OPTI-Solar Life-Blending Smart Energy Solution · ©2018 OPTI International Corporation. Names and...
Transcript of OPTI-Solar Life-Blending Smart Energy Solution · ©2018 OPTI International Corporation. Names and...
w w w . o p t i - s o l a r . c o m
©2018 OPTI International Corporation. Names and trademarks herein are the property of their respective companies.
Tel: +886-2-2246-7272Fax: +886-2-2246-7312mail: [email protected]
OPTI-Solar USA:Tel: Tel: +1-909-869-5700Fax: +1-909-869-5730
It's who we are from the embracement of Mother Earth
Link Energy to a Better life
OPTI-Solar Life-BlendingSmart Energy Solution
OPTI-Solar SENA:Tel: +39 389 842847Fax: +39 011 19785932
OPTI-Solar Middle East:Tel: +9714-8819-838Fax: +9714-8819-938
Solar InverterSP1000 ~ SP5000 Initial-P/-M
SP3000 / 5000 Handy
SP5000 Efecto/Brilliant Plus/Brilliant Ultra
SP4000 / SP10000 Premium
SP3000 Power-M
SP5000 Vitality
SP5000 Vitality Eco
SP1000 Senior
SP300 / SP600 Junior
SP7000 / SP10000 Revival
SP1600 AVR~ SP4000 AVR
Solar ModuleOM6PV300
I N V E R T E R P W E R
OPTI-UPSEstablished in 1991
Renowned supplier of Uninterruptible Power Supply (UPS)
OPTI-SOLAREstablished in 2007
Total Solution Provider and Inverter Expert
5
6
7
8
10
11
12
13
14
15
16
17
Contents
1
Solar Contents
Battery• Energy storage
CloudLOG• Operation monitoring• Support Android and iOS• Connect up to 12 inverters• Share data with others
Solar Panel• Standard anodized black and silver
aluminum frame.• Modules with 60 solar cells
connection in series.• Strict Power measurement
minimizes the power tolerance to +0- 4.99W
Circuit Breaker• For PV• For AC input / AC output• For Big Load (e.g. Air
conditioning, Refrigerator)• For Load• For Battery
Public Grid SP5000 Vitality Eco• On-Grid inverter with energy storage
• 96% High Efficiency• 200% Overload• Parallel Operations
SP5000 Brilliant Plus• Pure sine wave inverter• Built-in 2 or 3 strings of MPPT solar
charge controller• Enhance AC charger up to 60A
Battery• Energy storage
Circuit Breaker• For PV• For AC input / AC output• For Big Load (e.g. Air
conditioning, Refrigerator)• For Load• For Battery
Public Grid
SNMP Box
Solar Panel• Standard anodized black and silver
aluminum frame.• Modules with 60 solar cells
connection in series.• Strict Power measurement
minimizes the power tolerance to +0- 4.99W
OPTI-Solar Smart Energy Solution Overview
Solar Energy
3
Solar Energy
2
Battery• Energy storage
CloudLOG• Operation monitoring• Support Android and iOS• Connect up to 12 inverters• Share data with others
Solar Panel• Standard anodized black and silver
aluminum frame.• Modules with 60 solar cells
connection in series.• Strict Power measurement
minimizes the power tolerance to +0- 4.99W
Circuit Breaker• For PV• For AC input / AC output• For Big Load (e.g. Air
conditioning, Refrigerator)• For Load• For Battery
Public Grid SP5000 Vitality Eco• On-Grid inverter with energy storage
• 96% High Efficiency• 200% Overload• Parallel Operations
SP5000 Brilliant Plus• Pure sine wave inverter• Built-in 2 or 3 strings of MPPT solar
charge controller• Enhance AC charger up to 60A
Battery• Energy storage
Circuit Breaker• For PV• For AC input / AC output• For Big Load (e.g. Air
conditioning, Refrigerator)• For Load• For Battery
Public Grid
SNMP Box
Solar Panel• Standard anodized black and silver
aluminum frame.• Modules with 60 solar cells
connection in series.• Strict Power measurement
minimizes the power tolerance to +0- 4.99W
OPTI-Solar Smart Energy Solution Overview
Solar Energy
3
Solar Energy
2
Our confidence in superior quality and more than 20 years of solid achievements have satisfied customers worldwide.
Inspections, auto-error detection, correction and extensive tests are continuously lead on our assembly systems.
Prompt services in consultation, configuration, maintenance and repair.
Technical seminars to benefit our partners.
History of A Trustworthy Brand
Key value for our partners & customers
ISO 9001 CERTIFICATE
SP Initial SeriesSP InitialKeep high value with economy, SP Initial Series allow you easily to use solar energy.
User friendly, high-efficiency and reliable
Enjoy the green life
Features
• Pure sine wave inverter with PF1
• Selectable high power charging current
• Compatible to mains voltage or generator power
• Smart battery charger design for optimized battery performance
• Built-in solar charge controller
• Overload and short circuit protection
• Smart battery charger design for optimized battery performance
• Cold start function
• USB communication port
Specifications
SP3000~SP5000 Initial-P/M
SP1000~SP2000 Initial-PSP1000~SP2000 Initial-P
Specifications are subject to change without notice.
MODEL SP 1000 Initial-P
SP 2000 Initial-P
SP 3000 Initial-P
SP 5000 Initial-P
SP 3000 Initial-M
SP 5000 Initial-M
Rated Power 1000VA/ 1000W
2000VA/ 2000W
3000VA/ 3000W
5000VA/ 5000W
3000VA/ 3000W
5000VA/ 5000W
INPUT
Voltage 230 VAC
Selectable Voltage Range
170-280 VAC (For Personal Computers)
90-280 VAC (For Home Appliances)
Frequency Range 50 Hz/60 Hz (Auto sensing)
OUTPUT
AC Voltage Regulation (Batt. Mode) 230VAC ± 5%
Surge Power
Peak Efficiency
2000VA 4000VA 4000VA 10000VA 4000VA 10000VA
93%
Transfer Time10 ms (For Personal Computers)
20 ms (For Home Appliances)
Waveform Pure sine wave
BATTERY
Battery Voltage 12 VDC 24 VDC 48 VDC 24 VDC 48 VDC
Floating Charge Voltage 13.5 VDC 27 VDC 54 VDC 27 VDC 54 VDC
Overcharge Protection 16 VDC 33 VDC 63 VDC 33 VDC 63 VDC
SOLAR CHARGER & AC CHARGERPV Maximum Input power 600W 1200W 1200W 2500W 1000W 3000W
Maximum PV Array Open Circuit Voltage 50VDC 60VDC 105Vdc 100VDC 145Vdc
Operation Voltage Range 18~20Vdc 30~32Vdc 60~72Vdc N/A N/A
PV Array MPPT Voltage Range N/A N/A N/A 30~80Vdc 60~115Vdc
Maximum Solar Charging Current 50A 40A 60A
Maximum AC Charging Current 20A 25A 60A 25A 60A
Maximum Charging Current 50A 70A 110A 60A 120A
PHYSICAL
Dimension (D×W×H) 88×225×315 mm 100×285× 334 mm
100×300× 440 mm
100×285× 334 mm
100×300× 440 mm
Net Weight 5kgs 5.5kgs 6.5kgs 9kgs 6.3kgs 9.7kgs
OPERATING ENVIRONMENT
Humidity 5% to 95% Relative Humidity(Non-condensing)
Operating Temperature -10°C ~ 55°C
Storage Temperature -15°C ~ 60°C
Solar Milestones
4
Solar Inverter
5
Our confidence in superior quality and more than 20 years of solid achievements have satisfied customers worldwide.
Inspections, auto-error detection, correction and extensive tests are continuously lead on our assembly systems.
Prompt services in consultation, configuration, maintenance and repair.
Technical seminars to benefit our partners.
History of A Trustworthy Brand
Key value for our partners & customers
ISO 9001 CERTIFICATE
SP Initial SeriesSP InitialKeep high value with economy, SP Initial Series allow you easily to use solar energy.
User friendly, high-efficiency and reliable
Enjoy the green life
Features
• Pure sine wave inverter with PF1
• Selectable high power charging current
• Compatible to mains voltage or generator power
• Smart battery charger design for optimized battery performance
• Built-in solar charge controller
• Overload and short circuit protection
• Smart battery charger design for optimized battery performance
• Cold start function
• USB communication port
Specifications
SP3000~SP5000 Initial-P/M
SP1000~SP2000 Initial-PSP1000~SP2000 Initial-P
Specifications are subject to change without notice.
MODEL SP 1000 Initial-P
SP 2000 Initial-P
SP 3000 Initial-P
SP 5000 Initial-P
SP 3000 Initial-M
SP 5000 Initial-M
Rated Power 1000VA/ 1000W
2000VA/ 2000W
3000VA/ 3000W
5000VA/ 5000W
3000VA/ 3000W
5000VA/ 5000W
INPUT
Voltage 230 VAC
Selectable Voltage Range
170-280 VAC (For Personal Computers)
90-280 VAC (For Home Appliances)
Frequency Range 50 Hz/60 Hz (Auto sensing)
OUTPUT
AC Voltage Regulation (Batt. Mode) 230VAC ± 5%
Surge Power
Peak Efficiency
2000VA 4000VA 4000VA 10000VA 4000VA 10000VA
93%
Transfer Time10 ms (For Personal Computers)
20 ms (For Home Appliances)
Waveform Pure sine wave
BATTERY
Battery Voltage 12 VDC 24 VDC 48 VDC 24 VDC 48 VDC
Floating Charge Voltage 13.5 VDC 27 VDC 54 VDC 27 VDC 54 VDC
Overcharge Protection 16 VDC 33 VDC 63 VDC 33 VDC 63 VDC
SOLAR CHARGER & AC CHARGERPV Maximum Input power 600W 1200W 1200W 2500W 1000W 3000W
Maximum PV Array Open Circuit Voltage 50VDC 60VDC 105Vdc 100VDC 145Vdc
Operation Voltage Range 18~20Vdc 30~32Vdc 60~72Vdc N/A N/A
PV Array MPPT Voltage Range N/A N/A N/A 30~80Vdc 60~115Vdc
Maximum Solar Charging Current 50A 40A 60A
Maximum AC Charging Current 20A 25A 60A 25A 60A
Maximum Charging Current 50A 70A 110A 60A 120A
PHYSICAL
Dimension (D×W×H) 88×225×315 mm 100×285× 334 mm
100×300× 440 mm
100×285× 334 mm
100×300× 440 mm
Net Weight 5kgs 5.5kgs 6.5kgs 9kgs 6.3kgs 9.7kgs
OPERATING ENVIRONMENT
Humidity 5% to 95% Relative Humidity(Non-condensing)
Operating Temperature -10°C ~ 55°C
Storage Temperature -15°C ~ 60°C
Solar Milestones
4
Solar Inverter
5
SP3000 ~ 5000 Handy
SP Handy SeriesSP Handy
Specifications are subject to change without notices.
Operation Diagram:
Mighty Solar Inverter with user-friendly, advanced & energy-exchange functions
Operation without battery & High PV input voltage
Installers are smiling !!
The Anti-Dust-Filter design can realistically raise the life-span.
Features• Pure sine wave inverter with PF1• High PV input range• Feasible for without-battery operation• Selectable high power charging current• Compatible to mains voltage or generator power• Smart battery charger design for optimized battery
performance• Built-in solar charge controller• Overload and short circuit protection• Smart battery charger design for optimized battery
performance• Cold start function• The Anti-Dust-Filter design can realistically raise the
life-span
Specifications
Specifications are subject to change without notice.* All SP5000 Efecto/Brilliant Series can be installed in parallel with maximum up to 9 units, and total capacity can reach 45KVA (Transfer time is 30ms in parallel operation)
SP Efecto/Brilliant SeriesSP Efecto/Brilliant
Features• Pure sine wave inverter• Built-in solar charger: PWM/MPPT• Selectable input voltage range for home appliances
and personal computers• Selectable charging current based on applications• Configurable AC/Solar input priority• Compatible to mains voltage or generator power• Auto restart as AC recovers• Overload and short circuit protection• Smart battery charger design for optimized battery
performance• Cold start function• Parallel application (optional)• Operation without battery (Brilliant Ultra only)
SP Efecto/Brilliant Series provide the integration of friendly PV energy
The PV maximum charging current will reach up to 80A or 120A.
Enjoy more solar energy with a simply solution.
Specifications
MODEL SP5000 Efecto SP5000 Brilliant SP5000 Brilliant Plus
SP5000 Brilliant Ultra
Rated Power 5000VA/5000WINPUTVoltage 230 VACSelectable Voltage Range
170-280 VAC (For Personal Computers)90-280 VAC (For Home Appliances)
Frequency Range 50 Hz/60 Hz (Auto sensing)OUTPUTAC Voltage Regulation (Batt. Mode) 230VAC ± 5%
Surge PowerPeak Efficiency
10000VA93% 90%
Transfer Time10 ms (For Personal Computers)
20 ms (For Home Appliances)Waveform Pure sine wave
Overload Capacity10s for 110%~150% load
5s for ≥150% loadBATTERYBattery Voltage 48 VDCFloating Charge Voltage 54 VDC (maximum 58Vdc)
Low Battery Alarm Voltage 42 VDC
Shutdown Voltage 40 VDCOvercharge Protection 60 VDC (maximum 66 VDC)Reverse Polarity Protection Yes
SOLAR CHARGER & AC CHARGERPV Maximum Input power 2500W 4000W 6000W 4500W
Maximum PV Array Open Circuit Voltage 100Vdc 145Vdc 450Vdc
Operation Voltage Range 60~90Vdc N/A
PV Array MPPT Voltage Range N/A 60~115Vdc 120~430Vdc
Maximum Solar Charging Current 50A 80A 120A 80A
Maximum AC Charging Current 60 A 80 A
Maximum Charging Current 110A 140A 180A 80A
PHYSICAL
Dimension (D×W×H) 110 x 300 x 455mm
120 x 295 x 468mm
186 x 295 x 507mm
120 x 295 x 468mm
Net Weight 8.5kgs 11kgs 16kgs 11kgsOPERATING ENVIRONMENTHumidity 5% to 95% Relative Humidity(Non-condensing)Operating Temperature 0°C - 55°C
Storage Temperature -15°C - 60°C
MODEL SP 3000Handy SP 5000HandyRated Power 3000VA/3000W 5000VA/5000WINPUTVoltage 230 VAC
Selectable Voltage Range170-280 VAC (For Personal Computers)
90-280 VAC (For Home Appliances)Frequency Range 50 Hz/60 Hz (Auto sensing)OUTPUTAC Voltage Regulation (Batt. Mode) 230VAC ± 5%
Surge PowerPeak Efficiency
6000VA 10000VA93%
Transfer Time10 ms (For Personal Computers)
20 ms (For Home Appliances)Waveform Pure sine waveBATTERYBattery Voltage 24 VDC 48 VDCFloating Charge Voltage 27 VDC 54 VDCOvercharge Protection 33 VDC 63 VDCSOLAR CHARGER & AC CHARGERPV Maximum Input power 4000W 5000WMaximum PV Array Open Circuit Voltage 500Vdc
PV Array MPPT Voltage Range 120~450Vdc
Maximum Solar Charging Current 80A
Maximum AC Charging Current 60A
Maximum Charging Current 80A
PHYSICALDimension (D×W×H) 100 x 300 x 440mmNet Weight 9kgs 10kgsOPERATING ENVIRONMENT
Humidity 5% to 95% Relative Humidity (Non-condensing)
Operating Temperature -10°C ~ 55°CStorage Temperature -15°C ~ 60°C
Solar Inverter
6
Solar Inverter
7
SP5000 Efecto/Brilliant Plus/Brilliant Ultra
Specifications are subject to change without notice.* All SP5000 Efecto/Brilliant Series can be installed in parallel with maximum up to 9 units, and total capacity can reach 45KVA (Transfer time is 30ms in parallel operation)
SP Efecto/Brilliant SeriesSP Efecto/Brilliant
Features• Pure sine wave inverter• Built-in solar charger: PWM/MPPT• Selectable input voltage range for home appliances
and personal computers• Selectable charging current based on applications• Configurable AC/Solar input priority• Compatible to mains voltage or generator power• Auto restart as AC recovers• Overload and short circuit protection• Smart battery charger design for optimized battery
performance• Cold start function• Parallel application (optional)• Operation without battery (Brilliant Ultra only)
SP Efecto/Brilliant Series provide the integration of friendly PV energy
The PV maximum charging current will reach up to 80A or 120A.
Enjoy more solar energy with a simply solution.
SpecificationsMODEL SP5000 Efecto SP5000 Brilliant Plus SP5000 Brilliant UltraRated Power 5000VA/5000WINPUTVoltage 230 VACSelectable Voltage Range
170-280 VAC (For Personal Computers)90-280 VAC (For Home Appliances)
Frequency Range 50 Hz/60 Hz (Auto sensing)OUTPUTAC Voltage Regulation (Batt. Mode) 230VAC ± 5%
Surge PowerPeak Efficiency
10000VA93% 90%
Transfer Time10 ms (For Personal Computers)
20 ms (For Home Appliances)Waveform Pure sine wave
Overload Capacity10s for 110%~150% load
5s for ≥150% loadBATTERYBattery Voltage 48 VDCFloating Charge Voltage 54 VDC (maximum 58Vdc)
Low Battery Alarm Voltage 42 VDC
Shutdown Voltage 40 VDCOvercharge Protection 60 VDC (maximum 66 VDC)Reverse Polarity Protection Yes
SOLAR CHARGER & AC CHARGERPV Maximum Input power 2500W 6000W 4500W
Maximum PV Array Open Circuit Voltage 100Vdc 145Vdc 450Vdc
Operation Voltage Range 60~90Vdc N/A
PV Array MPPT Voltage Range N/A 60~115Vdc 120~430Vdc
Maximum Solar Charging Current 50A 120A 80A
Maximum AC Charging Current 60 A 80 A
Maximum Charging Current 110A 180A 80A
PHYSICALDimension (D×W×H) 110 x 300 x 455mm 186 x 295 x 507mm 120 x 295 x 468mmNet Weight 8.5kgs 16kgs 11kgsOPERATING ENVIRONMENTHumidity 5% to 95% Relative Humidity(Non-condensing)Operating Temperature 0°C - 55°C
Storage Temperature -15°C - 60°C
Solar Inverter
7
SP4000 / SP10000 Premium
SP Premium SeriesSP PremiumTrue Hybrid Solar Inverter with Energy Storage
Features• 4KW/10KW on-grid inverter with energy storage• Pure sine wave output• Microprocessor controlled to guarantee stable charging system• Multiple operations: Grid tie, Off grid, and grid-tie with backup• Built-in MPPT solar charger• LCD display panel for comprehensive information• Multiple communication• Green substitution for generators• User-adjustable battery charging current• Parallel connection capability (Maximum up to 6pcs)
SP Premium Series are a universal power supply tool for houses. It utilizes solar power at day time feeding it to your appliances like illumination lamps, TV, stereo and PC equipment, saving the power to the batteries for the night time usage, and selling the power surplus unused by the connected appliances to the grid.
On cloudy days when the solar power is weak, SP Premium Series take the lacking power from the grid. At night, the power stored in the batteries are being used for your equipment. With this true hybrid design, we give you the confidence that 100% of your solar power is fully utilized.
Operation Diagram:
Specifications
Product specifications are subject to change without further notice.*These figures are based on VDE-4105 standard. All figures may vary depending on different AC voltage and country requirements.**Power derating 1% every 100m when altitude is over 1000m.
MODEL SP4000 PremiumRATED POWER 4000WPV INPUT (DC)Maximum DC Power 5000 WNominal DC Voltage 360 VDCMaximum DC Voltage 580 VDCStart-up Voltage / Initial Feeding Voltage 116 VDC / 150 VDCMPP Voltage Range 120 VDC ~ 500 VDC Maximum Input Current 18 AIsc PV (absolute maximum) 25 AMax. inverter back feed current to the array 0 AGRID OUTPUT (AC)Nominal Output Voltage 230 VAC Output Voltage Range 184 - 264.5 VAC*Output Frequency Range 47.5 ~ 51.5 Hz or 59.3~ 60.5HzNominal Output Current 17.4 A Inrush Current/Duration 17.4 A / 20msMaximum Output Fault Current/Duration 52 A / 1msMaximum output Overcurrent Protection 52 A Power Factor Range 0.9 lead – 0.9 lagAC INPUTAC Start-up Voltage 120-140 VAC Auto Restart Voltage 180 VAC Acceptable Input Voltage Range 170 - 280 VAC Nominal Frequency 50 Hz / 60 HzAC Input Power 4000VA/4000WMaximum AC Input Current 40 AInrush Input Current 40 A / 1msBATTERY MODE OUTPUT (AC)Nominal Output Voltage 230 VAC Output Frequency 50 Hz / 60 Hz (auto sensing)Output Waveform Pure sine waveOutput Power 4000VA/4000WOutput CurrentEfficiency (DC to AC)
17.4A91%
BATTERY & CHARGERPV Maximum Input power 5000WNominal DC Voltage 48 VDCMaximum Battery Discharging Current 110AMaximum Charging Current 80 APHYSICALDimension (D× W×H) 117×438×535mmNet Weight 16.2kgsINTERACECommunication Port USB/ Dry contact
Intelligent Slot Optional SNMP, Modbus and AS-400 cards available
ENVIRONMENTProtective Class IIngress Protection Rating IP20Humidity 0 ~ 90% RH (No condensing)Operating Temperature -10 to 55°CAltitude MAX. 2000 m*
MODEL SP10000 Premium RATED POWER 10000 W PV INPUT (DC) Maximum DC Power 14850 W Nominal DC Voltage 720 VDC Maximum DC Voltage 900 VDC Start-up Voltage / Initial Feeding Voltage 320 VDC / 350 VDC MPP Voltage Range 400 VDC ~ 800 VDC Maximum Input Current 2×18.6 A GRID OUTPUT (AC) Nominal Output Voltage 230 VAC (P-N) / 400 VAC (P-P) Output Voltage Range 184 - 265 VAC per phase*Nominal Output Current 13 A per phase Inrush Current/Duration 17 A per phase / 20ms Maximum Output Fault Current/Duration 51 A per phase / 1ms Maximum output Overcurrent Protection 51 A per phase Power Factor
Maximum Conversion Efficiency (DC/AC)European Efficiency@Vnominal
>0.99EFFICIENCY
96%95%
AC INPUT AC Start-up Voltage 120-140 VAC per phase Auto Restart Voltage 180 VAC per phase Acceptable Input Voltage Range 170 - 280 VAC per phase Nominal Frequency 50 Hz / 60 Hz AC Input Power 10000VA/10000W Maximum AC Input Current 25 A Inrush Input Current 25 A BATTERY MODE OUTPUT (AC) Nominal Output Voltage 230 VAC (P-N) / 400 VAC (P-P) Output Frequency 50 Hz / 60 Hz (auto sensing) Output Waveform Pure sine wave Output Power 10000VA/10000W Output Current 13 A per phase
91%BATTERY & CHARGER PV Maximum Input power 14850WNominal DC Voltage 48 VDC Maximum Battery Discharging Current 250 A Maximum Charging Current 200 A PHYSICAL Dimension (D×W×H) 622×500×167.2mmNet Weight 45kgsINTERACE Communication Port RS-232/USB
Intelligent Slot Optional SNMP, Modbus and AS-400 cards available
ENVIRONMENT Protective Class I Ingress Protection Rating IP20 Humidity 0 ~ 90% RH (No condensing) Operating Temperature 0 to 40°C Altitude 0 ~ 1000 m**
Efficiency (DC to AC)
Solar Inverter
8
Solar Inverter
9
SP4000 / SP10000 Premium
SP Premium SeriesSP PremiumTrue Hybrid Solar Inverter with Energy Storage
Features• 4KW/10KW on-grid inverter with energy storage• Pure sine wave output• Microprocessor controlled to guarantee stable charging system• Multiple operations: Grid tie, Off grid, and grid-tie with backup• Built-in MPPT solar charger• LCD display panel for comprehensive information• Multiple communication• Green substitution for generators• User-adjustable battery charging current• Parallel connection capability (Maximum up to 6pcs)
SP Premium Series are a universal power supply tool for houses. It utilizes solar power at day time feeding it to your appliances like illumination lamps, TV, stereo and PC equipment, saving the power to the batteries for the night time usage, and selling the power surplus unused by the connected appliances to the grid.
On cloudy days when the solar power is weak, SP Premium Series take the lacking power from the grid. At night, the power stored in the batteries are being used for your equipment. With this true hybrid design, we give you the confidence that 100% of your solar power is fully utilized.
Operation Diagram:
Specifications
Product specifications are subject to change without further notice.*These figures are based on VDE-4105 standard. All figures may vary depending on different AC voltage and country requirements.**Power derating 1% every 100m when altitude is over 1000m.
MODEL SP4000 PremiumRATED POWER 4000WPV INPUT (DC)Maximum DC Power 5000 WNominal DC Voltage 360 VDCMaximum DC Voltage 580 VDCStart-up Voltage / Initial Feeding Voltage 116 VDC / 150 VDCMPP Voltage Range 120 VDC ~ 500 VDC Maximum Input Current 18 AIsc PV (absolute maximum) 25 AMax. inverter back feed current to the array 0 AGRID OUTPUT (AC)Nominal Output Voltage 230 VAC Output Voltage Range 184 - 264.5 VAC*Output Frequency Range 47.5 ~ 51.5 Hz or 59.3~ 60.5HzNominal Output Current 17.4 A Inrush Current/Duration 17.4 A / 20msMaximum Output Fault Current/Duration 52 A / 1msMaximum output Overcurrent Protection 52 A Power Factor Range 0.9 lead – 0.9 lagAC INPUTAC Start-up Voltage 120-140 VAC Auto Restart Voltage 180 VAC Acceptable Input Voltage Range 170 - 280 VAC Nominal Frequency 50 Hz / 60 HzAC Input Power 4000VA/4000WMaximum AC Input Current 40 AInrush Input Current 40 A / 1msBATTERY MODE OUTPUT (AC)Nominal Output Voltage 230 VAC Output Frequency 50 Hz / 60 Hz (auto sensing)Output Waveform Pure sine waveOutput Power 4000VA/4000WOutput CurrentEfficiency (DC to AC)
17.4A91%
BATTERY & CHARGERPV Maximum Input power 5000WNominal DC Voltage 48 VDCMaximum Battery Discharging Current 110AMaximum Charging Current 80 APHYSICALDimension (D× W×H) 117×438×535mmNet Weight 16.2kgsINTERACECommunication Port USB/ Dry contact
Intelligent Slot Optional SNMP, Modbus and AS-400 cards available
ENVIRONMENTProtective Class IIngress Protection Rating IP20Humidity 0 ~ 90% RH (No condensing)Operating Temperature -10 to 55°CAltitude MAX. 2000 m*
MODEL SP10000 Premium RATED POWER 10000 W PV INPUT (DC) Maximum DC Power 14850 W Nominal DC Voltage 720 VDC Maximum DC Voltage 900 VDC Start-up Voltage / Initial Feeding Voltage 320 VDC / 350 VDC MPP Voltage Range 400 VDC ~ 800 VDC Maximum Input Current 2×18.6 A GRID OUTPUT (AC) Nominal Output Voltage 230 VAC (P-N) / 400 VAC (P-P) Output Voltage Range 184 - 265 VAC per phase*Nominal Output Current 13 A per phase Inrush Current/Duration 17 A per phase / 20ms Maximum Output Fault Current/Duration 51 A per phase / 1ms Maximum output Overcurrent Protection 51 A per phase Power Factor
Maximum Conversion Efficiency (DC/AC)European Efficiency@Vnominal
>0.99EFFICIENCY
96%95%
AC INPUT AC Start-up Voltage 120-140 VAC per phase Auto Restart Voltage 180 VAC per phase Acceptable Input Voltage Range 170 - 280 VAC per phase Nominal Frequency 50 Hz / 60 Hz AC Input Power 10000VA/10000W Maximum AC Input Current 25 A Inrush Input Current 25 A BATTERY MODE OUTPUT (AC) Nominal Output Voltage 230 VAC (P-N) / 400 VAC (P-P) Output Frequency 50 Hz / 60 Hz (auto sensing) Output Waveform Pure sine wave Output Power 10000VA/10000W Output Current 13 A per phase
91%BATTERY & CHARGER PV Maximum Input power 14850WNominal DC Voltage 48 VDC Maximum Battery Discharging Current 250 A Maximum Charging Current 200 A PHYSICAL Dimension (D×W×H) 167.2×500×622mmNet Weight 45kgsINTERACE Communication Port RS-232/USB
Intelligent Slot Optional SNMP, Modbus and AS-400 cards available
ENVIRONMENT Protective Class I Ingress Protection Rating IP20 Humidity 0 ~ 90% RH (No condensing) Operating Temperature 0 to 40°C Altitude 0 ~ 1000 m**
Efficiency (DC to AC)
Solar Inverter
8
Solar Inverter
9
SP Vitality
Specifications
Specifications are subject to change without notice.
MODEL SP5000 VitalityRated Power 5000WINPUTRated Voltage 230 VACVoltage Range 190-300 VACFrequency Range 50 Hz/60 Hz (Auto sensing)OUTPUTAC Voltage Regulation (Batt. Mode) 230VAC ± 5%
Overload Capacity60 seconds for 100% ≤ load ≤ 110% 30 seconds for 110% < load ≤ 150% 10 seconds for 150% < load ≤ 200%
96.5%Transfer TimePeak Efficiency
20msWaveform Pure sine waveBATTERYBattery Voltage 48 VDCVoltage Range 40VDC~56VDCLow Battery Alarm Voltage 42 VDCMaximum discharge Current 150AMaximum Utility Charging Current 50 A SOLAR CHARGERMaximum PV Rated Power 6000WMaximum PV Array Open Circuit Voltage 500VDCMPPT Operation Voltage Range 150~450VDCStart-up Voltage 150VDCMaximum input Current 10A× 2Maximum Charging Current 100AStandby Power Consumption 60WJOINT UTILITY AND SOLAR CHARGINGMaximum Charging Current 100APHYSICALDimension (D×W×H) 580×408×168mmNet Weight 24.2kgsOPERATING ENVIRONMENTHumidity 0% to 95%(Non-condensing)Operating Temperature 0°C - 40°CStorage Temperature -20°C - 40°C
Features• On-Grid inverter with energy storage• 6KW Maximum PV input• PV direct-supply Function• Pure sine wave output• Microprocessor Controlled to Guarantee Stable
Charging System• Maximum Efficiency Up to 96.5%• Built-In Dual MPPT Solar Chargers• Maximum Charging 100A• LCD Display Panel For Comprehensive
Information• Generator Compatible• Surge Protection• Six inverters in parallel
SP3000 Power-M
SP Power SeriesSP Power
Features
• Pure sine wave inverter
• Built-in MPPT solar charge controller
• Selectable input voltage range for home appliances and personal computers
• Selectable charging current based on applications
• Configurable AC/Solar input priority via LCD setting
• Compatible to mains voltage or generator power
• Auto restart while AC is recovering
• Overload and short circuit protection
• Smart battery charger design for optimized battery performance
• Cold start function
Specifications
Specifications are subject to change without notice.
MODEL SP3000 Power-MRated Power 3000VA/2400W
INPUTVoltage 110/120VAC
Selectable Voltage Range95-140 VAC (For Personal Computers)
65-140 VAC (For Home Appliances)
Frequency Range 50 Hz/60 Hz (Auto sensing)
OUTPUTAC Voltage Regulation (Batt. Mode) 120VAC ± 5%
Surge PowerPeak Efficiency
6000VA
93%
Transfer Time10 ms (For Personal Computers)
20 ms (For Home Appliances)
Waveform Pure sine wave
BATTERYBattery Voltage 24 VDC
Floating Charge Voltage 27 VDC
Low Battery Alarm Voltage (load ≥ 50%) 21.2VDC
Shutdown Voltage (load ≥ 50%) 19.2 VDC
Overcharge Protection 33 VDC
Maximum Utility Charging Current 60A
SOLAR CHARGERMaximum PV Rated Power 2000W
Maximum PV Array Open Circuit Voltage 145Vdc
Operation Voltage Range N/A
MPPT Operation Voltage Range 30~115Vdc
Maximum Charging Current 80A
Standby Power Consumption 2W
JOINT UTILITY AND SOLAR CHARGINGMaximum Charging Current 140A
PHYSICALDimension (D×W×H) 120×295×468 mm
Net Weight 11.5kgs
OPERATING ENVIRONMENT
Humidity 5% to 95% Relative Humidity(Non-condensing)
Operating Temperature 0°C - 55°C
Storage Temperature -15°C - 60°C
The system is designed for 120V to provide more choices.
Friendly solutions that shall help reduce on the electricity bill.
Built-in AC charger and PV solar charger controllers.
Parallel operation with up to 6 units.
Solar Inverter
10
Solar Inverter
11
SP Vitality
Specifications
Specifications are subject to change without notice.
MODEL SP5000 VitalityRated Power 5000WINPUTRated Voltage 230 VACVoltage Range 190-300 VACFrequency Range 50 Hz/60 Hz (Auto sensing)OUTPUTAC Voltage Regulation (Batt. Mode) 230VAC ± 5%
Overload Capacity60 seconds for 100% ≤ load ≤ 110% 30 seconds for 110% < load ≤ 150% 10 seconds for 150% < load ≤ 200%
96.5%Transfer TimePeak Efficiency
20msWaveform Pure sine waveBATTERYBattery Voltage 48 VDCVoltage Range 40VDC~56VDCLow Battery Alarm Voltage 42 VDCMaximum discharge Current 150AMaximum Utility Charging Current 50 A SOLAR CHARGERMaximum PV Rated Power 6000WMaximum PV Array Open Circuit Voltage 500VDCMPPT Operation Voltage Range 150~450VDCStart-up Voltage 150VDCMaximum input Current 10A× 2Maximum Charging Current 100AStandby Power Consumption 60WJOINT UTILITY AND SOLAR CHARGINGMaximum Charging Current 100APHYSICALDimension (D×W×H) 168×580×408mmNet Weight 24.2kgsOPERATING ENVIRONMENTHumidity 0% to 95%(Non-condensing)Operating Temperature 0°C - 40°CStorage Temperature -20°C - 40°C
Features• On-Grid inverter with energy storage• 6KW Maximum PV input• PV direct-supply Function• Pure sine wave output• Microprocessor Controlled to Guarantee Stable
Charging System• Maximum Efficiency Up to 96.5%• Built-In Dual MPPT Solar Chargers• Maximum Charging 100A• LCD Display Panel For Comprehensive
Information• Generator Compatible• Surge Protection• Six inverters in parallel
SP3000 Power-M
SP Power SeriesSP Power
Features
• Pure sine wave inverter
• Built-in MPPT solar charge controller
• Selectable input voltage range for home appliances and personal computers
• Selectable charging current based on applications
• Configurable AC/Solar input priority via LCD setting
• Compatible to mains voltage or generator power
• Auto restart while AC is recovering
• Overload and short circuit protection
• Smart battery charger design for optimized battery performance
• Cold start function
Specifications
Specifications are subject to change without notice.
MODEL SP3000 Power-MRated Power 3000VA/2400W
INPUTVoltage 110/120VAC
Selectable Voltage Range95-140 VAC (For Personal Computers)
65-140 VAC (For Home Appliances)
Frequency Range 50 Hz/60 Hz (Auto sensing)
OUTPUTAC Voltage Regulation (Batt. Mode) 120VAC ± 5%
Surge PowerPeak Efficiency
6000VA
93%
Transfer Time10 ms (For Personal Computers)
20 ms (For Home Appliances)
Waveform Pure sine wave
BATTERYBattery Voltage 24 VDC
Floating Charge Voltage 27 VDC
Low Battery Alarm Voltage (load ≥ 50%) 21.2VDC
Shutdown Voltage (load ≥ 50%) 19.2 VDC
Overcharge Protection 33 VDC
Maximum Utility Charging Current 60A
SOLAR CHARGERMaximum PV Rated Power 2000W
Maximum PV Array Open Circuit Voltage 145Vdc
Operation Voltage Range N/A
MPPT Operation Voltage Range 30~115Vdc
Maximum Charging Current 80A
Standby Power Consumption 2W
JOINT UTILITY AND SOLAR CHARGINGMaximum Charging Current 140A
PHYSICALDimension (D×W×H) 120×295×468 mm
Net Weight 11.5kgs
OPERATING ENVIRONMENT
Humidity 5% to 95% Relative Humidity(Non-condensing)
Operating Temperature 0°C - 55°C
Storage Temperature -15°C - 60°C
The system is designed for 120V to provide more choices.
Friendly solutions that shall help reduce on the electricity bill.
Built-in AC charger and PV solar charger controllers.
Parallel operation with up to 6 units.
Solar Inverter
10
Solar Inverter
11
SP5000 Vitality Eco
SP Vitality Eco SeriesSP Vitality Eco
Specifications
Specifications are subject to change without notice.* Output power may be reduced for temperature > 40°C
Features• On-Grid inverter with energy storage• 96% High Efficiency• 60A Charging Current• 200% Overload• Net-metering & Self-use functions• Available for LiFePO4 Batteries• USB Firmware Update design• Parallel Operations• Cloud monitoring for iOS & Android APP (Optional)
MODEL SP5000 Vitality EcoRated Power 5000VA/4000WINPUTRated Voltage 230 VACVoltage Range 190-300 VACFrequency Range 50 Hz/60 Hz (Auto sensing)OUTPUTAC Voltage Regulation (Bat. Mode) 230VAC ± 5%
Overload Capacity60 seconds for 100% ≤ load ≤ 110% 30 seconds for 110% < load ≤ 150% 10 seconds for 150% < load ≤ 200%
Line Mode 96%Bat. Mode 92%
Transfer Time
Peak Efficiency
4msWaveform Pure sine waveBATTERYBattery Voltage 48 VDCVoltage Range 40VDC~56VDCLow Battery Alarm Voltage 42 VDCMaximum discharge Current 150AMaximum Utility Charging Current 60 A SOLAR CHARGERMaximum PV Rated Power 5000WMaximum PV Array Open Circuit Voltage 500VDCMPPT Operation Voltage Range 150~450VDCStart-up Voltage 150VDCMaximum input Current 20AMaximum Charging Current 60AStandby Power Consumption 60WJOINT UTILITY AND SOLAR CHARGINGMaximum Charging Current 60APHYSICALDimension (D×W×H) 116x425×388mmNet Weight 14KgOPERATING ENVIRONMENTHumidity 0% to 95% (Non-condensing)Operating Temperature -20°C - 55°C
SP SeniorSP Senior
Specifications
Specifications are subject to change without notice.
MODEL SP1000 Senior
Rated Battery Voltage 12V 24V
Rated Power 800W 1000W
Surge Protection 2000W 2400W
OUTPUT
AC Voltage Regulation (Batt. Mode) 230VAC ± 5%
Frequency 50 / 60Hz
USB Port 5Vdc @ 2100mA
Outlet Socket 1pcs
> 85%
Waveform
Circuit Protection Yes
BATTERY
Battery Voltage (Auto-detect) 12V 24V
Low Battery Alarm Voltage 10.5V ± 0.5V 21V ± 0.5V
Shutdown Voltage 9.5V ± 0.5V 20V ± 0.5V
Overload Protection 900W 1200W
Battery Polarity Reverse By Fuse
PHYSICAL
Dimension (D×W×H) 345×137×79mm
Net Weight 2.2Kg
OPERATING ENVIRONMENT
Humidity 5% to 95% Relative Humidity (Non-condensing)
Operating Temperature 0°C - 55°C
Storage Temperature -15°C - 60°C
Peak Efficiency
Modified Sine Wave
Small, light and flexible solution.
Simple life, simple inverter
Features• Dual output for 1pcs AC socket & 1pcs 5V 2.1A USB
• Green energy saving
• LED indicator design
• 12Vdc and 24Vdc Auto-Detect
• Reverse-polarity protection
• Output short circuit protection
Solar Inverter
12
Solar Inverter
13
SP5000 Vitality Eco
SP Vitality Eco SeriesSP Vitality Eco
Specifications
Specifications are subject to change without notice.* Output power may be reduced for temperature > 40°C
Features• On-Grid inverter with energy storage• 96% High Efficiency• 60A Charging Current• 200% Overload• Net-metering & Self-use functions• Available for LiFePO4 Batteries• USB Firmware Update design• Parallel Operations• Cloud monitoring for iOS & Android APP (Optional)
MODEL SP5000 Vitality EcoRated Power 5000VA/4000WINPUTRated Voltage 230 VACVoltage Range 190-300 VACFrequency Range 50 Hz/60 Hz (Auto sensing)OUTPUTAC Voltage Regulation (Bat. Mode) 230VAC ± 5%
Overload Capacity60 seconds for 100% ≤ load ≤ 110% 30 seconds for 110% < load ≤ 150% 10 seconds for 150% < load ≤ 200%
Line Mode 96%Bat. Mode 92%
Transfer Time
Peak Efficiency
20msWaveform Pure sine waveBATTERYBattery Voltage 48 VDCVoltage Range 40VDC~56VDCLow Battery Alarm Voltage 42 VDCMaximum discharge Current 150AMaximum Utility Charging Current 60 A SOLAR CHARGERMaximum PV Rated Power 5000WMaximum PV Array Open Circuit Voltage 500VDCMPPT Operation Voltage Range 150~450VDCStart-up Voltage 150VDCMaximum input Current 20AMaximum Charging Current 60AStandby Power Consumption 60WJOINT UTILITY AND SOLAR CHARGINGMaximum Charging Current 60APHYSICALDimension (D×W×H) 425×388×116mmNet Weight 14KgOPERATING ENVIRONMENTHumidity 0% to 95% (Non-condensing)Operating Temperature -20°C - 55°C
SP SeniorSP Senior
Specifications
Specifications are subject to change without notice.
MODEL SP1000 Senior
Rated Battery Voltage 12V 24V
Rated Power 800W 1000W
Surge Protection 2000W 2400W
OUTPUT
AC Voltage Regulation (Batt. Mode) 230VAC ± 5%
Frequency 50 / 60Hz
USB Port 5Vdc @ 2100mA
Outlet Socket 1pcs
> 85%
Waveform
Circuit Protection Yes
BATTERY
Battery Voltage (Auto-detect) 12V 24V
Low Battery Alarm Voltage 10.5V ± 0.5V 21V ± 0.5V
Shutdown Voltage 9.5V ± 0.5V 20V ± 0.5V
Overload Protection 900W 1200W
Battery Polarity Reverse By Fuse
PHYSICAL
Dimension (D×W×H) 345×137×79mm
Net Weight 2.2Kg
OPERATING ENVIRONMENT
Humidity 5% to 95% Relative Humidity (Non-condensing)
Operating Temperature 0°C - 55°C
Storage Temperature -15°C - 60°C
Peak Efficiency
Modified Sine Wave
Small, light and flexible solution.
Simple life, simple inverter
Features• Dual output for 1pcs AC socket & 1pcs 5V 2.1A USB
• Green energy saving
• LED indicator design
• 12Vdc and 24Vdc Auto-Detect
• Reverse-polarity protection
• Output short circuit protection
Solar Inverter
12
Solar Inverter
13
SP300 / SP600 Junior
SP Junior SeriesSP Junior
Specifications
Features
• Simulated sine wave AC output
• 12Vdc and 24Vdc models available
• Protection from connecting the wrong voltage battery
• Output short circuit protection
• Battery Low, Battery Depleted, Overheating alarms
• High efficiency
Specifications are subject to change without notices.
Model SP300 Junior SP600 JuniorDC System DC 12V DC 24V DC 12V DC 24VOutput Power Continuous Power 300W Continuous Power 600WSurge Power 900W 1500WStandby Current < 0.5A < 0.4A < 0.5A < 0.3AInput Voltage 10VDC~15VDC 20VDC~30VDC 10VDC~15VDC 20VDC~30VDCOutput Voltage AC 100V, 110V, 120V, 220V, 230V, 240V AC 100V, 110V, 120V, 220V, 230V, 240VOutput WaveformEfficiency
Simulated Sine Wave Simulated Sine Wave> 90% > 85%
Initial Checking Auto-Detecting Wrong Battery Cont. ex. 12V / 24VOutput Regulation +5/-8% Intelligent AVR ± 5% Intelligent AVROutput Frequency 50Hz , 55Hz , 60Hz Crystal ControlledCooling Control AUTO-OPERATION FANOutput Short Output Short Circuit Protection
Low Battery < 10.5V ± 0.5V PRE-ALARM, < 9.5V ± 0.5V Shut Down & Alarm
< 21V ± 1V PRE-ALARM, < 20V ± 1V Shut Down & Alarm
< 10.5V ± 0.5V PRE-ALARM, < 9.5V ± 0.5V Shut Down & Alarm
< 21V ± 0.5V PRE-ALARM, < 20V ± 0.5V Shut Down & Alarm
Over Heating > 60°C Pre-Alarm, > 65°C Shut Down & AlarmOver Load >330W Pre-Alarm, >360W Shut Down & Alarm >630W Pre-Alarm >660W Shut Down & Alarm
FuseBy FuseBattery Polarity Reverse
35A×1PC 20A×1PC 25A×3PCS 15A×3PCSAC Outlet 2 AC Outlets, EUROPEAN TYPE: 1 AC Outlet 2 AC Outlets, EUROPEAN TYPE: 1 AC OutletDimension (L×W×H) 120×73×73mm 215×113×62mmNet Weight 0.6Kg 1.5Kg
SP Revival SeriesSP Revival Water Pumps installation has been a challenge in areas lacking AC utility power. Thus hindering irrigation and water supply project in remote regions.
Opti inverters supply AC power to any conventional pump directly from Solar Panels.
Zero operating cost and maintenance free operation makes it the best solar option for Irrigation for orchards, gardens and farms.
Features
• Built-in MPPT solar controller
• Design for three-phase motors
• Multiple protections and self Diagnosis
• Soft start Function prevent water hammer effect
• Comprehensive LCD Display & LED indicators
• Remote Monitioring by RS-485 communication interface
Specifications
MODEL SP7000 Revival SP10000 Revival
Rated Power 7500W 11000W
Recommended Pump Capacity 3~9HP 10~14HP
AC OUTPUT
AC Voltage Regulation (Batt. Mode) 3 ×380/400/415/440vac
Efficiency > 97%
Maximum Output Current 15A 22A
Motor Type Three-phase asynchronous motor
Frequency Accuracy ± 0.2%
PV INPUT
Maximum PV Array Power 12000W 17600W
Maximum DC Voltage 800 VDC
Start-up Voltage 250 VDC
MPPT Voltage Range 250 ~ 780 VDC
Number of MPPT Controller 1
Maximum Input Current 14.5 A 22A
PROTECTION
Protection Over-voltage / under-voltage / over-current / surge / over - Temperature /
short circuit protection
PHYSICAL
Dimension (D×W×H) 110×230×330mm
Net Weight 6kg 6.5kg
Ingress Protection Rating IP20
INTERFACE
Communication Port RS232 / RS485
OPERATING ENVIRONMENT
Humidity < 95% Relative Humidity (Non-condensing)
Operating Temperature Full load: - 20°C - 45°C Power derating: 46°C - 60°C
Specifications are subject to change without notice.
Solar Inverter
14
Solar Inverter
15
SP7000 / SP10000 Revival
SP Revival SeriesSP Revival Water Pumps installation has been a challenge in areas lacking AC utility power. Thus hindering irrigation and water supply project in remote regions.
Opti inverters supply AC power to any conventional pump directly from Solar Panels.
Zero operating cost and maintenance free operation makes it the best solar option for Irrigation for orchards, gardens and farms.
Features
• Built-in MPPT solar controller
• Design for three-phase motors
• Multiple protections and self Diagnosis
• Soft start Function prevent water hammer effect
• Comprehensive LCD Display & LED indicators
• Remote Monitioring by RS-485 communication interface
Specifications
Specifications are subject to change without notice.
MODEL SP7000 Revival SP10000 Revival
Rated Power 7500W 11000W
Recommended Pump Capacity 3~9HP 10~14HP
AC OUTPUT
AC Voltage Regulation 3 ×380/400/415/440vac
Efficiency > 97%
Maximum Output Current 15A 22A
Motor Type Three-phase asynchronous motor
Frequency Accuracy ± 0.2%
PV INPUT
Maximum PV Array Power 12000W 17600W
Maximum DC Voltage 800 VDC
Start-up Voltage 250 VDC
MPPT Voltage Range 250 ~ 780 VDC
Number of MPPT Controller 1
Maximum Input Current 14.5 A 22A
PROTECTION
Protection Over-voltage / under-voltage / over-current / surge / over - Temperature /
short circuit protection
PHYSICAL
Dimension (D×W×H) 110×230×330mm
Net Weight 6kg 6.5kg
Ingress Protection Rating IP20
INTERFACE
Communication Port RS232 / RS485
OPERATING ENVIRONMENT
Humidity < 95% Relative Humidity (Non-condensing)
Operating Temperature Full load: - 20°C - 45°C Power derating: 46°C - 60°C
Solar Inverter
15
SP1600 AVR~ SP4000 AVR
SP AVR SeriesSP AVR
Features• Adjustable voltage-transfer points & charging voltage• Automatic restart of load after inverter shutdown• Smart AVR function (Two buck / boost modes)• Dual AC input for main & Generator• Wide input range 110V~360V• Dry contact signal to trigger auto-start generator• Cold-start capable• Battery Temperature Sensor• Full-functional of LCD display with Audible alarms• Intelligent double-stage charging control; Adjustable charging
current by DIP switches for different battery types• Thermal control cooling fan• DC/AC Isolation
Built-in AVR function.
Wide range of grid input for unstable electricity
Specifications are subject to change without notice.
Specifications
MODEL SP1600 AVR
SP2400 AVR
SP3200 AVR
SP4000 AVR
Rated Power 1600VA / 1200W
2400VA / 1800W
3200VA / 2400W
4000VA / 3200W
INPUT
Voltage 100V/110V/115V/120V or 200V/220V/230V/240V Selectable
200V/220V/ 230V/240V Selectable
Voltage Range 70V ~ 155V or 140V ~ 310V 140V ~ 310V
Regulation Range
Enhanced Buck +28% of selected nominal voltageBuck mode +10% of selected nominal voltageBoost mode -10% of selected nominal voltageEnhanced Boost -25% of selected nominal voltage
Frequency Range 50 Hz/ 60 Hz (Auto sensing)Surge Protection
1X0V 1824 Joules2X0V 1940 Joules
OUTPUTAC Voltage Regulation (Batt. Mode) ± 3% Crest FactorEfficiency (Normal mode)
3:197%
Transfer Time 3 msOver current protection YesWaveform Pure sine waveBATTERYBattery Voltage 24 VDC 36 VDC 48 VDCFloating Charge Voltage 27 VDC 40.5 VDC 54 VDC Low Battery Alarm Voltage 21 VDC 31.5 VDC 42 VDCShutdown Voltage 20 VDC 30 VDC 40 VDCOvercharge Protection 30 VDC 45 VDC 60 VDCMaximum Utility Charging Current 25 A 35 A 30 A SOLAR CHARGER (OPTIONAL)Maximum Power Rating 675W 1000WMaximum solar charge current 25A 20ASuuggested operating Voltage Range 30~40 VDC 40 ~ 63
VDC 60 ~ 84 VDC
Polarity Protection YesPHYSICALDimension (D×W×H) 510×200×180mm Net Weight 15kgs 26kgs 34kgs 41kgsOPERATING ENVIRONMENTOperating Altitude 0 ~ 3000 metersHumidity 5% to 95% Relative Humidity (Non-condensing)Operating Temperature 0°C - 40°CStorage Temperature -15°C - 55°C
Solar Inverter
16
OM6PV300
Solar Module
Specifications
Specifications are subject to change without notice.
Features• Standard anodized black and silver aluminum frame.
• Modules with 60 solar cells connection in series.
• Strict Power measurement minimizes the power tolerance to +0-4.99W
I-V Curves
MODEL OM6PV300 MODEL OM6PV300
MAXIMUM POWER (Pmax) 300W DIMENSION (W×L×H) 1640×992×40mm
VOLTAGE @ Pmax (Vpm) 32.36V WEIGHT Approximately 18.5kg
CURRENT @ Pmax (Ipm) 9.28A PACKING CONFIGURATION Vertical
OPEN CIRCUIT VOLTAGE (Voc) 40.69V SIZE OF CARTON 170×110×105mm
SHORT CIRCUIT CURRENT (Isc) 9.84A PALLET QUANTITY 25 pcs/pallet
OUTPUT TOLERANCE +0~4.99W LOADING CAPACITY 700pcs HQ
MAXIMUM SYSTEM VOLTAGE 1000VDC JUNCTION BOX IP65, weatherproof
SERIES FUSE RATING 20A SYSTEM CELL 6" Single-crystalline sillicon
EFFICIENCY OF MODULE 18.74% NO. OF CELLS AND CONNECTIONS 60 pcs in series (6×10)
TEMPERATURE
ISC -0.05%/°CTEMPERATURE
-40 to +85°C
VOC -0.31%/°C -40 to +85°C
Pmax +0.45%/°C
17
Solar Module
w w w . o p t i - s o l a r . c o m
©2018 OPTI International Corporation. Names and trademarks herein are the property of their respective companies.
Tel: +886-2-2246-7272Fax: +886-2-2246-7312mail: [email protected]
OPTI-Solar USATel: Tel: +1-909-869-5700Fax: +1-909-869-5730
It's who we are from the embracement of Mother Earth
Link Energy to a Better life
OPTI-Solar Life-BlendingSmart Energy Solution
OPTI-Solar Europe B.V.Tel: +31-40-2628057Fax: +31-402546006
OPTI-Solar Middle EastTel: +9714-8819-838Fax: +9714-8819-938