OMC Roller Catalog

ROLLER CATALOG

TH

E T

AB

LE

OF C

ON

TE

NTS

TH

E T

AB

LE

OF C

ON

TE

NTS

General Information Page

Tube Sizes and Material 2

Axle Retention and Material 2

Construction 2

Bearing Features and Lubrication 2

Sprocket Information 2

Groove Information 3

Load Capacity Reference 3

Taper Specific Information 3-4

Customizing Rollers 4-5

Stainless Steel Roller Information 6-7

Bearing Selection Guide 8

Coatings and Sleeves 9

Gravity Roller Quote Sheet 10

Sprocketed Roller Quote Sheet 11

Grooved Roller Quote Sheet 12

Tapered Roller Quote Sheet 13

Straight Rollers1" 16

1 3/8" 17-21

1 5/8" 22

1 3/4" 23

1 7/8" 24-25

1.9" 26-32

2" 33-35

2 1/4" 35-37

2 1/2" 37-43

2 9/16" 43-45

3" 46

3 1/2" 47-50

4" 51-53

4 1/4" 54

5" 55-56

6" 57-58

8" 59

Tapered Rollers1 1/2" to 1" 62-63

2 1/2" to 1 11/16" 64-66

PVC and Stainless Steel Rollers1" 68

1" Pipe Rollers (1.315" O.D.) 68

1 3/8" 69

1.9" 70-72

2 1/2" 73

All information is subject to change without notice. Omni reserves the right to correct any errors, inaccuracies, omissions or update content at anytime.

Additional Reference Material Available nBearing Index nRoller Optimization and Measurement Guide

Omni has a large range of standard (pre-engineered) rollers to meet your application needs. We specialize in all types of conveyor rollers from light-duty gravity applications to heavy duty powered applications. This catalog is your guide to our extensive line of pre-engineered rollers. Each page of this roller catalog displays the available components of each roller and a capacity chart for the Between Frame (BF) range of the rollers. The rollers are organized from the smallest O.D. to largest O.D.

In addition to pre-engineered rollers, we offer thousands of tube, axle and bearing combinations to meet your custom application needs. For more information, contact one of our customer service representatives.

Tube Sizes and Material Options nRoller tube diameters ranging from 1" to 8" nTube is specified by the Outer Diameter (O.D.) and tube wall thickness nPipe is specified by the Inner Diameter (I.D.) and a Schedule number that represents wall thickness nRoller tubes are available in the following materials: - Mild (low carbon) steel - Galvanized steel - Stainless steel - Aluminum - PVC (pipe) - Industrial steel pipe

Axle Retention and Material Options nAll axles up to 3/4 (dia. or hex) are available with the spring or cotter pin retention nAll axles larger than 3/4 (dia. or hex) are not available with the spring retention nRound axles 3/4 dia. and larger are available with D-end retention nAxles, springs and cotter pins are available in carbon steel and stainless steel nOther retention styles are available upon request

Construction Crimped / Swaged – This type of roller has a tube which is formed down over the bearing to hold it in place. Bearings installed in this manner are non-replaceable. Counter Bored / Press Fit – This type of roller has a tube which is counter bored to the correct inside diameter for the bearing to be press fit. Bearings installed in this manner are replaceable.

Bearing Features (reference Bearing Selection Guide page 6) Seals – Keeps contaminants out while helping retain grease within the bearing. Seals are made of Teflon, felt, rubber, nylon and mylar depending on the bearing type. Shields – Keeps contaminants out. Can be used in conjunction with a seal. Generally made of steel. Labyrinth Seals – A series of interlocking passageways in the bearing housing that creates a shield. Ball Retainer – Holds ball bearings evenly spaced. Makes for a quieter bearing and improves bearing life. Set-Screws – Locks the inner race onto the axle. Flanged – Flanges are located on the outer race of the bearing. Flanges create a fixed bearing extension from the end of the tube. Flanged bearings cannot be recessed into tubes. Unflanged – Bearings that have a cylindrical body that can be pressed completely into a tube if needed.

Bearing Lubrication O - Oiled – These bearing are generally used in gravity applications requiring a low coefficient of friction. The temperature range of standard oil is 0° to 200°F. GP - Grease Packed – These bearings are generally used in powered applications. The temperature range of standard grease is –10° to 225° F. They are also suitable for higher humidity applications. Regreaseable – Same features as grease packed bearings and have either a drilled inner race or an extended back closure to accept more grease through a grease fitting located on the end of the axle without being removed from the roller. The frame thickness of the conveyor is required when using this style bearing to determine regrease hole location.

General Sprocket Information (reference quote sheet drawing page 9) nSprockets available on all roller sizes with 11 gauge or thicker tube wall nStandard sprockets are A-plate for 40, 50, 60 and 80 series chain nOther sizes and styles are available upon request nSprockets can be placed anywhere along the length of the tube provided they are clear of the bearing and will not cause chain interference

General Information

Example Equation 300 lbs. capacity roller x 3 rollers = 900 lbs.

900 lbs. x 2/3 Rule = 600 lbs. load capacity per 3 rollers

Roller Diameter and Axle Maximum Product Weight (lbs.)

1 in. O.D. - 5 /16 hex 3001 3/8 in. O.D. - 5/16 hex 6001.9 in. O.D. - 7/16 hex 1,500

2 1/2 in. O.D. - 11/16 hex 3,5003 1/2 in. O.D. - 1 1/16 hex 6,0003 1/2 in. O.D. - 1 7/16 dia. 10,000

4 in. O.D. - 1 7/16 dia. 15,0005 in. O.D. - 1 11/16 dia. 25,000

Conveyor Roller Selection for a Given Load Use only 2/3 of the rollers under the product when calculating the required roller capacity because the conveying surface of products is not typically perfectly flat. Common sense tells us that it is not practical to use a 1 3/8" diameter roller on 1 1/2" centers for a 6000 lb. product (12 in. wide x 120 in. long) so in addition to the note above use the following guidelines:

The above guidelines assume "0" shock load and are not applicable for 3 or more lanes. When calculating the required load capacity for rollers in fork lift loading areas, Omni recommends tripling the roller capacity due to shock loading.

General Information

General Groove Information (reference quote sheet drawing page 10) nGrooves available on 1 3/8", 1 5/8", 1 7/8", 1.9", 2" and 2 1/2" O.D. rollers n5/16" narrow grooves are made for 3/16" dia. belt. Narrow grooves can be placed as close as 5/8" from center of groove to center of groove. n1/2" wide grooves are made for 1/4" dia. belt. Wide grooves can be placed as close as 1" from center of groove to center of groove. nGrooves can be placed anywhere along the length of the tube provided they are clear of the bearing and are set at least to the minimum centers noted above.

Taper Specific Information Omni has a line of pre-engineered tapered rollers to meet your conveyor curve application needs. This section is specifically devoted to information unique to tapered rollers.

Tapered rollers are used in gravity or powered conveyor turns. Tapered rollers are designed to match the inside radius of the curve. This allows the product to maintain orientation and conveyor position around a curve. Our standard rollers are designed for industry standard inside radius dimensions. Custom tapered rollers can be created to work with custom inside radius dimensions.

Center ofCurve

Center ofCurve

nIf the taper rate is not true for a given curve then the product will become skewed around the curve.

nIf the taper rate is true it increases the likelihood of maintaining leading edge product orientation through the curve.

Taper Specific Information (continued)

Taper Roller Tube Sizes and Material Options nTwo standard taper tube sizes both available in mild steel and galvanized steel n1 1/2" O.D. to 1" O.D. x 18 ga. wall with a flat section at the large end (1/2" to 4 1/2" of flat depending on BF) n2 1/2" O.D. to 1 11/16" O.D. x 14 ga. wall with a flat section at the large end (1/2" to 8 11/16" of flat depending on BF)

Taper Roller Axle Retention and Material Options n1 1/2" O.D. to 1" O.D. tapers are standard with 5/16" hex axles nAll larger tapers are standard with 7/16" hex axles nAll tapers are available in spring or cotter pin retention nOther retention styles and axle sizes are available upon request

Taper Roller Sprocket Information (reference quote sheet drawing page 11) nSprockets available standard on 2 1/2" O.D. to 1 11/16" O.D. tapers nStandard sprockets are A-plate for 40 and 50 series chain nSprockets are placed on the large O.D. end as a standard. Sprockets can be placed anywhere along the length of the tube provided they are clear of the bearing and will not cause chain interference.

Taper Roller Groove Information (reference quote sheet drawing page 11) nNarrow grooves are available on 1 1/2" O.D. to 1" O.D. and 2 1/2" O.D. to 1 11/16" O.D. tapers nWide grooves are only available on 2 1/2" O.D. to 1 11/16" O.D. tapers nGrooves can only be placed on the tapered section of the roller provided they are clear of the bearing and are no more than 3 3/4" inches from the end of the tube

Customizing Rollers Flanges – Flanges can be welded to the tube to guide the product. Standard flanges are available for 1.9", 2 1/2", 2 9/16" and 3 1/2" O.D. rollers. Other sizes may be available upon request. Center Support Puck – Center support pucks can be installed in a roller to provide extra roller capacity at longer lengths. Pucks are available for most axles 11/16" hex and smaller. Ultrex Sleeves – Loose fitting Ultrex sleeves installed over sprocketed rollers are designed to be able to spin on the roller surface for low pressure accumulation applications. Boss – Steel plate designed to fit in the I.D. of the tube. As a standard, these plates are recessed into the tube and welded in place. The plate is designed to fit the corresponding bearing or to be welded directly to the axle. Heat Treat – All heavy-wall rollers (11 ga. and thicker) are available with a hardened tube surface. This provides extra resistance to surface wear and dents. Omni has two different heat treat standards. They are dependent on the length of the roller. nRollers up to 60" will be to a Rockwell C 58-62 Hardness with a Case Depth of .018"-.022" nRollers 60" to 84" will be to a minimum of Rockwell C 40 Hardness with a Case Depth of .035" nSpecial heat treat specifications may be available Finishes nZinc Plating – All mild steel roller tubes and axles are available in one of our two standard zinc plating colors; gold or silver/clear. Zinc plating is a highly corrosion resistant finish with aesthetic appeal. Other types of material plating may be available. nPowder Coat – A paint application process where a powder material is applied to the surface of the roller using an electrostatic charge. The applied powder is then heat cured to form a smooth, very durable finish. Available in a clear coat or any of Omni’s color options. nSand Blasting – Can be used to give a matte/non-reflective finish to the tube Special O.D.s (Straight Rollers) nStandard press fit bearings can be used with special O.D. tubes nBearings can be press fit directly into the tube if the tube wall is of sufficient thickness nIf the bearings do not fit directly into the tube a boss can be used nNeither design option can be used with crimp style bearings Special O.D.s (Taper Rollers) – Special large end and/or small end O.D.s can be manufactured upon request depending on the roller construction. nTapers can start as large as 5" O.D. and go down to 1" O.D. nSpecial tapers can be manufactured as true tapers to fit most radii nSpecial tapers can be made with no flat on the large end nSome special tapers are available with grooves. This is determined based on the size and length of the taper tube. Weld-Over Taper Shell – These tapered tubes are designed to fit over a straight roller and be welded in place. It is recommended that the small end of the taper is a minimum of 1/4" larger than the straight roller O.D.

General Information

Drill & Tap

Milled Flat Milled Slot

Threaded

Snap Ring Groove Turn Down

Concave Roller Sprocketed Hub

Bow-Tie Roller V-Groove Hub

Trapezoidal Crown Flanges

Special Tube Construction – Omni can provide special tube construction for many different applications. Below are some of the different tube construction options that are available.

Customizing Rollers Axle Machining – Omni can provide optional axle retention/machining. Below are some of the axle machining options that are available. (enlarged to show detail)

Drill and Tap (Female Thread) Threaded (Male Thread)

Milled Flat Milled Slot

Snap Ring Groove Turn Down

General Information

Stainless Steel Roller Information

Premium Class (P-Class) P-class rollers are made from all stainless steel components and are intended for use in frequent washdown, high corrosive and food processing applications. nManufactured with 304 stainless steel, mill finish materials (unless otherwise noted) nStainless steel or polymer roller bearings nWashdown rated nStainless steel sprockets and fasteners nFDA/USDA approved materials nContinuous MIG welds nRollers with thru-bore bearings are NOT water-tight; liquid may become trapped inside Additional Options - Polished stainless steel finishes - 316 stainless steel materials - Special "water-tight" roller designs utilizing blind bore bushings

Deluxe (D-Class) D-class rollers are made of combinations from corrosion-resistant material and carbon steel materials. They are intended for use in occasional washdown and low corrosive applications. nStandard roller designs (zinc plated, galvanized, PVC, stainless steel or aluminum tubing) nGeneral purpose roller bearings nGeneral purpose sprockets and chain nZinc plated fasteners nRollers with thru-bore bearings are NOT water-tight; liquid may become trapped inside

Surface Finishes Available Mill Finish – Also known as rolled or unpolished finish. A mill finish is a bright, smooth, semi-reflective and non-directional finish. Exact visual appearance can vary based on different grades and thicknesses of stainless steel. Pitting, scratches, welds and tool marks may be visible on the surface. If these blemishes are cleaned up they cannot be blended to recreate an original mill finish appearance. These reworked areas will remain apparent unless additional surface finishing operations are performed. Mill Finish is the standard finish for rollers unless otherwise requested by the customer.

Glass Bead Blasted Finish – Glass bead blasting produces a bright uniform matte or frosted finish with low reflectivity and no directionality. It reduces glare from shiny stainless steel while still retaining a smooth feel. Although the surface has a consistent look it may still contain pits and scratches. The maximum surface roughness is Ra of 125 micro-inches.

Sand Blasted Finish – Sand blasting is the same operation as glass bead blasting but uses a more abrasive medium. This produces a duller and less smooth finish than glass bead blasting. Similarly the surface may still contain pits and scratches.

Polished Finish – Also known as brushed or satin finish. A polished finish is the result of additional mechanical operations which include grinding, polishing and buffing that are intended to change the appearance and condition of stainless steel metal surfaces. The most common stainless steel cosmetic polished finish is described as a No. 4 finish. It is a bright, uni-directional finish with a visible "grain" which prevents mirror reflection. It is obtained by finishing with a 120-150 mesh abrasive, following initial grinding with coarser abrasives and has a surface roughness with a maximum Ra of 32 micro-inches. Areas where welds and tool marks were cleaned up can be blended or repaired by using the same or similar polishing methods that were used to create the original polished finish. Sprocketed rollers can only be polished on the effective width.

General Information

Stainless Steel Roller Information (continued)

Bushings (Roll End Bearings) Bushings, or Roll End Bearings, can be used in place of traditional ball bearings in rollers. In applications with speeds less than 150 FPM they offer many advantages. nNo moving parts to break down nNo lubrication to be washed away or dry out nEquivalent load capacity to ball bearings nFit in any tube size or tube material nCan be custom built for uncommon tube and axle size combinations nBlind bore designs with stub axles for “water-tight” rollers nFree-draining designs nAvailable in a wide variety of materials Based on the material they are made from bushings can be used in many applications. n Sanitary and food applications nHigh temperature applications (up to 550° F) nLow temperature applications (down to -50° F) nExcessively abrasive dust or debris applications nUnderwater applications nCorrosive environments

General Information

Bearing Selection Guide

WHY THIS BEARING?

Plastic

• Lowest capacity• No lubrication required• Capable of operating submerged in liquid• Not for use with high speeds or powered conveyor• Ideal for washdown with harsh detergents• Molded plastic bodies and stainless steel balls

Low LowLight Duty

Gravity Conveyor

CorrosiveWet High

Unground Crimped (Non-Precision)

• Most cost effective• Lowest coefficient of friction, easiest to turn• Zinc plated for mild corrosion resistance• Not for use with high speeds• Stamped metal housing with very loose tolerances• Full complement of balls which are not separated

Low LowGravity and Lineshaft Conveyor

Mild High

Unground Press Fit (Non-Precision)

• More capacity than crimped• Can be replaced for longer roller life• More sealing options available• Zinc plated for mild corrosion resistance• Stamped metal housing with very loose tolerances• Full complement of balls which are not separated

Medium MediumGravity and Powered Conveyor

Mild High

Semi-Precision

• More capacity than unground• Capable of higher speeds than unground• Superior seals over unground• Can be replaced for longer roller life• Machined metal housings with tighter tolerances • Ball retainer keeps the balls separated and evenly

spaced

Medium High

Medium High

Heavy Duty Gravity and Powered Conveyor

Dirty Medium

Poly Housed ABEC style (Precision)

• Most common ABEC style• Most cost effective ABEC style• Highest possible speeds• Long service life• Better seals than semi-precision

Medium Highest High Speed

Powered Conveyor

Mild Low

All Metal and Insert ABEC style (Precision)

• All metal parts• Best seals and shields available• Highest capacity possible• Can be replaced for longer roller life• Insert bearings feature set-screws to lock onto axle and

prevent side-to-side movement • High quality steel, heat treated to uniform hardness and

ground to a micro finish• Tightest tolerances available

Highest High

Heavy Duty Powered

and Gravity Conveyor

Very Dirty Low

Framesaver (Precision)

• Same benefits as Poly Housed ABEC• Uses tapered hex stub axle design• Axle fits tightly in worn frame holes• Prevents additional frame wear• Metal or plastic axles available

Medium HighHigh Speed

Powered Conveyor

Mild Lowest

Bushings

• No moving parts to wear out• Uncommon sizes available• Long service life• Heavy duty capacity at slow speeds• High temp materials available• Abrasion resistant material available• Food grade materials available

High Low Powered Conveyor All Medium

Capac

ity

Spee

dsNoi

se

Leve

l

Conve

yor

Type

s

Enviro

nmen

t

*The information provided on this bearing guide is for general reference only. There are many exceptions and we encourage you to contact our qualified staff to answer any questions you may have.For more detailed drawings and additional bearings reference our Bearing Index.

Coatings and SleevesDurometer Rubber Family Food Grade Family Millable Urethane Family Sleeve Family

RangeDurometer:Comparable

To

Cost effective, generic coating. Not recommended for non-marking

applications.

Used for food and non-marking applications.

Most durableEconomical, replaceable and suitable for numerous material

handling applications.*

HIG

HE

RH

arde

r, m

ore

resi

stan

t to

cutt

ing

and

tear

ing

95A: Solid Fork Lift Tires

95A Orange Millable Urethane

(MAX TEMP = 212°F)Most durable of all compounds

95A Black Millable Urethane

(MAX TEMP = 212°F)Same as above except black in color. Not

suitable for non-marking applications.

90A: Phone Cord

90A Black Aquaflex

(MAX TEMP = 275°F)Most common black rubber compound


(MAX TEMP = 212°F)Mid-range urethane compound

90A Green Urethane

(MAX TEMP = 185°F)Most durable sleeve option

80A: Shoe Heel

80A Black Neoprene

(MAX TEMP = 250°F)Meets some specific food grade requirements

80A Off-White Nitrile

(MAX TEMP = 230°F)Most durable food grade compound


(MAX TEMP = 212°F)Mid-range urethane compound

(available in red also)

83A Orange Urethane

(MAX TEMP = 185°F)Most common for roller coverings

(available in black also)

LOW

ER

Sof

ter,

bett

er c

ushi

on fo

r pr

oduc

t pro

tect

ion,

redu

ces

nois

ean

d m

ore

grip

for

driv

ing

forc

e

70A: Running Shoe Sole

70A Black Carboxylated Nitrile

(MAX TEMP = 275°F)Most common pulley lagging

70A Black Millable Urethane

(MAX TEMP = 212°F)Softest urethane compound Common for

pulley laggings

65-60A: Car Tire Tread

65A Black Aquaflex

(MAX TEMP = 275°F)Most common soft black rubber

60A Black Neoprene

(MAX TEMP = 250°F)Most commonly used in glass handling

60A Off-White Carboxylated Nitrile

(MAX TEMP = 275°F)Mid-range food grade compound

60A Gray Vinyl

(MAX TEMP = 160°F)Higher chemical resistance than

urethane sleeves

60A Black SBR

(MAX TEMP = 220°F)Softest back rubber compound

60A Off-White Neoprene

(MAX TEMP = 250°F)Same durometer as above but different

chemical resistances

40A: Pencil Eraser

40A Tan Natural Rubber

(MAX TEMP = 212°F)Softest of all compounds

ADDITIONAL OPTIONS AVAILABLE

Machined Bow-Tie Profile Millable Urethane Coated Rollers

TAPERED URETHANE SLEEVES nConvert standard straight rollers into tapered rollers

GROOVES nMultiple patterns available

PROFILES n Concave, convex, crowned, bow-tie and tapered

Red Urethane Coated 6” Rollers

*Installation tool available. Contact one of our customer service representatives for more information.

Company: ________________________________________________ Date: ______________________________Contact: ___________________________ Quote Due: _____________ Desired Delivery: _____________________Phone No.: _________________________ Contact Email: _______________________State:_______________ Omni Sales Contact: _________________________________________ Quote #: _______________________

Quantity: _________________Between Frame Width (BF): _____________ Overall Cone (OAC) (if roller is not in frame): ____________Roller Diameter: __________________ Wall Thickness (Gauge): _____________ Tube Material/Finish: __________________

Type of Bearing: ______________Axle Size: __________________ (Hex or Round)Axle Length: _______________ (or Standard)Pin Retained: ________ Spring Retained: ________Load Capacity Required: ______________

Note: Between Frame (BF) is the distance between the frames of the conveyor. The BF measurement is needed to ensure proper fit into the conveyor. If the roller is not in the conveyor provide the Overall Cone, the length of the roller from bearing tip to bearing tip. (See our Roller Measurement Guide for more information) Utilize the drawing below to depict more detailed specifications.

O.A.C.

BF

FR

AM

E

AXLE

FR

AM

E

WALLOD x

1/16 (TYP)

P.O. Box 352 n Alpena, Michigan 49707Phone 989.358.7000

Fax [email protected]

Proposal Drawing Required: ❏ Yes ❏ No

Gravity Roller Quotation Worksheet

P.O. Box 352 n Alpena, Michigan 49707Phone 989.358.7000Fax [email protected]


Quantity: _________________Between Frame Width (BF): _____________ Overall Cone (OAC) (if roller is not in frame): ____________Roller Diameter: __________________ Wall Thickness (Gauge): _____________ Tube Material/Finish: __________________Type of Bearing: ______________

Axle Size: __________________ (Hex or Round)Axle Length: _______________ (or Standard)Pin Retained: ________ Spring Retained: ________Sprocket Size: ______________Load Capacity Required: ______________


O.A.C.

BF

FR

AM

E

AXLE

FR

AM

E

WALLOD x

CLCL

1/16 (TYP)

SPROCkETS


Sprocketed Roller Quotation Worksheet


Quantity: _________________Between Frame Width (BF): _____________ Overall Cone (OAC) (if roller is not in frame): ____________Roller Diameter: __________________ Wall Thickness (Gauge): _____________Tube Material/Finish: __________________ Type of Bearing: ______________

Axle Size: __________________ (Hex or Round)Axle Length: _______________ (or Standard)Pin Retained: ________ Spring Retained: ________Groove Center Line: _____________ Load Capacity Required: ______________



Fax [email protected]

O.A.C.

BF

FR

AM

E

AXLE

FR

AM

E

WALLOD x

CLCL

1/16 (TYP)


Grooved Roller Quotation Worksheet

OAC

BF

1/16" (TYP)

FLAT

OAC-CLCL-CLCL-CL

OAC-CL CL-CL

OAC-CL

CL-CL


Quantity: _________________Between Frame Width (BF): _____________ Overall Cone (OAC) (if roller is not in frame): ____________Roller Diameter at Small End: ____________ Roller Diameter at Large End: ____________ Wall Thickness (Gauge): _____________ Tube Material/Finish: __________________ Type of Bearing: ______________

Axle Size: __________________ (Hex or Round)Axle Length: _______________ (or Standard)Pin Retained: ________ Spring Retained: ________Groove Center Line: _____________ (if applicable) Sprocket Size: _____________(if applicable) Flat Length: _____________(if applicable)Load Capacity Required: ______________

GRAVITY TAPER

WELD-OVER POWER TAPER

Note: Between Frame (BF) is the distance between the frames of the conveyor. The BF measurement is needed to ensure proper fit into the conveyor. The BF dimension allows 1/16" clearance between the extension on the bearing and the side frame at each end. If the roller is not in the conveyor provide the Overall Cone, the length of the roller from bearing tip to bearing tip. (See our Roller Measurement Guide for more information) Utilize the drawings below to depict more detailed specifications. The small diameter end of a taper is meant to be installed higher in the frame than the large diameter end. The top of the tapered surface of the tube should be horizontal. The locations of features like sprockets, grooves, tapered shells and flats should be measured from the nearest bearing tip or OAC. Measurements should always be parallel with the axle to ensure proper location.

POWER TAPER GROOVED TAPER


OAC

BF

1/16" (TYP)

FLAT

OAC-CLCL-CLCL-CL

OAC-CL CL-CL

OAC-CL

CL-CL

OAC

BF

1/16" (TYP)

FLAT

OAC-CLCL-CLCL-CL

OAC-CL CL-CL

OAC-CL

CL-CL

OAC

BF

1/16" (TYP)

FLAT

OAC-CLCL-CLCL-CL

OAC-CL CL-CL

OAC-CL

CL-CL

P.O. Box 352 n Alpena, Michigan 49707Phone 989.358.7000Fax [email protected]

Tapered Roller Quotation Worksheet

STRAIGHT ROLLERS

1 in. O.D. x 16 ga. RollersRoller Part Number

Tube Material Axle Drive

OptionsBearing Part

NumberSpring Retained

Pin Retained

29933 Upon Request Mild Steel 1/4 Dia. Gravity 102245-O

38246 29934 Mild Steel 5/16 Dia. Gravity 102272-O

20747 20677 Mild Steel 5/16 Hex Gravity102152-O

44983 Upon Request Galvanized 5/16 Hex Gravity

Roller Capacity Chart (lbs.)*

Between Frame(BF) Inches

Bearing Part Number

102245-O 102272-O 102152-O

6 60 60 609 60 60 6012 59 59 5915 59 59 5918 59 59 5921 59 59 5924 51 59 5927 43 59 5930 37 58 5833 31 58 5836 25 58 5839 20 58 58

1 in. Pipe Rollers (1.315 in. O.D.)Roller Part Number


OptionsBearing Part


Pin Retained

44849 Upon Request SCH 40 PVC** 7/16 Hex Gravity 102177-O

102152-O Unground Press Fit



3/16

3/16

3/16

*The dimension above include 1/16" clearance between the extension on the bearing and the side frame at each end.


3/16

*Roller 20747 stock options available.



Bearing Part Number

102177-OSCH 40 PVC**

6 1509 9212 6715 5318 4421 3724 2927 2330 1833 1536 1239 10

Standard Part Numbering SystemExample: 27369 - 17

Roller Part Number

BFUnground Semi-Precision Semi-Precision

Stainless SteelPrecision Precision

Stainless SteelPlastic Seals Shields Ball Retainer

(Cage)Keeper

BarUnground

Stainless Steel

*Larger Between Frames and higher capacities may be achieved with a center support puck. *Roller Between Frame lengths available between values shown in the table.*Roller Between Frames can be shorter than values shown utilizing pin retention.**PVC Pipe is industrial grade. At longer lengths T.I.R. cannot be guaranteed.


Roller Part Number

BF

STRAIGHT ROLLERS

Unground Semi-Precision Semi-Precision Stainless Steel

Precision Precision Stainless Steel

Plastic Seals Shields Ball Retainer (Cage)

Keeper Bar

Unground Stainless Steel

*Larger Between Frames and higher capacities may be achieved with a center support puck. *Roller Between Frame lengths available between values shown in the table.*Roller Between Frames can be shorter than values shown utilizing pin retention.

114231-O Plastic Housed Precision

114231-GP & 114233-O



Bearing Part Number

115901-O 114234-O102228-O

102228-GP114233-O

114231-GP

6 94 142 120 2959 93 114 119 29412 74 83 119 25215 58 65 119 19818 47 53 119 16221 39 44 119 13624 32 37 107 11727 27 31 92 10130 23 26 80 8833 19 22 70 7736 15 18 61 6739 12 14 53 58

102228-O/GP Unground Crimped


115901-O Unground Crimped

1/4

9/32

1/4



114231-GP & 114233-O

1/4

1 3/8 in. O.D. x 18 ga. RollersRoller Part Number


OptionsBearing Part


Pin Retained

25898 Upon Request Aluminum 1/4 Dia. Gravity115901-O

25904 Upon Request Galvanized 1/4 Dia. Gravity

42411 Upon Request Galvanized 1/4 Dia. Gravity 114234-O

26356 28740 Galvanized 5/16 Hex Gravity 102228-O

28122 29190 Galvanized 5/16 Hex 1 Groove102228-GP

28123 29191 Galvanized 5/16 Hex 2 Grooves


42369 42370 Galvanized 5/16 Hex Gravity

114231-GP42375 42377 Galvanized 5/16 Hex 1 Groove


*Roller 25898 and 25904 stock options available.

1/4


Roller Part Number

BF

STRAIGHT ROLLERS




Keeper Bar



1 3/8 in. OD x 16 Ga. RollersRoller Part Number


OptionsBearing Part


Pin Retained


39622 28481 Mild Steel 1/4 Hex Gravity 102178-O



29192 29194 Mild Steel 5/16 Hex 1 Groove102228-GP

29193 29195 Mild Steel 5/16 Hex 2 Grooves



Bearing Part Number

115901-O 102178-O 102241-O 102228-O 102228-GP

6 94 94 94 1209 93 93 93 11912 74 80 93 11915 58 62 93 11918 47 50 93 11921 38 42 86 11824 32 35 73 10627 27 29 63 9230 22 25 54 8033 18 20 47 6936 15 17 40 6039 12 13 34 52




9/32

1/4



1/4

1/4


Roller Part Number

BF

STRAIGHT ROLLERS




Keeper Bar



1 3/8 in. OD x 16 Ga. RollersRoller Part Number


OptionsBearing Part


Pin Retained



102274-GP38573 Upon Request Galvanized 5/16 Hex 1 Groove

38572 Upon Request Galvanized 5/16 Hex 2 Grooves


41509 41510 Mild Steel 5/16 Hex Gravity

114231-GP

42355 42353 Mild Steel 5/16 Hex 1 Groove



42389 42391 Galvanized 5/16 Hex 1 Groove


114231-GP Plastic Housed Precision

114231-GP & 114233-O


114231-GP & 114233-O

102274-O/GP Semi-Precision

1/4

1/4


9/32



Bearing Part Number

102274-O 102274-GP

114233-O 114231-GP

6 288 2959 251 29412 184 25215 144 19818 117 16221 98 13624 83 11627 71 10030 61 8733 52 7636 44 6639 37 57



Roller Part Number

BF

STRAIGHT ROLLERS




Keeper Bar



1 3/8 in. O.D. x 3/16 Wall RollersRoller Part Number


OptionsBearing Part


Pin Retained



102046-GP29196 29198 Mild Steel 5/16 Hex 1 Groove




11336543766 Upon Request Mild Steel 5/16 Hex 1 Groove

43767 Upon Request Mild Steel 5/16 Hex 2 Grooves


113365-O/113365 Semi-Precision

102046-GP Unground Press Fit


7/32

9/32



114231-GP & 114233-O

1/4

7/32



Bearing Part Number

102043-O 102046-GP113365-O

113365114233-O

6 149 149 287 2949 148 148 249 29312 148 148 182 25015 147 147 142 19618 147 138 115 16021 135 115 95 13424 115 98 80 11327 98 83 67 9730 85 72 57 8433 73 61 48 7236 63 52 40 6239 53 44 32 5342 45 37 25 4445 37 30 19 3648 29 23 12 29


Roller Part Number

BF

STRAIGHT ROLLERS




Keeper Bar





3/16



Bearing Part Number

114231-GP 102173-GP 102176-GP 102126-O 102172-GP

6 294 149 149 149 1499 293 148 148 148 148

12 250 148 148 148 14815 196 147 147 147 14718 160 146 147 147 14621 134 146 146 146 14624 113 145 145 145 14527 97 145 145 145 14530 84 144 144 144 14433 72 144 138 144 14436 62 143 122 143 14339 53 134 107 142 14242 44 117 94 142 14245 36 102 82 138 14148 29 87 62 104 141




3/16

11/32

114231-GP & 114233-O

1/4


11/32



OptionsBearing Part


Pin Retained




38186 28488 Mild Steel 3/8 Dia. Gravity 102173-GP

38188 28489 Mild Steel 3/8 Hex Gravity 102176-GP




Roller Part Number

BF

STRAIGHT ROLLERS




Keeper Bar




3/8

1 5/8 in. O.D. x 14 ga. RollersRoller Part Number


OptionsBearing Part


Pin Retained









Bearing Part Number

102145-O 102180-O102052-O

102053-GP114235-GP 102181-O

6 228 289 289 525 2899 227 289 289 523 289

12 197 289 289 522 28915 154 288 288 507 28818 125 264 288 416 28821 105 223 288 351 28824 89 191 287 302 28727 77 166 287 264 28730 66 146 278 233 28733 57 128 247 207 28636 49 113 221 185 28639 42 100 198 166 28342 36 88 178 148 25545 30 77 159 133 23048 24 67 142 118 20851 N/A 58 126 105 18754 N/A 49 112 93 16757 N/A 40 98 81 14960 N/A 32 84 70 13263 N/A 23 71 59 11566 N/A N/A 59 48 9969 N/A N/A 47 38 8372 N/A N/A 34 27 6875 N/A N/A N/A N/A 5378 N/A N/A N/A N/A 37



3/8

3/8



3/8


3/8

114235-GP Plastic Housed Precision114235

1/2


Roller Part Number

BF

STRAIGHT ROLLERS




Keeper Bar




3/8

1 3/4 in. O.D. x 10 Ga. RollersRoller Part Number


OptionsBearing Part


Pin Retained









Bearing Part Number

102145-O 102180-O102052-O

102053-GP114235-GP 102181-O

6 228 289 289 524 2899 226 288 288 523 288

12 196 288 288 521 28815 153 287 287 506 28718 124 263 287 414 28721 103 221 286 349 28624 87 189 286 301 28627 75 164 285 262 28530 64 143 276 231 28433 55 126 245 205 28436 47 111 218 182 28339 39 97 195 163 28042 32 85 174 145 25245 26 74 156 129 22748 20 63 138 115 20451 N/A 54 122 101 18354 N/A 44 107 89 16357 N/A 35 93 77 14560 N/A 27 80 65 12763 N/A 18 66 54 11066 N/A N/A 54 43 9469 N/A N/A 41 33 7872 N/A N/A 29 22 6275 N/A N/A N/A N/A 4778 N/A N/A N/A N/A 32




3/8

3/8


3/8


3/8

114235-GP Plastic Housed Precision114235

1/2


Roller Part Number

BF

STRAIGHT ROLLERS




Keeper Bar




13/64



OptionsBearing Part


Pin Retained










102259-O Unground Crimped102259


13/64

13/64



13/64

13/64


13/64



Bearing Part Number

102188-O 102259-O 102248-O 102293-O 102292-O115899-O

115899-GP

6 167 269 269 269 269 2699 132 269 269 269 269 269

12 96 223 268 268 268 26815 75 175 215 268 268 26818 60 143 176 267 267 26721 49 119 147 254 267 26724 41 101 126 218 266 26627 34 87 108 189 234 26630 28 75 93 165 205 26633 22 64 81 145 181 26536 18 55 70 128 160 26539 13 46 60 112 142 24042 N/A 39 51 98 125 21545 N/A 31 42 85 110 19348 N/A 25 34 73 95 17251 N/A N/A N/A 62 82 15354 N/A N/A N/A 51 69 13557 N/A N/A N/A 40 57 11860 N/A N/A N/A 30 45 10263 N/A N/A N/A 20 34 8666 N/A N/A N/A N/A N/A 7169 N/A N/A N/A N/A N/A 5672 N/A N/A N/A N/A N/A 4175 N/A N/A N/A N/A N/A 27


Roller Part Number

BF

STRAIGHT ROLLERS




Keeper Bar



114206-GP Framesaver

7/16



Bearing Part Number

102279-O 114208-O 114135-GP 114206-GP 102255-O

6 269 501 501 NA 2699 269 499 499 209 269

12 268 498 498 208 26815 268 485 485 208 26818 267 397 397 207 26721 267 335 335 207 26724 266 288 288 207 26627 266 251 251 206 26630 266 222 222 206 26633 265 197 197 205 26536 265 175 175 205 26539 264 157 157 204 26442 251 140 140 204 26445 225 125 125 203 26348 201 111 111 203 26351 179 98 98 202 26254 158 86 86 202 23757 138 75 75 202 21160 120 64 64 201 18763 101 53 53 201 16366 84 43 43 200 14069 67 33 33 200 11872 50 23 23 192 9775 33 N/A N/A 175 7678 N/A N/A N/A 160 5581 N/A N/A N/A 147 34 114135-GP Plastic Housed Precision



13/32

13/32



13/64

13/641 7/8 in. O.D. x 13 Ga. RollersRoller Part Number


OptionsBearing Part


Pin Retained






42256 N/A Mild Steel 7/16 Hex Gravity

114206-GP42262 N/A Mild Steel 7/16 Hex 1 Groove

42267 N/A Mild Steel 7/16 Hex 2 Grooves



Roller Part Number

BF

STRAIGHT ROLLERS




Keeper Bar




13/64

1.9 in. O.D. x 16 Ga. RollersRoller Part Number


OptionsBearing Part


Pin Retained






Upon Request 24877 Mild Steel 7/16 Hex Gravity115899-O




Bearing Part Number

102188-O 102259-O 102248-O 102293-O 102292-O 115899-O

6 167 269 269 269 269 2699 133 269 269 269 269 269

12 97 224 269 269 269 26915 75 176 216 268 268 26818 61 144 177 268 268 26821 50 120 148 255 268 26824 42 102 127 219 267 26727 35 88 109 190 235 26730 29 76 95 167 207 26733 24 66 82 147 183 26736 19 56 72 129 162 26639 15 48 62 114 143 24242 N/A 41 53 100 127 21745 N/A 33 44 87 112 19548 N/A 27 37 75 97 17451 N/A N/A N/A 64 84 15554 N/A N/A N/A 53 72 13757 N/A N/A N/A 43 60 12060 N/A N/A N/A 33 48 10463 N/A N/A N/A 23 36 8966 N/A N/A N/A N/A N/A 7469 N/A N/A N/A N/A N/A 5972 N/A N/A N/A N/A N/A 4475 N/A N/A N/A N/A N/A 30


102259-O Unground Crimped102259


13/64

13/64


13/64


13/64


13/64


Roller Part Number

BF

STRAIGHT ROLLERS




Keeper Bar





Bearing Part Number

115899-GP 102279-O 114208-O 114135-GP

6 269 269 501 5019 269 269 500 500

12 269 269 498 49815 268 268 485 48518 268 268 398 39821 268 268 336 33624 267 267 289 28927 267 267 253 25330 267 267 223 22333 267 267 198 19836 266 266 177 17739 242 266 158 15842 217 253 142 14245 195 227 127 12748 174 203 113 11351 155 181 100 10054 137 161 89 8957 120 141 77 7760 104 122 67 6763 89 104 56 5666 74 87 46 4669 59 70 36 3672 44 53 27 2775 30 36 N/A N/A



115899-GP Unground Crimped

13/64

13/32



13/64

13/32

*Roller 23616, 26157, 37824 and 37825 stock options available.



OptionsBearing Part


Pin Retained

23616 Upon Request Mild Steel 7/16 Hex Gravity

115899-GP




37824 Upon Request Galvanized 7/16 Hex 1 Groove

37825 Upon Request Galvanized 7/16 Hex 2 Grooves





114135-GP42072 42071 Galvanized 7/16 Hex Gravity




Roller Part Number

BF

STRAIGHT ROLLERS




Keeper Bar





Bearing Part Number


Bearing Part Number

114206-GP 102255-O 114206-GP 102255-O

6 NA 269 45 205 2659 209 269 48 205 265

12 209 269 51 205 26515 208 268 54 204 23918 208 268 57 204 21421 208 268 60 204 18924 208 267 63 192 16627 207 267 66 174 14330 207 267 69 158 12133 207 267 72 144 10036 206 266 75 131 7939 206 266 78 120 5842 206 266 81 111 38




13/64


13/64


13/32

7/16



OptionsBearing Part


Pin Retained


44896 Upon Request Mild Steel 7/16 Hex Gravity 114135-GP



Bearing Part Number

115899-GP 114135-GP

6 269 50112 268 49718 267 39724 266 28830 265 22136 264 17442 214 13948 171 11054 134 8560 100 6266 69 4272 39 22



OptionsBearing Part


Pin Retained


114206-GP42210 N/A Galvanized 7/16 Hex Gravity

42212 N/A Galvanized 7/16 Hex 1 Groove

42213 N/A Galvanized 7/16 Hex 2 Grooves

37818 28429 Mild Steel 1/2 Dia. Gravity102255-O

45030 Upon Request Galvanized 1/2 Dia. Gravity


Roller Part Number

BF

STRAIGHT ROLLERS




Keeper Bar




102155-GP Semi-Precision


102051-O/GP Unground Press Fit

9/32

9/32

13/32

Regreasable (RG)



OptionsBearing Part


Pin Retained


Upon Request 39486 Galvanized 7/16 Hex Gravity

44897 Upon Request Mild Steel 7/16 Hex Gravity

102051-GP



38209 38208 Mild Steel 7/16 Hex 40A18 Sprockets






44912 44911 Galvanized 7/16 Hex 40A18 Sprockets



42026 N/A Mild Steel 7/16 Hex (RG) Gravity 113500-GP


102155-GP








Between Frame (BF) Inches

Bearing Part Number

102051-O 102051-GP 113500-GP 102155-GP

6 299 602 56512 297 598 51818 296 473 33124 295 343 23830 292 264 18136 231 208 14042 184 166 10848 146 131 8154 113 101 5760 83 74 3563 69 61 2566 55 49 N/A72 29 25 N/A



Roller Part Number

BF

STRAIGHT ROLLERS




Keeper Bar





13/32


13/32

114621-GP All Metal Precision

9/32



Bearing Part Number

114208-O 114135-GP 114621-GP

6 500 500 68112 497 497 61718 396 396 39724 286 286 28630 219 219 21836 173 173 16942 137 137 13148 107 107 9954 82 82 7160 59 59 4563 49 49 3366 38 38 N/A



OptionsBearing Part


Pin Retained




114135-GP










114621-GP













Roller Part Number

BF

STRAIGHT ROLLERS




Keeper Bar







7/16

15/32

15/32



OptionsBearing Part


Pin Retained


114206-GP

42246 N/A Mild Steel 7/16 Hex 1 Groove


42228 N/A Galvanized 7/16 Hex Gravity

42248 N/A Galvanized 7/16 Hex 1 Groove

42249 N/A Galvanized 7/16 Hex 2 Grooves

N/A 28508 Mild Steel 5/8 Dia. Gravity 102187-GP

N/A 28509 Mild Steel 3/4 Dia. Gravity 102186-GP



Bearing Part Number

114206-GP 102187-GP 102186-GP

6 N/A 700 70012 207 700 70018 206 700 70024 205 565 70030 203 436 70036 202 348 70042 201 282 61748 199 229 51454 198 183 42960 197 143 35663 196 125 32266 195 107 29072 194 72 23078 193 39 17484 191 N/A 12090 169 N/A 68


7/16


9/321 1/2 in. Pipe Rollers (1.9 in. O.D.)Roller Part Number


OptionsBearing Part


Pin Retained

28783 28784 SCH 40 PVC** 7/16 Hex Gravity

102051-O44546 44547 SCH 80 PVC** 7/16 Hex Gravity

27369 Upon Request SCH 40 Aluminum 7/16 Hex Gravity

42290 Upon Request SCH 40 Aluminum 7/16 Hex Gravity 114208-O

42289 Upon Request SCH 40 Aluminum 7/16 Hex Gravity 114135-GP

42291 Upon Request SCH 40 Aluminum 7/16 Hex Gravity 114206-GP



13/32

13/32



Roller Part Number




(Cage)Keeper

BarUnground

Stainless Steel

*Larger Between Frames and higher capacities may be achieved with a center support puck. *Roller Between Frame lengths available between values shown in the table.*Roller Between Frames can be shorter than values shown utilizing pin retention.**PVC Pipe is industrial grade. At longer lengths T.I.R. cannot be guaranteed.



Bearing Part Number

102051-OSCH 40 PVC

102051-OSCH 80 PVC

102051-OAluminum

114208-O114135-GPAluminum

114206-GPAluminum

6 300 300 300 501 N/A12 163 206 299 498 20918 107 135 299 398 20924 79 100 298 289 20830 62 79 296 223 20836 44 55 236 177 20742 31 39 190 143 20748 23 29 153 114 20654 17 22 121 90 17460 13 17 92 68 13963 N/A N/A 78 58 12566 N/A N/A 65 48 11372 N/A N/A 40 28 9378 N/A N/A N/A N/A 7884 N/A N/A N/A N/A 6690 N/A N/A N/A N/A 56

** **


Roller Part Number

BF

STRAIGHT ROLLERS




Keeper Bar



2 in. O.D. x 16 Ga. RollersRoller Part Number


OptionsBearing Part


Pin Retained






Bearing Part Number

115902-O 115902-GP

6 26912 26918 26824 26730 26736 26642 21748 17454 13760 10466 7372 4475 30



OptionsBearing Part


Pin Retained






Bearing Part Number

102040-O 102040-GP

6 37912 37818 37824 34030 26236 20842 16648 13354 10360 7766 5372 30



3/8


13/64


Roller Part Number

BF

STRAIGHT ROLLERS




Keeper Bar





OptionsBearing Part


Pin Retained




OptionsBearing Part


Pin Retained






114621-GP







Bearing Part Number

114208-O 114135-GP 114621-GP

6 500 500 68112 496 496 61618 395 395 39624 285 285 28530 217 217 21636 170 170 16742 134 134 12848 104 104 9654 79 79 6760 56 56 4163 45 45 2966 34 34 N/A



112798-O All Metal Precision

13/32

13/32



3/16

9/32



Bearing Part Number


Bearing Part Number

112789-O 112789-O

6 700 54 51712 700 60 41418 700 66 33924 700 72 28130 700 78 23636 700 84 15942 700 90 8348 660


Roller Part Number

BF

STRAIGHT ROLLERS




Keeper Bar





Bearing Part Number

114206-GP 102191-GP

6 N/A 70012 207 70018 205 70024 203 70030 202 70036 201 70042 200 70048 198 70054 196 59760 195 49263 193 44466 191 39872 189 31178 188 23084 186 15190 184 75



OptionsBearing Part


Pin Retained




Bearing Part Number

44832-O

6 22712 19618 12424 8730 6436 4742 3348 20

1/8

3/8





21/64

3/16

7/16



OptionsBearing Part


Pin Retained


114206-GP42282 N/A Mild Steel 7/16 Hex 1 Groove


37821 37820 Mild Steel 11/16 Hex 40A18 Sprockets102191-GP



Roller Part Number

BF

STRAIGHT ROLLERS




Keeper Bar




5/16

102312 Unground Crimped



21/64


21/64


21/64


5/16

21/64



Bearing Part Number

44834-O102311 102312

114734-GP 44836-O 114735-GP

6 289 289 510 289 59912 288 288 470 288 59818 263 287 300 287 42124 189 286 216 286 30530 143 276 164 285 23336 111 218 127 284 18342 85 174 98 252 14448 64 139 74 204 11354 45 108 52 163 8560 27 80 33 127 6063 N/A 67 24 110 4866 N/A 54 N/A 94 3672 N/A 29 N/A 63 N/A78 N/A N/A N/A 33 N/A



OptionsBearing Part


Pin Retained


11502 11498 Mild Steel 7/16 Hex Gravity 102311






Roller Part Number

BF

STRAIGHT ROLLERS




Keeper Bar





OptionsBearing Part


Pin Retained




OptionsBearing Part


Pin Retained






Bearing Part Number

102047-O

12 44724 44336 44048 43660 35072 23584 13596 42




21/64

21/64



21/64

3/8



Bearing Part Number

44833-O 44835-O 102309

6 227 289 28912 196 288 28818 124 263 28724 87 189 28630 64 143 27636 47 111 21842 33 85 17548 21 64 13954 N/A 45 10860 N/A 27 8066 N/A N/A 5472 N/A N/A 30


Roller Part Number

BF

STRAIGHT ROLLERS




Keeper Bar




17/32



Bearing Part Number

102310 114197-GP 44837-O 114198-GP 114199-GP

6 289 441 289 599 59912 288 438 288 598 59818 287 352 287 597 59724 286 254 286 596 59630 276 195 285 595 59536 218 153 284 594 59442 175 122 252 572 59348 139 96 204 480 59254 108 73 164 405 59160 80 53 128 340 52366 54 35 94 283 44472 30 N/A 63 231 37378 N/A N/A 33 183 30784 N/A N/A N/A 137 24690 N/A N/A N/A 93 18796 N/A N/A N/A 50 131102 N/A N/A N/A N/A 76




17/32



17/32

21/64



OptionsBearing Part


Pin Retained






21/64


Roller Part Number

BF

STRAIGHT ROLLERS




Keeper Bar




17/32



OptionsBearing Part


Pin Retained


45025 Upon Request 10 ga. Galvanized 5/16 Hex Gravity



11522 11525 Mild Steel 7/16 Hex Gravity102309

44989 44988 10 ga. Galvanized 7/16 Hex Gravity

11521 11526 Mild Steel 7/16 Hex Gravity102310



44993 44992 10 ga. Galvanized 7/16 Hex Gravity 102249-GP

42304 42303 Mild Steel 7/16 Hex Gravity114193-GP





21/64


21/64


9/32



Bearing Part Number

44833-O 44835-O 102309 102310

102249-O 102249-GP 114193-GP

6 227 289 289 506 44112 195 287 287 503 43718 123 262 286 400 35024 86 187 284 289 25230 62 141 274 221 19236 44 108 216 173 15042 30 82 171 137 11848 N/A 60 135 107 9254 N/A 41 104 81 6960 N/A 23 76 58 4966 N/A N/A 49 36 3072 N/A N/A 24 N/A N/A


21/64

21/64


Roller Part Number

BF

STRAIGHT ROLLERS




Keeper Bar




13/32



OptionsBearing Part


Pin Retained

37944 28530 Mild Steel 1/2 Dia. Gravity44837-O

45027 Upon Request 10 ga. Galvanized 1/2 Dia. Gravity







102054-GP40978 42465 10 ga. Galvanized 11/16 Hex Gravity







9/32

17/32


21/64


17/32





Bearing Part Number

44837-O 102195-O 102130-GP 114195-GP 102054-GP 102055-GP

6 289 700 700 599 649 64912 287 700 700 597 647 64718 286 560 700 596 646 64624 284 407 700 594 644 64430 283 313 700 593 642 64336 281 249 589 591 641 64142 249 200 486 569 639 64048 201 160 407 477 638 63854 160 127 341 401 636 63660 123 97 285 336 635 62666 89 69 235 278 633 53172 58 43 190 226 579 44578 27 N/A 148 177 477 36684 N/A N/A 108 130 383 29290 N/A N/A 70 86 292 22296 N/A N/A 32 42 205 153

102 N/A N/A N/A N/A 119 87108 N/A N/A N/A N/A 35 N/A

9/32


Roller Part Number

BF

STRAIGHT ROLLERS




Keeper Bar





OptionsBearing Part


Pin Retained

Upon Request 11583 Mild Steel 11/16 Hex (RG) Gravity 102056-GP


102041-GP









44924 44923 10 ga. Galvanized 11/16 Hex 40A21 Sprockets




42027 21331 Mild Steel 11/16 Hex (RG) Gravity 102229-GP


102139-GP








Bearing Part Number

102056-GP 102041-GP 102229-GP 102139-GP

6 649 700 700 70012 647 700 700 70018 646 700 700 70024 644 700 700 70030 643 700 700 70036 641 700 700 70042 640 700 700 70048 638 612 612 70054 636 520 520 70060 626 441 441 59366 531 373 373 48972 445 311 311 39478 366 255 255 30584 292 201 201 22090 22 151 151 13796 153 102 102 56102 87 54 54 N/A




17/32

17/32


102139-GP Semi Precision

1/4

13/32

Regreasable (RG)

Regreasable (RG)



Roller Part Number

BF

STRAIGHT ROLLERS




Keeper Bar





Bearing Part Number

114196-GP 114128-GP 102273-GP

6 599 700 70012 597 700 70018 596 700 70024 594 700 70030 593 700 70036 591 700 70042 590 700 70048 588 700 70054 587 700 70060 518 593 70066 439 489 59972 367 394 50678 301 305 42184 239 220 34290 180 137 26796 123 56 194102 68 N/A 124108 N/A N/A 54



OptionsBearing Part


Pin Retained






114128-GP












Upon Request 29931 Mild Steel 3/4 Dia. Gravity102273-GP

Upon Request 45029 10 ga. Galvanized 3/4 Dia. Gravity




1/4

9/32


17/32


Roller Part Number

BF

STRAIGHT ROLLERS




Keeper Bar





OptionsBearing Part


Pin Retained

N/A 28533 Mild Steel 3/4 Dia. (RG) Gravity 102194-GP




OptionsBearing Part


Pin Retained





Bearing Part Number

102195-O 102054-GP

6 713 64812 708 64618 558 64324 404 64130 310 63936 244 63642 195 63448 154 63254 120 63060 89 62766 61 62572 34 56978 N/A 46884 N/A 37290 N/A 28196 N/A 192102 N/A 106




9/32

9/32



9/32

17/32

Regreasable (RG)



Bearing Part Number


Bearing Part Number

102194-GP 102268-GP 102194-GP 102268-GP

6 609 700 66 501 70012 607 700 72 423 58418 606 700 78 351 49324 604 700 84 284 42030 603 700 90 220 36136 601 700 96 159 27842 600 700 102 99 19648 598 700 108 41 11654 597 700 112 N/A 5260 588 700


Roller Part Number

BF

STRAIGHT ROLLERS




Keeper Bar





Bearing Part Number

102055-GP 102056-GP 102041-GP 102229-GP

6 648 648 848 84812 646 646 846 84618 643 643 844 84424 641 641 841 84130 639 639 839 83936 637 637 837 83742 634 634 721 72148 632 632 606 60654 630 630 513 51360 619 619 434 43466 523 523 365 36572 436 436 302 30278 357 357 245 24584 282 282 191 19190 210 210 139 13996 141 141 89 89102 74 74 41 41




13/32

17/32


13/32

Regreasable (RG)


17/32

Regreasable (RG)



OptionsBearing Part


Pin Retained




102041-GP







Roller Part Number

BF

STRAIGHT ROLLERS




Keeper Bar





Bearing Part Number

102139-GP 114128-GP 102194-GP 102273-GP

6 2224 2800 608 84812 2222 2790 606 84618 2219 2596 604 84324 1910 1910 601 84130 1496 1496 599 83936 1214 1214 597 83642 1005 1005 594 83448 840 840 592 83254 703 703 590 81360 586 586 580 69466 481 481 492 59072 385 385 413 49778 295 295 341 41284 209 209 273 33290 126 126 209 25696 44 44 147 182102 N/A N/A 87 111




1/4

17/32



9/32

1/4

Regreasable (RG)



OptionsBearing Part


Pin Retained


102139-GP42060 42059 Mild Steel 11/16 Hex 40A22 Sprockets




114128-GP





N/A 28538 Mild Steel 3/4 Dia. (RG) Gravity 102194-GP

Upon Request 29937 Mild Steel 3/4 Dia. Gravity 102273-GP


Roller Part Number

BF

STRAIGHT ROLLERS




Keeper Bar





OptionsBearing Part


Pin Retained





1/4


17/32



Bearing Part Number

45150-GP 45149-GP

6 848 279912 847 279018 845 259624 843 191130 841 149836 839 121642 723 100748 609 84354 516 70760 438 59066 369 48672 307 39078 250 30184 197 21690 146 13396 96 52102 48 N/A


Roller Part Number

BF

STRAIGHT ROLLERS




Keeper Bar





OptionsBearing Part


Pin Retained





Upon Request 40810 Mild Steel 11/16 Hex Gravity 45208-GP

Upon Request 45260 Mild Steel 3/4 Dia. Gravity 45171-GP



Bearing Part Number

45173-GP 45207-GP 3143945208-GP 44881-GP 45171-GP

6 504 847 847 1997 84712 499 844 844 1994 84418 394 841 841 1991 84124 282 838 838 1906 83830 212 719 835 1491 83436 163 578 831 1208 83142 125 474 714 998 82848 93 393 599 832 82554 66 326 504 695 80460 41 268 424 576 68466 N/A 217 354 470 58072 N/A 170 291 373 48578 N/A 126 232 282 39984 N/A 84 177 196 31890 N/A 44 125 111 24196 N/A N/A 74 N/A 167102 N/A N/A N/A N/A 95108 N/A N/A N/A N/A N/A114 N/A N/A N/A N/A N/A120 N/A N/A N/A N/A N/A126 N/A N/A N/A N/A N/A132 N/A N/A N/A N/A N/A138 N/A N/A N/A N/A N/A144 N/A N/A N/A N/A N/A




9/32


Regreasable (RG) Optional


9/32


7/32

31439 Unground Press Fit

17/32

17/32

17/32


Roller Part Number

BF

STRAIGHT ROLLERS




Keeper Bar




5/16


7/16




OptionsBearing Part


Pin Retained

Upon Request 45261 Mild Steel 3/4 Hex Gravity 45172-GP

N/A 45055 Mild Steel 1-1/16 Hex Gravity

45053-GPN/A 45056 Mild Steel 1-1/16 Hex 60A20 Sprockets

N/A 45057 Mild Steel 1-1/16 Hex 80A16 Sprockets









Bearing Part Number

45172-GP 45053-GP 45077-GP 45054-GP

6 847 1203 4127 479212 844 1200 4124 478118 841 1197 4121 476424 838 1194 4118 474330 834 1190 4114 413536 831 1187 3418 338542 828 1184 2875 284748 825 1181 2462 243854 822 1178 2132 211160 818 1174 1860 184266 735 1171 1629 161272 624 1168 1427 141278 522 1165 1246 123384 428 1162 1081 107090 338 1158 929 91996 252 1155 786 778102 169 1152 650 643108 88 1027 519 513114 N/A 912 392 388120 N/A 771 268 265126 N/A 600 146 144132 N/A 432 N/A N/A138 N/A 267 N/A N/A144 N/A 104 N/A N/A



9/32


7/16



Roller Part Number

BF

STRAIGHT ROLLERS




Keeper Bar



3 1/2 in. O.D. x .300 Wall RollersRoller Part Number


OptionsBearing Part

NumberD-End Retained

Pin Retained

N/A 31444 Mild Steel 1 Hex Gravity 102314-GP




N/A 22683 Mild Steel 1-1/16 Hex (RG) Gravity 102086-GP


102101-GP



N/A 39631 Mild Steel 1-1/16 Hex (RG) Gravity

N/A 39632 Mild Steel 1-1/16 Hex (RG) 60A20 Sprockets

N/A 39633 Mild Steel 1-1/16 Hex (RG) 80A16 Sprockets




5/16

5/16



7/16

5/16



Bearing Part Number

102314-GP 102061-GP 102086-GP 102101-GP

6 1201 1201 1201 412612 1196 1196 1196 412018 1191 1191 1191 411524 1186 1186 1186 411030 1181 1181 1181 410536 1176 1176 1176 340842 1171 1171 1171 286348 1165 1165 1165 244854 1160 1160 1160 211760 1155 1155 1155 184366 1150 1150 1150 160972 1145 1145 1145 140578 1140 1140 1140 122284 1135 1135 1135 105690 1130 1130 1130 90296 1090 1124 1124 757102 924 1119 1119 619108 766 1093 1093 486114 613 910 910 357120 464 733 733 231126 319 560 560 107132 175 391 391 N/A138 N/A 161 161 N/A

Regreasable (RG)

Regreasable (RG)


Roller Part Number

BF

STRAIGHT ROLLERS




Keeper Bar





Bearing Part Number

114249-GP 27949 102197-GP 24862

6 4791 6167 2496 616812 4778 6162 2491 616318 4759 6157 2485 615824 4736 6152 2480 615230 4126 6147 2475 614736 3375 6142 2470 614242 2835 5742 2465 581348 2423 5005 2460 505954 2095 4432 2455 447560 1824 3910 2450 400966 1592 3467 2444 362972 1390 3085 2439 331278 1209 2749 2263 304384 1044 2447 2013 268390 891 2173 1785 231696 748 1919 1575 2016102 611 1682 1378 1768108 480 1458 1192 1559114 352 1243 1015 1383120 227 1037 844 1231126 104 836 678 1101132 N/A 635 516 987138 N/A 298 356 887144 N/A N/A 199 799150 N/A N/A N/A 562156 N/A N/A N/A 172


27949 All Metal Precision


5/16

15/32



9/16

7/16



3 1/2 in. O.D. x .300 Wall RollersRoller Part Number


OptionsBearing Part


Pin Retained





27949N/A 40747 Mild Steel 1-1/8 Hex 60A20 Sprockets


28546 N/A Mild Steel 1-3/16 Dia. (RG) Gravity

102197-GP39258 N/A Mild Steel 1-3/16 Dia. 60A20 Sprockets

39259 N/A Mild Steel 1-3/16 Dia. 80A16 Sprockets

23238 N/A Mild Steel 1-7/16 Dia. Gravity




Roller Part Number

BF

STRAIGHT ROLLERS




Keeper Bar



4 in. O.D. x 10 ga. RollersRoller Part Number


OptionsBearing Part


Pin Retained

N/A 28548 Mild Steel 1-1/8 Hex Gravity 27956

28549 N/A Mild Steel 1-3/16 Dia. Gravity 27957

45112 N/A Mild Steel 1-3/8 Dia. Gravity 45104-GP




Bearing Part Number

27956 27957 45104-GP 45103-GP

6 6170 4644 6170 617012 6167 4641 6167 616718 6164 4638 6164 616424 6161 4635 6161 616130 5564 4633 5661 566136 4613 4630 4680 468042 3938 3962 3987 398748 3434 3452 3471 347154 3042 3057 3071 307160 2729 2741 2753 275366 2473 2483 2493 249372 2260 2268 2276 227678 2079 2086 2093 209384 1924 1930 1936 193690 1789 1795 1800 180096 1573 1586 1599 1599102 1384 1395 1406 1406108 1225 1234 1243 1243114 1091 1098 1106 1106120 976 953 989 989126 876 778 888 888132 692 608 800 800138 502 441 723 723144 314 276 655 655150 N/A N/A 595 595156 N/A N/A 519 542162 N/A N/A 305 494168 N/A N/A N/A 320




15/32

19/32



19/32

11/32


Roller Part Number

BF

STRAIGHT ROLLERS




Keeper Bar



4 in. O.D. x 1/4 Wall RollersRoller Part Number


OptionsBearing Part


Pin Retained

N/A 45110 Mild Steel 1-1/8 Hex Gravity 45102-GP








Bearing Part Number

45102-GP 45101-GP 27955 24864

6 6168 4642 6168 616812 6163 4637 6163 616318 6158 4632 6158 615824 6153 4627 6153 615330 6148 4622 6148 614836 6143 4617 6143 614342 5896 4612 6138 613848 5081 4482 5927 592754 4437 3912 5244 524460 3910 3446 4699 469966 3467 3054 4255 425572 3086 2716 3885 388578 2750 2419 3572 357284 2448 2153 3303 330390 2174 1911 3070 307096 1921 1687 2727 2727102 1683 1478 2396 2396108 1459 1280 2119 2119114 1245 1091 1884 1884120 1039 909 1683 1683126 838 732 1510 1510132 643 560 1353 1360138 450 390 1124 1228144 260 223 900 1113150 N/A N/A 679 992156 N/A N/A 462 745162 N/A N/A 246 502168 N/A N/A N/A 260




15/32

19/32



19/32

11/32


Roller Part Number

BF

STRAIGHT ROLLERS




Keeper Bar






OptionsBearing Part


Pin Retained

N/A 28551 Mild Steel 1-1/16 Hex (RG) Gravity 102086-GP








102101-GP Semi Precision


11/32


11/32


19/32



Bearing Part Number

102086-GP 102101-GP 27949 27951 24862

6 1198 4122 6164 6165 616512 1188 4113 6154 6155 615518 1179 4103 6145 6146 614624 1170 4094 6136 6136 613630 1160 4085 6126 6127 612736 1151 3384 6117 6118 611842 1142 2834 5867 6108 610848 1132 2415 5047 6099 609954 1123 2079 4399 6090 609060 1114 1801 3868 5548 608066 1104 1563 3421 4940 595472 1095 1355 3035 4420 534178 1086 1168 2694 3967 480784 1076 997 2389 3565 433590 1067 839 2110 3202 391196 1057 690 1852 2871 3524102 1048 548 1611 2564 3168108 1019 411 1382 2277 2835114 832 277 1164 2006 2522120 650 N/A 953 1747 2225126 473 N/A 748 1499 1940132 299 N/A 548 1259 1666138 N/A N/A 351 1025 1400144 N/A N/A N/A 797 1103150 N/A N/A N/A 469 668156 N/A N/A N/A N/A 257

Regreasable (RG)


19/32

15/32


Roller Part Number

BF

STRAIGHT ROLLERS




Keeper Bar





OptionsBearing Part


Pin Retained

28555 Upon Request Mild Steel 1-3/16 Dia. Gravity 27957



OptionsBearing Part


Pin Retained

N/A 28033 Mild Steel 1-1/4 Hex Gravity102205-GP

N/A 28034 Mild Steel 1-1/4 Hex (RG) Gravity




15/32


31/64


19/32




Bearing Part Number


Bearing Part Number

102205-GP 24864 102205-GP 24864

6 4493 6165 90 2619 391712 4484 6156 96 2334 353118 4475 6147 102 2070 317524 4466 6138 108 1822 284330 4457 6129 114 1587 253036 4448 6120 120 1363 223342 4439 6111 126 1146 194948 4430 6102 132 936 167554 4421 6094 138 731 140960 4412 6085 144 530 114966 4098 5958 150 N/A 89572 3657 5345 156 N/A 64578 3272 4812 162 N/A 39784 2929 4341



Bearing Part Number


Bearing Part Number

27957 27957

6 4641 78 241412 4636 84 214818 4631 90 190524 4625 96 168130 4620 102 147136 4615 108 127342 4609 114 108448 4478 120 90254 3908 126 72560 3441 132 55266 3049 138 38272 2711


Roller Part Number

BF

STRAIGHT ROLLERS




Keeper Bar





OptionsBearing Part


Pin Retained

45083 N/A Mild Steel 1-7/16 Dia. Gravity45082-GP



45087 N/A Mild Steel 1-11/16 Dia. Gravity45080-GP




Bearing Part Number

45082-GP 45081-GP 45080-GP

6 6167 7830 783112 6161 7824 782518 6154 7818 781824 6148 7811 781230 6142 7805 780636 6135 7799 779942 6129 7792 779348 6123 7786 778754 6116 7780 778060 6110 7580 767066 5981 6871 694672 5370 6281 634478 4840 5781 583584 4371 5353 539990 3950 4981 502196 3566 4655 4690102 3212 4367 4398108 2883 4111 4139114 2573 3841 3906120 2279 3446 3509126 1997 3105 3159132 1726 2808 2856138 1462 2550 2591144 1205 2322 2358150 954 2120 2153156 706 1920 1970162 461 1534 1704168 N/A 1154 1379174 N/A 777 1058180 N/A 402 741



19/32


11/32


11/16


Roller Part Number

BF

STRAIGHT ROLLERS




Keeper Bar






11/32


11/16



OptionsBearing Part


Pin Retained

24876 N/A Mild Steel 1-7/16 Dia. Gravity24864



26837 N/A Mild Steel 1-11/16 Dia. Gravity26838




Bearing Part Number

24864 27953 26838

6 6158 7821 722312 6141 7804 780618 6124 7787 778924 6107 7770 777230 6090 7753 775536 6073 7736 773842 6056 7719 772148 6039 7702 770454 6022 7685 768760 6005 7668 767066 5871 7651 765372 5250 7634 763678 4709 7617 761984 4229 7600 721790 3797 7074 656196 3403 6417 5969102 3038 5815 5429108 2698 5256 4930114 2377 4733 4464120 2072 4239 4027126 1780 3769 3612132 1498 3318 3216138 1224 2884 2836144 956 2462 2469150 694 1972 2112156 435 1260 1764162 N/A 589 1423168 N/A N/A 931

19/32


Roller Part Number

BF

STRAIGHT ROLLERS




Keeper Bar





OptionsBearing Part

NumberD-EndRetained

Pin Retained





Bearing Part Number

45067-GP 45068-GP

6 8382 1254212 8370 1253118 8359 1252024 8348 1250930 8336 1249736 8325 1248642 8314 1247548 8303 1246354 8291 1245260 8280 1244166 8269 1243072 8257 1241878 8246 1225984 8235 1134090 8224 1054596 8212 9850

102 8201 9237108 8190 8692114 7960 8205120 7314 7766126 6708 7368132 6135 7006138 5590 6664144 5068 6077150 4566 5558156 4080 5098162 3607 4688168 3146 4320174 2695 3990180 2251 3691

11/16




1

25/32


Roller Part Number

BF

STRAIGHT ROLLERS




Keeper Bar





25/32


1


1 7/64



OptionsBearing Part


Pin Retained






Bearing Part Number

27960 27962 102203-GP

6 8374 12536 5598712 8353 12515 5593218 8332 12494 5585624 8311 12473 5575930 8290 12452 5564336 8269 12431 4597242 8248 12410 3900048 8227 12389 3384954 8206 12368 2988760 8185 12347 2674466 8164 12326 2418872 8143 12305 2206878 8122 12284 2028084 8101 12263 1875290 8080 12242 1743096 8059 12221 16274102 8038 12199 15254108 8017 12178 14348114 7782 12157 13537120 7127 12136 12807126 6511 12115 12145132 5928 11521 11542138 5374 10955 10991144 4842 9982 10031150 4330 9123 9166156 3834 8360 8399162 3352 7680 7715168 2881 7071 7102174 2420 6522 6550180 1966 6027 6052


Roller Part Number

BF

STRAIGHT ROLLERS




Keeper Bar



8 in. O.D. x 1 Wall RollersRoller Part Number


OptionsBearing Part


Pin Retained





Bearing Part Number

27965 102204-GP

6 15852 7841412 15814 7833418 15777 7822924 15740 7810030 15702 7794636 15665 7776842 15628 7756548 15590 7733854 15553 7134360 15515 6382766 15478 5772572 15441 5267078 15403 4841384 15366 4477790 15328 4163496 15291 38890102 15254 36472108 15216 34325114 15179 32406120 15142 30678126 15104 29115132 15067 27693138 15029 26393144 14992 25201150 14955 24103156 14917 23087162 14880 22145168 14842 21269174 14805 20411180 14768 18917



1 1/16


1 1/4

TAPERED ROLLERS


Roller Part Number

BF

TAPERED ROLLERS




Keeper Bar


*Roller Between Frame lengths available between values shown in the table.

1 1/2 in. O.D. to 1 in. O.D. x 18 ga. Tapered RollersRoller Part Number


OptionsSmall Bearing Part Number

Large Bearing Part NumberSpring

RetainedPin

Retained

45265 Upon Request Mild Steel 1/4 Dia. Gravity

102245-O 115934-O45267 Upon Request Mild Steel 1/4 Dia. 3 Grooves

45264 Upon Request Zinc Plated 1/4 Dia. Gravity

45266 Upon Request Zinc Plated 1/4 Dia. 3 Grooves



Bearing Part Number Flat Length

(Large End)Inches102245-O

115934-O

10 79 111 71 212 64 313 58 5/814 53 1-5/815 49 2-5/816 45 3-5/817 42 1-3/818 39 2-3/819 36 3-3/820 33 121 31 222 29 323 27 424 25 1/225 23 1-1/226 22 2-1/227 20 3-1/228 19 4-1/2

102245-O Unground Press Fit 115934-O Unground Crimped


3/16 5/16Flat Length


Roller Part Number

BF

TAPERED ROLLERS




Keeper Bar



1 1/2 in. O.D. to 1 in. O.D. x 18 ga. Tapered RollersRoller Part Number




RetainedPin

Retained


102152-O 102175-O29836 29837 Mild Steel 5/16 Hex 3 Grooves

40343 Upon Request Zinc Plated 5/16 Hex Gravity

40342 Upon Request Zinc Plated 5/16 Hex 3 Grooves





102175-O

10 100 111 100 212 100 313 100 5/814 100 1-5/815 100 2-5/816 100 3-5/817 100 1-3/818 100 2-3/819 100 3-3/820 100 121 100 222 98 323 92 424 88 1/225 83 1-1/226 79 2-1/227 75 3-1/228 71 4-1/2

102152-O Unground Press Fit 102175-O Unground Crimped


Flat Length3/16 5/16


Roller Part Number

BF

TAPERED ROLLERS




Keeper Bar



5/16

2 1/2 in. O.D. to 1 11/16 in. O.D. x 14 ga. Tapered RollersRoller Part Number




RetainedPin

Retained

28697 28698 Mild Steel 7/16 Hex Gravity 102052-O 102309


102053-GP 10231028108 28107 Mild Steel 7/16 Hex 3 Grooves






(Large End)Inches



102309102053-GP

102310

13 288 2-11/16 288 2-11/1615 287 1/2 287 1/217 287 2-1/2 287 2-1/219 287 4-1/2 287 4-1/221 286 7/8 286 7/823 286 2-7/8 286 2-7/825 286 4-7/8 286 4-7/827 285 1-5/8 285 1-5/829 285 3-5/8 285 3-5/831 265 5-5/8 265 5-5/833 245 2-5/32 245 2-5/3235 227 4-5/32 227 4-5/3237 210 6-5/32 210 6-5/3239 195 8-5/32 195 8-5/32

102053-GP Unground Press Fit 102310 Unground Crimped


102052-O Unground Press Fit 102309 Unground Crimped

21/643/8

21/643/8

FlatLength

FlatLength


Roller Part Number

BF

TAPERED ROLLERS




Keeper Bar







RetainedPin

Retained

43177 43178 Mild Steel 7/16 Hex Gravity 114235-GP 114203-GP

43198 43199 Mild Steel 7/16 Hex 40A22 Sprockets114092-GP 114091-GP





(Large End)Inches


(Large End)Inches114235-GP

114203-GP114092-GP 114091-GP

13 438 2-15/32 308 2-13/1615 Special Special Special Special17 375 2-9/32 227 2-5/819 331 4-9/32 199 4-5/821 296 21/32 177 123 267 2-21/32 159 325 242 4-21/32 144 527 221 1-13/32 131 1-3/429 203 3-13/32 119 3-3/431 187 5-13/32 109 5-3/433 172 1-15/16 99 2-9/3235 159 3-15/16 91 4-9/3237 147 5-15/16 83 6-9/3239 136 7-15/16 76 8-9/32

114092-GP Plastic Housed Precision 114091-GP Plastic Housed Precision


114235-GP Plastic Housed Precision 114203-GP Plastic Housed Precision

1/2 17/32

5/16 3/8

FlatLength

FlatLength


Roller Part Number

BF

TAPERED ROLLERS




Keeper Bar







RetainedPin

Retained

41817 Upon Request Zinc Plated 7/16 Hex Gravity102053-GP 102310

41815 Upon Request Zinc Plated 7/16 Hex 3 Grooves

43181 43182 Zinc Plated 7/16 Hex Gravity

114235-GP 114203-GP43190 43191 Zinc Plated 7/16 Hex 2 Grooves

43186 43187 Zinc Plated 7/16 Hex 3 Grooves




(Large End)Inches


(Large End)Inches102053-GP

102310114235-GP 114203-GP

13 288 2-11/16 438 2-15/3215 287 1/2 Special Special17 287 2-1/2 375 2-9/3219 287 4-1/2 331 4-9/3221 286 7/8 296 21/3223 286 2-7/8 267 2-21/3225 286 4-7/8 242 4-21/3227 285 1-5/8 221 1-13/3229 285 3-5/8 203 3-13/3231 265 5-5/8 187 5-13/3233 245 2-5/32 172 1-15/1635 227 4-5/32 159 3-15/1637 210 6-5/32 147 5-15/1639 195 8-5/32 136 7-15/16


114235-GP Plastic Housed Precision 114203-GP Plastic Housed Precision*The dimension above include 1/16" clearance between the extension on the bearing and the side frame at each end.

102053-GP Unground Press Fit 102310 Unground Crimped

21/643/8 FlatLength

1/2 17/32FlatLength

PVC and STAINLESS STEEL ROLLERS


3/161 in. O.D. x 16 ga. Stainless Steel RollersRoller Part Number

TubeMaterial Axle Drive

OptionsCorrosion

TypeBearing Part


Pin Retained

45289 Upon Request Stainless Steel 1/4 Dia. Gravity D Class 102245-O

45290 Upon Request Stainless Steel 5/16 Hex Gravity D Class 102152-O



Bearing Part Number

102245-O 102152-O

6 60 609 60 6012 59 5915 59 5918 59 5921 56 5924 47 5927 40 5930 34 5833 28 5836 23 5839 18 58


3/16


114625 Plastic

3/8

1 in. Pipe Rollers (1.315 in. O.D.)Roller Part Number


OptionsCorrosion

TypeBearing Part


Pin Retained

43460 43459 SCH 40 PVC** 5/16 Hex SS Gravity D Class 114625



Bearing Part Number

114625

6 809 8012 6815 5418 4421 3724 3027 2330 1833 1536 1239 10

114625SCH 40 PVC**


Roller Part Number




(Cage)Keeper

BarUnground

Stainless Steel

*Refer to pages 6 and 7 for PVC and Stainless Steel Roller information.*Larger Between Frames and higher capacities may be achieved with a center support puck. *Roller Between Frame lengths available between values shown in the table.*Roller Between Frames can be shorter than values shown utilizing pin retention.**PVC Pipe is industrial grade. At longer lengths T.I.R. cannot be guaranteed.


Roller Part Number

BF





Keeper Bar


*Refer to pages 6 and 7 for PVC and Stainless Steel Roller information.*Larger Between Frames and higher capacities may be achieved with a center support puck. *Roller Between Frame lengths available between values shown in the table.*Roller Between Frames can be shorter than values shown utilizing pin retention.

1 3/8 in. O.D. x 16 ga. Stainless Steel RollersRoller Part Number


OptionsCorrosion

TypeBearing Part


Pin Retained

42007 42008 Stainless Steel 5/16 Hex SS Gravity P Class 113141-O

113141-O Semi-Precision

9/32




Bearing Part Number

113141-O

6 1829 18112 17115 13318 10821 9024 7627 6530 5533 4736 4039 33



Roller Part Number




(Cage)Keeper

BarUnground

Stainless Steel




Bearing Part Number

115178 115902-GP 115971-O 115971-GP 114210-GP

6 137 259 279 37612 137 259 279 37318 136 258 278 36924 136 257 277 26930 135 257 277 20736 134 256 264 16442 134 233 211 13148 133 186 169 10354 132 145 132 8060 110 109 98 5966 75 74 67 3972 42 42 37 20

1.9 in. O.D. x 16 ga. Stainless Steel RollersRoller Part Number


OptionsCorrosion

TypeBearing Part


Pin Retained

44509 44510 Stainless Steel 7/16 Hex SS Gravity P Class 115178

44476 44477 Stainless Steel 7/16 Hex SS Gravity D Class 115902-GP

45269 45271 Stainless Steel 7/16 Hex SS Gravity P Class 115971-O

45273 45274 Stainless Steel 7/16 Hex SS Gravity P Class 115971-GP



115178 Plastic

9/32



17/32


13/32

13/64


Roller Part Number

BF





Keeper Bar



1.9 in. O.D. x 11 ga. Stainless Steel RollersRoller Part Number


OptionsCorrosion

TypeBearing Part


Pin Retained

28781 28782 Stainless Steel 7/16 Hex Mild Steel Gravity D Class 102051-O

Upon Request 45272 Stainless Steel 7/16 Hex Mild Steel Gravity D Class 102155-GP

44995 44994 Stainless Steel 7/16 Hex SS Gravity P Class

110244-GP44997 44996 Stainless Steel 7/16 Hex SS 40A18 Sprockets P Class

44999 44998 Stainless Steel 7/16 Hex SS 50A15 Sprockets P Class


42269 42268 Stainless Steel 7/16 Hex SS Gravity P Class114210-GP

45188 Upon Request Stainless Steel 7/16 Hex SS 2 Grooves P Class




9/32


9/32


13/32

13/32Roller Capacity Chart (lbs.)*


Bearing Part Number

102051-O 102155-GP 110244-GP 114210-GP

6 299 566 283 37612 298 518 282 37218 297 332 281 36824 296 239 280 26730 293 182 214 20536 232 141 166 16142 186 109 129 12748 148 83 97 9954 115 59 69 7660 85 38 43 5466 58 N/A 18 3472 32 N/A N/A N/A



Bearing Part Number

115275 114624

6 80 8012 80 8018 54 7924 38 7930 27 6336 18 4442 11 3248 N/A 2354 N/A 1860 N/A 14

1 1/2 in. Pipe Rollers (1.9 in. O.D.)Roller Part Number


OptionsCorrosion

TypeBearing Part


Pin Retained

45099 Upon Request SCH 40 PVC** 1/4 Dia. SS Gravity D Class 115275

43462 43461 SCH 40 PVC** 7/16 Hex SS Gravity D Class 114624

114624 Plastic

115275 Plastic


3/8

3/8


Roller Part Number




(Cage)Keeper

BarUnground

Stainless Steel

*Refer to pages 6 and 7 for PVC and Stainless Steel Roller information.*Larger Between Frames and higher capacities may be achieved with a center support puck. *Roller Between Frame lengths available between values shown in the table.*Roller Between Frames can be shorter than values shown utilizing pin retention.**PVC Pipe is industrial grade. At longer lengths T.I.R. cannot be guaranteed.

115275SCH 40 PVC**

114624SCH 40 PVC**


Roller Part Number

BF





Keeper Bar





Bearing Part Number

114238-GP 102054-GP 112896-GP 115970-GP 114416-GP 114237-GP

6 330 649 1349 849 699 59912 327 647 1344 847 697 59718 323 646 1300 846 696 59624 235 644 946 844 694 59430 178 642 736 843 692 59336 139 641 594 812 691 59142 109 639 490 674 612 59048 84 638 408 568 510 58854 62 636 340 480 425 56360 42 635 282 406 351 47766 24 633 231 341 285 40172 N/A 544 183 282 225 33378 N/A 459 139 228 168 27084 N/A 385 97 177 114 21190 N/A 294 56 128 61 15496 N/A 207 N/A 80 N/A 99102 N/A 122 N/A 34 N/A 45108 N/A 37 N/A N/A N/A N/A



9/32


17/32


17/32


2 1/2 in. O.D. x 11 ga. Stainless Steel RollersRoller Part Number


OptionsCorrosion

TypeBearing Part


Pin Retained


40508 40507 Stainless Steel 11/16 Hex Mild Steel Gravity D Class 102054-GP

40510 40509 Stainless Steel 11/16 Hex Mild Steel Gravity D Class

112896-GP40512 40511 Stainless Steel 11/16 Hex Mild Steel 40A22 Sprockets D Class

40514 40513 Stainless Steel 11/16 Hex Mild Steel 50A17 Sprockets D Class

40516 40515 Stainless Steel 11/16 Hex Mild Steel 60A15 Sprockets D Class


44889 44888 Stainless Steel 11/16 Hex SS Gravity P Class

114416-GP44891 44890 Stainless Steel 11/16 Hex SS 40A22 Sprockets P Class





17/32


9/32 13/64


Fax [email protected] - Roller Catalog - 05/13

OMC Roller Catalog

Documents

Transcript of OMC Roller Catalog