olled DELTRAK 2.5 Radio-contr QUATRAK - … · KUBOTA 3-cylinder turbo diesel engine 27.5 kW (38.0...
Transcript of olled DELTRAK 2.5 Radio-contr QUATRAK - … · KUBOTA 3-cylinder turbo diesel engine 27.5 kW (38.0...
1865
J. Rilling founded a production company for mills in Dusslingen. The corn mills and industrial coffee mills were delivered worldwide.
1928
The first worldwide type HM bar mower was developed by IRUS and awarded a patent in the same year. IRUS started motor engineering.
1953
IRUS introduced the single-axle machine U 600 into agriculture; in the following years, the types U 300, U 900 and U 1200 with ZF gears were built for universal use.
1968
The most successful mower of IRUS was the famous “MICKY”, with which IRUS managed to develop and produce an until then unknown small and lightweight mower.
thIn the same year, the 10,000 Micky left the plant in Dusslingen.
1985
IRUS got a new owner.The product series was adjusted to the current needs of customers.
1986IRUS presented a worldwide innovation: a bar mower with differential
lock, steering brakes and low-pressure Terra tyres - the KM 300.
2003
Start of the production of a new generation of hydrostatic carrier machines.The HYTRAK marked the beginning of a new era. At the demopark trade show in Fulda, the first radio-controlled machine of IRUS - KOMTRAK 25 - was pre-sented and awarded an innovation medal.
2004
With the KOMTRAK, IRUS presented the strongest single-axle machine of the world.
2005
Market introduction of the DELTRAK, the first radio-controlled flail-type mower with crawler-mounted running gear.
2008
IRUS celebrated 80 years of motor engineering. Innovations and quality for decades!
2011
Market launch of the QUATRAK, the first radio-controlled carrier machine with four-wheel drive and all-wheel steering.
DELTRAK
Micky
HM
KOMTRAK
KM 300
Company history
1
Unusual tasks require unusual solutions.In order to counteract scrub encroachment,
even the hardest to reach and landslide-threatened slopes must be kept free.
Compared to the previous practice with string trimmers or hand-operated single-
axle machines, these are some of the resulting crucial
advantages
Clear saving of costs compared to the previous use with string trimmers:One operator completes the work of several workers in the same time or as compared to hand-operated single-axle machines.The work speed is no longer controlled by the walking speed of the operator. This can cut the required working time in half.
Highest possible security:The operator is outside the danger zone.
Preservation of the operator's health:No climbing, no slipping, no getting stuck on branches, thorns and scrub, no vibrations on the beam, no exhaust fumes in the immediate vicinity, no load for the joints.
Why
radio-controlled?
2
DELTRAK 2.5- 38 PS diesel engine (Kubota)- hydraulic caterpillar drive- hydraulic device drive- carrier machine
3
Motor: KUBOTA 3-cylinder turbo diesel engine 27.5 kW (38.0 PS), water-cooled, electric start, operating hours counter, oil and temperature control
Cleaning fan:cleaning function for engine and hydraulic cooling
Drive:hydraulic crawler running gear with direct drive, proportional speed control for each crawler running gear via radio control, forward as well as in reverse, adjustment of the crawler running gears with rotary potentiometer on the hand-held transmitter (simplifies working on steep slopes)
Speeds:forward: 0 - 10 km/h | reverse: 0 - 10 km/hMaximum speed continuously adjustable via rotary potentiometer on the hand-held transmitter
Track width:1100 - 1250 mm (continuously adjustable)
Max. slope gradient:50° | 120% (depending on surface)
Radio range:approx. 200 - 300 m (visibility range)
Standard functions:- driving / steering (continuously adjustable, proportional)- engine start / engine stop- continuously adjustable control of the engine speed- continuously adjustable control of rotational speed and direction of rotation of the power take-off- horn- mirroring of the drive control- lifting of the accessory device
Optional functions:- control of ancillary hydraulic cylinders
Weight:approx. 820 kg
(base machine incl. crawler running gear; without accessory device)
Technical data
4
DE
LT
RA
K 2
.5
Motor:- powerful 3-cylinder Kubota turbo diesel engine
Engine swivelling:- engine swivelling to ensure optimal engine lubrication in the threshold
Cover:- completely covered for protection against branches and shrubs- covers can be opened without tools
Cleaning fan:- automatic cleaning function for hydraulics and engine cooling
DE
LT
RA
K 2
.5
5
DE
LT
RA
K 2
.5Crawler running gear:- delta gear- hardened drive and guide pulleys- mechanical, durable chain pull
Radio control:- proven radio technology- range up to 300 m- abdominal belt and should strap
Optional:- different crawler chains- hoop guard / 3-point suspension- front and rear LED work lights- circumferential light- lateral adjustment- NATO socket for the operation of high-current consumers (e.g. cable winches)- tilt switch
6
EVOTRAK
- 30 PS petrol engine (Kohler)- hydraulic caterpillar drive- hydraulic device drive- carrier machine
7
Motor: KOHLER 2-cylinder 4-cycle OHV
petrol engine 22.4 kW (30.5 PS), air-cooled, electric start,
operating hours counter
Drive:permanent hydraulic drive for
both crawler running gears, proportional speed control for
each crawler running gear via radio control, forward as well as
in reverse, adjustment of the crawler running gears with rotary
potentiometer on the hand-held transmitter (simplifies working on
the steep slopes)
Speeds:forward: 0 - 6 km/h | reverse: 0 - 6 km/hMaximum speed continuously adjustable via rotary potentiometer on the hand-held transmitter
Track width:1250 mm
Max. slope gradient:50° | 120% (depending on surface)
Radio range:approx. 200 - 300 m (visibility range)
Standard functions:- driving / steering (continuously adjustable, proportional)- engine start / engine stop- continuously adjustable control of the engine speed- switching the power take-off on and off- horn- mirroring of the drive control- lifting of the accessory device
Weight:approx. 640 kg
Technical data
EVOTRAK „Solar”- Design height: max. 70 cm- Special protection from stone chipping
8
EV
OT
RA
K
QUATRAK
- 30 PS petrol engine (Kohler)- hydraulic 4x4 wheel drive- all-wheel steering- hydraulic device drive- carrier machine
9
Motor: KOHLER 2-cylinder 4-cycle OHV petrol engine 22.4 kW (30.5 PS), air-cooled, electric start, operating hours counter
Drive: permanent hydraulic drive of all four wheels or spiked rollers, proportional speed control and steering via the radio control, forward as well as reverse, adjustment of the wheels via rotary potentiometer on the hand-held transmitter (simplifies working on the steep slopes)
Speeds: forward: 0 - 7 km/hreverse: 0 - 7 km/hMaximum speed continuously adjustable via rotary potentiometer on the hand-held transmitter
Track width:850 - 1400 mm (depending on tyres)
Max. slope gradient: 50° | 120% (depending on surface)
Radio range: approx. 200 - 300 m (visibility range)
Standard functions:- driving / steering (continuously adjustable, proportional)- engine start / engine stop- continuously adjustable control of the engine speed- switching the power take-off on and off- horn- mirroring of the drive control- lifting of the accessory device
Optional functions:- crab steering
Total weight:approx. 500 - 600 kg (depending on equipment and accessory device)
Technical data
10
QU
AT
RA
K
Motor:- modern 2-cylinder OHV 4-cycle petrol engine
Engine swivelling:- engine swivelling to ensure optimal engine lubrication in the threshold
Underbody protection:- complete underbody protection against damage from surface irregularities, rocks, root stocks, etc.
Compactness:- low design height, compact dimensions
11
EV
OT
RA
K / Q
UA
TR
AK
Crawler running gear: .
(only on EVOTRAK)
- delta gear- hardened drive and guide pulleys- mechanical, durable chain pull
All-wheel steering / drive: (only on QUATRAK)
- permanent 4x4 all-wheel drive with all-wheel steering- separate single wheel steering- very manoeuvrable and soil conserving
Optional:- crab steering (only on QUATRAK)
- different tyre variants (only on QUATRAK)
- different crawler chains (only on EVOTRAK)
- 3-point suspension (only on EVOTRAK)
- circumferential light- tilt switch
12
EV
OT
RA
K / Q
UA
TR
AK
Radio control:- proven radio technology- range up to 300 m- abdominal belt and should strap
Flail-type mower
- to mow grass and shrubs
- different blades and flails available
- height adjustment via castor rollers and skids
- high-performance belt drive
- optional: chain safety curtain
Safety mulcher
- to mow grass and shrubs
- worm shaft with replaceable tooth segments
- height adjustment via castor roller
- little stone chipping
High grass mowing device / swing mower
- to mow grass with a height of up to approx. 40 cm
- six pendulum blades: System ESM Verti-2-Flail
- height adjustment via skids or optional lead wheels
- optional: lead wheels + castor roller
EV
OT
RA
K
DE
LTR
AK
2.5
QU
AT
RA
K
125 / 1
45 c
m--
-
---
125 c
m125 c
m125 c
m105 / 1
25 c
m105 / 1
25 c
m105 / 1
25 c
m
Mowing/mulching
13
Disc mower
- to mow grass, e.g. if it has to be cleared or is intended for further use
- three or four mowing plates with two knife blades / pendulum blades each
- extensive grass cuttings tray
Front mower / side mower
- double-blade bar mower system ESM Bidux
- the bar can be swivelled to the front or completely to the side of the machine
- the bar can additionally be swivelled approx. 75° up and down, e.g. in order to mow ditches, for hedge trimming, etc.
- optional: hydraulic swivelling and lifting
Hay machine / belt rake
- to clear away the grass cuttings
- drive via two V-belts with controlled prongs
- lead wheels for height adjustment
- adjustable wheels for windrow forming
EV
OT
RA
K
DE
LTR
AK
2.5
QU
AT
RA
K
115 / 1
50 / 1
90 c
m--
-
---
145 c
m145 c
m145 c
m130 / 1
70 c
m130 c
m130 c
m
Mowing/clearing
14
Forest mulcher with stationary teeth
- for milling off shrubs, wood and root stocks
- carbide tipped cutting teeth
- for wood with up to approx. 10 cm Ø and root stocks with up to approx. 20 cm Ø
- front panel with hydraulic actuation
- vertical adjustment with skids
- optional: rigid/hydraulic push bar
Forest mulcher with swinging-through hammers
- for mulching shrubs and wood
- cage rotor with swinging through forest hammers
- for shrubs and wood with up to approx. 10 cm Ø
- front panel with hydraulic actuation
- vertical adjustment with skids
- optional: rigid/hydraulic push bar
Push bar
- rigid or hydraulic
EV
OT
RA
K
DE
LTR
AK
2.5
QU
AT
RA
K
125 c
m--
-
---
• ---
---
125 c
m--
-
---
Forest
15
Stump cutter / root stump grinder
- carbide tipped cutting teeth
- hydraulically rotatable to the left and the right
Chaff cutter
- for chaffing/cutting wood with a branch thickness of up to 90 mm Ø
- continuously adjustable draw-in rollers
- adjustable discharge chute
EV
OT
RA
K
DE
LTR
AK
2.5
QU
AT
RA
K
• ---
---
• ---
---
Forest
16
Reverse cutter
- for tilling/milling soil, lawn, etc.
- rocks or lawn soil are dug in
- depth adjustment via screen roller
Weed broom / weed brush
- for mechanical removal of weeds, e.g. on kerbs, border stones, cobblestones, etc.
- wire bundles can be replaced individually
- brush disc rotatable to both sides, tilt adjustable on two levels
- stone chipping protection
- optional: hydraulic adjustment
EV
OT
RA
K
DE
LTR
AK
2.5
QU
AT
RA
K
• ---
---
100 c
m--
-
---
Tillage
Weed removal
17
Zaugg hard snow thrower
- for clearing out hard and soft snow
- clearing height 70 cm
- steel scrape rail and skids
- casting direction and distance hydraulically adjustable
Snow plough blade
- for clearing out soft snow
- for snow heights of up to approx. 20 cm
- rubber scrape rail
- hydraulically rotatable to the left and the right
EV
OT
RA
K
DE
LTR
AK
2.5
QU
AT
RA
K
100 / 1
30 c
m--
-
---
125 / 1
50 c
m--
-
---
18
Snow-ploughing
clearance
Your specialist retailer:
IRUS Motorgeräte GmbHHäuslerwasen 3 · D-72393 Burladingen-SalmendingenPhone: +49(0)7126/928949-0 · Fax: +49(0)7126/928949-99E-mail: [email protected] · Internet: http://www.irus.de/
Issued 01/2016Changes and printing/translation errors expressly reserved.
© IRUS Motorgeräte GmbH