On your schedule! Creo Skills Optimization Programs · the weekends for self-study. Remote...
2
Ve-I is State of MA Section 30 & TAA Approved Program is WIOA/Section 30/Trade Act Eligible Ve-I is a NH Licensed Career School Pricing is subject to revision at any time. Ve-I reserves the right to change fees, courses, topics, policies, programs, services and personnel as required. We are a Veteran Friendly Institution Classes can be taken individually May also include desktop application classes as needed. Visible Edge, Inc. 38 Technology Way The Millyard Technology Park Nashua, New Hampshire 03060 Telephone: (603) 595-1422 Fax: (603) 595-5677 Email: [email protected] Website: www.visible-edge.com Creo Skills Optimization Programs Visible Edge Institute All Inclusive Live Instructors Remote and In-Center Employee Development On your schedule! “GI Bill® is a registered trademark of the U.S. Department of Veterans Affairs (VA). More information about education benefits offered by the VA is available at the official U.S. government website at http://www.benefits.va.gov/gibill.” These programs are designed for the employed individual who needs flexible training options. Program options allow the student to take their training in-office or in-center, when they want to, while maintaining on-demand access to Ve-I instructors during normal business hours. Students can access training lessons online afterhours & over the weekends for self-study. Remote Attendance: Students can tap directly into our training center remotely and work with our on- staff instructors’ on-demand like they would in a physical training room. The instructors can talk to the students and view their workstation session to help a student with their exercises or share their own screen to lecture. In-Center Attendance: For a small, one-time, incremental fee, students can upgrade their program and attend training in our physical training center. As always our instructors’ are available on-demand when you need them. Ve-I provides the facility, workstation & software required to execute the coursework. The Associate level programs cover the vast majority of the applications skills that most employees will need to do their job. The Professional level programs have advanced classes plus Mathcad. The Expert level programs add advanced analysis and manufacturing classes. All classes listed are available for 12 months. Training facility is open during normal business hours Monday – Friday from 7:00AM to 5:00PM except Federal Holidays. Instructor support is limited to purchased training materials and labs. Remote students must have access to legal SolidWorks Licenses and required modules for the training. A Student Edition may be supplied for an additional fee. Remote setup assistance is included.
-
Upload
vuongtuyen -
Category
Documents
-
view
219 -
download
4
Transcript of On your schedule! Creo Skills Optimization Programs · the weekends for self-study. Remote...
Ve-I is State of MA Section 30 & TAA Approved Program is WIOA/Section 30/Trade Act Eligible
Ve-I is a NH Licensed Career School
Pricing is subject to revision at any time. Ve-I reserves the right to change fees, courses, topics, policies, programs,
services and personnel as required.
We are a Veteran Friendly Institution
Classes can be taken individually
May also include desktop application classes as needed.
Visible Edge, Inc.
38 Technology Way The Millyard Technology Park
Nashua, New Hampshire 03060 Telephone: (603) 595-1422
Fax: (603) 595-5677 Email: [email protected] Website: www.visible-edge.com
Creo Skills Optimization
Programs
Visible Edge Institute
All Inclusive
Live Instructors
Remote and In-Center
Employee Development
On your schedule!
“GI Bill® is a registered trademark of the U.S. Department of Veterans Affairs (VA). More information about education benefits offered by the VA is available at the official U.S.
government website at http://www.benefits.va.gov/gibill.”
These programs are designed for the employed individual who needs flexible training options. Program options allow the student to take their training in-office or in-center, when they want to, while maintaining on-demand access to Ve-I instructors during normal business hours. Students can access training lessons online afterhours & over the weekends for self-study. Remote Attendance: Students can tap directly into our training center remotely and work with our on-staff instructors’ on-demand like they would in a physical training room. The instructors can talk to the students and view their workstation session to help a student with their exercises or share their own screen to lecture. In-Center Attendance: For a small, one-time, incremental fee, students can upgrade their program and attend training in our physical training center. As always our instructors’ are available on-demand when you need them. Ve-I provides the facility, workstation & software required to execute the coursework. The Associate level programs cover the vast majority of the applications skills that most employees will need to do their job. The Professional level programs have advanced classes plus Mathcad. The Expert level programs add advanced analysis and manufacturing classes. All classes listed are available for 12 months. Training facility is open during normal business hours Monday – Friday from 7:00AM to 5:00PM except Federal Holidays. Instructor support is limited to purchased training materials and labs. Remote students must have access to legal SolidWorks Licenses and required modules for the training. A Student Edition may be supplied for an additional fee. Remote setup assistance is included.
Upgrade Expert*
Includes Associate & Professional Classes +
Simulation
Using Mathcad with a Parametric Modeler
Behavioral Modeling
Introduction to Simulation
Manikin (Human Factors)
Mechanism Simulation
Mechanism Design
Industrial
Flexible Modeling
Freestyle Surface Design
Routed Systems
Cabling using Parametric Modeling
Piping using Parametric Modeling
Routed Systems Designer
Manufacturing
Turning
Milling
Mold Design
Process for Assemblies
Up to 42 Classes Total Unlimited Instructor Access
Only $4,499.00
Upgrade to Unlimited In-Center Access - Add $499.00
Associate Program Includes the following Class Topics
Foundational Creo Modeling Concepts Creo Updates (from any older version) Introduction to Parametric Modeling - Fundamentals Introduction to Parametric Modeling - Productivity Tools Detailing & Engineering Drawings Creating 3-D Drawings Advanced Modeling Advanced Assembly Design
Advanced Creo Modeling Concepts Using Parametric Relations Creating & Managing Family Tables Detailing using Tolerancing & GD&T Sheetmetal Design
Up to 11 Classes Unlimited Instructor Access!
Only $2,499.00 Upgrade to Unlimited In-Center Access - Add $499.00
Purchase a PTCU License from Visible Edge with your Associate
Program and have In-Center Access added for free!
Upgrade Professional *
Includes all Associate Classes +
Simulation
Pro/PROGRAM
Intro to Creo Simulate & FEA
Industrial
Surfacing
Interactive Surface Design
Engineering Skills
Fundamentals of GD&T ASME Y14.5 1994 or 2009
GD&T ASME Y14.5 2009 Update
Advanced GD&T
Mathcad
Plotting
Working with Units
Symbolics and Solving
Application Orientation
Data Exchange and Analysis
Integration with SolidWorks
Programming Mathematical Expressions
Design of Experiments Using Mathcad Prime
Using Mathcad with a Parametric Modeler
Up to 27 Classes Total Unlimited Instructor Access
Only $3,499.00
Upgrade to Unlimited In-Center Access - Add $499.00
