Open High Speed and

Medium Speed Water

Spray Nozzles

VID Fire-Kill Aps

Svalbardvej 13 I DK-5700 Svendborg I Ph. +45 6262 1024

Fax. +45 6262 3661 I Mail: sales@vidaps.dk I Web: www.vid.eu

© VID Fire-Kill 2015 We reserve the right to alter the information without further notice. Images and diagrams are for information only and may not be accurate.

Model HS—High Speed Water Spray Nozzle

Factory Mutual Approved to Class 2025

The Model HS nozzles are designed for fire protection and cooling of primari-ly tanks, building and structures against hydrocarbon fires.

Nozzle strainers have 2mm mesh size and all internal water ways have diame-ters larger than 3mm. Nozzles should only be utilized in pipe systems with clean internal pipe surfaces and cavities. Nozzles should be installed in sys-tems with a main-line water strainer with mesh size less than 3mm. The high speed nozzle function is making it possible to utilize the nozzles in very harsh wind conditions.

INNOVATIVE FIRE PROTECTION SOLUTIONS

Model HS23 HS43 HS80

Nominal K-Factor 24,5 42,5 80

Nominal spray angle 120 dg 120 dg 90 dg

Operating pressure 2—10 Bar 2—10 Bar 2—4 Bar

Material Naval brass or Titanium. Brass, Plated brass and Stainless steel without FM Approval.

Strainer material Stainless steel

Inlet threads 1” NPT Male

Model MS—Medium Speed Water Spray Nozzle

Factory Mutual Approved to Class 2025

Model MS are a medium velocity water spray nozzles which delivers a full cone spray of water from the nozzle in an angle of 90º or 120º. The nozzle functions with a water pressure of 2-4 bar making it possible to utilize the nozzles in very harsh wind conditions.

The Model MS16-120 nozzle is designed for fire protection and cooling of primarily tanks, building and structures against hydrocarbon fires.

Model MS-16 MS-23 MS-40 MS-59

Nominal K-Factor 16 23 40 59

Nominal spray angle 90dg or 120 dg 90dg or 120 dg 90dg or 120 dg 90dg or 120 dg

Operating pressure 2—4 Bar 2—4 Bar 2—4 Bar 2—4 Bar

Material Naval brass or Titanium. Brass, Plated brass and Stainless steel without FM Approval.

Strainer material Stainless steel

Inlet threads 1/2” NPT Male