OMRON NT20 Product Information April 25, 2007. OMRON 2 About the NT20 1. Replacement of the...
-
Upload
ashlyn-walton -
Category
Documents
-
view
218 -
download
0
Transcript of OMRON NT20 Product Information April 25, 2007. OMRON 2 About the NT20 1. Replacement of the...
2OMRON
About the NT20About the NT20
1. Replacement of the NT20SContinue to use the screen and ladder for the NT20S. RoHS compliant ( ** there are times you’ll need to modify the communication for NT20M and some of NT20S)
2. Transfer the screen data easily, using a memory unit Enable to send or receive the screen data without the personal computer by using the “NT-MF261”
4. Support not only Japanese and
English but Simplified Chinese
3. Connection with OMRON Support high-speed NT link 1:N, and all memory area of CJ/CS
3OMRON
Product ConceptProduct Concept
CompatibilityMaintain compatibility with functions NT20S supports and customers’ data, such as screen data
Panel cut:: the width is same as the NT20S, the height is same as the NT20M
NT20M: mount the attachment
Model NT20-ST121(B) --- Japanese
NT20-ST121(B)-E ---- English
NT20-ST121(B)-EC ---- Simplified Chinese
Function Improve functions for the PT
1) Support high-speed NT link 1:N2) Support all memory area of CS/CJ
Release Will be released in May. The NT20 will be shipped at the beginning of May.
4OMRON
Product SpecificationProduct Specification
1) NT20
2) NTST
Model Description Specification
NT20-ST121-EC Language: Simplified Chinese, case color: Ivory
NT20-ST121B-EC Language: Simplified Chinese, case color: Black
NT20-ST121 Language: Japanese, case color: Ivory
NT20-ST121B Language: Japanese, case color: Black
NT20-ST121-E Language: English, case color: Ivory
NT20-ST121B-E Language: English, case color: Black
Model Description Specifications
NT-ZJCMX1-V4 Japanese, Version 4.80J
NT-ZJCAT1-EV4 English , Version 4.80E
NT-ZJCAT1-ECV4 Simplified Chinese, Version 4.80C
5OMRON
Product Composition 1)Product Composition 1)
1)NT20 PT
2) NTST(CD-ROM)
Hardware: without battery, pre-install the system program for OMRON PLC connection that is compatible with the NT20S
Spacer is supplied with as a default Acrylic board for infilling the space(2mm) when mounting the NT20 into the panel cut of NT20S
NTST-V4.8 NT20 is supported
System program
Add the system program for the NT20
TU V2.0 Transfer utility, support some of NT20S and NT20M newly
System installer V2.0 Add the NT20 support
3)NT20-ATT01Attachment for mounting NT20 into panel cut of NT20M. There is a connector to transfer by a tool in front. Connect with the port for a tool in the backside of NT20, using a straight cable
6OMRON
Product Composition 2)Product Composition 2)
4) NT20 ー IF001I/F Convert board
Board to convert the signal and position from SH2 compatible bus for memory unit of the NT20 to H8/532 compatible bus of the NT20M
Attachment for I/F unit fixing Attachment to fix I/F unit for NT20, NT600M-LB122-V1, and NT600M-RT121
7OMRON
Panel CutPanel Cut
NT20S: Spacer that is supplied withNT20S: Spacer that is supplied withNT20M: Attachment NT20M: Attachment
NT20S/NT21 NT20M
178.5 209
100.598.5
NT20 98.5x178.5
8OMRON
DimensionsDimensions Expansion I/F
・ Able to connect the NT-MF261
・ Able to connect the communication unit for NT20M series using the ”NT20-IF001”
Monochrome STN Blue mode
Terminal with cover
24V,0V,NC
D-sub9pin×2
PORTA:HOST , TOOL sharingPORTB:HOST communication onlyHOST communication*2 is not available.
Contrast VR
DIPSW
Reset SW
9OMRON
Hardware 1: NT20SHardware 1: NT20S
Existing Model Replacement NoteNT20S-ST121(B)-V3 NT20-ST121(B) Mitsubishi A/Fx are available.
NT20S-ST122(B)-V1 NT20-ST121(B)
+NT600M-LB122-V2
+NT20-IF001
Attachment and host I/F are required
NT20S-ST124 NT20-ST121(B) The connection with Mitsubishi PLC: can replace. The connection with Toyoko PLC: cannot replace
NT20S-ST161(B)-V3 NT20-ST121(B) The mode for LCD is changed from the white mode to the blue mode
10OMRON
Hardware 2: NT20M DMHardware 2: NT20M DM methodmethod
Existing model (PT+ ROM) Replacement Note
NT20M-DT1*1+SMR01(Host link DM method, RS-232C)
NT20-ST121+NT20-ATT01
The conversion of system program is required.
NT20M-DT1*1+SMR01 (SYSBUS method)
NT20-ST121 +NT600M-RT121+NT20-ATT01
+NT20-IF001
Attachment and host I/F are required. The conversion of system program is required.
NT20M-DT1*1+SMR02 NT20-ST121
+NT600M-LB122-V1+NT20-ATT01
+NT20-IF001
Attachment and host I/F are required. The conversion of system program is required
NT20M-DT1*1+SMR03(parallel BUS/2)
None Please order the demand in units by end of September, 2007.
Note) If NT20-ST121 with conversion of system program is used for NT20M replacement, “Resume function” and “Displayed screen history” of NT20M does not work properly on NT20-ST121.
11OMRON
Hardware 3 : NT20M DirectHardware 3 : NT20M Direct
Existing model (PT + ROM)
Replacement Note
NT20M-DT1*1+SMR31(Host link direct)
NT20-ST121+NT20-ATT01
The tool transfer in the PT sets to “NT20M”
NT20M-DT1*1+SMR32 (C200H direct)
NT20-ST121
+NT600M-LB122-V1+NT20-ATT01
+NT20-IF001
Attachment and host I/F are required.The tool transfer in the PT sets to “NT20M”
NT20M-DT1*1+SMR34(NT Link)
NT20-ST121+NT20-ATT01
The tool transfer in the PT sets to “NT20M”
12OMRON
Procedure for replacement Procedure for replacement NT20SNT20S
Host link/NT link/Mitsubishi communications Set communications according to operate the PT
system menu. PT system pre-installed as a default can operate as it now stands. Post the
attached spacer to PT when panel cut is loose.
C200H I/F Mount the I/F unit “NT20-IF001” into the NT20,
and attach the “NT600M-LB122-V1”
In this case, the depth is from 57mm to 81mm,
(increase 24mm)
The setting menu for C200H I/F is displayed only when I/F
is connecting.
13OMRON
Procedure for replacement Procedure for replacement NT20MNT20M
Mount the “NT20-ATT01” into the NT20 to fit
the panel cut for the NT20M Host link/NT link/RS-232C Replace with NT20 by converting the PT system menu.
Can select the communication in the PT system menu
C200H I/F Mount the I/F unit “NT20-IF001” into the NT20, and attach the
“NT600M-LB122-V1” In this case, the depth is from 80mm to 81mm.
SYSBUS I/F Mount the I/F unit “NT20-IF001” into the NT20, and attach the
“NT600M-RT121” In this case, the depth is from 80 mm to 81mm.
14OMRON
Connection with an external 1: Connection with an external 1: Supported PLCSupported PLC
Support the same models, such as CxxH, C200H including α, CQM1, SRM1, communication units for C500/1000/CV, and Mitsubishi A/Fx, that NT20M and NT20S support
Add the following CPUs for the case of replacing the PLC
・ CS/CJ (support all memory area)・ CP1H/L・ CQM1H・ Mitsubishi Q computer, Fx existing models (however, can access within an area that NT20S supports
For customers who are using the “SYSBUS I/F”, add the PLC “CS1” that enable you to connect “C200H-RM201”.
15OMRON
Connection with an external 2: Connection with an external 2: Transfer by a toolTransfer by a tool
1. Create the data that can access to all memory area of CS/CJ newly and transfer it.
Select “NT20” in the NTST-V4.8 and the PT. Unable to read out the file in the tool V4.08 lower when selecting the NT20, saving the file and uploading the data. (only upward compatibility).
2. Replace from the NT20S If the PT system is pre-installed as factory default, enable to upload, download and
edit the existing file by selecting “NT20S” with NTST (old version is available) or DOS tool.
3. Replace from NT20S not supported with NTST or NT20M
Convert the PT system into that of supported model, and set the tool transfer method to “NT20M”. Select “NT20S/NT20M”with DOS tool or transfer with TU (transfer utility) supplied with NTST-V4.8
The NT20 operates as the NT20S and NT20M when converting the system.Able to upload and download with not only *mm format but DOS tool format of NT20M and NT20S(*M2? Format) by using TU
16OMRON
Connection with an external 3: Connection with an external 3: System transfer 1)System transfer 1)
NT20 as well as NT11, NT21, NT31 , and NT631 can rewrite PT system program
Method of rewrite: 1. Communication from the personal computer
2. Memory unit “NT-MF261”
Use system installer “NTINSTW V2.0” supplied with NTST-V4.8 to transfer from the personal computer.Download from the personal computer to the PT is available. Upload from the PT to the personal computer is not available.
Target system program is supplied with NTST-V4.8
17OMRON
Connection with an external 3: Connection with an external 3: System transfer 2)System transfer 2)
The system for the NT20 is as follows.
1) Support host link, NT link, C200H (direct) and Mitsubishi communication (Japanese/English) 2) English/Chinese version for the above communication 3) Replacement for the NT20M DM method, support host link,C200H, SYSBUS, RS-232C 4) Support RS-232C (Japanese/English)
JPN ENG CHNFor NT20S Host link 1 1,2 2
NT link (1:1/1:N) 1 1,2 2 1Compatible system "NT20S-ST121"(Jan/Eng)
(ST121(Jap/Eng) pre-install)
Mitsubishi A/Fx 1 1,2 2 2Compatible system "NT20S-ST121"(Eng/Chn)
(ST121(Chn) pre-install)
C200H 1 1,2 3 DM method compatible " NT20M" (Jan/Eng)For NT20M Host link 3 3DM method C200H 3 3
SYSBUS 3 3RS-232C 3 3
NOTE: The transfer of resource data (font) is required when changing system language from Japanese to Chinese, from Chinese to Japanese. Transfer using system installer V2.1.
18OMRON
Connection with an external 4: Connection with an external 4: Memory UnitMemory Unit
The replacement for “P-ROM of screen data “ that is possible in the NT20M is a memory unit.
Use the “NT-MF261” that is being used in the NT21, NT31, and NT631, regarding the hardware of a memory unit.
Its usage is same as those of NT21, NT31 and NT631.(For details, refer to “Set up manual for NT21/NT31/NT631” )
19OMRON
Shipping informationShipping information
NT 20-ST121(B)-(E)(C) : April 25NT -ZJCMX1-V4.8 (Modification Notice) : April
24NT-ZJCAT1-EV4.8 (Modification Notice) : May 9
(Schedule: will be fixed at MPP1-2/3)NT 20- IF 001 : May 14NT20-ATT01 : May 28 (plan)
NT-ZJCAT1-ECV4.8 : May 28 (plan)
Manual: has been already available. Manual number: V091-E1 Catalogue: Not available. PDF file will be available by beginning of June. Catalogue number: V052-E1-07
20OMRON
NT20S/NT20M Schedule for discontinuationNT20S/NT20M Schedule for discontinuation
•April 25, 2007 G-friend Open April 25, 2007 G-friend Open
•May, 2007 May, 2007 Shipping start Shipping start
•September 2007 NT20S/NT20M main body will be discontinued September 2007 NT20S/NT20M main body will be discontinued
•March 2009 March 2009 Peripherals for the NT20S/20M Peripherals for the NT20S/20M including I/F unit including I/F unit will be discontinued will be discontinued
•September 2014 September 2014 The acceptance for repair of NT20S and NT20M will end.The acceptance for repair of NT20S and NT20M will end.
Commodity for the NT20S/20M will be discontinued. Commodity for the NT20S/20M will be discontinued.
•March 2016 March 2016 The acceptance for repair of peripherals for the NT20S/20M will end. The acceptance for repair of peripherals for the NT20S/20M will end.
21OMRON
Position of TerminalPosition of Terminal■NT20 3 terminals(24V,0V,NC) with the cover
■NT20S 2 terminals (24V,0V)
■NT20M 4 terminals ( 24V,0V,HOST RUN INPUT,ALM OUTPUT) with the cover
38
40
38
48
48
32
53.5
57
80
4.5
4
4
36
53
66
190178
190178
220208
11098
110100
11098
22OMRON
Position of RS232Position of RS232■NT20
■NT20S
■NT20M
52.5
29
48
57
19.5
39.530
43
57
28
9
9
23OMRON
Difference in LCDMDifference in LCDM
109.22115.17
Display size for NT20 is slightly larger. The resolution is the same.
1) Number of dots:260*140 256*128 dots of them are used in the NT20
2) Dot size: □0.437□0.45
3) Effective display area: 109.22*55.906 115.17*57.57
55.906 57.57
0.437 0.45
0.407 0.42
NT20S,NT20M(256*128) NT20 (256*128)