“On site” grinding
Transcript of “On site” grinding
“on site” machining and grinding
We offer custom solutions to all kind of
“on site” machining and grinding
Our Technical Design Office will find the optimal
solution to your problem
We carry out dimensional reports of all works we
do, and ever warrant the quality that customers
demand us.
We design and manufacture our own machining
tools applying the last technological advances.
That way we get reduced intervention times and
carry out complex and accurate machining
works.
Please don’t hesitate to contact us:
• Phone: (+34) 986 48 64 71
• E-mail: [email protected]
“on site” machining and grinding
“on site” machining and grinding
MILITARY SHIPBUILDING Flattening and drilling of cannon flange on Frigate F-105
“on site” machining and grinding
Inner bowls Circular milling “On site” M48 threading
Bedplate “on site” machining according plane
SHIPBUILDING “On site “ machining of bedplate for main engine on submarine
“on site” machining and grinding
Ø 5200mm machining
Inner milling
Flattening
Automatic drilling
B
E
V
E
L
L
I
N
G
SHIPBUILDING “On site” machining of VOITH and SCHOTTEL propeller flanges (1 of 2)
“on site” machining and grinding
Absolute flatness of
0,15mm on Ø 5000mm
Dimensional report issuance
LEVALIGN ULTRA measurement
apparatus from PRÜFTECHNIK
Absolute tolerance of
drilling: less than 0,2mm
SHIPBUILDING “On site” machining of VOITH and SCHOTTEL propeller flanges (2 of 2)
“on site” machining and grinding
Square flange of side = 3770 mm Automatic shape follower
SHIPBUILDING “On site” machining of square flanges for Wärtsilä Retractable Thrusters
“on site” machining and grinding
“On site”·line boring and facing
Custom shapes with CNC Alignment with ROTALIGN
SHIPBUILDING “On site” line boring and facing
“on site” machining and grinding
SHIPBUILDING “On site” machining of diesel engines. Conical machining. Crankpin grinding.
Crankpin “on site” grinding
“On site” machining of diesel engine blocks
Conical machining and Keyway machining
on ship helm
Traducir mejor a
linea de bancada
“on site” machining and grinding
AUTOMATIC HONING MACHINE
For cylinder liners
SPECIFICATIONS
Max. Outer Diameter [mm] 850
Max. Length [mm] 1350
Rougness Range [Ra] 0,05 - 2,4
Angle Range [º] 5 - 100
PLC Precise Angle Control
Roughness Report
Advance and spin are
synchronized achieving perfect
angle in edges Dimensional report before and after
honing
“on site” machining and grinding
Motor bedplate milling
Pump bedplate milling
Portable milling machine. Bench length: 2500mm.
Level tolerance: less than 0,15mm/m
THERMAL ENERGY Motor and pump bedplates milling on Thermal Plant
“on site” machining and grinding
THERMAL ENERGY Slip Ring grinding on alternator shaft
Portable grinding machine with automatic advance:
reduced grinding time on urgent interventions.
“on site” machining and grinding
“On site” machining in bridge construction work.
We designed and produced a custom milling machine
for this work.
Reparation on TBM (Tunnel Boring Machine)
head during tunneling work
Blade seat recovery through
“on site” boring and facing Damaged seat recharge Machined seat
CIVIL WORKS
“on site” machining and grinding
WIND POWER
Braking track recovery on ring gear.
“On site” flattening and drilling. Repair of wind turbines shafts and ring gears.
Flatness report with
LEVALIGN ULTRA
(PRÜFTECHNIK)
Flattening of flanges from Ø 1000mm to Ø 6000mm
CNC Drilling
Wind turbine shaft repair.
“on site” machining and grinding
Shaft end “on site” machining Keyway “on site”·machining
INDUSTRY Shaft end “on site” machining. Keyways machining. “On site” grinding
Mecanizado de punta de eje en digestor
de grasas animales
Shaft “on site” grinding
“On site” grinding of rolling
tracks on drying trommel
“on site” machining and grinding
AUTOMOTIVE
Gearbox machining on 1000 Tm machine press
Machine press
table flattening
Rolling track
grinding on
dimensional
control machine