAMEL phase 3 data is not allowed to be sent to the SGSN;1-Deny mobile subscriber's registration in the SGSN when CAMEL phase 3 data is not allowed to be sent to the SGSN)

S O

Table 176: A_ERIC-HLR_R12-0_MOD_CAMEL-EXTENDED-RB

Parameter Name Description RangeDefault Value

Type Class

Page 256: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

242 Oracle Corporation

OLD_MC2SO MSC/VLR CAMEL phase 2 denied subscription option.

Valid values are from 0 to 2.(0 Check if mobile subscriber's registration in the serving MSC/VLR with CAMEL phase 1 data can be performed or register without CAMEL data when CAMEL phase 2 data is not allowed to be sent to the MSC/VLR 1 Network induced activation of supplementary service Barring of All Outgoing Calls (BAOC) performed when CAMEL phase 2 data is not allowed to be sent to the serving MSC/VLR 2 Deny mobile subscriber's registration in the serving MSC/VLR when CAMEL phase 2 data is not allowed to be sent to the MSC/VLR)

S O

Table 176: A_ERIC-HLR_R12-0_MOD_CAMEL-EXTENDED-RB

Parameter Name Description RangeDefault Value

Type Class

Page 257: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 243

OLD_MCSO MSC/VLR CAMEL phase 1 denied subscription option.

Valid values are from 0 to 2.(0-Allow mobile subscriber's registration in the serving MSC/VLR without sending CAMEL data when CAMEL phase 1 data is not allowed to be sent to the MSC/VLR;1-Network induced activation of supplementary service BAOC performed when CAMEL phase 1 data is not allowed to be sent to the serving MSC/VLR;2-Deny mobile subscriber's registration in the serving MSC/VLR when CAMEL phase 1 data is not allowed to be sent to the MSC/VLR)

S O

OLD_GC2SO GMSC/gsmSCF CAMEL phase 2 support subscription option.

Valid values are 0 and 1.(0-Allow call terminating handling with CAMEL phase 1 invocation when CAMEL phase 2 is not supported in the interrogating GMSC/gsmSCF;1-Apply Operator Determined Barring (ODB) of all incoming calls when CAMEL phase 2 is not supported in the interrogating GMSC/gsmSCF).

S O

Table 176: A_ERIC-HLR_R12-0_MOD_CAMEL-EXTENDED-RB

Parameter Name Description RangeDefault Value

Type Class

Page 258: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

244 Oracle Corporation

OLD_GC3SO Gateway Mobile Switching Centre (GMSC)/Global System for Mobile Communication Service Control Function(gsmSCF) CAMEL phase 3 support subscription option.

Valid values are 0 and 1.(0-Allow call terminating handling with CAMEL phase 1 invocation when CAMEL phase 2 is not supported in the interrogating GMSC/gsmSCF;1-Apply Operator Determined Barring (ODB) of all incoming calls when CAMEL phase 2 is not supported in the interrogating GMSC/gsmSCF).

S O

OLD_TIF Translation information flag.

Valid values are 0 and 1.(0-Number length, format and conditional barring checks are performed, when the mobile subscriber or the service provider registers a forwarded-to number;1-Number length, format and conditional barring checks are not performed, when the mobile subscriber or the service provider registers a forwarded-to number)

S O

Table 176: A_ERIC-HLR_R12-0_MOD_CAMEL-EXTENDED-RB

Parameter Name Description RangeDefault Value

Type Class

Page 259: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 245

OLD_GPRSSO General Packet Radio Service (GPRS) CAMEL phase 3 denied subscription option.

Valid values are 0 and 1.(0-Allow mobile subscriber's registration in the Serving GPRS Support Node (SGSN) without sending GPRS CAMEL phase 3 data when CAMEL phase 3 data is not allowed to be sent to the SGSN;1-Deny mobile subscriber's registration in the SGSN when CAMEL phase 3 data is not allowed to be sent to the SGSN)

S O

Table 176: A_ERIC-HLR_R12-0_MOD_CAMEL-EXTENDED-RB

Parameter Name Description RangeDefault Value

Type Class

Page 260: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

246 Oracle Corporation

OLD_OSMSSO Originating Short Message Service (SMS) CAMEL phase 3 denied subscription option.

Valid values are from 0 to 2.(0-Allow mobile subscriber's registration in the serving node (MSC/VLR or SGSN or both) without sending originating SMS CAMEL phase 3 data when CAMEL phase 3 data is not allowed to be sent to the MSC/VLR or SGSN;1-Network induced service withdrawal of Teleservice Short Message MO/PP (TS22) performed when CAMEL phase 3 data is not allowed to be sent to the MSC/VLR or SGSN;2-Deny mobile subscriber's registration in the serving node (MSC/VLR or SGSN or both) when CAMEL phase 3 data is not allowed to be sent to the MSC/VLR or SGSN)

S O

Table 176: A_ERIC-HLR_R12-0_MOD_CAMEL-EXTENDED-RB

Parameter Name Description RangeDefault Value

Type Class

Page 261: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 247

OLD_TSMSSO Terminating SMS CAMEL phase 4 denied subscription option.

Valid values are from 0 to 2.(0-Allow mobile subscriber's registration in the serving node (MSC/VLR or SGSN or both) without sending terminating SMS CAMEL phase 4 data when terminating SMS CAMEL phase 4 data is not allowed to be sent to the MSC/VLR or SGSN or both;1-Allow mobile subscriber's registration in the serving node (MSC/VLR or SGSN or both) without sending terminating SMS CAMEL phase 4 data, when terminating SMS CAMEL phase 4 data is not allowed to be sent to the MSC/VLR or SGSN or both. Network induced service invocation of an incoming call barring service is applied to mobile terminating short message delivery via MSC or SGSN or both;2-Deny mobile subscriber's registration in the serving node (MSC/VLR or SGSN or both) when terminating SMS CAMEL phase 4 data is not allowed to be sent to the MSC/VLR or SGSN or both)

S O

Table 176: A_ERIC-HLR_R12-0_MOD_CAMEL-EXTENDED-RB

Parameter Name Description RangeDefault Value

Type Class

Page 262: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

248 Oracle Corporation

OLD_MMSO Mobility management CAMEL phase 3 denied subscription option.

Valid values are 0 to 1.(0-Allow mobile subscriber's registration in the serving MSC/VLR without sending mobility management CAMEL phase 3 data when CAMEL phase 3 data is not allowed to be sent to the MSC/VLR 1-Deny mobile subscriber's registration in the serving MSC/VLR when CAMEL phase 3 data is not allowed to be sent to the MSC/VLR )

S O

OLD_ETINCI Extended terminating intelligent network capability indicator.

0 - 255 S O

OLD_ETICK Extended terminating intelligent network category key.

0 - 999 S O

OLD_EOINCI Extended originating intelligent network capability indicator.

0 - 255 S O

OLD_EOICK Extended originating intelligent network category key.

0 - 999 S O

Table 176: A_ERIC-HLR_R12-0_MOD_CAMEL-EXTENDED-RB

Parameter Name Description RangeDefault Value

Type Class

Page 263: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 249

MML commandsIf (Optional parameter MSISDN provided) THEN

{

HGCEC:MSISDN=<msisdn>[,SSLO=<old_sslo>][,GCSO=<old_ old_gcso>][,MC3SO=<old_mc3so>][,GC2SO=<old_gc2so>][,GC3SO=<old_gc3so>][,TIF=

OLD_MC4SO Mobile Switching Centre (MSC) / Visitor Location Register (VLR) CAMEL phase 4 denied subscription option.

Valid values are from 0 to 2.(0-Check if mobile subscriber's registration in the serving MSC/VLR with lower CAMEL phase data can be performed or register without CAMEL data when CAMEL phase 4 data is not allowed to be sent to the MSC/VLR;1-Network induced activation of supplementary service BAOC performed when CAMEL phase 4 data is not allowed to be sent to the serving MSC/VLR,For visited MSC terminating CAMEL trigger detection point, value 1 means the same as value 0;2-Deny mobile subscriber's registration in the serving MSC/VLR when CAMEL phase 4 data is not allowed to be sent to the MSC/VLR)

S O

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 176: A_ERIC-HLR_R12-0_MOD_CAMEL-EXTENDED-RB

Parameter Name Description RangeDefault Value

Type Class

Page 264: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

250 Oracle Corporation

<old_tif>][,GPRSSO=<old_gprsso>][,OSMSSO=<old_osmsso>][,TSMSSO=<old_tsmsso>][,MMSO=<old_mmso>][,ETINCI=<old_ old_etinci>][,EOINCI=<old_ old_eoinci>];

or HGCEC:MSISDN=<msisdn>[,SSLO=<old_sslo>][,GCSO=<old_gcso>][,MC2SO=<old_mc2so>][,GC2SO=<old_gc2so>][,GC3SO=<old_gc3so>][,TIF=<old_tif>][,GPRSSO=<old_gprsso>][,OSMSSO=<old_osmsso>][,TSMSSO=<old_tsmsso>][,MMSO=<old_mmso>][,ETINCI=<old_etinci>][,EOINCI=<old_eoinci>];or HGCEC:MSISDN=<msisdn>[,SSLO=<old_sslo>][,GCSO=<old_gcso>][,MCSO=<old_mcso>][,GC2SO=<old_gc2so>][,GC3SO=<old_gc3so>][,TIF=<old_tif>][,GPRSSO=<old_gprsso>][,OSMSSO=<old_osmsso>][,TSMSSO=<old_tsmsso>][,MMSO=<old_mmso>][,ETINCI=<old_etinci>][,EOINCI=<old_eoinci>];or HGCEC:MSISDN=<msisdn>[,SSLO=<old_sslo>][,GCSO=<old_gcso>][,MC3SO=<old_mc3so>][,GC2SO=<old_gc2so>][,GC3SO=<old_gc3so>][,TIF=<old_tif>][,GPRSSO=<old_gprsso>][,OSMSSO=<old_osmsso>][,TSMSSO=<old_tsmsso>][,MMSO=<old_mmso>][,ETICK=<old_etick>][,EOINCI=<old_eoinci>];or HGCEC:MSISDN=<msisdn>[,SSLO=<old_sslo>][,GCSO=<old_gcso>][,MC2SO=<old_mc2so>][,GC2SO=<old_gc2so>][,GC3SO=<old_gc3so>][,TIF=<old_tif>][,GPRSSO=<old_gprsso>][,OSMSSO=<old_osmsso>][,TSMSSO=<old_tsmsso>][,MMSO=<old_mmso>][,ETICK=<old_etick>][,EOINCI=<old_eoinci>];or HGCEC:MSISDN=<msisdn>[,SSLO=<old_sslo>][,GCSO=<old_gcso>][,MCSO=<old_mcso>][,GC2SO=<old_gc2so>][,GC3SO=<old_gc3so>][,TIF=<old_tif>][,GPRSSO=<old_gprsso>][,OSMSSO=<old_osmsso>][,TSMSSO=<old_tsmsso>][,MMSO=<old_mmso>][,ETICK=<old_etick>][,EOINCI=<old_eoinci>];or HGCEC:MSISDN=<msisdn>[,SSLO=<old_sslo>][,GCSO=<old_gcso>][,MC3SO=<old_mc3so>][,GC2SO=<old_gc2so>][,GC3SO=<old_gc3so>][,TIF=<old_tif>][,GPRSSO=<old_gprsso>][,OSMSSO=<old_osmsso>][,TSMSSO=<old_tsmsso>][,MMSO=<old_mmso>][,ETINCI=<old_etinci>][,EOICK=<old_eoick>];or HGCEC:MSISDN=<msisdn>[,SSLO=<old_sslo>][,GCSO=<old_gcso>][,MC2SO=<old_mc2so>][,GC2SO=<old_gc2so>][,GC3SO=<old_gc3so>][,TIF=<old_tif>][,GPRSSO=<old_gprsso>][,OSMSSO=<old_osmsso>][,TSMSSO=<old_tsmsso>][,MMSO=<old_mmso>][,ETINCI=<old_etinci>][, EOICK=<old_eoick>];or HGCEC:MSISDN=<msisdn>[,SSLO=<old_sslo>][,GCSO=<old_gcso>][,MCSO=<old_mcso>][,GC2SO=<old_gc2so>][,GC3SO=<old_gc3so>][,TIF=<old_tif>][,GPRSSO=<old_gprsso>][,OSMSSO=<old_osmsso>][,TSMSSO=<old_tsmsso>][,MMSO=<old_mmso>][,ETINCI=<old_etinci>][, EOICK=<old_eoick >];or HGCEC:MSISDN=<msisdn>[,SSLO=<old_sslo>][,GCSO=<old_gcso>][,MC3SO=<old_mc3so>][,GC2SO=<old_gc2so>][,GC3SO=<old_gc3so>][,TIF=<old_tif>][,GPRSSO=<old_gprsso>][,OSMSSO=<old_osmsso>][,TSMSSO=<old_tsmsso>][,MMSO=<old_mmso>][,ETICK=<old_etick>][, EOICK=<old_eoick >];or HGCEC:MSISDN=<msisdn>[,SSLO=<old_sslo>][,GCSO=<old_gcso>][,MC2SO=<old_mc2so>][,GC2SO=<old_gc2so>][,GC3SO=<old_gc3so>][,TIF=<old_tif>][,GPRSSO=<old_gprsso>][,OSMSSO=<old_osmsso>][,TSMSSO=<old_tsmsso>][,MMSO=<old_mmso>][,ETICK=<old_etick>][, EOICK=<old_eoick >];

Page 265: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 251

or HGCEC:MSISDN=<msisdn>[,SSLO=<old_sslo>][,GCSO=<old_gcso>][,MCSO=<old_mcso>][,GC2SO=<old_gc2so>][,GC3SO=<old_gc3so>][,TIF=<old_tif>][,GPRSSO=<old_gprsso>][,OSMSSO=<old_osmsso>][,TSMSSO=<old_tsmsso>][,MMSO=<old_mmso>][,ETICK=<old_etick>][, EOICK=<old_eoick >];}else If(Optional Parameter CSP Provided) THEN{HGCEC:CSP=<csp>[,SSLO=<old_sslo>][,GCSO=<old_gcso>][,MC3SO=<old_mc3so>][,GC2SO=<old_gc2so>][,GC3SO=<old_gc3so>][,TIF=<old_tif>][,GPRSSO=<old_gprsso>][,OSMSSO=<old_osmsso>][,TSMSSO=<old_tsmsso>][,MMSO=<old_mmso>][,ETINCI=<old_etinci>][,EOINCI=<old_eoinci>];or HGCEC:CSP=<csp>[,SSLO=<old_sslo>][,GCSO=<old_gcso>][,MC2SO=<old_mc2so>][,GC2SO=<old_gc2so>][,GC3SO=<old_gc3so>][,TIF=<old_tif>][,GPRSSO=<old_gprsso>][,OSMSSO=<old_osmsso>][,TSMSSO=<old_tsmsso>][,MMSO=<old_mmso>][,ETINCI=<old_etinci>][,EOINCI=<old_eoinci>];or HGCEC:CSP=<csp>[,SSLO=<old_sslo>][,GCSO=<old_gcso>][,MCSO=<old_mcso>][,GC2SO=<old_gc2so>][,GC3SO=<old_gc3so>][,TIF=<old_tif>][,GPRSSO=<old_gprsso>][,OSMSSO=<old_osmsso>][,TSMSSO=<old_tsmsso>][,MMSO=<old_mmso>][,ETINCI=<old_etinci>][,EOINCI=<old_eoinci>];or HGCEC:CSP=<csp>[,SSLO=<old_sslo>][,GCSO=<old_gcso>][,MC3SO=<old_mc3so>][,GC2SO=<old_gc2so>][,GC3SO=<old_gc3so>][,TIF=<old_tif>][,GPRSSO=<old_gprsso>][,OSMSSO=<old_osmsso>][,TSMSSO=<old_tsmsso>][,MMSO=<old_mmso>][,ETICK=<old_etick>][,EOINCI=<old_eoinci>];or HGCEC:CSP=<csp>[,SSLO=<old_sslo>][,GCSO=<old_gcso>][,MC2SO=<old_mc2so>][,GC2SO=<old_gc2so>][,GC3SO=<old_gc3so>][,TIF=<old_tif>][,GPRSSO=<old_gprsso>][,OSMSSO=<old_osmsso>][,TSMSSO=<old_tsmsso>][,MMSO=<old_mmso>][,ETICK=<old_etick>][,EOINCI=<old_eoinci>];or HGCEC:CSP=<csp>[,SSLO=<old_sslo>][,GCSO=<old_gcso>][,MCSO=<old_mcso>][,GC2SO=<old_gc2so>][,GC3SO=<old_gc3so>][,TIF=<old_tif>][,GPRSSO=<old_gprsso>][,OSMSSO=<old_osmsso>][,TSMSSO=<old_tsmsso>][,MMSO=<old_mmso>][,ETICK=<old_etick>][,EOINCI=<old_eoinci>];or HGCEC:CSP=<csp>[,SSLO=<old_sslo>][,GCSO=<old_gcso>][,MC3SO=<old_mc3so>][,GC2SO=<old_gc2so>][,GC3SO=<old_gc3so>][,TIF=<old_tif>][,GPRSSO=<old_gprsso>][,OSMSSO=<old_osmsso>][,TSMSSO=<old_tsmsso>][,MMSO=<old_mmso>][,ETINCI=<old_etinci>][,EOICK=<old_eoick>];or HGCEC:CSP=<csp>[,SSLO=<old_sslo>][,GCSO=<old_gcso>][,MC2SO=<old_mc2so>][,GC2SO=<old_gc2so>][,GC3SO=<old_gc3so>][,TIF=<old_tif>][,GPRSSO=<old_gprsso>][,OSMSSO=<old_osmsso>][,TSMSSO=<old_tsmsso>][,MMSO=<old_mmso>][,ETINCI=<old_etinci>][, EOICK=<old_eoick>];or HGCEC:CSP=<csp>[,SSLO=<old_sslo>][,GCSO=<old_gcso>][,MCSO=<old_mcso>][,GC2SO=<old_gc2so>][,GC3SO=<old_gc3so>][,TIF=<old_tif>][,GPRSSO=<old_gprsso>][,OSMSSO=<old_osmsso>][,TSMSSO=<old_tsmsso>][,MMSO=<old_mmso>][,ETINCI=<old_etinci>][, EOICK=<old_eoick >];

Page 266: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

252 Oracle Corporation

or HGCEC:CSP=<csp>[,SSLO=<old_sslo>][,GCSO=<old_gcso>][,MC3SO=<old_mc3so>][,GC2SO=<old_gc2so>][,GC3SO=<old_gc3so>][,TIF=<old_tif>][,GPRSSO=<old_gprsso>][,OSMSSO=<old_osmsso>][,TSMSSO=<old_tsmsso>][,MMSO=<old_mmso>][,ETICK=<old_etick>][, EOICK=<old_eoick >];or HGCEC:CSP=<csp>[,SSLO=<old_sslo>][,GCSO=<old_gcso>][,MC2SO=<old_mc2so>][,GC2SO=<old_gc2so>][,GC3SO=<old_gc3so>][,TIF=<old_tif>][,GPRSSO=<old_gprsso>][,OSMSSO=<old_osmsso>][,TSMSSO=<old_tsmsso>][,MMSO=<old_mmso>][,ETICK=<old_etick>][, EOICK=<old_eoick >];or HGCEC:CSP=<csp>[,SSLO=<old_sslo>][,GCSO=<old_gcso>][,MCSO=<old_mcso>][,GC2SO=<old_gc2so>][,GC3SO=<old_gc3so>][,TIF=<old_tif>][,GPRSSO=<old_gprsso>][,OSMSSO=<old_osmsso>][,TSMSSO=<old_tsmsso>][,MMSO=<old_mmso>][,ETICK=<old_etick>][, EOICK=<old_eoick >];}

Where<msisdn> = MSISDN.<csp> = CAMEL subscription profile.<old_sslo> = Subscriber state and location information sending CAMEL subscription option.<old_gcso> = GMSC/gsmSCF CAMEL phase 1 support subscription option.<old_mc3so> = Mobile Switching Centre (MSC) / Visitor Location Register (VLR) CAMEL phase 3 denied subscription option.<old_mc2so> = MSC/VLR CAMEL phase 2 denied subscription option.<old_mcso> = MSC/VLR CAMEL phase 1 denied subscription option.<old_gc2so> = GMSC/gsmSCF CAMEL phase 2 support subscription option.<old_gc3so> = Gateway Mobile Switching Centre (GMSC)/Global System for Mobile Communication Service Control Function(gsmSCF) CAMEL phase 3 support subscription option.<old_tif> = Translation information flag.<old_gprsso> = General Packet Radio Service (GPRS) CAMEL phase 3 denied subscription option.<old_osmsso> = Originating Short Message Service (SMS) CAMEL phase 3 denied subscription option.<old_tsmsso> = Terminating SMS CAMEL phase 4 denied subscription option.<old_mmso> = Mobility management CAMEL phase 3 denied subscription option.<old_etinci> = Extended terminating intelligent network capability indicator.<old_etick> = Extended terminating intelligent network category key.<old_eoinci> = Extended originating intelligent network capability indicator.<old_eoick> = Extended originating intelligent network category key.

Note:1 User should provide either MSISDN or CSP parameter even these parameters are optional.

Output parameters

Return as CSDL Parameter :

Page 267: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 253

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_CAMEL-EXTENDED-RB_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_CAMEL-EXTENDED-RB_RETURN_INFO = <NE error code>:<NE error description>

A_ERIC-HLR_R12-0_MOD_CAMEL-RBRolls back the modification made to camel services feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.modCAMELRB.

Table 177: A_ERIC-HLR_R12-0_MOD_CAMEL-RB

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S O

CSP Old CAMEL subscription profile.

1 - 255 S O

OLD_TDPDATA Multiple CAMEL features to be added using MML optimization. Consists of: OLD_TDPDATA[i].TDPTYPE,OLD_TDPDATA[i].TDP,OLD_TDPDATA[i].SK,OLD_TDPDATA[i].GSA,OLD_TDPDATA[i].DEH,OLD_TDPDATA[i].CCH,OLD_TDPDATA[i].I,OLD_TDPDATA[i].DIALNUM where i is any number

C N

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 268: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

254 Oracle Corporation

MML commandsHGCMC:MSISDN=<msisdn>,MMTDP[,SK=<old_sk>][,GSA=<old_gsa>][,DEH=<old_deh>][,I=<old_i>][,CCH=<old_cch>]; or HGCMC:MSISDN=<msisdn>,DSTDP=<old_dstdp>[,SK=<old_sk>][,GSA=<old_gsa>][,DEH=<old_deh>][,I=<old_i>][,CCH=<old_cch>]; or HGCMC:MSISDN=<msisdn>,TSMSTDP=<old_tsmstdp>[,SK=<old_sk>][,GSA=<old_gsa>][,DEH=<old_deh>][,I=<old_i>][,CCH=<old_cch>]; or HGCMC:MSISDN=<msisdn>,OSMSTDP=<old_osmstdp>[,SK=<old_sk>][,GSA=<old_gsa>][,DEH=<old_deh>][,I=<old_i>][,CCH=<old_cch>]; or HGCMC:MSISDN=<msisdn>,GPRSTDP=<old_gprstdp>[,SK=<old_sk>][,GSA=<old_gsa>][,DEH=<old_deh>][,I=<old_i>][,CCH=<old_cch>]; or HGCMC:MSISDN=<msisdn>,OCTDP=<old_octdp>[,SK=<old_sk>][,GSA=<old_gsa>][,DEH=<old_deh>][,I=<old_i>][,CCH=<old_cch>]; or HGCMC:MSISDN=<msisdn>,TCTDP=<old_tcpdp>[,SK=<old_sk>][,GSA=<old_gsa>][,DEH=<old_deh>][,I=<old_i>][,CCH=<old_cch>];or HGCMC:MSISDN=<msisdn>,VTTDP=<old_vttdp>[,SK=<old_sk>][,GSA=<old_gsa>][,DEH=<old_deh>][,I=<old_i>][,CCH=<old_cch>];}else If(Optional Parameter CSP Provided) THEN{HGCMC:CSP=<csp>,MMTDP[,SK=<old_sk>][,GSA=<old_gsa>][,DEH=<old_deh>][,I=<old_i>][,CCH=<old_cch>]; or HGCMC:CSP=<csp>,DSTDP=<old_dstdp>[,SK=<old_sk>][,GSA=<old_gsa>][,DEH=<old_deh>][,I=<old_i>][,CCH=<old_cch>]; or HGCMC:CSP=<csp>,TSMSTDP=<old_tsmstdp>[,SK=<old_sk>][,GSA=<old_gsa>][,DEH=<old_deh>][,I=<old_i>][,CCH=<old_cch>]; or HGCMC:CSP=<csp>,OSMSTDP=<old_osmstdp>[,SK=<old_sk>][,GSA=<old_gsa>][,DEH=<old_deh>][,I=<old_i>][,CCH=<old_cch>]; or HGCMC:CSP=<csp>,GPRSTDP=<old_gprstdp>[,SK=<old_sk>][,GSA=<old_gsa>][,DEH=<old_deh>][,I=<old_i>][,CCH=<old_cch>]; or HGCMC:CSP=<csp>,OCTDP=<old_octdp>[,SK=<old_sk>][,GSA=<old_gsa>][,DEH=<old_deh>][,I=<old_i>][,CCH=<old_cch>]; or HGCMC:CSP=<csp>,TCTDP=<old_tcpdp>[,SK=<old_sk>][,GSA=<old_gsa>][,DEH=<old_deh>][,I=<old_i>][,CCH=<old_cch>];or HGCMC:CSP=<csp>,VTTDP=<old_vttdp>[,SK=<old_sk>][,GSA=<old_gsa>][,DEH=<old_deh>][,I=<old_i>][,CCH=<old_cch>];}

Page 269: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 255

Where<msisdn> = MSISDN.<csp> = CAMEL subscription profile.<old_mmtdp> = Old value of mobility Management CAMEL Subscription Data Trigger Detection Point.<old_dstdp> = Old value of dialled service CAMEL Subscription Data Trigger Detection Point.<old_tsmstdp> = Old value of terminating SMS CAMEL Subscription Data Trigger Detection Point.<old_osmstdp> = Old value of Originating SMS Trigger Detection Point.<old_gprstdp> = Old value of GPRS CAMEL Trigger Detection Point.<old_octdp> = Old value of Originating CAMEL Subscription Data Trigger Detection Point.<old_tctdp> = Old value of Terminating CAMEL Subscription Data Trigger Detection Point.<old_vttdp> = Old value of visited Mobile Switching Centre terminating Trigger Detection Point.<old_sk> = Old value of Service Key.<old_gsa> = Old value of GSM service control function address.<old_deh> = Old value of Default Error Handling.<old_cch> = Old value of CAMEL Capability Handling.<old_i> = Old valud of Inhibitor Indicator.

Note:1 User should provide either MSISDN or CSP parameter even these parameters are optional.

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_CAMEL-RB_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_CAMEL-RB_RETURN_INFO = <NE error code>:<NE error description>

A_ERIC-HLR_R12-0_MOD_CAPLModifies the channel allocation priority level feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.modCAPL.

Table 178: A_ERIC-HLR_R12-0_MOD_CAPL

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

Page 270: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

256 Oracle Corporation

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = CAPL

<command_value> = 0 to 15

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_CAPL_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_CAPL_RETURN_INFO = <NE error code>:<NE error description>

A_ERIC-HLR_R12-0_MOD_CAPL-RBRolls back the modification made to channel allocation priority level feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.modCAPLRB.

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

SUD_VALUE Subscriber data value. 0 - 15 S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 179: A_ERIC-HLR_R12-0_MOD_CAPL-RB

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

Table 178: A_ERIC-HLR_R12-0_MOD_CAPL

Parameter Name Description RangeDefault Value

Type Class

Page 271: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 257

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = CAPL

<command_value> = 0 to 15

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_CAPL-RB_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_CAPL-RB_RETURN_INFO = <NE error code>:<NE error description>

A_ERIC-HLR_R12-0_MOD_CATModifies the subscriber category feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.modCAT.

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

OLD_SUD_VALUE Old subscriber data value.

0 - 15 S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 180: A_ERIC-HLR_R12-0_MOD_CAT

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

Table 179: A_ERIC-HLR_R12-0_MOD_CAPL-RB

Parameter Name Description RangeDefault Value

Type Class

Page 272: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

258 Oracle Corporation

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = CAT

<command_value> = 0 to 2

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_CAT_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_CAT_RETURN_INFO = <NE error code>:<NE error description>

A_ERIC-HLR_R12-0_MOD_CAT-RBRolls back the modification made to subscriber category feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.modCATRB.

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

SUD_VALUE Subscriber data value. 0 - 255 S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 181: A_ERIC-HLR_R12-0_MOD_CAT-RB

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

Table 180: A_ERIC-HLR_R12-0_MOD_CAT

Parameter Name Description RangeDefault Value

Type Class

Page 273: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 259

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = CAT

<command_value> = 0 to 2

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_CAT-RB_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_CAT-RB_RETURN_INFO = <NE error code>:<NE error description>

A_ERIC-HLR_R12-0_MOD_DBSGModifies the default basic service group feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.modDBSG.

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

OLD_SUD_VALUE Old subscriber data value.

0 - 255 S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 182: A_ERIC-HLR_R12-0_MOD_DBSG

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

Table 181: A_ERIC-HLR_R12-0_MOD_CAT-RB

Parameter Name Description RangeDefault Value

Type Class

Page 274: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

260 Oracle Corporation

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where

<command_code> = DBSG

<command_value> = 1 to 6

Note: Values 2 and 4 are not used.

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_DBSG_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_DBSG_RETURN_INFO = <NE error code>:<NE error description>

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

DSBG_VALUE Subscriber data value. Range is from 1 to 6. Values 2 and 4 are not used.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 182: A_ERIC-HLR_R12-0_MOD_DBSG

Parameter Name Description RangeDefault Value

Type Class

Page 275: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 261

A_ERIC-HLR_R12-0_MOD_DBSG-RBRolls back the modification made to default basic service group feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.modDBSGRB.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = DBSG

<command_value> = 0 to 6

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_DBSG-RB_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_DBSG-RB_RETURN_INFO = <NE error code>:<NE error description>

Table 183: A_ERIC-HLR_R12-0_MOD_DBSG-RB

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

OLD_SUD_VALUE Old subscriber data value.

1 - 6 S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 276: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

262 Oracle Corporation

A_ERIC-HLR_R12-0_MOD_DEMLPPModifies the default enhanced multi-level precedence and pre-emption feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.modDEMLPP.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = DEMLPP

<command_value> = 0 to 6

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_DEMLPP_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_DEMLPP_RETURN_INFO = <NE error code>:<NE error description>

Table 184: A_ERIC-HLR_R12-0_MOD_DEMLPP

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

SUD_VALUE Subscriber data value. 0 - 6 S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 277: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 263

A_ERIC-HLR_R12-0_MOD_DEMLPP-RBRolls back the modification made to default enhanced multi-level precedence and pre-emption feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.modDEMLPPRB.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = DEMLPP

<command_value> = 0 to 6

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_DEMLPP-RB_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_DEMLPP-RB_RETURN_INFO = <NE error code>:<NE error description>

Table 185: A_ERIC-HLR_R12-0_MOD_DEMLPP-RB

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

OLD_SUD_VALUE Old subscriber data value.

0 - 6 S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 278: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

264 Oracle Corporation

A_ERIC-HLR_R12-0_MOD_FEATURES

Modifies the multiple features with optimized MMLs. Enables massive change of subscriber data. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLROptProvisioning.modFeatures.

Table 186: A_ERIC-HLR_R12-0_MOD_FEATURES

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDNS MSISDN series. Digit String 5-15 digits. Each digit is 0-9.

S O

IMSIS IMSI series. Digit String 5-15 digits. Each digit is 0-9.

S O

SUD Multiple features to be modified using MML optimization for subscriber data.

Consists of:

SUD[i].CODESUD[i].VALUE where i is any number.

C N

NEWSUD Multiple features to be modified using MML optimization for new subscriber data.

Consists of:

NEWSUD[i].CODENEWSUD[i].VALUEwhere i is any number.

C R

UPDATENET Update network flag. Only valid values are YES or NO.

S O

Page 279: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 265

MML commandsHGMCI:[MSISDNS=<msisdns>,][SUD=<sud>,]NEWSUD=<newsud>[,UPDATENET];

OR

HGMCI:[IMSIS=<imsis>,][SUD=<sud>,]NEWSUD=<newsud>[,UPDATENET];

where<msisdns> = MSISDN

<imsis> = IMSI series

<sud> = Subscriber data

<newsud> = New subscriber data

UPDATENET = Flag to update network

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_FEATURES_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_FEATURES_RETURN_INFO = <NE error code>:<NE error description>

A_ERIC-HLR_R12-0_MOD_GPRSModifies the GPRS services. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.modGPRS.

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 186: A_ERIC-HLR_R12-0_MOD_FEATURES

Parameter Name Description RangeDefault Value

Type Class

Page 280: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

266 Oracle Corporation

Table 187: A_ERIC-HLR_R12-0_MOD_GPRS

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote Network Element Name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S O

IMSI International Mobile Subscriber Identity.

Digit String 6-15 digits. Each digit is 0-9.

S O

EQOSID Extended Quality Of Service identifier.

The valid values are from 0 to 4095.

I O

APNID Access Point Name Identifier.

Valid values are from 0 to 16383.

I O

PDPADD Packet Data Protocol Address.

This value is specified as an IP address. Ex: oc1.oc2.oc3.oc4 where oc is an octet in the range of 0 to 255.

I O

PDPTY Packet Data Protocol context type.

Valid values are IPV4 - IP version 4 or PPP - Point to Point Protocol.

I O

PDPCH Packet Data Protocol context charging characteristics.

Valid values are from 1 to 15.

I O

VPAA Visited Public Land Mobile address allowed.

Valid values are YES or NO.

I O

PDPID PDP context identifier. Valid values are from 1 to 10.

I R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 281: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 267

MML commandsHGPDC:MSISDN=<msisdn>,PDPID=<pdpid>[,EQOSID=<eqosid>][,APNID=<apnid>][,PDPADD=<pdpadd>][,PDPTY=<pdpty>][,PDPCH=<pdpch>][,VPAA=<vpaa>];

or

HGPDC:MSISDN=<msisdn>,PDPID=<pdpid>[,EQOSID=<eqosid>][,APNID=<apnid>][,PDPADD=<pdpadd>][,PDPTY=<pdpty>][,PDPCH=ERASE][,VPAA=<vpaa>];

or

HGPDC:MSISDN=<msisdn>,PDPID=<pdpid>[,EQOSID=<eqosid>][,APNID=<apnid>][,PDPADD=ERASE][,PDPTY=<pdpty>][,PDPCH=<pdpch>][,VPAA=<vpaa>];

or

HGPDC:MSISDN=<msisdn>,PDPID=<pdpid>[,EQOSID=<eqosid>][,APNID=<apnid>][,PDPADD=ERASE][,PDPTY=<pdpty>][,PDPCH=ERASE][,VPAA=<vpaa>];

or

HGPDC:MSISDN=<msisdn>,PDPID=<pdpid>[,EQOSID=<eqosid>][,APNID=WILDCARD][,PDPADD=<pdpadd>][,PDPTY=<pdpty>][,PDPCH=<pdpch>][,VPAA=<vpaa>];

or

HGPDC:MSISDN=<msisdn>,PDPID=<pdpid>[,EQOSID=<eqosid>][,APNID=WILDCARD][,PDPADD=<pdpadd>][,PDPTY=<pdpty>][,PDPCH=ERASE][,VPAA=<vpaa>];

or

HGPDC:MSISDN=<msisdn>,PDPID=<pdpid>[,EQOSID=<eqosid>][,APNID=WILDCARD][,PDPADD=ERASE][,PDPTY=<pdpty>][,PDPCH=<pdpch>][,VPAA=<vpaa>];

or

HGPDC:MSISDN=<msisdn>,PDPID=<pdpid>[,EQOSID=<eqosid>][,APNID=WILDCARD][,PDPADD=ERASE][,PDPTY=<pdpty>][,PDPCH=ERASE][,VPAA=<vpaa>];

or

HGPDC:IMSI=<imsi>,PDPID=<pdpid>[,EQOSID=<eqosid>][,APNID=<apnid>][,PDPADD=<pdpadd>][,PDPTY=<pdpty>][,PDPCH=<pdpch>][,VPAA=<vpaa>];

or

HGPDC:IMSI=<imsi>,PDPID=<pdpid>[,EQOSID=<eqosid>][,APNID=<apnid>][,PDPADD=<pdpadd>][,PDPTY=<pdpty>][,PDPCH=ERASE][,VPAA=<vpaa>];

or

HGPDC:IMSI=<imsi>,PDPID=<pdpid>[,EQOSID=<eqosid>][,APNID=<apnid>][,PDPADD=ERASE][,PDPTY=<pdpty>][,PDPCH=<pdpch>][,VPAA=<vpaa>];

or

HGPDC:IMSI=<imsi>,PDPID=<pdpid>[,EQOSID=<eqosid>][,APNID=<apnid>][,PDPADD=ERASE][,PDPTY=<pdpty>][,PDPCH=ERASE][,VPAA=<vpaa>];

or

HGPDC:IMSI=<imsi>,PDPID=<pdpid>[,EQOSID=<eqosid>][,APNID=WILDCARD][,PDPADD=<pdpadd>][,PDPTY=<pdpty>][,PDPCH=<pdpch>][,VPAA=<vpaa>];

or

Page 282: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

268 Oracle Corporation

HGPDC:IMSI=<imsi>,PDPID=<pdpid>[,EQOSID=<eqosid>][,APNID=WILDCARD][,PDPADD=<pdpadd>][,PDPTY=<pdpty>][,PDPCH=ERASE][,VPAA=<vpaa>];

or

HGPDC:IMSI=<imsi>,PDPID=<pdpid>[,EQOSID=<eqosid>][,APNID=WILDCARD][,PDPADD=ERASE][,PDPTY=<pdpty>][,PDPCH=<pdpch>][,VPAA=<vpaa>];

or

HGPDC:IMSI=<imsi>,PDPID=<pdpid>[,EQOSID=<eqosid>][,APNID=WILDCARD][,PDPADD=ERASE][,PDPTY=<pdpty>][,PDPCH=ERASE][,VPAA=<vpaa>];

Where

<imsi> = IMSI.

<msisdn> = MSISDN.

<eqosid> = Extended Quality of Service.

<apnid> = Access Point Name identifier.

<pdpadd> = Packet Data Protocol (PDP) address.

<pdpch> = Packet Data Protocol (PDP) context type.

<pdpty> = Packet Data Protocol (PDP) charging characteristics.

<vpaa> = Visited Public Land Mobile Network (VPLMN) address allowed.

<pdpid> = PDP context identifier.

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_GPRS_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_GPRS_RETURN_INFO = <NE error code>:<NE error description>

A_ERIC-HLR_R12-0_MOD_GPRS-RBRollback functionality for the Modify GPRS services. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_r12_0.prov.HLRProvisioning.modGPRSRB.

Table 188: A_ERIC-HLR_R12-0_MOD_GPRS-RB

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote Network Element Name

S R

Page 283: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 269

MML commandsHGPDC:MSISDN=<msisdn>,PDPID=<pdpid>[,EQOSID=<eqosid>][,APNID=<apnid>][,PDPADD=<pdpadd>][,PDPTY=<pdpty>][,PDPCH=<pdpch>][,VPAA=<vpaa>];

or

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S O

IMSI International Mobile Subscriber Identity.

Digit String 6-15 digits. Each digit is 0-9.

S O

OLD_EQOSID Extended Quality Of Service identifier.

The valid values are from 0 to 4095.

I O

OLD_APNID Access Point Name Identifier.

Valid values are from 0 to 16383.

I O

OLD_PDPADD Packet Data Protocol Address.

This value is specified as an IP address. Ex: oc1.oc2.oc3.oc4 where oc is an octet in the range of 0 to 255.

I O

OLD_PDPTY Packet Data Protocol context type.

Valid values are IPV4 - IP version 4 or PPP - Point to Point Protocol.

I O

OLD_PDPCH Packet Data Protocol context charging characteristics.

Valid values are from 1 to 15.

I O

OLD_VPAA Visited Public Land Mobile address allowed.

Valid values are YES or NO.

I O

OLD_PDPID PDP context identifier. Valid values are from 1 to 10.

I R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 188: A_ERIC-HLR_R12-0_MOD_GPRS-RB

Parameter Name Description RangeDefault Value

Type Class

Page 284: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

270 Oracle Corporation

HGPDC:MSISDN=<msisdn>,PDPID=<pdpid>[,EQOSID=<eqosid>][,APNID=<apnid>][,PDPADD=<pdpadd>][,PDPTY=<pdpty>][,PDPCH=ERASE][,VPAA=<vpaa>];

or

HGPDC:MSISDN=<msisdn>,PDPID=<pdpid>[,EQOSID=<eqosid>][,APNID=<apnid>][,PDPADD=ERASE][,PDPTY=<pdpty>][,PDPCH=<pdpch>][,VPAA=<vpaa>];

or

HGPDC:MSISDN=<msisdn>,PDPID=<pdpid>[,EQOSID=<eqosid>][,APNID=<apnid>][,PDPADD=ERASE][,PDPTY=<pdpty>][,PDPCH=ERASE][,VPAA=<vpaa>];

or

HGPDC:MSISDN=<msisdn>,PDPID=<pdpid>[,EQOSID=<eqosid>][,APNID=WILDCARD][,PDPADD=<pdpadd>][,PDPTY=<pdpty>][,PDPCH=<pdpch>][,VPAA=<vpaa>];

or

HGPDC:MSISDN=<msisdn>,PDPID=<pdpid>[,EQOSID=<eqosid>][,APNID=WILDCARD][,PDPADD=<pdpadd>][,PDPTY=<pdpty>][,PDPCH=ERASE][,VPAA=<vpaa>];

or

HGPDC:MSISDN=<msisdn>,PDPID=<pdpid>[,EQOSID=<eqosid>][,APNID=WILDCARD][,PDPADD=ERASE][,PDPTY=<pdpty>][,PDPCH=<pdpch>][,VPAA=<vpaa>];

or

HGPDC:MSISDN=<msisdn>,PDPID=<pdpid>[,EQOSID=<eqosid>][,APNID=WILDCARD][,PDPADD=ERASE][,PDPTY=<pdpty>][,PDPCH=ERASE][,VPAA=<vpaa>];

or

HGPDC:IMSI=<imsi>,PDPID=<pdpid>[,EQOSID=<eqosid>][,APNID=<apnid>][,PDPADD=<pdpadd>][,PDPTY=<pdpty>][,PDPCH=<pdpch>][,VPAA=<vpaa>];

or

HGPDC:IMSI=<imsi>,PDPID=<pdpid>[,EQOSID=<eqosid>][,APNID=<apnid>][,PDPADD=<pdpadd>][,PDPTY=<pdpty>][,PDPCH=ERASE][,VPAA=<vpaa>];

or

HGPDC:IMSI=<imsi>,PDPID=<pdpid>[,EQOSID=<eqosid>][,APNID=<apnid>][,PDPADD=ERASE][,PDPTY=<pdpty>][,PDPCH=<pdpch>][,VPAA=<vpaa>];

or

HGPDC:IMSI=<imsi>,PDPID=<pdpid>[,EQOSID=<eqosid>][,APNID=<apnid>][,PDPADD=ERASE][,PDPTY=<pdpty>][,PDPCH=ERASE][,VPAA=<vpaa>];

or

HGPDC:IMSI=<imsi>,PDPID=<pdpid>[,EQOSID=<eqosid>][,APNID=WILDCARD][,PDPADD=<pdpadd>][,PDPTY=<pdpty>][,PDPCH=<pdpch>][,VPAA=<vpaa>];

or

HGPDC:IMSI=<imsi>,PDPID=<pdpid>[,EQOSID=<eqosid>][,APNID=WILDCARD][,PDPADD=<pdpadd>][,PDPTY=<pdpty>][,PDPCH=ERASE][,VPAA=<vpaa>];

or

Page 285: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 271

HGPDC:IMSI=<imsi>,PDPID=<pdpid>[,EQOSID=<eqosid>][,APNID=WILDCARD][,PDPADD=ERASE][,PDPTY=<pdpty>][,PDPCH=<pdpch>][,VPAA=<vpaa>];

or

HGPDC:IMSI=<imsi>,PDPID=<pdpid>[,EQOSID=<eqosid>][,APNID=WILDCARD][,PDPADD=ERASE][,PDPTY=<pdpty>][,PDPCH=ERASE][,VPAA=<vpaa>];

Where

<imsi> = IMSI.

<msisdn> = MSISDN.

<eqosid> = Extended Quality of Service.

<apnid> = Access Point Name identifier.

<pdpadd> = Packet Data Protocol (PDP) address.

<pdpch> = Packet Data Protocol (PDP) context type.

<pdpty> = Packet Data Protocol (PDP) charging characteristics.

<vpaa> = Visited Public Land Mobile Network (VPLMN) address allowed.

<pdpid> = PDP context identifier.

Output parameters

Return as CSDL Parameter :

A_ERIC-HLR_R12-0_MOD_GPRS-RB_UDET = <user defined exit type>

Return as info parameters :

A_ERIC-HLR_R12-0_MOD_GPRS-RB_RETURN_INFO = <NE error code>:<NE error description>

A_ERIC-HLR_R12-0_MOD_HPNModifies the high penetration notification feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.modHPN.

Table 189: A_ERIC-HLR_R12-0_MOD_HPN

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

SUD_VALUE Subscriber data value. 0 - 6 S R

Page 286: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

272 Oracle Corporation

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where

<command_code> = HPN

<command_value> = 0 to 6

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_HPN_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_HPN_RETURN_INFO = <NE error code>:<NE error description>

A_ERIC-HLR_R12-0_MOD_HPN-RBRolls back the modification made to high penetration notification feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.modHPNRB.

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 190: A_ERIC-HLR_R12-0_MOD_HPN-RB

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

Table 189: A_ERIC-HLR_R12-0_MOD_HPN

Parameter Name Description RangeDefault Value

Type Class

Page 287: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 273

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = HPN

<command_value> = 0 to 6

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_HPN-RB_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_HPN-RB_RETURN_INFO = <NE error code>:<NE error description>

A_ERIC-HLR_R12-0_MOD_MEMLPPModifies the enhanced multi-level precedence and pre-emption maximum priority level feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.modMEMLPP.

OLD_SUD_VALUE Old subscriber data value.

0 - 6 S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 191: A_ERIC-HLR_R12-0_MOD_MEMLPP

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

Table 190: A_ERIC-HLR_R12-0_MOD_HPN-RB

Parameter Name Description RangeDefault Value

Type Class

Page 288: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

274 Oracle Corporation

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = MEMLPP

<command_value> = 0 to 6

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_MEMLPP_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_MEMLPP_RETURN_INFO = <NE error code>:<NE error description>

A_ERIC-HLR_R12-0_MOD_MEMLPP-RBRolls back the modification made to enhanced multi-level precedence and pre-emption maximum priority level feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.modMEMLPPRB.

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

SUD_VALUE Subscriber data value. 0 - 6 S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 192: A_ERIC-HLR_R12-0_MOD_MEMLPP-RB

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

Table 191: A_ERIC-HLR_R12-0_MOD_MEMLPP

Parameter Name Description RangeDefault Value

Type Class

Page 289: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 275

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = MEMLPP

<command_value> = 0 to 6

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_MEMLPP-RB_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_MEMLPP-RB_RETURN_INFO = <NE error code>:<NE error description>

A_ERIC-HLR_R12-0_MOD_NAMModifies the network access mode feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.modNAM.

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

OLD_SUD_VALUE Old subscriber data value.

0 - 6 S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 193: A_ERIC-HLR_R12-0_MOD_NAM

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

Table 192: A_ERIC-HLR_R12-0_MOD_MEMLPP-RB

Parameter Name Description RangeDefault Value

Type Class

Page 290: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

276 Oracle Corporation

MML commandsHGSNC:MSISDN=<msisdn>,NAM=<nam>[,KEEP];

or

HGSNC:IMSI=<imsi>,NAM=<nam>[,KEEP];

where <msisdn> = MSISDN

<imsi> = IMSI

<nam> = Network Access Mode values are 0,1or 2

KEEP = Keep the subscriber data or not

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_NAM_UDET = <user defined exit type>

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S O

IMSI IMSI. S O

SUD_VALUE Subscriber data value. GPRS_AND_NON_GPRS (Translated to 0 - both non GPRS and GPRS)NON_GPRS (Translated to 1 - non GPRS)GPRS (Translated to 2 - GPRS)

S R

KEEP Flag to specify whether to keep subscriber data or not.

Y/N YES S O

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 193: A_ERIC-HLR_R12-0_MOD_NAM

Parameter Name Description RangeDefault Value

Type Class

Page 291: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 277

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_NAM_RETURN_INFO = <NE error code>:<NE error description>

A_ERIC-HLR_R12-0_MOD_NAM-RBRolls back the modification made to network access mode feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.modNAMRB.

MML commandsHGSNC:MSISDN=<msisdn>,NAM=<old_nam>[,KEEP];

or

HGSNC:IMSI=<imsi>,NAM=<old_nam>[,KEEP];

Table 194: A_ERIC-HLR_R12-0_MOD_NAM-RB

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S O

IMSI IMSI. S O

OLD_SUD_VALUE Old value of subscriber data.

GPRS_AND_NON_GPRS (Translated to 0 - both non GPRS and GPRS)NON_GPRS (Translated to 1 - non GPRS)GPRS (Translated to 2 - GPRS)

S R

OLD_KEEP Old value of flag to specify whether to keep subscriber data or not.

Y/N S O

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 292: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

278 Oracle Corporation

where <msisdn> = MSISDN

<imsi> = IMSI

<old_nam> = Old Network Access Mode values are 0,1 or 2

KEEP = Keep the subscriber data

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_NAM-RB_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_NAM-RB_RETURN_INFO = <NE error code>:<NE error description>

A_ERIC-HLR_R12-0_MOD_OBIModifies the operator determined barring of all incoming calls feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.modOBI.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where

Table 195: A_ERIC-HLR_R12-0_MOD_OBI

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

SUD_VALUE Subscriber data value. 0 - 2 S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 293: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 279

<command_code> = OBI

<command_value> = 0 to 2

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_OBI_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_OBI_RETURN_INFO = <NE error code>:<NE error description>

A_ERIC-HLR_R12-0_MOD_OBI-RBRolls back the modification made to operator determined barring of all incoming calls feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.modOBIRB.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = OBI

<command_value> = 0 to 2

Table 196: A_ERIC-HLR_R12-0_MOD_OBI-RB

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

OLD_SUD_VALUE Old subscriber data value.

0 - 2 S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 294: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

280 Oracle Corporation

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_OBI-RB_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_OBI-RB_RETURN_INFO = <NE error code>:<NE error description>

A_ERIC-HLR_R12-0_MOD_OBOModifies the operator determined barring of all outgoing calls feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.modOBO.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = OBO

<command_value> = 0 to 4

Output parameters

Return as CSDL Parameter :

Table 197: A_ERIC-HLR_R12-0_MOD_OBO

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

SUD_VALUE Subscriber data value. 0 - 4 S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 295: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 281

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_OBO_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_OBO_RETURN_INFO = <NE error code>:<NE error description>

A_ERIC-HLR_R12-0_MOD_OBO-RBRolls back the modify operator determined barring of all outgoing calls feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.modOBORB.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = OBO

<command_value> = 0 to 4

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_OBO-RB_UDET = <user defined exit type>

Return as info parameters :

Table 198: A_ERIC-HLR_R12-0_MOD_OBO-RB

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

OLD_SUD_VALUE Old subscriber data value.

0 - 4 S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 296: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

282 Oracle Corporation

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_OBO-RB_RETURN_INFO = <NE error code>:<NE error description>

A_ERIC-HLR_R12-0_MOD_OBRModifies the operator determined barring of roaming feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.modOBR.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = OBR

<command_value> = 0 to 2

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_OBR_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_OBR_RETURN_INFO = <NE error code>:<NE error description>

Table 199: A_ERIC-HLR_R12-0_MOD_OBR

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

SUD_VALUE Subscriber data value. 0 - 2 S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 297: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 283

A_ERIC-HLR_R12-0_MOD_OBR-RBRolls back the modification made to operator determined barring of roaming feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.modOBRRB.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = OBR

<command_value> = 0 to 2

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_OBR-RB_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_OBR-RB_RETURN_INFO = <NE error code>:<NE error description>

Table 200: A_ERIC-HLR_R12-0_MOD_OBR-RB

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

OLD_SUD_VALUE Old subscriber data value.

0 - 2 S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 298: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

284 Oracle Corporation

A_ERIC-HLR_R12-0_MOD_OBRFModifies the operator determined barring of roaming of registration of forwarded-to number feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.modOBRF.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = OBRF

<command_value> = 0 to 5

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_OBRF_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_OBRF_RETURN_INFO = <NE error code>:<NE error description>

Table 201: A_ERIC-HLR_R12-0_MOD_OBRF

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

SUD_VALUE Subscriber data value. 0 - 5 S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 299: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 285

A_ERIC-HLR_R12-0_MOD_OBRF-RBRolls back the modification made to operator determined barring of roaming of registration of forwarded-to number feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.modOBRFRB.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = OBRF

<command_value> = 0 to 5

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_OBRF-RB_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_OBRF-RB_RETURN_INFO = <NE error code>:<NE error description>

Table 202: A_ERIC-HLR_R12-0_MOD_OBRF-RB

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

OLD_SUD_VALUE Old subscriber data value.

0 - 5 S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 300: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

286 Oracle Corporation

A_ERIC-HLR_R12-0_MOD_OBZOModifies the operator determined barring of outgoing inter-zonal calls feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.modOBZO.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = OBZO

<command_value> = 0 to 3

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MODIFY_IMSI-CANCEL_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MODIFY_IMSI-CANCEL_RETURN_INFO = <NE error code>:<NE error description>

Table 203: A_ERIC-HLR_R12-0_MOD_OBZO

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

SUD_VALUE Subscriber data value. 0 - 3 S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 301: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 287

A_ERIC-HLR_R12-0_MOD_OBZO-RBRolls back the modification made to operator determined barring of outgoing inter-zonal calls feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.modOBZORB.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = OBZO

<command_value> = 0 to 3

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_OBZO-RB_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_OBZO-RB_RETURN_INFO = <NE error code>:<NE error description>

Table 204: A_ERIC-HLR_R12-0_MOD_OBZO-RB

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

OLD_SUD_VALUE Old subscriber data value.

0 - 3 S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 302: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

288 Oracle Corporation

A_ERIC-HLR_R12-0_MOD_OFAModifies the origin for forwarded-to number analysis feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.modOFA.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = OFA

<command_value> = 0 to 511

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_OFA_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_OFA_RETURN_INFO = <NE error code>:<NE error description>

Table 205: A_ERIC-HLR_R12-0_MOD_OFA

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

SUD_VALUE Subscriber data value. 0 - 511 S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 303: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 289

A_ERIC-HLR_R12-0_MOD_OFA-RBRolls back the modification made to origin for forwarded-to number analysis feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.modOFARB.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = OFA

<command_value> = 0 to 511

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_OFA-RB_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_OFA-RB_RETURN_INFO = <NE error code>:<NE error description>

Table 206: A_ERIC-HLR_R12-0_MOD_OFA-RB

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

OLD_SUD_VALUE Old subscriber data value.

0 - 511 S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 304: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

290 Oracle Corporation

A_ERIC-HLR_R12-0_MOD_OICKModifies the originating intelligent network category key feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.modOICK.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = OICK

<command_value> = 0 to 999

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_OICK_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_OICK_RETURN_INFO = <NE error code>:<NE error description>

Table 207: A_ERIC-HLR_R12-0_MOD_OICK

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

SUD_VALUE Subscriber data value. 0 - 999 S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 305: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 291

A_ERIC-HLR_R12-0_MOD_OICK-RBRolls back the modification made to originating intelligent network category key feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.modOICKRB.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = OICK

<command_value> = 0 to 999

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_OICK-RB_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_OICK-RB_RETURN_INFO = <NE error code>:<NE error description>

Table 208: A_ERIC-HLR_R12-0_MOD_OICK-RB

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

OLD_SUD_VALUE Old subscriber data value.

0 - 999 S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 306: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

292 Oracle Corporation

A_ERIC-HLR_R12-0_MOD_PICIModifies the primary inter-exchange carrier identity feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.modPICI.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = PICI

<command_value> = 0 to 255

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_PICI_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_PICI_RETURN_INFO = <NE error code>:<NE error description>

Table 209: A_ERIC-HLR_R12-0_MOD_PICI

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

SUD_VALUE Subscriber data value. 0 - 255 S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 307: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 293

A_ERIC-HLR_R12-0_MOD_PICI-RBRolls back the modification made to primary inter-exchange carrier identity feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.modPICIRB.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = PICI

<command_value> = 0 to 255

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_PICI-RB_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_PICI-RB_RETURN_INFO = <NE error code>:<NE error description>

Table 210: A_ERIC-HLR_R12-0_MOD_PICI-RB

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

OLD_SUD_VALUE Old subscriber data value.

0 - 255 S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 308: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

294 Oracle Corporation

A_ERIC-HLR_R12-0_MOD_PWDModifies the subscriber password feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.modPWD.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = PWD

<command_value> = 0 to 9999

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_PWD_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_PWD_RETURN_INFO = <NE error code>:<NE error description>

Table 211: A_ERIC-HLR_R12-0_MOD_PWD

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

SUD_VALUE Subscriber data value. 0 - 9999 S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 309: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 295

A_ERIC-HLR_R12-0_MOD_PWD-RBRolls back the modification made to subscriber password feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.modPWDRB.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = PWD

<command_value> = 0 to 9999

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_PWD-RB_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_PWD-RB_RETURN_INFO = <NE error code>:<NE error description>

Table 212: A_ERIC-HLR_R12-0_MOD_PWD-RB

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

OLD_SUD_VALUE Old subscriber data value.

0 - 9999 S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 310: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

296 Oracle Corporation

A_ERIC-HLR_R12-0_MOD_REGSERModifies the regional services feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.modREGSER.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = REGSER

<command_value> = 0 to 65534

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_REGSER_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_REGSER_RETURN_INFO = <NE error code>:<NE error description>

Table 213: A_ERIC-HLR_R12-0_MOD_REGSER

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

SUD_VALUE Subscriber data value. 0 - 65534 S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 311: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 297

A_ERIC-HLR_R12-0_MOD_REGSER-RBRolls back the modification made to regional services feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.modREGSERRB.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = REGSER

<command_value> = 0 to 65534

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_REGSER-RB_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_REGSER-RB_RETURN_INFO = <NE error code>:<NE error description>

Table 214: A_ERIC-HLR_R12-0_MOD_REGSER-RB

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

OLD_SUD_VALUE Old subscriber data value.

0 - 65534 S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 312: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

298 Oracle Corporation

A_ERIC-HLR_R12-0_MOD_SCHARModifies the subscriber charging characteristics feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.modSCHAR.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = SCHAR

<command_value> = 0 to 15

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_SCHAR_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_SCHAR_RETURN_INFO = <NE error code>:<NE error description>

Table 215: A_ERIC-HLR_R12-0_MOD_SCHAR

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

SUD_VALUE Subscriber data value. 1 - 15 S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 313: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 299

A_ERIC-HLR_R12-0_MOD_SCHAR-RBRolls back the modification made to subscriber charging characteristics feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.modSCHARRB.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = SCHAR

<command_value> = 0 to 15

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_SCHAR-RB_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_SCHAR-RB_RETURN_INFO = <NE error code>:<NE error description>

Table 216: A_ERIC-HLR_R12-0_MOD_SCHAR-RB

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

OLD_SUD_VALUE Old subscriber data value.

1 - 15 S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 314: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

300 Oracle Corporation

A_ERIC-HLR_R12-0_MOD_SOCBModifies the subscription option control of barring services feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.modSOCB.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = SOCB

<command_value> = 0 to 3

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_SOCB_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_SOCB_RETURN_INFO = <NE error code>:<NE error description>

Table 217: A_ERIC-HLR_R12-0_MOD_SOCB

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

SUD_VALUE Subscriber data value. 0 - 3 S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 315: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 301

A_ERIC-HLR_R12-0_MOD_SOCB-RBRolls back the modification made to subscription option control of barring services feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.modSOCBRB.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = SOCB

<command_value> = 0 to 3

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_SOCB-RB_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_SOCB-RB_RETURN_INFO = <NE error code>:<NE error description>

Table 218: A_ERIC-HLR_R12-0_MOD_SOCB-RB

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

OLD_SUD_VALUE Old subscriber data value.

0 - 3 S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 316: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

302 Oracle Corporation

A_ERIC-HLR_R12-0_MOD_SOCFBModifies the subscription option call forwarding on mobile subscriber busy feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.modSOCFB.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = SOCFB

<command_value> = 0 to 3

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_SOCFB_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_SOCFB_RETURN_INFO = <NE error code>:<NE error description>

Table 219: A_ERIC-HLR_R12-0_MOD_SOCFB

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

SUD_VALUE Subscriber data value. 0 - 3 S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 317: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 303

A_ERIC-HLR_R12-0_MOD_SOCFB-RBRolls back the modification made to subscription option call forwarding on mobile subscriber busy feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.modSOCFBRB.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = SOCFB

<command_value> = 0 to 3

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_SOCFB-RB_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_SOCFB-RB_RETURN_INFO = <NE error code>:<NE error description>

Table 220: A_ERIC-HLR_R12-0_MOD_SOCFB-RB

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

OLD_SUD_VALUE Old subscriber data value.

0 - 3 S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 318: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

304 Oracle Corporation

A_ERIC-HLR_R12-0_MOD_SOCFRYModifies the subscription option call forwarding on no reply feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.modSOCFRY.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = SOCFRY

<command_value> = 0 to 3

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_SOCFRY_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_SOCFRY_RETURN_INFO = <NE error code>:<NE error description>

Table 221: A_ERIC-HLR_R12-0_MOD_SOCFRY

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

SUD_VALUE Subscriber data value. 0 - 3 S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 319: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 305

A_ERIC-HLR_R12-0_MOD_SOCFRY-RBRolls back the modification made to subscription option call forwarding on no reply feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.modSOCFRYRB.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = SOCFRY

<command_value> = 0 to 3

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_SOCFRY-RB_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_SOCFRY-RB_RETURN_INFO = <NE error code>:<NE error description>

Table 222: A_ERIC-HLR_R12-0_MOD_SOCFRY-RB

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

OLD_SUD_VALUE Old subscriber data value.

0 - 3 S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 320: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

306 Oracle Corporation

A_ERIC-HLR_R12-0_MOD_SOCLIRModifies the subscription option calling line identification restriction feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.modSOCLIR.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = SOCLIR

<command_value> = 0 to 2

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_SOCLIR_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_SOCLIR_RETURN_INFO = <NE error code>:<NE error description>

Table 223: A_ERIC-HLR_R12-0_MOD_SOCLIR

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

SUD_VALUE Subscriber data value. 0 - 2 S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 321: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 307

A_ERIC-HLR_R12-0_MOD_SOCLIR-RBRolls back the modification made to subscription option calling line identification restriction feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.modSOCLIRRB.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = SOCLIR

<command_value> = 0 to 2

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_SOCLIR-RB_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_SOCLIR-RB_RETURN_INFO = <NE error code>:<NE error description>

Table 224: A_ERIC-HLR_R12-0_MOD_SOCLIR-RB

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

OLD_SUD_VALUE Old subscriber data value.

0 - 2 S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 322: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

308 Oracle Corporation

A_ERIC-HLR_R12-0_MOD_SODCFModifies the subscription option of notification of default call forwarding feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.modSODCF.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = SODCF

<command_value> = 0 to 2

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_SODCF_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_SODCF_RETURN_INFO = <NE error code>:<NE error description>

Table 225: A_ERIC-HLR_R12-0_MOD_SODCF

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

SUD_VALUE Subscriber data value. 0 - 2 S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 323: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 309

A_ERIC-HLR_R12-0_MOD_SODCF-RBRolls back the modification made to subscription option of notification of default call forwarding feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.modSODCFRB.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = SODCF

<command_value> = 0 to 2

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_SODCF-RB_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_SODCF-RB_RETURN_INFO = <NE error code>:<NE error description>

Table 226: A_ERIC-HLR_R12-0_MOD_SODCF-RB

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

OLD_SUD_VALUE Old subscriber data value.

0 - 2 S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 324: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

310 Oracle Corporation

A_ERIC-HLR_R12-0_MOD_SOSDCFModifies the subscription option for specification of forwarding conditions for default call forwarding feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.modSOSDCF.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = SOSDCF

<command_value> = 0 to 2

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_SOSDCF_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_SOSDCF_RETURN_INFO = <NE error code>:<NE error description>

Table 227: A_ERIC-HLR_R12-0_MOD_SOSDCF

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

SUD_VALUE Subscriber data value. 0 - 2 S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 325: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 311

A_ERIC-HLR_R12-0_MOD_SOSDCF-RBRolls back the modification made to subscription option for specification of forwarding conditions for default call forwarding feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.modSOSDCFRB.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = SOSDCF

<command_value> = 0 to 2

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_SOSDCF-RB_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_SOSDCF-RB_RETURN_INFO = <NE error code>:<NE error description>

Table 228: A_ERIC-HLR_R12-0_MOD_SOSDCF-RB

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

OLD_SUD_VALUE Old subscriber data value.

0 - 2 S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 326: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

312 Oracle Corporation

A_ERIC-HLR_R12-0_MOD_STYPEModifies the subscription type feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.modSTYPE.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = STYPE

<command_value> = 0 to 127

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_STYPE_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_STYPE_RETURN_INFO = <NE error code>:<NE error description>

Table 229: A_ERIC-HLR_R12-0_MOD_STYPE

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

SUD_VALUE Subscriber data value. 0 - 127 S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 327: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 313

A_ERIC-HLR_R12-0_MOD_STYPE-RBRolls back the modification made to subscription type feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.modSTYPERB.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = STYPE

<command_value> = 0 to 127

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_STYPE-RB_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_STYPE-RB_RETURN_INFO = <NE error code>:<NE error description>

Table 230: A_ERIC-HLR_R12-0_MOD_STYPE-RB

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

OLD_SUD_VALUE Old subscriber data value.

0 - 127 S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 328: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

314 Oracle Corporation

A_ERIC-HLR_R12-0_MOD_TICKModifies the terminating intelligent network category key feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.modTICK.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = TICK

<command_value> = 0 to 999

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_TICK_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_TICK_RETURN_INFO = <NE error code>:<NE error description>

Table 231: A_ERIC-HLR_R12-0_MOD_TICK

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

SUD_VALUE Subscriber data value. 0 - 999 S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 329: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 315

A_ERIC-HLR_R12-0_MOD_TICK-RBRolls back the modification made to terminating intelligent network category key feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.modTICKRB.

MML commandsHGSDC:MSISDN=<msisdn>,SUD=<command_code>-<command_value>;

where <command_code> = TICK

<command_value> = 0 to 999

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_TICK-RB_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_MOD_TICK-RB_RETURN_INFO = <NE error code>:<NE error description>

Table 232: A_ERIC-HLR_R12-0_MOD_TICK-RB

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

OLD_SUD_VALUE Old subscriber data value.

0 - 999 S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 330: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

316 Oracle Corporation

A_ERIC-HLR_R12-0_REM_AMSISDNRemoves the additional MSISDN feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.remAMSISDN.

MML commandsHGAME:AMSISDN=<amsisdn>;

where <amsisdn> = Additional MSISDN

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_REM_AMSISDN_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_REM_AMSISDN_RETURN_INFO = <NE error code>:<NE error description>

Table 233: A_ERIC-HLR_R12-0_REM_AMSISDN

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

AMSISDN Additional MSISDN. S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 331: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 317

A_ERIC-HLR_R12-0_REM_APNRemoves the access point name feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.remAPN.

MML commandsHGAPE:APN1=<apn1>[,APN2=<apn2>];

Or

HGAPE: APNID=<apnid>;

where<apn1> = first part of the access point name

<apn2> = second part of the access point name

<apnid> = access point name identifier

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_REM_APN_UDET = <user defined exit type>

Return as info parameters :

Table 234: A_ERIC-HLR_R12-0_REM_APN

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

APN1 Access point name first part.

Text string 1 - 41 characters

S O

APN2 Access point name second part.

Text string 1 - 41 characters

S O

APNID Access point name identifier.

0 - 16383 S O

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 332: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

318 Oracle Corporation

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_REM_APN_RETURN_INFO = <NE error code>:<NE error description>

A_ERIC-HLR_R12-0_REM_BAICRemoves the barring of all incoming calls feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.remBAIC.

MML commandsHGSSE:MSISDN=<msisdn>,SS=BAIC[,BSG=<bsg>][,KEEP];

where <msisdn> = MSISDN

<bsg> = Basic Subscriber Group

KEEP = Keep subscriber data

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_REM_BAIC_UDET = <user defined exit type>

Return as info parameters :

Table 235: A_ERIC-HLR_R12-0_REM_BAIC

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

BSG Basic service group. S O

KEEP Flag to specify whether to keep subscriber data or not.

Y/N NO S O

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 333: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 319

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_REM_BAIC_RETURN_INFO = <NE error code>:<NE error description>

A_ERIC-HLR_R12-0_REM_BAOCRemoves the barring of all outgoing calls feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.remBAOC.

MML commandsHGSSE:MSISDN=<msisdn>,SS=BAOC[,BSG=<bsg>][,KEEP];

where <msisdn> = MSISDN

<bsg> = Basic Subscriber Group

KEEP = Keep subscriber data

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_REM_BAOC_UDET = <user defined exit type>

Return as info parameters :

Table 236: A_ERIC-HLR_R12-0_REM_BAOC

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

BSG Basic service group. S O

KEEP Flag to specify whether to keep subscriber data or not.

Y/N NO S O

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 334: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

320 Oracle Corporation

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_REM_BAOC-CANCEL_RETURN_INFO = <NE error code>:<NE error description>

A_ERIC-HLR_R12-0_REM_BICRORemoves the barring of all incoming calls when roaming outside the home PLMN country feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.remBICRO.

MML commandsHGSSE:MSISDN=<msisdn>,SS=BICRO[,BSG=<bsg>][,KEEP];

where <msisdn> = MSISDN

<bsg> = Basic Subscriber Group

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_REM_BICRO_UDET = <user defined exit type>

Return as info parameters :

Table 237: A_ERIC-HLR_R12-0_REM_BICRO

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

BSG Basic service group. S O

KEEP Flag to specify whether to keep subscriber data or not.

Y/N NO S O

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 335: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 321

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_REM_BICRO_RETURN_INFO = <NE error code>:<NE error description>

A_ERIC-HLR_R12-0_REM_BOICRemoves the barring of all outgoing international calls feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.remBOIC.

MML commandsHGSSE:MSISDN=<msisdn>,SS=BOIC[,BSG=<bsg>][,KEEP];

where <msisdn> = MSISDN

<bsg> = Basic Subscriber Group

KEEP = Keep subscriber data

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_REM_BOIC_UDET = <user defined exit type>

Return as info parameters :

Table 238: A_ERIC-HLR_R12-0_REM_BOIC

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

BSG Basic service group. S O

KEEP Flag to specify whether to keep subscriber data or not.

Y/N NO S O

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 336: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

322 Oracle Corporation

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_REM_BOIC_RETURN_INFO = <NE error code>:<NE error description>

A_ERIC-HLR_R12-0_REM_BOIEXHRemoves the barring of all outgoing international calls except those directed to the home PLMN country feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.remBOIEXH.

MML commandsHGSSE:MSISDN=<msisdn>,SS=BOIEXH[,BSG=<bsg>][,KEEP];

where <msisdn> = MSISDN

<bsg> = Basic Subscriber Group

KEEP = Keep subscriber data

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_REM_BOIEXH_UDET = <user defined exit type>

Return as info parameters :

Table 239: A_ERIC-HLR_R12-0_REM_BOIEXH

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

BSG Basic service group. S O

KEEP Flag to specify whether to keep subscriber data or not.

Y/N NO S O

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 337: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 323

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_REM_BOIEXH_RETURN_INFO = <NE error code>:<NE error description>

A_ERIC-HLR_R12-0_REM_CAMELRemoves the camel services feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.remCAMEL.

Table 240: A_ERIC-HLR_R12-0_REM_CAMEL

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S O

CSP CAMEL subscription profile.

1 - 255 S O

MMTDP Mobility management CAMEL subscription data trigger detection point.

Valid values are from 0 to 4 and ALL.(0-Location update in the same Visitor Location Register (VLR) service area;1-Location update to another VLR service area;2-International Mobile Subscriber Identity (IMSI) attach;3-Mobile Station (MS) initiated IMSI detach (explicit detach);4-Network initiated IMSI detach (implicit detach);ALL-All mobility management CAMEL TDPs).

S O

DSTDP Dialled service CAMEL subscription data trigger detection point.

Valid values are from 1 to 10 and ALL( All dialled service CAMEL TDPs).

S O

Page 338: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

324 Oracle Corporation

TSMSTDP Terminating SMS CAMEL subscription data trigger detection point.

Valid value is 2 and ALL.(2-SMS Delivery Request,ALL-All terminating SMS CAMEL TDPs).

S O

OSMSTDP Originating SMS trigger detection point.

Valid value is 1 and ALL.(1-SMS collected info,ALL-All originating SMS CAMEL TDPs).

S O

GPRSTDP GPRS CAMEL trigger detection point.

Valid values are 1,2,11,12,14 and ALL. (1-Attach,2-Change of position GPRS session,11-Packet Data Protocol (PDP) context establishment,12-PDP context establishment acknowledgment,14-Change of position context,ALL-All GPRS CAMEL TDPs).

S O

OCTDP Originating CAMEL subscription data trigger detection point.

Valid values are 2,4 and ALL.(2-Collected info,4-Route select failure,ALL-All originating CAMEL TDPs).

S O

TCTDP Terminating CAMEL subscription data trigger detection point.

Valid values are 12,13,14 and ALL.(12-Terminating attempt authorized,13-Terminator busy,14-Terminator no answer,ALL-All terminating CAMEL TDPs).

S O

Table 240: A_ERIC-HLR_R12-0_REM_CAMEL

Parameter Name Description RangeDefault Value

Type Class

Page 339: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 325

MML commandsIf (Optional parameter MSISDN provided) THEN

{

HGCME:MSISDN=<msisdn>[,CCH=<cch>],MMTDP=<mmtdp>;

or

HGCME:MSISDN=<msisdn>[,CCH=<cch>],DSTDP=<dstdp>;

or

HGCME:MSISDN=<msisdn>[,CCH=<cch>],TSMSTDP=<tsmstdp>;

or

HGCME:MSISDN=<msisdn>[,CCH=<cch>],OSMSTDP=<osmstdp>;

or

HGCME:MSISDN=<msisdn>[,CCH=<cch>],GPRSTDP=<gprstdp>;

or

HGCME:MSISDN=<msisdn>[,CCH=<cch>],OCTDP=<octdp>[,TCTDP=<tctdp>];

or

HGCME:MSISDN=<msisdn>[,CCH=<cch>],TCTDP=<tctdp>;

VTTDP Visited mobile switching centre terminating trigger detection point.

Valid values are 12,13,14 and ALL.(12-Terminating attempt authorized,13-Terminator busy,14-Terminator no answer,ALL-All VMSC terminating CAMEL TDPs).

S O

CCH CAMEL capability handling.

Range is 1,2 ,3 or 4.(1-CAMEL phase 1;2-CAMEL phase 2;3-CAMEL phase 3;4-CAMEL phase 4;)

S O

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 240: A_ERIC-HLR_R12-0_REM_CAMEL

Parameter Name Description RangeDefault Value

Type Class

Page 340: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

326 Oracle Corporation

or

HGCME:MSISDN=<msisdn>[,CCH=<cch>],VTTDP=<vttdp>;

}

else If(Optional Parameter CSP Provided) THEN

{

HGCME:CSP=<csp>[,CCH=<cch>],MMTDP=<mmtdp>;

or

HGCME:CSP=<csp> [,CCH=<cch>],DSTDP=<dstdp>;

or

HGCME:CSP=<csp> [,CCH=<cch>],TSMSTDP=<tsmstdp>;

or

HGCME:CSP=<csp> [,CCH=<cch>],OSMSTDP=<osmstdp>;

or

HGCME:CSP=<csp> [,CCH=<cch>],GPRSTDP=<gprstdp>;

or

HGCME:CSP=<csp>[,CCH=<cch>],OCTDP=<octdp>[,TCTDP=<tctdp>];

or

HGCME:CSP=<csp> [,CCH=<cch>],TCTDP=<tctdp>;

or

HGCME:CSP=<csp> [,CCH=<cch>],VTTDP=<vttdp>;

}

Where

<msisdn> = MSISDN.

<csp> = CAMEL subscription profile.

<mmtdp> = Mobility Management CAMEL Subscription Data Trigger Detection Point.

<dstdp> = Dialled service CAMEL Subscription Data Trigger Detection Point.

<tsmstdp> = Terminating SMS CAMEL Subscription Data Trigger Detection Point.

<osmstdp> = Originating SMS Trigger Detection Point.

<gprstdp> = GPRS CAMEL Trigger Detection Point.

<octdp> = Originating CAMEL Subscription Data Trigger Detection Point.

<tctdp> = Terminating CAMEL Subscription Data Trigger Detection Point.

<vttdp> = Visited Mobile Switching Centre terminating Trigger Detection Point.

<cch> = CAMEL Capability Handling.

Note:1 User should provide either MSISDN or CSP parameter even these parameters are optional.

Page 341: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 327

Note:2 Addition of DSTDP, TSMSTDP and VTTDP is not currently supported by the model switch at Telstra. Hence the removal of these parameters

is not supported either. These features could be required in a further enhancement.

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_REM_CAMEL_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_REM_CAMEL_RETURN_INFO = <NE error code>:<NE error description>

A_ERIC-HLR_R12-0_REM_CAWRemoves the call waiting feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.remCAW.

MML commandsHGSSE:MSISDN=<msisdn>,SS=CAW[,BSG=<bsg>][,KEEP];

where

Table 241: A_ERIC-HLR_R12-0_REM_CAW

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

BSG Basic service group. S O

KEEP Flag to specify whether to keep subscriber data or not.

Y/N NO S O

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 342: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

328 Oracle Corporation

<msisdn> = MSISDN

<bsg> = Basic Subscriber Group

KEEP = Keep subscriber data

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_REM_CAW_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_REM_CAW_RETURN_INFO = <NE error code>:<NE error description>

A_ERIC-HLR_R12-0_REM_CFBRemoves the call forwarding on mobile subscriber busy feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.remCFB.

MML commandsHGSSE:MSISDN=<msisdn>,SS=CFB[,BSG=<bsg>][,KEEP];

where <msisdn> = MSISDN

Table 242: A_ERIC-HLR_R12-0_REM_CFB

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

BSG Basic service group. S O

KEEP Flag to specify whether to keep subscriber data or not.

Y/N NO S O

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 343: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 329

<bsg> = Basic Subscriber Group

KEEP = Keep subscriber data

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_REM_CFB_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_REM_CFB_RETURN_INFO = <NE error code>:<NE error description>

A_ERIC-HLR_R12-0_REM_CFNRCRemoves the call forwarding on mobile subscriber not reachable feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.remCFNRC.

MML commandsHGSSE:MSISDN=<msisdn>,SS=CFNRC[,BSG=<bsg>][,KEEP];

where <msisdn> = MSISDN

Table 243: A_ERIC-HLR_R12-0_REM_CFNRC

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

BSG Basic service group. S O

KEEP Flag to specify whether to keep subscriber data or not.

Y/N NO S O

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 344: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

330 Oracle Corporation

<bsg> = Basic Subscriber Group

KEEP = Keep subscriber data

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_REM_CFNRC_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_REM_CFNRC_RETURN_INFO = <NE error code>:<NE error description>

A_ERIC-HLR_R12-0_REM_CFNRYRemoves the call forwarding on no reply feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.remCFNRY.

MML commandsHGSSE:MSISDN=<msisdn>,SS=CFNRY[,BSG=<bsg>][,KEEP];

where <msisdn> = MSISDN

<bsg> = Basic Subscriber Group

Table 244: A_ERIC-HLR_R12-0_REM_CFNRY

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

BSG Basic service group. S O

KEEP Flag to specify whether to keep subscriber data or not.

Y/N NO S O

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 345: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 331

KEEP = Keep subscriber data

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_REM_CFNRY_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_REM_CFNRY_RETURN_INFO = <NE error code>:<NE error description>

A_ERIC-HLR_R12-0_REM_CFSRemoves the call forwarding services feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.remCFS.

MML commandsHGSSE:MSISDN=<msisdn>,SS=CFS[,BSG=<bsg>][,KEEP];

where <msisdn> = MSISDN

<bsg> = Basic Subscriber Group

KEEP = Keep subscriber data

Table 245: A_ERIC-HLR_R12-0_REM_CFS

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

BSG Basic service group. S O

KEEP Flag to specify whether to keep subscriber data or not.

Y/N NO S O

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 346: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

332 Oracle Corporation

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_REM_CFS_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_REM_CFS_RETURN_INFO = <NE error code>:<NE error description>

A_ERIC-HLR_R12-0_REM_CFURemoves the call forwarding unconditional feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.remCFU.

MML commandsHGSSE:MSISDN=<msisdn>,SS=CFU[,BSG=<bsg>][,KEEP];

where <msisdn> = MSISDN

<bsg> = Basic Subscriber Group

KEEP = Keep subscriber data

Table 246: A_ERIC-HLR_R12-0_REM_CFU

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

BSG Basic service group. S O

KEEP Flag to specify whether to keep subscriber data or not.

Y/N NO S O

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 347: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 333

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_REM_CFU_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_REM_CFU_RETURN_INFO = <NE error code>:<NE error description>

A_ERIC-HLR_R12-0_REM_CUGRemoves the closed user group feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.remCUG.

MML commandsHGCUE:MSISDN=<msisdn>,INDEX=<index>;

where<msisdn> = MSISDN

<index> = Closed user group index

Table 247: A_ERIC-HLR_R12-0_REM_CUG

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

INDEX Closed user group index.

0 - 32767

The value ALL may also be used for all closed user groups.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 348: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

334 Oracle Corporation

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_REM_CUG_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_REM_CUG_RETURN_INFO = <NE error code>:<NE error description>

A_ERIC-HLR_R12-0_REM_DCFRemoves the default call forwarding feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.remDCF.

MML commandsHGSSE:MSISDN=<msisdn>,SS=DCF[,BSG=<bsg>][,KEEP];

where <msisdn> = MSISDN

<bsg> = Basic Subscriber Group

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_REM_DCF_UDET = <user defined exit type>

Table 248: A_ERIC-HLR_R12-0_REM_DCF

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

BSG Basic service group. S O

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 349: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 335

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_REM_DCF_RETURN_INFO = <NE error code>:<NE error description>

A_ERIC-HLR_R12-0_REM_FEATURESRemoves the multiple features with optimized MMLs feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLROptProvisioning.remFeatures.

MML commandsHGSSE:MSISDN=msisdn,SS=<ss>[,BSG=<bsg>][,KEEP];

where<msisdn> = MSISDN

Table 249: A_ERIC-HLR_R12-0_REM_FEATURES

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

FEATURES Multiple features to be added using MML optimization.FEATURES[i].MSISDNFEATURES[i].SUD_CODEFEATURES[i].BSGFEATURES[i].FNUMFEATURES[i].OFAFEATURES[i].TIMEFEATURES[i].SADD where i is anynumber

C R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 350: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

336 Oracle Corporation

<ss> = Supplementary service

<bsg> = Basic service group

KEEP = Keep the data related to the Supplementary Service

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_REM_FEATURES_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_REM_FEATURES_RETURN_INFO = <NE error code>:<NE error description>

A_ERIC-HLR_R12-0_REM_GMLCRemoves the GMLC address feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.remGMLC.

Table 250: A_ERIC-HLR_R12-0_REM_GMLC

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

GMLCID GMLC identifier. Upto 5 GMLC ids can be specified.

They can be comma separated.

Example: 0, 255, 13.

ALL can specified to delete all identifiers.

S R

HGMLC Home GMLC address Identifier.

YES or NO S O

PPR Privacy profile register address identifier

YES or NO S O

Page 351: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 337

MML commandsHGSGE:MSISDN=<msisdn>,GMLCID=<gmlcid>;

or

HGSGE:MSISDN=<msisdn>,GMLCID=ALL;

or

HGSGE:MSISDN=<msisdn>,HGMLC;

or

HGSGE:MSISDN=<msisdn>,PPR;

Where

<msisdn> = MSISDN.

<gmlcid> = Identifier of GMLC.

HGMLC = Home GMLC

PPR = Privacy Profile Register

ALL = All GMLC identifiers.

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_REM_GMLC_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_REM_GMLC_RETURN_INFO = <NE error code>:<NE error description>

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 250: A_ERIC-HLR_R12-0_REM_GMLC

Parameter Name Description RangeDefault Value

Type Class

Page 352: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

338 Oracle Corporation

A_ERIC-HLR_R12-0_REM_GPRSRemoves the GPRS services feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.remGPRS.

MML commandsHGPDE:MSISDN=<msisdn>,PDPID=<pdpid>; or HGPDE:MSISDN=<msisdn>,PDPID=ALL; or HGPDE:IMSI=<imsi>,PDPID=<pdpid>; orHGPDE:IMSI=<imsi>,PDPID=ALL;

where<imsi> = IMSI

<msisdn> = MSISDN

<pdpid> = Subscriber Packet Data Protocol (PDP) context identifier

ALL = All subscriber Packet Data Protocol (PDP) context

Table 251: A_ERIC-HLR_R12-0_REM_GPRS

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S O

IMSI IMSI S O

PDPID Packet data protocol ID to be deleted. A single PDD ID is allowed or a list of comma separated ID's are allowed. It is also possible to delete all PDP's by setting the value to ALL.

C R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 353: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 339

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_REM_GPRS_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_REM_GPRS_RETURN_INFO = <NE error code>:<NE error description>

A_ERIC-HLR_R12-0_REM_LOC-SERVICESRemoves the location services feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.remLocServices.

Table 252: A_ERIC-HLR_R12-0_REM_LOC-SERVICES

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

UNIV Universal location services privacy class.

Only valid values are YES or NO

S O

CREL Call related location services privacy class.

Only valid values are YES or NO

S O

CUNRL Call unrelated location services privacy class.

Only valid values are YES or NO

S O

PLMNO PLMN operator location services privacy class

S O

INTID Internal identity list. 0 - 4

The list maybe comma separated.

Example: 0, 1, 3, 4

S O

Page 354: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

340 Oracle Corporation

MML commandsHGLDE:MSISDN=<msisdn>,UNIV; or HGLDE:MSISDN=<msisdn>,CREL[,EADD=<eadd>[,GRES]]; or HGLDE:MSISDN=<msisdn>,CUNRL[,EADD=<eadd>[,GRES]]; or

MOCL Location services mobile originating class list.

ALL - all Location class servicesASL - autonomous shelf locationBSL - basic shelf locationTTP - transfer to third party

The list can be comma separated.

Example : BSL,ASL

If ALL is used the other types may not be used

S O

SERVT Public Land Mobile Network (PLMN) operator LCS privacy class service type.

0 - 127 or ALL S O

EADD External location services client address.

Defined as E.164 number.

Defined as E.164 number.The value must be of length 3 to 15 digits

S O

GRES Restriction on the Gateway Mobile Location Center (GMLC).

Only valid values are YES or NO

S O

ALLPCL All location services privacy class.

Only valid values are YES or NO

S O

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 252: A_ERIC-HLR_R12-0_REM_LOC-SERVICES

Parameter Name Description RangeDefault Value

Type Class

Page 355: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 341

HGLDE:MSISDN=<msisdn>,PLMNO[,INTID=<intid>]; or HGLDE:MSISDN=<msisdn>,ALLPCL; or HGLDE:MSISDN=<msisdn>,MOCL=<mocl>; or HGLDE:MSISDN=<msisdn>,MOCL=ALL; or HGLDE:MSISDN=<msisdn>,SERVT=<servt>[,GRES];

where<msisdn> = MSISDN

CREL = Call related Location services privacy class

CUNRL = Call Unrelated location services privacy class

PLMNO = PLMN Operator location services privacy class

<intid> = Internal Identity List

UNIV = Universal location services privacy class

<mocl> = Location services Mobile Originating Class List

<eadd> = External location services client Address

<servt> = Service Type

<gres> = Restriction on the Gateway Mobile Location Center

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_REM_LOC-SERVICES_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_REM_LOC-SERVICES_RETURN_INFO = <NE error code>:<NE error description>

A_ERIC-HLR_R12-0_REM_SPNRemoves the single personal number feature. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.remSPN.

Table 253: A_ERIC-HLR_R12-0_REM_SPN

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

Page 356: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

342 Oracle Corporation

MML commandsHGSSE:MSISDN=<msisdn>,SS=SPN[,BSG=<bsg>][,KEEP];

where <msisdn> = MSISDN

<bsg> = Basic Subscriber Group

KEEP = Keep subscriber data

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_REM_SPN_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_REM_SPN_RETURN_INFO = <NE error code>:<NE error description>

BSG Basic service group. S O

KEEP Flag to specify whether to keep subscriber data or not.

Y/N NO S O

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 253: A_ERIC-HLR_R12-0_REM_SPN

Parameter Name Description RangeDefault Value

Type Class

Page 357: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

ASDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 343

A_ERIC-HLR_R12-0_REM_SMS-SPAM-DATADeactivate Short Message Service Centre address series. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_r12_0.prov.HLRProvisioning.remSMSC.

MML commandsHGPSE:MSISDN=<msisdn>[,SCADDS=<scadds>];

where

<msisdn> = MSISDN.

<scadds> = Short Message Service Centre (SMSC) address series.

Output

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_REM_SMS-SPAM-DATA_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_REM_SMS-SPAM-DATA_RETURN_INFO = <NE error code>:<NE error description>

Table 254: A_ERIC-HLR_R12-0_REM_SMS-SPAM-DATA

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote Network Element Name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

SCADDS Short Message Service Centre address series.

S O

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes.

S O

Page 358: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

344 Oracle Corporation

A_ERIC-HLR_R12-0_RESET_LOCATIONSets the location of the mobile subscriber to unknown. It is implemented by the Java method com.metasolv.cartridge.oss.eric_hlr_R12_0.prov.HLRProvisioning.resetLocation.

MML commandsHGSLR:MSISDN=<msisdn>;

or

HGSLR:IMSI=<imsi>;

where<imsi> = IMSI

<msisdn> = MSISDN

Output parameters

Return as CSDL Parameter :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_RESET_LOCATION_UDET = <user defined exit type>

Return as info parameters :

<RETURN_DATA_PREFIX>A_ERIC-HLR_R12-0_RESET_LOCATION_RETURN_INFO = <NE error code>:<NE error description>

Table 255: A_ERIC-HLR_R12-0_RESET_LOCATION

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S O

IMSI IMSI S O

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 359: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

User exit types

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 345

User exit typesUser exit types allow cartridge developers and systems administrators to map ASDL exit codes to one of the predefined base exit types. Base exit types determine the product behavior. Cartridges map return codes and status values from a network element to a user defined exit type.

Regular expressions (regex) are used to perform pattern searches on responses from network elements. The pattern is stored in "tbl_user_err" in the SARM database. The user exit type contains a regex pattern that is applied at runtime.

Regular expressions enable users to associate a series of responses to a specific base type. For example, a regular expression "6." can identify a pattern where any response with the character "6" followed by any number of characters will translate to base type of FAIL.

Regular expressions can also allow very specific searches within a response from a network element. Regular expressions are typically compiled before being executed. Compilation produces a binary version of the expression and ensures that the syntax of the regular expression is correct. This compilation occurs using SACT\SADT when user exit types are deployed into ASAP. If the syntax is deemed to be incorrect during compilation, SADT displays an error message and the deployment of the user exit type will fail.

For more information on pattern matching, refer to the ASAP Developer Reference and the ASAP Administration Guide.

Understanding user exit type XML files…<userDefinedExitType>

<neDescriptor><softwareLoad>DYNAMIC_SL</softwareLoad><technology>DYNAMIC_VENDOR-DYNAMIC_TECH</technology>

</neDescriptor>

<searchPattern>SUCCESS.</searchPattern>1

<userType>U_SUCCEED</userType>2

<baseType>SUCCEED</baseType>3

<description>The ASDL provisioning was successful</description></userDefinedExitType>

1. Pattern searches accommodate situations in which responses from the device contain small variantsthat represent the same meaning. The user type contains an associated search pattern that is appliedat runtime. Using regular expressions, you can default a series of responses. For example a regularexpression "90." can specify a pattern where any response with the character "90" followed by anycharacter will translate to base type of FAIL. If the regular expression is defined as "90*", then anyresponse with the character "90" followed by any number of characters will translate to base type ofFAIL

2. The user type that the search pattern maps to.3. The base type that maps to the user type.

Page 360: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

346 Oracle Corporation

<userDefinedExitType><searchPattern>90.</searchPattern><userType>U_FAIL</userType><baseType>FAIL</baseType><description>The ASDL failed - fail the current order

and stop processing.</description></userDefinedExitType><userDefinedExitType>

<searchPattern>101-110[201-215]</searchPattern>1

<userType>U_SOFT_FAIL</userType><baseType>SOFT_FAIL</baseType><description>The ASDL has encountered a soft failure. Processing will

continue.</description></userDefinedExitType><userDefinedExitType>

<searchPattern>801-850</searchPattern>2

<userType>U_MINOR_ERROR</userType><baseType>SOFT_FAIL</baseType><description>The ASDL has encountered a soft failure. Processing will

continue.</description></userDefinedExitType><userDefinedExitType>

<searchPattern>251-275&&[^261-265]</searchPattern>3

<userType>U_DELAYED_FAIL</userType><baseType>DELAYED_FAIL</baseType><description>The ASDL has failed during provisioning.</description>

</userDefinedExitType><userDefinedExitType>

<neDescriptor><softwareLoad>BCS36</softwareLoad><technology>NORTEL_DMS</technology><neVendor>Nortel</neVendor>

</neDescriptor><searchPattern>*.</searchPattern><userType>U_MAINTAIN</userType><baseType>MAINTENANCE</baseType><description>The ASDL will Wait until the NE comes out of

Maintenance Mode</description></userDefinedExitType>

The previous code sample shows some typical search pattern examples. Some additional examples follow:

^.*\b(one|two|three)\b.*$ = matches a complete line of text that contains any of the words "one", "two" or "three"

1. 101 to 110 and 201 to 215 will translate to a base type of SOFT_FAIL2. 801-850 will translate to a base type of SOFT_FAIL. Note that the user type differs from the previ-

ous range.3. 251 to 275 but not 261 to 265 will translate to a base type of DELAYED_FAILURE.

Page 361: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

User defined ASDL exit types

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 347

^(?=.*?\bone\b)(?=.*?\btwo\b)(?=.*?\bthree\b).*$ matches a complete line of text that contains all of the words "one", "two" and "three""[^"\r\n]*" matches a single-line string that does not allow the quote character to appear inside the string.\b\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3}\b matches any IP address.

For more information on search patterns, refer to http://java.sun.com/j2se/1.4.2/docs/api/java/util/regex/Pattern.html.

For more information on user exit types, refer to chapter 3 of the ASAP Developer Reference.

User defined ASDL exit typesThe following table lists the user defined ASDL exit types.

Table 256: User defined ASDL exit types

Search pattern User_type Base_type Description

((?s).)*FORMAT ERROR((?s).)*

ERHLR_FORMAT_ERROR FAIL FORMAT ERROR

((?s).)*NOT EXECUTED((?s).)*

ERHLR_NOT_EXECUTED RETRY COMMAND NOT EXECUTED

((?s).)*UNREASONABLE VALUE((?s).)*

ERHLR_UNREASON_VALUE FAIL UNREASONABLE VALUE

((?s).)*PARTLY EXECUTED((?s).)*

ERHLR_PART_EXECUTED SOFT_FAIL PARTLY EXECUTED

((?s).)*ORDERED((?s).)*

ERHLR_ORDERED SUCCEED COMMAND ORDERED

((?s).)*EXECUTED((?s).)*

ERHLR_EXECUTED SUCCEED The command has been executed.

((?s).)*FUNCTION BUSY((?s).)*

ERHLR_FUNCTION_BUSY RETRY FUNCTION BUSY

((?s).)*NOT ACCEPTED((?s).)*

ERHLR_NOT_ACCEPTED FAIL COMMAND NOT ACCEPTED

((?s).)*ANSWER PRINTOUT((?s).)*

ERHLR_ANSWER_PRNTOUT SUCCEED HLR ANSWER PRINTOUT

Page 362: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

348 Oracle Corporation

((?s).)*Missing mandatory parameter((?s).)*

ERHLR_MASSCHG_EXTION SOFT_FAIL Some of the MML commands failed when provisioning.

((?s).)*IOException((?s).)*

ERHLR_IOEXCEPTION RETRY IO Exception.

((?s).)*TelnetException((?s).)*

ERHLR_TELNET_EXPTION RETRY Telnet Exception.

((?s).)*ProvCartridgeException((?s).)*

ERHLR_PROVCARTEXCEP FAIL Provisioning Cartridge Exception.

((?s).)*NO_UDET_MATCH((?s).)*

NO_UDET_MATCH FAIL No User Defined Exit Type Match.

((?s).)*Generic Exception((?s).)*

ERHLR_GEN_EXCEPTION FAIL Generic Exception.

((?s).)*END((?s).)* ERHLR_END SUCCEED Remote Host reply (END).

< ERHLR_LOOPBACK_OK SUCCEED Loopback testing only.

((?s).)*FAULT CODE( )+482((?s).)*

ERHLR_FCODE_482 FAIL NO SUBSCRIBER PPR ADDRESS DEFINED

((?s).)*FAULT CODE( )+481((?s).)*

ERHLR_FCODE_481 FAIL NO SUBSCRIBER HGMLC ADDRESS DEFINED

((?s).)*FAULT CODE( )+438((?s).)*

ERHLR_FCODE_438 FAIL PDP ADDRESS INCOMPATIBLE WITH PDP TYPE

((?s).)*FAULT CODE( )+415((?s).)*

ERHLR_FCODE_415 FAIL SUBSCRIBER GMLC ADDRESS ALREADY GIVEN IN COMMAND

((?s).)*FAULT CODE( )+413((?s).)*

ERHLR_FCODE_413 FAIL NO VALID ORIGINATING CAMEL SUBSCRIPTION DEFINED

((?s).)*FAULT CODE( )+411((?s).)*

ERHLR_FCODE_411 FAIL NO MMTDP DEFINED

Table 256: User defined ASDL exit types

Search pattern User_type Base_type Description

Page 363: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

User defined ASDL exit types

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 349

((?s).)*FAULT CODE( )+400((?s).)*

ERHLR_FCODE_400 FAIL TRIGGER DETECTION POINT INCLUDED MORE THAN ONCE

((?s).)*FAULT CODE( )+399((?s).)*

ERHLR_FCODE_399 FAIL MAXIMUM NUMBER OF VTTDP REACHED

((?s).)*FAULT CODE( )+398((?s).)*

ERHLR_FCODE_398 FAIL TOO MANY VTTDP SPECIFIED

((?s).)*FAULT CODE( )+397((?s).)*

ERHLR_FCODE_397 FAIL VTTDP NOT DEFINED

((?s).)*FAULT CODE( )+396((?s).)*

ERHLR_FCODE_396 FAIL STORAGE SHORTAGE IN VMSC TERMINATING CAMEL PHASE 3 DATA FILE

((?s).)*FAULT CODE( )+395((?s).)*

ERHLR_FCODE_395 FAIL STORAGE SHORTAGE IN TERMINATING CAMEL PHASE 3 DATA FILE

((?s).)*FAULT CODE( )+394((?s).)*

ERHLR_FCODE_394 FAIL STORAGE SHORTAGE IN ORIGINATING CAMEL PHASE 3 DATA FILE

((?s).)*FAULT CODE( )+393((?s).)*

ERHLR_FCODE_393 FAIL VTTDP VALUE NOT ALLOWED

((?s).)*FAULT CODE( )+392((?s).)*

ERHLR_FCODE_392 FAIL VTTDP ALREADY DEFINED

((?s).)*FAULT CODE( )+391((?s).)*

ERHLR_FCODE_391 FAIL CCH VALUE NOT ALLOWED FOR THIS TDP VALUE

((?s).)*FAULT CODE( )+389((?s).)*

ERHLR_FCODE_389 FAIL STORAGE SHORTAGE IN IPV6 ADDRESS DATA FILE

((?s).)*FAULT CODE( )+367((?s).)*

ERHLR_FCODE_367 FAIL DEH NOT APPLICABLE FOR THIS TYPE OF TDP

((?s).)*FAULT CODE( )+345((?s).)*

ERHLR_FCODE_345 FAIL DSTDP NOT DEFINED

Table 256: User defined ASDL exit types

Search pattern User_type Base_type Description

Page 364: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

350 Oracle Corporation

((?s).)*FAULT CODE( )+344((?s).)*

ERHLR_FCODE_344 FAIL STORAGE SHORTAGE IN DIALLED SERVICES CAMEL DATA FILE

((?s).)*FAULT CODE( )+342((?s).)*

ERHLR_FCODE_342 FAIL DSTDP ALREADY DEFINED

((?s).)*FAULT CODE( )+341((?s).)*

ERHLR_FCODE_341 FAIL TOO MANY MMTDP SPECIFIED

((?s).)*FAULT CODE( )+340((?s).)*

ERHLR_FCODE_340 FAIL DIALNUM ALREADY DEFINED

((?s).)*FAULT CODE( )+339((?s).)*

ERHLR_FCODE_339 FAIL MMTDP NOT DEFINED

((?s).)*FAULT CODE( )+338((?s).)*

ERHLR_FCODE_338 FAIL GSA ALREADY DEFINED

((?s).)*FAULT CODE( )+337((?s).)*

ERHLR_FCODE_337 FAIL SERVICE KEY NOT SPECIFIED

((?s).)*FAULT CODE( )+336((?s).)*

ERHLR_FCODE_336 FAIL GSA NOT SPECIFIED

((?s).)*FAULT CODE( )+335((?s).)*

ERHLR_FCODE_335 FAIL STORAGE SHORTAGE IN MOBILITY MANAGEMENT CAMEL DATA FILE

((?s).)*FAULT CODE( )+334((?s).)*

ERHLR_FCODE_334 FAIL MAXIMUM NUMBER OF MMTDP REACHED

((?s).)*FAULT CODE( )+333((?s).)*

ERHLR_FCODE_333 FAIL MMTDP ALREADY DEFINED

((?s).)*FAULT CODE( )+332((?s).)*

ERHLR_FCODE_332 FAIL MMTDP VALUE NOT ALLOWED

((?s).)*FAULT CODE( )+331((?s).)*

ERHLR_FCODE_331 FAIL SERVICE KEY ALREADY DEFINED

((?s).)*FAULT CODE( )+330((?s).)*

ERHLR_FCODE_330 FAIL TSMSTDP NOT DEFINED

Table 256: User defined ASDL exit types

Search pattern User_type Base_type Description

Page 365: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

User defined ASDL exit types

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 351

((?s).)*FAULT CODE( )+329((?s).)*

ERHLR_FCODE_329 FAIL TOO MANY TSMSTDP SPECIFIED

((?s).)*FAULT CODE( )+328((?s).)*

ERHLR_FCODE_328 FAIL STORAGE SHORTAGE IN TERMINATING SMS CAMEL DATA FILE

((?s).)*FAULT CODE( )+327((?s).)*

ERHLR_FCODE_327 FAIL MAXIMUM NUMBER OF TSMSTDP REACHED

((?s).)*FAULT CODE( )+326((?s).)*

ERHLR_FCODE_326 FAIL TSMSTDP ALREADY DEFINED

((?s).)*FAULT CODE( )+325((?s).)*

ERHLR_FCODE_325 FAIL TSMSTDP VALUE NOT ALLOWED

((?s).)*FAULT CODE( )+318((?s).)*

ERHLR_FCODE_318 FAIL APN IDENTIFIER OUT OF RANGE

((?s).)*FAULT CODE( )+317((?s).)*

ERHLR_FCODE_317 FAIL STORAGE SHORTAGE IN APN DATA FILE

((?s).)*FAULT CODE( )+316((?s).)*

ERHLR_FCODE_316 FAIL STATIC ADDRESSING NOT ALLOWED FOR PDP CONTEXT TYPE

((?s).)*FAULT CODE( )+315((?s).)*

ERHLR_FCODE_315 FAIL PDP TYPE INCOMPATIBLE WITH EXTENDED QOS

((?s).)*FAULT CODE( )+314((?s).)*

ERHLR_FCODE_314 FAIL EXTENDED QOS NOT DEFINED

((?s).)*FAULT CODE( )+309((?s).)*

ERHLR_FCODE_309 FAIL TOO MANY OSMSTDP SPECIFIED

((?s).)*FAULT CODE( )+308((?s).)*

ERHLR_FCODE_308 FAIL OSMSTDP NOT DEFINED

((?s).)*FAULT CODE( )+307((?s).)*

ERHLR_FCODE_307 FAIL OSMSTDP VALUE NOT ALLOWED

((?s).)*FAULT CODE( )+306((?s).)*

ERHLR_FCODE_306 FAIL MAXIMUM NUMBER OF OSMSTDP REACHED

Table 256: User defined ASDL exit types

Search pattern User_type Base_type Description

Page 366: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

352 Oracle Corporation

((?s).)*FAULT CODE( )+305((?s).)*

ERHLR_FCODE_305 FAIL OSMSTDP ALREADY DEFINED

((?s).)*FAULT CODE( )+304((?s).)*

ERHLR_FCODE_304 FAIL STORAGE SHORTAGE IN ORIGINATING SMS CAMEL DATA FILE

((?s).)*FAULT CODE( )+303((?s).)*

ERHLR_FCODE_303 FAIL SUBSCRIBER GMLC ADDRESS NOT DEFINED

((?s).)*FAULT CODE( )+287((?s).)*

ERHLR_FCODE_287 FAIL NO SUBSCRIBER GMLC ADDRESSES DEFINED

((?s).)*FAULT CODE( )+281((?s).)*

ERHLR_FCODE_281 FAIL UPDATING OF SUBSCRIBER LCS DATA IN PROGRESS

((?s).)*FAULT CODE( )+278((?s).)*

ERHLR_FCODE_278 FAIL TOO MANY GPRSTDP SPECIFIED

((?s).)*FAULT CODE( )+277((?s).)*

ERHLR_FCODE_277 FAIL GPRSTDP NOT DEFINED

((?s).)*FAULT CODE( )+276((?s).)*

ERHLR_FCODE_276 FAIL GPRSTDP VALUE NOT ALLOWED

((?s).)*FAULT CODE( )+275((?s).)*

ERHLR_FCODE_275 FAIL CCH VALUE NOT ALLOWED FOR THIS TYPE OF TDP

((?s).)*FAULT CODE( )+274((?s).)*

ERHLR_FCODE_274 FAIL I NOT APPLICABLE FOR THIS TYPE OF TDP

((?s).)*FAULT CODE( )+273((?s).)*

ERHLR_FCODE_273 FAIL MAXIMUM NUMBER OF GPRSTDP REACHED

((?s).)*FAULT CODE( )+272((?s).)*

ERHLR_FCODE_272 FAIL GPRSTDP ALREADY DEFINED

((?s).)*FAULT CODE( )+271((?s).)*

ERHLR_FCODE_271 FAIL STORAGE SHORTAGE IN GPRS CAMEL PHASE 3 DATA FILE

((?s).)*FAULT CODE( )+270((?s).)*

ERHLR_FCODE_270 FAIL STORAGE SHORTAGE IN QUINTET DATA FILE

Table 256: User defined ASDL exit types

Search pattern User_type Base_type Description

Page 367: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

User defined ASDL exit types

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 353

((?s).)*FAULT CODE( )+269((?s).)*

ERHLR_FCODE_269 FAIL STORAGE SHORTAGE IN TRIPLET DATA FILE

((?s).)*FAULT CODE( )+268((?s).)*

ERHLR_FCODE_268 FAIL STORAGE SHORTAGE IN TERMINATING CAMEL PHASE 1 DATA FILE

((?s).)*FAULT CODE( )+267((?s).)*

ERHLR_FCODE_267 FAIL STORAGE SHORTAGE IN ORIGINATING CAMEL PHASE 1 DATA FILE

((?s).)*FAULT CODE( )+266((?s).)*

ERHLR_FCODE_266 FAIL Ericsson HLR FAULT CODE 266

((?s).)*FAULT CODE( )+265((?s).)*

ERHLR_FCODE_265 FAIL STORAGE SHORTAGE IN BSG FOR AUXILIARY SPEECH SERVICES DATA FILE

((?s).)*FAULT CODE( )+264((?s).)*

ERHLR_FCODE_264 FAIL SGSN NUMBER NOT FOUND

((?s).)*FAULT CODE( )+263((?s).)*

ERHLR_FCODE_263 FAIL LAST OCTDP REMOVAL NOT ALLOWED

((?s).)*FAULT CODE( )+262((?s).)*

ERHLR_FCODE_262 FAIL Ericsson HLR FAULT CODE 262

((?s).)*FAULT CODE( )+261((?s).)*

ERHLR_FCODE_261 FAIL STORAGE SHORTAGE IN TERMINATING CAMEL PHASE 2 DATA FILE

((?s).)*FAULT CODE( )+260((?s).)*

ERHLR_FCODE_260 FAIL STORAGE SHORTAGE IN ORIGINATING CAMEL PHASE 2 DATA FILE

((?s).)*FAULT CODE( )+259((?s).)*

ERHLR_FCODE_259 FAIL OFA VALUE NOT ALLOWED

((?s).)*FAULT CODE( )+258((?s).)*

ERHLR_FCODE_258 FAIL STORAGE SHORTAGE IN ZONE CODE DATA FILE

((?s).)*FAULT CODE( )+257((?s).)*

ERHLR_FCODE_257 FAIL FILE INPUT IN PROGRESS

Table 256: User defined ASDL exit types

Search pattern User_type Base_type Description

Page 368: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

354 Oracle Corporation

((?s).)*FAULT CODE( )+256((?s).)*

ERHLR_FCODE_256 FAIL Ericsson HLR FAULT CODE 256

((?s).)*FAULT CODE( )+255((?s).)*

ERHLR_FCODE_255 FAIL LOG DATA FILE DOES NOT EXIST

((?s).)*FAULT CODE( )+254((?s).)*

ERHLR_FCODE_254 FAIL FILE INPUT PROCESS NOT INITIATED

((?s).)*FAULT CODE( )+253((?s).)*

ERHLR_FCODE_253 FAIL Ericsson HLR FAULT CODE 253

((?s).)*FAULT CODE( )+252((?s).)*

ERHLR_FCODE_252 FAIL Ericsson HLR FAULT CODE 252

((?s).)*FAULT CODE( )+251((?s).)*

ERHLR_FCODE_251 FAIL Ericsson HLR FAULT CODE 251

((?s).)*FAULT CODE( )+250((?s).)*

ERHLR_FCODE_250 FAIL Ericsson HLR FAULT CODE 250

((?s).)*FAULT CODE( )+249((?s).)*

ERHLR_FCODE_249 FAIL Ericsson HLR FAULT CODE 249

((?s).)*FAULT CODE( )+248((?s).)*

ERHLR_FCODE_248 FAIL Ericsson HLR FAULT CODE 248

((?s).)*FAULT CODE( )+247((?s).)*

ERHLR_FCODE_247 FAIL Ericsson HLR FAULT CODE 247

((?s).)*FAULT CODE( )+246((?s).)*

ERHLR_FCODE_246 FAIL STORAGE SHORTAGE IN SUBADDRESS DATA FILE FOR AUXILIARY SPEECH

((?s).)*FAULT CODE( )+245((?s).)*

ERHLR_FCODE_245 FAIL STORAGE SHORTAGE IN SUBADDRESS DATA FILE FOR FACSIMILE

((?s).)*FAULT CODE( )+244((?s).)*

ERHLR_FCODE_244 FAIL STORAGE SHORTAGE IN SUBADDRESS DATA FILE FOR DATA CIRCUIT SYNCHRONOUS

Table 256: User defined ASDL exit types

Search pattern User_type Base_type Description

Page 369: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

User defined ASDL exit types

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 355

((?s).)*FAULT CODE( )+243((?s).)*

ERHLR_FCODE_243 FAIL STORAGE SHORTAGE IN SUBADDRESS DATA FILE FOR DATA CIRCUIT ASYNCHRONOUS

((?s).)*FAULT CODE( )+242((?s).)*

ERHLR_FCODE_242 FAIL STORAGE SHORTAGE IN SUBADDRESS DATA FILE FOR SPEECH

((?s).)*FAULT CODE( )+241((?s).)*

ERHLR_FCODE_241 FAIL NO GMLC ADDRESSES DEFINED

((?s).)*FAULT CODE( )+240((?s).)*

ERHLR_FCODE_240 FAIL GMLC ADDRESS NOT DEFINED

((?s).)*FAULT CODE( )+239((?s).)*

ERHLR_FCODE_239 FAIL MAXIMUM NUMBER OF GMLC ADDRESSES DEFINED REACHED

((?s).)*FAULT CODE( )+238((?s).)*

ERHLR_FCODE_238 FAIL GMLC ADDRESS ALREADY DEFINED

((?s).)*FAULT CODE( )+237((?s).)*

ERHLR_FCODE_237 FAIL Ericsson HLR FAULT CODE 237

((?s).)*FAULT CODE( )+236((?s).)*

ERHLR_FCODE_236 FAIL UPDATING SUBSCRIBER TRACE DATA IN PROGRESS

((?s).)*FAULT CODE( )+235((?s).)*

ERHLR_FCODE_235 FAIL Ericsson HLR FAULT CODE 235

((?s).)*FAULT CODE( )+234((?s).)*

ERHLR_FCODE_234 FAIL Ericsson HLR FAULT CODE 234

((?s).)*FAULT CODE( )+233((?s).)*

ERHLR_FCODE_233 FAIL Ericsson HLR FAULT CODE 233

((?s).)*FAULT CODE( )+232((?s).)*

ERHLR_FCODE_232 FAIL TRACE DATA NOT INITIATED FOR THIS IMSI

((?s).)*FAULT CODE( )+231((?s).)*

ERHLR_FCODE_231 FAIL Ericsson HLR FAULT CODE 231

((?s).)*FAULT CODE( )+230((?s).)*

ERHLR_FCODE_230 FAIL Ericsson HLR FAULT CODE 230

Table 256: User defined ASDL exit types

Search pattern User_type Base_type Description

Page 370: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

356 Oracle Corporation

((?s).)*FAULT CODE( )+229((?s).)*

ERHLR_FCODE_229 FAIL Ericsson HLR FAULT CODE 229

((?s).)*FAULT CODE( )+228((?s).)*

ERHLR_FCODE_228 FAIL Ericsson HLR FAULT CODE 228

((?s).)*FAULT CODE( )+227((?s).)*

ERHLR_FCODE_227 FAIL Ericsson HLR FAULT CODE 227

((?s).)*FAULT CODE( )+226((?s).)*

ERHLR_FCODE_226 FAIL Ericsson HLR FAULT CODE 226

((?s).)*FAULT CODE( )+225((?s).)*

ERHLR_FCODE_225 FAIL Ericsson HLR FAULT CODE 225

((?s).)*FAULT CODE( )+224((?s).)*

ERHLR_FCODE_224 FAIL Ericsson HLR FAULT CODE 224

((?s).)*FAULT CODE( )+223((?s).)*

ERHLR_FCODE_223 FAIL Ericsson HLR FAULT CODE 223

((?s).)*FAULT CODE( )+222((?s).)*

ERHLR_FCODE_222 FAIL PDP CONTEXT NOT DEFINED

((?s).)*FAULT CODE( )+221((?s).)*

ERHLR_FCODE_221 FAIL SUBSCRIBER DATA INCOMPATIBLE WITH STORED SUBSCRIBER DATA

((?s).)*FAULT CODE( )+220((?s).)*

ERHLR_FCODE_220 FAIL SUBSCRIBER NETWORK ACCESS MODE HAS ALREADY THAT VALUE

((?s).)*FAULT CODE( )+219((?s).)*

ERHLR_FCODE_219 FAIL SUBSCRIBER PDP CONTEXT IDENTIFIER REPEATED

((?s).)*FAULT CODE( )+218((?s).)*

ERHLR_FCODE_218 FAIL UPDATING OF SUBSCRIBER PDP CONTEXT IN PROGRESS

((?s).)*FAULT CODE( )+217((?s).)*

ERHLR_FCODE_217 FAIL SUBSCRIBER PDP CONTEXT WITH NON SUBSCRIBED APN ALREADY DEFINED

((?s).)*FAULT CODE( )+216((?s).)*

ERHLR_FCODE_216 FAIL SUBSCRIBER PDP CONTEXT ALREADY DEFINED

Table 256: User defined ASDL exit types

Search pattern User_type Base_type Description

Page 371: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

User defined ASDL exit types

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 357

((?s).)*FAULT CODE( )+215((?s).)*

ERHLR_FCODE_215 FAIL MAXIMUM NUMBER OF SUBSCRIBER PDP CONTEXT REACHED

((?s).)*FAULT CODE( )+214((?s).)*

ERHLR_FCODE_214 SOFT_FAIL APN ALREADY DEFINED

((?s).)*FAULT CODE( )+213((?s).)*

ERHLR_FCODE_213 FAIL Ericsson HLR FAULT CODE 213

((?s).)*FAULT CODE( )+212((?s).)*

ERHLR_FCODE_212 FAIL APN IN USE

((?s).)*FAULT CODE( )+211((?s).)*

ERHLR_FCODE_211 FAIL APN NOT DEFINED

((?s).)*FAULT CODE( )+210((?s).)*

ERHLR_FCODE_210 DELAYED_FAIL

APN NOT VALID

((?s).)*FAULT CODE( )+209((?s).)*

ERHLR_FCODE_209 DELAYED_FAIL

APN IDENTIFIER IN USE

((?s).)*FAULT CODE( )+208((?s).)*

ERHLR_FCODE_208 FAIL BS3G FOR BS3F NOT DEFINED IN THE PROFILE

((?s).)*FAULT CODE( )+207((?s).)*

ERHLR_FCODE_207 FAIL BS2G FOR BS2F NOT DEFINED IN THE PROFILE

((?s).)*FAULT CODE( )+206((?s).)*

ERHLR_FCODE_206 FAIL Ericsson HLR FAULT CODE 206

((?s).)*FAULT CODE( )+205((?s).)*

ERHLR_FCODE_205 FAIL Ericsson HLR FAULT CODE 205

((?s).)*FAULT CODE( )+204((?s).)*

ERHLR_FCODE_204 FAIL NO TERMINATING CAMEL SUBSCRIPTION DEFINED

((?s).)*FAULT CODE( )+203((?s).)*

ERHLR_FCODE_203 FAIL NO ORIGINATING CAMEL SUBSCRIPTION DEFINED

((?s).)*FAULT CODE( )+202((?s).)*

ERHLR_FCODE_202 FAIL TOO MANY OCTDP SPECIFIED

((?s).)*FAULT CODE( )+201((?s).)*

ERHLR_FCODE_201 FAIL NO SUBSCRIBER WITH THE GIVEN CONDITIONS

Table 256: User defined ASDL exit types

Search pattern User_type Base_type Description

Page 372: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

358 Oracle Corporation

((?s).)*FAULT CODE( )+200((?s).)*

ERHLR_FCODE_200 FAIL MAXIMUM NUMBER OF GPRS SUBSCRIPTIONS EXCEEDED

((?s).)*FAULT CODE( )+199((?s).)*

ERHLR_FCODE_199 FAIL MAXIMUM NUMBER OF SUBSCRIPTIONS EXCEEDED

((?s).)*FAULT CODE( )+198((?s).)*

ERHLR_FCODE_198 FAIL MAXIMUM NUMBER OF OCTDP REACHED

((?s).)*FAULT CODE( )+197((?s).)*

ERHLR_FCODE_197 FAIL MAXIMUM NUMBER OF TCTDP REACHED

((?s).)*FAULT CODE( )+196((?s).)*

ERHLR_FCODE_196 FAIL OCTDP ALREADY DEFINED

((?s).)*FAULT CODE( )+195((?s).)*

ERHLR_FCODE_195 FAIL TCTDP ALREADY DEFINED

((?s).)*FAULT CODE( )+194((?s).)*

ERHLR_FCODE_194 FAIL OCTDP VALUE NOT ALLOWED

((?s).)*FAULT CODE( )+193((?s).)*

ERHLR_FCODE_193 FAIL TCTDP VALUE NOT ALLOWED

((?s).)*FAULT CODE( )+192((?s).)*

ERHLR_FCODE_192 FAIL TOO MANY TCTDP SPECIFIED

((?s).)*FAULT CODE( )+191((?s).)*

ERHLR_FCODE_191 FAIL OCTDP NOT DEFINED

((?s).)*FAULT CODE( )+190((?s).)*

ERHLR_FCODE_190 FAIL TCTDP NOT DEFINED

((?s).)*FAULT CODE( )+189((?s).)*

ERHLR_FCODE_189 FAIL PARAMETER VALUE NOT SUPPORTED BY THIS EXCHANGE

((?s).)*FAULT CODE( )+188((?s).)*

ERHLR_FCODE_188 FAIL CAMEL SUBSCRIPTION DATA NOT DEFINED

((?s).)*FAULT CODE( )+187((?s).)*

ERHLR_FCODE_187 FAIL UPDATING CAMEL SUBSCRIPTION DATA IN PROGRESS

Table 256: User defined ASDL exit types

Search pattern User_type Base_type Description

Page 373: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

User defined ASDL exit types

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 359

((?s).)*FAULT CODE( )+186((?s).)*

ERHLR_FCODE_186 FAIL GSA IN USE

((?s).)*FAULT CODE( )+185((?s).)*

ERHLR_FCODE_185 FAIL GSA ALREADY DEFINED

((?s).)*FAULT CODE( )+184((?s).)*

ERHLR_FCODE_184 FAIL MAXIMUM NUMBER OF GSA DEFINED REACHED

((?s).)*FAULT CODE( )+183((?s).)*

ERHLR_FCODE_183 FAIL PARAMETER NOT SUPPORTED BY THIS EXCHANGE

((?s).)*FAULT CODE( )+182((?s).)*

ERHLR_FCODE_182 FAIL GENERAL BEARER SERVICE NOT SUBSCRIBED

((?s).)*FAULT CODE( )+181((?s).)*

ERHLR_FCODE_181 FAIL BS REPRESENTED BY BC NOT WITHIN THE SAME BSG

((?s).)*FAULT CODE( )+180((?s).)*

ERHLR_FCODE_180 FAIL Ericsson HLR FAULT CODE 180

((?s).)*FAULT CODE( )+179((?s).)*

ERHLR_FCODE_179 FAIL MASSIVE CHANGE OF SUBSCRIBER DATA NOT IN PROGRESS

((?s).)*FAULT CODE( )+178((?s).)*

ERHLR_FCODE_178 FAIL MASSIVE CHANGE OF SUBSCRIBER DATA IN PROGRESS

((?s).)*FAULT CODE( )+177((?s).)*

ERHLR_FCODE_177 FAIL CONDITIONAL SUBSCRIBER LIST PRINTOUT IN PROGRESS

((?s).)*FAULT CODE( )+176((?s).)*

ERHLR_FCODE_176 FAIL NEW SUBSCRIBER DATA VALUE INCOMPATIBLE

((?s).)*FAULT CODE( )+175((?s).)*

ERHLR_FCODE_175 FAIL GSA NOT DEFINED

((?s).)*FAULT CODE( )+174((?s).)*

ERHLR_FCODE_174 FAIL TOO MANY DETECTION POINTS SPECIFIED

Table 256: User defined ASDL exit types

Search pattern User_type Base_type Description

Page 374: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

360 Oracle Corporation

((?s).)*FAULT CODE( )+173((?s).)*

ERHLR_FCODE_173 FAIL MAXIMUM NUMBER OF DETECTION POINTS EXCEEDED

((?s).)*FAULT CODE( )+172((?s).)*

ERHLR_FCODE_172 FAIL DP VALUE NOT ALLOWED

((?s).)*FAULT CODE( )+171((?s).)*

ERHLR_FCODE_171 FAIL DP NOT ACTIVATED

((?s).)*FAULT CODE( )+170((?s).)*

ERHLR_FCODE_170 FAIL DP ACTIVATED

((?s).)*FAULT CODE( )+169((?s).)*

ERHLR_FCODE_169 FAIL DP NOT DEFINED

((?s).)*FAULT CODE( )+168((?s).)*

ERHLR_FCODE_168 FAIL DP ALREADY DEFINED

((?s).)*FAULT CODE( )+167((?s).)*

ERHLR_FCODE_167 FAIL UPDATING MOBILITY MANAGEMENT IN TRIGGER DATA IN PROGRESS

((?s).)*FAULT CODE( )+166((?s).)*

ERHLR_FCODE_166 FAIL Ericsson HLR FAULT CODE 166

((?s).)*FAULT CODE( )+165((?s).)*

ERHLR_FCODE_165 FAIL PARAMETER REDHLR NOT SUPPORTED BY THIS EXCHANGE

((?s).)*FAULT CODE( )+164((?s).)*

ERHLR_FCODE_164 FAIL Ericsson HLR FAULT CODE 164

((?s).)*FAULT CODE( )+163((?s).)*

ERHLR_FCODE_163 FAIL OPERATION NOT ALLOWED DUE TO CURRENT STATE

((?s).)*FAULT CODE( )+162((?s).)*

ERHLR_FCODE_162 FAIL REDUNDANCY NOT INITIATED

((?s).)*FAULT CODE( )+161((?s).)*

ERHLR_FCODE_161 FAIL HLR ALREADY HANDLING TRAFFIC

((?s).)*FAULT CODE( )+160((?s).)*

ERHLR_FCODE_160 FAIL REDUNDANCY ALREADY INITIATED

Table 256: User defined ASDL exit types

Search pattern User_type Base_type Description

Page 375: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

User defined ASDL exit types

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 361

((?s).)*FAULT CODE( )+159((?s).)*

ERHLR_FCODE_159 FAIL BC NOT PERMITTED

((?s).)*FAULT CODE( )+158((?s).)*

ERHLR_FCODE_158 FAIL Ericsson HLR FAULT CODE 158

((?s).)*FAULT CODE( )+157((?s).)*

ERHLR_FCODE_157 FAIL Ericsson HLR FAULT CODE 157

((?s).)*FAULT CODE( )+156((?s).)*

ERHLR_FCODE_156 FAIL Ericsson HLR FAULT CODE 156

((?s).)*FAULT CODE( )+155((?s).)*

ERHLR_FCODE_155 FAIL STORAGE SHORTAGE IN LOG DATA FILE

((?s).)*FAULT CODE( )+154((?s).)*

ERHLR_FCODE_154 FAIL STORAGE SHORTAGE IN DATA CIRCUIT SYNCHRONOUS DATA FILE

((?s).)*FAULT CODE( )+153((?s).)*

ERHLR_FCODE_153 FAIL STORAGE SHORTAGE IN DATA CIRCUIT ASYNCHRONOUS DATA FILE

((?s).)*FAULT CODE( )+152((?s).)*

ERHLR_FCODE_152 FAIL Ericsson HLR FAULT CODE 152

((?s).)*FAULT CODE( )+151((?s).)*

ERHLR_FCODE_151 FAIL STORAGE SHORTAGE IN FACSIMILE TRANSMISSION DATA FILE

((?s).)*FAULT CODE( )+150((?s).)*

ERHLR_FCODE_150 FAIL STORAGE SHORTAGE IN PDP CONTEXT DATA FILE

((?s).)*FAULT CODE( )+149((?s).)*

ERHLR_FCODE_149 FAIL STORAGE SHORTAGE IN GPRS DATA FILE

((?s).)*FAULT CODE( )+148((?s).)*

ERHLR_FCODE_148 FAIL ENAP NOT INITIATED

((?s).)*FAULT CODE( )+147((?s).)*

ERHLR_FCODE_147 FAIL ENAP ALREADY INITIATED

((?s).)*FAULT CODE( )+146((?s).)*

ERHLR_FCODE_146 FAIL TOO MANY NOTIFICATION CASES SPECIFIED

Table 256: User defined ASDL exit types

Search pattern User_type Base_type Description

Page 376: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

362 Oracle Corporation

((?s).)*FAULT CODE( )+145((?s).)*

ERHLR_FCODE_145 FAIL NO TEMPORARY USSD TEXT STRING DATA

((?s).)*FAULT CODE( )+144((?s).)*

ERHLR_FCODE_144 FAIL NO USSD TEXT STRING TO ACTIVATE

((?s).)*FAULT CODE( )+143((?s).)*

ERHLR_FCODE_143 FAIL SPECIFICATION PROCEDURE IN PROGRESS

((?s).)*FAULT CODE( )+142((?s).)*

ERHLR_FCODE_142 FAIL MAXIMUM USSD TEXT STRING LENGTH EXCEEDED

((?s).)*FAULT CODE( )+141((?s).)*

ERHLR_FCODE_141 FAIL SPECIFICATION PROCEDURE NOT INITIATED

((?s).)*FAULT CODE( )+140((?s).)*

ERHLR_FCODE_140 FAIL NOTIFICATION CASE DOES NOT EXIST

((?s).)*FAULT CODE( )+139((?s).)*

ERHLR_FCODE_139 FAIL ALPHABET NOT SUPPORTED

((?s).)*FAULT CODE( )+138((?s).)*

ERHLR_FCODE_138 FAIL USSD APPLICATION NOT KNOWN BY USSD TEXT STRING ADMINISTRATION FUNCTION

((?s).)*FAULT CODE( )+137((?s).)*

ERHLR_FCODE_137 FAIL Ericsson HLR FAULT CODE 137

((?s).)*FAULT CODE( )+136((?s).)*

ERHLR_FCODE_136 FAIL VLR ADDRESS NOT FOUND

((?s).)*FAULT CODE( )+135((?s).)*

ERHLR_FCODE_135 FAIL PRIVATE TAG DATA MISMATCH

((?s).)*FAULT CODE( )+134((?s).)*

ERHLR_FCODE_134 FAIL PRIVATE TAG NOT DEFINED

((?s).)*FAULT CODE( )+133((?s).)*

ERHLR_FCODE_133 FAIL SPECIFIC DATA AREA IDENTITY NOT DEFINED

((?s).)*FAULT CODE( )+132((?s).)*

ERHLR_FCODE_132 FAIL PLMN SPECIFIC SUPPLEMENTARY SERVICE DATA MISMATCH

Table 256: User defined ASDL exit types

Search pattern User_type Base_type Description

Page 377: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

User defined ASDL exit types

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 363

((?s).)*FAULT CODE( )+131((?s).)*

ERHLR_FCODE_131 FAIL PLMN SPECIFIC SUPPLEMENTARY SERVICE NOT DEFINED

((?s).)*FAULT CODE( )+130((?s).)*

ERHLR_FCODE_130 FAIL PRIVATE TAG ALREADY DEFINED

((?s).)*FAULT CODE( )+129((?s).)*

ERHLR_FCODE_129 FAIL PRIVATE TAG NOT RECOGNIZED

((?s).)*FAULT CODE( )+128((?s).)*

ERHLR_FCODE_128 FAIL PLMN SPECIFIC SUPPLEMENTARY SERVICE CODE ALREADY DEFINED

((?s).)*FAULT CODE( )+127((?s).)*

ERHLR_FCODE_127 FAIL PLMN SPECIFIC SUPPLEMENTARY SERVICE ALREADY DEFINED.

((?s).)*FAULT CODE( )+126((?s).)*

ERHLR_FCODE_126 FAIL PLMN SPECIFIC SUPPLEMENTARY SERVICE NOT RECOGNIZED.

((?s).)*FAULT CODE( )+125((?s).)*

ERHLR_FCODE_125 FAIL SUBSCRIBER ASSOCIATED TO THE PICI.

((?s).)*FAULT CODE( )+124((?s).)*

ERHLR_FCODE_124 FAIL MAXIMUM NUMBER OF IXC REACHED.

((?s).)*FAULT CODE( )+123((?s).)*

ERHLR_FCODE_123 FAIL IXC IS ASSIGNED TO A PICI.

((?s).)*FAULT CODE( )+122((?s).)*

ERHLR_FCODE_122 FAIL PICI-IXC RELATION DOES NOT EXIST.

((?s).)*FAULT CODE( )+121((?s).)*

ERHLR_FCODE_121 FAIL CIC NOT ASSIGNED.

((?s).)*FAULT CODE( )+120((?s).)*

ERHLR_FCODE_120 FAIL CIC ALREADY ASSIGNED

((?s).)*FAULT CODE( )+119((?s).)*

ERHLR_FCODE_119 FAIL IXC NOT DEFINED

((?s).)*FAULT CODE( )+118((?s).)*

ERHLR_FCODE_118 FAIL IXC ALREADY DEFINED

Table 256: User defined ASDL exit types

Search pattern User_type Base_type Description

Page 378: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

364 Oracle Corporation

((?s).)*FAULT CODE( )+117((?s).)*

ERHLR_FCODE_117 FAIL COLLECTIVE BASIC SERVICE GROUP NOT ALLOWED

((?s).)*FAULT CODE( )+116((?s).)*

ERHLR_FCODE_116 FAIL INDEX ERASURE NOT ALLOWED

((?s).)*FAULT CODE( )+115((?s).)*

ERHLR_FCODE_115 FAIL RESTRICTION NOT ALLOWED

((?s).)*FAULT CODE( )+114((?s).)*

ERHLR_FCODE_114 FAIL ORIGIN NOT DEFINED

((?s).)*FAULT CODE( )+113((?s).)*

ERHLR_FCODE_113 FAIL MISMATCH IN DATA BETWEEN ANALYSIS AND PRE-ANALYSIS

((?s).)*FAULT CODE( )+112((?s).)*

ERHLR_FCODE_112 FAIL CHARACTERISTIC NOT DEFINED

((?s).)*FAULT CODE( )+111((?s).)*

ERHLR_FCODE_111 FAIL ORIGIN ALREADY DEFINED

((?s).)*FAULT CODE( )+110((?s).)*

ERHLR_FCODE_110 FAIL ILLEGAL COMBINATION OF PARAMETERS

((?s).)*FAULT CODE( )+109((?s).)*

ERHLR_FCODE_109 FAIL ORIGIN DEFINED IN PRE-ANALYSIS OF NUMBER SERIES

((?s).)*FAULT CODE( )+108((?s).)*

ERHLR_FCODE_108 FAIL NUMBER SERIES NOT DEFINED WITHIN ORIGIN

((?s).)*FAULT CODE( )+107((?s).)*

ERHLR_FCODE_107 FAIL STORAGE SHORTAGE IN ANALYSIS FILE

((?s).)*FAULT CODE( )+106((?s).)*

ERHLR_FCODE_106 FAIL CHECKING OF ANALYSIS FILE IN PROGRESS

((?s).)*FAULT CODE( )+105((?s).)*

ERHLR_FCODE_105 FAIL ORIGIN IS USED BY ANOTHER USER FUNCTION

((?s).)*FAULT CODE( )+104((?s).)*

ERHLR_FCODE_104 FAIL CHARACTERISTIC VALUE NOT RECOGNIZED

Table 256: User defined ASDL exit types

Search pattern User_type Base_type Description

Page 379: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

User defined ASDL exit types

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 365

((?s).)*FAULT CODE( )+103((?s).)*

ERHLR_FCODE_103 FAIL USER FUNCTION NOT RECOGNIZED

((?s).)*FAULT CODE( )+102((?s).)*

ERHLR_FCODE_102 FAIL ODD NUMBER OF CHARACTERS IN SUBADDRESS

((?s).)*FAULT CODE( )+101((?s).)*

ERHLR_FCODE_101 FAIL Ericsson HLR FAULT CODE 101

((?s).)*FAULT CODE( )+100((?s).)*

ERHLR_FCODE_100 FAIL ZONE CODE NOT DEFINED

((?s).)*FAULT CODE( )+99((?s).)*

ERHLR_FCODE_99 FAIL ZONE CODE ALREADY DEFINED

((?s).)*FAULT CODE( )+98((?s).)*

ERHLR_FCODE_98 FAIL RSAI DOES NOT EXIST IN ZONE CODE SET

((?s).)*FAULT CODE( )+97((?s).)*

ERHLR_FCODE_97 FAIL ZONE CODE DELETION NOT ALLOWED

((?s).)*FAULT CODE( )+96((?s).)*

ERHLR_FCODE_96 FAIL ZONE CODE SET NOT DEFINED

((?s).)*FAULT CODE( )+95((?s).)*

ERHLR_FCODE_95 FAIL ZONE CODE INCLUDED MORE THAN ONCE

((?s).)*FAULT CODE( )+94((?s).)*

ERHLR_FCODE_94 FAIL ZONE CODE SET TIED TO SUBSCRIBERS

((?s).)*FAULT CODE( )+93((?s).)*

ERHLR_FCODE_93 FAIL MAXIMUM NUMBER OF RSAI EXCEEDED

((?s).)*FAULT CODE( )+92((?s).)*

ERHLR_FCODE_92 FAIL MAXIMUM NUMBER OF ZONE CODES EXCEEDED

((?s).)*FAULT CODE( )+91((?s).)*

ERHLR_FCODE_91 FAIL RSAI ALREADY EXISTS IN ZONE CODE SET

((?s).)*FAULT CODE( )+90((?s).)*

ERHLR_FCODE_90 FAIL INTERLOCK CODE NOT DEFINED

((?s).)*FAULT CODE( )+89((?s).)*

ERHLR_FCODE_89 FAIL PCUG NOT ALLOWED

Table 256: User defined ASDL exit types

Search pattern User_type Base_type Description

Page 380: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

366 Oracle Corporation

((?s).)*FAULT CODE( )+88((?s).)*

ERHLR_FCODE_88 FAIL PCUG NOT DEFINED AS INDEX

((?s).)*FAULT CODE( )+87((?s).)*

ERHLR_FCODE_87 FAIL BSG NOT DEFINED WITHIN GIVEN PCUG

((?s).)*FAULT CODE( )+86((?s).)*

ERHLR_FCODE_86 FAIL BSG NOT DEFINED WITHIN ANY CLOSED USER GROUP

((?s).)*FAULT CODE( )+85((?s).)*

ERHLR_FCODE_85 FAIL MSISDN NOT DEFINED AS CLOSED USER GROUP MEMBER

((?s).)*FAULT CODE( )+84((?s).)*

ERHLR_FCODE_84 FAIL INDEX NOT DEFINED

((?s).)*FAULT CODE( )+83((?s).)*

ERHLR_FCODE_83 FAIL BASIC SERVICE GROUP ERASURE NOT ALLOWED

((?s).)*FAULT CODE( )+82((?s).)*

ERHLR_FCODE_82 FAIL MAXIMUM NUMBER OF CLOSED USER GROUPS REACHED

((?s).)*FAULT CODE( )+81((?s).)*

ERHLR_FCODE_81 FAIL CLOSED USER GROUP NOT APPLICABLE TO ANY BSG

((?s).)*FAULT CODE( )+80((?s).)*

ERHLR_FCODE_80 FAIL UPDATING CLOSED USER GROUP DATA

((?s).)*FAULT CODE( )+79((?s).)*

ERHLR_FCODE_79 FAIL BASIC SERVICE GROUP INCLUDED MORE THAN ONCE

((?s).)*FAULT CODE( )+78((?s).)*

ERHLR_FCODE_78 FAIL INTERLOCK CODE ALREADY DEFINED

((?s).)*FAULT CODE( )+77((?s).)*

ERHLR_FCODE_77 FAIL INDEX ALREADY DEFINED

((?s).)*FAULT CODE( )+76((?s).)*

ERHLR_FCODE_76 FAIL CLOSED USER GROUP NOT APPLICABLE TO BSG

((?s).)*FAULT CODE( )+75((?s).)*

ERHLR_FCODE_75 DELAYED_FAIL

FUNCTIONALITY NOT SUPPORTED BY THIS EXCHANGE

Table 256: User defined ASDL exit types

Search pattern User_type Base_type Description

Page 381: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

User defined ASDL exit types

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 367

((?s).)*FAULT CODE( )+74((?s).)*

ERHLR_FCODE_74 FAIL BC RESERVED FOR SPECIFIC BS

((?s).)*FAULT CODE( )+73((?s).)*

ERHLR_FCODE_73 FAIL SUBSCRIBER DISCONNECTION IN PROGRESS

((?s).)*FAULT CODE( )+72((?s).)*

ERHLR_FCODE_72 FAIL FILE OUTPUT NOT INITIATED

((?s).)*FAULT CODE( )+71((?s).)*

ERHLR_FCODE_71 FAIL Ericsson HLR Fault Code 71

((?s).)*FAULT CODE( )+70((?s).)*

ERHLR_FCODE_70 FAIL STORAGE SHORTAGE IN CHANGEOVER DATA FILE

((?s).)*FAULT CODE( )+69((?s).)*

ERHLR_FCODE_69 FAIL CHARACTERISTIC NOT RECOGNIZED

((?s).)*FAULT CODE( )+68((?s).)*

ERHLR_FCODE_68 FAIL BC REPRESENTS A BS NOT SUPPORTED

((?s).)*FAULT CODE( )+67((?s).)*

ERHLR_FCODE_67 FAIL BC DOES NOT REPRESENT ANY BS

((?s).)*FAULT CODE( )+66((?s).)*

ERHLR_FCODE_66 FAIL CHANGEOVER STILL PENDING

((?s).)*FAULT CODE( )+65((?s).)*

ERHLR_FCODE_65 FAIL CHANGEOVER ALREADY EXECUTED

((?s).)*FAULT CODE( )+64((?s).)*

ERHLR_FCODE_64 FAIL CHANGEOVER NOT INITIATED

((?s).)*FAULT CODE( )+63((?s).)*

ERHLR_FCODE_63 FAIL CHANGEOVER ALREADY INITIATED

((?s).)*FAULT CODE( )+62((?s).)*

ERHLR_FCODE_62 FAIL SUPPLEMENTARY SERVICE NOT REGISTERED

((?s).)*FAULT CODE( )+61((?s).)*

ERHLR_FCODE_61 FAIL SS NOT APPLICABLE TO ANY SUBSCRIBED BASIC SERVICE

Table 256: User defined ASDL exit types

Search pattern User_type Base_type Description

Page 382: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

368 Oracle Corporation

((?s).)*FAULT CODE( )+60((?s).)*

ERHLR_FCODE_60 FAIL Ericsson HLR Fault Code 60

((?s).)*FAULT CODE( )+59((?s).)*

ERHLR_FCODE_59 FAIL INCOMPATIBILITY AMONGST PARAMETER UNITS

((?s).)*FAULT CODE( )+58((?s).)*

ERHLR_FCODE_58 FAIL Ericsson HLR Fault Code 58

((?s).)*FAULT CODE( )+57((?s).)*

ERHLR_FCODE_57 FAIL BC OUT OF RANGE

((?s).)*FAULT CODE( )+56((?s).)*

ERHLR_FCODE_56 FAIL BS NOT SUPPORTED

((?s).)*FAULT CODE( )+55((?s).)*

ERHLR_FCODE_55 FAIL BC NOT DEFINED

((?s).)*FAULT CODE( )+54((?s).)*

ERHLR_FCODE_54 FAIL STORAGE SHORTAGE IN AREA FILE

((?s).)*FAULT CODE( )+53((?s).)*

ERHLR_FCODE_53 FAIL MSISDN TYPE INCORRECT

((?s).)*FAULT CODE( )+52((?s).)*

ERHLR_FCODE_52 FAIL IMSI TYPE INCORRECT

((?s).)*FAULT CODE( )+51((?s).)*

ERHLR_FCODE_51 FAIL STORAGE SHORTAGE IN DATA FILE

((?s).)*FAULT CODE( )+50((?s).)*

ERHLR_FCODE_50 FAIL CHARACTERISTIC DOES NOT EXIST FOR THE AREA

((?s).)*FAULT CODE( )+49((?s).)*

ERHLR_FCODE_49 FAIL CHARACTERISTIC ALREADY GIVEN TO THE AREA

((?s).)*FAULT CODE( )+48((?s).)*

ERHLR_FCODE_48 FAIL MSISDN IS NOT AN ADDITIONAL MSISDN

((?s).)*FAULT CODE( )+47((?s).)*

ERHLR_FCODE_47 FAIL SUBSCRIPTION LIMIT OF NUMBERS REACHED

Table 256: User defined ASDL exit types

Search pattern User_type Base_type Description

Page 383: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

User defined ASDL exit types

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 369

((?s).)*FAULT CODE( )+46((?s).)*

ERHLR_FCODE_46 FAIL NO PENDING CHANGEOVER

((?s).)*FAULT CODE( )+45((?s).)*

ERHLR_FCODE_45 FAIL ADDITIONAL MSISDN TIED TO BC

((?s).)*FAULT CODE( )+44((?s).)*

ERHLR_FCODE_44 FAIL SS NOT APPLICABLE TO SPECIFIED BASIC SERVICE GROUP

((?s).)*FAULT CODE( )+43((?s).)*

ERHLR_FCODE_43 FAIL BASIC SERVICE GROUP NOT RECOGNIZED

((?s).)*FAULT CODE( )+42((?s).)*

ERHLR_FCODE_42 FAIL DATE NOT ACCEPTABLE

((?s).)*FAULT CODE( )+41((?s).)*

ERHLR_FCODE_41 FAIL NO BASIC SERVICE SUBSCRIBED WITHIN SPECIFIED BSG

((?s).)*FAULT CODE( )+40((?s).)*

ERHLR_FCODE_40 FAIL ALARM HAS NOT BEEN GIVEN

((?s).)*FAULT CODE( )+39((?s).)*

ERHLR_FCODE_39 FAIL DATA MISMATCH

((?s).)*FAULT CODE( )+38((?s).)*

ERHLR_FCODE_38 FAIL HLR EXCHANGE PROPERTY NOT ACCEPTED

((?s).)*FAULT CODE( )+37((?s).)*

ERHLR_FCODE_37 FAIL HLR EXCHANGE PROPERTY DESIGNATION NOT RECOGNIZED

((?s).)*FAULT CODE( )+36((?s).)*

ERHLR_FCODE_36 FAIL BC ALREADY DEFINED

((?s).)*FAULT CODE( )+35((?s).)*

ERHLR_FCODE_35 FAIL Ericsson HLR Fault Code 35

((?s).)*FAULT CODE( )+34((?s).)*

ERHLR_FCODE_34 FAIL ZEROING OR COPYING HAS BEEN INTERRUPTED BY A SYSTEM RESTART

Table 256: User defined ASDL exit types

Search pattern User_type Base_type Description

Page 384: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

370 Oracle Corporation

((?s).)*FAULT CODE( )+33((?s).)*

ERHLR_FCODE_33 FAIL OPERATION NOT ALLOWED DUE TO CURRENT LOCATION

((?s).)*FAULT CODE( )+32((?s).)*

ERHLR_FCODE_32 FAIL SUBSCRIBER DATA NOT APPLICABLE

((?s).)*FAULT CODE( )+31((?s).)*

ERHLR_FCODE_31 FAIL SUBSCRIBER DATA INCLUDED MORE THAN ONCE

((?s).)*FAULT CODE( )+30((?s).)*

ERHLR_FCODE_30 FAIL STORAGE SHORTAGE IN MODIFICATION MODULES

((?s).)*FAULT CODE( )+29((?s).)*

ERHLR_FCODE_29 FAIL SPECIFIED END RESULT OF ANALYSIS NOT ALLOWED

((?s).)*FAULT CODE( )+28((?s).)*

ERHLR_FCODE_28 FAIL ANALYSIS POINT CANNOT BE REACHED

((?s).)*FAULT CODE( )+27((?s).)*

ERHLR_FCODE_27 FAIL OPERATION NOT ALLOWED DUE TO INTERACTION

((?s).)*FAULT CODE( )+26((?s).)*

ERHLR_FCODE_26 FAIL FORWARDED-TO NUMBER MISSING

((?s).)*FAULT CODE( )+25((?s).)*

ERHLR_FCODE_25 FAIL PARAMETER NOT APPLICABLE

((?s).)*FAULT CODE( )+24((?s).)*

ERHLR_FCODE_24 FAIL STORAGE SHORTAGE IN FORWARDED-TO NUMBER ANALYSIS FILE

((?s).)*FAULT CODE( )+23((?s).)*

ERHLR_FCODE_23 FAIL PROTECTION TIME ELAPSED

((?s).)*FAULT CODE( )+22((?s).)*

ERHLR_FCODE_22 FAIL NON-OPERATING TABLE PROTECTED

((?s).)*FAULT CODE( )+21((?s).)*

ERHLR_FCODE_21 FAIL OFA ALREADY DEFINED

((?s).)*FAULT CODE( )+20((?s).)*

ERHLR_FCODE_20 FAIL OFA NOT DEFINED

Table 256: User defined ASDL exit types

Search pattern User_type Base_type Description

Page 385: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

User defined ASDL exit types

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 371

((?s).)*FAULT CODE( )+19((?s).)*

ERHLR_FCODE_19 FAIL FORWARDED-TO NUMBER RESTRICTED

((?s).)*FAULT CODE( )+18((?s).)*

ERHLR_FCODE_18 FAIL SUPPLEMENTARY SERVICE NOT PROVIDED

((?s).)*FAULT CODE( )+17((?s).)*

ERHLR_FCODE_17 FAIL SUPPLEMENTARY SERVICE NOT APPLICABLE

((?s).)*FAULT CODE( )+16((?s).)*

ERHLR_FCODE_16 FAIL SUPPLEMENTARY SERVICE NOT RECOGNIZED

((?s).)*FAULT CODE( )+15((?s).)*

ERHLR_FCODE_15 FAIL SUBSCRIBER DATA NOT RECOGNIZED

((?s).)*FAULT CODE( )+14((?s).)*

ERHLR_FCODE_14 FAIL MSISDN NOT DEFINED

((?s).)*FAULT CODE( )+13((?s).)*

ERHLR_FCODE_13 FAIL IMSI NOT DEFINED

((?s).)*FAULT CODE( )+12((?s).)*

ERHLR_FCODE_12 FAIL THERE IS AN MSISDN PREFIX OF THE MSISDN GIVEN.

((?s).)*FAULT CODE( )+11((?s).)*

ERHLR_FCODE_11 FAIL MSISDN IS PREFIX OF EXISTING MSISDN.

((?s).)*FAULT CODE( )+10((?s).)*

ERHLR_FCODE_10 FAIL THERE IS AN IMSI PREFIX OF THE IMSI GIVEN.

((?s).)*FAULT CODE( )+9((?s).)*

ERHLR_FCODE_9 FAIL IMSI IS PREFIX OF EXISTING IMSI.

((?s).)*FAULT CODE( )+8((?s).)*

ERHLR_FCODE_8 FAIL TIME OUT WHILE FETCHING AUTHENTICATION DATA.

((?s).)*FAULT CODE( )+7((?s).)*

ERHLR_FCODE_7 FAIL NO CONNECTION TO AUTHENTICATION CENTRE.

((?s).)*FAULT CODE( )+6((?s).)*

ERHLR_FCODE_6 FAIL SUBSCRIBER AUTHENTICATION DATA NOT FOUND.

Table 256: User defined ASDL exit types

Search pattern User_type Base_type Description

Page 386: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

372 Oracle Corporation

((?s).)*FAULT CODE( )+5((?s).)*

ERHLR_FCODE_5 FAIL STORAGE SHORTAGE IN THE MSISDN ANALYSIS FILE.

((?s).)*FAULT CODE( )+4((?s).)*

ERHLR_FCODE_4 FAIL STORAGE SHORTAGE IN THE IMSI ANALYSIS FILE.

((?s).)*FAULT CODE( )+3((?s).)*

ERHLR_FCODE_3 FAIL STORAGE SHORTAGE IN THE SUBSCRIBER DATA FILE.

((?s).)*FAULT CODE( )+2((?s).)*

ERHLR_FCODE_2 FAIL MSISDN ALREADY DEFINED.

((?s).)*FAULT CODE( )+1((?s).)*

ERHLR_FCODE_1 SOFT_FAIL IMSI ALREADY DEFINED.

((?s).)*FAULT CODE( )+486((?s).)*

ERHLR_FCODE_486 FAIL STORAGE SHORTAGE IN TERMINATING CAMEL PHASE 4 DATA FILE.

((?s).)*FAULT CODE( )+485((?s).)*

ERHLR_FCODE_485 FAIL STORAGE SHORTAGE IN ORIGINATING CAMEL PHASE 4 DATA FILE.

((?s).)*FAULT CODE( )+487((?s).)*

ERHLR_FCODE_487 FAIL STORAGE SHORTAGE IN VMSC TERMINATING CAMEL PHASE 4 DATA FILE.

((?s).)*FAULT CODE( )+446((?s).)*

ERHLR_FCODE_446 FAIL FNUM VALUE NOT ALLOWED.

((?s).)*FAULT CODE( )+489((?s).)*

ERHLR_FCODE_489 FAIL FNUM VALUE INCOMPATIBLE WITH OFA VALUE.

((?s).)*FAULT CODE( )+456((?s).)*

ERHLR_FCODE_456 FAIL SUBSCRIPTION BELONGS TO A MULTIPLE SUBSCRIPTION.

((?s).)*FAULT CODE( )+478((?s).)*

ERHLR_FCODE_478 FAIL LCS ADDRESS NOT DEFINED.

Table 256: User defined ASDL exit types

Search pattern User_type Base_type Description

Page 387: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

User defined ASDL exit types

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 373

((?s).)*FAULT CODE( )+302((?s).)*

ERHLR_FCODE_302 FAIL SUBSCRIBER GMLC ADDRESS ALREADY DEFINED.

((?s).)*FAULT CODE( )+291((?s).)*

ERHLR_FCODE_291 FAIL SUBSCRIBER LCS PRIVACY CLASS ALREADY DEFINED.

((?s).)*FAULT CODE( )+429((?s).)*

ERHLR_FCODE_429 FAIL SUBSCRIBER SERVICE TYPE NOT DEFINED.

((?s).)*FAULT CODE( )+324((?s).)*

ERHLR_FCODE_324 FAIL CALL RELATED LCS CLASS NOT DEFINED.

((?s).)*FAULT CODE( )+375((?s).)*

ERHLR_FCODE_375 FAIL MAXIMUM NUMBER OF SUBSCRIBER CALL RELATED EXTERNAL IDENTITIES REACHED.

((?s).)*FAULT CODE( )+376((?s).)*

ERHLR_FCODE_376 FAIL MAXIMUM NUMBER OF SUBSCRIBER CALL UNRELATED EXTERNAL IDENTITIES REACHED.

((?s).)*FAULT CODE( )+377((?s).)*

ERHLR_FCODE_377 FAIL CALL RELATED EXTERNAL ADDRESS NOT DEFINED.

((?s).)*FAULT CODE( )+378((?s).)*

ERHLR_FCODE_378 FAIL CALL UNRELATED EXTERNAL ADDRESS NOT DEFINED.

((?s).)*FAULT CODE( )+379((?s).)*

ERHLR_FCODE_379 FAIL CALL RELATED EXTERNAL ADDRESS ALREADY DEFINED.

((?s).)*FAULT CODE( )+380((?s).)*

ERHLR_FCODE_380 FAIL CALL UNRELATED EXTERNAL ADDRESS ALREADY DEFINED.

((?s).)*FAULT CODE( )+381((?s).)*

ERHLR_FCODE_381 FAIL CALL RELATED EXTERNAL ADDRESS GMLC RESTRICTION NOT DEFINED.

Table 256: User defined ASDL exit types

Search pattern User_type Base_type Description

Page 388: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

374 Oracle Corporation

((?s).)*FAULT CODE( )+382((?s).)*

ERHLR_FCODE_382 FAIL CALL UNRELATED EXTERNAL ADDRESS GMLC RESTRICTION NOT DEFINED.

((?s).)*FAULT CODE( )+383((?s).)*

ERHLR_FCODE_383 FAIL NAM VALUE NOT ALLOWED DUE TO FUNCTIONALITY NOT SUPPORTED.

((?s).)*FAULT CODE( )+385((?s).)*

ERHLR_FCODE_385 FAIL STORAGE SHORTAGE IN CALL UNRELATED EXTERNAL ADDRESS DATA FILE.

((?s).)*FAULT CODE( )+386((?s).)*

ERHLR_FCODE_386 FAIL STORAGE SHORTAGE IN CALL RELATED EXTERNAL ADDRESS DATA FILE.

((?s).)*FAULT CODE( )+387((?s).)*

ERHLR_FCODE_387 FAIL INTERNAL IDENTITY ALREADY GIVEN IN COMMAND.

((?s).)*FAULT CODE( )+388((?s).)*

ERHLR_FCODE_388 FAIL SUBSCRIBER LCS MO CLASS ALREADY GIVEN IN COMMAND.

((?s).)*FAULT CODE( )+390((?s).)*

ERHLR_FCODE_390 FAIL STORAGE SHORTAGE IN EXTERNAL ADDRESS DATA FILE.

((?s).)*FAULT CODE( )+419((?s).)*

ERHLR_FCODE_419 FAIL STORAGE SHORTAGE IN EXTERNAL ADDRESS ANALYSIS FILE.

((?s).)*FAULT CODE( )+424((?s).)*

ERHLR_FCODE_424 FAIL SUBSCRIBER SERVICE TYPE ALREADY DEFINED.

((?s).)*FAULT CODE( )+426((?s).)*

ERHLR_FCODE_426 FAIL TOO MANY SERVICE TYPES SPECIFIED FOR THE SUBSCRIBER.

((?s).)*FAULT CODE( )+427((?s).)*

ERHLR_FCODE_427 FAIL SUBSCRIBER SERVICE TYPE ALREADY GIVEN IN COMMAND.

Table 256: User defined ASDL exit types

Search pattern User_type Base_type Description

Page 389: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

User defined ASDL exit types

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 375

((?s).)*FAULT CODE( )+428((?s).)*

ERHLR_FCODE_428 FAIL NO SUBSCRIBER SERVICE TYPES DEFINED.

((?s).)*FAULT CODE( )+430((?s).)*

ERHLR_FCODE_430 FAIL SERVICE TYPE GMLC RESTRICTION NOT DEFINED.

((?s).)*FAULT CODE( )+436((?s).)*

ERHLR_FCODE_436 FAIL NO SUBSCRIBER INTERNAL IDENTITIES DEFINED.

((?s).)*FAULT CODE( )+437((?s).)*

ERHLR_FCODE_437 FAIL PDP CONTEXT IDENTIFIER IN USE.

((?s).)*FAULT CODE( )+457((?s).)*

ERHLR_FCODE_457 FAIL IMSI CORRESPONDS TO MASTER SUBSCRIPTION.

((?s).)*FAULT CODE( )+458((?s).)*

ERHLR_FCODE_458 FAIL IMSI ALREADY GIVEN IN COMMAND.

((?s).)*FAULT CODE( )+459((?s).)*

ERHLR_FCODE_459 FAIL UPDATING MULTIPLE SUBSCRIPTION DATA IN PROGRESS.

((?s).)*FAULT CODE( )+460((?s).)*

ERHLR_FCODE_460 FAIL TOO MANY IMSIS SPECIFIED.

((?s).)*FAULT CODE( )+461((?s).)*

ERHLR_FCODE_461 FAIL STORAGE SHORTAGE IN MULTIPLE SUBSCRIPTION DATA FILE.

((?s).)*FAULT CODE( )+462((?s).)*

ERHLR_FCODE_462 FAIL SUBSCRIPTION IS NOT A MASTER SUBSCRIPTION.

((?s).)*FAULT CODE( )+463((?s).)*

ERHLR_FCODE_463 FAIL SUBSCRIPTION DOES NOT BELONG TO THE MULTIPLE SUBSCRIPTION.

((?s).)*FAULT CODE( )+464((?s).)*

ERHLR_FCODE_464 FAIL MAXIMUM NUMBER OF SUBSCRIPTIONS IN MULTIPLE SUBSCRIPTION EXCEEDED.

Table 256: User defined ASDL exit types

Search pattern User_type Base_type Description

Page 390: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

376 Oracle Corporation

UserExitType.xml<?xml version="1.0" encoding="UTF-8"?><serviceModel xmlns:ude="http://www.mslv.com/studio/activation/model/userDefinedExitType" xmlns:sm="http://www.metasolv.com/ServiceActivation/2003/ServiceModel" xmlns="http://www.metasolv.com/ServiceActivation/2003/ServiceModel" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FORMAT ERROR((?s).)*</searchPattern> <userType>ERHLR_FORMAT_ERROR</userType> <baseType>FAIL</baseType> <description>FORMAT ERROR</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*NOT EXECUTED((?s).)*</searchPattern> <userType>ERHLR_NOT_EXECUTED</userType> <baseType>RETRY</baseType> <description>COMMAND NOT EXECUTED</description> </userDefinedExitType>

((?s).)*FAULT CODE( )+465((?s).)*

ERHLR_FCODE_465 FAIL MINIMUM NUMBER OF SUBSCRIPTIONS IN MULTIPLE SUBSCRIPTION EXCEEDED.

((?s).)*FAULT CODE( )+466((?s).)*

ERHLR_FCODE_466 FAIL CHANGE OF ACTIVE SUBSCRIPTION NOT ALLOWED.

((?s).)*FAULT CODE( )+479((?s).)*

ERHLR_FCODE_479 FAIL SUBSCRIBER HAS A HGMLC ADDRESS ALREADY DEFINED.

((?s).)*FAULT CODE( )+480((?s).)*

ERHLR_FCODE_480 FAIL SUBSCRIBER HAS A PPR ADDRESS ALREADY DEFINED.

Table 256: User defined ASDL exit types

Search pattern User_type Base_type Description

Page 391: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

UserExitType.xml

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 377

<userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*UNREASONABLE VALUE((?s).)*</searchPattern> <userType>ERHLR_UNREASON_VALUE</userType> <baseType>FAIL</baseType> <description>UNREASONABLE VALUE</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*PARTLY EXECUTED((?s).)*</searchPattern> <userType>ERHLR_PART_EXECUTED</userType> <baseType>SOFT_FAIL</baseType> <description>PARTLY EXECUTED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*ORDERED((?s).)*</searchPattern> <userType>ERHLR_ORDERED</userType> <baseType>SUCCEED</baseType> <description>COMMAND ORDERED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*EXECUTED((?s).)*</searchPattern> <userType>ERHLR_EXECUTED</userType> <baseType>SUCCEED</baseType> <description>The command has been executed.</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FUNCTION BUSY((?s).)*</searchPattern> <userType>ERHLR_FUNCTION_BUSY</userType>

Page 392: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

378 Oracle Corporation

<baseType>RETRY</baseType> <description>FUNCTION BUSY</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*NOT ACCEPTED((?s).)*</searchPattern> <userType>ERHLR_NOT_ACCEPTED</userType> <baseType>FAIL</baseType> <description>COMMAND NOT ACCEPTED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*ANSWER PRINTOUT((?s).)*</searchPattern> <userType>ERHLR_ANSWER_PRNTOUT</userType> <baseType>SUCCEED</baseType> <description>HLR ANSWER PRINTOUT</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*Missing mandatory parameter((?s).)*</searchPattern> <userType>ERHLR_MASSCHG_EXTION</userType> <baseType>SOFT_FAIL</baseType> <description>Some of the MML commands failed when provisioning.</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*IOException((?s).)*</searchPattern> <userType>ERHLR_IOEXCEPTION</userType> <baseType>RETRY_DIS</baseType> <description>IO Exception.</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad>

Page 393: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

UserExitType.xml

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 379

<technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*TelnetException((?s).)*</searchPattern> <userType>ERHLR_TELNET_EXPTION</userType> <baseType>RETRY_DIS</baseType> <description>Telnet Exception.</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*ProvCartridgeException((?s).)*</searchPattern> <userType>ERHLR_PROVCARTEXCEP</userType> <baseType>FAIL</baseType> <description>Provisioning Cartridge Exception.</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*NO_UDET_MATCH((?s).)*</searchPattern> <userType>NO_UDET_MATCH</userType> <baseType>FAIL</baseType> <description>No User Defined Exit Type Match.</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*Generic Exception((?s).)*</searchPattern> <userType>ERHLR_GEN_EXCEPTION</userType> <baseType>FAIL</baseType> <description>Generic Exception.</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*END((?s).)*</searchPattern> <userType>ERHLR_END</userType> <baseType>SUCCEED</baseType> <description>Remote Host reply (END).</description>

Page 394: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

380 Oracle Corporation

</userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>&lt;</searchPattern> <userType>ERHLR_LOOPBACK_OK</userType> <baseType>SUCCEED</baseType> <description>Loopback testing only.</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+482((?s).)*</searchPattern> <userType>ERHLR_FCODE_482</userType> <baseType>FAIL</baseType> <description>NO SUBSCRIBER PPR ADDRESS DEFINED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+481((?s).)*</searchPattern> <userType>ERHLR_FCODE_481</userType> <baseType>FAIL</baseType> <description>NO SUBSCRIBER HGMLC ADDRESS DEFINED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+438((?s).)*</searchPattern> <userType>ERHLR_FCODE_438</userType> <baseType>FAIL</baseType> <description>PDP ADDRESS INCOMPATIBLE WITH PDP TYPE</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+415((?s).)*</searchPattern>

Page 395: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

UserExitType.xml

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 381

<userType>ERHLR_FCODE_415</userType> <baseType>FAIL</baseType> <description>SUBSCRIBER GMLC ADDRESS ALREADY GIVEN IN COMMAND</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+413((?s).)*</searchPattern> <userType>ERHLR_FCODE_413</userType> <baseType>FAIL</baseType> <description>NO VALID ORIGINATING CAMEL SUBSCRIPTION DEFINED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+411((?s).)*</searchPattern> <userType>ERHLR_FCODE_411</userType> <baseType>FAIL</baseType> <description>NO MMTDP DEFINED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+400((?s).)*</searchPattern> <userType>ERHLR_FCODE_400</userType> <baseType>FAIL</baseType> <description>TRIGGER DETECTION POINT INCLUDED MORE THAN ONCE</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+399((?s).)*</searchPattern> <userType>ERHLR_FCODE_399</userType> <baseType>FAIL</baseType> <description>MAXIMUM NUMBER OF VTTDP REACHED</description> </userDefinedExitType> <userDefinedExitType>

Page 396: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

382 Oracle Corporation

<neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+398((?s).)*</searchPattern> <userType>ERHLR_FCODE_398</userType> <baseType>FAIL</baseType> <description>TOO MANY VTTDP SPECIFIED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+397((?s).)*</searchPattern> <userType>ERHLR_FCODE_397</userType> <baseType>FAIL</baseType> <description>VTTDP NOT DEFINED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+396((?s).)*</searchPattern> <userType>ERHLR_FCODE_396</userType> <baseType>FAIL</baseType> <description>STORAGE SHORTAGE IN VMSC TERMINATING CAMEL PHASE 3 DATA FILE</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+395((?s).)*</searchPattern> <userType>ERHLR_FCODE_395</userType> <baseType>FAIL</baseType> <description>STORAGE SHORTAGE IN TERMINATING CAMEL PHASE 3 DATA FILE</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+394((?s).)*</searchPattern>

Page 397: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

UserExitType.xml

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 383

<userType>ERHLR_FCODE_394</userType> <baseType>FAIL</baseType> <description>STORAGE SHORTAGE IN ORIGINATING CAMEL PHASE 3 DATA FILE</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+393((?s).)*</searchPattern> <userType>ERHLR_FCODE_393</userType> <baseType>FAIL</baseType> <description>VTTDP VALUE NOT ALLOWED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+392((?s).)*</searchPattern> <userType>ERHLR_FCODE_392</userType> <baseType>FAIL</baseType> <description>VTTDP ALREADY DEFINED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+391((?s).)*</searchPattern> <userType>ERHLR_FCODE_391</userType> <baseType>FAIL</baseType> <description>CCH VALUE NOT ALLOWED FOR THIS TDP VALUE</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+389((?s).)*</searchPattern> <userType>ERHLR_FCODE_389</userType> <baseType>FAIL</baseType> <description>STORAGE SHORTAGE IN IPV6 ADDRESS DATA FILE</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor>

Page 398: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

384 Oracle Corporation

<softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+367((?s).)*</searchPattern> <userType>ERHLR_FCODE_267</userType> <baseType>FAIL</baseType> <description>DEH NOT APPLICABLE FOR THIS TYPE OF TDP</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+345((?s).)*</searchPattern> <userType>ERHLR_FCODE_345</userType> <baseType>FAIL</baseType> <description>DSTDP NOT DEFINED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+344((?s).)*</searchPattern> <userType>ERHLR_FCODE_344</userType> <baseType>FAIL</baseType> <description>STORAGE SHORTAGE IN DIALLED SERVICES CAMEL DATA FILE</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+342((?s).)*</searchPattern> <userType>ERHLR_FCODE_342</userType> <baseType>FAIL</baseType> <description>DSTDP ALREADY DEFINED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+341((?s).)*</searchPattern> <userType>ERHLR_FCODE_341</userType> <baseType>FAIL</baseType>

Page 399: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

UserExitType.xml

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 385

<description>TOO MANY MMTDP SPECIFIED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+340((?s).)*</searchPattern> <userType>ERHLR_FCODE_340</userType> <baseType>FAIL</baseType> <description>DIALNUM ALREADY DEFINED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+339((?s).)*</searchPattern> <userType>ERHLR_FCODE_339</userType> <baseType>FAIL</baseType> <description>MMTDP NOT DEFINED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+338((?s).)*</searchPattern> <userType>ERHLR_FCODE_338</userType> <baseType>FAIL</baseType> <description>GSA ALREADY DEFINED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+337((?s).)*</searchPattern> <userType>ERHLR_FCODE_337</userType> <baseType>FAIL</baseType> <description>SERVICE KEY NOT SPECIFIED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor>

Page 400: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

386 Oracle Corporation

<searchPattern>((?s).)*FAULT CODE( )+336((?s).)*</searchPattern> <userType>ERHLR_FCODE_336</userType> <baseType>FAIL</baseType> <description>GSA NOT SPECIFIED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+335((?s).)*</searchPattern> <userType>ERHLR_FCODE_335</userType> <baseType>FAIL</baseType> <description>STORAGE SHORTAGE IN MOBILITY MANAGEMENT CAMEL DATA FILE</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+334((?s).)*</searchPattern> <userType>ERHLR_FCODE_334</userType> <baseType>FAIL</baseType> <description>MAXIMUM NUMBER OF MMTDP REACHED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+333((?s).)*</searchPattern> <userType>ERHLR_FCODE_333</userType> <baseType>FAIL</baseType> <description>MMTDP ALREADY DEFINED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+332((?s).)*</searchPattern> <userType>ERHLR_FCODE_332</userType> <baseType>FAIL</baseType> <description>MMTDP VALUE NOT ALLOWED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor>

Page 401: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

UserExitType.xml

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 387

<softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+331((?s).)*</searchPattern> <userType>ERHLR_FCODE_331</userType> <baseType>FAIL</baseType> <description>SERVICE KEY ALREADY DEFINED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+330((?s).)*</searchPattern> <userType>ERHLR_FCODE_330</userType> <baseType>FAIL</baseType> <description>TSMSTDP NOT DEFINED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+329((?s).)*</searchPattern> <userType>ERHLR_FCODE_329</userType> <baseType>FAIL</baseType> <description>TOO MANY TSMSTDP SPECIFIED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+328((?s).)*</searchPattern> <userType>ERHLR_FCODE_328</userType> <baseType>FAIL</baseType> <description>STORAGE SHORTAGE IN TERMINATING SMS CAMEL DATA FILE</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+327((?s).)*</searchPattern> <userType>ERHLR_FCODE_327</userType> <baseType>FAIL</baseType>

Page 402: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

388 Oracle Corporation

<description>MAXIMUM NUMBER OF TSMSTDP REACHED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+326((?s).)*</searchPattern> <userType>ERHLR_FCODE_326</userType> <baseType>FAIL</baseType> <description>TSMSTDP ALREADY DEFINED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+325((?s).)*</searchPattern> <userType>ERHLR_FCODE_325</userType> <baseType>FAIL</baseType> <description>TSMSTDP VALUE NOT ALLOWED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+318((?s).)*</searchPattern> <userType>ERHLR_FCODE_318</userType> <baseType>FAIL</baseType> <description>APN IDENTIFIER OUT OF RANGE</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+317((?s).)*</searchPattern> <userType>ERHLR_FCODE_317</userType> <baseType>FAIL</baseType> <description>STORAGE SHORTAGE IN APN DATA FILE</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor>

Page 403: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

UserExitType.xml

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 389

<searchPattern>((?s).)*FAULT CODE( )+316((?s).)*</searchPattern> <userType>ERHLR_FCODE_316</userType> <baseType>FAIL</baseType> <description>STATIC ADDRESSING NOT ALLOWED FOR PDP CONTEXT TYPE</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+315((?s).)*</searchPattern> <userType>ERHLR_FCODE_315</userType> <baseType>FAIL</baseType> <description>PDP TYPE INCOMPATIBLE WITH EXTENDED QOS</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+314((?s).)*</searchPattern> <userType>ERHLR_FCODE_314</userType> <baseType>FAIL</baseType> <description>EXTENDED QOS NOT DEFINED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+309((?s).)*</searchPattern> <userType>ERHLR_FCODE_309</userType> <baseType>FAIL</baseType> <description>TOO MANY OSMSTDP SPECIFIED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+308((?s).)*</searchPattern> <userType>ERHLR_FCODE_308</userType> <baseType>FAIL</baseType> <description>OSMSTDP NOT DEFINED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor>

Page 404: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

390 Oracle Corporation

<softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+307((?s).)*</searchPattern> <userType>ERHLR_FCODE_307</userType> <baseType>FAIL</baseType> <description>OSMSTDP VALUE NOT ALLOWED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+306((?s).)*</searchPattern> <userType>ERHLR_FCODE_306</userType> <baseType>FAIL</baseType> <description>MAXIMUM NUMBER OF OSMSTDP REACHED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+305((?s).)*</searchPattern> <userType>ERHLR_FCODE_305</userType> <baseType>FAIL</baseType> <description>OSMSTDP ALREADY DEFINED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+304((?s).)*</searchPattern> <userType>ERHLR_FCODE_304</userType> <baseType>FAIL</baseType> <description>STORAGE SHORTAGE IN ORIGINATING SMS CAMEL DATA FILE</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+303((?s).)*</searchPattern> <userType>ERHLR_FCODE_303</userType> <baseType>FAIL</baseType>

Page 405: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

UserExitType.xml

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 391

<description>SUBSCRIBER GMLC ADDRESS NOT DEFINED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+287((?s).)*</searchPattern> <userType>ERHLR_FCODE_287</userType> <baseType>FAIL</baseType> <description>NO SUBSCRIBER GMLC ADDRESSES DEFINED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+281((?s).)*</searchPattern> <userType>ERHLR_FCODE_281</userType> <baseType>FAIL</baseType> <description>UPDATING OF SUBSCRIBER LCS DATA IN PROGRESS</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+278((?s).)*</searchPattern> <userType>ERHLR_FCODE_278</userType> <baseType>FAIL</baseType> <description>TOO MANY GPRSTDP SPECIFIED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+277((?s).)*</searchPattern> <userType>ERHLR_FCODE_277</userType> <baseType>FAIL</baseType> <description>GPRSTDP NOT DEFINED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor>

Page 406: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

392 Oracle Corporation

</neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+276((?s).)*</searchPattern> <userType>ERHLR_FCODE_276</userType> <baseType>FAIL</baseType> <description>GPRSTDP VALUE NOT ALLOWED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+275((?s).)*</searchPattern> <userType>ERHLR_FCODE_275</userType> <baseType>FAIL</baseType> <description>CCH VALUE NOT ALLOWED FOR THIS TYPE OF TDP</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+274((?s).)*</searchPattern> <userType>ERHLR_FCODE_274</userType> <baseType>FAIL</baseType> <description>I NOT APPLICABLE FOR THIS TYPE OF TDP</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+273((?s).)*</searchPattern> <userType>ERHLR_FCODE_273</userType> <baseType>FAIL</baseType> <description>MAXIMUM NUMBER OF GPRSTDP REACHED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+272((?s).)*</searchPattern> <userType>ERHLR_FCODE_272</userType> <baseType>FAIL</baseType> <description>GPRSTDP ALREADY DEFINED</description> </userDefinedExitType> <userDefinedExitType>

Page 407: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

UserExitType.xml

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 393

<neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+271((?s).)*</searchPattern> <userType>ERHLR_FCODE_271</userType> <baseType>FAIL</baseType> <description>STORAGE SHORTAGE IN GPRS CAMEL PHASE 3 DATA FILE</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+270((?s).)*</searchPattern> <userType>ERHLR_FCODE_270</userType> <baseType>FAIL</baseType> <description>STORAGE SHORTAGE IN QUINTET DATA FILE</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+269((?s).)*</searchPattern> <userType>ERHLR_FCODE_269</userType> <baseType>FAIL</baseType> <description>STORAGE SHORTAGE IN TRIPLET DATA FILE</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+268((?s).)*</searchPattern> <userType>ERHLR_FCODE_268</userType> <baseType>FAIL</baseType> <description>STORAGE SHORTAGE IN TERMINATING CAMEL PHASE 1 DATA FILE</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+267((?s).)*</searchPattern>

Page 408: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

394 Oracle Corporation

<userType>ERHLR_FCODE_267</userType> <baseType>FAIL</baseType> <description>STORAGE SHORTAGE IN ORIGINATING CAMEL PHASE 1 DATA FILE</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+266((?s).)*</searchPattern> <userType>ERHLR_FCODE_266</userType> <baseType>FAIL</baseType> <description>Ericsson HLR FAULT CODE 266</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+265((?s).)*</searchPattern> <userType>ERHLR_FCODE_265</userType> <baseType>FAIL</baseType> <description>STORAGE SHORTAGE IN BSG FOR AUXILIARY SPEECH SERVICES DATA FILE</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+264((?s).)*</searchPattern> <userType>ERHLR_FCODE_264</userType> <baseType>FAIL</baseType> <description>SGSN NUMBER NOT FOUND</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+263((?s).)*</searchPattern> <userType>ERHLR_FCODE_263</userType> <baseType>FAIL</baseType> <description>LAST OCTDP REMOVAL NOT ALLOWED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor>

Page 409: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

UserExitType.xml

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 395

<softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+262((?s).)*</searchPattern> <userType>ERHLR_FCODE_262</userType> <baseType>FAIL</baseType> <description>Ericsson HLR FAULT CODE 262</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+261((?s).)*</searchPattern> <userType>ERHLR_FCODE_261</userType> <baseType>FAIL</baseType> <description>STORAGE SHORTAGE IN TERMINATING CAMEL PHASE 2 DATA FILE</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+260((?s).)*</searchPattern> <userType>ERHLR_FCODE_260</userType> <baseType>FAIL</baseType> <description>STORAGE SHORTAGE IN ORIGINATING CAMEL PHASE 2 DATA FILE</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+259((?s).)*</searchPattern> <userType>ERHLR_FCODE_259</userType> <baseType>FAIL</baseType> <description>OFA VALUE NOT ALLOWED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+258((?s).)*</searchPattern> <userType>ERHLR_FCODE_258</userType>

Page 410: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

396 Oracle Corporation

<baseType>FAIL</baseType> <description>STORAGE SHORTAGE IN ZONE CODE DATA FILE</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+257((?s).)*</searchPattern> <userType>ERHLR_FCODE_257</userType> <baseType>FAIL</baseType> <description>FILE INPUT IN PROGRESS</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+256((?s).)*</searchPattern> <userType>ERHLR_FCODE_256</userType> <baseType>FAIL</baseType> <description>Ericsson HLR FAULT CODE 256</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+255((?s).)*</searchPattern> <userType>ERHLR_FCODE_255</userType> <baseType>FAIL</baseType> <description>LOG DATA FILE DOES NOT EXIST</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+254((?s).)*</searchPattern> <userType>ERHLR_FCODE_254</userType> <baseType>FAIL</baseType> <description>FILE INPUT PROCESS NOT INITIATED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor>

Page 411: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

UserExitType.xml

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 397

</neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+253((?s).)*</searchPattern> <userType>ERHLR_FCODE_253</userType> <baseType>FAIL</baseType> <description>Ericsson HLR FAULT CODE 253</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+252((?s).)*</searchPattern> <userType>ERHLR_FCODE_252</userType> <baseType>FAIL</baseType> <description>Ericsson HLR FAULT CODE 252</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+251((?s).)*</searchPattern> <userType>ERHLR_FCODE_251</userType> <baseType>FAIL</baseType> <description>Ericsson HLR FAULT CODE 251</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+250((?s).)*</searchPattern> <userType>ERHLR_FCODE_250</userType> <baseType>FAIL</baseType> <description>Ericsson HLR FAULT CODE 250</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+249((?s).)*</searchPattern> <userType>ERHLR_FCODE_249</userType> <baseType>FAIL</baseType> <description>Ericsson HLR FAULT CODE 249</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor>

Page 412: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

398 Oracle Corporation

<softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+248((?s).)*</searchPattern> <userType>ERHLR_FCODE_248</userType> <baseType>FAIL</baseType> <description>Ericsson HLR FAULT CODE 248</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+247((?s).)*</searchPattern> <userType>ERHLR_FCODE_247</userType> <baseType>FAIL</baseType> <description>Ericsson HLR FAULT CODE 247</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+246((?s).)*</searchPattern> <userType>ERHLR_FCODE_246</userType> <baseType>FAIL</baseType> <description>STORAGE SHORTAGE IN SUBADDRESS DATA FILE FOR AUXILIARY SPEECH</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+245((?s).)*</searchPattern> <userType>ERHLR_FCODE_245</userType> <baseType>FAIL</baseType> <description>STORAGE SHORTAGE IN SUBADDRESS DATA FILE FOR FACSIMILE</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+244((?s).)*</searchPattern> <userType>ERHLR_FCODE_244</userType>

Page 413: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

UserExitType.xml

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 399

<baseType>FAIL</baseType> <description>STORAGE SHORTAGE IN SUBADDRESS DATA FILE FOR DATA CIRCUIT SYNCHRONOUS</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+243((?s).)*</searchPattern> <userType>ERHLR_FCODE_243</userType> <baseType>FAIL</baseType> <description>STORAGE SHORTAGE IN SUBADDRESS DATA FILE FOR DATA CIRCUIT ASYNCHRONOUS</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+242((?s).)*</searchPattern> <userType>ERHLR_FCODE_242</userType> <baseType>FAIL</baseType> <description>STORAGE SHORTAGE IN SUBADDRESS DATA FILE FOR SPEECH</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+241((?s).)*</searchPattern> <userType>ERHLR_FCODE_241</userType> <baseType>FAIL</baseType> <description>NO GMLC ADDRESSES DEFINED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+240((?s).)*</searchPattern> <userType>ERHLR_FCODE_240</userType> <baseType>FAIL</baseType> <description>GMLC ADDRESS NOT DEFINED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor>

Page 414: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

400 Oracle Corporation

<softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+239((?s).)*</searchPattern> <userType>ERHLR_FCODE_239</userType> <baseType>FAIL</baseType> <description>MAXIMUM NUMBER OF GMLC ADDRESSES DEFINED REACHED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+238((?s).)*</searchPattern> <userType>ERHLR_FCODE_238</userType> <baseType>FAIL</baseType> <description>GMLC ADDRESS ALREADY DEFINED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+237((?s).)*</searchPattern> <userType>ERHLR_FCODE_237</userType> <baseType>FAIL</baseType> <description>Ericsson HLR FAULT CODE 237</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+236((?s).)*</searchPattern> <userType>ERHLR_FCODE_236</userType> <baseType>FAIL</baseType> <description>UPDATING SUBSCRIBER TRACE DATA IN PROGRESS</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+235((?s).)*</searchPattern> <userType>ERHLR_FCODE_235</userType>

Page 415: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

UserExitType.xml

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 401

<baseType>FAIL</baseType> <description>Ericsson HLR FAULT CODE 235</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+234((?s).)*</searchPattern> <userType>ERHLR_FCODE_234</userType> <baseType>FAIL</baseType> <description>Ericsson HLR FAULT CODE 234</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+233((?s).)*</searchPattern> <userType>ERHLR_FCODE_233</userType> <baseType>FAIL</baseType> <description>Ericsson HLR FAULT CODE 233</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+232((?s).)*</searchPattern> <userType>ERHLR_FCODE_232</userType> <baseType>FAIL</baseType> <description>TRACE DATA NOT INITIATED FOR THIS IMSI</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+231((?s).)*</searchPattern> <userType>ERHLR_FCODE_231</userType> <baseType>FAIL</baseType> <description>Ericsson HLR FAULT CODE 231</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor>

Page 416: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

402 Oracle Corporation

</neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+230((?s).)*</searchPattern> <userType>ERHLR_FCODE_230</userType> <baseType>FAIL</baseType> <description>Ericsson HLR FAULT CODE 230</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+229((?s).)*</searchPattern> <userType>ERHLR_FCODE_229</userType> <baseType>FAIL</baseType> <description>Ericsson HLR FAULT CODE 229</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+228((?s).)*</searchPattern> <userType>ERHLR_FCODE_228</userType> <baseType>FAIL</baseType> <description>Ericsson HLR FAULT CODE 228</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+227((?s).)*</searchPattern> <userType>ERHLR_FCODE_227</userType> <baseType>FAIL</baseType> <description>Ericsson HLR FAULT CODE 227</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+226((?s).)*</searchPattern> <userType>ERHLR_FCODE_226</userType> <baseType>FAIL</baseType> <description>Ericsson HLR FAULT CODE 226</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor>

Page 417: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

UserExitType.xml

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 403

<softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+225((?s).)*</searchPattern> <userType>ERHLR_FCODE_225</userType> <baseType>FAIL</baseType> <description>Ericsson HLR FAULT CODE 225</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+224((?s).)*</searchPattern> <userType>ERHLR_FCODE_224</userType> <baseType>FAIL</baseType> <description>Ericsson HLR FAULT CODE 224</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+223((?s).)*</searchPattern> <userType>ERHLR_FCODE_223</userType> <baseType>FAIL</baseType> <description>Ericsson HLR FAULT CODE 223</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+222((?s).)*</searchPattern> <userType>ERHLR_FCODE_222</userType> <baseType>FAIL</baseType> <description>PDP CONTEXT NOT DEFINED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+221((?s).)*</searchPattern> <userType>ERHLR_FCODE_221</userType> <baseType>FAIL</baseType>

Page 418: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

404 Oracle Corporation

<description>SUBSCRIBER DATA INCOMPATIBLE WITH STORED SUBSCRIBER DATA</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+220((?s).)*</searchPattern> <userType>ERHLR_FCODE_220</userType> <baseType>FAIL</baseType> <description>SUBSCRIBER NETWORK ACCESS MODE HAS ALREADY THAT VALUE</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+219((?s).)*</searchPattern> <userType>ERHLR_FCODE_219</userType> <baseType>FAIL</baseType> <description>SUBSCRIBER PDP CONTEXT IDENTIFIER REPEATED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+218((?s).)*</searchPattern> <userType>ERHLR_FCODE_218</userType> <baseType>FAIL</baseType> <description>UPDATING OF SUBSCRIBER PDP CONTEXT IN PROGRESS</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+217((?s).)*</searchPattern> <userType>ERHLR_FCODE_217</userType> <baseType>FAIL</baseType> <description>SUBSCRIBER PDP CONTEXT WITH NON SUBSCRIBED APN ALREADY DEFINED</description> </userDefinedExitType> <userDefinedExitType>

Page 419: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

UserExitType.xml

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 405

<neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+216((?s).)*</searchPattern> <userType>ERHLR_FCODE_216</userType> <baseType>FAIL</baseType> <description>SUBSCRIBER PDP CONTEXT ALREADY DEFINED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+215((?s).)*</searchPattern> <userType>ERHLR_FCODE_215</userType> <baseType>FAIL</baseType> <description>MAXIMUM NUMBER OF SUBSCRIBER PDP CONTEXT REACHED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+214((?s).)*</searchPattern> <userType>ERHLR_FCODE_214</userType> <baseType>SOFT_FAIL</baseType> <description>APN ALREADY DEFINED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+213((?s).)*</searchPattern> <userType>ERHLR_FCODE_213</userType> <baseType>FAIL</baseType> <description>Ericsson HLR FAULT CODE 213</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+212((?s).)*</searchPattern> <userType>ERHLR_FCODE_212</userType>

Page 420: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

406 Oracle Corporation

<baseType>FAIL</baseType> <description>APN IN USE</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+211((?s).)*</searchPattern> <userType>ERHLR_FCODE_211</userType> <baseType>FAIL</baseType> <description>APN NOT DEFINED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+210((?s).)*</searchPattern> <userType>ERHLR_FCODE_210</userType> <baseType>DELAYED_FAIL</baseType> <description>APN NOT VALID</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+209((?s).)*</searchPattern> <userType>ERHLR_FCODE_209</userType> <baseType>DELAYED_FAIL</baseType> <description>APN IDENTIFIER IN USE</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+208((?s).)*</searchPattern> <userType>ERHLR_FCODE_208</userType> <baseType>FAIL</baseType> <description>BS3G FOR BS3F NOT DEFINED IN THE PROFILE</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor>

Page 421: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

UserExitType.xml

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 407

</neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+207((?s).)*</searchPattern> <userType>ERHLR_FCODE_207</userType> <baseType>FAIL</baseType> <description>BS2G FOR BS2F NOT DEFINED IN THE PROFILE</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+206((?s).)*</searchPattern> <userType>ERHLR_FCODE_206</userType> <baseType>FAIL</baseType> <description>Ericsson HLR FAULT CODE 206</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+205((?s).)*</searchPattern> <userType>ERHLR_FCODE_205</userType> <baseType>FAIL</baseType> <description>Ericsson HLR FAULT CODE 205</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+204((?s).)*</searchPattern> <userType>ERHLR_FCODE_204</userType> <baseType>FAIL</baseType> <description>NO TERMINATING CAMEL SUBSCRIPTION DEFINED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+203((?s).)*</searchPattern> <userType>ERHLR_FCODE_203</userType> <baseType>FAIL</baseType> <description>NO ORIGINATING CAMEL SUBSCRIPTION DEFINED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor>

Page 422: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

408 Oracle Corporation

<softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+202((?s).)*</searchPattern> <userType>ERHLR_FCODE_202</userType> <baseType>FAIL</baseType> <description>TOO MANY OCTDP SPECIFIED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+201((?s).)*</searchPattern> <userType>ERHLR_FCODE_201</userType> <baseType>FAIL</baseType> <description>NO SUBSCRIBER WITH THE GIVEN CONDITIONS</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+200((?s).)*</searchPattern> <userType>ERHLR_FCODE_200</userType> <baseType>FAIL</baseType> <description>MAXIMUM NUMBER OF GPRS SUBSCRIPTIONS EXCEEDED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+199((?s).)*</searchPattern> <userType>ERHLR_FCODE_199</userType> <baseType>FAIL</baseType> <description>MAXIMUM NUMBER OF SUBSCRIPTIONS EXCEEDED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+198((?s).)*</searchPattern> <userType>ERHLR_FCODE_198</userType> <baseType>FAIL</baseType>

Page 423: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

UserExitType.xml

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 409

<description>MAXIMUM NUMBER OF OCTDP REACHED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+197((?s).)*</searchPattern> <userType>ERHLR_FCODE_197</userType> <baseType>FAIL</baseType> <description>MAXIMUM NUMBER OF TCTDP REACHED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+196((?s).)*</searchPattern> <userType>ERHLR_FCODE_196</userType> <baseType>FAIL</baseType> <description>OCTDP ALREADY DEFINED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+195((?s).)*</searchPattern> <userType>ERHLR_FCODE_195</userType> <baseType>FAIL</baseType> <description>TCTDP ALREADY DEFINED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+194((?s).)*</searchPattern> <userType>ERHLR_FCODE_194</userType> <baseType>FAIL</baseType> <description>OCTDP VALUE NOT ALLOWED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor>

Page 424: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

410 Oracle Corporation

<searchPattern>((?s).)*FAULT CODE( )+193((?s).)*</searchPattern> <userType>ERHLR_FCODE_193</userType> <baseType>FAIL</baseType> <description>TCTDP VALUE NOT ALLOWED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+192((?s).)*</searchPattern> <userType>ERHLR_FCODE_192</userType> <baseType>FAIL</baseType> <description>TOO MANY TCTDP SPECIFIED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+191((?s).)*</searchPattern> <userType>ERHLR_FCODE_191</userType> <baseType>FAIL</baseType> <description>OCTDP NOT DEFINED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+190((?s).)*</searchPattern> <userType>ERHLR_FCODE_190</userType> <baseType>FAIL</baseType> <description>TCTDP NOT DEFINED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+189((?s).)*</searchPattern> <userType>ERHLR_FCODE_189</userType> <baseType>FAIL</baseType> <description>PARAMETER VALUE NOT SUPPORTED BY THIS EXCHANGE</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor>

Page 425: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

UserExitType.xml

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 411

<softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+188((?s).)*</searchPattern> <userType>ERHLR_FCODE_188</userType> <baseType>FAIL</baseType> <description>CAMEL SUBSCRIPTION DATA NOT DEFINED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+187((?s).)*</searchPattern> <userType>ERHLR_FCODE_187</userType> <baseType>FAIL</baseType> <description>UPDATING CAMEL SUBSCRIPTION DATA IN PROGRESS</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+186((?s).)*</searchPattern> <userType>ERHLR_FCODE_186</userType> <baseType>FAIL</baseType> <description>GSA IN USE</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+185((?s).)*</searchPattern> <userType>ERHLR_FCODE_185</userType> <baseType>FAIL</baseType> <description>GSA ALREADY DEFINED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+184((?s).)*</searchPattern> <userType>ERHLR_FCODE_184</userType> <baseType>FAIL</baseType>

Page 426: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

412 Oracle Corporation

<description>MAXIMUM NUMBER OF GSA DEFINED REACHED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+183((?s).)*</searchPattern> <userType>ERHLR_FCODE_183</userType> <baseType>FAIL</baseType> <description>PARAMETER NOT SUPPORTED BY THIS EXCHANGE</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+182((?s).)*</searchPattern> <userType>ERHLR_FCODE_182</userType> <baseType>FAIL</baseType> <description>GENERAL BEARER SERVICE NOT SUBSCRIBED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+181((?s).)*</searchPattern> <userType>ERHLR_FCODE_181</userType> <baseType>FAIL</baseType> <description>BS REPRESENTED BY BC NOT WITHIN THE SAME BSG</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+180((?s).)*</searchPattern> <userType>ERHLR_FCODE_180</userType> <baseType>FAIL</baseType> <description>Ericsson HLR FAULT CODE 180</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor>

Page 427: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

UserExitType.xml

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 413

</neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+179((?s).)*</searchPattern> <userType>ERHLR_FCODE_179</userType> <baseType>FAIL</baseType> <description>MASSIVE CHANGE OF SUBSCRIBER DATA NOT IN PROGRESS</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+178((?s).)*</searchPattern> <userType>ERHLR_FCODE_178</userType> <baseType>FAIL</baseType> <description>MASSIVE CHANGE OF SUBSCRIBER DATA IN PROGRESS</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+177((?s).)*</searchPattern> <userType>ERHLR_FCODE_177</userType> <baseType>FAIL</baseType> <description>CONDITIONAL SUBSCRIBER LIST PRINTOUT IN PROGRESS</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+176((?s).)*</searchPattern> <userType>ERHLR_FCODE_176</userType> <baseType>FAIL</baseType> <description>NEW SUBSCRIBER DATA VALUE INCOMPATIBLE</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+175((?s).)*</searchPattern> <userType>ERHLR_FCODE_175</userType> <baseType>FAIL</baseType> <description>GSA NOT DEFINED</description>

Page 428: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

414 Oracle Corporation

</userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+174((?s).)*</searchPattern> <userType>ERHLR_FCODE_174</userType> <baseType>FAIL</baseType> <description>TOO MANY DETECTION POINTS SPECIFIED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+173((?s).)*</searchPattern> <userType>ERHLR_FCODE_173</userType> <baseType>FAIL</baseType> <description>MAXIMUM NUMBER OF DETECTION POINTS EXCEEDED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+172((?s).)*</searchPattern> <userType>ERHLR_FCODE_172</userType> <baseType>FAIL</baseType> <description>DP VALUE NOT ALLOWED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+171((?s).)*</searchPattern> <userType>ERHLR_FCODE_171</userType> <baseType>FAIL</baseType> <description>DP NOT ACTIVATED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor>

Page 429: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

UserExitType.xml

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 415

<searchPattern>((?s).)*FAULT CODE( )+170((?s).)*</searchPattern> <userType>ERHLR_FCODE_170</userType> <baseType>FAIL</baseType> <description>DP ACTIVATED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+169((?s).)*</searchPattern> <userType>ERHLR_FCODE_169</userType> <baseType>FAIL</baseType> <description>DP NOT DEFINED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+168((?s).)*</searchPattern> <userType>ERHLR_FCODE_168</userType> <baseType>FAIL</baseType> <description>DP ALREADY DEFINED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+167((?s).)*</searchPattern> <userType>ERHLR_FCODE_167</userType> <baseType>FAIL</baseType> <description>UPDATING MOBILITY MANAGEMENT IN TRIGGER DATA IN PROGRESS</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+166((?s).)*</searchPattern> <userType>ERHLR_FCODE_166</userType> <baseType>FAIL</baseType> <description>Ericsson HLR FAULT CODE 166</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor>

Page 430: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

416 Oracle Corporation

<softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+165((?s).)*</searchPattern> <userType>ERHLR_FCODE_165</userType> <baseType>FAIL</baseType> <description>PARAMETER REDHLR NOT SUPPORTED BY THIS EXCHANGE</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+164((?s).)*</searchPattern> <userType>ERHLR_FCODE_164</userType> <baseType>FAIL</baseType> <description>Ericsson HLR FAULT CODE 164</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+163((?s).)*</searchPattern> <userType>ERHLR_FCODE_163</userType> <baseType>FAIL</baseType> <description>OPERATION NOT ALLOWED DUE TO CURRENT STATE</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+162((?s).)*</searchPattern> <userType>ERHLR_FCODE_162</userType> <baseType>FAIL</baseType> <description>REDUNDANCY NOT INITIATED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+161((?s).)*</searchPattern> <userType>ERHLR_FCODE_161</userType>

Page 431: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

UserExitType.xml

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 417

<baseType>FAIL</baseType> <description>HLR ALREADY HANDLING TRAFFIC</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+160((?s).)*</searchPattern> <userType>ERHLR_FCODE_160</userType> <baseType>FAIL</baseType> <description>REDUNDANCY ALREADY INITIATED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+159((?s).)*</searchPattern> <userType>ERHLR_FCODE_159</userType> <baseType>FAIL</baseType> <description>BC NOT PERMITTED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+158((?s).)*</searchPattern> <userType>ERHLR_FCODE_158</userType> <baseType>FAIL</baseType> <description>Ericsson HLR FAULT CODE 158</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+157((?s).)*</searchPattern> <userType>ERHLR_FCODE_157</userType> <baseType>FAIL</baseType> <description>Ericsson HLR FAULT CODE 157</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor>

Page 432: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

418 Oracle Corporation

</neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+156((?s).)*</searchPattern> <userType>ERHLR_FCODE_156</userType> <baseType>FAIL</baseType> <description>Ericsson HLR FAULT CODE 156</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+155((?s).)*</searchPattern> <userType>ERHLR_FCODE_155</userType> <baseType>FAIL</baseType> <description>STORAGE SHORTAGE IN LOG DATA FILE</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+154((?s).)*</searchPattern> <userType>ERHLR_FCODE_154</userType> <baseType>FAIL</baseType> <description>STORAGE SHORTAGE IN DATA CIRCUIT SYNCHRONOUS DATA FILE</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+153((?s).)*</searchPattern> <userType>ERHLR_FCODE_153</userType> <baseType>FAIL</baseType> <description>STORAGE SHORTAGE IN DATA CIRCUIT ASYNCHRONOUS DATA FILE</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+152((?s).)*</searchPattern> <userType>ERHLR_FCODE_152</userType> <baseType>FAIL</baseType> <description>Ericsson HLR FAULT CODE 152</description> </userDefinedExitType>

Page 433: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

UserExitType.xml

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 419

<userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+151((?s).)*</searchPattern> <userType>ERHLR_FCODE_151</userType> <baseType>FAIL</baseType> <description>STORAGE SHORTAGE IN FACSIMILE TRANSMISSION DATA FILE</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+150((?s).)*</searchPattern> <userType>ERHLR_FCODE_150</userType> <baseType>FAIL</baseType> <description>STORAGE SHORTAGE IN PDP CONTEXT DATA FILE</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+149((?s).)*</searchPattern> <userType>ERHLR_FCODE_149</userType> <baseType>FAIL</baseType> <description>STORAGE SHORTAGE IN GPRS DATA FILE</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+148((?s).)*</searchPattern> <userType>ERHLR_FCODE_148</userType> <baseType>FAIL</baseType> <description>ENAP NOT INITIATED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+147((?s).)*</searchPattern>

Page 434: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

420 Oracle Corporation

<userType>ERHLR_FCODE_147</userType> <baseType>FAIL</baseType> <description>ENAP ALREADY INITIATED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+146((?s).)*</searchPattern> <userType>ERHLR_FCODE_146</userType> <baseType>FAIL</baseType> <description>TOO MANY NOTIFICATION CASES SPECIFIED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+145((?s).)*</searchPattern> <userType>ERHLR_FCODE_145</userType> <baseType>FAIL</baseType> <description>NO TEMPORARY USSD TEXT STRING DATA</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+144((?s).)*</searchPattern> <userType>ERHLR_FCODE_144</userType> <baseType>FAIL</baseType> <description>NO USSD TEXT STRING TO ACTIVATE</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+143((?s).)*</searchPattern> <userType>ERHLR_FCODE_143</userType> <baseType>FAIL</baseType> <description>SPECIFICATION PROCEDURE IN PROGRESS</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology>

Page 435: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

UserExitType.xml

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 421

<neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+142((?s).)*</searchPattern> <userType>ERHLR_FCODE_142</userType> <baseType>FAIL</baseType> <description>MAXIMUM USSD TEXT STRING LENGTH EXCEEDED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+141((?s).)*</searchPattern> <userType>ERHLR_FCODE_141</userType> <baseType>FAIL</baseType> <description>SPECIFICATION PROCEDURE NOT INITIATED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+140((?s).)*</searchPattern> <userType>ERHLR_FCODE_140</userType> <baseType>FAIL</baseType> <description>NOTIFICATION CASE DOES NOT EXIST</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+139((?s).)*</searchPattern> <userType>ERHLR_FCODE_139</userType> <baseType>FAIL</baseType> <description>ALPHABET NOT SUPPORTED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+138((?s).)*</searchPattern> <userType>ERHLR_FCODE_138</userType> <baseType>FAIL</baseType> <description>USSD APPLICATION NOT KNOWN BY USSD TEXT STRING ADMINISTRATION FUNCTION</description> </userDefinedExitType>

Page 436: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

422 Oracle Corporation

<userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+137((?s).)*</searchPattern> <userType>ERHLR_FCODE_137</userType> <baseType>FAIL</baseType> <description>Ericsson HLR FAULT CODE 137</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+136((?s).)*</searchPattern> <userType>ERHLR_FCODE_136</userType> <baseType>FAIL</baseType> <description>VLR ADDRESS NOT FOUND</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+135((?s).)*</searchPattern> <userType>ERHLR_FCODE_135</userType> <baseType>FAIL</baseType> <description>PRIVATE TAG DATA MISMATCH</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+134((?s).)*</searchPattern> <userType>ERHLR_FCODE_134</userType> <baseType>FAIL</baseType> <description>PRIVATE TAG NOT DEFINED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+133((?s).)*</searchPattern> <userType>ERHLR_FCODE_133</userType>

Page 437: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

UserExitType.xml

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 423

<baseType>FAIL</baseType> <description>SPECIFIC DATA AREA IDENTITY NOT DEFINED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+132((?s).)*</searchPattern> <userType>ERHLR_FCODE_132</userType> <baseType>FAIL</baseType> <description>PLMN SPECIFIC SUPPLEMENTARY SERVICE DATA MISMATCH</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+131((?s).)*</searchPattern> <userType>ERHLR_FCODE_131</userType> <baseType>FAIL</baseType> <description>PLMN SPECIFIC SUPPLEMENTARY SERVICE NOT DEFINED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+130((?s).)*</searchPattern> <userType>ERHLR_FCODE_130</userType> <baseType>FAIL</baseType> <description>PRIVATE TAG ALREADY DEFINED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+129((?s).)*</searchPattern> <userType>ERHLR_FCODE_129</userType> <baseType>FAIL</baseType> <description>PRIVATE TAG NOT RECOGNIZED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad>

Page 438: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

424 Oracle Corporation

<technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+128((?s).)*</searchPattern> <userType>ERHLR_FCODE_128</userType> <baseType>FAIL</baseType> <description>PLMN SPECIFIC SUPPLEMENTARY SERVICE CODE ALREADY DEFINED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+127((?s).)*</searchPattern> <userType>ERHLR_FCODE_127</userType> <baseType>FAIL</baseType> <description>PLMN SPECIFIC SUPPLEMENTARY SERVICE ALREADY DEFINED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+126((?s).)*</searchPattern> <userType>ERHLR_FCODE_126</userType> <baseType>FAIL</baseType> <description>PLMN SPECIFIC SUPPLEMENTARY SERVICE NOT RECOGNIZED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+125((?s).)*</searchPattern> <userType>ERHLR_FCODE_125</userType> <baseType>FAIL</baseType> <description>SUBSCRIBER ASSOCIATED TO THE PICI</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+124((?s).)*</searchPattern> <userType>ERHLR_FCODE_124</userType>

Page 439: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

UserExitType.xml

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 425

<baseType>FAIL</baseType> <description>MAXIMUM NUMBER OF IXC REACHED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+123((?s).)*</searchPattern> <userType>ERHLR_FCODE_123</userType> <baseType>FAIL</baseType> <description>IXC IS ASSIGNED TO A PICI</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+122((?s).)*</searchPattern> <userType>ERHLR_FCODE_122</userType> <baseType>FAIL</baseType> <description>PICI-IXC RELATION DOES NOT EXIST</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+121((?s).)*</searchPattern> <userType>ERHLR_FCODE_121</userType> <baseType>FAIL</baseType> <description>CIC NOT ASSIGNED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+120((?s).)*</searchPattern> <userType>ERHLR_FCODE_120</userType> <baseType>FAIL</baseType> <description>CIC ALREADY ASSIGNED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor>

Page 440: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

426 Oracle Corporation

</neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+119((?s).)*</searchPattern> <userType>ERHLR_FCODE_119</userType> <baseType>FAIL</baseType> <description>IXC NOT DEFINED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+118((?s).)*</searchPattern> <userType>ERHLR_FCODE_118</userType> <baseType>FAIL</baseType> <description>IXC ALREADY DEFINED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+117((?s).)*</searchPattern> <userType>ERHLR_FCODE_117</userType> <baseType>FAIL</baseType> <description>COLLECTIVE BASIC SERVICE GROUP NOT ALLOWED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+116((?s).)*</searchPattern> <userType>ERHLR_FCODE_116</userType> <baseType>FAIL</baseType> <description>INDEX ERASURE NOT ALLOWED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+115((?s).)*</searchPattern> <userType>ERHLR_FCODE_115</userType> <baseType>FAIL</baseType> <description>RESTRICTION NOT ALLOWED</description> </userDefinedExitType> <userDefinedExitType>

Page 441: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

UserExitType.xml

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 427

<neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+114((?s).)*</searchPattern> <userType>ERHLR_FCODE_114</userType> <baseType>FAIL</baseType> <description>ORIGIN NOT DEFINED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+113((?s).)*</searchPattern> <userType>ERHLR_FCODE_113</userType> <baseType>FAIL</baseType> <description>MISMATCH IN DATA BETWEEN ANALYSIS AND PRE-ANALYSIS</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+112((?s).)*</searchPattern> <userType>ERHLR_FCODE_112</userType> <baseType>FAIL</baseType> <description>CHARACTERISTIC NOT DEFINED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+111((?s).)*</searchPattern> <userType>ERHLR_FCODE_111</userType> <baseType>FAIL</baseType> <description>ORIGIN ALREADY DEFINED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+110((?s).)*</searchPattern> <userType>ERHLR_FCODE_110</userType>

Page 442: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

428 Oracle Corporation

<baseType>FAIL</baseType> <description>ILLEGAL COMBINATION OF PARAMETERS</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+109((?s).)*</searchPattern> <userType>ERHLR_FCODE_109</userType> <baseType>FAIL</baseType> <description>ORIGIN DEFINED IN PRE-ANALYSIS OF NUMBER SERIES</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+108((?s).)*</searchPattern> <userType>ERHLR_FCODE_108</userType> <baseType>FAIL</baseType> <description>NUMBER SERIES NOT DEFINED WITHIN ORIGIN</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+107((?s).)*</searchPattern> <userType>ERHLR_FCODE_107</userType> <baseType>FAIL</baseType> <description>STORAGE SHORTAGE IN ANALYSIS FILE</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+106((?s).)*</searchPattern> <userType>ERHLR_FCODE_106</userType> <baseType>FAIL</baseType> <description>CHECKING OF ANALYSIS FILE IN PROGRESS</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology>

Page 443: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

UserExitType.xml

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 429

<neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+105((?s).)*</searchPattern> <userType>ERHLR_FCODE_105</userType> <baseType>FAIL</baseType> <description>ORIGIN IS USED BY ANOTHER USER FUNCTION</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+104((?s).)*</searchPattern> <userType>ERHLR_FCODE_104</userType> <baseType>FAIL</baseType> <description>CHARACTERISTIC VALUE NOT RECOGNIZED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+103((?s).)*</searchPattern> <userType>ERHLR_FCODE_103</userType> <baseType>FAIL</baseType> <description>USER FUNCTION NOT RECOGNIZED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+102((?s).)*</searchPattern> <userType>ERHLR_FCODE_102</userType> <baseType>FAIL</baseType> <description>ODD NUMBER OF CHARACTERS IN SUBADDRESS</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+101((?s).)*</searchPattern> <userType>ERHLR_FCODE_101</userType> <baseType>FAIL</baseType> <description>Ericsson HLR FAULT CODE 101</description> </userDefinedExitType> <userDefinedExitType>

Page 444: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

430 Oracle Corporation

<neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+100((?s).)*</searchPattern> <userType>ERHLR_FCODE_100</userType> <baseType>FAIL</baseType> <description>ZONE CODE NOT DEFINED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+99((?s).)*</searchPattern> <userType>ERHLR_FCODE_99</userType> <baseType>FAIL</baseType> <description>ZONE CODE ALREADY DEFINED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+98((?s).)*</searchPattern> <userType>ERHLR_FCODE_98</userType> <baseType>FAIL</baseType> <description>RSAI DOES NOT EXIST IN ZONE CODE SET</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+97((?s).)*</searchPattern> <userType>ERHLR_FCODE_97</userType> <baseType>FAIL</baseType> <description>ZONE CODE DELETION NOT ALLOWED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+96((?s).)*</searchPattern> <userType>ERHLR_FCODE_96</userType> <baseType>FAIL</baseType>

Page 445: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

UserExitType.xml

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 431

<description>ZONE CODE SET NOT DEFINED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+95((?s).)*</searchPattern> <userType>ERHLR_FCODE_95</userType> <baseType>FAIL</baseType> <description>ZONE CODE INCLUDED MORE THAN ONCE</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+94((?s).)*</searchPattern> <userType>ERHLR_FCODE_94</userType> <baseType>FAIL</baseType> <description>ZONE CODE SET TIED TO SUBSCRIBERS</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+93((?s).)*</searchPattern> <userType>ERHLR_FCODE_93</userType> <baseType>FAIL</baseType> <description>MAXIMUM NUMBER OF RSAI EXCEEDED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+92((?s).)*</searchPattern> <userType>ERHLR_FCODE_92</userType> <baseType>FAIL</baseType> <description>MAXIMUM NUMBER OF ZONE CODES EXCEEDED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor>

Page 446: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

432 Oracle Corporation

<searchPattern>((?s).)*FAULT CODE( )+91((?s).)*</searchPattern> <userType>ERHLR_FCODE_91</userType> <baseType>FAIL</baseType> <description>RSAI ALREADY EXISTS IN ZONE CODE SET</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+90((?s).)*</searchPattern> <userType>ERHLR_FCODE_90</userType> <baseType>FAIL</baseType> <description>INTERLOCK CODE NOT DEFINED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+89((?s).)*</searchPattern> <userType>ERHLR_FCODE_89</userType> <baseType>FAIL</baseType> <description>PCUG NOT ALLOWED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+88((?s).)*</searchPattern> <userType>ERHLR_FCODE_88</userType> <baseType>FAIL</baseType> <description>PCUG NOT DEFINED AS INDEX</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+87((?s).)*</searchPattern> <userType>ERHLR_FCODE_87</userType> <baseType>FAIL</baseType> <description>BSG NOT DEFINED WITHIN GIVEN PCUG</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad>

Page 447: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

UserExitType.xml

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 433

<technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+86((?s).)*</searchPattern> <userType>ERHLR_FCODE_86</userType> <baseType>FAIL</baseType> <description>BSG NOT DEFINED WITHIN ANY CLOSED USER GROUP</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+85((?s).)*</searchPattern> <userType>ERHLR_FCODE_85</userType> <baseType>FAIL</baseType> <description>MSISDN NOT DEFINED AS CLOSED USER GROUP MEMBER</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+84((?s).)*</searchPattern> <userType>ERHLR_FCODE_84</userType> <baseType>FAIL</baseType> <description>INDEX NOT DEFINED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+83((?s).)*</searchPattern> <userType>ERHLR_FCODE_83</userType> <baseType>FAIL</baseType> <description>BASIC SERVICE GROUP ERASURE NOT ALLOWED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+82((?s).)*</searchPattern> <userType>ERHLR_FCODE_82</userType> <baseType>FAIL</baseType>

Page 448: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

434 Oracle Corporation

<description>MAXIMUM NUMBER OF CLOSED USER GROUPS REACHED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+81((?s).)*</searchPattern> <userType>ERHLR_FCODE_81</userType> <baseType>FAIL</baseType> <description>CLOSED USER GROUP NOT APPLICABLE TO ANY BSG</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+80((?s).)*</searchPattern> <userType>ERHLR_FCODE_80</userType> <baseType>FAIL</baseType> <description>UPDATING CLOSED USER GROUP DATA</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+79((?s).)*</searchPattern> <userType>ERHLR_FCODE_79</userType> <baseType>FAIL</baseType> <description>BASIC SERVICE GROUP INCLUDED MORE THAN ONCE</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+78((?s).)*</searchPattern> <userType>ERHLR_FCODE_78</userType> <baseType>FAIL</baseType> <description>INTERLOCK CODE ALREADY DEFINED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad>

Page 449: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

UserExitType.xml

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 435

<technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+77((?s).)*</searchPattern> <userType>ERHLR_FCODE_77</userType> <baseType>FAIL</baseType> <description>INDEX ALREADY DEFINED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+76((?s).)*</searchPattern> <userType>ERHLR_FCODE_76</userType> <baseType>FAIL</baseType> <description>CLOSED USER GROUP NOT APPLICABLE TO BSG</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+75((?s).)*</searchPattern> <userType>ERHLR_FCODE_75</userType> <baseType>DELAYED_FAIL</baseType> <description>FUNCTIONALITY NOT SUPPORTED BY THIS EXCHANGE</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+74((?s).)*</searchPattern> <userType>ERHLR_FCODE_74</userType> <baseType>FAIL</baseType> <description>BC RESERVED FOR SPECIFIC BS</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+73((?s).)*</searchPattern> <userType>ERHLR_FCODE_73</userType> <baseType>FAIL</baseType> <description>SUBSCRIBER DISCONNECTION IN PROGRESS</description>

Page 450: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

436 Oracle Corporation

</userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+72((?s).)*</searchPattern> <userType>ERHLR_FCODE_72</userType> <baseType>FAIL</baseType> <description>FILE OUTPUT NOT INITIATED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+71((?s).)*</searchPattern> <userType>ERHLR_FCODE_71</userType> <baseType>FAIL</baseType> <description>Ericsson HLR Fault Code 71</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+70((?s).)*</searchPattern> <userType>ERHLR_FCODE_70</userType> <baseType>FAIL</baseType> <description>STORAGE SHORTAGE IN CHANGEOVER DATA FILE</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+69((?s).)*</searchPattern> <userType>ERHLR_FCODE_69</userType> <baseType>FAIL</baseType> <description>CHARACTERISTIC NOT RECOGNIZED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+68((?s).)*</searchPattern>

Page 451: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

UserExitType.xml

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 437

<userType>ERHLR_FCODE_68</userType> <baseType>FAIL</baseType> <description>BC REPRESENTS A BS NOT SUPPORTED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+67((?s).)*</searchPattern> <userType>ERHLR_FCODE_67</userType> <baseType>FAIL</baseType> <description>BC DOES NOT REPRESENT ANY BS</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+66((?s).)*</searchPattern> <userType>ERHLR_FCODE_66</userType> <baseType>FAIL</baseType> <description>CHANGEOVER STILL PENDING</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+65((?s).)*</searchPattern> <userType>ERHLR_FCODE_65</userType> <baseType>FAIL</baseType> <description>CHANGEOVER ALREADY EXECUTED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+64((?s).)*</searchPattern> <userType>ERHLR_FCODE_64</userType> <baseType>FAIL</baseType> <description>CHANGEOVER NOT INITIATED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology>

Page 452: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

438 Oracle Corporation

<neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+63((?s).)*</searchPattern> <userType>ERHLR_FCODE_63</userType> <baseType>FAIL</baseType> <description>CHANGEOVER ALREADY INITIATED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+62((?s).)*</searchPattern> <userType>ERHLR_FCODE_62</userType> <baseType>FAIL</baseType> <description>SUPPLEMENTARY SERVICE NOT REGISTERED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+61((?s).)*</searchPattern> <userType>ERHLR_FCODE_61</userType> <baseType>FAIL</baseType> <description>SS NOT APPLICABLE TO ANY SUBSCRIBED BASIC SERVICE</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+60((?s).)*</searchPattern> <userType>ERHLR_FCODE_60</userType> <baseType>FAIL</baseType> <description>Ericsson HLR Fault Code 60</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+59((?s).)*</searchPattern> <userType>ERHLR_FCODE_59</userType> <baseType>FAIL</baseType> <description>INCOMPATIBILITY AMONGST PARAMETER UNITS</description> </userDefinedExitType>

Page 453: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

UserExitType.xml

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 439

<userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+58((?s).)*</searchPattern> <userType>ERHLR_FCODE_58</userType> <baseType>FAIL</baseType> <description>Ericsson HLR Fault Code 58</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+57((?s).)*</searchPattern> <userType>ERHLR_FCODE_57</userType> <baseType>FAIL</baseType> <description>BC OUT OF RANGE</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+56((?s).)*</searchPattern> <userType>ERHLR_FCODE_56</userType> <baseType>FAIL</baseType> <description>BS NOT SUPPORTED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+55((?s).)*</searchPattern> <userType>ERHLR_FCODE_55</userType> <baseType>FAIL</baseType> <description>BC NOT DEFINED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+54((?s).)*</searchPattern> <userType>ERHLR_FCODE_54</userType>

Page 454: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

440 Oracle Corporation

<baseType>FAIL</baseType> <description>STORAGE SHORTAGE IN AREA FILE</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+53((?s).)*</searchPattern> <userType>ERHLR_FCODE_53</userType> <baseType>FAIL</baseType> <description>MSISDN TYPE INCORRECT</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+52((?s).)*</searchPattern> <userType>ERHLR_FCODE_52</userType> <baseType>FAIL</baseType> <description>IMSI TYPE INCORRECT</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+51((?s).)*</searchPattern> <userType>ERHLR_FCODE_51</userType> <baseType>FAIL</baseType> <description>STORAGE SHORTAGE IN DATA FILE</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+50((?s).)*</searchPattern> <userType>ERHLR_FCODE_50</userType> <baseType>FAIL</baseType> <description>CHARACTERISTIC DOES NOT EXIST FOR THE AREA</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology>

Page 455: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

UserExitType.xml

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 441

<neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+49((?s).)*</searchPattern> <userType>ERHLR_FCODE_49</userType> <baseType>FAIL</baseType> <description>CHARACTERISTIC ALREADY GIVEN TO THE AREA</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+48((?s).)*</searchPattern> <userType>ERHLR_FCODE_48</userType> <baseType>FAIL</baseType> <description>MSISDN IS NOT AN ADDITIONAL MSISDN</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+47((?s).)*</searchPattern> <userType>ERHLR_FCODE_47</userType> <baseType>FAIL</baseType> <description>SUBSCRIPTION LIMIT OF NUMBERS REACHED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+46((?s).)*</searchPattern> <userType>ERHLR_FCODE_46</userType> <baseType>FAIL</baseType> <description>NO PENDING CHANGEOVER</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+45((?s).)*</searchPattern> <userType>ERHLR_FCODE_45</userType> <baseType>FAIL</baseType> <description>ADDITIONAL MSISDN TIED TO BC</description> </userDefinedExitType> <userDefinedExitType>

Page 456: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

442 Oracle Corporation

<neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+44((?s).)*</searchPattern> <userType>ERHLR_FCODE_44</userType> <baseType>FAIL</baseType> <description>SS NOT APPLICABLE TO SPECIFIED BASIC SERVICE GROUP</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+43((?s).)*</searchPattern> <userType>ERHLR_FCODE_43</userType> <baseType>FAIL</baseType> <description>BASIC SERVICE GROUP NOT RECOGNIZED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+42((?s).)*</searchPattern> <userType>ERHLR_FCODE_42</userType> <baseType>FAIL</baseType> <description>DATE NOT ACCEPTABLE</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+41((?s).)*</searchPattern> <userType>ERHLR_FCODE_41</userType> <baseType>FAIL</baseType> <description>NO BASIC SERVICE SUBSCRIBED WITHIN SPECIFIED BSG</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+40((?s).)*</searchPattern>

Page 457: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

UserExitType.xml

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 443

<userType>ERHLR_FCODE_40</userType> <baseType>FAIL</baseType> <description>ALARM HAS NOT BEEN GIVEN</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+39((?s).)*</searchPattern> <userType>ERHLR_FCODE_39</userType> <baseType>FAIL</baseType> <description>DATA MISMATCH</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+38((?s).)*</searchPattern> <userType>ERHLR_FCODE_38</userType> <baseType>FAIL</baseType> <description>HLR EXCHANGE PROPERTY NOT ACCEPTED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+37((?s).)*</searchPattern> <userType>ERHLR_FCODE_37</userType> <baseType>FAIL</baseType> <description>HLR EXCHANGE PROPERTY DESIGNATION NOT RECOGNIZED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+36((?s).)*</searchPattern> <userType>ERHLR_FCODE_36</userType> <baseType>FAIL</baseType> <description>BC ALREADY DEFINED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad>

Page 458: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

444 Oracle Corporation

<technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+35((?s).)*</searchPattern> <userType>ERHLR_FCODE_35</userType> <baseType>FAIL</baseType> <description>Ericsson HLR Fault Code 35</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+34((?s).)*</searchPattern> <userType>ERHLR_FCODE_34</userType> <baseType>FAIL</baseType> <description>ZEROING OR COPYING HAS BEEN INTERRUPTED BY A SYSTEM RESTART</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+33((?s).)*</searchPattern> <userType>ERHLR_FCODE_33</userType> <baseType>FAIL</baseType> <description>OPERATION NOT ALLOWED DUE TO CURRENT LOCATION</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+32((?s).)*</searchPattern> <userType>ERHLR_FCODE_32</userType> <baseType>FAIL</baseType> <description>SUBSCRIBER DATA NOT APPLICABLE</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+31((?s).)*</searchPattern> <userType>ERHLR_FCODE_31</userType> <baseType>FAIL</baseType>

Page 459: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

UserExitType.xml

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 445

<description>SUBSCRIBER DATA INCLUDED MORE THAN ONCE</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+30((?s).)*</searchPattern> <userType>ERHLR_FCODE_30</userType> <baseType>FAIL</baseType> <description>STORAGE SHORTAGE IN MODIFICATION MODULES</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+29((?s).)*</searchPattern> <userType>ERHLR_FCODE_29</userType> <baseType>FAIL</baseType> <description>SPECIFIED END RESULT OF ANALYSIS NOT ALLOWED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+28((?s).)*</searchPattern> <userType>ERHLR_FCODE_28</userType> <baseType>FAIL</baseType> <description>ANALYSIS POINT CANNOT BE REACHED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+27((?s).)*</searchPattern> <userType>ERHLR_FCODE_27</userType> <baseType>FAIL</baseType> <description>OPERATION NOT ALLOWED DUE TO INTERACTION</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor>

Page 460: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

446 Oracle Corporation

</neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+26((?s).)*</searchPattern> <userType>ERHLR_FCODE_26</userType> <baseType>FAIL</baseType> <description>FORWARDED-TO NUMBER MISSING</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+25((?s).)*</searchPattern> <userType>ERHLR_FCODE_25</userType> <baseType>FAIL</baseType> <description>PARAMETER NOT APPLICABLE</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+24((?s).)*</searchPattern> <userType>ERHLR_FCODE_24</userType> <baseType>FAIL</baseType> <description>STORAGE SHORTAGE IN FORWARDED-TO NUMBER ANALYSIS FILE</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+23((?s).)*</searchPattern> <userType>ERHLR_FCODE_23</userType> <baseType>FAIL</baseType> <description>PROTECTION TIME ELAPSED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+22((?s).)*</searchPattern> <userType>ERHLR_FCODE_22</userType> <baseType>FAIL</baseType> <description>NON-OPERATING TABLE PROTECTED</description> </userDefinedExitType> <userDefinedExitType>

Page 461: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

UserExitType.xml

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 447

<neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+21((?s).)*</searchPattern> <userType>ERHLR_FCODE_21</userType> <baseType>FAIL</baseType> <description>OFA ALREADY DEFINED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+20((?s).)*</searchPattern> <userType>ERHLR_FCODE_20</userType> <baseType>FAIL</baseType> <description>OFA NOT DEFINED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+19((?s).)*</searchPattern> <userType>ERHLR_FCODE_19</userType> <baseType>FAIL</baseType> <description>FORWARDED-TO NUMBER RESTRICTED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+18((?s).)*</searchPattern> <userType>ERHLR_FCODE_18</userType> <baseType>FAIL</baseType> <description>SUPPLEMENTARY SERVICE NOT PROVIDED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+17((?s).)*</searchPattern> <userType>ERHLR_FCODE_17</userType> <baseType>FAIL</baseType>

Page 462: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

448 Oracle Corporation

<description>SUPPLEMENTARY SERVICE NOT APPLICABLE</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+16((?s).)*</searchPattern> <userType>ERHLR_FCODE_16</userType> <baseType>FAIL</baseType> <description>SUPPLEMENTARY SERVICE NOT RECOGNIZED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+15((?s).)*</searchPattern> <userType>ERHLR_FCODE_15</userType> <baseType>FAIL</baseType> <description>SUBSCRIBER DATA NOT RECOGNIZED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+14((?s).)*</searchPattern> <userType>ERHLR_FCODE_14</userType> <baseType>FAIL</baseType> <description>MSISDN NOT DEFINED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+13((?s).)*</searchPattern> <userType>ERHLR_FCODE_13</userType> <baseType>FAIL</baseType> <description>IMSI NOT DEFINED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor>

Page 463: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

UserExitType.xml

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 449

<searchPattern>((?s).)*FAULT CODE( )+12((?s).)*</searchPattern> <userType>ERHLR_FCODE_12</userType> <baseType>FAIL</baseType> <description>THERE IS AN MSISDN PREFIX OF THE MSISDN GIVEN</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+11((?s).)*</searchPattern> <userType>ERHLR_FCODE_11</userType> <baseType>FAIL</baseType> <description>MSISDN IS PREFIX OF EXISTING MSISDN</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+10((?s).)*</searchPattern> <userType>ERHLR_FCODE_10</userType> <baseType>FAIL</baseType> <description>THERE IS AN IMSI PREFIX OF THE IMSI GIVEN</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+9((?s).)*</searchPattern> <userType>ERHLR_FCODE_9</userType> <baseType>FAIL</baseType> <description>IMSI IS PREFIX OF EXISTING IMSI</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+8((?s).)*</searchPattern> <userType>ERHLR_FCODE_8</userType> <baseType>FAIL</baseType> <description>TIME OUT WHILE FETCHING AUTHENTICATION DATA</description> </userDefinedExitType> <userDefinedExitType>

Page 464: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

450 Oracle Corporation

<neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+7((?s).)*</searchPattern> <userType>ERHLR_FCODE_7</userType> <baseType>FAIL</baseType> <description>NO CONNECTION TO AUTHENTICATION CENTRE</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+6((?s).)*</searchPattern> <userType>ERHLR_FCODE_6</userType> <baseType>FAIL</baseType> <description>SUBSCRIBER AUTHENTICATION DATA NOT FOUND</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+5((?s).)*</searchPattern> <userType>ERHLR_FCODE_5</userType> <baseType>FAIL</baseType> <description>STORAGE SHORTAGE IN THE MSISDN ANALYSIS FILE</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+4((?s).)*</searchPattern> <userType>ERHLR_FCODE_4</userType> <baseType>FAIL</baseType> <description>STORAGE SHORTAGE IN THE IMSI ANALYSIS FILE</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+3((?s).)*</searchPattern>

Page 465: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

UserExitType.xml

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 451

<userType>ERHLR_FCODE_3</userType> <baseType>FAIL</baseType> <description>STORAGE SHORTAGE IN THE SUBSCRIBER DATA FILE</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+2((?s).)*</searchPattern> <userType>ERHLR_FCODE_2</userType> <baseType>FAIL</baseType> <description>MSISDN ALREADY DEFINED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+1((?s).)*</searchPattern> <userType>ERHLR_FCODE_1</userType> <baseType>SOFT_FAIL</baseType> <description>IMSI ALREADY DEFINED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+486((?s).)*</searchPattern> <userType>ERHLR_FCODE_486</userType> <baseType>FAIL</baseType> <description>STORAGE SHORTAGE IN TERMINATING CAMEL PHASE 4 DATA FILE</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+485((?s).)*</searchPattern> <userType>ERHLR_FCODE_485</userType> <baseType>FAIL</baseType> <description>STORAGE SHORTAGE IN ORIGINATING CAMEL PHASE 4 DATA FILE</description> </userDefinedExitType> <userDefinedExitType>

Page 466: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

452 Oracle Corporation

<neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+487((?s).)*</searchPattern> <userType>ERHLR_FCODE_487</userType> <baseType>FAIL</baseType> <description>STORAGE SHORTAGE IN VMSC TERMINATING CAMEL PHASE 4 DATA FILE</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+446((?s).)*</searchPattern> <userType>ERHLR_FCODE_446</userType> <baseType>FAIL</baseType> <description>FNUM VALUE NOT ALLOWED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+489((?s).)*</searchPattern> <userType>ERHLR_FCODE_489</userType> <baseType>FAIL</baseType> <description>FNUM VALUE INCOMPATIBLE WITH OFA VALUE</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+456((?s).)*</searchPattern> <userType>ERHLR_FCODE_456</userType> <baseType>FAIL</baseType> <description>SUBSCRIPTION BELONGS TO A MULTIPLE SUBSCRIPTION</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+478((?s).)*</searchPattern>

Page 467: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

UserExitType.xml

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 453

<userType>ERHLR_FCODE_478</userType> <baseType>FAIL</baseType> <description>LCS ADDRESS NOT DEFINED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+302((?s).)*</searchPattern> <userType>ERHLR_FCODE_302</userType> <baseType>FAIL</baseType> <description>SUBSCRIBER GMLC ADDRESS ALREADY DEFINED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+291((?s).)*</searchPattern> <userType>ERHLR_FCODE_291</userType> <baseType>FAIL</baseType> <description>SUBSCRIBER LCS PRIVACY CLASS ALREADY DEFINED</description> </userDefinedExitType> <userDefinedExitType> <neDescriptor> <softwareLoad>R12-0</softwareLoad> <technology>HLR</technology> <neVendor>ERIC</neVendor> </neDescriptor> <searchPattern>((?s).)*FAULT CODE( )+429((?s).)*</searchPattern> <userType>ERHLR_FCODE_429</userType> <baseType>FAIL</baseType> <description>SUBSCRIBER SERVICE TYPE NOT DEFINED</description> </userDefinedExitType></serviceModel>

Page 468: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 3: Atomic Service Description Layer (ASDL) Commands

454 Oracle Corporation

Page 469: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 455

4

Service Definition

The Ericsson HLR cartridge contains a set of CSDLs that map to one or more ASDL commands. You can also create additional CSDLs that map to existing and newly-created ASDLs. An upstream system can assemble any of these CSDL commands onto a work order for provisioning.

This chapter presents detailed information on the CSDL parameters that we provide in this cartridge. The following table lists and describes the type of parameter information that is included.

Table 257: ASDL parameter information

Item Description

Parameter Name Identifies the parameter that is configured for the stated service.

Description Describes the parameter.

Range Describes or lists the range of values that can be used to satisfy this parameter.

Default Value Configures a default value for the parameter so that it is not mandatory for the upstream system to provide a value.

Page 470: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 4: Service Definition

456 Oracle Corporation

Type Indicates one of the following parameter types:

S—Scalar, specifies the parameter label transmitted on the ASDL command. Scalar parameters are conventional name-value pair parameters.C—Compound, specifies the base name of the compound parameter transmitted on the ASDL command. A compound parameter contains structures or arrays of information that are represented by a particular structure name or compound parameter name. Each compound parameter can contain a large number of elements. If you use compound parameters, you only require a single entry in the ASAP translation tables to call the compound parameter and all its associated parameter elements.I—Indexed, identifies a parameter that contains a sequential numerical index value to tell the SARM that it should execute the same operation (for example, an ASDL command) for all occurrences of that index. Consequently, if there are several options on a particular CSDL command (OPT1, OPT2, OPT3, etc.), you can specify the OPT parameter as an indexed parameter. When you specify the OPT parameter as an indexed parameter, the SARM generates several occurrences of that same ASDL command and each command has a different value for the option being transmitted to the NEP.

For more information on parameter types, refer to the ASAP Developer Reference.

Table 257: ASDL parameter information

Item Description

Page 471: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

CSDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 457

For a detailed description of the Required and Optional parameter classifications, refer to the ASAP Administration Guide.

CSDL commandsThis cartridge provides the following CSDL Commands:

C_ERIC-HLR_R12-0_ACT_BAICC_ERIC-HLR_R12-0_ACT_BAOCC_ERIC-HLR_R12-0_ACT_BICROC_ERIC-HLR_R12-0_ACT_BOICC_ERIC-HLR_R12-0_ACT_BOIEXHC_ERIC-HLR_R12-0_ACT_BS21C_ERIC-HLR_R12-0_ACT_BS22C_ERIC-HLR_R12-0_ACT_BS23C_ERIC-HLR_R12-0_ACT_BS24C_ERIC-HLR_R12-0_ACT_BS25C_ERIC-HLR_R12-0_ACT_BS26C_ERIC-HLR_R12-0_ACT_BS2GC_ERIC-HLR_R12-0_ACT_BS31C_ERIC-HLR_R12-0_ACT_BS32C_ERIC-HLR_R12-0_ACT_BS33C_ERIC-HLR_R12-0_ACT_BS34C_ERIC-HLR_R12-0_ACT_BS3GC_ERIC-HLR_R12-0_ACT_CAWC_ERIC-HLR_R12-0_ACT_CFB

Class Indicates one of the following parameter classifications:

R—Required scalar parameterO—Optional scalar parameterC—Required compound parameterN—Optional compound parameterM—Mandatory indexed parameterI—Optional indexed parameterS—Parameter count

Table 257: ASDL parameter information

Item Description

Page 472: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 4: Service Definition

458 Oracle Corporation

C_ERIC-HLR_R12-0_ACT_CFNRCC_ERIC-HLR_R12-0_ACT_CFNRYC_ERIC-HLR_R12-0_ACT_CFUC_ERIC-HLR_R12-0_ACT_CLIPC_ERIC-HLR_R12-0_ACT_CLIRC_ERIC-HLR_R12-0_ACT_COLPC_ERIC-HLR_R12-0_ACT_COLRC_ERIC-HLR_R12-0_ACT_EMLPPC_ERIC-HLR_R12-0_ACT_HOLDC_ERIC-HLR_R12-0_ACT_ICIC_ERIC-HLR_R12-0_ACT_MPTYC_ERIC-HLR_R12-0_ACT_OBAC_ERIC-HLR_R12-0_ACT_OBOPREC_ERIC-HLR_R12-0_ACT_OBOPRIC_ERIC-HLR_R12-0_ACT_OBSSMC_ERIC-HLR_R12-0_ACT_OBZIC_ERIC-HLR_R12-0_ACT_OINC_ERIC-HLR_R12-0_ACT_OSB1C_ERIC-HLR_R12-0_ACT_OSB2C_ERIC-HLR_R12-0_ACT_OSB3C_ERIC-HLR_R12-0_ACT_OSB4C_ERIC-HLR_R12-0_ACT_PAIC_ERIC-HLR_R12-0_ACT_SOCFRCC_ERIC-HLR_R12-0_ACT_SOCFUC_ERIC-HLR_R12-0_ACT_SOCLIPC_ERIC-HLR_R12-0_ACT_SOCOLPC_ERIC-HLR_R12-0_ACT_TINC_ERIC-HLR_R12-0_ACT_TS11C_ERIC-HLR_R12-0_ACT_TS21C_ERIC-HLR_R12-0_ACT_TS22C_ERIC-HLR_R12-0_ACT_TS61C_ERIC-HLR_R12-0_ACT_TS62C_ERIC-HLR_R12-0_ACT_TSMOC_ERIC-HLR_R12-0_ADD_AMSISDNC_ERIC-HLR_R12-0_ADD_APNC_ERIC-HLR_R12-0_ADD_BAIC

Page 473: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

CSDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 459

C_ERIC-HLR_R12-0_ADD_BAOCC_ERIC-HLR_R12-0_ADD_BICROC_ERIC-HLR_R12-0_ADD_BOICC_ERIC-HLR_R12-0_ADD_BOIEXHC_ERIC-HLR_R12-0_ADD_CAMELC_ERIC-HLR_R12-0_ADD_CAWC_ERIC-HLR_R12-0_ADD_CFBC_ERIC-HLR_R12-0_ADD_CFNRCC_ERIC-HLR_R12-0_ADD_CFNRYC_ERIC-HLR_R12-0_ADD_CFSC_ERIC-HLR_R12-0_ADD_CFUC_ERIC-HLR_R12-0_ADD_CUGC_ERIC-HLR_R12-0_ADD_DCFC_ERIC-HLR_R12-0_ADD_FEATURESC_ERIC-HLR_R12-0_ADD_GMLCC_ERIC-HLR_R12-0_ADD_GPRSC_ERIC-HLR_R12-0_ADD_LOC-SERVICESC_ERIC-HLR_R12-0_ADD_SMS-SPAM-DATAC_ERIC-HLR_R12-0_ADD_SPNC_ERIC-HLR_R12-0_CREATE_MULTIPLE-SUBSCRIPTIONC_ERIC-HLR_R12-0_CREATE_SUBSCRIPTIONC_ERIC-HLR_R12-0_DEACT_BAICC_ERIC-HLR_R12-0_DEACT_BAOCC_ERIC-HLR_R12-0_DEACT_BICROC_ERIC-HLR_R12-0_DEACT_BOICC_ERIC-HLR_R12-0_DEACT_BOIEXHC_ERIC-HLR_R12-0_DEACT_BS21C_ERIC-HLR_R12-0_DEACT_BS22C_ERIC-HLR_R12-0_DEACT_BS23C_ERIC-HLR_R12-0_DEACT_BS24C_ERIC-HLR_R12-0_DEACT_BS25C_ERIC-HLR_R12-0_DEACT_BS26C_ERIC-HLR_R12-0_DEACT_BS2GC_ERIC-HLR_R12-0_DEACT_BS31C_ERIC-HLR_R12-0_DEACT_BS32C_ERIC-HLR_R12-0_DEACT_BS33

Page 474: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 4: Service Definition

460 Oracle Corporation

C_ERIC-HLR_R12-0_DEACT_BS34C_ERIC-HLR_R12-0_DEACT_BS3GC_ERIC-HLR_R12-0_DEACT_CAWC_ERIC-HLR_R12-0_DEACT_CFBC_ERIC-HLR_R12-0_DEACT_CFNRCC_ERIC-HLR_R12-0_DEACT_CFNRYC_ERIC-HLR_R12-0_DEACT_CFUC_ERIC-HLR_R12-0_DEACT_CLIPC_ERIC-HLR_R12-0_DEACT_CLIRC_ERIC-HLR_R12-0_DEACT_COLPC_ERIC-HLR_R12-0_DEACT_COLRC_ERIC-HLR_R12-0_DEACT_EMLPPC_ERIC-HLR_R12-0_DEACT_HOLDC_ERIC-HLR_R12-0_DEACT_ICIC_ERIC-HLR_R12-0_DEACT_MPTYC_ERIC-HLR_R12-0_DEACT_OBAC_ERIC-HLR_R12-0_DEACT_OBOPREC_ERIC-HLR_R12-0_DEACT_OBOPRIC_ERIC-HLR_R12-0_DEACT_OBSSMC_ERIC-HLR_R12-0_DEACT_OBZIC_ERIC-HLR_R12-0_DEACT_OINC_ERIC-HLR_R12-0_DEACT_OSB1C_ERIC-HLR_R12-0_DEACT_OSB2C_ERIC-HLR_R12-0_DEACT_OSB3C_ERIC-HLR_R12-0_DEACT_OSB4C_ERIC-HLR_R12-0_DEACT_PAIC_ERIC-HLR_R12-0_DEACT_SOCFRCC_ERIC-HLR_R12-0_DEACT_SOCFUC_ERIC-HLR_R12-0_DEACT_SOCLIPC_ERIC-HLR_R12-0_DEACT_SOCOLPC_ERIC-HLR_R12-0_DEACT_TINC_ERIC-HLR_R12-0_DEACT_TS11C_ERIC-HLR_R12-0_DEACT_TS21C_ERIC-HLR_R12-0_DEACT_TS22C_ERIC-HLR_R12-0_DEACT_TS61C_ERIC-HLR_R12-0_DEACT_TS62

Page 475: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

CSDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 461

C_ERIC-HLR_R12-0_DEACT_TSMOC_ERIC-HLR_R12-0_DELETE_MULTIPLE-SUBSCRIPTIONC_ERIC-HLR_R12-0_DELETE_SUBSCRIPTIONC_ERIC-HLR_R12-0_GET_CAMELC_ERIC-HLR_R12-0_GET_PDPC_ERIC-HLR_R12-0_GET_SERVICE-ADDRESSESC_ERIC-HLR_R12-0_GET_SUBSCRIBERC_ERIC-HLR_R12-0_GET_SUBSCRIPTIONC_ERIC-HLR_R12-0_MODIFY_IMSIC_ERIC-HLR_R12-0_MODIFY_IMSI-CANCELC_ERIC-HLR_R12-0_MODIFY_IMSI-CHANGEOVERC_ERIC-HLR_R12-0_MODIFY_IMSI-DEL-DATAC_ERIC-HLR_R12-0_MODIFY_MULTIPLE-SUBSCRIPTIONC_ERIC-HLR_R12-0_MODIFY_LOC-SERVICESC_ERIC-HLR_R12-0_MODIFY_SUBSCRIPTIONC_ERIC-HLR_R12-0_MOD_ACCC_ERIC-HLR_R12-0_MOD_AOCC_ERIC-HLR_R12-0_MOD_BS2FC_ERIC-HLR_R12-0_MOD_BS3FC_ERIC-HLR_R12-0_MOD_CAMELC_ERIC-HLR_R12-0_MOD_CAMEL-EXTENDEDC_ERIC-HLR_R12-0_MOD_CAPLC_ERIC-HLR_R12-0_MOD_CATC_ERIC-HLR_R12-0_MOD_DBSGC_ERIC-HLR_R12-0_MOD_DEMLPPC_ERIC-HLR_R12-0_MOD_FEATURESC_ERIC-HLR_R12-0_MOD_GPRSC_ERIC-HLR_R12-0_MOD_HPNC_ERIC-HLR_R12-0_MOD_MEMLPPC_ERIC-HLR_R12-0_MOD_NAMC_ERIC-HLR_R12-0_MOD_OBIC_ERIC-HLR_R12-0_MOD_OBOC_ERIC-HLR_R12-0_MOD_OBRC_ERIC-HLR_R12-0_MOD_OBRFC_ERIC-HLR_R12-0_MOD_OBZOC_ERIC-HLR_R12-0_MOD_OFA

Page 476: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 4: Service Definition

462 Oracle Corporation

C_ERIC-HLR_R12-0_MOD_OICKC_ERIC-HLR_R12-0_MOD_PICIC_ERIC-HLR_R12-0_MOD_PWDC_ERIC-HLR_R12-0_MOD_REGSERC_ERIC-HLR_R12-0_MOD_SCHARC_ERIC-HLR_R12-0_MOD_SOCBC_ERIC-HLR_R12-0_MOD_SOCFBC_ERIC-HLR_R12-0_MOD_SOCFRYC_ERIC-HLR_R12-0_MOD_SOCLIRC_ERIC-HLR_R12-0_MOD_SODCFC_ERIC-HLR_R12-0_MOD_SOSDCFC_ERIC-HLR_R12-0_MOD_STYPEC_ERIC-HLR_R12-0_MOD_TICKC_ERIC-HLR_R12-0_REM_AMSISDNC_ERIC-HLR_R12-0_REM_APNC_ERIC-HLR_R12-0_REM_BAICC_ERIC-HLR_R12-0_REM_BAOCC_ERIC-HLR_R12-0_REM_BICROC_ERIC-HLR_R12-0_REM_BOICC_ERIC-HLR_R12-0_REM_BOIEXHC_ERIC-HLR_R12-0_REM_CAMELC_ERIC-HLR_R12-0_REM_CAWC_ERIC-HLR_R12-0_REM_CFBC_ERIC-HLR_R12-0_REM_CFNRCC_ERIC-HLR_R12-0_REM_CFNRYC_ERIC-HLR_R12-0_REM_CFSC_ERIC-HLR_R12-0_REM_CFUC_ERIC-HLR_R12-0_REM_CUGC_ERIC-HLR_R12-0_REM_DCFC_ERIC-HLR_R12-0_REM_FEATURESC_ERIC-HLR_R12-0_REM_GMLCC_ERIC-HLR_R12-0_REM_GPRSC_ERIC-HLR_R12-0_REM_LOC-SERVICESC_ERIC-HLR_R12-0_REM_SPNC_ERIC-HLR_R12-0_REM_SMS-SPAM-DATAC_ERIC-HLR_R12-0_RESET_LOCATION

Page 477: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

CSDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 463

C_ERIC-HLR_R12-0_ACT_BAICActivates the barring of all incoming calls feature.

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_ACT_BAOCActivates the barring of all outgoing calls feature.

Table 258: C_ERIC-HLR_R12-0_ACT_BAIC

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 259: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_ACT_BAIC A_ERIC-HLR_R12-0_ACT_BAIC

Table 260: C_ERIC-HLR_R12-0_ACT_BAOC

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 478: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 4: Service Definition

464 Oracle Corporation

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_ACT_BICROActivates the barring of all incoming calls when roaming outside the home PLMN country.

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

Table 261: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_ACT_BAOC A_ERIC-HLR_R12-0_ACT_BAOC

Table 262: C_ERIC-HLR_R12-0_ACT_BICRO

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 263: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_ACT_BICRO A_ERIC-HLR_R12-0_ACT_BICRO

Page 479: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

CSDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 465

C_ERIC-HLR_R12-0_ACT_BOICActivates the barring of all outgoing international calls feature.

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_ACT_BOIEXHActivates the barring of all outgoing international calls except those directed to the home PLMN country feature.

Table 264: C_ERIC-HLR_R12-0_ACT_BOIC

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 265: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_ACT_BOIC A_ERIC-HLR_R12-0_ACT_BOIC

Table 266: C_ERIC-HLR_R12-0_ACT_BOIEXH

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

Page 480: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 4: Service Definition

466 Oracle Corporation

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_ACT_BS21Activates the datacircuit asynchronous 300 baud feature.

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 267: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_ACT_BOIEXH A_ERIC-HLR_R12-0_ACT_BOIEXH

Table 268: C_ERIC-HLR_R12-0_ACT_BS21

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 266: C_ERIC-HLR_R12-0_ACT_BOIEXH

Parameter Name Description RangeDefault Value

Type Class

Page 481: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

CSDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 467

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_ACT_BS22Activates the datacircuit asynchronous 1200 baud feature.

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

Table 269: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_ACT_BS21 A_ERIC-HLR_R12-0_ACT_BS21

Table 270: C_ERIC-HLR_R12-0_ACT_BS22

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 271: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_ACT_BS22 A_ERIC-HLR_R12-0_ACT_BS22

Page 482: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 4: Service Definition

468 Oracle Corporation

C_ERIC-HLR_R12-0_ACT_BS23Activates the datacircuit asynchronous 1200-75 baud feature.

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_ACT_BS24Activates the datacircuit asynchronous 2400 baud feature.

Table 272: C_ERIC-HLR_R12-0_ACT_BS23

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 273: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_ACT_BS23 A_ERIC-HLR_R12-0_ACT_BS23

Table 274: C_ERIC-HLR_R12-0_ACT_BS24

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 483: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

CSDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 469

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_ACT_BS25Activatedatacircuit asynchronous 4800 baud feature.

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

Table 275: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_ACT_BS24 A_ERIC-HLR_R12-0_ACT_BS24

Table 276: C_ERIC-HLR_R12-0_ACT_BS25

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 277: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_ACT_BS25 A_ERIC-HLR_R12-0_ACT_BS25

Page 484: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 4: Service Definition

470 Oracle Corporation

C_ERIC-HLR_R12-0_ACT_BS26Activates the datacircuit asynchronous 9600 baud feature.

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_ACT_BS2GActivates the general asynchronous bearer service feature.

Table 278: C_ERIC-HLR_R12-0_ACT_BS26

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 279: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_ACT_BS26 A_ERIC-HLR_R12-0_ACT_BS26

Table 280: C_ERIC-HLR_R12-0_ACT_BS2G

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 485: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

CSDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 471

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_ACT_BS31Activates the datacircuit synchronous 1200 baud feature.

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

Table 281: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_ACT_BS2G A_ERIC-HLR_R12-0_ACT_BS2G

Table 282: C_ERIC-HLR_R12-0_ACT_BS31

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 283: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_ACT_BS31 A_ERIC-HLR_R12-0_ACT_BS31

Page 486: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 4: Service Definition

472 Oracle Corporation

C_ERIC-HLR_R12-0_ACT_BS32Activates the datacircuit synchronous 2400 baud feature.

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_ACT_BS33Activates the datacircuit synchronous 4800 baud feature.

Table 284: C_ERIC-HLR_R12-0_ACT_BS32

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 285: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_ACT_BS32 A_ERIC-HLR_R12-0_ACT_BS32

Table 286: C_ERIC-HLR_R12-0_ACT_BS33

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 487: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

CSDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 473

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_ACT_BS34Activates the datacircuit synchronous 9600 baud feature.

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

Table 287: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_ACT_BS33 A_ERIC-HLR_R12-0_ACT_BS33

Table 288: C_ERIC-HLR_R12-0_ACT_BS34

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 289: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_ACT_BS34 A_ERIC-HLR_R12-0_ACT_BS34

Page 488: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 4: Service Definition

474 Oracle Corporation

C_ERIC-HLR_R12-0_ACT_BS3GActivates the general synchronous bearer service feature.

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_ACT_CAWActivates the call waiting feature.

Table 290: C_ERIC-HLR_R12-0_ACT_BS3G

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 291: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_ACT_BS3G A_ERIC-HLR_R12-0_ACT_BS3G

Table 292: C_ERIC-HLR_R12-0_ACT_CAW

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 489: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

CSDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 475

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_ACT_CFBActivates the call forwarding on mobile subscriber busy feature.

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

Table 293: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_ACT_CAW A_ERIC-HLR_R12-0_ACT_CAW

Table 294: C_ERIC-HLR_R12-0_ACT_CFB

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 295: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_ACT_CFB A_ERIC-HLR_R12-0_ACT_CFB

Page 490: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 4: Service Definition

476 Oracle Corporation

C_ERIC-HLR_R12-0_ACT_CFNRCActivates the call forwarding on mobile subscriber not reachable feature.

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_ACT_CFNRYActivates the call forwarding on no reply feature.

Table 296: C_ERIC-HLR_R12-0_ACT_CFNRC

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 297: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_ACT_CFNRC A_ERIC-HLR_R12-0_ACT_CFNRC

Table 298: C_ERIC-HLR_R12-0_ACT_CFNRY

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 491: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

CSDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 477

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_ACT_CFUActivates the call forwarding unconditional feature.

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

Table 299: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_ACT_CFNRY A_ERIC-HLR_R12-0_ACT_CFNRY

Table 300: C_ERIC-HLR_R12-0_ACT_CFU

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 301: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_ACT_CFU A_ERIC-HLR_R12-0_ACT_CFU

Page 492: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 4: Service Definition

478 Oracle Corporation

C_ERIC-HLR_R12-0_ACT_CLIPActivates the calling line identification presentation feature.

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_ACT_CLIRActivates the calling line identification restriction feature.

Table 302: C_ERIC-HLR_R12-0_ACT_CLIP

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 303: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_ACT_CLIP A_ERIC-HLR_R12-0_ACT_CLIP

Table 304: C_ERIC-HLR_R12-0_ACT_CLIR

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 493: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

CSDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 479

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_ACT_COLPActivates the connected line identification presentation feature.

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

Table 305: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_ACT_CLIR A_ERIC-HLR_R12-0_ACT_CLIR

Table 306: C_ERIC-HLR_R12-0_ACT_COLP

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 307: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_ACT_COLP A_ERIC-HLR_R12-0_ACT_COLP

Page 494: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 4: Service Definition

480 Oracle Corporation

C_ERIC-HLR_R12-0_ACT_COLRActivates the connected line identification restriction feature.

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_ACT_EMLPPActivates the enhanced multi-level precedence and pre-emption feature.

Table 308: C_ERIC-HLR_R12-0_ACT_COLR

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 309: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_ACT_COLR A_ERIC-HLR_R12-0_ACT_COLR

Table 310: C_ERIC-HLR_R12-0_ACT_EMLPP

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 495: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

CSDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 481

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_ACT_HOLDAdds the call hold feature.

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

Table 311: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_ACT_EMLPP A_ERIC-HLR_R12-0_ACT_EMLPP

Table 312: C_ERIC-HLR_R12-0_ACT_HOLD

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 313: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_ACT_HOLD A_ERIC-HLR_R12-0_ACT_HOLD

Page 496: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 4: Service Definition

482 Oracle Corporation

C_ERIC-HLR_R12-0_ACT_ICIActivates the immediate call itemization feature.

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_ACT_MPTYActivates the multi party service feature.

Table 314: C_ERIC-HLR_R12-0_ACT_ICI

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 315: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_ACT_ICI A_ERIC-HLR_R12-0_ACT_ICI

Table 316: C_ERIC-HLR_R12-0_ACT_MPTY

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 497: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

CSDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 483

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_ACT_OBAActivates the operator determined barring of all incoming and outgoing calls.

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

Table 317: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_ACT_MPTY A_ERIC-HLR_R12-0_ACT_MPTY

Table 318: C_ERIC-HLR_R12-0_ACT_OBA

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 319: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_ACT_OBA A_ERIC-HLR_R12-0_ACT_OBA

Page 498: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 4: Service Definition

484 Oracle Corporation

C_ERIC-HLR_R12-0_ACT_OBOPREActivates the operator determined barring of outgoing premium rate calls (Entertainment) feature.

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_ACT_OBOPRIActivates the operator determined barring of outgoing premium rate calls (Information) feature.

Table 320: C_ERIC-HLR_R12-0_ACT_OBOPRE

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 321: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_ACT_OBOPRE A_ERIC-HLR_R12-0_ACT_OBOPRE

Table 322: C_ERIC-HLR_R12-0_ACT_OBOPRI

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

Page 499: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

CSDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 485

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_ACT_OBSSMActivates the operator determined barring of supplementary service management feature.

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 323: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_ACT_OBOPRI A_ERIC-HLR_R12-0_ACT_OBOPRI

Table 324: C_ERIC-HLR_R12-0_ACT_OBSSM

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 322: C_ERIC-HLR_R12-0_ACT_OBOPRI

Parameter Name Description RangeDefault Value

Type Class

Page 500: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 4: Service Definition

486 Oracle Corporation

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_ACT_OBZIActivates the operator determined barring of incoming inter-zonal calls feature.

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

Table 325: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_ACT_OBSSM A_ERIC-HLR_R12-0_ACT_OBSSM

Table 326: C_ERIC-HLR_R12-0_ACT_OBZI

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 327: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_ACT_OBZI A_ERIC-HLR_R12-0_ACT_OBZI

Page 501: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

CSDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 487

C_ERIC-HLR_R12-0_ACT_OINActivates the originating intelligent network feature.

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_ACT_OSB1Activates the operator determined barring of specific barring in HPLMN (Type1) feature.

Table 328: C_ERIC-HLR_R12-0_ACT_OIN

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 329: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_ACT_OIN A_ERIC-HLR_R12-0_ACT_OIN

Table 330: C_ERIC-HLR_R12-0_ACT_OSB1

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 502: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 4: Service Definition

488 Oracle Corporation

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_ACT_OSB2Activates the operator determined barring of specific barring in HPLMN (Type 2) feature.

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

Table 331: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_ACT_OSB1 A_ERIC-HLR_R12-0_ACT_OSB1

Table 332: C_ERIC-HLR_R12-0_ACT_OSB2

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 333: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_ACT_OSB2 A_ERIC-HLR_R12-0_ACT_OSB2

Page 503: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

CSDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 489

C_ERIC-HLR_R12-0_ACT_OSB3Activates the operator determined barring of specific barring in HPLMN (Type 3) feature.

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_ACT_OSB4Activates the operator determined barring of specific barring in HPLMN (Type 4) feature.

Table 334: C_ERIC-HLR_R12-0_ACT_OSB3

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 335: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_ACT_OSB3 A_ERIC-HLR_R12-0_ACT_OSB3

Table 336: C_ERIC-HLR_R12-0_ACT_OSB4

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 504: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 4: Service Definition

490 Oracle Corporation

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_ACT_PAIActivates the positioning allowed indicator feature.

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

Table 337: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_ACT_OSB4 A_ERIC-HLR_R12-0_ACT_OSB4

Table 338: C_ERIC-HLR_R12-0_ACT_PAI

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 339: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_ACT_PAI A_ERIC-HLR_R12-0_ACT_PAI

Page 505: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

CSDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 491

C_ERIC-HLR_R12-0_ACT_SOCFRCActivates the subscription option call forwarding on mobile subscriber not reachable feature.

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_ACT_SOCFUActivates the subscription option call forwarding unconditional feature.

Table 340: C_ERIC-HLR_R12-0_ACT_SOCFRC

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 341: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_ACT_SOCFRC A_ERIC-HLR_R12-0_ACT_SOCFRC

Table 342: C_ERIC-HLR_R12-0_ACT_SOCFU

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 506: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 4: Service Definition

492 Oracle Corporation

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_ACT_SOCLIPActivates the subscription option calling line identification presentation feature.

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_ACT_SOCOLPActivates the subscription option connected line identification presentation feature.

Table 343: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_ACT_SOCFU A_ERIC-HLR_R12-0_ACT_SOCFU

Table 344: C_ERIC-HLR_R12-0_ACT_SOCLIP

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

Table 345: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_ACT_SOCLIP A_ERIC-HLR_R12-0_ACT_SOCLIP

Table 346: C_ERIC-HLR_R12-0_ACT_SOCOLP

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

Page 507: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

CSDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 493

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_ACT_TINActivates the terminating intelligent network feature.

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 347: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_ACT_SOCOLP A_ERIC-HLR_R12-0_ACT_SOCOLP

Table 348: C_ERIC-HLR_R12-0_ACT_TIN

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 346: C_ERIC-HLR_R12-0_ACT_SOCOLP

Parameter Name Description RangeDefault Value

Type Class

Page 508: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 4: Service Definition

494 Oracle Corporation

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_ACT_TS11Activates the telephony feature.

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_ACT_TS21Activates the short message MT/PP feature.

Table 349: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_ACT_TIN A_ERIC-HLR_R12-0_ACT_TIN

Table 350: C_ERIC-HLR_R12-0_ACT_TS11

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

Table 351: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_ACT_TS11 A_ERIC-HLR_R12-0_ACT_TS11

Table 352: C_ERIC-HLR_R12-0_ACT_TS21

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

Page 509: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

CSDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 495

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_ACT_TS22Activates the short message MO/PP feature.

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 353: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_ACT_TS21 A_ERIC-HLR_R12-0_ACT_TS21

Table 354: C_ERIC-HLR_R12-0_ACT_TS22

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 352: C_ERIC-HLR_R12-0_ACT_TS21

Parameter Name Description RangeDefault Value

Type Class

Page 510: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 4: Service Definition

496 Oracle Corporation

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_ACT_TS61Activates the alternate speech/fax group 3 transparent feature.

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

Table 355: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_ACT_TS22 A_ERIC-HLR_R12-0_ACT_TS22

Table 356: C_ERIC-HLR_R12-0_ACT_TS61

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 357: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_ACT_TS61 A_ERIC-HLR_R12-0_ACT_TS61

Page 511: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

CSDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 497

C_ERIC-HLR_R12-0_ACT_TS62Activates the automatic facsimile group 3 feature.

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_ACT_TSMOActivates the transfer of short message option feature.

Table 358: C_ERIC-HLR_R12-0_ACT_TS62

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 359: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_ACT_TS62 A_ERIC-HLR_R12-0_ACT_TS62

Table 360: C_ERIC-HLR_R12-0_ACT_TSMO

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 512: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 4: Service Definition

498 Oracle Corporation

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_ADD_AMSISDNAdds the additional MSISDN feature.

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

Table 361: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_ACT_TSMO A_ERIC-HLR_R12-0_ACT_TSMO

Table 362: C_ERIC-HLR_R12-0_ADD_AMSISDN

Parameter Name Description RangeDefault Value

Type Class

AMSISDN Additional MSISDN. S R

BC Bearer capability number.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 363: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_ADD_AMSISDN A_ERIC-HLR_R12-0_ADD_AMSISDN

Page 513: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

CSDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 499

C_ERIC-HLR_R12-0_ADD_APNAdds the access point name feature.

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_ADD_BAICAdds the barring of all incoming calls feature.

Table 364: C_ERIC-HLR_R12-0_ADD_APN

Parameter Name Description RangeDefault Value

Type Class

APN1 Access point name first part.

Text string 1 - 41 characters

S R

APN2 Access point name second part.

Text string 1 - 41 characters

S O

APNID Access point name identifier.

0 - 16383 S O

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 365: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_ADD_APN A_ERIC-HLR_R12-0_ADD_APN

Table 366: C_ERIC-HLR_R12-0_ADD_BAIC

Parameter Name Description RangeDefault Value

Type Class

BSG Basic service group. S O

Page 514: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 4: Service Definition

500 Oracle Corporation

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_ADD_BAOCAdds the barring of all outgoing calls feature.

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 367: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_ADD_BAIC A_ERIC-HLR_R12-0_ADD_BAIC

Table 368: C_ERIC-HLR_R12-0_ADD_BAOC

Parameter Name Description RangeDefault Value

Type Class

BSG Basic service group. S O

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 366: C_ERIC-HLR_R12-0_ADD_BAIC

Parameter Name Description RangeDefault Value

Type Class

Page 515: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

CSDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 501

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_ADD_BICROAdds the barring of all incoming calls when roaming outside the home PLMN country feature.

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

Table 369: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_ADD_BAOC A_ERIC-HLR_R12-0_ADD_BAOC

Table 370: C_ERIC-HLR_R12-0_ADD_BICRO

Parameter Name Description RangeDefault Value

Type Class

BSG Basic service group. S O

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 371: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_ADD_BICRO A_ERIC-HLR_R12-0_ADD_BICRO

Page 516: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 4: Service Definition

502 Oracle Corporation

C_ERIC-HLR_R12-0_ADD_BOICAdds the barring of all outgoing international calls feature.

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_ADD_BOIEXHAdds the barring of all outgoing international calls except those directed to the home PLMN country feature.

Table 372: C_ERIC-HLR_R12-0_ADD_BOIC

Parameter Name Description RangeDefault Value

Type Class

BSG Basic service group. S O

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 373: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_ADD_BOIC A_ERIC-HLR_R12-0_ADD_BOIC

Table 374: C_ERIC-HLR_R12-0_ADD_BOIEXH

Parameter Name Description RangeDefault Value

Type Class

BSG Basic service group. S O

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

Page 517: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

CSDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 503

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_ADD_CAMELAdds the camel services feature.

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 375: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_ADD_BOIEXH A_ERIC-HLR_R12-0_ADD_BOIEXH

Table 376: C_ERIC-HLR_R12-0_ADD_CAMEL

Parameter Name Description RangeDefault Value

Type Class

CAMEL_CAPABILITY_HANDLING

CAMEL capability handling.

Range is 1,2 ,3 or 4.(1-CAMEL phase 1;2-CAMEL phase 2;3-CAMEL phase 3;4-CAMEL phase 4;)

S O

CAMEL_SUBSCRIPTION_PROFILE

CAMEL subscription profile.

1 - 255 S O

Table 374: C_ERIC-HLR_R12-0_ADD_BOIEXH

Parameter Name Description RangeDefault Value

Type Class

Page 518: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 4: Service Definition

504 Oracle Corporation

DEFAULT_ERROR_HANDLING

Default error handling. 0 - Call released in case of errror in GSM service control function to GSM or GPRS1 - Call continued in case of errror in GSM service control function to GSM or GPRS

S O

DIALLED_NUMBER Dialled number. 1.Format is na-dial where na is nature of address (0 to 4 Ex:na-Nature of address indicator;0-Unknown;1-Not used;2-Not used;3-National number;4-International number) 2.dial Dialled number series Text string 1 - 15 characters. 3.Only digits 0-9, *, #, a, b and c are allowed as characters.

S O

DS_CAMEL_TRIGGER_DETECTION_POINT

Dialled service CAMEL subscription data trigger detection point.

1 - 10 S O

GPRS_TRIGGER_DETECTION_POINT

GPRS CAMEL trigger detection point.

Valid values are 1,2,11,12,14. (1-Attach,2-Change of position GPRS session,11-Packet Data Protocol (PDP) context establishment,12-PDP context establishment acknowledgment,14-Change of position context)

S O

Table 376: C_ERIC-HLR_R12-0_ADD_CAMEL

Parameter Name Description RangeDefault Value

Type Class

Page 519: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

CSDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 505

GSM_SERVICE_ADDRESS

GSM service control function address.

Defined as international E.164 number.

Defined as internation E.164 number. Range is digit string 3-15 digits.

S R

INHIBITION_INDICATOR

Inhibitor indicator. Y - Terminating trigger detection point will not be sent to the GMS Switch CenterN -Terminating trigger detection point will always be sent to the GMS Switch Center.

S O

MM_CAMEL_TRIGGER_DETECTION_POINT

Mobility management CAMEL subscription data trigger detection point.

Valid values are from 0 to 4.(0-Location update in the same Visitor Location Register (VLR) service area;1-Location update to another VLR service area;2-International Mobile Subscriber Identity (IMSI) attach;3-Mobile Station (MS) initiated IMSI detach (explicit detach);4-Network initiated IMSI detach (implicit detach))

S O

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S O

NE_ID_ERIC-HLR Remote network element name.

S R

ORIG_CAMEL_TRIGGER_DETECTION_POINT

Originating CAMEL subscription data trigger detection point.

Valid values are 2,4.(2-Collected info,4-Route select failure).

S O

Table 376: C_ERIC-HLR_R12-0_ADD_CAMEL

Parameter Name Description RangeDefault Value

Type Class

Page 520: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 4: Service Definition

506 Oracle Corporation

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

ORIG_SMS_TRIGGER_DETECTION_POINT

Originating SMS trigger detection point.

Valid value is 1.(1-SMS collected info).

S O

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

SERVICE_KEY Service key. 0 - 2147483647 S R

TERM_CAMEL_TRIGGER_DETECTION_POINT

Terminating CAMEL subscription data trigger detection point.

Valid values are 12,13,14.(12-Terminating attempt authorized,13-Terminator busy,14-Terminator no answer).

S O

TERM_SMS_CAMEL_TRIGGER_DETECTION_POINT

Terminating SMS CAMEL subscription data trigger detection point.

Valid value is 2 and ALL.(2-SMS Delivery Request,ALL-All terminating SMS CAMEL TDPs).

S O

VMSC_TERM_TRIGGER_DETECTION_POINT

Visited mobile switching centre terminating trigger detection point.

Valid values are 12,13,14 and ALL.(12-Terminating attempt authorized,13-Terminator busy,14-Terminator no answer,ALL-All VMSC terminating CAMEL TDPs).

S O

Table 377: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_ADD_CAMEL A_ERIC-HLR_R12-0_ADD_CAMEL

Table 376: C_ERIC-HLR_R12-0_ADD_CAMEL

Parameter Name Description RangeDefault Value

Type Class

Page 521: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

CSDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 507

C_ERIC-HLR_R12-0_ADD_CAWAdds the call waiting feature.

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_ADD_CFBAdds the call forwarding on mobile subscriber busy feature.

Table 378: C_ERIC-HLR_R12-0_ADD_CAW

Parameter Name Description RangeDefault Value

Type Class

BSG Basic service group. S O

FNUM Call forwarding number.

S O

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 379: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_ADD_CAW A_ERIC-HLR_R12-0_ADD_CAW

Table 380: C_ERIC-HLR_R12-0_ADD_CFB

Parameter Name Description RangeDefault Value

Type Class

BSG Basic service group. S O

FNUM Call forwarding number.

S R

Page 522: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 4: Service Definition

508 Oracle Corporation

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

OFA Origin for forwarded-to number analysis.

0 - 512 S O

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

SADD Forwarded-to subaddress information.

Format: typesadd -subadd.

typesadd values maybe 0,1,2subadd maybe 2 to 40 characters

S O

TIME No reply timer in seconds.

5 to 30 in steps of 5 S O

Table 381: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_ADD_CFB A_ERIC-HLR_R12-0_ADD_CFB

Table 380: C_ERIC-HLR_R12-0_ADD_CFB

Parameter Name Description RangeDefault Value

Type Class

Page 523: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

CSDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 509

C_ERIC-HLR_R12-0_ADD_CFNRCAdds the call forwarding on mobile subscriber not reachable feature.

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

Table 382: C_ERIC-HLR_R12-0_ADD_CFNRC

Parameter Name Description RangeDefault Value

Type Class

BSG Basic service group. S O

FNUM Call forwarding number.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

OFA Origin for forwarded-to number analysis.

0 - 512 S O

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

SADD Forwarded-to subaddress information.

Format: typesadd -subadd.

typesadd values maybe 0,1,2subadd maybe 2 to 40 characters

S O

Table 383: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_ADD_CFNRC A_ERIC-HLR_R12-0_ADD_CFNRC

Page 524: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 4: Service Definition

510 Oracle Corporation

C_ERIC-HLR_R12-0_ADD_CFNRYAdds the call forwarding on no reply feature.

Table 384: C_ERIC-HLR_R12-0_ADD_CFNRY

Parameter Name Description RangeDefault Value

Type Class

BSG Basic service group. S O

FNUM Call forwarding number.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

OFA Origin for forwarded-to number analysis.

0 - 512 S O

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

SADD Forwarded-to subaddress information.

Format: typesadd -subadd.

typesadd values maybe 0,1,2subadd maybe 2 to 40 characters

S O

TIME No reply timer in seconds.

5 to 30 in steps of 5 S O

Page 525: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

CSDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 511

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_ADD_CFSAdds the call forwarding services feature.

Table 385: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_ADD_CFNRY A_ERIC-HLR_R12-0_ADD_CFNRY

Table 386: C_ERIC-HLR_R12-0_ADD_CFS

Parameter Name Description RangeDefault Value

Type Class

BSG Basic service group. S O

FNUM Call forwarding number.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

OFA Origin for forwarded-to number analysis.

0 - 512 S O

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

SADD Forwarded-to subaddress information.

Format: typesadd -subadd.

typesadd values maybe 0,1,2subadd maybe 2 to 40 characters

S O

Page 526: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 4: Service Definition

512 Oracle Corporation

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_ADD_CFUAdds the call forwarding unconditional feature.

TIME No reply timer in seconds.

5 to 30 in steps of 5 S O

Table 387: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_ADD_CFS A_ERIC-HLR_R12-0_ADD_CFS

Table 388: C_ERIC-HLR_R12-0_ADD_CFU

Parameter Name Description RangeDefault Value

Type Class

BSG Basic service group. S O

FNUM Call forwarding number.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

OFA Origin for forwarded-to number analysis.

0 - 512 S O

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 386: C_ERIC-HLR_R12-0_ADD_CFS

Parameter Name Description RangeDefault Value

Type Class

Page 527: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

CSDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 513

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_ADD_CUGAdds the mobile subscriber to a closed user group feature.

Table 389: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_ADD_CFU A_ERIC-HLR_R12-0_ADD_CFU

Table 390: C_ERIC-HLR_R12-0_ADD_CUG

Parameter Name Description RangeDefault Value

Type Class

BSG Basic service group identifier.

The basic service groups may also be specified as a list.

Example: TS10, TS60

S O

INDEX Closed user group index.

0 - 32767 S R

INTERLOCK_CODE Closed user group interlock code.

Expressed as [ni-] cugcode.

where ni is network identity (000-999 range) and cugcode is closed user group code (0 to 65535).

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

Page 528: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 4: Service Definition

514 Oracle Corporation

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_ADD_DCFAdds the default call forwarding.

RESTRICTION CUG Restrictions. ICB - Incoming calls barred within closed user groupOCB - Outgoing calls barred within closed user groupNONE - No restrictions within closed user group.

S O

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 391: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_ADD_CUG A_ERIC-HLR_R12-0_ADD_CUG

Table 392: C_ERIC-HLR_R12-0_ADD_DCF

Parameter Name Description RangeDefault Value

Type Class

BSG Basic service group. S O

FNUM Call forwarding number.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

Table 390: C_ERIC-HLR_R12-0_ADD_CUG

Parameter Name Description RangeDefault Value

Type Class

Page 529: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

CSDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 515

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

NE_ID_ERIC-HLR Remote network element name.

S R

OFA Origin for forwarded-to number analysis.

0 - 512 S O

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

TIME No reply timer in seconds.

Ranges from 5 to 30 in steps of 5.

S O

Table 393: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_ADD_DCF A_ERIC-HLR_R12-0_ADD_DCF

Table 392: C_ERIC-HLR_R12-0_ADD_DCF

Parameter Name Description RangeDefault Value

Type Class

Page 530: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 4: Service Definition

516 Oracle Corporation

C_ERIC-HLR_R12-0_ADD_FEATURESAdds the multiple features with optimized MMLs.

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

Table 394: C_ERIC-HLR_R12-0_ADD_FEATURES

Parameter Name Description RangeDefault Value

Type Class

FEATURES Multiple features to be added using MML optimization.

Consists of:

FEATURES[i].MSISDNFEATURES[i].SUB_CODEFEATURES[i].BSGFEATURES[i].FNUMFEATURES[i].OFAFEATURES[i].TIMEFEATURES[i].SADDwhere i is any number

C R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 395: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_ADD_FEATURES A_ERIC-HLR_R12-0_ADD_FEATURES

Page 531: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

CSDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 517

C_ERIC-HLR_R12-0_ADD_GMLCAdds the GMLC address feature.

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_ADD_GPRSAdds the GPRS services feature.

Table 396: C_ERIC-HLR_R12-0_ADD_GMLC

Parameter Name Description RangeDefault Value

Type Class

GMLCID GMLC identifier. Upto 5 GMLC ids can be specified.

They can be comma separated.

Example: 0, 255, 13

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 397: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_ADD_GMLC A_ERIC-HLR_R12-0_ADD_GMLC

Table 398: C_ERIC-HLR_R12-0_ADD_GPRS

Parameter Name Description RangeDefault Value

Type Class

APNID Access point name identifier.

0 - 16383 C N

Page 532: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 4: Service Definition

518 Oracle Corporation

EQOSID Extended quality of service identifier.

0 - 4095 C R

IMSI International mobile subscriber identity.

S O

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S O

NE_ID_ERIC-HLR Remote network element name.

S R

PDPADD Packet data protocol address.

This value is specified as an IP address.

Example: oc1.oc2.oc3.oc4

where oc is an octet in the range of 0 to 255.

C N

PDPID PDP context identifier. 1 - 10 C N

PDP_CONTEXT_CHARGING

Packet data protocol context charging characteristics.

1 - 15 C N

PDP_TYPE Packet data protocol context type.

IPV4 - IP version 4 PPP - Point to point protocol

C N

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

VPLMN_ADDRESS_ALLOWED

Visited public land mobile address allowed.

Y/N C N

Table 398: C_ERIC-HLR_R12-0_ADD_GPRS

Parameter Name Description RangeDefault Value

Type Class

Page 533: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

CSDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 519

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_ADD_LOC-SERVICESAdds the location services feature.

Table 399: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_ADD_GPRS A_ERIC-HLR_R12-0_ADD_GPRS

A_ERIC-HLR_R12-0_GET_PDPID

Table 400: C_ERIC-HLR_R12-0_ADD_LOC-SERVICES

Parameter Name Description RangeDefault Value

Type Class

CREL Call related location services privacy class.

Only valid values are YES or NO

S O

CUNRL Call unrelated location services privacy class.

Only valid values are YES or NO

S O

EADD External location services client address.

Defined as E.164 number.

3 - 15 digits S O

EADD_CREL Call related location services privacy class.

S O

EADD_CUNRL Call unrelated location services privacy class.

Only valid values are YES or NO

S O

GRES Restriction on the Gateway Mobile Location Center (GMLC).

0 - only GMLCs defined in subscriber GMLC address list1 - any GMLC in the home country

S O

Page 534: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 4: Service Definition

520 Oracle Corporation

INTID Internal identity list. 0 - 4

The list maybe comma separated.

Example: 0,1,3,4

S O

MOCL Location services mobile originating class list.

ASL - autonomous shelf locationBSL - basic shelf locationTTP - transfer to third party

The list can be comma separated.

Example: BSL, ASL

S O

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

NOTF Location request restriction related to the notification to the mobile subscriber.

0 - location request allowed without notification1 - location request with notification2 - location request with notification and privacy verification allowed3 - location request with notification and privacy verification restricted

S O

PLMNO PLMN operator location services privacy class.

Only valid values are YES or NO

S O

Table 400: C_ERIC-HLR_R12-0_ADD_LOC-SERVICES

Parameter Name Description RangeDefault Value

Type Class

Page 535: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

CSDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 521

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_ADD_SMS-SPAM-DATAActivate Short Message Service Centre address series.

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

SERVT Public Land Mobile Network (PLMN) operator LCS privacy class service type.

0 - 127 S O

UNIV Universal location services privacy class.

Only valid values are YES or NO

S O

Table 401: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_ADD_LOC-SERVICES A_ERIC-HLR_R12-0_ADD_LOC-SERVICES

Table 402: C_ERIC-HLR_R12-0_ADD_SMS-SPAM-DATA

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote Network Element Name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes.

S O

Table 400: C_ERIC-HLR_R12-0_ADD_LOC-SERVICES

Parameter Name Description RangeDefault Value

Type Class

Page 536: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 4: Service Definition

522 Oracle Corporation

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_ADD_SPNAdds the single personal number feature.

SCADDS Short Message Service Centre address series.

S R

Table 403: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_ADD_SMS-SPAM-DATA A_ERIC-HLR_R12-0_ADD_SMS-SPAM-DATA

Table 404: C_ERIC-HLR_R12-0_ADD_SPN

Parameter Name Description RangeDefault Value

Type Class

BSG Basic service group. S O

FNUM Call forwarding number.

S O

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

OFA Origin for forwarded-to number analysis.

0 - 512 S O

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 402: C_ERIC-HLR_R12-0_ADD_SMS-SPAM-DATA

Parameter Name Description RangeDefault Value

Type Class

Page 537: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

CSDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 523

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_CREATE_MULTIPLE-SUBSCRIPTIONCreate multiple subscription data.

SADD Forwarded-to subaddress information.

Format: typesadd -subadd.

typesadd values maybe 0,1,2 subadd maybe 2 to 40 characters

S O

TIME No reply timer in seconds.

5 to 30 in steps of 5 S O

Table 405: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_ADD_SPN A_ERIC-HLR_R12-0_ADD_SPN

Table 406: C_ERIC-HLR_R12-0_CREATE_MULTIPLE-SUBSCRIPTION

Parameter Name Description RangeDefault Value

Type Class

IMSI International Mobile Subscriber Identity.

S R

MCH Multiple subscription activation mechanism.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

Table 404: C_ERIC-HLR_R12-0_ADD_SPN

Parameter Name Description RangeDefault Value

Type Class

Page 538: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 4: Service Definition

524 Oracle Corporation

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_CREATE_SUBSCRIPTIONCreates the GSM HLR subscription feature.

NE_ID_ERIC-HLR Remote Network Element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes.

S O

Table 407: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_CREATE_MULTIPLE-SUBSCRIPTION

A_ERIC-HLR_R12-0_CREATE_MULTIPLE-SUBSCRIPTION

Table 408: C_ERIC-HLR_R12-0_CREATE_SUBSCRIPTION

Parameter Name Description RangeDefault Value

Type Class

IMSI IMSI. S R

LMU Location measurement unit.

Y/N S O

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

PROFILE Profile number. S O

Table 406: C_ERIC-HLR_R12-0_CREATE_MULTIPLE-SUBSCRIPTION

Parameter Name Description RangeDefault Value

Type Class

Page 539: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

CSDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 525

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_DEACT_BAICDeactivates the barring of all incoming calls feature.

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 409: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_CREATE_SUBSCRIPTION A_ERIC-HLR_R12-0_CREATE_SUBSCRIPTION

Table 410: C_ERIC-HLR_R12-0_DEACT_BAIC

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 408: C_ERIC-HLR_R12-0_CREATE_SUBSCRIPTION

Parameter Name Description RangeDefault Value

Type Class

Page 540: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 4: Service Definition

526 Oracle Corporation

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_DEACT_BAOCDeactivates the barring of all outgoing calls feature.

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

Table 411: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_DEACT_BAIC A_ERIC-HLR_R12-0_DEACT_BAIC

Table 412: C_ERIC-HLR_R12-0_DEACT_BAOC

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 413: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_DEACT_BAOC A_ERIC-HLR_R12-0_DEACT_BAOC

Page 541: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

CSDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 527

C_ERIC-HLR_R12-0_DEACT_BICRODeactivates the barring of all incoming calls when roaming outside the home PLMN country feature.

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_DEACT_BOICDeactivates the barring of all outgoing international calls feature.

Table 414: C_ERIC-HLR_R12-0_DEACT_BICRO

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 415: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_DEACT_BICRO A_ERIC-HLR_R12-0_DEACT_BICRO

Table 416: C_ERIC-HLR_R12-0_DEACT_BOIC

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

Page 542: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 4: Service Definition

528 Oracle Corporation

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_DEACT_BOIEXHDeactivates the barring of all outgoing international calls except those directed to the home PLMN country feature.

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 417: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_DEACT_BOIC A_ERIC-HLR_R12-0_DEACT_BOIC

Table 418: C_ERIC-HLR_R12-0_DEACT_BOIEXH

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 416: C_ERIC-HLR_R12-0_DEACT_BOIC

Parameter Name Description RangeDefault Value

Type Class

Page 543: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

CSDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 529

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_DEACT_BS21Deactivates the datacircuit asynchronous 300 baud feature.

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

Table 419: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_DEACT_BOIEXH A_ERIC-HLR_R12-0_DEACT_BOIEXH

Table 420: C_ERIC-HLR_R12-0_DEACT_BS21

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 421: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_DEACT_BS21 A_ERIC-HLR_R12-0_DEACT_BS21

Page 544: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 4: Service Definition

530 Oracle Corporation

C_ERIC-HLR_R12-0_DEACT_BS22Deactivates the datacircuit asynchronous 1200 baud feature.

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_DEACT_BS23Deactivates the datacircuit asynchronous 1200-75 baud feature.

Table 422: C_ERIC-HLR_R12-0_DEACT_BS22

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 423: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_DEACT_BS22 A_ERIC-HLR_R12-0_DEACT_BS22

Table 424: C_ERIC-HLR_R12-0_DEACT_BS23

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 545: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

CSDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 531

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_DEACT_BS24Deactivates the datacircuit asynchronous 2400 baud feature.

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

Table 425: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_DEACT_BS23 A_ERIC-HLR_R12-0_DEACT_BS23

Table 426: C_ERIC-HLR_R12-0_DEACT_BS24

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 427: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_DEACT_BS24 A_ERIC-HLR_R12-0_DEACT_BS24

Page 546: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 4: Service Definition

532 Oracle Corporation

C_ERIC-HLR_R12-0_DEACT_BS25Deactivates the datacircuit asynchronous 4800 baud feature.

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_DEACT_BS26Deactivates the datacircuit asynchronous 9600 baud feature.

Table 428: C_ERIC-HLR_R12-0_DEACT_BS25

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 429: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_DEACT_BS25 A_ERIC-HLR_R12-0_DEACT_BS25

Table 430: C_ERIC-HLR_R12-0_DEACT_BS26

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 547: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

CSDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 533

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_DEACT_BS2GDeactivates the general asynchronous bearer service feature.

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

Table 431: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_DEACT_BS26 A_ERIC-HLR_R12-0_DEACT_BS26

Table 432: C_ERIC-HLR_R12-0_DEACT_BS2G

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 433: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_DEACT_BS2G A_ERIC-HLR_R12-0_DEACT_BS2G

Page 548: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 4: Service Definition

534 Oracle Corporation

C_ERIC-HLR_R12-0_DEACT_BS31Deactivates the datacircuit synchronous 1200 baud feature.

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_DEACT_BS32Deactivates the datacircuit synchronous 2400 baud feature.

Table 434: C_ERIC-HLR_R12-0_DEACT_BS31

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 435: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_DEACT_BS31 A_ERIC-HLR_R12-0_DEACT_BS31

Table 436: C_ERIC-HLR_R12-0_DEACT_BS32

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 549: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

CSDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 535

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_DEACT_BS33Deactivates the datacircuit synchronous 4800 baud feature.

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

Table 437: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_DEACT_BS32 A_ERIC-HLR_R12-0_DEACT_BS32

Table 438: C_ERIC-HLR_R12-0_DEACT_BS33

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 439: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_DEACT_BS33 A_ERIC-HLR_R12-0_DEACT_BS33

Page 550: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 4: Service Definition

536 Oracle Corporation

C_ERIC-HLR_R12-0_DEACT_BS34Deactivates the datacircuit synchronous 9600 baud feature.

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_DEACT_BS3GDeactivates the general synchronous bearer service feature.

Table 440: C_ERIC-HLR_R12-0_DEACT_BS34

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 441: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_DEACT_BS34 A_ERIC-HLR_R12-0_DEACT_BS34

Table 442: C_ERIC-HLR_R12-0_DEACT_BS3G

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 551: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

CSDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 537

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_DEACT_CAWDeactivates the call waiting feature.

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

Table 443: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_DEACT_BS3G A_ERIC-HLR_R12-0_DEACT_BS3G

Table 444: C_ERIC-HLR_R12-0_DEACT_CAW

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 445: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_DEACT_CAW A_ERIC-HLR_R12-0_DEACT_CAW

Page 552: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 4: Service Definition

538 Oracle Corporation

C_ERIC-HLR_R12-0_DEACT_CFBDeactivates the call forwarding on mobile subscriber busy feature.

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_DEACT_CFNRCDeactivates the call forwarding on mobile subscriber not reachable feature.

Table 446: C_ERIC-HLR_R12-0_DEACT_CFB

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 447: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_DEACT_CFB A_ERIC-HLR_R12-0_DEACT_CFB

Table 448: C_ERIC-HLR_R12-0_DEACT_CFNRC

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 553: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

CSDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 539

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_DEACT_CFNRYDeactivates the call forwarding on no reply feature.

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

Table 449: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_DEACT_CFNRC A_ERIC-HLR_R12-0_DEACT_CFNRC

Table 450: C_ERIC-HLR_R12-0_DEACT_CFNRY

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 451: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_DEACT_CFNRY A_ERIC-HLR_R12-0_DEACT_CFNRY

Page 554: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 4: Service Definition

540 Oracle Corporation

C_ERIC-HLR_R12-0_DEACT_CFUDeactivates the call forwarding unconditional feature.

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_DEACT_CLIPDeactivates the calling line identification presentation feature.

Table 452: C_ERIC-HLR_R12-0_DEACT_CFU

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 453: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_DEACT_CFU A_ERIC-HLR_R12-0_DEACT_CFU

Table 454: C_ERIC-HLR_R12-0_DEACT_CLIP

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 555: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

CSDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 541

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_DEACT_CLIRDeactivates the calling line identification restriction feature.

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

Table 455: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_DEACT_CLIP A_ERIC-HLR_R12-0_DEACT_CLIP

Table 456: C_ERIC-HLR_R12-0_DEACT_CLIR

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 457: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_DEACT_CLIR A_ERIC-HLR_R12-0_DEACT_CLIR

Page 556: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 4: Service Definition

542 Oracle Corporation

C_ERIC-HLR_R12-0_DEACT_COLPDeactivates the connected line identification presentation feature.

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_DEACT_COLRDeactivates the connected line identification restriction feature.

Table 458: C_ERIC-HLR_R12-0_DEACT_COLP

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 459: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_DEACT_COLP A_ERIC-HLR_R12-0_DEACT_COLP

Table 460: C_ERIC-HLR_R12-0_DEACT_COLR

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 557: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

CSDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 543

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_DEACT_EMLPPDeactivates the enhanced multi-level precedence and pre-emption feature.

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

Table 461: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_DEACT_COLR A_ERIC-HLR_R12-0_DEACT_COLR

Table 462: C_ERIC-HLR_R12-0_DEACT_EMLPP

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 463: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_DEACT_EMLPP A_ERIC-HLR_R12-0_DEACT_EMLPP

Page 558: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 4: Service Definition

544 Oracle Corporation

C_ERIC-HLR_R12-0_DEACT_HOLDDeactivates the call hold feature.

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_DEACT_ICIDeactivates the immediate call itemization feature.

Table 464: C_ERIC-HLR_R12-0_DEACT_HOLD

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 465: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_DEACT_HOLD A_ERIC-HLR_R12-0_DEACT_HOLD

Table 466: C_ERIC-HLR_R12-0_DEACT_ICI

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 559: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

CSDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 545

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_DEACT_MPTYDeactivates the multi party service feature.

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

Table 467: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_DEACT_ICI A_ERIC-HLR_R12-0_DEACT_ICI

Table 468: C_ERIC-HLR_R12-0_DEACT_MPTY

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 469: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_DEACT_MPTY A_ERIC-HLR_R12-0_DEACT_MPTY

Page 560: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 4: Service Definition

546 Oracle Corporation

C_ERIC-HLR_R12-0_DEACT_OBADeactivates the operator determined barring of all incoming and outgoing calls.

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_DEACT_OBOPREDeactivates the operator determined barring of outgoing premium rate calls (Entertainment) feature.

Table 470: C_ERIC-HLR_R12-0_DEACT_OBA

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 471: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_DEACT_OBA A_ERIC-HLR_R12-0_DEACT_OBA

Table 472: C_ERIC-HLR_R12-0_DEACT_OBOPRE

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

Page 561: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

CSDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 547

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_DEACT_OBOPRIDeactivates the operator determined barring of outgoing premium rate calls (Information) feature.

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 473: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_DEACT_OBOPRE A_ERIC-HLR_R12-0_DEACT_OBOPRE

Table 474: C_ERIC-HLR_R12-0_DEACT_OBOPRI

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 472: C_ERIC-HLR_R12-0_DEACT_OBOPRE

Parameter Name Description RangeDefault Value

Type Class

Page 562: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 4: Service Definition

548 Oracle Corporation

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_DEACT_OBSSMDeactivates the operator determined barring of supplementary service management feature.

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

Table 475: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_DEACT_OBOPRI A_ERIC-HLR_R12-0_DEACT_OBOPRI

Table 476: C_ERIC-HLR_R12-0_DEACT_OBSSM

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 477: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_DEACT_OBSSM A_ERIC-HLR_R12-0_DEACT_OBSSM

Page 563: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

CSDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 549

C_ERIC-HLR_R12-0_DEACT_OBZIDeactivates the operator determined barring of incoming inter-zonal calls.

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_DEACT_OINDeactivates the originating intelligent network feature.

Table 478: C_ERIC-HLR_R12-0_DEACT_OBZI

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 479: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_DEACT_OBZI A_ERIC-HLR_R12-0_DEACT_OBZI

Table 480: C_ERIC-HLR_R12-0_DEACT_OIN

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 564: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 4: Service Definition

550 Oracle Corporation

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_DEACT_OSB1Deactivates the operator determined barring of specific barring in HPLMN (Type1) feature.

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

Table 481: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_DEACT_OIN A_ERIC-HLR_R12-0_DEACT_OIN

Table 482: C_ERIC-HLR_R12-0_DEACT_OSB1

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 483: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_DEACT_OSB1 A_ERIC-HLR_R12-0_DEACT_OSB1

Page 565: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

CSDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 551

C_ERIC-HLR_R12-0_DEACT_OSB2Deactivates the operator determined barring of specific barring in HPLMN (Type 2) feature.

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_DEACT_OSB3Deactivates the operator determined barring of specific barring in HPLMN (Type 3) feature.

Table 484: C_ERIC-HLR_R12-0_DEACT_OSB2

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 485: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_DEACT_OSB2 A_ERIC-HLR_R12-0_DEACT_OSB2

Table 486: C_ERIC-HLR_R12-0_DEACT_OSB3

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 566: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 4: Service Definition

552 Oracle Corporation

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_DEACT_OSB4Deactivates the operator determined barring of specific barring in HPLMN (Type 4) feature.

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

Table 487: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_DEACT_OSB3 A_ERIC-HLR_R12-0_DEACT_OSB3

Table 488: C_ERIC-HLR_R12-0_DEACT_OSB4

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 489: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_DEACT_OSB4 A_ERIC-HLR_R12-0_DEACT_OSB4

Page 567: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

CSDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 553

C_ERIC-HLR_R12-0_DEACT_PAIDeactivates the positioning allowed indicator feature.

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_DEACT_SOCFRCDeactivates the subscription option call forwarding on mobile subscriber not reachable feature.

Table 490: C_ERIC-HLR_R12-0_DEACT_PAI

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 491: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_DEACT_PAI A_ERIC-HLR_R12-0_DEACT_PAI

Table 492: C_ERIC-HLR_R12-0_DEACT_SOCFRC

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

Page 568: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 4: Service Definition

554 Oracle Corporation

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_DEACT_SOCFUDeactivates the subscription option call forwarding unconditional feature.

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 493: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_DEACT_SOCFRC A_ERIC-HLR_R12-0_DEACT_SOCFRC

Table 494: C_ERIC-HLR_R12-0_DEACT_SOCFU

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 492: C_ERIC-HLR_R12-0_DEACT_SOCFRC

Parameter Name Description RangeDefault Value

Type Class

Page 569: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

CSDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 555

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_DEACT_SOCLIPDeactivates the subscription option calling line identification presentation feature.

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

Table 495: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_DEACT_SOCFU A_ERIC-HLR_R12-0_DEACT_SOCFU

Table 496: C_ERIC-HLR_R12-0_DEACT_SOCLIP

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 497: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_DEACT_SOCLIP A_ERIC-HLR_R12-0_DEACT_SOCLIP

Page 570: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 4: Service Definition

556 Oracle Corporation

C_ERIC-HLR_R12-0_DEACT_SOCOLPDeactivates the subscription option connected line identification presentation feature.

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_DEACT_TINDeactivates the terminating intelligent network feature.

Table 498: C_ERIC-HLR_R12-0_DEACT_SOCOLP

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 499: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_DEACT_SOCOLP A_ERIC-HLR_R12-0_DEACT_SOCOLP

Table 500: C_ERIC-HLR_R12-0_DEACT_TIN

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 571: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

CSDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 557

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_DEACT_TS11Deactivates the telephony feature.

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

Table 501: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_DEACT_TIN A_ERIC-HLR_R12-0_DEACT_TIN

Table 502: C_ERIC-HLR_R12-0_DEACT_TS11

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 503: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_DEACT_TS11 A_ERIC-HLR_R12-0_DEACT_TS11

Page 572: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 4: Service Definition

558 Oracle Corporation

C_ERIC-HLR_R12-0_DEACT_TS21Deactivates the short message MT/PP feature.

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_DEACT_TS22Deactivates the short message MO/PP feature.

Table 504: C_ERIC-HLR_R12-0_DEACT_TS21

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 505: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_DEACT_TS21 A_ERIC-HLR_R12-0_DEACT_TS21

Table 506: C_ERIC-HLR_R12-0_DEACT_TS22

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 573: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

CSDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 559

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_DEACT_TS61Deactivates the alternate speech/fax group 3 transparent feature.

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

Table 507: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_DEACT_TS22 A_ERIC-HLR_R12-0_DEACT_TS22

Table 508: C_ERIC-HLR_R12-0_DEACT_TS61

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 509: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_DEACT_TS61 A_ERIC-HLR_R12-0_DEACT_TS61

Page 574: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 4: Service Definition

560 Oracle Corporation

C_ERIC-HLR_R12-0_DEACT_TS62Deactivates the automatic facsimile group 3 feature.

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_DEACT_TSMODeactivates the transfer of short message option feature.

Table 510: C_ERIC-HLR_R12-0_DEACT_TS62

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 511: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_DEACT_TS62 A_ERIC-HLR_R12-0_DEACT_TS62

Table 512: C_ERIC-HLR_R12-0_DEACT_TSMO

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 575: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

CSDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 561

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_DELETE_MULTIPLE-SUBSCRIPTIONEnd Multiple Subscription data in HLR.

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

Table 513: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_DEACT_TSMO A_ERIC-HLR_R12-0_DEACT_TSMO

Table 514: C_ERIC-HLR_R12-0_DELETE_MULTIPLE-SUBSCRIPTION

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote Network Element name

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 515: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_DELETE_MULTIPLE-SUBSCRIPTION

A_ERIC-HLR_R12-0_DELETE_MULTIPLE-SUBSCRIPTION

Page 576: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 4: Service Definition

562 Oracle Corporation

C_ERIC-HLR_R12-0_DELETE_SUBSCRIPTIONDeletes the GSM HLR subscription feature.

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

Table 516: C_ERIC-HLR_R12-0_DELETE_SUBSCRIPTION

Parameter Name Description RangeDefault Value

Type Class

IMSI International Mobile Subscriber Identity.

Digit String 6-15 digits. Each digit is 0-9.

S O

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

TYPE_OF_QUERY Flag indicating the type of query to be performed.

Supported values are ALL,SUDA,SSDA,LOC and PDP.

Table 517: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_DELETE_SUBSCRIPTION A_ERIC-HLR_R12-0_GET_SUBSCRIBER-ALLDATA

A_ERIC-HLR_R12-0_VIRTUAL_ADD-GPRS

A_ERIC-HLR_R12-0_VIRTUAL_ADD-FEATURES

A_ERIC-HLR_R12-0_VIRTUAL_ADD-NAM

A_ERIC-HLR_R12-0_VIRTUAL_CREATE-SUBSCRIPTION

A_ERIC-HLR_R12-0_DELETE_SUBSCRIPTION

Page 577: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

CSDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 563

C_ERIC-HLR_R12-0_GET_CAMELQueries the CAMEL subscription data.

Table 518: C_ERIC-HLR_R12-0_GET_CAMEL

Parameter Name Description RangeDefault Value

Type Class

CAMEL_SUBSCRIPTION_OPTIONS

CAMEL subscription options.

Valid value OPT.(When optional parameter OPT is given in the command, CAMEL subscription options are printed)

S O

CAMEL_SUBSCRIPTION_PROFILE

CAMEL subscription profile.

Valid values are from 1 to 255.

S O

EXTENDED_CAMEL_DATA

Extended CAMEL data.

Valid value EXT.(When optional parameter EXT is given in the command, extended CAMEL data are printed).

S O

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S O

NE_ID_ERIC-HLR Remote network element name

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

TRIGGERING_CRITERIA

CAMEL triggering criteria.

Valid value CRIT.(When optional parameter CRIT is given in the command, CAMEL triggering criteria are printed)

S O

Page 578: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 4: Service Definition

564 Oracle Corporation

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_GET_PDPQueries the packet data protocol context data for a series of connected subscribers feature.

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

Table 519: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_GET_CAMEL A_ERIC-HLR_R12-0_GET_CAMEL

Table 520: C_ERIC-HLR_R12-0_GET_PDP

Parameter Name Description RangeDefault Value

Type Class

IMSIS IMSI series S O

MSISDNS MSISDN series. S O

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 521: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_GET_PDP A_ERIC-HLR_R12-0_GET_PDP

Page 579: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

CSDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 565

C_ERIC-HLR_R12-0_GET_SERVICE-ADDRESSESQueries all the Service Center addresses stored in the message waiting data list.

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_GET_SUBSCRIBERQueries the HLR subscriber.

Table 522: C_ERIC-HLR_R12-0_GET_SERVICE-ADDRESSES

Parameter Name Description RangeDefault Value

Type Class

IMSI IMSI. S O

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S O

NE_ID_ERIC-HLR Remote network element name

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 523: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_GET_SERVICE-ADDRESSES

A_ERIC-HLR_R12-0_GET_SERVICE-ADDRESSES

Table 524: C_ERIC-HLR_R12-0_GET_SUBSCRIBER

Parameter Name Description RangeDefault Value

Type Class

CONNECTED Flag to query on all connected subscribers. Valid values are YES or NO.

S O

IMSI IMSI S O

Page 580: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 4: Service Definition

566 Oracle Corporation

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_GET_SUBSCRIPTIONQueries the HLR subscription feature.

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S O

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

TYPE_OF_QUERY Flag indicating the type of query to be performed. Supported values are ALL, SUDA, SSDA, LOC and PDP.

S O

Table 525: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_GET_SUBSCRIBER A_ERIC-HLR_R12-0_GET_SUBSCRIBER

Table 526: C_ERIC-HLR_R12-0_GET_SUBSCRIPTION

Parameter Name Description RangeDefault Value

Type Class

CONNECTED Flag to query on all connected subscribers. Valid values are YES or NO.

S O

IMSI IMSI. S O

Table 524: C_ERIC-HLR_R12-0_GET_SUBSCRIBER

Parameter Name Description RangeDefault Value

Type Class

Page 581: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

CSDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 567

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_MODIFY_IMSIModifies the IMSI of HLR Subscriber.

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S O

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

TYPE_OF_QUERY Flag indicating the type of query to be performed. Supported values are ALL, SUDA, SSDA, LOC and PDP.

S O

Table 527: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_GET_SUBSCRIPTION A_ERIC-HLR_R12-0_GET_SUBSCRIPTION

Table 528: C_ERIC-HLR_R12-0_MODIFY_IMSI

Parameter Name Description RangeDefault Value

Type Class

DATE Activation date for the new IMSI expressed as: yymmdd.

S O

IMSI IMSI. S O

Table 526: C_ERIC-HLR_R12-0_GET_SUBSCRIPTION

Parameter Name Description RangeDefault Value

Type Class

Page 582: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 4: Service Definition

568 Oracle Corporation

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_MODIFY_IMSI-CANCELCancels the IMSI changeover before the new IMSI active of HLR subscriber feature.

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S O

NEW_IMSI New IMSI. S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 529: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_MODIFY_IMSI A_ERIC-HLR_R12-0_MODIFY_IMSI

Table 530: C_ERIC-HLR_R12-0_MODIFY_IMSI-CANCEL

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S O

NEW_IMSI New IMSI. S O

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 528: C_ERIC-HLR_R12-0_MODIFY_IMSI

Parameter Name Description RangeDefault Value

Type Class

Page 583: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

CSDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 569

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_MODIFY_IMSI-CHANGEOVERModifies the the changeover date of the IMSI of HLR subscriber feature.

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

Table 531: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_MODIFY_IMSI-CANCEL A_ERIC-HLR_R12-0_MODIFY_IMSI-CANCEL

Table 532: C_ERIC-HLR_R12-0_MODIFY_IMSI-CHANGEOVER

Parameter Name Description RangeDefault Value

Type Class

DATE Activation date for the new IMSI expressed as yymmdd.

S O

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S O

NEW_IMSI New IMSI S O

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 533: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_MODIFY_IMSI-CHANGEOVER

A_ERIC-HLR_R12-0_MODIFY_IMSI-CHANGEOVER

Page 584: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 4: Service Definition

570 Oracle Corporation

C_ERIC-HLR_R12-0_MODIFY_IMSI-DEL-DATARemoves the the old data associated with the old IMSI of HLR subscriber feature.

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

Table 534: C_ERIC-HLR_R12-0_MODIFY_IMSI-DEL-DATA

Parameter Name Description RangeDefault Value

Type Class

IMSI IMSI S O

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S O

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 535: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_MODIFY_IMSI-DEL-DATA A_ERIC-HLR_R12-0_GET_IMSI-DEL-DATA

A_ERIC-HLR_R12-0_VIRTUAL_ADD-FEATURES

A_ERIC-HLR_R12-0_VIRTUAL_CREATE-SUBSCRIPTION

A_ERIC-HLR_R12-0_MODIFY_IMSI-DEL-DATA

Page 585: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

CSDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 571

C_ERIC-HLR_R12-0_MODIFY_MULTIPLE-SUBSCRIPTIONModify multiple subscription data.

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

Table 536: C_ERIC-HLR_R12-0_MODIFY_MULTIPLE-SUBSCRIPTION

Parameter Name Description RangeDefault Value

Type Class

ACIMSI Active International Mobile Subscriber Identity.

S O

ERASE Erase Indicator. S O

IMSI International Mobile Subscriber Identity.

S O

MCH Multiple subscription activation mechanism.

S O

MMSISDN Master Mobile Station ISDN Number.

S O

MSISDN Mobile Station ISDN Number.

S R

NE_ID_ERIC-HLR Remote Network Element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes.

S O

Table 537: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_MODIFY_MULTIPLE-SUBSCRIPTION

A_ERIC-HLR_R12-0_MODIFY_MULTIPLE-SUBSCRIPTION

Page 586: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 4: Service Definition

572 Oracle Corporation

C_ERIC-HLR_R12-0_MODIFY_LOC-SERVICESModify Location Services.

Table 538: C_ERIC-HLR_R12-0_MODIFY_LOC-SERVICES

Parameter Name Description RangeDefault Value

Type Class

CREL Call Related location services privacy class.

Only valid values are YES or NO.

S O

CUNRL Call Unrelated location services privacy class.

Only valid values are YES or NO.

S O

EADD External location services client Address. Defined as E.164 number.

The value must be of length 3 to 15 digits.

S O

EADD_CREL Call Related location services privacy class.

Only valid values are YES or NO.

S O

EADD_CUNRL Call Unrelated location services privacy class.

Only valid values are YES or NO.

S O

GRES Restriction on the Gateway Mobile Location Center (GMLC).

Valid values are 0 - only GMLCs defined in subscriber GMLC address list, 1 - any GMLC in the home country.

S O

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote Network Element name

S R

Page 587: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

CSDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 573

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

NOTF Location request restriction related to the notification to the mobile subscriber.

Valid values are 0-location request allowed without notification,1- location request with notification,2-location request with notification and privacy verification allowed,3-location request with notification and privacy verification restricted

S O

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

SERVT Public Land Mobile Network (PLMN) operator LCS privacy class Service type.

The valid values are a list from 0 to 127.

S O

Table 539: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_MODIFY_LOC-SERVICES A_ERIC-HLR_R12-0_MODIFY_LOC-SERVICES

Table 538: C_ERIC-HLR_R12-0_MODIFY_LOC-SERVICES

Parameter Name Description RangeDefault Value

Type Class

Page 588: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 4: Service Definition

574 Oracle Corporation

C_ERIC-HLR_R12-0_MODIFY_SUBSCRIPTIONModifies the GSM HLR subscription feature.

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

Table 540: C_ERIC-HLR_R12-0_MODIFY_SUBSCRIPTION

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

PROFILE Profile number. Numeral 0 - 255. S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

SUD_CODE Subscriber data code. S O

SUD_VALUE Subscriber data value. S O

IMSI International Mobile Subscriber Identity

Digit String 6-15 digits. Each digit is 0-9.

S O

TYPE_OF_QUERY Flag indicating the type of query to be performed.

Supported values are ALL,SUDA,SSDA,LOC and PDP.

ALL S O

Table 541: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_MODIFY_SUBSCRIPTION A_ERIC-HLR_R12-0_GET_SUBSCRIPTION-RB

A_ERIC-HLR_R12-0_GET_IMSI-DEL-DATA

A_ERIC-HLR_R12-0_MODIFY_SUBSCRIPTION

Page 589: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

CSDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 575

C_ERIC-HLR_R12-0_MOD_ACCModifies the Account Code.

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_MOD_AOCModifies the advice of charge feature.

Table 542: C_ERIC-HLR_R12-0_MOD_ACC

Parameter Name Description RangeDefault Value

Type Class

ACC_VALUE Subscriber data value. 0 - 2 S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 543: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_MOD_ACC A_ERIC-HLR_R12-0_GET_SUBSCRIBER-RB

A_ERIC-HLR_R12-0_MOD_ACC

Table 544: C_ERIC-HLR_R12-0_MOD_AOC

Parameter Name Description RangeDefault Value

Type Class

AOC_VALUE Subscriber data value. 0 - 2 S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

Page 590: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 4: Service Definition

576 Oracle Corporation

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_MOD_BS2FModifies the fall-back asynchronous bearer service feature.

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 545: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_MOD_AOC A_ERIC-HLR_R12-0_GET_SUBSCRIBER-RB

A_ERIC-HLR_R12-0_MOD_AOC

Table 546: C_ERIC-HLR_R12-0_MOD_BS2F

Parameter Name Description RangeDefault Value

Type Class

BS2F_VALUE Subscriber data value. 0 - 5 S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 544: C_ERIC-HLR_R12-0_MOD_AOC

Parameter Name Description RangeDefault Value

Type Class

Page 591: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

CSDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 577

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_MOD_BS3FModifies the fall-back synchronous bearer service feature.

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

Table 547: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_MOD_BS2F A_ERIC-HLR_R12-0_GET_SUBSCRIBER-RB

A_ERIC-HLR_R12-0_MOD_BS2F

Table 548: C_ERIC-HLR_R12-0_MOD_BS3F

Parameter Name Description RangeDefault Value

Type Class

BS3F_VALUE Subscriber data value. 0 - 4 S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 549: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_MOD_BS3F A_ERIC-HLR_R12-0_GET_SUBSCRIBER-RB

A_ERIC-HLR_R12-0_MOD_BS3F

Page 592: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 4: Service Definition

578 Oracle Corporation

C_ERIC-HLR_R12-0_MOD_CAMELModifies the camel services feature.

Table 550: C_ERIC-HLR_R12-0_MOD_CAMEL

Parameter Name Description RangeDefault Value

Type Class

CAMEL_CAPABILITY_HANDLING

CAMEL capability handling.

Range is 1,2,3 or 4.(1-CAMEL phase 1;2-CAMEL phase 2;3-CAMEL phase 3;4-CAMEL phase 4;)

S O

CAMEL_SUBSCRIPTION_PROFILE

CAMEL subscription profile.

1 - 255 S O

DEFAULT_ERROR_HANDLING

Default error handling. 0 - Call released in case of errror in GSM service control function to GSM or GPRS1 - Call continued in case of errror in GSM service control function to GSM or GPRS.

S O

DS_CAMEL_TRIGGER_DETECTION_POINT

Dialled service CAMEL subscription data trigger detection point.

1 - 10 S O

GPRS_TRIGGER_DETECTION_POINT

GPRS CAMEL trigger detection point.

Valid values are 1,2,11,12,14. (1-Attach,2-Change of position GPRS session,11-Packet Data Protocol (PDP) context establishment,12-PDP context establishment acknowledgment,14-Change of position context)

S O

Page 593: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

CSDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 579

GSM_SERVICE_ADDRESS

GSM service control function address.

Defined as international E.164 number.

Defined as internation E.164 number. Range is digit string 3-15 digits.

S O

INHIBITION_INDICATOR

Inhibitor indicator. Y - Terminating trigger detection point will not be sent to the Gateway Mobile Services Switch CenterN -Terminating trigger detection point will always be sent to the Gateway Mobile Services Switch Center

S O

MM_CAMEL_TRIGGER_DETECTION_POINT

Mobility management CAMEL subscription data trigger detection point.

This parameter application system dependent parameter and Valid values are YES or NO.If user give YES MML will modify the service data.

S O

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S O

NE_ID_ERIC-HLR Remote network element name.

S R

ORIG_CAMEL_TRIGGER_DETECTION_POINT

Originating CAMEL subscription data trigger detection point.

Valid values are 2,4.(2-Collected info,4-Route select failure).

S O

ORIG_SMS_TRIGGER_DETECTION_POINT

Originating SMS trigger detection point.

Valid value is 1.(1-SMS collected info).

S O

Table 550: C_ERIC-HLR_R12-0_MOD_CAMEL

Parameter Name Description RangeDefault Value

Type Class

Page 594: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 4: Service Definition

580 Oracle Corporation

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

SERVICE_KEY Service key. 0 - 2147483647 S O

TERM_CAMEL_TRIGGER_DETECTION_POINT

Terminating CAMEL subscription data trigger detection point.

Valid values are 12,13,14.(12-Terminating attempt authorized,13-Terminator busy,14-Terminator no answer).

S O

TERM_SMS_CAMEL_TRIGGER_DETECTION_POINT

Terminating SMS CAMEL subscription data trigger detection point.

Valid value is 2.(2-SMS Delivery Request).

S O

VMSC_TERM_TRIGGER_DETECTION_POINT

Visited mobile switching centre terminating trigger detection point.

Valid values are 12,13,14.(12-Terminating attempt authorized,13-Terminator busy,14-Terminator no answer).

S O

Table 551: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_MOD_CAMEL A_ERIC-HLR_R12-0_GET_CAMEL-RB

A_ERIC-HLR_R12-0_MOD_CAMEL

Table 550: C_ERIC-HLR_R12-0_MOD_CAMEL

Parameter Name Description RangeDefault Value

Type Class

Page 595: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

CSDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 581

C_ERIC-HLR_R12-0_MOD_CAMEL-EXTENDEDModifies the camel extended information.

Table 552: C_ERIC-HLR_R12-0_MOD_CAMEL-EXTENDED

Parameter Name Description RangeDefault Value

Type Class

CAMEL_SUBSCRIPTION_PROFILE

CAMEL subscription profile.

1 - 255 S O

EXT_ORIG_IN_CAPABILITY_INDICATOR

Extended originating intelligent network capability indicator.

0 - 255 S O

EXT_ORIG_IN_CATEGORY_KEY

Extended originating intelligent network category key.

0 - 999 S O

EXT_TERM_IN_CAPABILITY_INDICATOR

Extended terminating intelligent network capability indicator.

0 - 255 S O

EXT_TERM_IN_CATEGORY_KEY

Extended terminating intelligent network category key.

0 - 999 S O

GMSC_2_SUBSCRIPTION_OPTION

GMSC/gsmSCF CAMEL phase 2 support subscription option.

Valid values are 0 and 1.(0-Allow call terminating handling with CAMEL phase 1 invocation when CAMEL phase 2 is not supported in the interrogating GMSC/gsmSCF;1-Apply Operator Determined Barring (ODB) of all incoming calls when CAMEL phase 2 is not supported in the interrogating GMSC/gsmSCF).

S O

Page 596: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 4: Service Definition

582 Oracle Corporation

GMSC_3_SUBSCRIPTION_OPTION

Gateway Mobile Switching Centre (GMSC)/Global System for Mobile Communication Service Control Function(gsmSCF) CAMEL phase 3 support subscription option.

Valid values are 0 and 1.(0-Allow call terminating handling with CAMEL phase 1 invocation when CAMEL phase 2 is not supported in the interrogating GMSC/gsmSCF;1-Apply Operator Determined Barring (ODB) of all incoming calls when CAMEL phase 2 is not supported in the interrogating GMSC/gsmSCF).

S O

GMSC_SUBSCRIPTION_OPTION

GMSC/gsmSCF CAMEL phase 1 support subscription option.

0 - Allow call terminating handling without CAMEL invocation 1 - Apply ODB of all incoming calls

S O

GPRS_SUBSCRIPTION_OPTION

General Packet Radio Service (GPRS) CAMEL phase 3 denied subscription option.

Valid values are 0 and 1.(0-Allow mobile subscriber's registration in the Serving GPRS Support Node (SGSN) without sending GPRS CAMEL phase 3 data when CAMEL phase 3 data is not allowed to be sent to the SGSN;1-Deny mobile subscriber's registration in the SGSN when CAMEL phase 3 data is not allowed to be sent to the SGSN)

S O

Table 552: C_ERIC-HLR_R12-0_MOD_CAMEL-EXTENDED

Parameter Name Description RangeDefault Value

Type Class

Page 597: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

CSDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 583

MC2SO MSC/VLR CAMEL phase 2 denied subscription option.

Valid values are from 0 to 2.(0 Check if mobile subscriber's registration in the serving MSC/VLR with CAMEL phase 1 data can be performed or register without CAMEL data when CAMEL phase 2 data is not allowed to be sent to the MSC/VLR 1 Network induced activation of supplementary service Barring of All Outgoing Calls (BAOC) performed when CAMEL phase 2 data is not allowed to be sent to the serving MSC/VLR 2 Deny mobile subscriber's registration in the serving MSC/VLR when CAMEL phase 2 data is not allowed to be sent to the MSC/VLR)

S O

Table 552: C_ERIC-HLR_R12-0_MOD_CAMEL-EXTENDED

Parameter Name Description RangeDefault Value

Type Class

Page 598: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 4: Service Definition

584 Oracle Corporation

MC3SO Mobile Switching Centre (MSC)/Visitor Location Register (VLR) CAMEL phase 3 denied subscription option.

Valid values are from 0 to 2.(0-Allow mobile subscriber's registration in the Serving GPRS Support Node (SGSN) without sending GPRS CAMEL phase 3 data when CAMEL phase 3 data is not allowed to be sent to the SGSN;1-Deny mobile subscriber's registration in the SGSN when CAMEL phase 3 data is not allowed to be sent to the SGSN)

S O

MCSO MSC/VLR CAMEL phase 1 denied subscription option.

Valid values are from 0 to 2.(0-Allow mobile subscriber's registration in the serving MSC/VLR without sending CAMEL data when CAMEL phase 1 data is not allowed to be sent to the MSC/VLR;1-Network induced activation of supplementary service BAOC performed when CAMEL phase 1 data is not allowed to be sent to the serving MSC/VLR;2-Deny mobile subscriber's registration in the serving MSC/VLR when CAMEL phase 1 data is not allowed to be sent to the MSC/VLR)

S O

Table 552: C_ERIC-HLR_R12-0_MOD_CAMEL-EXTENDED

Parameter Name Description RangeDefault Value

Type Class

Page 599: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

CSDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 585

MOBILITY_MANAGEMENT_SUBSCRIPTION_OPTION

Mobility management CAMEL phase 3 denied subscription option.

Valid values are 0 to 1.(0-Allow mobile subscriber's registration in the serving MSC/VLR without sending mobility management CAMEL phase 3 data when CAMEL phase 3 data is not allowed to be sent to the MSC/VLR 1-Deny mobile subscriber's registration in the serving MSC/VLR when CAMEL phase 3 data is not allowed to be sent to the MSC/VLR )

S O

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S O

NE_ID_ERIC-HLR Remote network element name.

S R

Table 552: C_ERIC-HLR_R12-0_MOD_CAMEL-EXTENDED

Parameter Name Description RangeDefault Value

Type Class

Page 600: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 4: Service Definition

586 Oracle Corporation

ORIGINATING_SMS_SUBSCRIPTION_OPTION

Originating Short Message Service (SMS) CAMEL phase 3 denied subscription option.

Valid values are from 0 to 2.(0-Allow mobile subscriber's registration in the serving node (MSC/VLR or SGSN or both) without sending originating SMS CAMEL phase 3 data when CAMEL phase 3 data is not allowed to be sent to the MSC/VLR or SGSN;1-Network induced service withdrawal of Teleservice Short Message MO/PP (TS22) performed when CAMEL phase 3 data is not allowed to be sent to the MSC/VLR or SGSN;2-Deny mobile subscriber's registration in the serving node (MSC/VLR or SGSN or both) when CAMEL phase 3 data is not allowed to be sent to the MSC/VLR or SGSN)

S O

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 552: C_ERIC-HLR_R12-0_MOD_CAMEL-EXTENDED

Parameter Name Description RangeDefault Value

Type Class

Page 601: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

CSDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 587

SUBSCRIBER_STATE_AND_LOCATION

Subscriber state and location information sending CAMEL subscription option.

0 - Subscriber state and location information are not sent at Send Routing Information MAP version 3 response1 - Subscriber state and location information are sent at Send Routing Information MAP version 3 response

S O

Table 552: C_ERIC-HLR_R12-0_MOD_CAMEL-EXTENDED

Parameter Name Description RangeDefault Value

Type Class

Page 602: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 4: Service Definition

588 Oracle Corporation

TERMINATING_SMS_SUBSCRIPTION_OPTION

Terminating SMS CAMEL phase 4 denied subscription option.

Valid values are from 0 to 2.(0-Allow mobile subscriber's registration in the serving node (MSC/VLR or SGSN or both) without sending terminating SMS CAMEL phase 4 data when terminating SMS CAMEL phase 4 data is not allowed to be sent to the MSC/VLR or SGSN or both;1-Allow mobile subscriber's registration in the serving node (MSC/VLR or SGSN or both) without sending terminating SMS CAMEL phase 4 data, when terminating SMS CAMEL phase 4 data is not allowed to be sent to the MSC/VLR or SGSN or both. Network induced service invocation of an incoming call barring service is applied to mobile terminating short message delivery via MSC or SGSN or both;2-Deny mobile subscriber's registration in the serving node (MSC/VLR or SGSN or both) when terminating SMS CAMEL phase 4 data is not allowed to be sent to the MSC/VLR or SGSN or both)

S O

Table 552: C_ERIC-HLR_R12-0_MOD_CAMEL-EXTENDED

Parameter Name Description RangeDefault Value

Type Class

Page 603: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

CSDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 589

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_MOD_CAPLModifies the channel allocation priority level feature.

TRANSLATION_INFORMATION_FLAG

Translation information flag.

Valid values are 0 and 1.(0-Number length, format and conditional barring checks are performed, when the mobile subscriber or the service provider registers a forwarded-to number;1-Number length, format and conditional barring checks are not performed, when the mobile subscriber or the service provider registers a forwarded-to number)

S O

Table 553: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_MOD_CAMEL-EXTENDED A_ERIC-HLR_R12-0_GET_CAMEL-RB

A_ERIC-HLR_R12-0_MOD_CAMEL-EXTENDED

Table 554: C_ERIC-HLR_R12-0_MOD_CAPL

Parameter Name Description RangeDefault Value

Type Class

CAPL_VALUE Subscriber data value. 0 - 15 S R

Table 552: C_ERIC-HLR_R12-0_MOD_CAMEL-EXTENDED

Parameter Name Description RangeDefault Value

Type Class

Page 604: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 4: Service Definition

590 Oracle Corporation

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_MOD_CATModifies the subscriber category feature.

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 555: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_MOD_CAPL A_ERIC-HLR_R12-0_GET_SUBSCRIBER-RB

A_ERIC-HLR_R12-0_MOD_CAPL

Table 556: C_ERIC-HLR_R12-0_MOD_CAT

Parameter Name Description RangeDefault Value

Type Class

CAT_VALUE Subscriber data value. 0 - 255 S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 554: C_ERIC-HLR_R12-0_MOD_CAPL

Parameter Name Description RangeDefault Value

Type Class

Page 605: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

CSDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 591

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_MOD_DBSGModifies the default basic service group feature.

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

Table 557: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_MOD_CAT A_ERIC-HLR_R12-0_GET_SUBSCRIBER-RB

A_ERIC-HLR_R12-0_MOD_CAT

Table 558: C_ERIC-HLR_R12-0_MOD_DBSG

Parameter Name Description RangeDefault Value

Type Class

DBSG_VALUE Subscriber data value. 1 - 6 S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 559: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_MOD_DBSG A_ERIC-HLR_R12-0_GET_SUBSCRIBER-RB

A_ERIC-HLR_R12-0_MOD_DBSG

Page 606: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 4: Service Definition

592 Oracle Corporation

C_ERIC-HLR_R12-0_MOD_DEMLPPModifies the default enhanced multi-level precedence and pre-emption feature.

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_MOD_FEATURESModifies the multiple features with optimized MMLs feature. Enables massive change of subscriber data.

Table 560: C_ERIC-HLR_R12-0_MOD_DEMLPP

Parameter Name Description RangeDefault Value

Type Class

DEMLPP_VALUE Subscriber data value. 0 - 6 S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 561: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_MOD_DEMLPP A_ERIC-HLR_R12-0_GET_SUBSCRIBER-RB

A_ERIC-HLR_R12-0_MOD_DEMLPP

Table 562: C_ERIC-HLR_R12-0_MOD_FEATURES

Parameter Name Description RangeDefault Value

Type Class

IMSIS IMSI series. Digit String 5-15 digits. Each digit is 0-9.

S O

Page 607: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

CSDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 593

MSISDNS MSISDN series. Digit String 5-15 digits. Each digit is 0-9.

S O

NEWSUBSCRIBER_DATA

Multiple features to be modified using MML optimization for new subscriber data.

Consists of:

NEWSUD[i].CODENEWSUD[i].VALUEwhere i is any number

C N

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

SUBSCRIBER_DATA Multiple features to be modified using MML optimization for subscriber data.

Consists of:

SUD[i].CODESUD[i].VALUE where i is any number

C O

UPDATE_NETWORK Update network flag. Only valid values are YES or NO.

S O

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 562: C_ERIC-HLR_R12-0_MOD_FEATURES

Parameter Name Description RangeDefault Value

Type Class

Page 608: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 4: Service Definition

594 Oracle Corporation

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_MOD_GPRSModifies the GPRS service.

Table 563: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_MOD_FEATURES A_ERIC-HLR_R12-0_MOD_FEATURES

Table 564: C_ERIC-HLR_R12-0_MOD_GPRS

Parameter Name Description RangeDefault Value

Type Class

APNID[++] Access Point Name Identifier.

Valid values are from 0 to 16383.

I O

EQOSID[++] Extended Quality Of Service identifier.

The valid values are from 0 to 4095.

I O

IMSI International Mobile Subscriber Identity.

Digit String 6-15 digits. Each digit is 0-9.

S O

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S O

NE_ID_ERIC-HLR Remote Network Element Name

S R

PDPADD[++] Packet Data Protocol Address.

This value is specified as an IP address. Ex: oc1.oc2.oc3.oc4 where oc is an octet in the range of 0 to 255.

I O

PDPID[++] PDP context identifier. Valid values are from 1 to 10.

I R

PDP_CONTEXT_CHARGING[++]

Packet Data Protocol context charging characteristics.

Valid values are from 1 to 15.

I O

Page 609: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

CSDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 595

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_MOD_HPNModifies the high penetration notification feature.

PDP_TYPE[++] Packet Data Protocol context type.

Valid values are IPV4 - IP version 4 or PPP - Point to Point Protocol.

I O

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

VPLMN_ADDRESS_ALLOWED[++]

Visited Public Land Mobile address allowed.

Valid values are YES or NO.

I O

Table 565: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_MOD_GPRS A_ERIC-HLR_R12-0_GET_PDPDATA-RB

A_ERIC-HLR_R12-0_MOD_GPRS

Table 566: C_ERIC-HLR_R12-0_MOD_HPN

Parameter Name Description RangeDefault Value

Type Class

HPN_VALUE Subscriber data value. 0 - 6 S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

Table 564: C_ERIC-HLR_R12-0_MOD_GPRS

Parameter Name Description RangeDefault Value

Type Class

Page 610: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 4: Service Definition

596 Oracle Corporation

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_MOD_MEMLPPModifies the enhanced multi-level precedence and pre-emption maximum priority level feature.

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 567: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_MOD_HPN A_ERIC-HLR_R12-0_GET_SUBSCRIBER-RB

A_ERIC-HLR_R12-0_MOD_HPN

Table 568: C_ERIC-HLR_R12-0_MOD_MEMLPP

Parameter Name Description RangeDefault Value

Type Class

MEMLPP_VALUE Subscriber data value. 0 - 6 S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 566: C_ERIC-HLR_R12-0_MOD_HPN

Parameter Name Description RangeDefault Value

Type Class

Page 611: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

CSDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 597

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_MOD_NAMModifies the network access mode feature.

Table 569: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_MOD_MEMLPP A_ERIC-HLR_R12-0_GET_SUBSCRIBER-RB

A_ERIC-HLR_R12-0_MOD_MEMLPP

Table 570: C_ERIC-HLR_R12-0_MOD_NAM

Parameter Name Description RangeDefault Value

Type Class

IMSI IMSI. S O

KEEP Flag to specify whether to keep subscriber data or not.

Y/N YES S O

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S O

NAM_VALUE Subscriber data value. 0 - both non GPRS and GPRS1 - non GPRS2 - GPRS

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Page 612: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 4: Service Definition

598 Oracle Corporation

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_MOD_OBIModifies the operator determined barring of all incoming calls feature.

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

Table 571: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_MOD_NAM A_ERIC-HLR_R12-0_GET_SUBSCRIBER-RB

A_ERIC-HLR_R12-0_MOD_NAM

Table 572: C_ERIC-HLR_R12-0_MOD_OBI

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

OBI_VALUE Subscriber data value. 0 - 2 S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 573: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_MOD_OBI A_ERIC-HLR_R12-0_GET_SUBSCRIBER-RB

A_ERIC-HLR_R12-0_MOD_OBI

Page 613: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

CSDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 599

C_ERIC-HLR_R12-0_MOD_OBOModifies the operator determined barring of all outgoing calls feature.

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_MOD_OBRModifies the operator determined barring of roaming feature.

Table 574: C_ERIC-HLR_R12-0_MOD_OBO

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

OBO_VALUE Subscriber data value. 0 - 4 S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 575: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_MOD_OBO A_ERIC-HLR_R12-0_GET_SUBSCRIBER-RB

A_ERIC-HLR_R12-0_MOD_OBO

Table 576: C_ERIC-HLR_R12-0_MOD_OBR

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

Page 614: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 4: Service Definition

600 Oracle Corporation

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_MOD_OBRFModifies the operator determined barring of roaming of registration of forwarded-to number feature.

OBR_VALUE Subscriber data value. 0 - 2 S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 577: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_MOD_OBR A_ERIC-HLR_R12-0_GET_SUBSCRIBER-RB

A_ERIC-HLR_R12-0_MOD_OBR

Table 578: C_ERIC-HLR_R12-0_MOD_OBRF

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

OBRF_VALUE Subscriber data value. 0 - 5 S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 576: C_ERIC-HLR_R12-0_MOD_OBR

Parameter Name Description RangeDefault Value

Type Class

Page 615: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

CSDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 601

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_MOD_OBZOModifies the operator determined barring of outgoing inter-zonal calls feature.

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

Table 579: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_MOD_OBRF A_ERIC-HLR_R12-0_GET_SUBSCRIBER-RB

A_ERIC-HLR_R12-0_MOD_OBRF

Table 580: C_ERIC-HLR_R12-0_MOD_OBZO

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

OBZO_VALUE Subscriber data value. 0 - 3 S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 581: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_MOD_OBZO A_ERIC-HLR_R12-0_GET_SUBSCRIBER-RB

A_ERIC-HLR_R12-0_MOD_OBZO

Page 616: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 4: Service Definition

602 Oracle Corporation

C_ERIC-HLR_R12-0_MOD_OFAModifies the origin for forwarded-to number analysis feature.

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_MOD_OICKModifies the originating intelligent network category key feature.

Table 582: C_ERIC-HLR_R12-0_MOD_OFA

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

OFA_VALUE Subscriber data value. 0 - 511 S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 583: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_MOD_OFA A_ERIC-HLR_R12-0_GET_SUBSCRIBER-RB

A_ERIC-HLR_R12-0_MOD_OFA

Table 584: C_ERIC-HLR_R12-0_MOD_OICK

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

Page 617: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

CSDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 603

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_MOD_PICIModifies the primary inter-exchange carrier identity feature.

OICK_VALUE Subscriber data value. 0 - 999 S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 585: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_MOD_OICK A_ERIC-HLR_R12-0_GET_SUBSCRIBER-RB

A_ERIC-HLR_R12-0_MOD_OICK

Table 586: C_ERIC-HLR_R12-0_MOD_PICI

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

PICI_VALUE Subscriber data value. 0 - 255 S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 584: C_ERIC-HLR_R12-0_MOD_OICK

Parameter Name Description RangeDefault Value

Type Class

Page 618: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 4: Service Definition

604 Oracle Corporation

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_MOD_PWDModifies the subscriber password feature.

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

Table 587: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_MOD_PICI A_ERIC-HLR_R12-0_GET_SUBSCRIBER-RB

A_ERIC-HLR_R12-0_MOD_PICI

Table 588: C_ERIC-HLR_R12-0_MOD_PWD

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

PWD_VALUE Subscriber data value. 0 - 9999 S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 589: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_MOD_PWD A_ERIC-HLR_R12-0_GET_SUBSCRIBER-RB

A_ERIC-HLR_R12-0_MOD_PWD

Page 619: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

CSDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 605

C_ERIC-HLR_R12-0_MOD_REGSERModifies the regional services feature.

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_MOD_SCHARModifies the subscriber charging characteristics feature.

Table 590: C_ERIC-HLR_R12-0_MOD_REGSER

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

REGSER_VALUE Subscriber data value. 0 - 65534 S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 591: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_MOD_REGSER A_ERIC-HLR_R12-0_GET_SUBSCRIBER-RB

A_ERIC-HLR_R12-0_MOD_REGSER

Table 592: C_ERIC-HLR_R12-0_MOD_SCHAR

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

Page 620: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 4: Service Definition

606 Oracle Corporation

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_MOD_SOCBModifies the subscription option of control of barring services feature.

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

SCHAR_VALUE Subscriber data value. 1 - 15 S R

Table 593: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_MOD_SCHAR A_ERIC-HLR_R12-0_GET_SUBSCRIBER-RB

A_ERIC-HLR_R12-0_MOD_SCHAR

Table 594: C_ERIC-HLR_R12-0_MOD_SOCB

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

SOCB_VALUE Subscriber data value. 0 - 3 S R

Table 592: C_ERIC-HLR_R12-0_MOD_SCHAR

Parameter Name Description RangeDefault Value

Type Class

Page 621: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

CSDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 607

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_MOD_SOCFBModifies the subscription option of call forwarding on mobile subscriber busy feature.

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

Table 595: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_MOD_SOCB A_ERIC-HLR_R12-0_GET_SUBSCRIBER-RB

A_ERIC-HLR_R12-0_MOD_SOCB

Table 596: C_ERIC-HLR_R12-0_MOD_SOCFB

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

SOCFB_VALUE Subscriber data value. 0 - 3 S R

Table 597: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_MOD_SOCFB A_ERIC-HLR_R12-0_GET_SUBSCRIBER-RB

A_ERIC-HLR_R12-0_MOD_SOCFB

Page 622: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 4: Service Definition

608 Oracle Corporation

C_ERIC-HLR_R12-0_MOD_SOCFRYModifies the subscription option of call forwarding on no reply feature.

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_MOD_SOCLIRModifies the subscription option of calling line identification restriction feature.

Table 598: C_ERIC-HLR_R12-0_MOD_SOCFRY

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

SOCFRY_VALUE Subscriber data value. 0 - 3 S R

Table 599: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_MOD_SOCFRY A_ERIC-HLR_R12-0_GET_SUBSCRIBER-RB

A_ERIC-HLR_R12-0_MOD_SOCFRY

Table 600: C_ERIC-HLR_R12-0_MOD_SOCLIR

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

Page 623: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

CSDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 609

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_MOD_SODCFModifies the subscription option of notification of default call forwarding feature.

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

SOCLIR_VALUE Subscriber data value. 0 - 2 S R

Table 601: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_MOD_SOCLIR A_ERIC-HLR_R12-0_GET_SUBSCRIBER-RB

A_ERIC-HLR_R12-0_MOD_SOCLIR

Table 602: C_ERIC-HLR_R12-0_MOD_SODCF

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

SODCF_VALUE Subscriber data value. 0 - 2 S R

Table 600: C_ERIC-HLR_R12-0_MOD_SOCLIR

Parameter Name Description RangeDefault Value

Type Class

Page 624: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 4: Service Definition

610 Oracle Corporation

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_MOD_SOSDCFModifies the subscription option for specification of forwarding conditions for default call forwarding feature.

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

Table 603: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_MOD_SODCF A_ERIC-HLR_R12-0_GET_SUBSCRIBER-RB

A_ERIC-HLR_R12-0_MOD_SODCF

Table 604: C_ERIC-HLR_R12-0_MOD_SOSDCF

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

SOSDCF_VALUE Subscriber data value. 0 - 2 S R

Table 605: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_MOD_SOSDCF A_ERIC-HLR_R12-0_GET_SUBSCRIBER-RB

A_ERIC-HLR_R12-0_MOD_SOSDCF

Page 625: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

CSDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 611

C_ERIC-HLR_R12-0_MOD_STYPEModifies the subscription type feature.

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

Table 606: C_ERIC-HLR_R12-0_MOD_STYPE

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

STYPE_VALUE Subscriber data value. 0 - 127 S R

IMSI International Mobile Subscriber Identity.

Digit String 6-15 digits. Each digit is 0-9.

S O

SUB_CODE Subscriber Data Code S O

Table 607: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_MOD_STYPE A_ERIC-HLR_R12-0_GET_SUBSCRIBER-RB

A_ERIC-HLR_R12-0_MOD_STYPE

Page 626: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 4: Service Definition

612 Oracle Corporation

C_ERIC-HLR_R12-0_MOD_TICKModifies the terminating intelligent network category key feature.

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

Table 608: C_ERIC-HLR_R12-0_MOD_TICK

Parameter Name Description RangeDefault Value

Type Class

IMSI International Mobile Subscriber Identity

Digit String 6-15 digits. Each digit is 0-9.

S O

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

SUB_CODE Subscriber Data Code. S O

TICK_VALUE Subscriber data value. Range is from 0 to 999. S R

Table 609: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_MOD_TICK A_ERIC-HLR_R12-0_GET_SUBSCRIBER-RB

A_ERIC-HLR_R12-0_MOD_TICK

Page 627: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

CSDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 613

C_ERIC-HLR_R12-0_REM_AMSISDNRemoves the additional MSISDN feature.

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_REM_APNRemoves the access point name feature.

Table 610: C_ERIC-HLR_R12-0_REM_AMSISDN

Parameter Name Description RangeDefault Value

Type Class

AMSISDN Additional MSISDN. S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 611: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_REM_AMSISDN A_ERIC-HLR_R12-0_REM_AMSISDN

Table 612: C_ERIC-HLR_R12-0_REM_APN

Parameter Name Description RangeDefault Value

Type Class

APN1 Access point name first part.

Text string 1 - 41 characters

S O

APN2 Access point name second part.

Text string 1 - 41 characters

S O

APNID Access point name identifier.

0 - 16383 S O

Page 628: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 4: Service Definition

614 Oracle Corporation

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_REM_BAICRemoves the barring of all incoming calls feature.

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 613: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_REM_APN A_ERIC-HLR_R12-0_REM_APN

Table 614: C_ERIC-HLR_R12-0_REM_BAIC

Parameter Name Description RangeDefault Value

Type Class

BSG Basic service group. S O

KEEP Flag to specify whether to keep subscriber data or not.

Y/N NO S O

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 612: C_ERIC-HLR_R12-0_REM_APN

Parameter Name Description RangeDefault Value

Type Class

Page 629: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

CSDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 615

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_REM_BAOCRemoves the barring of all outgoing calls feature.

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

Table 615: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_REM_BAIC A_ERIC-HLR_R12-0_REM_BAIC

Table 616: C_ERIC-HLR_R12-0_REM_BAOC

Parameter Name Description RangeDefault Value

Type Class

BSG Basic service group. S O

KEEP Flag to specify whether to keep subscriber data or not.

Y/N NO S O

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 617: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_REM_BAOC A_ERIC-HLR_R12-0_REM_BAOC

Page 630: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 4: Service Definition

616 Oracle Corporation

C_ERIC-HLR_R12-0_REM_BICRORemoves the barring of all incoming calls when roaming outside the home PLMN country feature.

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_REM_BOICRemoves the barring of all outgoing international calls feature.

Table 618: C_ERIC-HLR_R12-0_REM_BICRO

Parameter Name Description RangeDefault Value

Type Class

BSG Basic service group. S O

KEEP Flag to specify whether to keep subscriber data or not.

Y/N NO S O

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 619: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_REM_BICRO A_ERIC-HLR_R12-0_REM_BICRO

Table 620: C_ERIC-HLR_R12-0_REM_BOIC

Parameter Name Description RangeDefault Value

Type Class

BSG Basic service group. S O

Page 631: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

CSDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 617

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_REM_BOIEXHRemoves the barring of all outgoing international calls except those directed to the home PLMN country feature.

KEEP Flag to specify whether to keep subscriber data or not.

Y/N NO S O

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 621: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_REM_BOIC A_ERIC-HLR_R12-0_REM_BOIC

Table 622: C_ERIC-HLR_R12-0_REM_BOIEXH

Parameter Name Description RangeDefault Value

Type Class

BSG Basic service group. S O

KEEP Flag to specify whether to keep subscriber data or not.

Y/N NO S O

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

Table 620: C_ERIC-HLR_R12-0_REM_BOIC

Parameter Name Description RangeDefault Value

Type Class

Page 632: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 4: Service Definition

618 Oracle Corporation

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_REM_CAMELRemoves the camel services feature.

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 623: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_REM_BOIEXH A_ERIC-HLR_R12-0_REM_BOIEXH

Table 624: C_ERIC-HLR_R12-0_REM_CAMEL

Parameter Name Description RangeDefault Value

Type Class

CAMEL_CAPABILITY_HANDLING

CAMEL capability handling.

Range is 1,2 ,3 or 4.(1-CAMEL phase 1;2-CAMEL phase 2;3-CAMEL phase 3;4-CAMEL phase 4;)

S O

CAMEL_SUBSCRIPTION_PROFILE

CAMEL subscription profile.

1 - 255 S O

DS_CAMEL_TRIGGER_DETECTION_POINT

Dialled service CAMEL subscription data trigger detection point.

Valid values are from 1 to 10 and ALL( All dialled service CAMEL TDPs).

S O

Table 622: C_ERIC-HLR_R12-0_REM_BOIEXH

Parameter Name Description RangeDefault Value

Type Class

Page 633: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

CSDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 619

GPRS_TRIGGER_DETECTION_POINT

GPRS CAMEL trigger detection point.

Valid values are 1,2,11,12,14 and ALL. (1-Attach,2-Change of position GPRS session,11-Packet Data Protocol (PDP) context establishment,12-PDP context establishment acknowledgment,14-Change of position context,ALL-All GPRS CAMEL TDPs).

S O

MM_CAMEL_TRIGGER_DETECTION_POINT

Mobility management CAMEL subscription data trigger detection point.

Valid values are from 0 to 4 and ALL.(0-Location update in the same Visitor Location Register (VLR) service area;1-Location update to another VLR service area;2-International Mobile Subscriber Identity (IMSI) attach;3-Mobile Station (MS) initiated IMSI detach (explicit detach);4-Network initiated IMSI detach (implicit detach);ALL-All mobility management CAMEL TDPs).

S O

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S O

NE_ID_ERIC-HLR Remote network element name.

S R

Table 624: C_ERIC-HLR_R12-0_REM_CAMEL

Parameter Name Description RangeDefault Value

Type Class

Page 634: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 4: Service Definition

620 Oracle Corporation

ORIG_CAMEL_TRIGGER_DETECTION_POINT

Originating CAMEL subscription data trigger detection point.

Valid values are 2,4 and ALL.(2-Collected info,4-Route select failure,ALL-All originating CAMEL TDPs).

S O

ORIG_SMS_TRIGGER_DETECTION_POINT

Originating SMS trigger detection point.

Valid value is 1 and ALL.(1-SMS collected info,ALL-All originating SMS CAMEL TDPs).

S O

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

TERM_CAMEL_TRIGGER_DETECTION_POINT

Terminating CAMEL subscription data trigger detection point.

Valid values are 12,13,14 and ALL.(12-Terminating attempt authorized,13-Terminator busy,14-Terminator no answer,ALL-All terminating CAMEL TDPs).

S O

TERM_SMS_CAMEL_TRIGGER_DETECTION_POINT

Terminating SMS CAMEL subscription data trigger detection point.

Valid value is 2 and ALL.(2-SMS Delivery Request,ALL-All terminating SMS CAMEL TDPs).

S O

VMSC_TERM_TRIGGER_DETECTION_POINT

Visited mobile switching centre terminating trigger detection point.

Valid values are 12,13,14 and ALL.(12-Terminating attempt authorized,13-Terminator busy,14-Terminator no answer,ALL-All VMSC terminating CAMEL TDPs).

S O

Table 624: C_ERIC-HLR_R12-0_REM_CAMEL

Parameter Name Description RangeDefault Value

Type Class

Page 635: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

CSDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 621

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_REM_CAWRemoves the call waiting feature.

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

Table 625: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_REM_CAMEL A_ERIC-HLR_R12-0_REM_CAMEL

Table 626: C_ERIC-HLR_R12-0_REM_CAW

Parameter Name Description RangeDefault Value

Type Class

BSG Basic service group. S O

KEEP Flag to specify whether to keep subscriber data or not.

Y/N NO S O

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 627: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_REM_CAW A_ERIC-HLR_R12-0_REM_CAW

Page 636: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 4: Service Definition

622 Oracle Corporation

C_ERIC-HLR_R12-0_REM_CFBRemoves the call forwarding on mobile subscriber busy feature.

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_REM_CFNRCRemoves the call forwarding on mobile subscriber not reachable feature.

Table 628: C_ERIC-HLR_R12-0_REM_CFB

Parameter Name Description RangeDefault Value

Type Class

BSG Basic service group. S O

KEEP Flag to specify whether to keep subscriber data or not.

Y/N NO S O

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 629: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_REM_CFB A_ERIC-HLR_R12-0_REM_CFB

Table 630: C_ERIC-HLR_R12-0_REM_CFNRC

Parameter Name Description RangeDefault Value

Type Class

BSG Basic service group. S O

Page 637: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

CSDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 623

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_REM_CFNRYRemoves the call forwarding on no reply feature.

KEEP Flag to specify whether to keep subscriber data or not.

Y/N NO S O

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 631: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_REM_CFNRC A_ERIC-HLR_R12-0_REM_CFNRC

Table 632: C_ERIC-HLR_R12-0_REM_CFNRY

Parameter Name Description RangeDefault Value

Type Class

BSG Basic service group. S O

KEEP Flag to specify whether to keep subscriber data or not.

Y/N NO S O

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

Table 630: C_ERIC-HLR_R12-0_REM_CFNRC

Parameter Name Description RangeDefault Value

Type Class

Page 638: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 4: Service Definition

624 Oracle Corporation

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_REM_CFSRemoves the call forwarding services feature.

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 633: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_REM_CFNRY A_ERIC-HLR_R12-0_REM_CFNRY

Table 634: C_ERIC-HLR_R12-0_REM_CFS

Parameter Name Description RangeDefault Value

Type Class

BSG Basic service group. S O

KEEP Flag to specify whether to keep subscriber data or not.

Y/N NO S O

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 632: C_ERIC-HLR_R12-0_REM_CFNRY

Parameter Name Description RangeDefault Value

Type Class

Page 639: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

CSDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 625

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_REM_CFURemoves the call forwarding unconditional feature.

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

Table 635: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_REM_CFS A_ERIC-HLR_R12-0_REM_CFS

Table 636: C_ERIC-HLR_R12-0_REM_CFU

Parameter Name Description RangeDefault Value

Type Class

BSG Basic service group. S O

KEEP Flag to specify whether to keep subscriber data or not.

Y/N NO S O

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 637: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_REM_CFU A_ERIC-HLR_R12-0_REM_CFU

Page 640: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 4: Service Definition

626 Oracle Corporation

C_ERIC-HLR_R12-0_REM_CUGRemoves the closed user group feature.

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_REM_DCFRemoves the default call forwarding feature.

Table 638: C_ERIC-HLR_R12-0_REM_CUG

Parameter Name Description RangeDefault Value

Type Class

INDEX Closed user group index.

0 - 32767

The value ALL may also be used for all closed user groups.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 639: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_REM_CUG A_ERIC-HLR_R12-0_REM_CUG

Table 640: C_ERIC-HLR_R12-0_REM_DCF

Parameter Name Description RangeDefault Value

Type Class

BSG Basic service group. S O

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

Page 641: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

CSDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 627

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_REM_FEATURESDeletes the multiple features with optimized MMLs.

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 641: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_REM_DCF A_ERIC-HLR_R12-0_REM_DCF

Table 642: C_ERIC-HLR_R12-0_REM_FEATURES

Parameter Name Description RangeDefault Value

Type Class

FEATURES Multiple features to be deleted using MML optimization.

Consists of:

FEATURES[i].MSISDNFEATURES[i].SUB_CODEEATURES[i].BSGFEATURES[i].KEEPwhere i is any number

C R

Table 640: C_ERIC-HLR_R12-0_REM_DCF

Parameter Name Description RangeDefault Value

Type Class

Page 642: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 4: Service Definition

628 Oracle Corporation

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_REM_GMLCRemoves the GMLC address feature.

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 643: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_REM_FEATURES A_ERIC-HLR_R12-0_REM_FEATURES

Table 644: C_ERIC-HLR_R12-0_REM_GMLC

Parameter Name Description RangeDefault Value

Type Class

GMLCID GMLC identifier. Upto 5 GMLC ids can be specified.

They can be comma separated.

Example: 0, 255, 13

ALL can be specified to delete all identifiers.

S R

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

Table 642: C_ERIC-HLR_R12-0_REM_FEATURES

Parameter Name Description RangeDefault Value

Type Class

Page 643: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

CSDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 629

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_REM_GPRSRemoves the GPRS services feature.

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 645: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_REM_GMLC A_ERIC-HLR_R12-0_REM_GMLC

Table 646: C_ERIC-HLR_R12-0_REM_GPRS

Parameter Name Description RangeDefault Value

Type Class

IMSI IMSI. S O

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S O

NE_ID_ERIC-HLR Remote network element name.

S R

PDPID Packet data protocol ID to be deleted. A single PDD ID is allowed or a list of comma separated ID's are allowed. It is also possible to delete all PDP's by setting the value to ALL.

C R

Table 644: C_ERIC-HLR_R12-0_REM_GMLC

Parameter Name Description RangeDefault Value

Type Class

Page 644: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 4: Service Definition

630 Oracle Corporation

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_REM_LOC-SERVICESRemoves the location services feature.

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 647: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_REM_GPRS A_ERIC-HLR_R12-0_GET_PDPID-RB

A_ERIC-HLR_R12-0_REM_GPRS

Table 648: C_ERIC-HLR_R12-0_REM_LOC-SERVICES

Parameter Name Description RangeDefault Value

Type Class

ALLPCL All location services privacy class.

Only valid values are YES or NO

S O

CREL Call related location services privacy class.

Only valid values are YES or NO

S O

CUNRL Call unrelated location services privacy class.

Only valid values are YES or NO

S O

EADD External location services client address.

Defined as E.164 number.

3 - 15 digits S O

Table 646: C_ERIC-HLR_R12-0_REM_GPRS

Parameter Name Description RangeDefault Value

Type Class

Page 645: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

CSDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 631

GRES Restriction on the Gateway Mobile Location Center (GMLC).

Only valid values are YES or NO

S O

INTID Internal identity list. 0 - 4

The list maybe comma separated.

Example: 0,1,3,4

S O

MOCL Location services mobile originating class list.

ALL - all Location class servicesASL - autonomous shelf locationBSL - basic shelf locationTTP - transfer to third party

The list maybe comma separated.

Example: BSL, ASL

If ALL is used the other types may not be used.

S O

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

PLMNO PLMN operator location services privacy class

S O

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 648: C_ERIC-HLR_R12-0_REM_LOC-SERVICES

Parameter Name Description RangeDefault Value

Type Class

Page 646: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 4: Service Definition

632 Oracle Corporation

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_REM_SPNRemoves the single personal number feature.

SERVT Public Land Mobile Network (PLMN) operator LCS privacy class service type.

0 - 127 or ALL S O

UNIV Universal location services privacy class.

Only valid values are YES or NO

S O

Table 649: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_REM_LOC-SERVICES A_ERIC-HLR_R12-0_REM_LOC-SERVICES

Table 650: C_ERIC-HLR_R12-0_REM_SPN

Parameter Name Description RangeDefault Value

Type Class

BSG Basic service group. S O

KEEP Flag to specify whether to keep subscriber data or not.

Y/N NO S O

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 648: C_ERIC-HLR_R12-0_REM_LOC-SERVICES

Parameter Name Description RangeDefault Value

Type Class

Page 647: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

CSDL commands

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 633

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_ERIC-HLR_R12-0_REM_SMS-SPAM-DATADeactivate Short Message Service Centre address series.

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

Table 651: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_REM_SPN A_ERIC-HLR_R12-0_REM_SPN

Table 652: C_ERIC-HLR_R12-0_REM_SMS-SPAM-DATA

Parameter Name Description RangeDefault Value

Type Class

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S R

NE_ID_ERIC-HLR Remote Network Element Name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes.

S O

SCADDS Short Message Service Centre address series.

S O

Table 653: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_REM_SMS-SPAM-DATA A_ERIC-HLR_R12-0_REM_SMS-SPAM-DATA

Page 648: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 4: Service Definition

634 Oracle Corporation

C_ERIC-HLR_R12-0_RESET_LOCATIONSets the location of the mobile subscriber to unknown.

Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

Table 654: C_ERIC-HLR_R12-0_RESET_LOCATION

Parameter Name Description RangeDefault Value

Type Class

IMSI IMSI S O

MSISDN Mobile Station ISDN Number.

Digit String 5-15 digits. Each digit is 0-9.

S O

NE_ID_ERIC-HLR Remote network element name.

S R

RETURN_DATA_PREFIX

Parameter to identify ASDLs for multiple HLR nodes

S O

Table 655: CSDL to ASDL Mapping

CSDL ASDL

C_ERIC-HLR_R12-0_RESET_LOCATION A_ERIC-HLR_R12-0_RESET_LOCATION

Page 649: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 635

5

Configuring ASAP to Support Additional NE Instances

You can configure ASAP to support the NE_ERIC-HLR_R12-0-HOST - NEP configuration using the Service Activation Configuration Tool (SACT). Refer to the ASAP Administration Guide for more information.

Below is an example of the Activation.Configuration.XML file for the Ericsson HLR cartridge.

<?xml version="1.0" encoding="UTF-8"?><activationConfig xmlns="http://www.metasolv.com/ServiceActivation/

2003/ActivationConfig" xmlns:cfg="http://www.mslv.com/studio/acti-vation/model/config" xmlns:route="http://www.mslv.com/studio/acti-vation/model/routing" xmlns:sm="http://www.metasolv.com/ServiceActivation/2003/ServiceModel" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">

<connectionPool name="ERHLRP11"> <device name="eric_hlr_R12_0_telnet_dev1"> <environment>DEVELOPMENT</environment> <lineType>TELNET_CONNECTION</lineType> </device> <device name="eric_hlr_R12_0_telnet_dev2"> <environment>DEVELOPMENT</environment> <lineType>TELNET_CONNECTION</lineType> </device> <device name="eric_hlr_R12_0_telnet_dev3"> <environment>DEVELOPMENT</environment> <lineType>TELNET_CONNECTION</lineType> </device> <device name="eric_hlr_R12_0_telnet_dev4"> <environment>DEVELOPMENT</environment> <lineType>TELNET_CONNECTION</lineType> </device> <device name="eric_hlr_R12_0_telnet_dev5"> <environment>DEVELOPMENT</environment> <lineType>TELNET_CONNECTION</lineType> </device> <device name="eric_hlr_R12_0_telnet_dev6"> <environment>DEVELOPMENT</environment> <lineType>TELNET_CONNECTION</lineType> </device> <device name="eric_hlr_R12_0_telnet_dev7"> <environment>DEVELOPMENT</environment> <lineType>TELNET_CONNECTION</lineType> </device>

Page 650: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 5: Configuring ASAP to Support Additional NE Instances

636 Oracle Corporation

<device name="eric_hlr_R12_0_telnet_dev8"> <environment>DEVELOPMENT</environment> <lineType>TELNET_CONNECTION</lineType> </device> <device name="eric_hlr_R12_0_telnet_dev9"> <environment>DEVELOPMENT</environment> <lineType>TELNET_CONNECTION</lineType> </device> <device name="eric_hlr_R12_0_telnet_dev10"> <environment>DEVELOPMENT</environment> <lineType>TELNET_CONNECTION</lineType> </device> <device name="eric_hlr_R12_0_telnet_dev11"> <environment>DEVELOPMENT</environment> <lineType>TELNET_CONNECTION</lineType> </device> <device name="eric_hlr_R12_0_telnet_dev12"> <environment>DEVELOPMENT</environment> <lineType>TELNET_CONNECTION</lineType> </device> <device name="eric_hlr_R12_0_telnet_dev13"> <environment>DEVELOPMENT</environment> <lineType>TELNET_CONNECTION</lineType> </device> <device name="eric_hlr_R12_0_telnet_dev14"> <environment>DEVELOPMENT</environment> <lineType>TELNET_CONNECTION</lineType> </device> <device name="eric_hlr_R12_0_telnet_dev15"> <environment>DEVELOPMENT</environment> <lineType>TELNET_CONNECTION</lineType> </device> <device name="eric_hlr_R12_0_telnet_dev16"> <environment>DEVELOPMENT</environment> <lineType>TELNET_CONNECTION</lineType> </device> </connectionPool> <element name="NE_ERIC-HLR_R12-0-HOST"> <vendor>ERIC</vendor> <technology>HLR</technology> <softwareLoad>R12-0</softwareLoad> <nepServerName>$NEP</nepServerName> <primaryPool>ERHLRP11</primaryPool> <maximumConnections>16</maximumConnections> <dropTimeout>2</dropTimeout> <spawnThreshold>10</spawnThreshold> <killThreshold>8</killThreshold> <routingElement name="NE_ERIC-HLR_R12-0-HOST"/> <communicationParameter> <label>HOST_IPADDR</label> <value> <value>172.28.144.120</value> </value> <description>The network IP Address for the NE host</

description> <lineType>TELNET_CONNECTION</lineType> </communicationParameter>

Page 651: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Ericsson HLR (Home Location Register) R12.0 Cartridge Guide 637

<communicationParameter> <label>PORT</label> <value> <value>5000</value> </value> <description>Telnet port</description> <lineType>TELNET_CONNECTION</lineType> </communicationParameter> <communicationParameter> <label>HOST_USERID</label> <value> <value>userid</value> </value> <description>Login User Name.</description> <lineType>TELNET_CONNECTION</lineType> </communicationParameter> <communicationParameter> <label>HOST_PASSWORD</label> <value> <value>password</value> </value> <description>Password for the User.</description> <lineType>TELNET_CONNECTION</lineType> </communicationParameter> <communicationParameter> <label>OPEN_TIMEOUT</label> <value> <value>20</value> </value> <description>Connection timeout in seconds</description> <lineType>TELNET_CONNECTION</lineType> </communicationParameter> <communicationParameter> <label>READ_TIMEOUT</label> <value> <value>30</value> </value> <description>Read timeout in seconds</description> <lineType>TELNET_CONNECTION</lineType> </communicationParameter> <communicationParameter> <label>PROMPT</label> <value> <value>&lt;</value> </value> <description>HLR Provisioning prompt</description> <lineType>TELNET_CONNECTION</lineType> </communicationParameter> <communicationParameter> <label>LOGIN_PROMPT</label> <value> <value>USERCODE:</value> </value> <description>Login prompt from the NE.</description> <lineType>TELNET_CONNECTION</lineType> </communicationParameter> <communicationParameter>

Page 652: Oracle Communications ASAP Ericsson HLR R12.0 Cartridge Guide

Chapter 5: Configuring ASAP to Support Additional NE Instances

638 Oracle Corporation

<label>PASSWORD_PROMPT</label> <value> <value>PASSWORD:</value> </value> <description>Password prompt from the NE.</description> <lineType>TELNET_CONNECTION</lineType> </communicationParameter> <communicationParameter> <label>DOMAIN_PROMPT</label> <value> <value>DOMAIN:</value> </value> <description>Login prompt from the NE.</description> <lineType>TELNET_CONNECTION</lineType> </communicationParameter> <communicationParameter> <label>DOMAIN_PASSWORD</label> <value> <value>pthlr1d</value> </value> <description>Password prompt from the NE.</description> <lineType>TELNET_CONNECTION</lineType> </communicationParameter> <communicationParameter> <label>RESPONSELOG</label> <value> <value>TRUE</value> </value> <description>Flag to turn on or off response logging</

description> <lineType>TELNET_CONNECTION</lineType> </communicationParameter> </element></activationConfig>

Extracting source filesBefore you can access an XML file to modify it, you must extract it from the .sar file. Use the following procedure to extract source files from the sar file.

To extract source files

1. If necessary, create a repository directory, copy the .sar file to the new directory and un-jar the sar file.

2. After you un-jar the sar file, you can access the XML files.

Loading a new XML fileWhen you finish modifying an XML, you must create a new sar file, then restart the cartridge using the new file.

Follow the instructions in “Testing the installation” on page 14, for directions on how to load a new XML file.