Oman Plast - Event Catalogue

44

description

2nd Oman International Plastics, Rubber and Packaging Industry Exhibition 2014

Transcript of Oman Plast - Event Catalogue

Page 1: Oman Plast - Event Catalogue
Page 2: Oman Plast - Event Catalogue
Page 3: Oman Plast - Event Catalogue

C

M

Y

CM

MY

CY

CMY

K

Page 4: Oman Plast - Event Catalogue

HIS MAJESTY SULTAN QABOOS BIN SAID

Page 5: Oman Plast - Event Catalogue
Page 6: Oman Plast - Event Catalogue

2nd OMAn InTERnATIOnAL PLASTICS, RUBBER And PACKAGInG IndUSTRY EXHIBITIOn 20144

CHIEF GUEST MESSaGE

On behalf of Public Establishment for Industrial Estates (PEIE), I would like to extend a warm welcome to all exhibitors and visitors to 2nd OMAn PLAST 2014, the 2nd OMAn InTERnATIOnAL PLASTICS, RUBBER And PACKAGInG IndUSTRY EXHIBITIOn 2014. It is only a fitting that the Sultanate of Oman, one of the biggest players in the petrochemical industry, is the host nation for an exhibition, which would become the region’s biggest exhibition for the plastics, rubber and packaging industry in the near future.

Over the last 43 years, under the visionary leadership of His Majesty Sultan Qaboos Bin Said, the Sultanate of Oman has taken great strides in the development of the Omani industry. The growth rate achieved by Oman in the past few years has been quite encouraging. The Petrochemical industry being one of the main components of the Omani economy encouraging the downstream of Polypropylene and PET, this event will give a great impetus to its further diversification and growth.

One of the fundamental goals of the Oman’s Vision 2020 is the development of a private sector capable of optimum use of human and natural resources in an efficient and ecologically sound ways. As per this vision, the industrial sector including the petrochemical, gas-based projects and plastics industries would play a vital role in trying to achieve Oman’s economic objectives.

With an impressive array of leading manufacturers and suppliers present this year, 2nd OMAn PLAST 2014 will offer a perfect gateway to reach this highly potential market and holds tremendous prospects of excellent business opportunities and new collaborations.

I take this opportunity to wish all exhibitors, delegates and visitors of the 2nd OMAn InTERnATIOnAL PLASTICS, RUBBER And PACKAGInG IndUSTRY EXHIBITIOn 2014 a grand success and look forward to welcoming everyone in our beautiful country, the land of warmth, hospitality and comfort.

for PUBLIC ESTABLISHMENT FOR INDUSTRIAL ESTATES (PEIE)

HILAL BIN HAMAD AL HASANICHIEF EXECUTIVE OFFICER

Page 7: Oman Plast - Event Catalogue

2nd OMAn InTERnATIOnAL PLASTICS, RUBBER And PACKAGInG IndUSTRY EXHIBITIOn 2014 5

MD’ S MESSaGE

On behalf of the management and staff, it is my pleasure to welcome one and all of you to 2nd OMAn PLAST 2014, the 2nd OMAn InTERnATIOnAL PLASTICS, RUBBER And PACKAGInG IndUSTRY EXHIBITIOn 2014. I would like to express our gratitude to all our well wishers, sponsors, exhibitors, media partners and visitors whose strong support has been an influential motivation in making this event possible.

2nd OMAn PLAST is perfectly timed for the continuing boom in Oman’s plastics and rubber industry. As the petrochemical industry is a major contributor to Oman’s growing economy, this event will give a great impetus to its further diversification and growth as well as highlighting the opportunities this region might offer. The event attracts key industry players and decision-makers from the corporate and public sectors in the region providing a strategic setting to forge business tie-ups and contacts.

2nd OMAn PLAST in its second edition will showcase the latest technology and machineries used in manufacturing of plastics and petrochemicals with participation from different parts of the world. This event will be an excellent platform for exhibitors to publicise and display their products, innovation and services, build brand image and develop leadership in market position in the global areas. It will be an ideal stage for those who are interested to explore and acknowledge the most recent technologies and trends of the relevant market as well as exhibit a vast range of products and services related to analytical instrument.

I would like to take this opportunity to thank everyone for their support and valuable contributions towards the success of 2nd OMAn PLAST 2014. I wish all exhibitors and visitors a highly productive, interactive and successful event. We look forward to welcoming you again in our 3Rd OMAn PLAST 2015.

for SILVER STAR CORPORATION L.L.C..

P.D.NATHMANAGING DIRECTOR

Page 8: Oman Plast - Event Catalogue

2nd OMAn InTERnATIOnAL PLASTICS, RUBBER And PACKAGInG IndUSTRY EXHIBITIOn 20146

InaUGUral CErEMony oF oMan PlaST

2012

Page 9: Oman Plast - Event Catalogue

2nd OMAn InTERnATIOnAL PLASTICS, RUBBER And PACKAGInG IndUSTRY EXHIBITIOn 2014 7

Page 10: Oman Plast - Event Catalogue

2nd OMAn InTERnATIOnAL PLASTICS, RUBBER And PACKAGInG IndUSTRY EXHIBITIOn 20148

aBoUT THE orGanIZEr

Silver Star is one of the leading organisers of large scale exhibitions in Oman and has established in 1992. Silver Star is having a reputation of organising more than thirty highly successful exhibitions (International, domestic and solo) and these include INDEXPO MUSCAT ’93 and INDEXPO MUSCAT ’97 (an exclusive Indian Trade Fair) under the patronage of Indian Embassy, Muscat and supported by India Trade Promotion Organisation and Federation of Indian Export Organisations both are Government of India Undertakings and SPRING FAIR ’94, CONSUMEX ’95, SPRING FAIR ’95, CONSUMEX ’96, SPRING FAIR ’97, CONSUMEX ’97, SPRING FAIR ’98, CONSUMEX ’98, SPRING FAIR ’99, CONSUMEX ’99, SPRING FAIR 2000, CONSUMEX 2000, ARAB GOLD & JEWELLERY EXHIBITION 2001, Muscat, ARAB GOLD & JEWELLERY EXHIBITION 2001, SALALAH and Global Village at Muscat Festival 2003, 3rD INDEXPO MUSCAT 2010, 4TH INDEXPO MUSCAT 2011, 5TH INDEXPO MUSCAT 2012 supported by Department of Commerce, Ministry of Commerce and Industry, Government of India and OMAN PLAST 2012, INTERNATIONAL CONSUMER EXHIBITION 2012 and INTERNATIONAL TEXTILES AND GARMENTS EXHIBITION 2012 at Sohar, ITF Dubai 2013 (an exclusive Indian Trade Fair 2013, Dubai), Oman Geospatial Expo 2013 etc.

Apart from this, Silver Star is the first Omani Company to be appointed as Management Consultant to the Ministry of Commerce and Industry, Government of Oman for their Mobile Exhibition of Omani Products which has been inaugurated by His Majesty Sultan Qaboos Bin Said in Muscat and similar such exhibitions have been organised in other Willayats of Oman viz. Salalah, Sur, Nizwa, Sohar, Buraimi and Khasab. All these exhibitions were of high standard and have appreciated by one and all. The company is now looking forward in making 2ND OMAN PLAST 2014, 2ND OMAN INTErNATIONAL PLASTICS, rUBBEr AND PACKAGING INDUSTrY EXHIBITION 2014 yet another success story.

Page 11: Oman Plast - Event Catalogue

2nd OMAn InTERnATIOnAL PLASTICS, RUBBER And PACKAGInG IndUSTRY EXHIBITIOn 2014 9

Floor Plan

HALL- 1

Page 12: Oman Plast - Event Catalogue

SJS Group (Oman) does not give any warranty towards the contents of the material appearing in the INTERNATIONAL PLASTICS & RUBBER INDUSTRY EXHIBITION & CONFERENCE Catalogue 2014, its accuracy, timeliness of fitness for any particular purpose. SJS Group disclaims all responsibility for any damages or losses in the use and dissemination of the information.

Designed By:

SJS Group (Oman)PO 2058, PC 112, Sultanate of OmanT: +968 24789680 | F: +968 24751019E: [email protected]

S M E V E N T U R E

VENUE : OmAn InTernATIOnAl exhIbITIOn CenTre, musCAT, sulTAnATe Of OmAn

DATE : 11Th TO 13Th februAry 2014

EXHIBITS : PlAsTICs, rubber PrOduCTs, PACkAgIng IndusTry, ChemICAls And ITs AllIed PrOduCTs, mAChInerIes, equIPmenTs And servICes eTC.

TIMINGS : 10.00 A.m. TO 7.00 P.m.

2nd OMAn InTERnATIOnAL PLASTICS, RUBBER And PACKAGInG

IndUSTRY EXHIBITIOn 2014

Page 13: Oman Plast - Event Catalogue
Page 14: Oman Plast - Event Catalogue

2nd OMAn InTERnATIOnAL PLASTICS, RUBBER And PACKAGInG IndUSTRY EXHIBITIOn 201412

NAME Of THE EXHIBITOr COUNTrY STALL NOS.

A.A. Juma Plastic Pipes & Fittings Co. L.L.C. UAE 940

Abou Nabil L.L.C. Oman 305

Abu Mansoor Plastic Factory LLC UAE 203

Al Hilal Fiber Acrylic Industry L.L.C. Oman 101

Al Hilal Plastic Industry L.L.C. Oman 401

Al Rahbi Plastics L.L.C. Oman 202

Blend Polymer Industries L.L.C. UAE 405

Deesha Impex India 942

Fujaira Plastic Factory UAE 504

Gulf Acrylic Industries L.L.C. Oman 601

Gulf Packaging Machines JLT UAE 201

Gulf Plastic Industries Co. S.A.O.G. Oman 701 & 702

Gulf Star L.L.C. (DARCHEM) Oman 306

Multi Trade FZC UAE 205

Ocean Rubber L.L.C. Oman 302

Oman Polycon L.L.C. Oman 102

Palletco L.L.C. UAE 505 & 506

Polythene & Plastic Products L.L.C. Oman 501

Qatar Polymer Industrial Company Qatar 503

Rafiq Burghli Group/Jordan Minerals Est. Jordan 301

Shamal Plastic Industries L.L.C. Oman 602

SJS Group (Oman) Oman 402

Society of Plastic Engineers USA 939

Supreme Rubber L.L.C. UAE 204

Techno Plastic Industry Oman 403

Technovaa Oman L.L.C. (Darvesh Group) Oman 305

Tradekey Pvt. Ltd. Pakistan 941

United Gulf Pipe Manufacturing Co. L.L.C. Oman 603-906

United Gulf Pipe Manufacturing Co. L.L.C. Oman 801,802,901&902

VIESHESH POLY IMPEX INDIA 404

W.J. Towel & Co. L.L.C. (PET Division) Oman 502

Zayani Polymer Factory W.L.L. Bahrain 303

EXHIBITorS lISTInG - alPHaBETICal

Page 15: Oman Plast - Event Catalogue

2nd OMAn InTERnATIOnAL PLASTICS, RUBBER And PACKAGInG IndUSTRY EXHIBITIOn 2014 13

NAME Of THE EXHIBITOr COUNTrY STALL NOS.

Al Hilal Fiber Acrylic Industry L.L.C. Oman 101

Oman Polycon L.L.C. Oman 102

Gulf Packaging Machines JLT UAE 201

Al Rahbi Plastics L.L.C. Oman 202

Abu Mansoor Plastic Factory LLC UAE 203

Supreme Rubber L.L.C. UAE 204

Multi Trade FZC UAE 205

Rafiq Burghli Group/Jordan Minerals Est. Jordan 301

Ocean Rubber L.L.C. Oman 302

Zayani Polymer Factory W.L.L. Bahrain 303

Abou Nabil L.L.C. Oman 305

Technovaa Oman L.L.C. (Darvesh Group) Oman 305

Gulf Star L.L.C. (DARCHEM) Oman 306

Al Hilal Plastic Industry L.L.C. Oman 401

SJS Group (Oman) Oman 402

Techno Plastic Industry Oman 403

Vieshesh Poly Impex India 404

Blend Polymer Industries L.L.C. UAE 405

Polythene & Plastic Products L.L.C. Oman 501

W.J. Towel & Co. L.L.C. (PET Division) Oman 502

Qatar Polymer Industrial Company Qatar 503

Fujaira Plastic Factory UAE 504

Palletco L.L.C. UAE 505 & 506

Gulf Acrylic Industries L.L.C. Oman 601

Shamal Plastic Industries L.L.C. Oman 602

United Gulf Pipe Manufacturing Co. L.L.C. Oman 603-906

Gulf Plastic Industries Co. S.A.O.G. Oman 701 & 702

United Gulf Pipe Manufacturing Co. L.L.C. Oman 801,802,901&902

Society of Plastic Engineers USA 939

A.a. Juma Plastic Pipes & Fittings Co. L.L.C. UAE 940

Tradekey Pvt. Ltd. Pakistan 941

Deesha Impex India 942

EXHIBITorS lISTInG - By STall no

Page 16: Oman Plast - Event Catalogue

C

M

Y

CM

MY

CY

CMY

K

OP2014-arabic-handbill.ai 1 2/2/2014 6:21:57 AM

Page 17: Oman Plast - Event Catalogue

2nd OMAn InTERnATIOnAL PLASTICS, RUBBER And PACKAGInG IndUSTRY EXHIBITIOn 2014 15

A. A. JUMA PLASTIC PIPES & fITTINGS INDUSTrIAL CO. LLC

STALL NO.: 940Mr. Yahya El Ghlayini, Managing PartnerP.O. Box 5134, Dubai, UAETel: 00971 4 2852864, Fax: 00971 42858329, GSM: 00971 50 4529475Email: [email protected], [email protected] | Web: www.jumaplastic.com

Product/Company details:A.A. Juma Plastic Pipes & Fittings Ind. Company is a major manufacturer of UPVC in Dubai-UAE. Our comprehensive range of quality UPVC soil & sewer fittings are manufactured in accordance to the requirement European – British standard EN 13902 & EN 1401 constant care is taken to maintain this high standard of quality for all our products. The fittings have a high impact strength which helps prevent damage during handling or assembly. All parts assembled easily and using the simple technique of cold solvent cement welding, together with the use of seal ring joint to accommodate thermal movement, there will be considerable economy in labors and materials.

ABOU NABIL LLC

STALL NO.: 305 Mr. Arun Dsouza, Divisional ManagerP.O. Box 174, Postal Code 114, Muscat, Sultanate of OmanTel: 24593249, Fax: 24595278, Mob: 98165104 Email: [email protected] | Web: www.darvesh.com

Product/Company details:Gulf Star LLC (Special Products Division) is a strategic business unit of Darvesh Group in Sultanate of Oman, offering complete packaging solutions under one roof.

Our Product range as underManufacturer of Masking Tapes, BOPP Tapes, Printed Tapes, SpecialOffer Tapes, Colour Tapes, Double Sided Tapes.STRETCH FILMS - HAND GRADE & MACHINE GRADE.PE SHRINK FILMSPOF SHRINK FILMS - ITALYCLING FILM - FOOD GRADEWOVEN SACS - ALL SIZESFOAM ROLL - FOR Cushion PackingALUMINIUM FOIL TAPES - For Consumer & Catering PackingOther Packaging Materials Including Nylon Ropes, Corrugated Rolls,Air Bubble Rolls, Duct Insulation Tapes, PP Straps, Wax PaperCorner Protection Board & PP String.

lIST oF ParTICIPanTS

Page 18: Oman Plast - Event Catalogue

2nd OMAn InTERnATIOnAL PLASTICS, RUBBER And PACKAGInG IndUSTRY EXHIBITIOn 201416

ABU MANSOOr PLASTIC fACTOrY LLC

STALL NO.: 203Mr. Jas Randhawa, Managing DirectorICAD–1, Musaffah, Abu Dhabi, UAETel: 00971 2 5500701, Fax: 00971 2 5500704, GSM: 00971 56 6132201Email: [email protected] | Web: www.amp-uae.com

Product/Company details:Manufacturers of all types of Polythene Sheets and Construction Buckets

AL HILAL fIBEr & ACrYLIC INDUSTrY LLC

STALL NO.: 101 Mr. Mubarak Hamood Al-Nabhani, Sales ManagerP.O. Box 2692, Ruwi, Postal Code 112, Sultanate of OmanTel: 24703770, 24700241, Fax: 24792980, GSM: 97889180Email: [email protected], [email protected], [email protected] | Web: www.hilalgroup.com

Product/Company details:Al Hilal Fiber & Acrylic Industry LLC is one of the largest manufacturers that specialized in producing fiberglass & Acrylic finished products in the Sultanate of Oman. Now we have expanded our production line to include a new Acrylic plant adding an ever wider range or elegant baths. So more customers can enjoy the ultimate bathing experience we provide. Our rich Acrylic finishes are long lasting and very easy to clean. Everything we do is to ensure reliable performance and designed to set up to standards of luxury bathing.

Alhilal bath tubs and shower trays are manufactured from high quality acrylic sheets which are exclusively designed for sanitary ware and meet the international standards. These sheets are highly resistant to the water at quick and suddenly fluctuating temperature which causes cracks and discoloration in the ordinary acrylic sheets. Our bathtubs and shower trays are tested in the extreme temperature and maintain perfect results

A complete range of Jacuzzi fitted with high quality whirl pool and air pool systems is also available with our range of products. We provide an option of whirlpool jets and airpool jets system.

We are also one of the prominent names in the field of manufacturing of FRP tanks, and various special projects such as dooms, cabins, portable toilets, car sheds, etc …

Page 19: Oman Plast - Event Catalogue

2nd OMAn InTERnATIOnAL PLASTICS, RUBBER And PACKAGInG IndUSTRY EXHIBITIOn 2014 17

AL HILAL PLASTIC INDUSTrY L.L.C.

STALL NO.: 401 Mr. Mubarak Hamood Al-Nabhani, Sales ManagerP.O. Box 2692, Ruwi, Postal Code 112, Sultanate of OmanTel: 24703770, 24700241, Fax: 24792980, GSM: 97889180Email: [email protected], [email protected], [email protected] | Web: www.hilalgroup.com

Product/Company details:We manufacture superior quality pipes which are manufactured from high grade raw materials. Our range of pipes is perfectly finished and durable and is used widely for a host of applications in various industries varied purpose like irrigation, residential water supply, bore water supply and cable ducting. Our corrosions resistant pipes is known to possess high pressure bearing capability with easy installation features, simple to handle and transport, our light-weight having excellent tensile and material strength can be availed from us in different lengths, and pressure class ranging as per the international standards and Oman standards.Due to our superior quality products and reliable services we have a vast clientele spread across the country, with the strong urge of satisfying our customers, we make certain that all our products, deals and efforts are in collaboration with the needs of our esteemed customers. This ensures long lasting relations and helps us in receiving recurring orders and thereby positioning us among the trusted Suppliers in the Sultanate of OmanWe are backed by advanced infrastructural facilities that assist us to keep pace with the ever changing demands of the industry. Our technically advanced equipments and tools enable us to develop unmatched quality for UPVC pipes etc. These machines help us to maintain the optimum rate of production and successfully meet the work order demand.Our range of products includes the following pipesUPVC High pressure pipes of Oman Standards (85/1985) & British Standard BS 3505/1986UPVC Drainage pipes PS4660/1973UPVC Waste Pipe BS5255/1976UPVC conduit pipe Omani standard 109/1986 or gulf standard 33/1984UPVC soil and ventilating pipe BS4514/1983UPVC non pressure pipe (Duct Pipe) BS 3506 class O 1986

REGISTRATIONS NOW OPEN

Page 20: Oman Plast - Event Catalogue

2nd OMAn InTERnATIOnAL PLASTICS, RUBBER And PACKAGInG IndUSTRY EXHIBITIOn 201418

AL - rABHI PLASTICS L.L.C.

STALL NO.: 202Mr. Sh. Ahmed Nasser Hilal Al Rahbi, Managing DirectorMr. Liaqat Ali Abid, Sales ManagerP.O. Box 1775, RuwiPostal Code 112Sultanate of OmanTel: 00968 25368555,666,777, Fax: 00968 25368367Mob: 00968 99368368, 00968 99344403, 00968 92150482Email: [email protected]

Product/Company details:Manufacturer of all kinds of Polythene shopping bags, Laundry Bags, Garbage Bags, Pharmacy Bags, Zipper Medicine Bags, Garment Packing, Caution Tape for Electric, Cable, Caution Tape for Water Line, Road Blocking and Telephone Cable, LDPE Packing and Agriculture Sheet with UP Stabilizer and with Bio Degradable and Environment Friendly Bags, Sheets. All type of bakery packing bags: Unprinted and printed with multi colours, Disposable Dinner Sheet.

BLEND POLYMEr INDUSTrIES LLC.

STALL NO.: 405Mr. Adnan Aziz, DirectorP.O. Box 6643, New Industrial Area - 1, Ajman, UAETel: 00971 6 7436633, Fax: 00971 6 7436635, GSM: 00971 55 1212343Email: [email protected] | Web: www.blendgroup.net

Product/Company details:Blend Group has been in plastic business since 1991 and we’ve got an excellent reputation with a base of satisfied and loyal customers worldwide. We are one of the largest manufacturers of Calcium Carbonate Filler Masterbatch & Color Masterbatch in UAE.We have range of different grades of Filler Masterbatch ranging from PE, PP, PPR, PVC, Roto Grade etc for applications like Blown Film, Injection/Blow Molding, Woven and Non- Woven.We have facility to match and develop any Color Masterbatch as per customer requirement in our advance lab. Many of our fillers, compounds, masterbatches and additives can be customized based on your requirement and budget. We have an efficient distribution network that guarantees prompt and reliable delivery of products both within the country and overseas market. We aim to be a single point solution for all your plastics needs

Page 21: Oman Plast - Event Catalogue

Emerald Plastics Magazines Pvt. Ltd.Emerald Magazines Pvt. Ltd.PlasticsB-7, Bhanu Park, First Floor, J. Adukia Road, Kandivali (West), Mumbai –400067, India

Phone: +91-22-28081280 Fax: +91-22-28646665 Cell India: +91-98204-81278 Cell German: +49-1787260239 Email: [email protected] / [email protected] / [email protected]

Get your E-Magazine FREE Now log on to https:digital.emeraldgroupe.com

Modern Plastics India Is India's #1 Monthly Magazine

For The Plastics Industry Since February 2000.

Modern Extrusion World is World’s First & Only Mag for

Global Extrusion Professionals Since September 2012

Injection Moulding World Magazine Is Dedicated To Plastic Processing World

Since September 2001

Plastics Planet International Is A Monthly Update For The Global Plastics Professionals

Since September 2004

Packaging Planet Is A Monthly Magazine For The Global Packaging Industry

Since September 2012

Page 22: Oman Plast - Event Catalogue

2nd OMAn InTERnATIOnAL PLASTICS, RUBBER And PACKAGInG IndUSTRY EXHIBITIOn 201420

DEESHA IMPEX

STALL NO.: 942Mr. Khagen V. Mehta, PartnerA-7, Ambawadi Flats, Bhudarpura, Ahmedabad, IndiaTel: 0091 79 2646 2772, 29095548, Fax: 0091 79 26462772GSM: 0091 98240 59371Email: [email protected] | Web: www.deeshaimpex.com

Product/Company Details: Deesha Impex, Ahmedabad, India redefines quality through innovation customization with a state of the art after sales service with a “Customer First” approach anytime anywhere in the world with the best price for our customers.The genesis of our precision is due to our diverse origin, while we value our uniqueness and specific strengths of our team that takes us to perfection in tandem since our inception. We are a team of world class connected professionals with more than 1200 man years of engineering expertise to customize precision. We are headquartered at Ahmedabad, Gujarat in India with a state-of-the-art sales and service network across the globe.Deesha Impex R&D constantly monitors the industry transformations and in tandem with the manufacturing innovates the pioneering technologies with a quality perfection attitude customizes for customer satisfaction. These innovations have today produced a range of high quality precision testing equipments and created a range that caters to any testing machinery needs of the plastic industries of any size.

fUJAIrAH PLASTIC fACTOrY

STALL NO.: 504Mr. Bashar Diab, Marketing ManagerSharjah, UAETel: 009716 5423690, Fax: 009716 5423688Email: [email protected] | Web: www.fujairahplastic.com

Product/Company details:Fujairah Plastic Factory has been established in 1982 with our first plant in Fujairah. With the peerless product insight of Mr. Khalifa Al Kaabi, a UAE national and founder of the company, he led the evolution of Fujairah Plastic Factory meeting today’s challenges for commercial, industrial, and environmental leadership.The framework of our integrity advocated no less than top quality products for Polyethylene sheets and bags with added value in terms of stellar customer support and prompt delivery of customized solutions that comply with the rigid international standard of quality.Plastic Bags, Plastic Boutique Bags, Chicken Bag, Stretch Films, Shrink Films, Lamination Films, Other Packaging Food and Non Food Bads.

Page 23: Oman Plast - Event Catalogue

2nd OMAn InTERnATIOnAL PLASTICS, RUBBER And PACKAGInG IndUSTRY EXHIBITIOn 2014 21

GULf ACrYLIC INDUSTrIES L.L.C.

STALL NO.: 601Mr. Nadeem Ahmed, Asst. Manager SalesP.O. Box 31, Postal Code 327, Sohar Industrial Estate, Sultanate of OmanTel: 00968 26750510, Fax: 00968 26751762, GSM: 00968 99254864Email: [email protected] | Web: www.shamalplastics.com

Product/Company Details: We Gulf Acrylic Industries L.L.C./Shamal Plastics Industries L.L.C. are a global leader in sheet extrusion manufacturing of Polycarbonate, Acrylic, SAN, Polystyrene and PVC Rigid, Foam & Co-Extruded Sheets. A driving force in GCC since 2001 catering to the complete requirements of customers across Europe, Asia Pacific, Africa and Middle East. Evolving new ideas to meet the changing needs of the industry and offering the quality solutions to our respected clients.Our customers benefit from state of the art technologies with major applications of the Polycarbonate sheets in building & construction, walkways, skylight, roofing, signage, protective glazing; Acrylic sheets for advertising articles, furniture, lighting fixture, bath tub, domes; SAN sheets for light diffusers, food storage containers on a global basis.

GULf PACKAGING MACHINES JLT

STALL NO.: 201Mr. Ronald David, General ManagerP.O. Box 33467, Unit 3601, Armada Tower 2, Plot PH2-P2,Jumeirah Lakes Towers, Dubai, U. A. E.Tel: 00971 4 3927 401, Fax: 00971 4 3927 402, GSM: 00971 50 7789675Email: [email protected] | Web: www.gulfpackagingmachines-jlt.com

Product/Company Details: Exclusive Agent/Distributor of Newlong Machine Works Ltd., Tokyo, Japan.

Our products include:*Bag Closing Machines (Portable and Stationary Type)*Conveyors for Bag Closing Machines *Bag Sewing Machines for Paper, PP, PE & Jute Bags*Carpet Over-edging Machines *Heat Sealers for PE Film bags*Table, Stand & Motor *Sewing Thread for bag Closing Machines (250g/2kg/4kgs) *Spare Parts related to the above-mentioned machines

e x p e c t m o r e

OMAN’S FIRST AND ONLY E-NEWS PORTALOMAN’S FIRST AND

ONLY E-NEWS PORTALw w w . a k h b a r . o m

Page 24: Oman Plast - Event Catalogue

2nd OMAn InTERnATIOnAL PLASTICS, RUBBER And PACKAGInG IndUSTRY EXHIBITIOn 201422

GULf PLASTIC INDUSTrIES CO. (SAOG)

STALL NOS. 701 & 702Mr. Asok Kumar, General ManagerP.O. Box 55, Rusayl, Rusayl Industrial Estate, Postal Code 124, Sultanate of OmanTel: 00968 24446688/99, Fax: 00968 24446766, GSM: 00968 95962963Email: [email protected], [email protected]@gulfplasticoman.com | Web: www.gulfplasticoman.com

Product/Company details:Gulf Plastic Industries Co. S.A.O.C. is an ISO 9001:2008 certified public share holding company established in the year 1996, located in the Sultanate of Oman, Muscat-Rusyl Industrial area and is equipped with state if art machinery to produce various packaging products to international standards.Gulf Plastic Industries is one of the most advanced manufacturing industries in the Middle East engaged in the manufacture of Flexible Intermediate Bulk Containers, Polypropylene woven sacks, Polypropylene webbing, Polyethylene liners and Polystyrene cups and bowls.Our FIBC’s (Jumbo Bags) are branded as GULFPAC and the brand has established our presence in the domestic as well as overseas markets. The technology used in the making of the bags is from Star linger-Austria who are the world leader in the industrial line. All our FIBC’s are certified by an international certifying body named labor data – Germany. Our FIBC’s are mostly for filling chemical products, Fertilizers, Cement, Plastic polymers, sugar, Food grains, Salt, Sand, Agri-Products, Building materials, Seeds, Minerals etc.

GULf STAr LLC. (DArCHEM)

STALL NO.: 306Mr. Muhammed Shehzad, Sales ManagerP.O. Box 1761, Postal Cod 114, Muscat, Sultanate of OmanTel: 24501812, Fax: 24501812, GSM: 00968 98166143 Email: [email protected] | Web: www.darvesh.com

Product/Company details:Gulf Star LLC (Darchem) is a strategic business unit of Darvesh group dealing with wide range of branded chemical products to serve range of industries throughout sultanate of Oman, details as follows.

Sectors Served:Food & Beverages, Water & Metal treatment, Plastics Industries, Personal Care& Pharma, Oil & Gas, Specialty Chemicals, Paint/Coatings/inks & Fiber Glass, Rubber Chemicals, Lubricant & Fuel additives.

Product rangeAlcohols, Acetates, Aromatics/Hydrocarbons, Ketones, Monomers/Acrylytes, Oleo Chemicals, Intermediates, Chlorinated solvents, Plastisizers, Gycols/Gycol ethers, Polymers etc.

Page 25: Oman Plast - Event Catalogue

2nd OMAn InTERnATIOnAL PLASTICS, RUBBER And PACKAGInG IndUSTRY EXHIBITIOn 2014 23

MULTI TrADE fzC

STALL NO.: 205Mr. Asif Ahmed Butt, DirectorSaif Zone, SharjahTel: 00971 6 5570135, Fax: 0097165570136, GSM: 00971555066066 Email: [email protected] | Web: www.multitradegroup.com

Product/Company details:Multi Trade Fzc is trading plastic raw materials LDPE, LLDPE, HDPE, PP and PET. Our sister company Multi Industries is manufacturing safety helmets, construction buckets, paint buckets, food containers, pvc pipes, cable trays and compounds for pvc and film industry.

OCEAN rUBBEr LLC

STALL NO.: 302Mr. Rajesh Ramakrishnan, Senior Manager OperationsP.O. Box 521, Postal Code 133, Alkhuwair, MuscatTel: 00968 24482506, Fax: 00968 24482507, GSM: 00968 99881062Email: [email protected] | Web: www.oceanrubber.com

Product/Company Details: Suppliers of rubber products as per customers requirements, suppliers of products like bearing pads, Expansion joints, Marine Rubber Fenders, rubber seals, rubber gaskets, Rubber corner guards, rubber wall guards, rubber wheel stoppers, rubber speed humps, rubber lining services for pipes, tanks and vessels, riser pipes and clamps coating. All kinds of rubber conveyor belts, screen mesh (wired, PU and TPU), rollers, screen deck, design and supply of bulk material handling systems, including conveyor system for quarrying industries, cement and ready-mix factories other fertilizer industries.

OMAN POLYCON L.L.C.

STALL NO.: 102 Mr. Mubarak Hamood Al-Nabhani, Sales ManagerP.O. Box 2692, Ruwi, Postal Code 112, Sultanate of OmanTel: 24703770, 24700241, Fax: 24792980, GSM: 97889180Email: [email protected], [email protected] [email protected] | Web: www.hilalgroup.com

Product/Company details:Oman Polycon L.L.C started manufacturing a comprehensive range of International Food Quality Water storage tanks, Traffic cones and traffic road barriers, Plastic AC covers from its most modern plant in Nizwa Industrial Area from December 2002.It takes its legacy from Al Zamil Ltd, (Saudi Arabia) a pioneer of Polyethylene tanks industry in the Gulf Region. Tanks are manufactured to strict quality guidelines to ensure years of

Page 26: Oman Plast - Event Catalogue

2nd OMAn InTERnATIOnAL PLASTICS, RUBBER And PACKAGInG IndUSTRY EXHIBITIOn 201424

high performance use. Moreover, we use a raw material that meets International Food Grade specifications to ensure safe storage of potable water. We are using the Linear Low Density Polyethylene (LLDPE) that has good mechanical properties, high stiffness, capable of being welded (repaired), excellent environmental stress crack resistance which are being imported from SABIC one of the leading manufacturer’s of LLDPE across the Globe. The LLDPE used meets specifications contained in the International FDA and EU regulations for use in contact with food and potable water.

Rotationally moulded products made without pressure, are relatively stress-free compared to products made with high pressure processes. Therefore they are tough and long lasting. The different layers of the tank keeps the temperatureStabilized against ultraviolet rays of the Sun and therefore can be used indoors as well as outdoors.Seamless products- one piece, no joints and hence leak proof.Corrosion resistant (rust free) and maintenance free.Lighter than their metal counter-partsHave excellent load bearing qualities.Hygienic and eminently suitable for storage of potable water.

PALLETCO L.L.C.

STALL NO.: 505 & 506Mr. Haroon, Marketing ManagerP.O. Box 35719,Dubai Investment Part (DIP), Dubai, UAETel: 00971 4 8800773, Fax: 00971 4 8800798, GSM: 00971-50-9195035Email: [email protected], [email protected] | Web: www.palletco.ae

Product/Company Details: Palletco LLC is a well-known company engaged in the manufacture, import & distribution of a wide variety of premium plastic packaging products. Palletco’s product-mix includes Plastic Pallets, Spill Pallets, Plastic Pallet Boxes, Plastic Crates, Jerry Cans & Drums and Garbage Bins etc.

Operating for the last 15 years, Palletco L.L.C. is unanimously acknowledged as an undisputed market leader providing top quality products to its customers in the field of Airports, Airlines, Pharmaceuticals, Food Processing, Beverage Industry, Retailing, Agriculture, Petrochemicals, Warehousing, and Logistics, Automotive etc.

Setting high standards in customer service, Palletco LLC manages a long list highly satisfied customers all over Gulf, Middle East & Africa. Always driven by customer-focus & quality standards, Palletco LLC keeps investing in newer technology, equipments & space not only to uphold its regional leadership role but also to meet global standards of plastic packaging systems.

Page 27: Oman Plast - Event Catalogue

2nd OMAn InTERnATIOnAL PLASTICS, RUBBER And PACKAGInG IndUSTRY EXHIBITIOn 2014 25

POLYTHENE & PLASTIC PrODUCTS CO. L.L.C.

STALL NO.: 501Mr. Dasney Pereira, Marketing ManagerP.O. Box 2560, Ruwi, Postal Code 112, Muscat, Sultanate of OmanTel: 00968 24814212, 24817313, Fax: 00968 24814018, GSM: 00968 96176184Email: [email protected], www.polytheneplastics.com

Product/Company details:The company is the pioneer in manufacturing plastic related products catering for a diverse market i.e., household, packaging and the Industrial sector. We manufacture a wide range of products such as shopping bags, bakery bags, garbage bags, polythene sheets, caution tapes, stretch film and binding straps. The Manufacturing activities of the company are carried out in our state-of-the art and are well-equipped with the most modern machinery for manufacturing of high quality products

QATAr POLYMEr INDUSTrIAL COMPANY

STALL NO.: 503Mr Majid Siddiqui, Sales ManagerSt: 38, Gate: 99, Salwa Industrial Area, P.O. Box 33195, Doha, QatarTel: 00974 44913913/44421250 , Fax: 00974 44438963/44913914 Mob: 00974 55860449 Email: [email protected] | Web: www.qatarpac.net

Product/Company details:Qatar Polymer produces a wide range of products used in many Industries and sectors PP Woven Bags, PP Woven Jumbo bags, PP Woven Fabric Rolls (laminated/unlamented), PE. Liner/Film Rolls/Bags on roll/Garbage bags.

rAfIQ BUrGHLI GrOUP/JOrDAN MINErALS EST.

STALL NO.: 301 Mr. Bandar Burghli, International SalesP.O. Box 926979, Amman - 11190, JordanTel: 00962 6 5602794–5603794, Fax: 00962 6 5652335, GSM: 00962 795314245Email: [email protected] | Web: www.jordan-minerals.com

Product/Company Details: Jordan Minerals Est./JME is a significant manufacturer of Ground Calcium Carbonate; Natural & Surface Treated, filler for several industries applications; Paper, Polymers, Coating Applications, among others. Our products are graded from superfine 90%<2 micron up to granular. JME is working under management system as per EN ISO 9001:2008 and has achieved IFANCA Halal Product Certificate for three different grades. JME is also a member of Jordan Institution for Standards and Metrology and has achieved its Certificate JQM 101101.

Page 28: Oman Plast - Event Catalogue

2nd OMAn InTERnATIOnAL PLASTICS, RUBBER And PACKAGInG IndUSTRY EXHIBITIOn 201426

International Plastics News – Middle East & Africa hasestablished itself as a leading source of exclusive content and technical articles prepared and written by a team of editorial and industry experts from Ringier Trade Media.

To learn how to get more high quality sales leads, please contact:Toll Free Hotline: 800-820-0083 (within Mainland China)800-1122-8811 (outside of Mainland China)

Mr. Mike Hay, PresidentT e l : +852 2369 8788 Ext 11Email: [email protected]

The print magazine, its electronic newsletters and vertical, digital e-magazine and fully interactive magazine Apps with video links on iTunes and Google Play, reach decision-makers in the plastics and rubber industry of Middle East and Africa, and other parts of the world.

International Plastics News – Middle East & Africa

Target Buyers in over 26 Countries across the Middle East & Africa

Anytime, Anywhere → Offline Reading

Scan this QR code to download our APP

Page 29: Oman Plast - Event Catalogue

2nd OMAn InTERnATIOnAL PLASTICS, RUBBER And PACKAGInG IndUSTRY EXHIBITIOn 2014 27

SHAMAL PLASTIC INDUSTrIES L.L.C.

STALL NO.: 602Mr. Nitin Kulkarni, General ManagerP.O. Box 31, Postal Code 327, Sohar Industrial Estate, Sultanate of OmanTel: 00968 26750510, Fax: 00968 26751762, GSM: 00968 99254864Email: [email protected] | Web: www.shamalplastics.com

Product/Company Details: We Gulf Acrylic Industries L.L.C./Shamal Plastics Industries L.L.C. are a global leader in sheet extrusion manufacturing of Polycarbonate, Acrylic, SAN, Polystyrene and PVC Rigid, Foam & Co-Extruded Sheets. A driving force in GCC since 2001 catering to the complete requirements of customers across Europe, Asia Pacific, Africa and Middle East. Evolving new ideas to meet the changing needs of the industry and offering the quality solutions to our respected clients.Our customers benefit from state of the art technologies with major applications of the Polycarbonate sheets in building & construction, walkways, skylight, roofing, signage, protective glazing; Acrylic sheets for advertising articles, furniture, lighting fixture, bath tub, domes; SAN sheets for light diffusers, food storage containers on a global basis.

SJS GrOUP (OMAN)

STALL NOS. 402Ms. beatriz pereira, General ManagerP.O. Box 2058, Ruwi, Postal Code 112, Sultanate of OmanTel: 00968 24789680, Fax: 00968 24751019, GSM: 00968 99822501Email: [email protected] | Web: www.sjsoman.com

Products/Services:SJS Group is a 100% Omani (SME) company owned by Ahmed Saleh Baabood with its core activities listed under divisions such as; advertising, publishing, e-solutions, interiors & events and we are also currently in process of establishing our own offices in the GCC region which would begin operations in the 3rd.Quarter of 2014 and look forward to strengthening our existence. Established in 2001, SJS Group launched its services with a vision of being a young and dynamic company wanting to place its mark in today’s creative and innovative advertising world; and at present with over a decade or existence; we contentedly see our efforts have met with more than a fair degree of success.

Our expertise lies in creative & professional work and we aspire to undertake turnkey projects irrespective of our client’s budget – in short we help “build brands.” Our specialist divisions converge and work in tandem to meet the needs of clients and reinforcing their positioning in the market. Our areas of operations span a wide range including: planning, designing & executing advertisement campaigns, events for consumer & industrial products and today we have positioned ourselves as an exceptionally innovative and a professionally managed business enterprise.

Page 30: Oman Plast - Event Catalogue

2nd OMAn InTERnATIOnAL PLASTICS, RUBBER And PACKAGInG IndUSTRY EXHIBITIOn 201428

SOCIETY Of PLASTIC ENGINEErS MIDDLE EAST

STALL NO.: 939Dr. Raed Al-Zubi, President Vice President - Society of Plastic Engineers, U.S.A., Dubai, U.A.EGSM: 00971 507501765 Email: [email protected]

Product/Company details:Association of Plastic Engineers

SUPrEME rUBBEr L.L.C.

STALL NO.: 204Mr. Rajasekharan Sukumaran Nair, Sales ManagerAl Hamra Industrial Area, P.O. Box 14581, Ras Al Khaimah, UAETel: 00971 7 2432780, Fax: 00971 7 2432781Email: [email protected] | Web: www.suprenerubberuae.com

Product/Company Details: Rubber Moulding, EPDM Profile Extrusion, Sponge Extrusion, Silicon Profile Extrusion, PVC Extrusion, Marine Fenders, Poly Urethane products, Printing Rollers, Rubber Sheets, Rubber Lining.

TECHNO PLASTIC INDUSTrY

STALL NO.: 403 Mr. Prakash Appadurai, General ManagerP.O. Box 158, Al Rusail, Postal Code 124, Muscat, Sultanate of OmanTel: 00968 24446290, Fax: 00968 24446690Email: [email protected]

Product/Company Details: Manufacturer of PP-R (Poly Propylene, Random Co polymer) pipes and fittings used for hot and cold water transmission

TECHNOVAA OMAN LLC. (DArVESH GrOUP)

STALL NO.: 305 Mr. M. Abdul Raheem, General ManagerP.O Box 174, Postal Code 114, Muscat, Oman Tel: 00968 24595273, Fax: 00968 24595278, GSM: 00968 98165104Email: [email protected] | Web: www.darvesh.com

Page 31: Oman Plast - Event Catalogue

2nd OMAn InTERnATIOnAL PLASTICS, RUBBER And PACKAGInG IndUSTRY EXHIBITIOn 2014 29

Product/Company Details: We (TECHNOVAA OMAN LLC) are pleased to introduce ourselves, as the largest packaging film manufacturer in Oman. TECHNOVAA INDUSTRIES is a multinational company, started its operation in Dubai, UAE in the year 1997 and is a part of DARVESH (credibility since 1909) is operating in South Africa, India, Portugal, Nigeria and We have the pleasure to inform you that TECHNOVAA is starting its operations with 7800MT/annum capacity in Oman by June 2014. TECHNOVAA is the industrial arm of the group and provides quality driven, cost effective and innovative tailor made Industrial solutions. Primarily started with packaging industry, TECHNOVAA found a niche for itself as key manufacturer of Technical Packaging Films. Utilizing the blown and cast extrusion process, TECHNOVAA produces a variety of technical films for respective applications making it one of the largest plastic film producers in the region.

Manufacturer of Masking Tapes, BOPP Tapes, Printed Tapes, SpecialOffer Tapes, Colour Tapes, Double Sided Tapes.STRETCH FILMS - HAND GRADE & MACHINE GRADE.PE SHRINK FILMSPOF SHRINK FILMS - ITALYCLING FILM - FOOD GRADEWOVEN SACS - ALL SIZESFOAM ROLL - FOR Cushion PackingALUMINIUM FOIL TAPES - For Consumer & Catering PackingOther Packaging Materials Including Nylon Ropes, Corrugated Rolls,Air Bubble Rolls, Duct Insulation Tapes, PP Straps, Wax PaperCorner Protection Board & PP String

Page 32: Oman Plast - Event Catalogue

2nd OMAn InTERnATIOnAL PLASTICS, RUBBER And PACKAGInG IndUSTRY EXHIBITIOn 201430

TrADEKEY PVT LTD

STALL NO.: 941Mr. Shoaib Mithani, Project Manager TradeKey (Pvt.) Limited, Ebrahim Ali Bhai Tower 5th Floor, Plot No. 27/3, Survey Street No. 35-P/1 Block 7/8, Modern Cooperative Housing Society Ltd., Shahra-e-Faisal, Karachi, PakistanTel: 0092-21-111-111-539 Ext. 668 , Fax: 0092-21-4383196Mob: 00923232327927 Email: [email protected] | Web:www.tradekey.com

Product/Company Details: “TradeKey.com is the fastest growing and leading company across the globe, an E-commerce business-to-business (B2B) portal that connects the buyers and sellers across the worlds for tradeand service. We are with a mission to help the world do business elegantly, we was established in 2005 and now with 7.5 million buyers and sellers Tradekey.com is one of the largest B2B portal of the world.TradeKey.com provides a bridge for small businesses to convert into multinational market players by assuring them a state of the art online base using which they can present their products and services globally, find genuine buyers, satisfy their buying needs and explore regional and international business opportunities is the main that we assure to our members. We are first B2B marketplace that attain Google Page Rank 8 and earned ISO 9001 Quality Management System and ISO 27001 Information Security System certifications to ensure maximum customer satisfaction, security and safe online trading. TradeKey.com is a multinational company now and it has offices in Saudi Arabia, China and Pakistan, and its partners are located in various countries across the world. “

UNITED GULf PIPE MANUfACTUrING CO. L.L.C.

STALL NOS. 603–906, 801, 802, 901, 902

Mr. Eng. Mohammed Al Hashani, Managing DirectorMr. G. Sitaraman, Factory ManagerPlot # 234, Road 20, Rusayl Industrial Estate, P. O. Box 419, Al Khodh, Postal Code 132Sultanate of OmanTel: 00968 24447056, Fax: 00968 24447055, GSM: 00968 95328727Email: [email protected] | Web: www.ugpm.net

Product/Company Details: Equipped with cutting edge German technology, UGPM is a leading manufacturer and supplier of HDPE pipes (pressure & gravity), manholes, house connections, Outfall pipelines and other fabricated items for the water supply and drainage industries in the Sultanate of Oman. Utilizing unique and innovative manufacturing technologies from

Page 33: Oman Plast - Event Catalogue

2nd OMAn InTERnATIOnAL PLASTICS, RUBBER And PACKAGInG IndUSTRY EXHIBITIOn 2014 31

Krah, Germany, it produces high quality plastic products serving primarily applications in water and drainage industries. The company works hand in hand with the three C’s (Client, Consultant and Contractor) utilizing complex calculation techniques to arrive at a customized product that meets specific requirements. Products developed are highly cost effective, with long life, meeting environment concerns, keeping delivery schedules in mind, low maintenance costs, homogenous products using specialized welding techniques for secure jointing, for quick and easy installations without additional training or expensive equipment. Given the nature of the products, the applications and the stringent requirements from the 3 C’s, the company places maximum emphasis on the quality department and has achieved 9001, 14001 and 18001 certifications. In addition, the company provides technical training for its products from reputed worldwide companies, thus emphasizing the importance it places on its long term relationships with the 3 C’s.

VIESHESH POLY IMPEX

STALL NO.: 404Mr. Sanjay Agrawal, Director405 Durga, A-8 Veera Industrial Est, Fun Republic Lane, Off Veera Desai Road Andheri West, Mumbai - 400053Tel: 0091 22-40169963 Fax : 0091-22-26736522, GSM : 0091 9821014454Email: [email protected] | Web: www.polymermis.com

Product/Company Details: Polymer MIS (Polymer Market Intelligence Sources) provides SMS, Whatsapp, BB, Android, ios & Web based alerts for a wide range of Petrochemical Products like PP, HDPE, LDPE, LLDPE, EVA, PVC, PET, ABS, SAN, GPPS, HIPS etc. and Feed stocks including Naphtha, Ethylene, Propylene, EDC, VCM, Styrene Monomer, Aromatics and Petrochemical Intermediates. We bring to you on the Real time basis with Breaking News as it happens, including Market Trends, Quotes, Moves, Analysis, Data, Predictions and much more. We provide everything you need to know to stay informed and react to changing market conditions of Plastic Industry worldwide.

W.J. TOWEL & CO. L.L.C. (PET DIVISION)

STALL NO.: 502 Mr. Mohammed Haider Al Lawatia, AccountantP.O. Box 1040, Ruwi, Postal Code 112, Sultanate of OmanTel: 00968 24526000, Fax: 00968 24526270, GSM: 94054958Email: [email protected] | Web: www.wjtowell.com

Product/Company Details: Our factory; which is located at Al Rusayl Industrial Estate (Road No. 11) is the first in the middle east, which produces PET bottles with inserted P.P. handles and is presently one of

Page 34: Oman Plast - Event Catalogue

2nd OMAn InTERnATIOnAL PLASTICS, RUBBER And PACKAGInG IndUSTRY EXHIBITIOn 201432

the few companies in the Sultanate of Oman, engaged in the commercial production of PET bottles and Jars, having wide application in the edible oil industry, juice and beverage industry, mineral water industry, food stuff packaging industry, hand wash soaps etc. Our Company has the capacity of producing bottles of different sizes ranging from 200 ml to 6000 ml and jars ranging from 150 ml to 4000 ml.

zAYANI POLYMEr fACTOrY W.L.L.

STALL NO.: 303Mr. Varghese Karakkal, General ManagerP.O. Box 5748, Manama, Kingdom of BahrainTel: 00973 17290802, Fax: 00973 17290520, GSM: 00973 39617620Email: [email protected]

Product/Company Details: Zayani Polymer Factory, a division of J.A. Zayani & Sons group, Manufactures Polypropylene (PP) woven sacks, Polyethylene (PE) Green House sheets, Construction Rolls, Trash bags, Shopping bags, Liner bags, Sheet Rolls and plastics for all packaging purposes. PP Woven Sacks are heavy duty dust proof, water/oil/tear/puncture resistant bags perfect for packing and shipping wheat, rice, sugar, seeds, fertilizer, cement, parts, rocks, chains & metal alloys.We produce and supply PP woven sacks with specifications to match the mesh size, denier and GSM with customized design and colours.PE Green house sheets are widely used in agriculture for smart vegetation to protect the plants from harsh weather conditions and increase productivity. PE Construction rolls work as an all purpose cover, vapor barrier, dust barrier, landscaping and concrete curing cover in the construction industry.We cater to the local as well as GCC & Middle East markets. Zayani Polymer Factory stands for quality, prompt and consistent supply of environment friendly products. Our state of the art factory in Bahrain has facilities to meet various requirements as per customer’s choice at very competitive rates and prompt delivery schedule.

R E U S ER E D U C ER E C Y C L E

R E U S ER E D U C ER E C Y C L E

Page 35: Oman Plast - Event Catalogue

2nd OMAn InTERnATIOnAL PLASTICS, RUBBER And PACKAGInG IndUSTRY EXHIBITIOn 2014 33

Page 36: Oman Plast - Event Catalogue

2nd OMAn InTERnATIOnAL PLASTICS, RUBBER And PACKAGInG IndUSTRY EXHIBITIOn 201434

al-FElaIj PlaSTICS

INNOVATIVE PrODUCTS fOr MODErN LIVING

Since its inception in 1980, Al Felaij Trading & Contracting L.L.C (Plastics Division) has been an undisputed market leader in Oman and the Middle East, catering to the requirements of household products, the packaging industry, and the agriculture sector.

Today, Al Felaij Plastics has a product base of over a thousand different products in the market. The company believes in continuous research and development on products to meet new customer requirements. The marketing team of the company makes sure the customer feedback on current products and comments for improvement are given importance. The team analyzes market requirements to keep introducing new products in the market.

Al Felaij Plastics prides itself on being a pioneer in the household sector with 70 percent share of the domestic market for household plastic products. More than 80 percent of the production capacity of Al Felaij is dedicated to the household sector. Al Felaij Plastics believes in supporting the local market by prioritizing selling products in Oman, and then exporting all over the Middle East.

The product basket of Al Felaij Plastics includes a wide range of items catering to both the consumer and business sectors. Products in the consumer sector such as buckets, drums, different types of racks, basins, are the major sellers in the market. The company also has a strong penetration in the garden furniture sector with different designs of garden chairs and tables introduced in the market.

Al Felaij has also proved to be a valued supplier of plastic packaging for the other business sectors in the market which include industries of detergent, chocolate, dates, sweets, and agriculture etc. The business industry relies on Al Felaij Plastics to provide quality packaging solutions in both bottling and containers.

INNOVATIVE PRODUCTS FOR

MODERN LIVING!

P.O.Box 2266, Ruwi, PC 112, Sultanate of Oman Tel.: +968 24814481, +968 24810532 Fax: +968 24811352Email: [email protected]

AL-FELAIJTRADING & CONTRACTING L.L.C (PLASTICS DIVISION)

Page 37: Oman Plast - Event Catalogue

2nd OMAn InTERnATIOnAL PLASTICS, RUBBER And PACKAGInG IndUSTRY EXHIBITIOn 2014 35

INNOVATIVE PRODUCTS FOR

MODERN LIVING!

P.O.Box 2266, Ruwi, PC 112, Sultanate of Oman Tel.: +968 24814481, +968 24810532 Fax: +968 24811352Email: [email protected]

AL-FELAIJTRADING & CONTRACTING L.L.C (PLASTICS DIVISION)

Page 38: Oman Plast - Event Catalogue

2nd OMAn InTERnATIOnAL PLASTICS, RUBBER And PACKAGInG IndUSTRY EXHIBITIOn 201436

Official Arabic Business Daily: Photo & Video Support: Sound & Lights Support: Venue:

Exclusive Bronze Sponsor:

Community Networking Partner:Digital & Social Media Partner: Website Design & Support:

INTERACTIVESYNERGY

Online Media Partner:Category Patron - Hospitality

The

ofOman

F&BGUILD

Estd. 2012

Official Portal:

BE IN THE SPOTLIGHTTAKE YOUR BRAND IDENTITY

ACROSS BORDERS

Member: Presenter:In Association with:

REGISTRATIONS NOW OPEN

GRAND FINALE 14TH APRIL, 2014

AL BUSTAN PALACE HOTEL

REGISTER YOUR WEBSITE TODAY ON

FOR SPONSORSHIP PLEASE CONTACT:BETTY NORONHA 99822501 • NAVEED SHARIF 95223963

BLAKE VAZ 94148084 • SHERIL D’SOUZA 94148083

Page 39: Oman Plast - Event Catalogue

Official Arabic Business Daily: Photo & Video Support: Sound & Lights Support: Venue:

Exclusive Bronze Sponsor:

Community Networking Partner:Digital & Social Media Partner: Website Design & Support:

INTERACTIVESYNERGY

Online Media Partner:Category Patron - Hospitality

The

ofOman

F&BGUILD

Estd. 2012

Official Portal:

BE IN THE SPOTLIGHTTAKE YOUR BRAND IDENTITY

ACROSS BORDERS

Member: Presenter:In Association with:

REGISTRATIONS NOW OPEN

GRAND FINALE 14TH APRIL, 2014

AL BUSTAN PALACE HOTEL

REGISTER YOUR WEBSITE TODAY ON

FOR SPONSORSHIP PLEASE CONTACT:BETTY NORONHA 99822501 • NAVEED SHARIF 95223963

BLAKE VAZ 94148084 • SHERIL D’SOUZA 94148083

Page 40: Oman Plast - Event Catalogue

2nd OMAn InTERnATIOnAL PLASTICS, RUBBER And PACKAGInG IndUSTRY EXHIBITIOn 201438

Polythene & Plastic Products Co. LLC

PO Box: 2560, PC: 112, Ruwi, Sultanate of OmanTel.: +968 24814312 / 24817313 • Fax:+968 24813190

E-mail: [email protected] • www.polytheneplastics.com

The company that is a pioneer in manufacturing plastic related products catering for a diverse market i.e., household, packaging and the Industrial sectors. We manufacture a wide range of products such as shopping bags, bakery bags, garbage bags, polythene sheets, caution tapes, stretch film & binding straps. The Manufacturing activities of the company are carried out in our state-of-the art factories and are well-equipped with the most modern

machinery for manufacturing of high quality products.

Page 41: Oman Plast - Event Catalogue

2nd OMAn InTERnATIOnAL PLASTICS, RUBBER And PACKAGInG IndUSTRY EXHIBITIOn 2014 39

PolyTHEnE anD PlaSTIC ProDUCTS

PrODUCTS:Our company manufactures a wide range of Plastic Bags, polythene sheets, caution tapes for electrical/gas/water connections, stretch film and binding straps for packing of cartoons, disposable table sheets etc. Our main line of products include:-

• Plain and Printed Polythene Bags (up to 8 colors)• Films and Tubing Rolls • Plain and Printed Polypropylene Bags (PP Bags)• Polythene Shrink Films • Caution Tapes • LDPE Construction Sheet • HDPE Polythene Sheet • BOPP Plain & Printed • Binding Straps

These plastic packaging products find extensive application In a wide range of industries. Allied Plastics caters to the following industries:

• Confectionery Industry • Food Processing Industry • Stationery Industry • Chemicals and Fertilizer Industry • Textile Industry • Packaging Industry • Petrochemical Industry • Pharmaceutical Industry • Construction Purpose

HDPE (PLAIN & PrINTED fOr ALL ITEMS)• Shopping Bags• Garbage Bags• Seat Covers• Liner Bags (Small Garbage bag)• Table Sheet (Sofra)• Textile Bags (Punch Handle)

LDPE : (PLAIN & PrINTED fOr ALL ITEMS)• Textile Bags-Bottom Gusset• Bakery Bags • Plant Bags• Packing Bags (Daal, Nuts, Spices, Rice & Sugar etc.)• Laundry Bags and Rolls • Shrink Wrapping (Shrink Film)Roll• LDPE Sheet Roll (Construction Polythene Sheet)• LDPE Trash Bags & Liner Bags• Caution Tape• Henna Bags & Sheet • LDPE Tubing Rolls• LDPE Jumbo Bags

PP: (PLAIN & PrINTED fOr ALL ITEMS)• PP Packing Bags (Daal, Nuts & Spices ..etc)• PP Bakery Bags• PP Binding Straps

BOPP & CPP (PLAIN & PrINTED)• Bakery Bag and Roll• Surface Printing for Outer bags • Spices

NOTE: SizES & ThickNESS aS pEr yOur rEquirEmENTS

BINDING STrAPS:

WIDTH THICKNESS LENGTH /MTrS

12 mm 0.5 / 0.6 mm 1000/2000/3000

15 mm 0.5 / 0.6 mm 1000/1500/2000

18 mm 0.5 / 0.6 mm 1000/1500/2000

All Rolls have the certification for the Ministry of Measurements and Units under the British Certification.

LDPE SHEET rOLL (CONSTrUCTION POLYTHENE rOLL)

Width=3.6mtr x Length=28mtr= [1002mtrs] Thickness: 1500 g

Width=3.6mtr x Length=28mtr= [1002mtrs] Thickness: 1200 g

Width=3.6mtr x Length=28mtr= [1002mtrs] Thickness: 1000 g

Width=3.6mtr x Length=28mtr= [1002mtrs] Thickness: 500 g

Polythene & Plastic Products Co. LLC

PO Box: 2560, PC: 112, Ruwi, Sultanate of OmanTel.: +968 24814312 / 24817313 • Fax:+968 24813190

E-mail: [email protected] • www.polytheneplastics.com

The company that is a pioneer in manufacturing plastic related products catering for a diverse market i.e., household, packaging and the Industrial sectors. We manufacture a wide range of products such as shopping bags, bakery bags, garbage bags, polythene sheets, caution tapes, stretch film & binding straps. The Manufacturing activities of the company are carried out in our state-of-the art factories and are well-equipped with the most modern

machinery for manufacturing of high quality products.

Page 42: Oman Plast - Event Catalogue

2nd OMAn InTERnATIOnAL PLASTICS, RUBBER And PACKAGInG IndUSTRY EXHIBITIOn 201440

A large number of plastic containers and bags are used on a daily basis. Plastic waste is one of the biggest causes for increased water and soil pollution. Plastic recycling offers one of the best solutions to the increased plastic waste in the environment. Plastic recycling is the process of breaking down used scrap and waste plastics to recover usable material for the manufacturing industry. Plastic comprises of a large number of resins and complex chemical structures that are melted down to create new fibers.

Plastic recycling is a complex procedure. Plastic recycling industries can face a large number of unique challenges. One of the key principles to be followed while recycling plastic is that different types of plastics cannot be mixed before recycling. Plastics of different polymer structures and resin composition are identified by using standard codes on the basis of their melting and crushing capacity. Plastic materials identified under a particular code can be mixed and recycled with other plastics of the same code. Plastic materials consist of a few dyes, fillers, and additives, which are not easily recyclable.

The obstacles of recycling plastic can be overcome by using an elaborate monomer recycling process wherein the polymer undergoes an inverse polymer reaction of what was used to manufacture it. The end product of this procedure is a mix of chemicals that form the original polymer, which is further purified and synthesized to form a new polymer of the same type. Another solution to the problem is the use of a thermal de-polymerization process, which involves conversion of assorted polymers into petroleum. The procedure accepts the mixing of any type of polymer.

Plastic recycling can be used to recycle plastic container of different types. Plastic containers such as milk bottles, soapboxes, and juice and water bottles are recycled on a common basis. Grocery sacks and plastic bags are some of the other plastic products that can be recycled.

A plethora of websites on the Internet provides detailed information about recycling plastic along with its benefits.

rECyClInG PlaSTIC

Page 43: Oman Plast - Event Catalogue
Page 44: Oman Plast - Event Catalogue