OilTech 2018/19 Low... · 2020-01-07 · OilTech Group - Land Drilling 2 OilTech have catwalk...
Transcript of OilTech 2018/19 Low... · 2020-01-07 · OilTech Group - Land Drilling 2 OilTech have catwalk...
www.oiltech-group.co.uk GENERAL BROCHURE
Oilfield handling...land and offshore
Rig Mechanisation...hands free operation...semi-automation
OilTech 2018/19
Mechanical Handling Equipment.... for 40 years
OilTech Group - Land Drilling
2
OilTech have
catwalk machines and
ancillaries to suit every
aspect of tubular handling
• Workover activities
• Drilling activities
• Casing Running
Workover Units and Drilling Units
• WDU2 - For range 2tubulars upto 51/2” diameter
• WDU3 - For range 3
• TDU-FS Freestanding Catwalk Machinefor upto 20” casing, 40’ long
• TDU-R with integrated ramp for 20” casing, 40’ long and Drillfloorsupto 55’
• Basic controls, semi automated orwireless controls
• Hydraulic Bins
• Gantry Crane loading (auto)
• Lift-off units
• Catwalk walkers
• Trailing Arms
• Integrated or rig power units
• Variety of control positions
STANDARD or BESPOKE
3
Oiltech developed the Tubular Management Systems for a desert application in 2009. Therig was fairly standard; the difference was the Well plan whereby wells where spaced at4 metres apart arranged in 2 straight lines (parallel) about 1 km in length. This was avery cost effective solution to service the field and, with horizontal drilling the field ofaround 15km in diameter could be serviced. The MPU (Mobile Pipehandler Unit) is arectangular frame in a ‘goalpost’ section to which enables the frame to travel over thetop of the BOP’s on active wells. The PTC (Pipe Transfer Conveyor) was mounted on topof the MPU and was inclined so that the front end sits on the Drillfloor. A Tailing Arm wasadded to the end of the PTC to provide safe handling onto Drillfloor.
Automation and Zone ManagementIn 2012 we received a repeat order for 4 similar systems, however these new systemsrequired semi-automation of functions and zonal management, effectively our PTC’sneeded to talk to the drillers ZMS and prevent any equipment clashes and prevent anypersonnel safety issues. This involved providing a bespoke Hydraulic Power Unit withcomputer and positional detection on all functions and dual controls (remote and station).
Slave Controls Master Controls (Remote) Hydraulic Power Unit
4
Racking boards
Oiltech Racking boards are all weldedconstruction, designed to suit the dynamic and environmental loadings.They can be supplied with manual latches, pneumatically controlled or spear type (fully restraint).
Bridge Crane Racking System Oiltech has the following range ofBridge Crane Racking Systems.
Monkey board (diving board)
• Cantilevered• Hinged• Telescopic
Type SWL Lift Type Lift Drillpipe Collar CasingBR3 3T tool joint 15 handleBR8 8T tool joint 18BR10 10T tool joint 18BR13 13T tool joint 18BR3G 3T grip lift 8 handleBR10G 10T grip lift 8
5
HTV arm (Horizontal to Vertical)
Oiltech HTV arms are used for transferring tubulars from the horizontal to vertical position, presenting thetubular to the mousehole.
The HTV assembly is freestanding and will fit intomost derricks. The HTVarm is an essential part ofstandbuilding off-line.
Catwalk Machine
Oiltech’s Catwalk Machine canhandle up to 36” tubular (orseveral smaller tubulars)and transports the tubularfrom the loading position tothe well centre.
6
Oiltech’s off-line standbuild system comprises of a standbuild arm,lifting winch, powered mouseholeand centraliser (if used with HTV arm)
Standbuild Systems
For off-line standbuilding whereby restrictions apply Oiltech offer a standbuild crane mounted above the racking board
Can be fitted to masts and smaller derricks.
Pipe Centraliser
7
TPS - Total Pipehandling System -Jack-up.
Oiltech’s TPS system is fully mechanisedsystem. The TPS system allows both‘centre well operations’ and ‘stand-building operations’ to be conducted at the same time. ABS approved.
The full range of products include:-DerrickBridgecrane rackingRacking boards/monkeyboardDrillfloor manipulator armsHTV arm, CabStandbuild armIron roughneckRetractable dollyDrillfloor manipulator armTailing armCasing stabbing basketPowered mouseholeCentraliserCatwalk machineCasing tong hangerPipehandling craneCantilever skiddingDrillfloor skiddingBOP hoists / support framesConductor tensioning unitCentralised power unit
According to one of our clients theability to do ‘offline and online’ at
the same time produced anoperational saving of $1,300,000
per well
8
Complete Packages
Pipehandling Crane (20m, 3.5T)Oiltech’s pipehandling crane is for use oncantilever. 3.5T SWL with 20m maximumreach. (shown above)
Oiltech have alliances withother Crane supplies (eg Interseas and Iron Fist)and can supply Cranes andmost applications.
9
DFMA DrillFloor Manipulator Arm
Oiltech’s DFMA is used for a variety of drillfloor duties ranging fromracking of tubular to tailing of casing and risers
Oiltech’s DFMA can be floor mounted as aboveor underslung mounted beneath the guiderailbracing. DFMA comes with a range of headsfor handling collars or risers with buoyancymodules.
CSB Telescopic Casing Stabbing Basket
Trailing Arms and Stabilising Arms
Heavy duty CSB (semisubmersibles) Light duty CSB (Jack-ups).
10
CTU Conductor Tensioning Unit
Oiltech Conductor Tensioning Units are built to
suit precise requirements of the Jack-up.
Bulkhead Guidance System
Bulkhead guidance systems are usedto restrain the BOP and trees duringtransportation from centre of rig to storage position
Hydraulic Power Units
Oiltech provide a range of Power Unitsfrom dedicated units (dedicated to a particular piece of equipment) to Centralised Power Units (4 x 200HP)
Power Units can include acousticenclosure and air cooling systems.
11
Cellar Deck Handling (Semis and Drillships)
Subsea Handling equipment needs to be simple, robust and reliable. Oiltechhave a range of equipment which are grouped together to provide the bestsystems. The products include:-
BOP transporterBOP cartBOP service craneBaseplate trolleyTree trolleySkidding systemsBOP chain hoistsBulkhead guidance framesRetractable test stumps Dedicated power unit
The most common handling system on a semisubmersible is the BOP transporter,with sideways skidding and baseplate/treetrolley.
This system has the advantage of beingable to test the BOP in one piece.
Oiltech offer a consultancy service whereby we specifythe most cost effective systemwithin the physical constraintsof the rig and the clients budget.
12
Bespoke Cranes
It is often the case that a transporter system (previous page) is not suitable for the moonpool layout, or it may be necessary to UPGRADE the existing system; in some cases the transporter system may need to be replacedwith an overhead Crane, or overhead Cranes working in tandem. Oiltechoffer a consultancy service to provide the most cost effective solution.
Splashzone guidance
Oiltech provide a robust splashzone guidanceunit which is mounted on the underside of themoonpool and is telescopic. This system restrains the BOP whilst in the splashzone.
BOP Handling on a Jack-up or Land
The BOP on a Jack-up is lighterand the handling is often simpler.Oiltech provide a range of chainhoists, elevators and transportercranes.
13
Riser Management - Horizontal
Oiltech provides complete Riser Management System providing thedesign of equipment from the storage rack to the centre well.
Riser gantry cranes2 Cart handlingRiser catwalk (as shown)Tailing armRiser spiderRiser storage frames
...the complete Riser Management System.
Riser Spider
Oiltech’s spider sits on the rotary and supports the riserstring during operations. The sixdogs are lowered manually.
Riser Gantry Crane manufactured in Singapore for Aban being lifted on tothe rig.
14
Riser Management - Vertical
Oiltech provides a complete vertical riser handling system includinggantry crane, racking boards and elevating frame.
Riser racking board beingmanufactured in Singapore.
Tubular handling
Oiltech offer a range of products includinggantry cranes, jib arm handling, catwalkmachines, conveyors, grab lift, magneticlift, ....whatever you require.
15
OilTech Group Limited, Head OfficeThe Chapel, Wyke Old LaneBrighouse, West Yorkshire, HD6 4EA, UK
Tel: 00 44 1484 401570Fax: 00 44 1484 713214email: [email protected]
That is the Oiltech way....keep things simple and reliable.
TEMS Barge, View: Aft
Repair Facility, UK Repair Facility, UK Build Facility, UK
In our facilities we have designed full topsides for land application, JackUp Drilling Rigs, Semisubmersibles and Drillships. These systems can befully automated, fully mechanised or designed to a budget. If the clientwishes we can build, test and assemble the product.
We also refurbish and upgrade mechanical handling equipment, not onlyour own equipment but those of competitors.
TEMS The Tems concept was developed by the Oiltech team in 2008.It is a means of supplying an offshore drilling vessel for milder climatesand gentler sea conditions, while at the same time focusing on fullmechanisation of tubular handling..... one for the future.
www.oiltech-group.co.uk