Optimized PET Packers - Comar
Transcript of Optimized PET Packers - Comar
Packaging Quality, Service, and Creativity Since 1949
OptimizedPET PackersNEW State-of-the-art AOKI ISBM provides greater control and precise material distribution for reduced part weight
Sustainability - Source reduction through use of less materialCost Reduction - Lower part weight and cycle timeQuality - New molds and equipment minimize part-to-part variability and performance testing validates functionality and fitness for useReliability - New molds and equipment require less maintenanceAppearance - Uniform side walls result in better consistency of color; surface is free of blemishes
Optimized Bottle Availability
Description Plant
New Weight
(gm)
Overall Height
(in)Diameter
(in)
Label Panel Min Wall
(in)
PZ 300 45mm CT neck Saddle Brook 30.0 4.719 2.719 0.016
PZ 300 45mm HG neck Saddle Brook 30.8 4.719 2.719 0.016
PZ 400 45mm CT neck Saddle Brook 33.5 5.125 2.875 0.016
PZ 400 45mm HG neck Saddle Brook 34.4 5.125 2.875 0.016
PW 500 45mm CT neck Saddle Brook 36.5 5.125 3.156 0.016
PW 500 45mm HG neck Saddle Brook 37.5 5.125 3.156 0.016
PX 500 45mm CT neck Saddle Brook 37.7 5.535 3.100 0.016
PZ 400 53mm CT neck Saddle Brook/Rancho 35.7 5.125 2.875 0.016
PZ 500 53mm CT neck Saddle Brook 40.0 5.808 3.060 0.016
PS 500 53mm CT neck Rancho 40.8 5.332 3.058 0.016
PZ 625 53mm CT neck Saddle Brook/Rancho 43.5 6.102 3.189 0.016
PZ 625 53mm HG neck Saddle Brook 44.0 6.102 3.189 0.016
PZ 750 53mm CT neck Saddle Brook 50.0 6.366 3.465 0.016
PZ 750 53mm HG neck Saddle Brook 50.5 6.366 3.465 0.016
PZ 950 53mm CT neck Saddle Brook 58.2 7.000 3.620 0.016
PZ 950 53mm HG neck Saddle Brook 58.5 7.000 3.620 0.016
For more information, contact your Comar Account Manager
Optimized PET PackersComar is changing the status quo to keep up with consumer preferences and retailer demand for more sustainable packaging that doesn’t sacrifice conve-nience or functionality. The lighter weight bottles are also more suitable for the growing eCommerce channel. Over the past two years Comar has invest-ed in facility infrastructure, production equipment, and tooling to optimize the production of large format PET packer bottles.
n State-of-the-Art AOKI ISBM machines in Rancho Cucamonga, CA and Saddle Brook, NJ supporting east and west coast n New equipment provides greater control and precise material distribution n Overall dimensions match the previous versions of the bottles – no effect on filling or labeling equipmentn Labeling: n Bottles are rigid and rigidity increases when a cap is applied n Side walls: n Flat (not concave or convex) - Smooth (no part lines) - Good perpendicularity to the bottom surface n The bottom surface is clean, no part lines or mold flash (no excess of material) n Comar engineering support available to assist with labelingn Bottles meet USP 671 requirements for MVTR (Moisture Vapor Transmission Rate)n Bottles 300cc and above are available on both east and west coast (exception: PZ-300cc)
n 800-962-6627n [email protected] comar.com 02
59 P
ET 0
5.18