OPPOSED PISTON MODEL 38D 8-18 - Fairbanks-Morse · OPPOSED PISTON MODEL 38D 8-1/8 Legendary Power....
Transcript of OPPOSED PISTON MODEL 38D 8-18 - Fairbanks-Morse · OPPOSED PISTON MODEL 38D 8-1/8 Legendary Power....
• 1% Pilot Fuel, 99% Gas
• Designed & developed for a wide array of electrical power
generation and heavy industrial applications
• 40+ Year Service Life
• Shock-qualified cylinder block with excellent
maintenance access
• 40% thermal efficiency - simple cycle
• Automatic seamless switch from gas to diesel if gas supply
is interrupted
• Base load (110% overload 2/24 hrs)
• Longer bearing life due to conservative operating speed
OPPOSED PISTON MODEL 38D 8-1/8
Legendary Power. Driving the Future
Diesel & Dual Fuel
Key Features & Benefits
• Emergency Nuclear Reactor Cooling
• Power Generation
• Marine Propulsion
• Compression
• Pumping
• Emergency Power
• Nuclear Power Plants
• Water Management Facilities
• Marine Vessels
• Natural Gas Compressors
• Pump Drives
• Hospitals
• Municipalities
• Industrial Power Generation
Applications Installations
Fairbanks Morse701 White Ave.Beloit, WI 53511800.356.6955
OPPOSED PISTON MODEL 38D 8-1/8
www.fairbanksmorse.com
©2014 Fairbanks Morse. All rights reserved Form 3007 0214
Dimensions (MM) Dry Weight kg (lbs)Cyl. A B C
6 6375 2616 3302 28100 (61820)
9 7874 2362 3327 34000 (74800)
12 8992 2134 3073 39000 (85800)
Dimensions
Power Ratings
Drawings are for illustration only. For installation obtain certified prints.
Notes
All Ratings subject to factory approved application.
Ratings are based on:90 degree F (32.2 degree C) ambient temp.28.25 in Hg. (71.6 cm Hg) barometric pressure (min)1500 ft. (457 m) altitude (max)Standby ratings availableThe kWe ratings are based on generators with nominal efficiencies of 96.2%
CYL Aspiration
50HZ 1000 RPM
kWe
60HZ 900 RPM
kWe
6 Turbo-blower 1506 1506
6 Turbocharged 1580 1580
9 Turbo-blower 2260 2260
9 Turbocharged 2370 2370
12 Turbo-blower 3013 3013
12 Turbocharged 3165 3165
Engine SpecificationsCylinder Configuration ...........................................................6L, 9L, 12LCylinder Bore - mm (in) .......................................................... 206 (8.1)Piston Stroke - mm (in) ......................................................... 254 (10.0)Cycle ........................................................................................ 2 Stroke
Displacement/Cylinder - L (cu in) ......................................... 16.9 (1037)Aspiration ................................. Turbocharged/Turbo-blower-AftercooledMean Piston Speed - m/s (ft/s) ..............................7.6 - 8.5 (25.0 - 27.8)BMEP - bar (psi) ...................................................9.3 - 10.8 (134 - 157)