Olympus Cam Manual

download Olympus Cam Manual

of 89

Transcript of Olympus Cam Manual

  • 8/8/2019 Olympus Cam Manual

    1/89

    DIGITAL CAMERA

    InstructionManual

    Getting to know your

    camera better

    Quick Start Guide

    Button operations

    Menu operations

    Printing pictures

    Using OLYMPUS Master

    Appendix

    SP-570UZ

  • 8/8/2019 Olympus Cam Manual

    2/89

    2 EN

    Contents

    Quick Start Guide P.3

    Camera diagram P.11 Learn the names of the camera partsand get a general grasp of the

    cameras functions. Use this sectionas reference for the functions.

    Button operations P.16Test out the functions of the camerabuttons by following the illustrations

    and trying them out on the camera.

    Operations using the control panel P.29 Learn how to use the control panel toperform basic operations, and then trythem out.

    Menu operations P.32 Learn everything about the menus,from basic operations to the functions

    of each menu and their varioussettings.

    Printing pictures P.59Learn how to print pictures you havetaken.

    Using OLYMPUS Master P.64Learn how to transfer and savepictures to a computer.

    Getting to know your camera better P.68Find out more about your camera and

    learn what to do when you have aquestion regarding operations.

    Appendix P.81Read about convenient functions andsafety precautions on how to use your

    camera more effectively.

  • 8/8/2019 Olympus Cam Manual

    3/89

    EN 3

    QuickStartGuide

    Gather these items (box contents)

    Pull the strap tight so that it does not come loose.

    Digital Camera StrapLens Cap

    Lens Cap String

    AA Batteries (four) USB cable AV Cable OLYMPUS Master 2

    CD-ROM

    Items not shown: Instruction Manual (this manual), warranty card.

    Contents may vary depending on purchase location.

    Attach the strap and the lens cap

    34

    Attach the strap to the other eyelet

    in the same manner.

  • 8/8/2019 Olympus Cam Manual

    4/89

    4 EN

    QuickStartGuide

    Prepare the camera

    a. Load batteries into the camera

    1

    2

    3

    5

    6

    7

    4

    Slide the battery compartment

    lock from) to= and ensurethat the battery compartment

    cover is securely locked (7).Failure to do so may cause the

    battery compartment cover toopen during shooting and the

    batteries to fall out, resulting in

    loss of image data.

    Battery compartmentlock

  • 8/8/2019 Olympus Cam Manual

    5/89

    EN 5

    QuickStartGuide

    Prepare the camera

    b. Insert the (optional) xD-Picture Card into the camera

    This camera allows you to take pictures without using an optional xD-

    Picture Card (hereinafter called the card). When taking pictureswithout the card, pictures will be stored in the internal memory.

    For details on the card, please refer to The card (P.85).

    4

    5

    3

    21

    Card cover

    Notch

    Contact area

    Make sure the card is correctly

    oriented and insert it straight into

    the card slot.Insert the card until it clicks into place.

    To remove the card, push it all the way

    in, release it slowly and remove.

  • 8/8/2019 Olympus Cam Manual

    6/89

    6 EN

    QuickStartGuide

    Turn the camera on

    This explains how to turn on the camera in shooting mode.

    a. Set the mode dial toh.

    Still picture shooting modes

    b. Remove the lens cap and set the cameras power

    switch to ON.

    To turn off the camera, set the power switch to OFF.

    h The camera determines the optimum settings for the shooting conditions

    automatically.P The camera automatically sets the optimum aperture value and shutter speed.A This function allows you to change the aperture manually.S This function allows you to change the shutter speed manually.M This function allows you to change the aperture and shutter speed manually.r This function allows you to set each shooting function manually and use as

    your original shooting mode.

    s This function allows you to shoot pictures by selecting a scene according tothe shooting condition.

    g This function allows you to set the target items by following the shootingguide displayed on the screen.

    When shooting movies(shooting mode)

    When shootingstill pictures

    (shooting mode)

    When viewing pictures(playback mode)

    When the date and time havenot yet been set, this screenwill appear.

    X

    Y M

    Y M D

    D TIME

    ---- -- -- -- --

    MENUCANCELPower switch

    Tips

    The directions of the arrow pad are indicated with

    1243 in this manual.4 3

    2

    1

  • 8/8/2019 Olympus Cam Manual

    7/89

    EN 7

    QuickStartGuide

    Set date and time

    a. Press the1z button and the2Y button toselect [Y]. The first two digits of [Y] are fixed.

    b. Press the 3# button.

    c. Press the1z button and the2Y button to select [M].

    About the date and time setting screen

    Y-M-D (Year-Month-Day)

    Exits a setting.

    Minute

    Date formats (Y/M/D, M/D/Y, D/M/Y)

    Hour

    X

    Y M

    Y M D

    D TIME

    ---- -- -- -- --

    MENUCANCEL

    1 z button

    2Y button

    2008 -- -- -- --

    X

    Y M

    Y M D

    D TIME

    MENUCANCEL

    3# button

    2008 08 -- -- --

    X

    Y M

    Y M D

    D TIME

    MENUCANCEL

  • 8/8/2019 Olympus Cam Manual

    8/89

    8 EN

    QuickStartGuide

    Set date and time

    d. Press the 3# button.e. Press the1z button and the2Y button to select [D].f. Press the 3# button.g. Press the1z button and the2Y button to select the hours

    and minutes. The time is displayed in the 24-hour

    format.

    h. Press the 3# button.i. Press the1z button and the2Y button to select [Y/M/D].j. After all items have been set,

    press theo button. For precise time setting, press the o button as the time signal

    strikes 00 seconds.

    2008 08 26 -- --

    X

    Y M

    Y M D

    D TIME

    MENUCANCEL

    2008 08 26 12 30

    OK

    X

    Y M

    Y M D

    D TIME

    MENUCANCEL SET

    2008 08 26 12 30

    OK

    X

    Y M D

    TIME

    MENUCANCEL SET

    YY MM DD

    o button

    10M10M44IN

    AUTO

    NORMNORM

    The number of remaining still

    pictures is displayed.

  • 8/8/2019 Olympus Cam Manual

    9/89

    EN 9

    QuickStartGuide

    Take a picture

    a. Hold the camera

    b. Focus

    The AF target mark lights in green when the focus and exposureare locked. The shutter speed and aperture value are displayed.

    If the AF target mark blinks in red, the focus is not adjusted

    properly. Try locking the focus again.c. Shoot

    a. Press theu button.b. While looking through the

    viewfinder, rotate the diopteradjustment dial little by little.

    When you can see the icons in theviewfinder clearly, adjustment iscomplete.

    10M10M44IN

    AUTO

    NORMNORM

    Horizontal grip Vertical grip

    Shutter button

    AF target mark

    1/4001/400 F3.5F3.5

    AUTO

    (PressedHalfway)

    Shutter button

    The card access lamp blinks.

    (PressedCompletely)

    Adjusting the viewfinders focus using the diopter

    Diopter adjustment dial

    u button

    Viewfinder

  • 8/8/2019 Olympus Cam Manual

    10/89

    10 EN

    QuickStartGuide

    View pictures

    a. Set the mode dial toq.

    a. Press the4& button and the3# button to displaythe picture you want to erase.

    b. Press thef/S button.

    c. Press the1z button to select [YES], and presstheo button to erase the picture.

    Arrow pad

    Next Picture

    Prev. Picture

    Mode Dial

    11IN10M10M

    2008.08.262008.08.26 12:3012:30 100-0001100-0001NORMNORM

    Erase pictures

    ERASEERASE

    OK

    IN

    NONOYES

    SETCANCEL MENU

    f/S button

    3# button4& button

    1 z button

    o button

    INRASEERASE

    NO

    YESYES

    OKSETCANCEL MENU

  • 8/8/2019 Olympus Cam Manual

    11/89

    EN 11

    Camera diagram

    Camera

    Flash (P.23, P.43)

    Microphone

    Strap Eyelet (P.3)Lens

    Shutter Button(P.9, P.21)

    F Button (ExposureCompensation) (P.22)

    Strap Eyelet (P.3)

    AF/MF Switch(P.24)

    j Button (Drive)(P.24)

    #UP Button (Flash Pop-up)(P.23)

    Connector Cover

    (P.56, P.59, P.65)

    Multi-connector

    (P.56, P.59, P.65)

    DC-IN Jack(P.86)

    Card Cover (P.5)

    Card Slot (P.5)

    Self-Timer Lamp/AF Illuminator

    (P.28, P.38, P.42)

  • 8/8/2019 Olympus Cam Manual

    12/89

    12 EN

    Zoom Ring(P.21)

    Hot Shoe(P.82)

    Mode Dial(P.6, P.16)

    Control Dial(P.22)

    Power Switch(P.6, P.16)

    Tripod Socket

    Speaker

    Battery CompartmentCover (P.4)

    Battery CompartmentLock (P.4)

    Monitor(P.13, P.54)

    DISP./E Button(P.26)

    m Button(P.25)

    f/S Button

    (Shadow AdjustmentTechnology/Erase)(P.25)

    Arrow Pad (P.27)

    o Button(OK/FUNC)(P.28)

    u Button (Monitor/Viewfinder)

    (P.22)AELAFL/m Button(AE Lock, AF Lock/SequentialPlayback) (P.23)

    q/P Button(Playback/Print)(P.25, P.61)

    Viewfinder (P.9)

    Diopter Adjustment Dial

    (P.9)z Button (Custom)(P.27)

    # Button (Flash)(P.23)

    Y Button(Self-timer) (P.28)

    & Button (Macro)(P.27)

    Card Access Lamp(P.9, P.67, P.73)

  • 8/8/2019 Olympus Cam Manual

    13/89

    EN 13

    (Shooting modeMonitor Symbols & Icons

    Item Indication Ref. Page

    1 Shooting mode P,c,B,F,U,A, etc. P.6, P.16,P.37

    2 Flash mode !,#,H,$, etc. P.23

    3 Silent mode j P.45

    4 Digital image stabilization h P.42

    5 Macro modeSuper macro mode

    &%

    P.27

    6 Shadow Adjustment Technology f P.25

    7 Noise reduction T P.44

    8 AE lock mark B P.23

    9 Battery check Z = full power, [ = low power P.76

    10 AF lock markManual focusAF predict

    ^a{

    P.23P.24P.42

    11 Flash standbyCamera movement warning/Flash

    charge

    # Lit# Blinks

    P.68

    12 Flash intensity control w -2.0 - +2.0 P.42

    13 Saturation 6 -5 - +5 P.44

    14 Sharpness N -5 - +5 P.44

    15 Contrast J -5 - +5 P.44

    16 Conversion lens 1 P.45

    17 Sound record R P.50

    18 Dual time l P.55

    19 Alarm k P.55

    20 Number of storable still picturesRemaining recording time

    400:34

    P.8P.72

    MovieStill picture

    10M10M+2.0+2.0 1/4001/400 F3.5F3.5

    +2.0+2.0+2+2+2+2+2+2

    44IN

    ISO1600ISO1600

    AFL

    NR A EL

    +2.0+2.0

    12s12sF IN EFIN E

    C

    1

    1011

    121314

    1516

    1718

    1920

    212425 2326

    3233

    31

    30

    29

    28

    27

    2 54 96 7 83

    22

    +2.0+2.0 IN 00:3400:34VG AVGA1515

    12s12s

    1

    17

    18

    20

    19

    22

    212326

    3331

    29

    28

    27

    2 54 93

  • 8/8/2019 Olympus Cam Manual

    14/89

    14 EN

    21 Current memory B: Pictures are recorded to the internalmemory

    No indication: Pictures are recorded to thecard

    P.85

    22 AF target mark R P.9,P.21,P.41

    23 Self-timer Y,W P.28

    24 Aperture value F2.8 to F8.0 P.17

    25 Shutter speed 15", 1/2, 1/400, 1/2000, BULB, etc. P.17

    26 Exposure compensation -2.0 - +2.0 P.22

    27 Image qualityCompression

    Frame rate

    P,QM (Normal),L (Fine)O (15 frames/sec.),N (30 frames/sec.)

    P.34P.34

    P.35

    28 Image size F,H,D,C, etc. P.34

    29 Spot metering n,J P.4130 ISO ISO 100, ISO 800, ISO 1600 etc. P.40

    31 White balance 5,3,1,w -y,V P.39

    32 Drive j,c,d,g,i, 7 P.24, P.40

    33 White balance compensation B1 - B7, R1 - R7 P.43

    Item Indication Ref. Page

  • 8/8/2019 Olympus Cam Manual

    15/89

    EN 15

    (Playback mode

    Item Indication Ref. Page

    1 Silent mode j P.452 Print reservation/Number of prints

  • 8/8/2019 Olympus Cam Manual

    16/89

    16 EN

    Button

    operations

    Button operations

    Set the mode dial to the desired shooting or playback mode. Some functions cannot be set depending on the position of the mode dial.

    g Functions available in shooting modes (P.79)

    The camera determines the optimum settings for the shooting conditions automatically.Settings in the [CAMERA MENU] such as WB and ISO sensitivity cannot be changed.

    The camera automatically sets the optimum aperture value and shutter speed for the brightness ofthe subject.Settings in the [CAMERA MENU] such as WB and ISO sensitivity can be changed.

    1 Power switch Turning the camera on and off

    Power on: Shooting mode Monitor turns on Lens extends

    Playback mode Monitor turns on

    2 Mode dial Switching between shooting and playback modes

    h Shooting pictures with full automatic settings

    P Set the optimum aperture value and shutter speed

    Playbackmode

    Shooting mode

    Shooting mode

    Flash mode

    Drive mode

    Macro mode/Super macro mode

    10M10M

    P

    44INORMNORM 1/4001/400 F3.5F3.512s12sSelf-timer

    c

    d

    e

    f g

    7 8

    12 5

    364

    9

    a

    b

    The number of

    remaining still pictures isdisplayed.

    h 0

    j

    i

    k

  • 8/8/2019 Olympus Cam Manual

    17/89

    EN 17

    Buttonoperations

    Turn the control dial. Press F to switch between the aperture value and the shutter speed.

    To take long exposure (bulb) shotsTurn the control dial toward G to set the shutter speed to BULB. The shutter remains open as long

    as the shutter button is pressed. (Bulb shooting is only possible when [ISO] is set to [64] (maximumtime: 8 minutes).)

    A Changing the aperture value for shooting picturesTurn the control dial. The camera automatically sets the shutterspeed.

    Aperture value

    : Turning toward U increases the aperture value.

    : Turning toward G decreases the aperture value.

    When the correct exposure cannot be obtained, the aperture valueis displayed in red.

    S Changing the shutter speed for shooting picturesTurn the control dial. The camera automatically sets the aperturevalue.

    Shutter speed: Turning toward U sets the shutter speed faster.

    : Turning toward G sets the shutter speed slower.

    When the correct exposure cannot be obtained, the shutter speedis displayed in red.

    M Changing the aperture value and shutter speed for shooting picturesExposure differentialWhen this range has been exceeded 3.0EV, the exposuredifferential is displayed in red.

    Aperture value

    : Turning toward U increases the aperture value.

    : Turning toward G decreases the aperture value.

    Shutter speed

    : Turning toward U sets the shutter speed faster.

    : Turning toward G sets the shutter speed slower.

    1/10001/1000 F4.0F4.0

    A

    10M10M44INORMNORM

    Adjustment rangeW : F2.8 to F8.0T : F4.5 to F8.0

    1/1001/100 F2.8F2.8

    S

    10M10M44INORMNORM

    Adjustment range1/2 to 1/1000(When [NOISE REDUCT.] is setto [ON]: up to 4 sec.)

    1/10001/1000 F2.8F2.82.0+2.0

    M

    10M10M44INORMNORM

    Adjustment range

    Aperture value: F2.8 to F8.0(The aperture value variesdepending on the zoom position.)Shutter speed: 15" to 1/2000 (Theshutter speed varies depending

    on the aperture value.)

  • 8/8/2019 Olympus Cam Manual

    18/89

    Button

    operations

    18 EN

    This mode allows you to set the shooting functions, save up to 4 shooting modes manually, and usethem as your original shooting modes.g MY MODE SETUP Setting and saving shooting-related functions (P.57)

    Use the function menu or control panel to switch the registered My Mode.g My 1/2/3/4 Switching the registered original shooting mode (P.28)

    Switching My Mode (P.31)

    You can shoot pictures by selecting a scene mode according to the situation.

    Select a scene mode/Change to another scene mode Press m and select [SCN] from the top menu. By switching to another scene mode, most settings will be changed to the default settings of the

    new scene mode.g s (Scene) Shooting pictures by selecting a scene according to the situation (P.37)

    Shooting pictures by comparing previews of different effects

    When [R] (movies) is set to [ON], audio is recorded with the movie. When recording with sound, only the digital zoom can be used. To use the optical zoom, set [R]

    (movies) to [OFF]. To zoom in when recording with sound, set [DIGITAL ZOOM] to [ON].g R (movies) Recording sound with movies (P.45)

    DIGITAL ZOOM Zooming in on your subject (P.41)

    r Shooting pictures with your own original modes

    s Shoot pictures by selecting a scene mode according to the situation

    g Follow the shooting guide to take better picturesThis function allows you to set the target items by following theshooting guide displayed on the screen. Press m to display the shooting guide again. To change the setting without using the shooting guide, select

    another shooting mode. Functions set using the shooting guide will revert to the default

    settings when m is pressed or when the shooting mode ischanged.

    Select one of the [1 Shoot w/ effects preview.] options from the

    [SHOOTING GUIDE] menu to preview a live, multi-frame windowon the monitor showing different levels of the selected shootingeffect. You can use the four preview frames to compare the desiredsettings/effects. Use the arrow pad to select the frame with the desired settings,

    and press o. The camera automatically switches to shootingmode and allows you to shoot with the selected effect.

    n Recording movies

    1

    2

    3

    4

    5

    OKSET

    SHOOTING GUIDE

    Shoot w/ effects preview.

    Brightening subject.

    Shooting into backlight.

    Set particular lighting.

    Blurring background.

    Use 4 3 to change the display.

    When [Exposure effects.] isselected

    0.00.0 +0.3+0.3

    +0.7+0.7 +1.0+1.0

    Exposure effects.

  • 8/8/2019 Olympus Cam Manual

    19/89

    EN 19

    Buttonoperations

    When [IMAGE STABILIZER] is set to [ON], continuous movie recording for a long period willcause the cameras internal temperature to rise and the camera may stop operationautomatically. Remove the battery and allow the camera to cool down for some time before youbegin shooting again. Or you can set [IMAGE STABILIZER] to [OFF].In addition, the temperature of the cameras exterior also rises during usage. This is not amalfunction.

    The last picture taken is displayed. Press the arrow pad to view other pictures.

    Use the control dial to switch between close-up playback, index display and calendar display.g Control dial Index display/Calendar display/Close-up playback (P.22)

    Playing back moviesSelect a movie in the playback mode and press o to play.

    Operations during movie playback

    Press o to pause the playback.

    This icon lights red during movie recording.

    The remaining recording time is displayed.When the remaining recording time reaches 0, recording will stopautomatically.

    q Viewing pictures you have taken/Selecting playback mode

    00:3400:34

    RECREC

    2008.08.262008.08.26 12:3012:30100-0004100-0004

    44INMOVIE PLAY OK

    2008.08.262008.08.26 12:3012:30100-0004100-0004

    00:12 /00:3400:12 /00:34IN1 : Increases the volume.2 : Reduces the volume.

    3 : Each time you press the button, the playback speed changes in the followingorder: 2; 20; and back to 1.

    4 : Plays the movie in reverse. Each time you press the button, the playback speedchanges in the following order: 1; 2; 20; and back to 1.

    Playing time/Total recording time

  • 8/8/2019 Olympus Cam Manual

    20/89

    Button

    operations

    20 EN

    Operations during pause

    To resume the movie, press o. To cancel the playback of the movie in the middle of it or during pause, press m.

    Viewing panoramic pictures taken with [COMBINE IN CAMERA 1] [COMBINE INCAMERA 2] (Panorama playback)

    Use the arrow pad to select a panoramic picture, and then presso. Scrolling from left to right or from bottom to top starts

    automatically. Turn the control dial to zoom in or out while a picture is scrolling.

    Use the arrow pad to change the scrolling direction of a zoomedin picture.

    To stop or resume scrolling in the original magnification, presso.

    To exit panorama playback, press m.g PANORAMA Taking and combining panoramic pictures

    (P.36)

    Displaying pictures that have been shot continuously in index view (SequentialPlayback) / Auto playing back of pictures that have been shot continuously

    (Sequential Pictures Auto Playback)Only the first frame will be displayed for pictures that have been shot continuously using thefollowing options.

    [j] [c] [d] [i] [BKT] [TIMELAPSE] [AUCTION] [SHOOT & SELECT1] [SHOOT &SELECT2] [SMILE SHOT]

    Select the pictures withs icon and press AELAFL/m to play back in index view (SequentialPlayback). Press AELAFL/m again to return to the first frame.

    Select the pictures withs icon and press o to play back automatically (Sequential PicturesAuto Playback).

    This function is only available for pictures taken with this model. When the first frame is displayed, changes to any of the following functions will be applied to all

    the sequential pictures in the series:0/y/PRINT ORDER/ERASE

    To configure settings to individual pictures, press AELAFL/m to display the pictures in indexview first before configuring.

    2008.08.262008.08.26 12:3012:30100-0004100-0004

    00:14 /00:3400:14 /00:34IN/

    1 : Displays the first frame.2 : Displays the last frame.

    3 : Displays the next frame.4 : Displays the previous frame.

    22INEXPAND100-0002100-0002

    10M10M

    22INBACK

    AELAFL/m

  • 8/8/2019 Olympus Cam Manual

    21/89

    EN 21

    Buttonoperations

    Shooting still picturesSet the mode dial toh, P, A, S, M,r, g ors, and lightly press the shutter button(halfway). The AF target mark lights in green when the focus and exposure are locked (focus lock).The shutter speed and aperture value are displayed (only when the mode dial is set toh, P, A,S orM). Now press the shutter button all the way (completely) to shoot a picture.

    Recording moviesSet the mode dial ton, and press the shutter button halfway to lock the focus, and then press theshutter button completely to start recording. Press the shutter button again to stop recording.

    Turn the zoom ring to zoom in on your subject when shooting.Optical zoom ratio: 20

    Note When the camera is mounted on a tripod, if the tripod pad is too big, it may obstruct rotation

    of the zoom ring.

    3 Shutter button Shooting pictures

    Locking the focus and then composing the shot(Focus lock)Compose your picture with the focus locked, and then fully pressthe shutter button to shoot a picture. If the AF target mark blinks in red, the focus is not adjusted

    properly. Try locking the focus again.

    4 Zoom ring Zooming while shooting

    1/4001/400 F3.5F3.5

    P

    AF target mark

    Zoom outZoom in

    WW TT0M10M

    P

    44INORMNORM 1/4001/400 F3.5F3.5WW TT0M10M

    P

    44INORMNORM 1/4001/400 F3.5F3.5

  • 8/8/2019 Olympus Cam Manual

    22/89

    Button

    operations

    22 EN

    Turn the control dial toward G orU to change the picture display in playback mode.

    Toggles between the monitor and viewfinder.

    5 Control dial Index display/Calendar display/Close-up playback

    6 F button Changing picture brightness (Exposure Compensation)Press F in shooting mode and turn the control dial to adjust thebrightness. Press F again to confirm your selection. Adjustable from - 2.0EV to +2.0 EV

    : Turn the control dial toward U to make the picturebrighter.

    : Turn the control dial toward G to make the picturedarker.

    7 u button Monitor/Viewfinder

    Close-up playback Turn the control dial toward U to

    incrementally enlarge the pictureup to 10 times the original size.Turn the control dial toward G toreduce the size.

    Use the arrow pad during close-up playback to scroll around the

    picture. Press o to return to the single-

    frame playback.

    Index display Use the arrow pad to select a

    picture for playback, and presso to play back the single-frame of the picture selected.

    Calendar display Use the arrow pad to select the date,

    and press o or turn the control dialtoward U to display the pictures onthe date selected.

    Single-frame playback Use the arrow pad to browse pictures.

    0808 2727 2828 2929 3030 3131 11 22SUNSUN MONMON TUETUE WEDWED THUTHU FRIFRI SATSAT20082008

    33 44 55 66 77 88 991010 1111 1212 1313 1414 1515 16161717 1818 1919 2020 2121 2222 23232424 2525 2626 2727 2828 2929 30303131 11 22 33 44 IN

    2008.08.262008.08.26 44IN2:3012:30

    44IN10M10M

    2008.08.262008.08.26 12:3012:30100-0004100-0004NORMNORM

    2008.08.262008.08.26 12:3012:30

    1010x

    44IN

    2008.08.262008.08.26 12:3012:30 44IN

    2008.08.262008.08.26 12:3012:30 44IN

    GUG

    GU

    G

    GU

    GU

    U

    1/10001/1000 F8.0F8.02.0+2.0

    P

    10M10M44INORMNORM

  • 8/8/2019 Olympus Cam Manual

    23/89

    EN 23

    Buttonoperations

    Assign [AE LOCK], [AF LOCK] or [AF LOCK + AE LOCK] to AELAFL so that the functionconcerned is enabled by pressing AELAFL in shooting mode.

    g AEL/AFL BUTTON Registering the AE lock and AF lock functions (P.57)

    Only the first frame is displayed for pictures that have been shot continuously.Pressm in the playback mode to display continuously shot pictures in index view.g Displaying pictures that have been shot continuously in index view (Sequential Playback) /

    Auto playing back of pictures that have been shot continuously (Sequential Pictures AutoPlayback) (P.20)

    Opens the flash.Press#UP to take a picture with flash.

    Press#UP in shooting mode to open the flash. Then press 3# to select the flash setting.Press o to confirm your selection.

    8 AELAFL/m buttonLocking the focus position and exposure/Playing back continuously shot pictures in index display

    AELAFL Locking the focus position and exposure

    Locking the focus position and exposure (AF lock +AE lock)

    Assign [AF LOCK + AE LOCK] to AELAFL. The meteringvalue is saved by pressing AELAFL and the focus andexposure are locked.^ (AF lock mark) and B (AE lockmark) are displayed on the monitor. Press AELAFL again tocancel the AF lock + AE lock. Each time you press the button,the focus and exposure are locked and canceled alternately.

    m Playing back continuously shot pictures in index display

    9 #UP button Flash pop-up

    0 3# button Flash shootingAUTO Auto-flash The flash fires automatically in low light or backlight

    conditions.

    ! Red-eye reductionflash

    This emits pre-flashes to reduce the occurrence of red-eye inyour pictures.

    # Fill-in flash The flash fires regardless of the available light.H Red-eye fill-in flash The flash always fires after pre-flashes for red-eye reduction

    are emitted.

    $ Flash off The flash does not fire.

    #SLOW Slowsynchronization

    The flash fires with slow shutter speed. The flash fires rightafter the shutter fully opens (1st curtain). As the flash fireswith slow shutter speed, you can capture both thebackground, such as a night view, and the subject.

    !SLOW Slowsynchronization/

    Red-eye reductionflash

    While using slow synchronization (1st curtain) with flashshooting, you can also use this function to achieve red-eye

    reduction. Use this mode to take pictures of a person againsta night view.

    1/4001/400 F3.5F3.5

    PAFL

    AEL

    AF lock mark

    AE lock mark

  • 8/8/2019 Olympus Cam Manual

    24/89

    Button

    operations

    24 EN

    Flash options are disabled if the pop-up flash is closed.

    Press j in shooting mode to select the drive mode.Press o to confirm your selection.

    You can take a sequence of pictures at one time by holding down the shutter button. The camerawill take pictures continuously until you release the shutter button.

    The exposure differential and number of frames for bracket shooting can be set in [DRIVE] in the[CAMERA MENU].g DRIVE Continuous shooting (P.40)

    Slide the AF/MF switch in shooting mode to set the focus mode.

    #SLOW2 Slowsynchronization 2

    The flash fires just before the shutter closes (2nd curtain).You can use this setting to create interesting effects in yourpicture, such as expressing the movement of a car byshowing the tail-lights streaming backwards. The slower theshutter speed, the more pronounced the effects.

    a j button Single-frame shooting/Sequential shootingo Single-frame shooting Shoots 1 frame at a time when the shutter button is pressed.

    j Sequential shooting Focus and exposure are locked at the first frame. Thesequential shooting speed varies depending on the imagequality setting.

    c High speed sequentialshooting 1

    Pictures can be taken at a faster speed than normal sequentialshooting.

    d High speed sequential

    shooting 2

    Sequential shooting at a speed of approximately 13.5 frames/

    sec.g Pre-capture Sequential shooting at a speed of approximately 13.5 frames/

    sec. Pressing the shutter button halfway stores 10 frames of apicture immediately before shooting.

    i AF sequential shooting Adjusts the focus 1 frame at a time. The shooting speed isslower than for normal sequential shooting.

    7 Bracket shooting Takes pictures sequentially while changing the exposure foreach frame. Focus and white balance are locked at the firstframe.

    b AF/MF switch Changing the focus method

    AF Press the shutter button halfway. The camera automaticallyfocuses.

    MF Adjust the focus manually.

    When set to [MF] Press 4 3 to set the focus. During operation, the center of the

    frame is enlarged. Hold down o to fix the focus. The focus is locked at the

    distance you have set, and MF is displayed in red on themonitor. To adjust the focus, hold down o again.

    The distance displayed on the monitor is a reference figure. You can use the zoom ring or the control dial as well as 4 3 to

    adjust the focus.g MANUAL FOCUS Selecting the focusing method in manual

    focus mode (P.58)

    1m1m 3m3m 5m5m

    10M10M

    P

    1/4001/400 F3.5F3.5 44

    MF

    ININ EFIN E

  • 8/8/2019 Olympus Cam Manual

    25/89

    EN 25

    Buttonoperations

    Pictures you have taken are displayed on the monitor. Pressq in shooting mode.Pressq again or press the shutter button halfway to return to shooting mode.

    When a printer is connected to the camera, display the picture you want to print in playback modeand press P.g EASY PRINT (P.59)

    Pressf in shooting mode to turn on or off Shadow Adjustment Technology. Press o to confirm

    your selection. A frame is displayed on the monitor around your subjects face (except forn). Thisfunction makes the subjects face appear brighter, even against strong backlighting.

    It may take a few seconds until the frame is displayed on the monitor. The faces may not be detected depending on the subject. When [ON] is selected, the following setting restrictions apply:

    [METERING] is fixed at [ESP]. [AF MODE] is fixed at [FACE DETECT]. When [DRIVE] is set to any mode other than [o], this function is only applied to the first

    frame.

    [i] automatically becomes [j].

    In playback mode, select the picture you want to erase and pressS. Once erased, pictures cannot be restored. Check each picture before erasing to avoid

    accidentally erasing pictures you want to keep.g 0Protecting pictures (P.50)

    Displays the top menu.

    c q/P button Viewing pictures/Printing picturesq Viewing pictures

    P Printing picturesd f/S button Brightening the subject against backlight/Erasing picturesf Brightening the subject against backlight (Shadow Adjustment

    Technology)

    OFF Shadow Adjustment Technology is deactivated.

    ON Shadow Adjustment Technology is activated.

    S Erasing pictures

    e m button (MENU)

  • 8/8/2019 Olympus Cam Manual

    26/89

    Button

    operations

    26 EN

    Press DISP. to change the display in the following order.

    *1 This is not displayed when the mode dial is set ton org.*2 This is not displayed when the mode is set to [OFF] in the menu.g uDisplaying the histogram (P.57)

    FRAME ASSIST Displaying the frame assist/Determining the type of frame assist (P.56)

    f DISP./E buttonChanging the information on display/Displaying the menu guide/Checking the time

    DISP. Changing the information on display

    Frame assist(Horizontal andvertical lines ordiagonal lines)*1*2

    Simple display*1

    Normal display

    Histogramdisplay*1*2

    Shooting mode

    Histogramdisplay*1

    Normal display

    Detailed

    display

    Playback mode

    No informationdisplay

    2008.08.262008.08.26 12:3012:30 44100-0004100-0004

    IN

    10M10MNORMNORM

    10M10M

    2008.08.262008.08.26 12:3012:30 44100-0004100-0004

    +2.0+2.0F3.5F3.5/10001/1000

    IN

    ISO 40 0ISO 400NORMNORM

    10M10M+2.0+2.0

    P

    44INORMNORM

    ISO1600ISO1600

    12s12s1/4001/400 F3.5F3.5

    10M10M+2.0+2.0

    P

    44IN

    ISO1600ISO1600

    NORMNORM12s12s

    1/4001/400 F3.5F3.5

    12s12s

    10M10M+2.0+2.0

    P

    44INORMNORM

    ISO1600ISO1600

    1/4001/400 F3.5F3.5

    12s12s

    10M10M

    2008.08.262008.08.26 12:3012:30

    +2.0+2.0F3.5F3.5

    44IN

    NORMNORM

    1/10001/1000

    ISO 40 0ISO 400

  • 8/8/2019 Olympus Cam Manual

    27/89

    EN 27

    Buttonoperations

    While the camera is off, press DISP./E to display the set alarm time (when [ALARM CLOCK] isset) and the current time for 3 seconds.

    Use the arrow pad to select scenes, playback picture, and the items on the menus.

    Press 4& in shooting mode to select the macro mode.Press o to confirm your selection.

    This allows you to register a frequently used function (excepth,n and g) to 1 z.Once registered, you can set the settings directly with the button instead of displaying the screen

    from the menu. The default setting is [OFF].

    (Example) When [FINE ZOOM] is registered in [CUSTOM BUTTON]

    Press 1 zn

    g CUSTOM BUTTON Assigning functions to the custom button (P.58)Functions that can be assigned to My Mode/custom button (P.78)

    E Displaying the menu guideWith a menu item highlighted, press and hold downE to display themenu guide.

    Checking the time

    g Arrow pad (1243)h 4& button Shooting pictures close to the subject (Macro mode)

    OFF Macro mode off Macro mode is deactivated.

    & Macro mode This mode lets you shoot as close as 10 cm/3.9 in. (wide)from your subject.

    % Super macro mode This mode lets you shoot as close as 1 cm/0.4 in. fromyour subject.

    i 1z button Using this button as custom button

    METERING

    Sets picture brightness

    for taking pictures.

    OFF ONON

    OKETSET OK

    P

    FINE ZOOMFINE ZOOM

    A setting screen is displayed.

  • 8/8/2019 Olympus Cam Manual

    28/89

    Button

    operations

    28 EN

    Press 2Y in shooting mode to select on or off for the self-timer.Press o to confirm your selection.

    To cancel the self-timer, press 2Y. Self-timer shooting is automatically canceled after one shot. The self-timer cannot be used when [AF PREDICT] is [ON] or [PRE-CAPTURE] is [ON].

    Press o in shooting mode to display the control panel or function menu. You can use the controlpanel to view the current settings and set the shooting mode functions. You can use the functionmenu to set frequently used functions in shooting mode.This button is also used to confirm your selection. You can select whether to display the control panel or the function menu.g CONTROL PANEL Switching between the control panel and function menu (P.53)

    g Operations using the control panel (P.29)

    Displayed when the mode dial is set tor. Settings are registered ons as a factory default.

    Other functions you can set with the function menug WB Adjusting the color of a picture (P.39)

    ISO Changing the ISO sensitivity (P.40)

    METERING Changing the area for measuring the brightness of a subject (P.41)IMAGE QUALITY Changing the image quality (P.34)

    j 2Y button Self-timer shootingOFF Cancel the self-timer.

    12s After pressing the shutter button completely, the self-timer lamp lights for approximately 10 seconds, blinks for

    approximately 2 seconds, and then the picture is taken.2s After pressing the shutter button completely, the self-timer

    lamp blinks for approximately 2 seconds, and then the pictureis taken.

    k o button (OK/FUNC) Setting using the control panel or function menu

    Setting using the control panel

    Setting using the function menu

    My 1/2/3/4 .................................................... Switching the registered original shooting mode

    s/E/c/d

    Function menu

    4 3 : Select a setting and press o.

    12 : Select the function to be set.

    c

    10M10M MY MODE 2MY MODE 2

    33ISO1600ISO1600

    F IN EFIN E

  • 8/8/2019 Olympus Cam Manual

    29/89

    EN 29

    Operation

    susingthecontrolpane

    l

    Operations using the control panel

    Pressing o in shooting mode displays a screen for settingand displaying shooting functions. This is called the controlpanel.

    u button

    o button

    Viewfinder Monitor Viewfinder Monitor

    10M10M

    P

    44INORMNORM 1/4001/400 F3.5F3.5

    ISO1600ISO160010M

    1/400 F3.5

    +0

    +0

    +0

    44

    ISO1600

    +0.0

    P

    WBWBK0M10M

    P

    44INORMNORM 1/4001/400 F3.5F3.5

    ISO1600ISO1600o button

    10M

    1/400 F3.5

    +0

    +0+0

    44

    ISO

    1600

    +0.0

    P

    2008.08.262008.08.26

    u buttonControl panel

    Whenu is pressed to turn the viewfinder on,the control panel is displayed on the monitor.

    10M10M

    P

    44INORMNORM 1/4001/400 F3.5F3.5

    ISO1600ISO1600

  • 8/8/2019 Olympus Cam Manual

    30/89

    Operationsusingtheco

    ntrolpanel

    30 EN

    1 Displays the function settings status. When 4&, 1 z, 2Y orf is pressed, the corresponding icon is selected and you can

    set the function.

    g Setting using the buttons (P.31)2 The battery check and flash charging marks are displayed.3 The name of the function selected in area 4 is displayed. The name of the function is also

    displayed during custom button operations. When no function has been selected, the date isdisplayed.

    4 You can set the following functions. Use the arrow pad to select a function and use the control dial to change the settings.g Using the control panel (P.31)

    5 The shutter speed, aperture value, exposure compensation value, exposure compensationindicator and flash intensity control indicator are displayed.

    6 The number of storable still pictures/remaining recording time is displayed.

    Control panel indications

    Function Ref. Page Function Ref. Page

    WB P.39 IMAGE QUALITY P.34

    FLASH MODE P.23 IMAGE SIZE P.34w P.42 COMPRESSION P.34

    ISO P.40 PICTURE MODE P.43

    DRIVE P.40 SHARPNESS P.44

    AF MODE P.41 CONTRAST P.44

    AREA P.42 SATURATION P.44

    METERING P.41

    12

    3

    4

    10M

    +2.0 1/1000

    0

    F8.0

    +2

    +2

    +2

    44

    ISO1600

    NR

    +2.0

    FIN E

    P

    WBWB

    RC2s2s

    3

    5 6

  • 8/8/2019 Olympus Cam Manual

    31/89

    EN 31

    Operation

    susingthecontrolpane

    l

    Using the control panel

    (Example) To set [w]1 Press o to display the control panel on the monitor. The

    cursor lights in the function area.2 Use the arrow pad to select [w] and then use the control dial

    to change the settings.

    Items which cannot be selected are displayed in gray. Items which cannot be set are indicated by [].

    Setting using the buttons

    When 4&, 1 z, 2Y orf is pressed, the correspondingicon on the control panel is selected. While its icon is selected,you can use the control dial to set the functions value.

    Switching My Mode

    You can use this function when the mode dial is set tor. Usethe arrow pad to selectr and use the control dial to switch MyMode.g MY MODE SETUP Setting and saving shooting-related

    functions (P.57)

    10M

    +2.0 1/400 F3.5

    +0

    +0+0

    44

    ISO

    1600

    +2.0

    P

    wwK

    FIN E

    The flash intensity value and flashintensity control indicator are

    displayed.

    10M

    1/400 F3.5

    +0

    +0

    +0

    44

    ISO1600

    +0.0

    P

    2008.08.262008.08.26K

    When 4& is pressed

    10M

    1/400 F3.5

    +0

    +0

    +0

    44

    ISO1600

    +0.0

    FIN E

    r1/2/3/4r1/2/3/4c

    K

    Select this icon.

  • 8/8/2019 Olympus Cam Manual

    32/89

    32 EN

    Menuoperation

    s

    Menu operations

    Pressing m displays the top menu on the monitor or viewfinder.

    The items displayed on the top menu differ according to the mode.

    When [CAMERA MENU], [PLAYBACK MENU], [EDIT], [ERASE] or [SETUP] is selected, themenu corresponding to the respective functions is displayed.

    When your camera is set according to the shooting guide with the mode dial set at g,press m to display the shooting guide screen.

    During menu operations, the buttons and their respective functions are displayed at the bottom ofthe monitor. Follow these guides to navigate the menus.

    About the menus

    Operation guide

    BACKa : Returns to the previous menu.EXITa : Exits the menu.

    SETf : Sets the selected item.

    Mode dial

    m button

    Arrow pad

    o button

    Top menu (When Mode Dial is set to P)

    S C NS C N

    RESETRESET

    PANORAMAPANORAMA

    CAMERAMENUCAMERAMENUSILENTMODESILENTMODE

    MENUEXIT SET OK

    IMAGEQUALITYIMAGEQUALITY

    SETUPSETUPISO

    OFF

    OFF

    1

    2

    3

    4

    5

    CAMERA MENU

    SET OK

    AUTO

    o

    FINE ZOOM

    DIGITAL ZOOM

    DRIVE

    AUTOWB

    MENUEXIT

    Operation guide

    m button o

    S C NS CN

    RESETRESET

    PANORAMAPANORAMA

    CAMERAMENUCAMERAMENUSILENTMODESILENTMODE

    MENUEXIT SET OK

    IMAGEQUALITYIMAGEQUALITY

    SETUPSETUP

  • 8/8/2019 Olympus Cam Manual

    33/89

    EN 33

    Menuoperations

    This explains how to use the menus with [DIGITAL ZOOM] as an example.

    1 Set the mode dial to P.2 Pressm to display the top menu.

    Select [CAMERA MENU] and presso. [DIGITAL ZOOM] is on a menu in [CAMERA MENU]. Press

    o.

    3 Press12 to select [DIGITAL ZOOM], andpresso. Unavailable settings cannot be selected. When pressing 4 on this screen, the cursor moves to the

    page display. Pressing 12 changes the page. To return

    to item selection, press 3 oro.

    4 Press12 to select [OFF] or [ON], andpresso. The menu item is set and the previous menu is displayed.

    Press m repeatedly to exit the menu. To cancel changes and continue menu operation, press

    m before pressing o.

    Using the menus

    S C NS CN

    RESETRESET

    PANORAMAPANORAMA

    CAMERAMENUCAMERAMENUSILENTMODESILENTMODE

    MENUEXIT SET OK

    IMAGEQUALITYIMAGEQUALITY

    SETUPSETUP

    ISO

    OFF

    OFF

    1

    2

    3

    4

    5

    CAMERA MENU

    SET OK

    AUTO

    o

    FINE ZOOM

    DIGITAL ZOOM

    DRIVE

    AUTOWB

    MENUEXIT

    The selected item is displayedin a different color.

    Page display:The page display mark is displayed when there

    are additional menu items on the next page.

    1

    2

    3

    4

    5

    ISO

    OFF

    OFF

    CAMERA MENU

    AUTO

    o

    FINE ZOOM

    DIGITAL ZOOM

    DRIVE

    AUTOWB

    MENUEXIT SET OK

    1

    2

    3

    4

    5

    ISO

    OFF

    OFF

    CAMERA MENU

    AUTO

    o

    FINE ZOOM

    DIGITAL ZOOM

    DRIVE

    AUTOWB

    MENU SET OKBACK

    DIGITAL ZOOM

    OFF

    ON

  • 8/8/2019 Olympus Cam Manual

    34/89

    34 EN

    Menuoperation

    s

    Some menu items are not available depending on the position of the mode dial.g Functions available in shooting modes (P.79)

    g SETUP menus (P.52) The factory default settings are displayed in gray ( ).

    This function allows you to set [IMAGE QUALITY] (still pictures only) and [IMAGE SIZE] and[COMPRESSION] ([FRAME RATE] when recording movies). When [RAW] is selected in [IMAGE QUALITY], you cannot set [IMAGE SIZE] or

    [COMPRESSION].

    Still picture image quality and their applications

    * Cannot be selected when set toh ors.

    Shooting mode menu hPASMrsn5CAMERA MENU

    WBISODRIVEFINE ZOOM

    DIGITAL ZOOMMETERINGAF MODEFULLTIME AFAF PREDICTAF ILLUMINAT.

    IMAGE STABILIZERw

    QFLASHR (still pictures)>PICTURE MODE

    SHARPNESSCONTRASTSATURATIONNOISE REDUCT.TIMELAPSE1 (conversion lens)R (movies)

    * An OLYMPUS xD-Picture Card is required.

    1 IMAGE QUALITY Changing the image quality

    IMAGE QUALITY

    JPEG Compressed still picture data in JPEG format. [IMAGE SIZE] and[COMPRESSION] can be set.

    RAW* 3648 2736 Raw uncompressed data. Data is in ORF format.

    RAW + JPEG* Images are simultaneously recorded in JPEG and RAW formats at thetime of shooting.

    IMAGE SIZE Application

    F 3648 2736 Suitable for printing pictures over A3 (11 17 in.).

    H 2560 1920 Suitable for printing pictures at A4 (8.5 11 in.).I 2048 1536 Suitable for printing pictures up to A4 (8.5 11 in.).

    J 1600 1200 Suitable for printing pictures at A5 (5 7 in.).

    K 1280 960 Suitable for printing pictures at postcard size.

    C 0640 480 Suitable for viewing pictures on a TV or using pictures on emails andweb sites.

    D 1920 1080 Suitable for playing pictures on wide screen TV.

    COMPRESSION

    LFINE Shooting at high quality.

    M NORMAL Shooting at normal quality.

    S C NS CN

    RESETRESET

    PANORAMAPANORAMA

    CAMERAMENUCAMERAMENUSILENTMODESILENTMODE

    MENUEXIT SET OK

    IMAGEQUALITYIMAGEQUALITY

    SETUPSETUP

    1

    2

    3*

    4

    5

    6

  • 8/8/2019 Olympus Cam Manual

    35/89

    EN 35

    Menuoperations

    Movie image quality

    g Number of storable still pictures and recording length of movies (P.72)

    This function restores some shooting functions back to default settings.

    Functions restored to the factory default settings

    IMAGE SIZE FRAME RATE

    C 640 480 N 30 frames/sec.

    E 320 240 O 15 frames/sec.

    2 RESET Change the shooting functions back to default settings

    NO / YES

    FunctionFactory default

    settingRef.Page

    FunctionFactory default

    settingRef.Page

    Flash AUTO P.23 FULLTIME AF OFF P.42

    & OFF P.27 AF PREDICT OFF P.42

    Y OFF P.28 AF ILLUMINAT. ON P.42Shadow AdjustmentTechnology

    OFF P.25 IMAGE STABILIZER ON P.42

    w 0.0 P.42

    F 0.0 P.22 QFLASH INT/EXT P.43

    IMAGE QUALITY JPEG P.34 R (still pictures) OFF P.43

    IMAGE SIZE(still pictures/movies)

    F/E P.34 > 0 P.43

    PICTURE MODE NATURAL P.43

    COMPRESSION M P.34 SHARPNESS 0 P.44

    FRAME RATE O P.35 CONTRAST 0 P.44

    WB AUTO P.39 SATURATION 0 P.44

    ISO AUTO P.40 NOISE REDUCT. ON P.44

    DRIVE o P.40 TIMELAPSE OFF P.45

    FINE ZOOM OFF P.41 1 (conversion lens) OFF P.45

    DIGITAL ZOOM OFF P.41 R (movies) OFF P.45

    METERING ESP P.41 Monitor/Viewfinder (u) Monitor P.22

    AF MODE iESP P.41 s PORTRAIT P.37

  • 8/8/2019 Olympus Cam Manual

    36/89

    36 EN

    Menuoperation

    s

    An Olympus xD-Picture Card is required for shooting. When the card capacity is insufficient, this function cannot be selected.

    [COMBINE IN CAMERA 1]As you recompose the frame, the camera automatically shoots and combines pictures for a singlepanoramic picture in the camera. Only combined pictures are saved.

    Take the first picture. When you slightly move the camera in the direction of the next picture, a target mark and a

    pointer appear. The pointer moves as you pan the camera. Move the camera slowly and steadily until the pointer

    overlaps the target mark, then stay still. The camera shoots the second picture automatically. After the current subject appears on the monitor, take the third picture in the same manner as

    the second one. After the third picture is taken, the pictures are automatically combined, and then the combinedpicture is displayed. To combine only two pictures, press o before shooting the third picture.

    To cancel making the panoramic picture during shooting, press m.

    [COMBINE IN CAMERA 2]Pictures are manually shot, and the camera automatically combines pictures for a single panoramicpicture in the camera. Only combined pictures are saved.

    Use the arrow pad to specify at which edge you want to connect the pictures, and then take thefirst picture.

    Compose your second shot so that the edge of the first picture overlaps the edge of the secondpicture, then shoot.

    Take the third picture in the same manner as the second one. After the third picture is taken, the pictures are automatically combined, and then the combined

    picture is displayed. To combine only two pictures, press o before shooting the third picture. To cancel making the panoramic picture during shooting, press m.

    3 PANORAMA Taking and combining panoramic pictures

    COMBINE IN CAMERA1 As you recompose the frame, the camera automaticallyshoots and combines pictures in the camera.

    COMBINE IN CAMERA2 Pictures are manually shot, and the camera automaticallycombines pictures in the camera.

    COMBINE IN PC Pictures are manually shot to be combined on a computer.

    SAVE OKMENUCANCELMENUCANCEL SAVE OKMENUCANCEL SAVE OKMENUCANCEL

    2nd 3rd

    Target mark

    PointerConnects picturesfrom left to right

    1st

    Connects picturesfrom left to right

    SAVE OKMENUCANCELMENUCANCEL SAVE OKMENUCANCEL

    1st 2nd 3rd

  • 8/8/2019 Olympus Cam Manual

    37/89

    EN 37

    Menuoperations

    [COMBINE IN PC]Create a panoramic picture using the OLYMPUS Master software from the provided CD-ROM.

    Use the arrow pad to specify at which edge you want to connect the pictures, and then composeyour shots so that the edges of the pictures overlap.Shooting is possible for up to 10 pictures. Press o to exit panorama shooting. In [COMBINE IN PC] the previous picture for positioning does not remain. Remember the frame

    displayed on the monitor as a rough indication, then compose the shot so that the edges of theprevious picture in the frame overlap with the next shot.

    Note Focus, exposure, WB and zoom are locked in the first frame, and the flash does not fire.

    In [COMBINE IN CAMERA1] or [COMBINE IN CAMERA2] mode, image quality is locked. Optical zoom magnification is restricted to 10. In [COMBINE IN CAMERA1] mode, camera settings are automatically optimized for this

    mode. In [COMBINE IN CAMERA2] or [COMBINE IN PC] mode, pictures are taken in thelast [ISO] or [SCN] settings set (except for some scene modes).

    In panorama mode, Shadow Adjustment Technology is not available. Pictures taken in panorama mode cannot be edited, except for [LIGHTING FIX] in

    [PERFECT FIX].

    The scene mode selection screen displays sample images aswell as a description of the shooting situation for which theselected scene is designed. It can be set only when the mode dialis set to s.g Mode dial Switching between shooting and playback modes

    (P.16) By switching to another scene mode, most settings will be

    changed to the default settings of the new scene mode.The zoom position may change automatically depending onthe scene.

    *1 When the subject is dark, noise reduction is automaticallyactivated. This approximately doubles the shooting time, duringwhich the next picture cannot be taken.

    *2 The focus is locked at the first frame.*3 During sequential shooting, the camera focuses for each frame.

    4 s (Scene) Shooting pictures by selecting a scene according to the situationPORTRAIT /LANDSCAPE/LANDSCAPE+PORTRAIT/SPORT/NIGHT SCENE*1/NIGHT+PORTRAIT*1/INDOOR/CANDLE/SELF PORTRAIT/

    AVAILABLE LIGHT/SUNSET/FIREWORKS*1/MULTI FIREWORKS/CUISINE/

    BEHIND GLASS/DOCUMENTS/AUCTION*2/SHOOT & SELECT1*2/

    SHOOT & SELECT2*3/SMILE SHOT/BEACH/SNOW/QUICK SHUTTER

    Connects pictures from left to right Connects pictures from bottom to top

    3: The next picture isconnected at the rightedge.

    4: The next picture is

    connected at the leftedge.

    1 : The next picture isconnected at the top.

    2: The next picture isconnected at the

    bottom.

    Scene mode selection screen

    Set the scene mode.

    PORTRAIT

    SET OKMENUEXIT

  • 8/8/2019 Olympus Cam Manual

    38/89

    38 EN

    Menuoperation

    s

    [bMULTI FIREWORKS] This function allows you to take multiple exposures of two images on a single frame. Take the first image. The first image is saved and then displayed in the background. Compose

    the shot and take the second image. The second image is saved and the two images arecombined and saved as a separate file. The combined picture is displayed during saving, andthen the camera is again ready to take a second image. You can continue to take multipleexposure pictures.

    The exposure is locked at the first image.

    [eSHOOT & SELECT1] [fSHOOT & SELECT2] Press and hold the shutter button to shoot sequential pictures. After shooting pictures, select the

    ones you want to erase by marking them withR and pressf/S to erase them.

    [lSMILE SHOT] When the camera detects a smiling face in shooting standby mode, 3 frames are automatically

    taken in high speed sequential shooting mode. You can also shoot a picture by pressing theshutter button.

    A smiling face may not be detected for some subjects. When [SMILE SHOT] is selected, the self-timer lamp lights. Shooting is not available while the

    self-timer lamp is blinking.

    [rQUICK SHUTTER] The shutter release time lag is shorter than normal. This enables you not to miss a single photo

    opportunity. [FULLTIME AF] is automatically set to [ON].g FULLTIME AF Shooting pictures while keeping the subject in focus (P.42) [c] and [d] in [DRIVE] can be set.

    10M10M44INORMNORM

    10M10M33INORM OKEXIT

    When taking the first image When taking the second image

    Press o to return to taking the firstimage.

    OK SMENUBACK GO

    Selected picture.

    Press 4 3 to scroll through the pictures.

    Pictures withR are erased.

    Select the pictures to be erased.Press o to add or eraseR to a picture to be deleted.

  • 8/8/2019 Olympus Cam Manual

    39/89

    EN 39

    Menuoperations

    When [PRESET] is selected

    When [V] is selected

    With the [ONE TOUCH WB] screen displayed, point the camera at a sheet of white paper.Position the paper so that it fills the screen, making sure there are no shadows.

    Press o. The new white balance is set.

    5 CAMERA MENU

    WB .................................................................................... Adjusting the color of a picture

    AUTO The white balance is adjusted automatically for naturalcolor, regardless of the light source.

    PRESET Selects the white balance according to the lightsource.

    5 Sunny day For shooting under a clear sky.

    3 Cloudy day For shooting under a cloudy sky.

    1 Tungsten light For shooting under tungsten lighting.

    w Fluorescent lamp 1 For shooting under daylight fluorescent lighting. (Thistype of lamp is mainly used in homes.)

    x Fluorescent lamp 2 For shooting under a neutral white fluorescent lamp.(This type of lamp is mainly used in desk lamps.)

    y Fluorescent lamp 3 For shooting under a white fluorescent lamp. (Thistype of lamp is mainly used in offices.)

    V One-touch WB For setting a more precise white balance than presetwhite balance can provide.You can set and save the optimum white balance forthe shooting conditions.

    Press 12 to select a white balance setting, then press o.

    MENU

    PRESET WB

    BACK SET OK

    1

    2

    o

    1/4001/400 F3.5F3.5

    P

    44INORMNORM10M10M

  • 8/8/2019 Olympus Cam Manual

    40/89

    40 EN

    Menuoperation

    s

    If set to [6400], [IMAGE SIZE] is limited to [H] and lower. If [FINE ZOOM] or [DIGITAL ZOOM] is set to [ON], [6400] cannot be set.

    You can take a sequence of pictures at one time by holding down the shutter button. The camera

    will take pictures continuously until you release the shutter button. Only [o] is available when [IMAGE QUALITY] is set to [RAW] or [RAW+JPEG]. When [c] or [d] is selected, other functions are restricted as follows.

    The flash mode is fixed at [$]. When [c] is selected, [IMAGE SIZE] is limited to [H] and lower and the number of pictures

    that can be taken continuously to approximately 30 or less (or approximately 20 or less when[H] and [L] are selected). When [d] is selected, [IMAGE SIZE] is limited to [I] andlower and the number of pictures that can be taken continuously to approximately 30 or less(including the 10 pictures when [PRE-CAPTURE] is set to [ON]).

    [ISO] settings will be restricted.

    ISO ....................................................................................... Changing the ISO sensitivity

    AUTO Sensitivity is automatically adjusted according to the conditions of thesubject.

    HIGH ISO AUTO This function has a higher sensitivity compared to [AUTO] andstabilizes the blur caused by a moving subject or camera movementwhen taking pictures.

    64/100/200/400/800/1600/3200/6400

    A low value reduces the sensitivity for daylight shooting of sharp, clearpictures. The higher the value, the greater the cameras light sensitivityand ability to shoot with a fast shutter speed and in low light conditions.However, high sensitivity introduces noise into the resulting picture,which may give it a grainy appearance.

    DRIVE ............................................................................................ Continuous shooting

    o Shoots 1 frame at a time when the shutter button is pressed.

    j Focus and exposure are locked at the first frame. The sequentialshooting speed varies depending on the setting of image quality.

    c Pictures can be taken at a faster speed than normal sequentialshooting.

    d Sequential shooting at a speed of approximately 13.5 frames/sec. [PRE-CAPTURE] can be set. When set to [ON], pressing the

    shutter button halfway stores 10 frames of a pictureimmediately before shooting.

    PRE-CAPTURE OFF / ON

    i Adjusts the focus 1 frame at a time. The shooting speed is slowerthan for normal sequential shooting.

    BKT Takes pictures sequentially while changing the exposure for eachframe (Bracket shooting). Focus and white balance are locked atthe first frame. When [BKT] is selected, the exposure differential and number

    of frames can be set.

    Exposure differential 0.3 / 0.7 / 1.0

    Number of frames 3 / 5

  • 8/8/2019 Olympus Cam Manual

    41/89

    EN 41

    Menuoperations

    This function allows you to zoom up to 30 by combining the optical zoom and image cropping.As data with few pixels are not converted to multiple pixels, there is no loss of image quality. [IMAGE SIZE] is limited to [I] and lower. [FINE ZOOM] cannot be used in combination with [DIGITAL ZOOM].

    The digital zoom can be used to take close-up pictures with stronger magnification than the opticalzoom.

    The [FACE DETECT] may not be able to detect the face for some subjects. If [FINE ZOOM] or [DIGITAL ZOOM] is set to [ON], [AREA] cannot be set.

    FINE ZOOM ................................. Zooming in on your subject without reducing image quality

    OFF /ON

    DIGITAL ZOOM .................................................................... Zooming in on your subject

    OFF /ON

    METERING ................................ Changing the area for measuring the brightness of a subject

    ESP Meters the brightness at the center of the monitor and the surroundingarea separately to capture an image with balanced brightness. Whentaking pictures against strong backlight, the center of the picture mayappear dark.

    n The AF target mark area is metered. Recommended for taking apicture against strong backlight.

    J Meters the brightness over a wide area with emphasis on the center ofthe screen. This method is used when you do not want to allowsurrounding light to affect the picture.

    AF MODE .............................................................................. Changing the focusing area

    FACE DETECT When a face is being detected in the screen, the camera will focus onthe face. A frame is displayed at the detected position.

    iESP The camera determines which subject within the screen to focus on.Even when the subject is not in the center of the screen, focusing ispossible.

    SPOT Focus selection is based on the subject within the AF target mark.

    AREA Move the AF target mark to select the area you want to focus on to take

    a picture.

    Zoom barWhite: The optical zoom areaYellow: The digital zoom area

    Optical zoom Digital zoom

    Maximum magnification:Still picture shooting modes

    Optical zoom digital zoom: Approx. 100 (max.)Movie shooting mode

    Optical zoom digital zoom: Approx. 60 (max.)

    WW TT0M10M

    P

    44INORMNORM 1/4001/400 F3.5F3.5WW TT0M10M

    P

    44INORMNORM 1/4001/400 F3.5F3.5

  • 8/8/2019 Olympus Cam Manual

    42/89

    42 EN

    Menuoperation

    s

    When [AREA] is selected

    AF predict continues to operate while the shutter button is pressed halfway ({ blinks). Depending on the subject, the picture may be out of focus even if [AF PREDICT] is set. During macro and super macro mode, [AF PREDICT] is not available.

    This function stabilizes the blur caused by camera movement when taking pictures.

    When taking pictures with the camera stabilized (using a tripod), set to [OFF]. Images may not be correctable if the camera is severely shaken. During night shooting or when the shutter speed is very slow, the Digital image stabilization

    mode may not work.

    Depending on situations such as shooting small subjects or distant backgrounds, it may beadvisable to adjust the amount of light emitted by the flash. In addition, this function is useful whenincreased contrast is desired.

    Press 12 to adjust, and press o.

    To move the AF target markThe AF target mark changes toV. Use the arrow pad tomove the position of the AF target mark.You can take pictures while in this status.

    To set the position of the AF target markHold down o.To change the position of the mark, hold down o again.

    FULLTIME AF ...................................... Shooting pictures while keeping the subject in focus

    OFF Press the shutter button halfway to focus.

    ON Fulltime AF keeps the subject in front of the lens in focus at all times,without having to press the shutter button halfway. The focusing timeis reduced, so you will not miss snapshot opportunities. Also, thesubject is automatically kept in focus during movie recording.

    AF PREDICT .................... Shooting pictures with the focus on subjects moving back and forth

    OFF AF predict is deactivated.

    ON When activated, position the AF target mark on the subject and pressthe shutter button halfway to engage the AF predict. Then, press theshutter button completely to take the picture.

    AF ILLUMINAT. ............................................. Setting to light the illuminator in a dark place

    OFF AF illuminator does not light.

    ON Press the shutter button halfway. The AF illuminator lightsautomatically, allowing you to focus in a dark place.

    IMAGE STABILIZER .............................. Shooting pictures using dual image stabilization

    OFF Dual image stabilization is deactivated.

    ON Dual image stabilization is activated after pressing the shutter buttonhalfway.

    w ............................................................ Adjusting the amount of light emitted by the flash

    -2.0EV to 0.0 to +2.0EV

    P

    1/4001/400 F3.5F3.5

  • 8/8/2019 Olympus Cam Manual

    43/89

    EN 43

    Menuoperations

    Selecting an emission level When flash is set to [SLAVE], flash mode automatically changes to [#] (Fill-in flash) for all flash

    modes except [$] (Flash off).

    It automatically starts recording for about 4 seconds after shooting pictures.When recording, aim the camera microphone at the source of the sound you want to record.

    QFLASH ........................................................................ Setting to use an external flashINT/EXT Allows you to take pictures using the built-in flash or a dedicated

    external flash.g External flash shooting (P.82)

    #RC Allows you to take pictures using a flash that is compatible with theOlympus wireless RC flash system.

    g Shooting with the Olympus wireless RC flash system (P.84)SLAVE When using a commercially available slave flash that is synchronized

    with the camera flash, the amount of the light emitted by the flash canbe adjusted in 10 levels.

    Press 12 to select an emission level from [1] to [10], then presso. The bigger number indicates the bigger amount of light emittedby the flash.

    The flash can fire in sequential shooting mode, but the intervalbetween shots will be longer if a high emission level is set.

    R (still pictures) ......................................................... Recording sound with still picturesOFF /ON

    > .................................................................. Adjusting the white balance compensation The white balance can be adjusted in 7 increments in both the

    [BLUE] and [RED] directions.

    12

    ::

    Each press makes the color more blue.Each press makes the color more red.

    Press o after setting is complete.

    PICTURE MODE ....................................................... Adjusting the color tone of the image

    VIVID Produces vivid colors.

    NATURAL Produces natural colors.

    SLAVE FLASH

    1

    MENUBACK SET OK

    >

    RED

    BLUE

    MENUBACK SET OK

  • 8/8/2019 Olympus Cam Manual

    44/89

    44 EN

    Menuoperation

    s

    This function may not work effectively with some shooting conditions or subjects.

    SHARPNESS ........................................................... Adjusting the sharpness of the image

    1 (Toward +) : The image contours are emphasized,making the image appear sharper. Ifyou adjust the sharpness too far toward+, noise may become conspicuous inthe picture.

    2 (Toward ) : The image contours are softened.

    CONTRAST ................................................................ Adjusting the contrast of the image

    1 (Toward +) : The light and dark areas are definedmore clearly, making the image lookcrisper.

    2 (Toward ) : The light and dark areas become lessdefined, giving the image a softerimpression.

    SATURATION ........................................................... Adjusting the saturation of the image

    1 (Toward +) : Colors become stronger.

    2 (Toward ) : Colors become weaker.

    NOISE REDUCT. .............................................. Reducing the noise during long exposures

    OFF Noise is not reduced. Noise may be conspicuous at slow shutter speeds.

    ON Noise is reduced. Shooting time takes twice as long as usual. Shootingis not available during noise reduction. Noise reduction can only be usedwhen the shutter speed is slower than 1/2 sec.

    MENU

    CAMERA MENU

    BACK SET OK

    PICTURE MODE

    SHARPNESS

    CONTRAST

    SATURATION

    NOISE REDUCT.

    1

    2

    3

    4

    5

    SHARPNESS

    0

    MENU

    CAMERA MENU

    BACK SET OK

    PICTURE MODE

    SHARPNESS

    CONTRAST

    SATURATION

    NOISE REDUCT.

    1

    2

    3

    4

    5

    CONTRAST

    0

    MENU

    CAMERA MENU

    BACK SET OK

    PICTURE MODE

    SHARPNESS

    CONTRAST

    SATURATION

    NOISE REDUCT.

    1

    2

    3

    4

    5

    SATURATION

    0

  • 8/8/2019 Olympus Cam Manual

    45/89

    EN 45

    Menuoperations

    If you will be taking pictures over a long period, make sure to use fully charged batteries or theAC adapter.

    If any of the following operations occur during sleep mode, the camera cancels the timelapsemode and returns to normal shooting.

    Opening the battery compartment cover, opening the card cover, connecting the camera to acomputer, operating the shutter button, arrow pad or other button.

    If the internal memory/card becomes full or the battery power runs out during timelapse shooting,a warning is displayed, timelapse stops and the camera automatically turns off.

    Set this function when shooting with the camera using a conversion lens (option) specified byOlympus. Using the built-in flash with the conversion lens attached can cause vignetting. Use an external

    flash if required. When the conversion lens is attached, the camera may take some time to focus.

    If the camera is more than 1 m (3.3 ft.) away from the source of the sound, sound may not be

    recorded clearly. When [R] (movies) is set to [ON], [IMAGE STABILIZER] is not available. If [FULLTIME AF] and [R] (movies) are both set to [ON], the sound of operating lens may be

    recorded.

    This function allows you to turn off operational sounds that occur during shooting and playback,warning beeps, shutter sounds, etc.

    TIMELAPSE .............................. Shooting pictures automatically as defined by set conditions

    OFF Timelapse shooting is deactivated.

    ON Timelapse shooting is activated.

    When setting the timelapse shooting Press 4 3 to select [PICTURES] and [INTERVAL]. Press 12 to set the value. Press o to set. The first picture is taken when the shutter button is pressed, and

    the pictures thereafter are automatically taken. During timelapse, the Lmark lights on the monitor. When recording to either the internal memory or the card, and

    after the first picture is taken, the camera enters sleep mode. Thecamera automatically reactivates from sleep mode 4 secondsprior to taking the next picture.

    When the preset number of pictures is taken, the cameraautomatically turns off.

    1 ........................................................................... Shooting pictures with conversion lensOFF /ON

    R (movies) ......................................................................... Recording sound with moviesOFF /ON

    6 SILENT MODE Setting to turn off operational sounds

    OFF /ON

    TIMELAPSE

    PICTURES

    2

    INTERVAL

    1

    MENUBACK SET OK

    Number ofshots: 2 to 99

    Shootinginterval: 1 to99 minutes in1 minuteintervals

  • 8/8/2019 Olympus Cam Manual

    46/89

    46 EN

    Menuoperation

    s

    g SETUP menus (P.52)SILENT MODE Setting to turn off operational sounds (P.45)

    The factory default settings are displayed in gray ( ).

    Only the first frame of each movie is displayed. Press o orm to cancel the slideshow.

    This function allows you to correct the taken picture and save it as a new picture.

    When red eye is not detected with [REDEYE FIX], press 4 to cancel the correction. Movies, pictures shot by another camera, and previously fixed or edited pictures cannot be corrected. Some pictures may not be corrected completely. Editing an image may cause it to suffer a minor loss in quality.

    Playback mode menu

    4EDIT 6PLAYBACK MENU

    RAW DATA EDIT*2

    Q*2

    P*2

    COLOR EDIT*2

    FRAME*2

    LABEL*2

    CALENDAR*2

    LAYOUT*2

    EXPRESSION EDIT*2

    FACE FOCUS*2

    INDEX*3

    EDIT*3

    MOVIE INDEX*3

    0yRINDEX PLAY

    *1 A card is required.

    *2 This is not displayed when amovie is selected.

    *3 This is not displayed when thestill picture is selected.

    1 SLIDESHOW Playing back pictures automatically

    Select the transition effect between pictures from [TYPE] andpress o. The [BGM] selection screen is displayed. After selectingthe [BGM], press o to start the slideshow.

    TYPE NORMAL /SCROLL/FADER/

    SLIDE/ZOOM DOWN/ZOOM UP/

    CHECKERBOARD/BLINDS/SWIVEL/RANDOM

    BGM OFF / 1 / 2

    2 PERFECT FIX

    Select the item to be corrected with 12 and press o.

    Select the picture with 4 3 and press o.

    ALL Lighting fix and red-eye fix are activatedtogether.

    LIGHTING FIX Only the dark areas of an image arecorrected. Underexposed areas caused bytaking pictures against backlight or insufficientlighting are brightened.

    REDEYE FIX Only red-eye fix is activated.

    q

    MENUEXIT SET OK

    ERASEERASE

    EDITEDITPLAYBACKMENUPLAYBACKMENUPERFECTFIXPERFECTFIX

    SILENTMODESILENTMODE

    SLIDE-SHOWSLIDE-SHOW PRINTORDERPRINTORDER

    SETUPSETUP

    CALENDARCALENDAR

    5*14

    1

    2

    3

    7 6

    TYPE

    NORMAL

    SCROLL

    FADER

    SLIDE

    ZOOM DOWN

    MENUBACK SET OK

    PERFECT FIX

    SET OK

    LIGHTING FIX

    REDEYE FIX

    ALL

    MENUEXIT

  • 8/8/2019 Olympus Cam Manual

    47/89

    EN 47

    Menuoperations

    This function lets you playback the pictures in a calendar format, organized by the date the imageswere recorded.

    Adjusts the pictures recorded in raw data format and stores them as new pictures in JPEG format.

    Items that can be set with [RAW DATA EDIT]

    * Available only when the picture is taken with [WB] set to [V].

    This changes the image size of a picture and saves it as a new file.

    Designates and crops part of a still picture and saves it as a new file.

    This function lets you change the color of a picture and save it as a new picture.

    3 CALENDAR Playing back the pictures in a calendar format

    4 EDIT

    RAW DATA EDIT ....................................... Editing the pictures recorded in raw data format

    Item Settings Ref. Page

    IMAGE QUALITY IMAGE SIZE : F/H/I/J/K/C/DCOMPRESSION: L/M

    P.34

    WB AUTO/PRESET/V* P.39

    > RED7 - BLUE7 P.43

    PICTURE MODE VIVID/NATURAL P.43SHARPNESS -5 - + 5 P.44

    CONTRAST -5 - + 5 P.44

    SATURATION -5 - + 5 P.44

    Q ...................................................................................... Changing the size of picturesC 640 480 /E 320 240

    P .......................................................................................... Cropping a part of pictures Press 4 3 to select the image to crop, and press o. Use the arrow pad and the control dial to adjust the position and

    size of the picture, and press o.

    COLOR EDIT .................................................................... Changing the color of a picture

    Select the picture with 4 3 and press o. Select your desired color with the arrow pad, and press o.

    1 BLACK & WHITE This changes the picture to black and white.

    2 SEPIA This changes the pictures to sepia.

    3 SATURATION

    (HARD)

    This enhances the saturation of the picture.

    4 SATURATION(SOFT)

    This slightly enhances the saturation of thepicture.

    SET OK

    COLOR EDIT

    1 2

    3 4

  • 8/8/2019 Olympus Cam Manual

    48/89

    48 EN

    Menuoperation

    s

    This function lets you select a frame, integrate the frame with an image, and save it as a new picture.

    This function lets you select a label, integrate the label with an image, and save it as a new picture.

    This function lets you select a calendar format, integrate the calendar with a picture, and save it asa new file.

    FRAME .................................................................................. Add a frame to your picture

    Select the picture to be framed with 4 3, and press o.(Press 12 to turn the picture 90 degrees clockwise or 90degrees counterclockwise.)

    Select a frame with 4 3 and press o. Use the arrow pad and the control dial to adjust the position and

    size of the picture, and press o.

    LABEL .................................................................................... Add a label to your picture

    Select the picture with 4 3 and press o. Select the label with 4 3, and press o. (Press 12 to rotate the

    picture 90 clockwise or counterclockwise.) Use the arrow pad and the control dial to adjust the position and

    size of the label, and press o. Set the color of the label with the arrow pad, and press o.

    CALENDAR ......................................................... Create a calendar print with your picture

    Select the picture with 4 3 and press o. Select the calendar with 4 3, and press o. (Press 12 to rotate

    the picture 90 clockwise or counterclockwise.) Set the date of the calendar, and press o.

    LAYOUT ..................................................................... Creating an index layout of pictures

    ALL IMAGES All pictures in the internal memory or the card are added to the layout.

    CALENDAR A monthly calendar appears and the pictures you want to make layoutare selected by the date.

    SEL. IMAGE Pictures that you want to make layout are specified one by one.

    Press 4 3 to select a layout, and press o. Select the type of layout picture, and press o. Select the pictures and press o. (When [SEL. IMAGE] is selected

    in [LAYOUT] screen, press 12 to rotate the picture 90clockwise or counterclockwise.)

    OK

    FRAME

    SETMOVE

    OK

    LABEL

    SET

    OK

    CALENDAR

    SET

    MENU

    LAYOUT

    BACK SET OK

    ALL IMAGES

    CALENDAR

    SEL.IMAGE

  • 8/8/2019 Olympus Cam Manual

    49/89

    EN 49

    Menuoperations

    This function lets you transform a face that is largest and facing front in the picture, and save it asa new picture. Select the picture with 4 3 and press o. Use the arrow pad to select the desired effect, and press o. The face may not be detected correctly for some subjects.

    This function lets you change the largest face that is facing the front and save it as a new picture. Select the picture with 4 3 and press o. The face may not be detected correctly for some subjects.

    This function extracts 9 frames from a movie and saves them as a new picture containingthumbnails of each frame.

    Allows you to specify a part of the movie and overwrite it, or save it as a new movie.

    Allows you to capture a frame from the movie and save it as a still image in JPEG format.

    This function allows you to save printing data (the number of prints and the date and timeinformation) with the pictures stored on the card.g Print settings (DPOF) (P.61)

    EXPRESSION EDIT ...................................................... Transforming a face in the picture

    FACE FOCUS ................................................................. Showing up a face in the picture

    INDEX ...................................................................... Making an index picture from a movie

    Use 4 3 to select a movie and press o. Use the arrow pad to select the first frame of the part you want to

    keep, and press o. In the same manner, select the last frame ofthe part you want to keep and press o.

    EDIT ................................................................................... Extracting a part of the movie

    Select [NEW FILE] or [OVERWRITE], and press o. Use the arrow pad to select the first frame of the part you want to

    keep, and press o. In the same manner, select the last frame ofthe part you want to keep and press o.

    MOVIE INDEX ......................................................... Capturing a still image from the movie

    Use 4 3 to select a movie and press o. Use the arrow pad to select the frame to capture, and press o.

    5 PRINT ORDER Making print reservations (DPOF)

    SELECT FIRST FRAME

    SET OK

    00:00 /00:3600:00 /00:36

    SELECT FIRST FRAME

    SET OK

    00:00 /00:3600:00 /00:36IN

    00:00 /00:3400:00 /00:34SET OK

  • 8/8/2019 Olympus Cam Manual

    50/89

    50 EN

    Menuoperation

    s

    Pictures taken with the camera held vertically are displayed horizontally during playback. Thisfunction allows you to turn such pictures so that they are displayed vertically. New pictureorientations are saved even when the power is turned off.

    Select the picture with 4 3, and rotate it by selecting [U+90], [V0] or [T-90] with 12. Youcan rotate several frames in succession.

    6 PLAYBACK MENU

    0 ................................................................................................... Protecting picturesOFF /ON

    Protected pictures cannot be erased with [ERASE]/[SEL. IMAGE]/

    [ALL ERASE], but they are all erased by formatting. Select the picture with 4 3, and protect it by selecting [ON] with

    12. You can protect several frames in succession. When apicture is protected,9 is displayed on the monitor.

    y ........................................................................................................ Rotating picturesU+90/ V0 /T-90

    R ........................................................................................ Adding sound to still picturesYES / NO

    Sound is recorded for about 4 seconds. Use 4 3 to select a picture, select [YES] and press o to start

    recording. The [BUSY] bar will be temporarily displayed.

    INDEX PLAY ................................................... Selecting the playback position of the movie

    Movies are played from the specified position. Use the arrow pad to select a frame. Press o to start playback

    from the selected frame. Use the control dial to change the number of displayed index

    frames.

    ON

    OFFOFF

    EXIT OK

    0

    EXIT OK

    y

    U

    t

    +90

    EXIT OK

    y

    U

    t

    0 -90

    EXIT OK

    y

    U

    t

    SET OKMENUBACK

    NO

    YESYES

    R

  • 8/8/2019 Olympus Cam Manual

    51/89

    EN 51

    Menuoperations

    Protected pictures cannot be erased. Cancel protection before erasing protected pictures. Onceerased, pictures cannot be restored. Check each picture before erasing to avoid accidentallyerasing pictures you want to keep. When erasing the picture in the internal memory, do not insert the card into the camera. When erasing the picture from the card, insert a card into the camera in advance. You can confirm on the monitor whether the internal memory or card is being used.

    g Using the internal memory or card (P.85)

    Select [YES], and press o.

    7 ERASE Erase selected pictures/Erase all pictures

    SEL. IMAGE ............................................................................ Selecting images to erase

    Use the arrow pad to select a picture, and press o to addR. Press o again to cancel the selection. When the selection is completed, pressf/S. Select [YES], and press o.

    ALL ERASE ..................................... Erase all the pictures in the internal memory or the card

    1

    4

    2

    5

    3

    6

    IN

    OK SMENUBACK GO

    SEL. IMAGE

  • 8/8/2019 Olympus Cam Manual

    52/89

    52 EN

    Menuoperation

    s

    *1 A card is required.*2 Not available when the mode dial is set ton.*3 Not available when the mode dial is set toh.

    All existing data, including protected pictures, are erased when the internal memory or card isformatted. Make sure that you save or transfer important data to a computer before formatting. Make sure there is no card inserted in the camera when formatting the internal memory.

    Be sure that the card is inserted in the camera when formatting the card. Before using non-Olympus cards or cards which have been formatted on a computer, you must

    format them with this camera.

    Insert the optional card into the camera. Copying data does not erase the picture in the internal memory. It takes some time to back up data. Check if the battery is not empty before starting the copy, or

    use the AC adapter.

    You can select a language for on-screen display. Available languages vary depending on the area

    where you purchased this camera.

    Select [2] and press o to set the still picture saved in the internal memory or card as the startupscreen.

    When [SCREEN] is set to [OFF], [VOLUME] cannot be set.

    SETUP menus

    Shooting mode

    SETUP

    MEMORY FORMAT(FORMAT*1)

    BACKUP*1

    WPW ON SETUPMENU COLORSOUND SETTINGSREC VIEW

    MENU DISPLAYCONTROL PANELFILE NAMEPIXEL MAPPINGsX

    DUALTIMEALARM CLOCK

    VIDEO OUTFRAME ASSIST*2

    u*2

    MY MODE SETUP*2*3

    m/ftAEL/AFL BUTTON*2

    CUSTOM BUTTON*2*3

    MANUAL FOCUS*2*3

    SLEEP

    Playback mode

    MEMORY FORMAT (FORMAT) .............................. Formatting the internal memory or card

    BACKUP ............................................... Copying pictures in the internal memory to the card

    W .................................................................................... Selecting a display language

    PW ON SETUP ........................................................ Setting the startup screen and sound

    SCREEN OFF (No picture is displayed.) / 1 / 2

    VOLUME OFF (No sound) / LOW / HIGH

    MENU COLOR ................................................................... Setting the menu screen color

    NORMAL / COLOR1 / COLOR2 / COLOR3

    S C NS C N

    RESETRESET

    PANORAMAPANORAMA

    CAMERAMENUCAMERAMENUSILENTMODESILENTMODE

    MENUEXIT SET OK

    IMAGEQUALITYIMAGEQUALITY

    SETUPSETUP

    MENUEXIT SET OK

    ERASEERASE

    EDITEDITPLAYBACKMENUPLAYBACKMENUPERFECTFIXPERFECTFIX

    SILENTMODESILENTMODE

    SLIDE-SHOWSLIDE-SHOW PRINTORDERPRINTORDER

    SETUPSETUP

    CALENDARCALENDAR

  • 8/8/2019 Olympus Cam Manual

    53/89

    EN 53

    Menuoperations

    You can make the following settings with [SOUND SETTINGS]. Setting the type of button operation sounds and volume. (BEEP) Selecting the sound and volume of the shutter button. (SHUTTER SOUND) Adjusting the volume of the camera warning sound. (8) Adjusting the volume during playback. (q VOLUME)

    You can set all the sounds muted at once by setting [SILENT MODE].g SILENT MODE Setting to turn off operational sounds (P. 45)

    Perform next operation to set whether to display on the monitor or viewfinder. When m is pressed Whenf/S is pressed in the playback mode Whenq/P is pressed in the shooting mode

    g o button (OK/FUNC) Setting using the control panel or function menu (P.28)Operations using the control panel (P.29)

    SOUND SETTINGS .......................................... Setting the sounds output from the camera

    BEEP SOUND TYPE 1 / 2

    VOLUME OFF (No sound) / LOW /