OMNIstar Product Sheet

OMNIstar Product Sheet - 17/03/2015 - To make sure this is the most recent revision, please consult www.schreder.com. 1/25

Copyright © 2015 Schréder SA. All rights reserved. Specifications are of an indicative nature and subject to change without notice.

OMNISTAR

FEATURES

Real alternative to HID luminaires for high-power applications

Cost-effective and efficiency to maximise energy and maintenance savings

Flexibility: modular approach for high-power applications

LensoFlex®2 or collimators offering high performance photometry, comfort and safety Reflectors with thermal sensor included on the PCBA for long lasting performance On-site photometric adjustment Surge protection 10kV (optional)

Designed to incorporate Owlet range of control solutions: autonomous network and interoperable network

TYPES OF APPLICATION

Tunnels Sports lighting Large areas

Roundabouts Industrial halls Car parks

Roads and highways Monuments and façades

LIGHTING SOLUTION BASED ON MODULES

To satisfy field requirements in terms of light distribution and the mounting system footprint, the OMNISTAR is a modular solution.



DIMENSION DRAWING

DIMENSIONS AND CHARACTERISTICS

OMNIOB (OMNISTAR) Length (mm) 530 Width (mm) 532 Height (mm) 80 Weight (kg)** 16 Tightness level* IP 65, IP 66 Impact resistance* IK 08 Electrical class* Class I EU, Class II EU Aerodynamic resistance (CxS) 0.260m²

* According to IEC-EN60598 and IEC-EN62262 ** Average weight. The max weight is +/- 10% more but for the exact weight according to the configuration, please contact us.

SUMMARY

CONCEPT The OMNIstar has been designed to provide an unrivalled combination of performance and flexibility for lighting areas where high lumen packages are needed (from 30 to 120.000lm) while offering maximum energy savings. The modular concept of optical units which enables 1, 2 or 3 modules to be grouped on the same bracket and the performing LensoFlex®2, Collimators and/or Reflectors LED engines means that the OMNIstar luminaire provides a wide range of lighting distributions and lumen packages to meet the specifications of the area to be lit. On-site adjustment guarantees the perfect lighting. Recommended installation height: between 8 and 30m HOUSING & FINISH • Housing in high-pressure, die-cast aluminium, polyester powder coated • Protector: thermally hardened glass • Screws in stainless steel • Colour: AKZO 900 grey sanded • Tightness - optical: IP 66



• Tightness - driver: IP 20/IP 65 • Impact resistance: IK 08 INSTALLATION • Standard “U” bracket for direct fixation (2 x M12, 4 x M8 or 1 x M20) • On-site adjustment • Adapted bracket for Duo (2 optical blocks) and Trio (3 optical blocks) versions • Additional accessories for mounting: o vertical mast or tube with collards for poles with a diameter of 60 and 76mm o direct post-top mounting for a diameter up to 60mm (for single version) o side-entry for a diameter of up to 60mm (for single and duo version) • Delivered pre-wired for easy installation (with quick connector in option) • Remote driver box for outdoor and indoor versions • Easy plug-in of the separate driver box and LED optic module with quick connectors enables the OMNIstar to take advantage of future technological evolutions and facilitates maintenance operations OPTICAL UNIT • “FutureProof” optical unit, replaceable on-site, enclosed in the housing with a removable gasket - Shore50 • Protected against lens degradation by 5mm thick extra clear hardened glass • Flatbed PCB with acrylic lens overlay principle • Various photometric distributions: from motorway to large areas • CRI > 70 • ULOR: 0% LED lumen depreciation • Lifetime residual flux @ Tq=25°C @ 100.000 hrs: 350mA & 500mA: 90%; 700mA: 80% ELECTRICAL • Class I or Class II • Input voltage: 120-277V - 50-60Hz • Power factor > 90% at full load • 10kV surge protection • Automatic power-off at opening STANDARDS & CERTIFICATIONS • CE • ENEC • LM79-80 • ETL • ROHS • All measurements in ISO17025 accredited laboratory OPTIONS • OWLET remote management and dimming options • Diffused glass for comfort • Back Light control system • WW & CW LEDs • Various types of mounting systems can be accommodated with tilting mechanism • IP 66 driver box with all the cables and fast connectors for an easy installation • Protection grid • Other RAL or AKZO colours



CONCEPT

1. Thermix® for long lasting performance The thermal management of LEDs is crucial for a luminaire’s reliability To maximise effectiveness and maintain flux over time, several parameters are optimised:

Thermal compartmentalisation between the LEDs and the control gear

Direct conduction by minimising the path between the heat source and the outside

Optimised design of the external heat exchange surface

OPTIONS

1. OWLET wireless remote management dimming & control system

The luminaires are pre-programmable, wireless programmable or remotely programmable and controllable. Each individual light point can be switched off/on or dimmed at any time. Operating state, energy consumption and failures are reported and stored in a database with the exact timestamp and geographical location. Owlet helps lighting managers to assure the right lighting level while reducing operating costs and maintaining a sustainable outdoor lighting scheme. The wireless Luminaire Controllers (LuCo) exist in different types, all of them are compatible with each other.

1. Shows status of all light points per zone, per street…

2. Defines dimming profiles automatically/manually

3. Produces reports automatically/manually (operating & consumption)

4. Alarm schemes (failures, faults, consumption via SMS, phone, email )

5. Connects to 3rd party systems

6. Data exchange with other servers

7. Data management

Available Luminaire Controllers:

LuCo-PD: Wireless Individual Luminaire Controller with integrated photocell that is mounted on top of the luminaire. Connected to the driver via a cable.

LuCo-NXP: Wireless Individual Luminaire Controller integrated inside the luminaire with shark fin antenna on top.

Both types of luminaire controllers can control of individual luminaires or clusters of luminaires. They build a bi-directional mesh network amongst each other to the Segment Controller (one SeCo per 100/150 light points).

The above mentioned LuCo’s, are commissioned either manually introduction in the web GUI (Graphical User Interface) or via the use of a wireless handheld device that allows automatic geo-positioning on the Owlet NightShift GUI.



*Segment controller & Antenna + cable order number:

Equipment Order no. Description

Segment Controller 00-05-921 Segment Control

Segment Controller Cable + Antenna GSM/UMTS + Zigbee 2,4GHz

00-05-922 Cable 1m

00-05-924 Cable 2m

00-05-927 Cable 3m

00-05-925 Cable 5m

00-05-923 Cable 7m

00-05-926 Cable 10m

Commissioning tool C777260 TMGT Wireless Handheld Tool Kit

2. Motion and/or presence detection

Motion detection is compatible with any type of control or dimming system. It will enhance the efficacy of the installation by only increasing the light level when a vehicle or a pedestrian is detected.

2.1 Stand-alone luminaire

This solution needs to be integrated in each luminaire if the installation is equipped with regular dimming without remote wireless connection.

2.2 Stand-alone network of luminaires

To monitor stand-alone networks or luminaire clusters with motion and/or presence detectors. The location of the detection device can be multiple (for example, either attached or integrated in the luminaire or in a remote location. To detect the arrival of a person that requires light, the sensor can either be on one, on a selection of luminaires, on all luminaires or in a remote location for the most optimum detection. In that case, in addition to the sensor selection, the LuCo-ADP will serve as communication node in all of the luminaires in the network. Each sensor can be attributed to one or multiple luminaires and vice versa!

LuCo-ADP: Wireless Individual Luminaire Controller to manage a cluster of luminaires. The LuCo is integrated inside the luminaire with an antenna on the top. The luminaires communicate between each other via a bi-directional mesh network. A Master or Segment Controller is only temporarily required during the set-up of the system.

2.3 Remote wireless solutions (interoperable)

For installations with remote wireless solutions, the motion and presence detectors can also be located on one, on a selection of luminaires, on all luminaires or in a remote location to detect the arrival of people in the most optimum way. The LuCo-NXP and LuCo-PD will in that case play the role of the communication node. This option combines the functionality of the stand-alone network with remote wireless control.

2.4 Presence detection capabilities

The detection capabilities depend on the height of the installation and the type of sensor.



The settings of the luminaire will determine: - The temporisation: the length of time a luminaire is switched on when a presence is detected - When the sensor is idle or in detection mode - The inclination of the luminaire influences the scope of the detection zone

The integration of sensors into round luminaires, needs to be synchronised and oriented according to the photometry and the motion path. Our staff is happy to help you with this analysis.

A stand-alone unit to integrate into a wireless Owlet control network; either autonomous or interoperable and equipped w/o PIR sensor:

Equipment Order no. Description

Moov-Box P6010000001beu P6010|MOOVBOX|NO SENSOR| LuCo-ADP

Moov-Box P6010000002beu P6010|MOOVBOX|WITH SENSOR|LuCo-ADP

Moov-Box P6010000003beu P6010|MOOVBOX|WITH SENSOR|LuCo-NXP

Moov-Box P6010000004beu P6010|MOOVBOX|NO SENSOR|LuCo-NXP

3. Dimming without wireless remote management

Custom dimming profile; Constant Light Output (CLO); Bi-Power dimming and Dali are available.

3.1 Custom Dimming

This option enables dimming profiles with up to 5 levels to adapt the light according to the real needs during the night. The dimming profile can be set up in two ways. The standard way determines the dimming profiles based on the middle of the night and is fully operational after 3 full nights. The second way (on request) determines that the night starts from the moment that the lights are switched on. The dimming profiles are immediately operational.



3.2 Constant Light Output

This system compensates for the depreciation of luminous flux and to avoid excess lighting at the beginning of the installation's service life, providing substantial energy savings.

3.3 Bi-Power functionality

In several countries an extra wire, a so-called control wire or switched line, is distributed throughout the street lighting network. In most cases, when the street lighting is switched on, both the line and the switched line are energized to the 230V level. At a certain point during the night this switched line is switched off from the grid. The bi-power driver detects this signal as a command to reduce the output current to a lower preset value. In most cases this value equals 50%.

4. Photocell

The photocell will switch on the luminaire as soon as daylight has reached a certain level. The photocell is compatible with regular or programmable drivers. Our photocell catalogue is at your disposal should you require a particular photocell according to your regional requirements and regulations.

5. Advanced Photometry

5.1 Back Light control

Back Light control will prevent light spill from the back of the luminaire.

5. Other colours available

Other RAL or AKZO colours are available on request.

Standard lighting consumption LED lighting consumption with CLO Energy savings



LUMEN AND POWER DETAILS

Typical data for Neutral White (NW) LEDs (4000 K, CRI min. 70) at Tq 25° C.

Model Acronym Colour temp.

Flux code

Typical luminaire

output (lm)

Luminaire power

(W)

Luminaire efficacy (lm/W)

Current (mA)

Typical LED flux (lm)

LED Count

OMNISTAR OMNIOB NW 017A0 17700 161 110 350 21600 144 OMNISTAR OMNIOB NW 020A1 20600 206 100 500 25900 128 OMNISTAR OMNIOB NW 023A2 23900 228 105 500 29200 144 OMNISTAR OMNIOB NW 026A3 26800 285 94 700 33600 128 OMNISTAR OMNIOB NW 030A4 30900 322 96 700 37800 144 OMNISTAR OMNIOB NW 033A5 33600 431 78 1000 42200 128 OMNISTAR OMNIOB NW 038A6 38900 470 83 1000 47500 144

Typical data for Warm White (WW) LEDs (3000 K, CRI min. 80) at Tq 25° C.


Flux code

Typical luminaire

output (lm)

Luminaire power

(W)


Current (mA)


LED Count

OMNISTAR OMNIOB WW 016A0 16500 161 102 350 20200 144 OMNISTAR OMNIOB WW 019A1 19300 206 94 500 24200 128 OMNISTAR OMNIOB WW 022A2 22300 228 98 500 27200 144 OMNISTAR OMNIOB WW 025A3 25000 285 88 700 31400 128 OMNISTAR OMNIOB WW 028A4 28900 322 90 700 35300 144 OMNISTAR OMNIOB WW 031A5 31400 431 73 1000 39400 128 OMNISTAR OMNIOB WW 036A6 36300 470 77 1000 44400 144

Typical data for Cool White (CW) LEDs (6200 K, CRI min. 70) at Tq 25° C.


Flux code

Typical luminaire

output (lm)

Luminaire power

(W)


Current (mA)


LED Count

OMNISTAR OMNIOB CW 017A0 17700 161 110 350 21600 144 OMNISTAR OMNIOB CW 020A1 20600 206 100 500 25900 128 OMNISTAR OMNIOB CW 023A2 23900 228 105 500 29200 144 OMNISTAR OMNIOB CW 026A3 26800 285 94 700 33600 128 OMNISTAR OMNIOB CW 030A4 30900 322 96 700 37800 144 OMNISTAR OMNIOB CW 033A5 33600 431 78 1000 42200 128 OMNISTAR OMNIOB CW 038A6 38900 470 83 1000 47500 144

Note: The flux is an indicative average and may vary with the different optics and types of protector. Tolerance on LED flux is ± 7% and on total luminaire power ± 5 %.

The precise flux and corresponding matrix for each configuration are available on www.schreder.com



PHOTOMETRY

Examples of typical applications (non

restrictive list) Distribution type

LensoFlex®2 Collimator Reflector

Road,

Roundabout

Highways

Street light (5136AS, 5137AS, 5138AS, 5139AS)

128 LEDs NA NA

144 LEDs NA NA

Sport

Architectural illumination,

Monuments and façades

Directional beams

(5125CO,5126CO,5127CO, 5128CO)

NA 144 LEDs

Sport

Large Areas (parking, highway, airport APRON)

Asymmetrical beams

2258AS,2259AS,2260AS, 2261AS,2266AS,5120AS, 5121AS,5119AS)

128

or

144 LEDs

NA 144 LEDs

Industrial high-bay, warehouse, expedition zone

Tunnel

Car parks

Symmetrical beams 128

or

144 LEDs

NA 144 LEDs



2258AS

Asymmetrical

Asymmetrical 65°

2259AS

Asymmetrical

Asymmetrical 10°

2259SY

Symmetrical

Asymmetrical 10°

2260AS

Asymmetrical

Asymmetrical 40°

2260SY

Symmetrical

Asymmetrical 40°



2261AS

Asymmetrical

Asymmetrical 55°

2261SY

Symmetrical

Asymmetrical 55°

2261SY

Symmetrical

Asymmetrical 55°

5068

Wide

5118

Medium



5119AS

Asymmetrical

Extra-wide

5120AS

Asymmetrical

Asymmetrical 40°

5121AS

Asymmetrical

Asymmetrical 60°

5125CO

Narrow beam

Narrow beam

5126CO

Medium beam

Medium Beam



5127CO

Wide beam

Wide Beam

5128CO

Elliptical

Elliptical beam

5136AS

Narrow

5137AS

Medium

5138AS

Medium



5139AS

Wide

5140AS

Medium

5141AS

Wide

6293AS

Elliptical beam

6294AS

Narrow beam



GEAR BOX

Outdoor remote cabinet for 1 Optical block (01) also available for 2 or 3 optical blocks

Fixation holes (vertical wall mounting)

Cable entries: Input Cable grommet Ø 6-13

Cable grommet Ø 12-24

Output Connector (Wieland R5T20i 5 poles / blue coded)

Indoor remote gear box (I1) also available for 2 or 3 optical blocks

Fixation holes: 4 x Ø5.5

Cable entries: Input 2 x Cable grommets Ø 6-13

Output Connector (Wieland RST20i 5 poles / blue coded)



CABLES

Please refer to the Cable ordering module where you can select the type of power cable and if needed a data cable

for DALI control.

The optical block (OB) is delivered with an outgoing cable (0.8m) as in the picture below. It can be connected directly to the gear box (indoor or outdoor).



In case a remote gearbox or cabinet (up to 40m) is installed another cable (with connectors) must be used:



FIXATIONS



BRACKET DIMENSIONS

Bracket with 1 optical block - standard U type



>> Accessory: vertical pole mounting kit for pole Ø60mm (standard bracket)

Bracket with 1 optical block - Large U type (e.g. wall mounting)

>> Accessories Mounting kit for horizontal pole - Ø76-108mm

• Post-top (Ø60mm) mounting adapter



Mounting kit for vertical pole - Ø76mm

Bracket with 1 optical block - Surface mounted tiltable



Bracket with 1 optical block - Surface mounted (e.g. tunnel)

Bracket with 1 optical block - suspended



Bracket with 2 optical blocks - vertical pole mounting

Bracket with 2 optical blocks - large U type brackets for horizontal tube



Bracket with 2 optical blocks - large U type brackets for horizontal tube

Your solution is a combination of 2 to 5 modules. You choose the different features to create structured lines of ordering codes.

How to create a valid ordering code for eacH module?

+ + +

MODULE OB

optical block

MODULE GB

gear box

MODULE CA

cables

MODULE FI

fixation

MODULE AC

accessories

+

Depending on your choice of colour temperature, please refer to the corresponding table to find the flux code for the typical lumen pack-age you require(*). Please check the Product ID to make sure that the lumen package you need is available with the size you have chosen.

To choose the photometry, refer to the 4 digit codes beside the curves and diagrams(*). AS = asymmetrical, SY = symmetrical and BL = Back Light control.

(*) The precise flux and corresponding matrix for each configuration are avail-able on www.schreder.com

To configure the ideal solution between the features you need and the available controllers, refer to the description in the Product sheet.

Product id

(6 digits)

Universal(2 digits)

colour temperature + Flux code

(7 digits)

Photometry type

(6 digits) Protector type

(2 digits)

Voltage & elec. class + Dimming

+ Elec. protection (8 digits)

Power cable type

(4 digits)Controller + Photocell +

Sensor(4 digits)

colour(2 digits)

OnLy wITh STAnDArD feATureS

wITh cuSTomiSeD

requeSTS

iso 3166 country

code(2 digits)

custom photometry

Voltage & elec. class + Custom

dimming + Elec. protection (8 digits)

custom power cable

(4 digits)

Customised options (Photometry, Label, finishing) for which you will receive a specific code

(4 digits each)

Specific RAL colour

(8 digits)

ExAmPLeS of vALiD orDering coDeS for moDuLe oB

ProDob - 00 - nW015A0 - 5119AS - gL01 - v16D00S0 - c000 - c000 - f0 - Am - A6 - 0n

Fixation(2 digits)

Options(2 digits

each)

ProDob - AT - nW015A0 - cuSTom - gL02 - v16D00S0 - cAZZ - c000 - f0 - PXXX - LXXX - fXXX - rAL3005m

go to the ordering Data page(s) and select one code per column in order to specify the characteristics of the optical Block. You may choose several options. Please refer to the footnotes to check compatibility between the selected features.

Choose your Flux, Photometry and Control codes by referring to more detailled information included in the Product Sheet.

module ob - optical block

Repeat this procedure for the other modules and select one code per column. You may choose several options if required. Please check compatibility between the specified modules

and pay attention to the footnotes under each table in order to create a fully operational complete solution.

module gb - gear box

eXAmPLe of A vALiD orDering

CODEgear id(6 digits)

Country: universal

(00) or iso 3166 code

(2 digits)

Optical block

quantity (2 digits)

Optical block type

(5 digits)

Voltage, elec. class, dimming and elec.

protection (8 digits)

Input/output

connection (3 digits)

Controller, photocell

and sensor (4 digits)

ProDgb - 00 - o2 - 027A1 - v02D04Se - X00 - c000 - A2AmA6AA - DXXX - LXXX - fXXX - oXXX - ZZ

Options (2 digits each)

colour (2 digits)

Customised options (Dimming, Label, finishing & others) for which you

will receive a specific code (4 digits each)


coDe for PoWer cABLe

Cable ID(6 digits)

Country: universal


(2 digits)

Cable function (power) (2 digits)

Cable length & type

(5 digits)

ProDca - 00 - Pc - P334c

module ca - cables

module fi - fixation


CODEFixation

id(6 digits)

Fixation type

(2 digits)

Options (2 digits)

colour (2 digits)

ProDfi - W1 - A6 - on

module ac - accessories


CODEAccessory

id(6 digits)

Accessory type

(2 digits)

Options (2 digits)

colour (2 digits)

ProDac - Ag - A6 - on


coDe for DATA CABLE

Cable ID(6 digits)

Country: universal


(2 digits)

Cable function

(data) (2 digits)

Cable length & type

(5 digits)

ProDca - 00 - DA - D26DA


coDe for COnnECTIOn

CABLE

Cable ID(6 digits)

Country: universal


(2 digits)

Cable function

(connection OB/GB) (2 digits)

Cable length & type

(5 digits)

ProDca - 00 - co - L175c

ID COUNTRY FIXATIONS OPTIONS COLOUR

PRODUCT

ID

COUNTRY OF

INSTALLATION

[1]

COLOUR

TEMP

FLUX

CODE [2]

PHOTOM

ETRY

TYPE [3]

PROTECTOR VOLTAGE & EL.

CLASS

DIMMING ELECTR. PROTECTION POWER

CABLE

CABLE TYPE CONTROLLER PHOTO CELL SENSOR FIXATIONS OPTIONS [5] COLOUR

OMNIOB 00 NW 5119AS GL01 V16 D00 S0 CA 00 C0 0 0 F0 N0 0N

Universal

Standard

Neutral

White 5120AS

Flat Glass Current DC CLI No Dimming no SPD - no Fuse Standard

Cable

No Cable No Controller No Photocell No Sensor No Fixation No Others AKZO 900 GS

AO WW 5121AS GL02 V17 5C A6 RALxxxx M

Angola Warm

White 5136AS

Flat diffuse

Glass

Current DC CLII 5G0.75² SeaSide Other RAL colour

Matte

AR CW 5137AS ZZ AM RALxxxx B

Argentina Cold White

5138AS

CUSTOM

CABLE

quick-on

connector

Other RAL colour

Brilliant

AU 5139AS AA RALxxxx T

Australia

5140AS

Special labelling Other RAL colour

Textured

… 5141AS PXXX ZZ

5068AS

Photometry

custom

Other specific

paint*

5118AS LXXX

2258ASLabel custom

2258SY FXXX

2259AS

Finishing Colour,

vernish, …

2259SY

2260AS

2260SY

2261AS

2261SY

5125CO

5126CO

5127CO

5128CO

6293AS

6294AS

2266AS

CUSTOM*

OMNIOB _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ V_ _ D _ _ S _ C _ _ _ C _ _ _ _ _ _ _ _ _

Example:

[2] See further Lumen and Power details table. [3] See further Photometrics table.

[4] Schréder fixtures are compatible with most controls equipment available on the market. Please contact Schréder for more information.

[5] Multiple SELECTIONS and VARIANTS concatenation possible eg. -A2-AA-P0Z0-D0W0-C0Y0-S0M0-L0H0.

*Please contact Schréder to specify your requirement. A custom requirement must be validated by Schréder and may impact the delivery leadtime.

OMNIOB-00-NW015A0-CUSTOM-GL02-V16D00S0-CA5C-C000-F0-AMA6AA-PXXX-LXXX-RAL1000 B

Notes: +++ Not all photometries available for all LED configuration please check compatibility in the OMNISTAR PRODUCT SHEET

[1] Please provide country of installation to ensure country specific settings are taken into account. Schréder will provide you the code to use (00 (universal standard) or the country's ISO code).

Module ODORDERING DATA OMNISTAR

OPTICAL BLOCK GEARS CONTROLS [4]

Your Order

Omnistar Product Sheet - 18/03/2015 - To make sure this is the most recent revision, please consult www.schreder.com


OPTIONS COLOUR

GEAR ID COUNTRY OF

INSTALLATION [1]

Voltage & El. Class Connected

Lu. Type

Voltage & El.

Class

Dimming c

E

l

e

El. Protection Input / Output

connection

Controller Photocell Sensor Options Colour

OMNIGB 00 I1 V01 D00

S

4S4 X00 C0 0 0 N0 0N

Universal Standard indoor for 1 OB 120V CLI No Dimming 1

0

10kV + Fuse lamp connection

only

No Controller No Photocell No Sensor No Others AKZO 900 GS

AO I2 V02 D01

S

9S9 C1 A2 RALxxxx M

Angola indoor for 2 OBs 230V CLI 0 - 10V 1

0

10kV + Fuse 5x20mm Time Lag 3A LuCo-NXP Gear plate Other Ral color Mat

AR I3 V03 D02

S

ASA C2 A6 RALxxxx B

Argentina indoor for 3 OBs 230V CLII DALI 1

0

10kV + Fuse 5x20mm Time Lag 4A LuCo-ADP SeaSide Other Ral color

Brilliant

AU O1 D04 SB AA RALxxxx T

Australia outdoor for 1 OB Custom Dimming Profile 10kV + Fuse 5x20mm Time Lag 5A Special labeling Other Ral color

Textured

AT O2 D15 SC DXXX ZZ

Austria outdoor for 2 OBs Telemanagement 10kV + Fuse 5x20mm Time Lag 6.3A Dimming profile custom Other specific paint

BE O3 SE LXXX

Belgium outdoor for 3 OBs 10 kV + Fuse Cartridge 10x38mm 4A

Type GG500V

Label custom

SF FXXX

10 kV + Fuse Cartridge 10x38mm 6A

Type GG500V

Finishing Colour , vernish, …

SG OXXX

10 kV + Fuse Cartridge 10x38mm 10A

Type GG500V

Others

OMNIGB _ _ A 000A0 A _ _ _ _

_

000A0 _ _ _ _ _ _ _ _ _ _

Example OMNIGB-00-O2-027A1-V02D04SE-X00-C000-A2AMA6AA-DXXX-LXXX-FXXX-OXXX-ZZ


Notes LuCo-NXP and LuCo-ADP available only with D15 Telemanagement +++ Dali & 0-10V not available with 1000mA

ORDERING DATA OMNISTAR Module GB

GEAR CONTROL

Your Order

OPTIONS

CABLE ID COUNTRY OF

INSTALLATION [1]

CABLE MODEL Power Cable CABLE TYPE Data Cable CABLE TYPE LED / Gearbox Connection CABLE TYPE Options

OMNICA 00 PC P27 00 D17 DA L12 5C N0

Universal Standard Power Cable Cable length 4m No Cable no connector - dali female - 2m DALI Cable length 4m (without NTC) 5G0.75² No Others

AO DA P28 2C D18 ZZ L13 ZZ CXXX

Angola Data Cable Cable length 5m 2X1.5² dali male - dali female - 2m CUSTOM

CABLE

Cable length 5m (without NTC) CUSTOM CABLE Cables custom

AR CO P29 2D D21 L14

Argentina Connection OB/GB Cable length 6m 2X2.5² no connector - dali female - 10m Cable length 6m (without NTC)

AU P30 3B D22 L15

Australia Cable length 7m 3X1.5² dali male - dali female - 10m Cable length 7m (without NTC)

AT P31 3C D25 L16

Austria Cable length 8m 3G1.5² no connector - dali female - 40m Cable length 8m (without NTC)

BE P32 3D D26 L17

Belgium Cable length 9,5m 3X2.5² dali male - dali female - 40m Cable length 9,5m (without NTC)

P33 3E D27 L18

Cable length 12m 3G2.5² Dali male connector Cable length 12m (without NTC)

P34 4C D28 L19

Cable length 40m 4X1.5² Dali female connector Cable length 40m (without NTC)

4D

4G1.5²

4E

4X2.5²

4F

4G2.5²

5B

5G2.5²

ZZ

CUSTOM CABLE

_ _ _ _ _ _ _ _ _ _ P_ _ _ _ D_ _ _ _ L _ _ _ _ _ _

Example OMNICA-BE-PC-P272C

Notes:


ORDERING DATA OMNISTAR Module CA

Your Order

Options for Cable Model

POWER CABLE DATA CABLE CONNECTION OPTICAL BLOCK / GEARBOX

ORDERING

DATA

COLOUR

Fixation ID Fixation Options Colour

OMNIFI B1 N0 0N

Standard U type bracket No Others AKZO 900 GS

B5 A6 RALxxxx M

Wall mounting U type Large bracket SeaSide Other RAL colour

Matte

PH FXXX RALxxxx B

Vertical Pole mounting for Standard U bracket type Finishing Colour ,

vernish, …

Other RAL colour

Brilliant

PI RALxxxx T

Vertical Pole mounting for large U bracket type Other RAL colour

Textured

PJ ZZ

Post top with Large U type brakcet Other specific paint*

PK

Side entry with Large U type brakcet

W1

Tiltable braquet

W2

Fix Bracket for Surface Mount

S1

Suspended bracket

PL

Pole mounting standard 2 units

PM

Pole mounting standard 3 units

PO

Pole mounting standard 2 unit prepared for Standard U type bracket

_ _ _ _ A1 _ _ _ _

Example OMNIFI-W1-A6-0B

OMNISTAR

COLOUR

Your Order

Module FI

ORDERING

DATA

COLOUR

Accessory ID TYPE Options Colour

OMNIAC AG N0 0N

Protection grid No Others AKZO 900

A6 RALxxxx M

SeaSide Other RAL colour

Matte

FXXX RALxxxx B

Finishing Colour ,

vernish, …

Other RAL colour

Brilliant

RALxxxx T

Other RAL colour

Textured

ZZ

Other specific paint*

_ _ _ _ A _ _ _

Example OMNIAC-AG-A6-0Z

OMNISTAR

COLOUR

Your Order

Module AC

OMNIstar Product Sheet

Documents

Transcript of OMNIstar Product Sheet