Operation Instruction Manual for Automatic Glue Remover
-
Upload
xicart-global-cell-phone-repair-parts-and-machines-wholesale-online-store -
Category
Documents
-
view
163 -
download
0
description
Transcript of Operation Instruction Manual for Automatic Glue Remover
©Global Cell Phone Repair Parts & OCA Refurbishing Machines Wholesale Online Store Tel: +86 13528895042 Mail: [email protected] Skype: sales.xicart Website: www.xicart.com
AutomaticAutomaticAutomaticAutomatic Glue RemoverGlue RemoverGlue RemoverGlue Remover OOOOperation peration peration peration IIIInstructionnstructionnstructionnstruction
Automatic Glue Remover Machine (SKU: JX0103)
Buy this machine: http://www.xicart.com/automatic-glue-remover-for-iphone-samsung-lcd-repair.html
Global Cell Phone Repair Parts & OCA Refurbishing Machines
Wholesale Online Store
We specialized in providing full line of high quality Cell Phone Parts and OCA refurbishment
machines with a very low price. Wholesale and retail available worldwide.
http://www.xicart.com
Tel: +86-13528895042 Mail: [email protected]
©Global Cell Phone Repair Parts & OCA Refurbishing Machines Wholesale Online Store Tel: +86 13528895042 Mail: [email protected] Skype: sales.xicart Website: www.xicart.com
The first time you use the machine,you must connect well the current source,air resource and the vacuum
motor.Make it sure that it function well and then turn on circuit breaker and press the current switch .There are
details in the picture below .
ONE:ONE:ONE:ONE:Parameters
1, the input voltage:AC 220V
2, the machine total power:about 500W
3, Enter the total pressure:0.45-0.6MP
4, the control voltage:DC 24V
5, the working environment:from -3 to 40 Celsius
6, Machine size:380*550*600
7, weight:23KG
短路在此
位置开机
前打开
Emergency stop switch ( For emergency stop)
Vacuum motor socket
Vacuum and air intake air passages joint Pressure
regulator
The power
switch
Automatic start switch
Touch screen
©Global Cell Phone Repair Parts & OCA Refurbishing Machines Wholesale Online Store Tel: +86 13528895042 Mail: [email protected] Skype: sales.xicart Website: www.xicart.com
TWO:New machine installation step 1.removed vacuum motor after you received the machine
2.Unscrew the oil filler cap and add special vacuum pump oil
3,Access intake pipe and vacuum tube
Access Air Compressor
Access vacuum tube
©Global Cell Phone Repair Parts & OCA Refurbishing Machines Wholesale Online Store Tel: +86 13528895042 Mail: [email protected] Skype: sales.xicart Website: www.xicart.com
4,Access vacuum motor, access to power, open space open
Open up
the open
Access
power
Open
switch
Turn the power
switch, can
operate the
machine
If you need to collect glue, please wrap the
double-sided adhesive on this roller
©Global Cell Phone Repair Parts & OCA Refurbishing Machines Wholesale Online Store Tel: +86 13528895042 Mail: [email protected] Skype: sales.xicart Website: www.xicart.com
THREE: machine institution name and disassemble Note:in operation this , cut power and gas, in case
danger !
Note: The least once a month air compressor oil pump position, if less than the
scale of the next cell, you must stop and put oil in!
TP Pressure
gauge
Regulat
Emergency
stop button
NOTE::::Must be unscrewed before use Start button
After the limit
position X03
X04 front limit
position
Origin position X02
No oil
position
Full oil
position
©Global Cell Phone Repair Parts & OCA Refurbishing Machines Wholesale Online Store Tel: +86 13528895042 Mail: [email protected] Skype: sales.xicart Website: www.xicart.com
Four: Touch panel operation
1.Boot screen
This screen will be displayed after boot
2.The picture of operating
(1) Exchange Manual and automatic by pressing this button .
(2) The speed of back after manually move forward.
(3) The location value of the location start.
(4) When open this button ,The speed of the forward will be to the fastest speed!
(5) Click this button means keeping the vacuum motor on ,or off.
(6) Click this button to control motor rotation,Click again to off!
(7) Click this button to trachea down,Click again to up!
(8) Click this button to motor at the highest speed back to the origin!
Click this
button to enter
the system
1
2
3
4
5
Exchange
Chinese
with
English
by
6
7
8
9
10
11
12
©Global Cell Phone Repair Parts & OCA Refurbishing Machines Wholesale Online Store Tel: +86 13528895042 Mail: [email protected] Skype: sales.xicart Website: www.xicart.com
(9) Click this button the electricity opportunities according to (3) the position
of the value forward,automatic stop after arrival!
(10) Click this button to platform to move forward!
(11) Click this button to platform to back!
(12) Click the button to enter the abnormal information interface!
Note:Note:Note:Note: point before your device automatically returns to its original state! The
platform must in the middle, click Motor homing! Platform will return to the
original position!
3.Automatic monitor screen
(1) The controller IO, input and output information!
(2) This button can eliminate abnormal points!
(3) Click on this button to input the serial number of the using program!
(4) Set the temperature of the this program and displays the current actual
value.
(5) the starting location of remove rubber.
(6) The speed of the starting location.
(7) Remove rubber distance value.
(8) The speed of remove rubber.
(9) Click on this button to remove the count data.
(10) Click on this button to set parameters!
(11) Click on this button to enter the system to modify(Modify the temperature
compensation value,generally do not need to be modified).
(12) Automatic startup.
3
5
6
7
4
8
9
10
11
12
2
©Global Cell Phone Repair Parts & OCA Refurbishing Machines Wholesale Online Store Tel: +86 13528895042 Mail: [email protected] Skype: sales.xicart Website: www.xicart.com
4.Parameter Settings
Click on the parameters set button to enter the picture
Click on the parameters set button to enter the picture, Click on the product written, enter the following screen to download.
Click on the parameters set button to enter the picture,Click on the product written, enter the following screen to Modify the parameters.
©Global Cell Phone Repair Parts & OCA Refurbishing Machines Wholesale Online Store Tel: +86 13528895042 Mail: [email protected] Skype: sales.xicart Website: www.xicart.com
5.The alarm picture
(1)Click to clear the alarm,then the machine back to the initial state.
(2)Click to clear the alarm recording.
(3)Display alarm history record.
(4)show the alarm information of any moments..
Tips:Only under the condition of pressure can the machine work.If you want to return the
device to the its initialization,you must make sure that you press the stopping button(red
one)with pressure(let out the button in time)and then return .Only being operated in that
way will the machine work normally.
1
3
4
2
©Global Cell Phone Repair Parts & OCA Refurbishing Machines Wholesale Online Store Tel: +86 13528895042 Mail: [email protected] Skype: sales.xicart Website: www.xicart.com
6.6.6.6. Parameter Settings value
Model Temperature Start Point Distance Speed Remove Speed
ip4 50 46 96 45 3
ip5 50 46 104 45 3
ip6 50 42 120 45 3
ip6plus 50 27 130 45 3
Common abnCommon abnCommon abnCommon abnormal problems and treatmentormal problems and treatmentormal problems and treatmentormal problems and treatment::::
1111,Click the button on the touch screen machines did not respond.
Solve methods:
(1)Check the machine is powered and connected ventilation vacuum motor,
the specific operations, please refer to "new machine installed step"
(2)Check the emergency stop is pressed, if you press please unscrew!
Then press the reset and try again!
(3)Disassemble the machine table cover, look at the back of the touch
screen plug is loose, then plug by hand tight! See "disassemble step"
2222,In automatic mode, the temperature of the mold is not!
Solve methods:
First, the temperature is set high, view the heating relay lamp is lit,
replace the relay does not shine. Bright replacement of heating
rods. See "disassemble step"
3333, In manual mode, the automatic mode can not play, point stepping forward, stepping
back, motor homing buttons do not respond.
Solve methods:
Turn off the power, re-open, and then click on the Forward button in
the manual interface, so the heating plate mold machine under went
to the middle, then back to the origin or the normal operation of
the press can automatically!
4444,In manual mode, the automatic mode can not enter。
Solve methods:
Check vacuum motor, motor speed and cylinder button is pressed,
please press the reset if you can!
©Global Cell Phone Repair Parts & OCA Refurbishing Machines Wholesale Online Store Tel: +86 13528895042 Mail: [email protected] Skype: sales.xicart Website: www.xicart.com
5555,In manual mode, point vacuum motor or speed motor or cylinder buttons do not
respond.
Solve methods:
1,Point vacuum motor does not respond: Check vacuum motor power cord is
plugged in, or plug position. Vacuum tube is connected!
2.Point speed motor did not respond: speed control motor speed motor relay
broken or bad damage!
3,Point cylinder Button does not respond: Check whether the air supply
connected. If you did not take a good response, indicating that the solenoid
valve is broken!
SIXSIXSIXSIX::::EASY BROKEN PARTS MOULDEASY BROKEN PARTS MOULDEASY BROKEN PARTS MOULDEASY BROKEN PARTS MOULD
PLC+TP EX2N-43H-18MRT-2AD-1P-S
Jog buttons LA167-D8-11 绿
Emergency button LA167-D8-11ZS 红
Select button LA167-D8-11X/2
Switching Power
Supply RS-100-24
Solid State Relays SM2425DA
Disconnect Switch DZ47-60 C16 2P
©Global Cell Phone Repair Parts & OCA Refurbishing Machines Wholesale Online Store Tel: +86 13528895042 Mail: [email protected] Skype: sales.xicart Website: www.xicart.com
Disassemble step:::: Unload TP 1 Unload TP 2
Each component removal 1 Each component removal 2
Switching Power
Vacuum,
heating and
motor control
relay
Motor
Driver Solenoid
valve
Heater Vacuum
connection Temperature
sensor
©Global Cell Phone Repair Parts & OCA Refurbishing Machines Wholesale Online Store Tel: +86 13528895042 Mail: [email protected] Skype: sales.xicart Website: www.xicart.com