Optimised for modern Your global manufacturing demands ... · IMS Connector Systems GmbH Obere...
Transcript of Optimised for modern Your global manufacturing demands ... · IMS Connector Systems GmbH Obere...
Head office GermanyIMS Connector Systems GmbHObere Hauptstraße 30D-79843 LöffingenTel (+49) 76 54 90 10Fax (+49) 76 54 90 11 99Net www.imscs.comE-mail [email protected]
Sales office ChinaIMS Connector Systems LtdNo 35, Huo Ju RoadSND Science & Technology ParkVCR-Suzhou 215011Tel (+86) 512 6 808 18 16Fax (+86) 512 6 825 23 88E-mail [email protected]
Sales office FranceIMS Connector Systems36, route de la Chapelle sur ErdreF-44300 NantesTel (+33) 2 51 84 24 24Fax (+33) 2 51 84 24 25E-mail [email protected]
Your global
connection
Optimised for modern manufacturing demands
Alt
erat
ions
res
erve
d –
Pri
nted
in
Ger
man
y 6
com
-a-t
ec.c
om 0
07
4-0
3-T
odt
Sales office Northern EuropeIMS Connector Systems ApSFredtoftevej 15 ADK-2980 KokkedalTel (+45) 45 16 09 10Fax (+45) 45 16 09 16E-mail [email protected]
Sales office United KingdomIMS Connector Systems (UK) LtdUnit B3 (1st floor), Cumberland Business Centre Northumberland Road, PortsmouthGB-Hants PO5 1DSTel (+44) 239275 0011Fax (+45) 239275 0022E-mail [email protected]
Sales office USAIMS Connector Systems1400 Waters Ridge DriveLewisville TX 75057Tel (+1) 972 219 1240Fax (+1) 972 436 7141Net www.imscsusa.comE-mail [email protected]
The connectors are delivered on tape and reel packing which meets the requirements of pick and place machines (IEC 286-3: EIA 481).
One of the world’s smallest angle switchesRight angle SMD antenna switchSample-kit AGK-3888
Consisting of 3724 – SMD antenna switch 3798 – SMD antenna switch (reversible polarity) 3725 – Manual testing adapter with SMA interface 3726 – Automatic testing adapter with SMA interface 3857 – Antenna connector K-2082 – Test cable assembly AGK-3882 – Circuit board for testing
Tptp
tLTsmax
Tsmin
t 25° C to Peak
tsPreheat
Ramp-up
Ramp-clown
Critical ZoneTL to Tp
Tem
pera
ture
Time
TL
25
Solder pad layout proposal Soldering surface
Recommended soldering profile IPC/JEDEC J-STD-020CPb-Free Assembly260° C max. Temperature
The SMD antenna switch 3724.99.0030.001 from IMS Connector Systems is a very compact, robust and flexible component. It is one of the smallest angle switches worldwide and features excellent return loss values ensuring reliable performance up to 3 GHz.
Used in mobile communi-cation devices, the switch enables external antennas and test equipment to be connected while separating the internal antenna. This product is suitable for any mobile RF systems and will certainly be interesting for your applications too.
Benefits
Offers reversible polarity for flexible PCB layout
Guarantees a minimum of 5 000 mating cycles
Can be used for all cellular freq. bands such as GSM, DCS, PCS, UMTS, CDMA
Features outstanding return loss values
Shows a very compact and robust design
•
•
•
•
•
One of the world’s smallest angle switches
Technical specifications
Straight test adapter 3725 with SMA interface• Adapter for manual testing
• Snap-on function
• Min. 5 000 mating cycles7,0 18,5
Right angle adapter 3794 with SMA interface• Adapter for manual testing
• Snap-on function
• Min. 5 000 mating cyclesØ 2,5
14,5
5,9
Right angle cable adapter 3727• Adapter for manual testing
• Snap-on function
• For cable RG 316 /U, RG 174,
RG 178, RG 196
• Min. 5 000 mating cycles
Ø 2,514,5
5,9
Antenna connector 3857• Special solution for antenna applications
• Snap-on function
• Min. 5 000 mating cycles
• 10 000 revolving cycles at 180° angleØ 2,5
1,3
10,0
Straight cable adapter 3796• Adapter for manual testing
• Snap-on function
• Min. 5 000 mating cycles
• For cable RG 316 /U, RG 316 U-d 5,922,0
Ø 2,5
Straight test adapter 3726 with SMA interface• Adapter for automatic testing
• Slide-on function
• Float mount installation
• 100 000 mating cyclesØ 2,5
27,7
3,0
2,55,8
Adapters
Concept
1 = Input
2 = Output internal antenna
3 = Output external antenna
Side view
Electrical characteristics Un-switched Switched(Adapter 3725-Type)
Impedance 50 Ω
Operating frequency DC...3 GHz
Return loss <_ 1,0 GHz <_ 2,0 GHz <_ 3,0 GHz
> 30 dB > 27 dB > 25 dB
> 23 dB > 18 dB > 16 dB
Isolation <_ 1,0 GHz <_ 2,0 GHz <_ 3,0 GHz
> 23 dB > 17 dB > 13 dB
Insertion loss <_ 1,0 GHz <_ 2,0 GHz <_ 3,0 GHz
< 0,10 dB < 0,15 dB < 0,20 dB
< 0,10 dB < 0,20 dB < 0,30 dB
Contact resistance Center contact max. initial Outer contact max. initial
100 mΩ 125 mΩ
100 mΩ 125 mΩ
Insulation resistance 1 000 MΩ
Operation voltage AC/DC 100 V
Proof voltage 150 V
Mechanical characteristics
Engagement force max. 12 N
Separating force max. 12 N
Mating cycles min. 5 000
Contact pressure force (switch) min. 0,50 N typ. 0,50 N
Material
Housing bronze
Switching spring stainless steel
Contact spring bronze
Insulator PA46
Plating
Housing Ni + 0,2 µm AU
Switching spring Ni + 0,5 µm AU
Contact spring Ni + 0,5 µm AU
Handling information
Tape & reel
Pick & place
Lead-free soldering
(All electrical and mechanical characteristics are valid for the combination 3724.99.0030.001 and 3725.91.8910.102)
3724 3798
3 3
2 11
plug plug
2
3724
11
2
Top view3798
2
1
The SMD antenna switch 3724.99.0030.001 from IMS Connector Systems is a very compact, robust and flexible component. It is one of the smallest angle switches worldwide and features excellent return loss values ensuring reliable performance up to 3 GHz.
Used in mobile communi-cation devices, the switch enables external antennas and test equipment to be connected while separating the internal antenna. This product is suitable for any mobile RF systems and will certainly be interesting for your applications too.
Benefits
Offers reversible polarity for flexible PCB layout
Guarantees a minimum of 5 000 mating cycles
Can be used for all cellular freq. bands such as GSM, DCS, PCS, UMTS, CDMA
Features outstanding return loss values
Shows a very compact and robust design
•
•
•
•
•
One of the world’s smallest angle switches
Technical specifications
Straight test adapter 3725 with SMA interface• Adapter for manual testing
• Snap-on function
• Min. 5 000 mating cycles7,0 18,5
Right angle adapter 3794 with SMA interface• Adapter for manual testing
• Snap-on function
• Min. 5 000 mating cyclesØ 2,5
14,5
5,9
Right angle cable adapter 3727• Adapter for manual testing
• Snap-on function
• For cable RG 316 /U, RG 174,
RG 178, RG 196
• Min. 5 000 mating cycles
Ø 2,514,5
5,9
Antenna connector 3857• Special solution for antenna applications
• Snap-on function
• Min. 5 000 mating cycles
• 10 000 revolving cycles at 180° angleØ 2,5
1,3
10,0
Straight cable adapter 3796• Adapter for manual testing
• Snap-on function
• Min. 5 000 mating cycles
• For cable RG 316 /U, RG 316 U-d 5,922,0
Ø 2,5
Straight test adapter 3726 with SMA interface• Adapter for automatic testing
• Slide-on function
• Float mount installation
• 100 000 mating cyclesØ 2,5
27,7
3,0
2,55,8
Adapters
Concept
1 = Input
2 = Output internal antenna
3 = Output external antenna
Side view
Electrical characteristics Un-switched Switched(Adapter 3725-Type)
Impedance 50 Ω
Operating frequency DC...3 GHz
Return loss <_ 1,0 GHz <_ 2,0 GHz <_ 3,0 GHz
> 30 dB > 27 dB > 25 dB
> 23 dB > 18 dB > 16 dB
Isolation <_ 1,0 GHz <_ 2,0 GHz <_ 3,0 GHz
> 23 dB > 17 dB > 13 dB
Insertion loss <_ 1,0 GHz <_ 2,0 GHz <_ 3,0 GHz
< 0,10 dB < 0,15 dB < 0,20 dB
< 0,10 dB < 0,20 dB < 0,30 dB
Contact resistance Center contact max. initial Outer contact max. initial
100 mΩ 125 mΩ
100 mΩ 125 mΩ
Insulation resistance 1 000 MΩ
Operation voltage AC/DC 100 V
Proof voltage 150 V
Mechanical characteristics
Engagement force max. 12 N
Separating force max. 12 N
Mating cycles min. 5 000
Contact pressure force (switch) min. 0,50 N typ. 0,50 N
Material
Housing bronze
Switching spring stainless steel
Contact spring bronze
Insulator PA46
Plating
Housing Ni + 0,2 µm AU
Switching spring Ni + 0,5 µm AU
Contact spring Ni + 0,5 µm AU
Handling information
Tape & reel
Pick & place
Lead-free soldering
(All electrical and mechanical characteristics are valid for the combination 3724.99.0030.001 and 3725.91.8910.102)
3724 3798
3 3
2 11
plug plug
2
3724
11
2
Top view3798
2
1
The SMD antenna switch 3724.99.0030.001 from IMS Connector Systems is a very compact, robust and flexible component. It is one of the smallest angle switches worldwide and features excellent return loss values ensuring reliable performance up to 3 GHz.
Used in mobile communi-cation devices, the switch enables external antennas and test equipment to be connected while separating the internal antenna. This product is suitable for any mobile RF systems and will certainly be interesting for your applications too.
Benefits
Offers reversible polarity for flexible PCB layout
Guarantees a minimum of 5 000 mating cycles
Can be used for all cellular freq. bands such as GSM, DCS, PCS, UMTS, CDMA
Features outstanding return loss values
Shows a very compact and robust design
•
•
•
•
•
One of the world’s smallest angle switches
Technical specifications
Straight test adapter 3725 with SMA interface• Adapter for manual testing
• Snap-on function
• Min. 5 000 mating cycles7,0 18,5
Right angle adapter 3794 with SMA interface• Adapter for manual testing
• Snap-on function
• Min. 5 000 mating cyclesØ 2,5
14,5
5,9
Right angle cable adapter 3727• Adapter for manual testing
• Snap-on function
• For cable RG 316 /U, RG 174,
RG 178, RG 196
• Min. 5 000 mating cycles
Ø 2,514,5
5,9
Antenna connector 3857• Special solution for antenna applications
• Snap-on function
• Min. 5 000 mating cycles
• 10 000 revolving cycles at 180° angleØ 2,5
1,3
10,0
Straight cable adapter 3796• Adapter for manual testing
• Snap-on function
• Min. 5 000 mating cycles
• For cable RG 316 /U, RG 316 U-d 5,922,0
Ø 2,5
Straight test adapter 3726 with SMA interface• Adapter for automatic testing
• Slide-on function
• Float mount installation
• 100 000 mating cyclesØ 2,5
27,7
3,0
2,55,8
Adapters
Concept
1 = Input
2 = Output internal antenna
3 = Output external antenna
Side view
Electrical characteristics Un-switched Switched(Adapter 3725-Type)
Impedance 50 Ω
Operating frequency DC...3 GHz
Return loss <_ 1,0 GHz <_ 2,0 GHz <_ 3,0 GHz
> 30 dB > 27 dB > 25 dB
> 23 dB > 18 dB > 16 dB
Isolation <_ 1,0 GHz <_ 2,0 GHz <_ 3,0 GHz
> 23 dB > 17 dB > 13 dB
Insertion loss <_ 1,0 GHz <_ 2,0 GHz <_ 3,0 GHz
< 0,10 dB < 0,15 dB < 0,20 dB
< 0,10 dB < 0,20 dB < 0,30 dB
Contact resistance Center contact max. initial Outer contact max. initial
100 mΩ 125 mΩ
100 mΩ 125 mΩ
Insulation resistance 1 000 MΩ
Operation voltage AC/DC 100 V
Proof voltage 150 V
Mechanical characteristics
Engagement force max. 12 N
Separating force max. 12 N
Mating cycles min. 5 000
Contact pressure force (switch) min. 0,50 N typ. 0,50 N
Material
Housing bronze
Switching spring stainless steel
Contact spring bronze
Insulator PA46
Plating
Housing Ni + 0,2 µm AU
Switching spring Ni + 0,5 µm AU
Contact spring Ni + 0,5 µm AU
Handling information
Tape & reel
Pick & place
Lead-free soldering
(All electrical and mechanical characteristics are valid for the combination 3724.99.0030.001 and 3725.91.8910.102)
3724 3798
3 3
2 11
plug plug
2
3724
11
2
Top view3798
2
1
Head office GermanyIMS Connector Systems GmbHObere Hauptstraße 30D-79843 LöffingenTel (+49) 76 54 90 10Fax (+49) 76 54 90 11 99Net www.imscs.comE-mail [email protected]
Sales office ChinaIMS Connector Systems LtdNo 35, Huo Ju RoadSND Science & Technology ParkVCR-Suzhou 215011Tel (+86) 512 6 808 18 16Fax (+86) 512 6 825 23 88E-mail [email protected]
Sales office FranceIMS Connector Systems36, route de la Chapelle sur ErdreF-44300 NantesTel (+33) 2 51 84 24 24Fax (+33) 2 51 84 24 25E-mail [email protected]
Your global
connection
Optimised for modern manufacturing demands
Alt
erat
ions
res
erve
d –
Pri
nted
in
Ger
man
y 6
com
-a-t
ec.c
om 0
07
4-0
3-T
odt
Sales office Northern EuropeIMS Connector Systems ApSFredtoftevej 15 ADK-2980 KokkedalTel (+45) 45 16 09 10Fax (+45) 45 16 09 16E-mail [email protected]
Sales office United KingdomIMS Connector Systems (UK) LtdUnit B3 (1st floor), Cumberland Business Centre Northumberland Road, PortsmouthGB-Hants PO5 1DSTel (+44) 239275 0011Fax (+45) 239275 0022E-mail [email protected]
Sales office USAIMS Connector Systems1400 Waters Ridge DriveLewisville TX 75057Tel (+1) 972 219 1240Fax (+1) 972 436 7141Net www.imscsusa.comE-mail [email protected]
The connectors are delivered on tape and reel packing which meets the requirements of pick and place machines (IEC 286-3: EIA 481).
One of the world’s smallest angle switchesRight angle SMD antenna switchSample-kit AGK-3888
Consisting of 3724 – SMD antenna switch 3798 – SMD antenna switch (reversible polarity) 3725 – Manual testing adapter with SMA interface 3726 – Automatic testing adapter with SMA interface 3857 – Antenna connector K-2082 – Test cable assembly AGK-3882 – Circuit board for testing
Tptp
tLTsmax
Tsmin
t 25° C to Peak
tsPreheat
Ramp-up
Ramp-clown
Critical ZoneTL to Tp
Tem
pera
ture
Time
TL
25
Solder pad layout proposal Soldering surface
Recommended soldering profile IPC/JEDEC J-STD-020CPb-Free Assembly260° C max. Temperature
Your global
connection
Alt
erat
ions
res
erve
d –
Pri
nted
in
Ger
man
y 6
com
-a-t
ec.c
om 0
07
4-1
0-T
odt
Head officeGermany IMS Connector Systems GmbHObere Hauptstraße 30D-79843 LöffingenTel (+49) 76 54 90 10Fax (+49) 76 54 90 11 99Net www.imscs.comE-mail [email protected]
Sales officesEurope
Northern EuropeIMS Connector Systems ApSFredtoftevej 15 ADK-2980 KokkedalTel (+45) 45 16 09 10Fax (+45) 45 16 09 16E-mail [email protected]
United KingdomIMS Connector Systems (UK) LtdUnit B3 (1st floor), Cumberland Business Centre Northumberland Road, PortsmouthGB-Hants PO5 1DSTel (+44) 239275 0011Fax (+45) 239275 0022E-mail [email protected]
Asia and Pacific
ChinaIMS Connector Systems LtdNo 35, Huo Ju RoadSND Science & Technology ParkVCR-Suzhou 215011Tel (+86) 512 6 808 18 16Fax (+86) 512 6 825 23 88E-mail [email protected]
North America
USAIMS Connector Systems401 E. Corporate Drive, Suite # 100Lewisville TX 75067Tel (+1) 469 948 4885Fax (+1) 469 948 4881E-mail [email protected]