OptiLine Mini-trunking Safe and smoothly shaped – and a joy to work with.

OptiLine Mini-trunking

Safe and smoothly shaped – and a joy to work with

Schneider Electric 2- LSB03225 - May 2014


●Wide range●Safe and fast to install●Robust and versatile●PVC and halogen-free PC/ABS●Aluminium●IP40●Tamper-proof●Impact-resistant


Attractive and functional for all environments


More than 40 years’ experience of designing trunking for electricalinstallations:● Easy to install● Maximum “buildability”● Tamper-proof● Modern design

Many unique functions

Trunking base and cover same width − good in corners

Secure snap-function – can only be opened with tools

Locking gives a high degree of protection

Rounded shape – soft impression, more space inside

Sturdy material gives high electrical safety.

Trunking base and cover are both U-shaped. This increases stability and makes for easier handling.

Concealed joints and high surface finish make cleaning easier

Break line for removal of plastic cable shelf


●The range includes three sizes equipped with an integrated cable retaining function

●The flexible “wings” prevent cables from falling out during installation

Integrated cable retaining function


Single- or multiple compartment – for both power and data

●Mixed installations●Power and low voltage wiring in the same multi-compartment

trunking●Easy to run long feeds

OptiLine mini-trunking is available in 1-, 2- and 3-compartment versions


● Thanks to its sealed, stable design, OptiLine mini-trunking achieves degree of protection IP40. This makes OptiLine mini-trunking suitable for installation both outdoors and indoors.

● Both the plastic and the aluminium trunking offer many years of resistance to UV radiation, heat and cold.

● The plastic trunking is also approved for single-insulated wire outdoors.

Both outdoors and indoors


Environment-friendly

●OptiLine mini-trunking is available in three materials; aluminium, lead and cadmium-free PVC or halogen-free plastic (PC/ABS).

●Accessories, like corners and end pieces, are made of halogen-free plastic (PC/ABS).


Highly impact-resistant

●All mini-trunking is highly impact-resistant, thanks to its design and generous material thickness.

●The aluminium version of OptiLine offers extra strong impact-resistance. In many cases, this is a secure substitute for unattractive sheet steel protection.


Cable separation

● A unique feature of OptiLine mini-trunking is the cable separation at junctions in two- and three-compartment trunking.

●The flyover can easily be adapted to keep power and low voltage wiring separate.

●The cable holder (an accessory) keeps the cables in place during installation.


Easy to cut

● The trunking and the partition walls can be hand with simple tools

● Accessories like corners, bends and joint cover pieces are very forgiving and hide all bad cuts.


Tamper-proof

●The trunking and all its accessories use snap fitting for quick, simple installation. To remove the cover and accessories without the right tools is far more difficult.

●This is a design feature that protects the installation from tampering, especially recommended in public areas or for fibre optic and broadband cables.


Screws or adhesive tape

●All OptiLine mini-trunking has pre-punched holes at frequent intervals to make installation easier.

●For installations without power wiring, there is also OptiLine mini-trunking with adhesive tape fixing. On suitable surfaces, the speed of this method of installation is unsurpassed.


A complete mini-trunking system1. Base profile2. Cover3. T-piece4. Stop end5. Branching piece6. Internal corner7. Joint cover piece8. External corner9. Bend 90°10. Flyover

1

2

34

56

78

9

10


Material, design and dimensions

* Also available with bonding tape

12x20 12x30 12x30 15x35 15x35

*Aluminium PVC PC/ABS *

**PVC

** With integrated cable retaining function

PVC **PVC PVC


Material, design and dimensions

* Also available with bonding tape

18x20 18x35 18x45 18x45 25x60

*Aluminium PVC

AluminiumPVC PVC PVC

PC/ABSPC/ABS PC/ABS *

** With integrated cable retaining function

**PVC


System componentsMini-trunking

T-piece

Joint cover piece

Internal corner

Bend 90°

Branching piece

External corner

Stop end

Fly-over

Cable clamps

Dedicated fixings

Cutting shears


• Smoothly shaped• Safe• Flexible

OptiLine Mini-trunking Safe and smoothly shaped – and a joy to work with.

Documents

Transcript of OptiLine Mini-trunking Safe and smoothly shaped – and a joy to work with.