Oil & Gas Catalogue [2019]€¦ · Field programmable for latched, momentary, or safety latched...

Oil & Gas Catalogue[2019]

www.maxquip.ca | 1.866.629.7847

TELE

MET

RY &

CO

NTRO

L

WWW.MAXQUIP.CA • WINNIPEG 1.844.278.5771 OAKVILLE 1.800.801.8512 • MONTREAL 1.877.629.7847

85

Base Shutdown ASKW SeriesASKW “D” SERIESFUEL DELIVERY TRUCK RADIO REMOTE CONTROLS

Developed specifically for fuel delivery truck applications requiring intrinsically safe, explosion proof handhelds. One to eight remote control functions available with rugged, waterproof, cast aluminum handheld. Typical applications include: PTO, THROTTLE, HOSE REEL, QUERY, and EMERGENCY STOP or any other chassis/tank operation.

Systems are available to connect with all types of truck engine and chassis controls and quick-connect wire harness can be ordered as a “factory” installed OEM option in many new truck chassis allowing “plug and play” installation.

Field programmable for latched, momentary, or safety latched operation. 300 hour continuous transmission with flashing low battery indicator. External receiver “learn” button allows easy transmitter replacement.

Optional pre-wired solenoids are available for pneumatic, hydraulic, or electric control interface as required. Modular components allow for easyinstallation and field replacement. Systems can be specified for Fisher or Rego internal valves, Hannay or Reelcraft hose reels, Muncie or Chelsea PTO’s,and any type of truck engine.

System complies with DOT HM225A requirements for “off truck remote controls” and is available with “Query” option for 5-minute auto shut off after 30second alarm (for LPG tank trucks larger than 3500 USG).Also available with “PTO Delay” feature which automatically opens tank internal valve for 5seconds prior to engaging PTO llowing pump and product lines to charge preventing internal valve slug.

All BASE Engineering products are backed by a 4-year replacement warranty and 24/7 lifetime product technical support.

Part# Description

BAS ASKWD200Q-ECS 2 Button Shutdown System for LPG

Typical 4 Button Remote

HANDHELD TRANSMITTER SPECIFICATIONS

FREQUENCY OF OPERATION 433.92MHz (869, 902-928 and 2.4GHz FHSS available)METHOD OF TRANSMISSION 56 bit DES encryption keyCONSTRUCTION Rugged weatherproof aluminum enclosureANTENNA Externally mounted helicalNORMAL RANGE Up to 1000 feet (higher power available)TEMPERATURE SPCIFICATION -20 F to 185 F (-29C to 85C)BATTERY LIFE 300 hours of continuous use w/flashing Low Battery LED indicatorBATTERY TYPE Common ‘AA’ included (rechargeable transmitter available ASKR)DIAGNOSTICS RF activity LED and Low Battery indicatorFCC APPROVAL # N8KJ8T6J11 (non-licensed)

LOW-POWERED - INTRINSICALLY SAFE FOR USE IN HAZARDOUS ENVIRONMENTS (Class 1, Div 1, Group “D”)

BASE Engineering is a US DOT DCE (design certifying engineering) facility. Our products are built to rigid electricaland mechanical codes and comply with North American and European ROHS lead-free design criteria.BASE Engineering design/builds to specialized OEM requirements.

TRUCK MOUNTED RECEIVER SPECIFICATIONSPOWER SUPPLY 12/24VDC (Optional 120VAC systems available)CURRENT LOAD Up to 4 Amps @ 12VDC per channel or 8 Amps totalCONSTRUCTION IP67 rated, impact resistant polycarbonate (can be mounted externally on machine)ANTENNA Externally mounted to receiver (optional coax and remote mount antenna available)WIRING CONNECTIONS Pre-wired to OEM requirements, quick connect fittings suppliedPROGRAMMING MODES Up to 8 programmable channels including: Latched, Momentary, Safety-Latches, Channel Interlock, Channel Delay, Query (custom OEM programming availabile)DIAGNOSTICS RF activity LED and Power On indicationSERIAL COMMUNICATION Optional digital interface to OEM CAN bus network (ASKR series)

Modular pneumatic solenoids

Hose reelreverser module

Mechanical actuators(air & electric)

Engine kill relaysAir-brake systemarming switch

Extended coax antenna connections

OPTIONAL CONTROL SYSTEM HARDWAREDesigned for quick-connect to ASKWD system and truck chassis

TELEMETRY & CO

NTROL

SURREY 1.855.258.3835 • CALGARY 1.866-629.7847 EDMONTON 1.800.661.7770 • SASKATOON 1.800.667.5886

86

TRANSPORT “PASSIVE” SYSTEMAUTOMATIC LEAK DETECTION

SYSTEM TYPE .......................................... Low powered micro-computer controlledleak detection and shut down system.

INSTALLATION ...................................... “Plug & Play” components (2 hrs)

POWER/GROUND CONNECTIONS ..... 12 volts DC low powered.

SYSTEM ACTIVATION ........................... Air switch brake interlock

LEAK DETECTION METHOD ................ Intrinsically safe pressure transducer

PROBE LOCATION ............................... 1/4" NPT coupling in pump discharge pipe

DETECTION CAPABILITY ..................... Partial and complete hose/pipe separation

RESPONSE TIME ................................. One half (.5) seconds

EMERGENCY STOP METHOD ............. Closes any or all tank internal valves (cable or air)

CALIBRATION ...................................... None required

CALIBRATION SELF TEST .................... Included

OPERATOR SET-UP .............................. None required

SELF TEST FEATURE ............................ Included

MANUAL STOP FEATURE .................... Included

POWER OFF ........................................ Automatic with loss of air

CONSTRUCTION ................................. Non-sparking Aluminum-weather proof

WARRANTY .......................................... Two years

FACTORY TECH SUPPORT .................. Included

WEIGHT ..................................................10.5 lbs

TECHNICAL SPECIFICATIONS

STOP GO

GO

STOP

An automatic leak detection and shut down system designed by

professional engineers specifically for LPG and Anhydrous

Ammonia bulk transfer. Intrinsically safe unit continually monitors

the offloading process for "rate of change" parameters signifying

broken or damaged hoses, fittings and piping. A leak is instantly

detected and stopped by the closure of the tank internal valve(s).

The truck’s engine can also be stopped and PTO disengaged if

desired. This system automatically activates at the end of each

load. This ensures that the system is fully operational and helps

reduce the possibility of a damaged cargo pump due to product

run out. This unit also "fails safe" and closes the internal valve

with a loss of power or the release of the trailer parking brakes.

An optional "Attendance Timer" is available. This query feature

stops the offloading process if the operator fails to press the

"GO" button within a five minute window. A 30 second warning

will sound followed by delivery shut down. This feature helps

ensure operator attendance during the loading/offloading process.

SYSTEM OVERVIEW

Base Passive Leak Detection SystemModel # LDS 100An automatic leak detection and shut down system designed by professional engineers specifically for LPG and Anhydrous Ammonia bulk transfer. The low powered unit continually monitors the off-loading process for “rate of change” parameters signifying broken or damaged hoses, fittings and piping. A leak is instantly detected and stopped by the closure of the tank internal valve(s). The truck’s engine can also be stopped and PTO disengaged if desired. This system automatically activates at the end of each load. This ensures that the system is fully operational and helps reduce the possibility of a damaged cargo pump due to product run out. This unit also “fails safe” and closes the internal valve with a loss of power or the release of the trailer parking brakes.

An optional “Attendance Timer” is available - see details below.

LDS100 TECHNICAL SPECIFICATIONS SYSTEM TYPE Low powered micro-computer controlled leak detection and shut down system.POWER/GROUND CONNECTIONS 12 volts DC low powered.SYSTEM ACTIVATION Air switch brake interlockLEAK DETECTION METHOD Intrinsically safe pressure transducerPROBE LOCATION 1/4” NPT coupling in pump discharge pipeDETECTION CAPABILITY Partial and complete hose/pipe separationRESPONSE TIME One half (.5) secondsEMERGENCY STOP METHOD Closes any or all tank internal valves (cable or air)CALIBRATION None requiredCALIBRATION SELF TEST IncludedOPERATOR SET-UP None requiredSELF TEST FEATURE IncludedMANUAL STOP FEATURE IncludedPOWER OFF Automatic with loss of airCONSTRUCTION Non-sparking fiberglass weather proofWEIGHT 10.5 lbs

Part# Description

BAS LDS100A Passive Shutdown

Model # LDS 200AQRFDesigned to comply with DOT requirements for transports with both ‘metered’ and ‘bulk’ discharge capability.

Combines all of the features described above for the LDS100 but includes a handheld with remote control ‘Query’ and ‘Emergency Stop’ buttons. An audible alarm sounds every 4:30 seconds giving the operator 30 seconds to respond by pushing the ‘Query’ button. Failure to push the ‘Query’ button results in automatic activation of the passive shut-down system. Pushing the ‘Query’ button refills the timer to allow 5 more minutes of off-loading. Additionally, the remote ‘E-Stop’ button gives the operator the ability to activate the passive shut down at any time during the off-loading process.

TELE

MET

RY &

CO

NTRO

L


87

Base Wireless Bulk Plant E-STOP SystemDesigned specifically for Mobile LPG Dispenser and Stationary LPG Fueling Facilities by the world leading experts in Hazardous Location WirelessEmergency Stop Systems.

Eliminates expensive explosion-proof hard wiring and conduit. Handheld Transmitters are ATEX and IECEx approved for use in Zone 0, Class 1, Div 1, Group “D” Hazardous Environments.

Compact Handheld Emergency Stop transmitter unit is worn by attendant and can be used at any time to remotely shut off LPG pumping and electrical systems from within a 1000ft radius.

Fixed Mounted Emergency Stop transmitter units can be strategically located on or near LPG transfer equipment within a 1000ft radius.Systems can be configured to work with any combination of fixed mounted wireless E-Stop switches and portable hand-held E-Stop switches.

These wireless Emergency Stop systems will work in conjunction with all existing, hard-wired, manual E-Stop switches and safety controls.

With optional TRUCK mounted receiver, attendant is also able to shut down LPG delivery trucks. If problem occurs during product transfer, tanker valvesand motive power can be shut down remotely.

REMOTE EMERGENCY STOP SWITCH SPECIFICATIONSMODEL ASK SeriesFREQUENCY OF OPERATION 433.92MHzMETHOD OF TRANSMISSION 56 bit DES encryption keyCONSTRUCTION Rugged weatherproof polymer and aluminum enclosureANTENNA External Rubber FlexNORMAL RANGE 1000ft (300m)HIGH POWERED SIGNAL OPTION Up to 2 MilesTEMPERATURE SPECIFICATION Minus 20 F to 185 FBATTERY LIFE 300 hours of continuous useBATTERY TYPE Common ‘AA’ includedDIAGNOSTICS RF activity LED and Low Battery indicatorFCC APPROVAL # N8KJ8T6J11 (non-licensed)

RECEIVER/CONTROLLER SPECIFICATIONSFREQUENCY 433.92MHzPOWER SUPPLY. 120/240VAC or 12/24VDCRECEIVER OUTPUT MAX LOAD Up to 24AmpsRECEIVER OUTPUT TYPE 24Amp Dry Contact RelayCONSTRUCTION Rugged weatherproof polymer enclosureANTENNA External antenna/coax includedWIRING CONNECTIONS Pre-wired to meet customer requirementsSERIAL COMMUNICATION Optional J1939 CAN bus/RS232 interface to OEMserial networksTOTAL SYSTEM WEIGHT 10lbsROHS LEAD-FREE Compliant

Operator can Shutdown any LPG Equipment fitted with BASE E-Stop hardware

Combine with Centeron Monitors for Alert Notifications and Historical Test Log

TELEMETRY & CO

NTROL


88

Base ProControl 3Integrated Fuel Delivery SystemThe ProControl3 is a newly engineered hand-held control center – is the first and only all-in-one handheld solution for the industry.Designed specifically for the fuel industry by the company with over 90,000 systems on fuel trucks around the world, this all-in-one controller can great-ly improve delivery efficiency and reduce costly fueling mistakes. This patented system is easily retrofitted to existing trucks or installed on newvehicles.

FEATURES:

• Internal GPS for accurate customer tank location capture• Preset delivery volume before you pump, from the end of the hose• Alpha/Numeric keypad for enhanced hose-end data entry and invoicing (requires on-board computer for invoicing)• Communicates with multiple meters simultaneously• Operator control of up to 12 custom remote functions and custom delivery screens specific to your operations• Able to select up to 15 different products or compartments from display, in addition to the existing 12 functions of the handheld• Perform pre-trip truck inspections and produce printed report (requires onboard computer interface)• Hose-end product selection: allows the operator complete end-of-hose control of the electronic register’s product selection functionality, paving the way for automatic compartment selection/fluid routing through preselected meters• System status indicators including PTO and Register state, and real-time volume identification• Brilliant 3.5” color screen for direct sunlight and nighttime reading• In-cab charging cradle with interlock to prevent drive away without remote• Shock and weatherproof IP67 design• Radio signal strength and low battery indicator• Vibration and audible buzzer feedback and messaging• Explosion-proof

8.66"

5.39" 7.00"

3.5"

7.9"

5.52"

4.13"

LED 2

LED 1

ProControl3 HAnDHElD SPECIFICAtIonS

SCREEN ................................................................ 3.5” color LCD, 240 X 320 (QVGA)FREQUENCY OF OPERATION ................... 2.4GHz DSS or 900MHz FHSTRANSMITTER POWER ................................. Up to 60mWMETHOD OF TRANSMISSION .................... 56 bit DES encryption keyANTENNA .......................................................... Internal (no visible antenna to damage)NOMINAL RANGE .......................................... 1000ft (300m)FCC APPROVAL # ............................................ OUR-XBEEPROCONSTRUCTION ............................................ Designed to IP67 and explosion-proof standardsTEMPERATURE SPECIFICATION ................ Minus 20°F to 125°FBATTERY LIFE ..................................................... Up to 12 hours of continuous transmission,

with low battery indicatorBATTERY TYPE .................................................. Rechargeable Lithium Ion supplied with

12/24VDC charging cradleROHS LEAD-FREE COMPLIANT FCC approved system meets US and Canadian DOT requirements for “Off Truck” remote controls.

BASEstation HUB SPECIFICAtIonS

FREQUENCY OF OPERATION ................... WiFi: Dual frequency 2.4GHz/5GHzGPS: 1575.42MHz with PC3 RX: 2.4GHz

POWER SUPPLY ................................................ 12/24VDC CURRENT LOAD ............................................. Up to 3A without RX power.

Up to 13A with PC3 RX.CONSTRUCTION ............................................ Dust-proof plastic enclosure

(water-proof on request)ANTENNA .......................................................... External combo antenna includedWIRING CONNECTIONS ............................ Pre-wired to meet customer requirements,

quick connect fittings suppliedTOTAL SYSTEM WEIGHT ............................... 2.2 lb, 4.2 lb with PC3 RX

BASEstation ANDROID tABlEt SPECIFICAtIonS

FREQUENCY OF OPERATION ................... WiFi: Dual frequency 2.4GHz/5GHzGPS: 1575.42MHz

POWER SUPPLY ................................................ 5V USBCURRENT LOAD ............................................. 1.5A when chargingCONSTRUCTION ............................................ Rugged 7” IP68 water-proof Android tabletANTENNA .......................................................... Internal antennaWIRING CONNECTIONS ............................ USB charging cable includedTOTAL SYSTEM WEIGHT ............................... 1.25 lbROHS LEAD-FREE COMPLIANT

ProcontroL3

With rfid oPtion

ProControl Transmitter

ProControl3 in-cab or Office Docking Cradle

TELE

MET

RY &

CO

NTRO

L


89

Base StationTruck -mounted On-Board ComputerTaking a step beyond the capabilities of a stand-alone ProControl3 system, at the center of BASE’s Automation platform, the BASEstation HUB does all of the heavy lifting for the fully automated truck. The HUB communicates with the ProControl3, the chassis, the tank, the pumps, the valves, and the engine to get a thorough understanding of what’s happening on the truck. All data collected and stored in the HUB can be transmitted real-time to the back office through a variety of methods including cellular, WiFi, and USB sticks.

WITH THE BASEstation HUB, THE ProControl3 CAN:

• Show customized data entry and display screens, configured to match the “day in the life” of a truck driver• Perform, record, print DOT pre-trip truck inspections with handheld• Captures and displays inventory levels on truck - both initial loading and post delivery• Displays optimized customer delivery list, will calls, and remaining deliveries• Built-in GPS brings up customer account details automatically when in proximity• Search by customer name, location or address, or use the built-in RFID scanner (also designed for barcode or iButton) to pull up detailed account

information to scan, pump, and invoice automatically• Preset by price or volume• Flow rate readout• In addition to the register’s Weights & Measures block, system prints customer invoice details• Sell additional items on same ticket• Account for non-metered transactions, such as miscellaneous charges and packaged goods• Produces detailed ‘end of shift’ reconciliation report

BASEstation HUB Truck Interface Features:• Mounts in-cab like standard BASE receivers• Two-way data communication to back office using our secure and 99.99% uptime Cloud service or directly using our cellular, WiFi, or USB

connections• Maintains detailed customer database, optimized route• Sends, receives, updates, and stores delivery data until signal available or USB download• Connects to any electronic register and integrates with register manufacturer file formats• I/O to connect to in-cab printers, truck guages, tank values, PTO, hose reel, engine, and other accessories• Connects via Wi-Fi to optional rugged BASEstation Android tablet mounted in cab

Optional BASEstation Android Tablet also available.

BASE ENGINEERING INC. 600 Rothesay Ave • Saint John, New Brunswick • Canada • E2H 2H1 • BASEng.comNorth America Toll Free 1.800.924.1010 • International 01.506.635.2280 • Fax 506.635.2281 • eMail [email protected]

WItH tHE BASEstation HUB, tHE ProControl3 CAn:

• Show customized data entry and display screens, configured to match the “day in the life” of a truck driver• Perform, record, print DOT pre-trip truck inspections with handheld• Captures and displays inventory levels on truck - both initial loading and post delivery• Displays optimized customer delivery list, will calls, and remaining deliveries• Built-in GPS brings up customer account details automatically when in proximity• Search by customer name, location or address, or use the built-in RFID scanner (also designed for barcode or

iButton) to pull up detailed account information to scan, pump, and invoice automatically• Preset by price or volume• Flow rate readout• In addition to the register’s Weights & Measures block, system prints customer invoice details• Sell additional items on same ticket• Account for non-metered transactions, such as miscellaneous charges and packaged goods• Produces detailed ‘end of shift’ reconciliation report

BASEstation HUB truck Interface Features:

• Mounts in-cab like standard BASE receivers• Two-way data communication to back office using our secure and 99.99% uptime Cloud service or directly using

our cellular, WiFi, or USB connections• Maintains detailed customer database, optimized route• Sends, receives, updates, and stores delivery data until signal available or USB download• Connects to any electronic register and integrates with register manufacturer file formats• I/O to connect to in-cab printers, truck guages, tank values, PTO, hose reel, engine, and other accessories• Connects via Wi-Fi to optional rugged BASEstation Android tablet mounted in cab

Taking a step beyond the capabilities of a stand-alone ProControl3 system, at the center of BASE’s Automation platform, the BASEstation HUB does all of the heavy lifting for the fully automated truck. The HUB communicates with the ProControl3, the chassis, the tank, the pumps, the valves, and the engine to get a thorough understanding of what’s happening on the truck. All data collected and stored in the HUB can be transmitted real-time to the back office through a variety of methods including cellular, WiFi, and USB sticks.

bAsestationtrUcK-moUnted

on-boArd comPUter

TELEMETRY & CO

NTROL


90

Centeron Telemetry Accessories

Part# Description

CEN DG0001-Y Centeron Cellular Div 2 Propane/NH3 Monitor

CEN DG0001-Y-IS

CEN GSHB10AROC 5AACS02783

CEN GSHB10AROC 5AADS02783

CEN GSHB10AROC 5ABNS02870CEN GSHB10A

ROC 5ABPS02906

ROC 5986S02733 ROC 5909S02733 ROC 5987S02787

3G/4G HSPA/GSM Cellular Propane MonitorThe Centeron Cellular Propane Monitors take remote monitoring to the next level at a price you can afford. They are battery powered and magnetically mounted to the tank so installation is quick and easy. You can remotely set their reporting schedule and level alarms to suit your application. One monitor fits any application. And they are UL certified for use in hazardouslocations.

Choose either Class I, Division 1, Group D or Class I, Division 2, Group D approved monitors.

The Centeron Cellular Propane Monitors take remote monitoring to the next level at a price you can afford. They are battery powered and magnetically mounted to the tank so installation is quick and easy. Monitors are available with 3G CDMA for U.S. use or 3G GSM for international. Optional GPS on CDMA monitors enables you to put the monitors onto moveable assets so you can not only track inventory levels, but also location. You can remotely set their reporting schedule and level alarms to suit your application. One monitor fits any application. And they are UL certified for use in hazardous locations. Choose either Class I, Division 1, Group D or Class I, Division 2, Group D approved monitors. Centeron: Simply the right choice for your monitoring needs.

FEATURES• Approved for Class I, Division 1, Group D or Class I,

Division 2, Group D hazardous locations• 3G CDMA cellular coverage for U.S. (3G GSM for

international cellular coverage available)• Optional GPS for locating mobile, non-fixed assets

on CDMA monitors• Flexible reporting schedule• E-mail, fax, and text-messaging alerts• Automatic fill and theft detection• Two level set-points• Checks tank level every 10 minutes for set-point

crossing and fill detection• Battery and radio strength indicator

3G CDMA/GSM Cellular Propane Monitor

01Tank monitoring

An ISO 9001-2008 Certified Company

The Centeron System combines robust tank monitoring equipment, market leading OptiFill tank fill optimization software, and Dispatch Compass routing and dispatching software to provide a complete set of tools to dramatically improve the productivity of any liquid distribution business. Our wireless tank monitoring equipment is unmatched in breadth of product, radio strength, and reliability. The system can communicate via cellular or Ethernet to ensure the best solution for any application. OptiFill enables you to unlock the power of your wireless tank monitoring system. This delivery optimization software allows you to achieve maximum fills on every delivery, even difficult multi-tank locations. Dispatch Compass is designed specifically for the liquid distribution business and easily schedules the most efficient routes for any combination of bulk, multi-compartment, packaged goods, or combo trucks. With these powerful tools in place, any fleet will travel fewer miles in less time for less cost than ever before. And with higher levels of efficiency, you can service more customers and generate more profits without adding additional trucks or drivers.

The Centeron System

Cellular Propane Monitor

Accuracy: +/-5% of Full Scale Range

Operating Temperature: -40C to + 0C

Battery Life: 10 years transmitting @ 10 times/month for Class I, Div 1,Group D monitors, or 10 years transmitting @ 30 times/month for Class I, Div 2, Groupd D monitors

Enclosure: NEMA Type 3, 4X and 6P

Mounting Type: Magnetic

Safety Approvals: UL 913 and CAN/CSA-C22.2 No. 157 Class I, Division 1, Group D, or ISA 12.12.01 and CAN/CSA-C22.2 No. 213

Radio Approval: FCC Part 15 approved

Cellular coverage: 3G/4G HSPA/GSM coverage in the U.S., Canada, Mexico, and South America

Technical specifications

FEATURES

• Approved for Class I, Division 1, Group D or Class I, Division 2, Group D hazardous locations• HSPA• Flexible reporting schedule• E-mail, fax, and text-messaging alerts• Automatic fill and theft detection• Two level set-points• Checks tank level every 10 minutes for set-point crossing and fill detection• Battery and radio strength indicator


TELE

MET

RY &

CO

NTRO

L


91

Part# Description

CEN DP111N-Y Centeron Cellular Div 2 Pressure Monitor <11ft

CEN DP231N-Y Centeron Cellular Div 2 Radar Monitor 18-23ft



Part# Description

CEN DR0960-Y Centeron Cellular Div 2 Radar Monitor 8ft




Call Maxquip for additional sizes and options!

3G/4G HSPA/GSM Cellular Radar Monitor

3G/4G HSPA/GSM Cellular Pressure Monitor

The Centeron Cellular Radar Monitor is rated for both non-IS and IS applications. It is UL and CAN/CSA certified so you can be sure it’s safe to use in demanding environments. Like other Centeron products, its ease of installation, longbattery life, and rugged enclosure assure a long life of excellent performance. Also available for DEF.

FEATURES• Now available for 20 ft tank heights!• Intrinsically safe and non-intrinsically safe models• Flexible reporting schedule• Checks tank level every 10 minsfor set-point crossing and fill detection• Stores and reports level for midnight reading• Low- and high-level alarms• Two level set-points• E-mail, fax, and text-messaging alerts• Automatic fill and theft detection• Battery and radio strength indicator

The Centeron Cellular Radar Monitor is rated for both non-IS and IS applications. It is UL and CAN/CSA certified so you can be sure it’s safe to use in demanding environments. Monitors are available with 3G CDMA for U.S. use or 3G GSM for international. The CDMA monitor has optional GPS capability, perfect for locating the asset being monitored. Like other Centeron products, its ease of installation, long battery life, and rugged enclosure assure a long life of excellent performance.Centeron: Simply the right choice for your monitoring needs.

FEATURES• Now available for 20 ft tank heights!• Intrinsically safe and non-intrinsically safe models• 3G CDMA cellular coverage for U.S. (3G GSM for


on CDMA monitors• Flexible reporting schedule• Checks tank level every 10 minutes for set-point

crossing and fill detection• Stores and reports level for midnight reading• Low- and high-level alarms• Two level set-points• E-mail, fax, and text-messaging alerts• Automatic fill and theft detection• Battery and radio strength indicator

3G CDMA/GSM Cellular Radar Monitor

01Tank monitoring



The Centeron System

Cellular Radar Monitor

Tank Depth: Up to 20 ft

Accuracy: ±0.5%

Operating Temperature: -40C to + 0C

Battery Life: 5+ years @ 1 report per day


Mounting Threads: 1½” and 2” NPT



Cellular coverage: 3G/4G HSPA/GSM coverage in the U.S., Canada, Mexico, and South America

Technical specificationsTECHNICAL SPECIFICATIONS

Call Maxquip for additional sizes and options!

The Centeron Cellular Pressure Monitor is now rated intrinsically safe and is approved for use in flammable liquids. It is UL and CAN/CSA certified so you can be sure it’s safe to use in demanding environments. The CDMA monitor has optional GPS capability, perfect for locating the asset being monitored. Like other Centeron products, its ease of installation, long battery life, and rugged enclosure assures a long life of excellent performance.

FEATURES• Intrinsically safe and non-intrinsically safe models• Flexible reporting schedule• Checks tank level every 10 minsfor set-point crossing and fill detection• Stores and reports level for midnight reading• Low- and high-level alarms• Two level set-points• E-mail, fax, and text-messaging alerts• Automatic fill and theft detection• Battery and radio strength indicator

The Centeron Cellular Pressure Monitor is now rated intrinsically safe and is approved for use in flammable liquids. It is UL and CAN/CSA certified so you can be sure it’s safe to use in demanding environments. Monitors are available with 3G CDMA for U.S. use or 3G GSM for international. The CDMA monitor has optional GPS capability, perfect for locating the asset being monitored. Like other Centeron products, its ease of installation, long battery life, and rugged enclosure assures a long life of excellent performance.

FEATURES• Intrinsically safe and non-intrinsically safe option• 3G CDMA cellular coverage for U.S. (3G GSM for


on CDMA monitors• Flexible reporting schedule• Checks tank level every 10 minutes for set-point

crossing and fill detection• Stores and reports level for midnight reading• Low- and high-level alarms• E-mail, fax, and text-messaging alerts• Automatic fill and theft detection• Battery and radio strength indicator

3G CDMA/GSM Cellular Pressure Monitor

01Tank monitoring



The Centeron System

Cellular Pressure Monitor

Tank Depth: up to 60 ft

Accuracy: +/-1% of Full Scale Range

Operating Temperature: -40C to +60C in non-freezing media



Mounting Threads: 1½” and 2” NPT



Cellular Coverage: 3G/4G HSPA/GSM coverage in the U.S., Canada, Mexico, and South America

Technical specificationsTECHNICAL SPECIFICATIONS

TELEMETRY & CO

NTROL


92

Centeron Encompass RF MonitorsCenteron Encompass has four types of tank level monitors to choose from — Propane, Radar, Float, and Pressure monitors. Tanks from 9 in to over 50 ft deep can be monitored. All monitors have UL 913 and CAN/CSA C22.2 No. 157 certifications for use in Class I, Division 1, Group D hazardous locations.

*NEW* Encompass monitors feature a new protocol which has built-in features to improve wireless network performance. Monitors detect set-pointcrossings quicker and support new “poll now” feature that can allow you to check tank levels in real time. They are also now over the air upgradeable, soas new features are added to the Centeron Encompass system your devices can be updated.

Each monitor features easy installation, a rugged enclosure, and long battery life to deliver excellent performance. Level set-points, alarms, andschedules can be set in Centeron WebView and passed down to the monitors. Centeron Encompass — simply the right choice for your monitoring needs.

Propane MonitorCEN G4GM

Radar MonitorCEN G4RM

Float MonitorCEN G4GMD

Pressure MonitorCEN G4PM

FEATURES• Approved for use in flammable liquids• Flexible reporting schedule• End of month reports• Alarming• E-mail, fax, and text-message alerts• Automatic fill detection• Battery strength indicator

02

Pressure Radar Float Propane

Accuracy +/- 1% +/- 0.5% +/- 5% +/- 5%

Battery Life EITHER 5 year battery life with 10 minute transmit interval OR 10 year battery life with 1 hour transmit interval

Max Tank Depth 50 ft. 20 ft. 10 ft.

Enclosure NEMA 4 Enclosure UL 50 Type 3 UL 50 Type 3 UL 50 Type 3

Mounting 1 ½” & 2” NPT 1 ½” & 2” NPT Magnetic Magnetic

Operating Temperature -40C to +80

*in non-freezing fluid-40C to +60

Radio Range 1 mile line of sight, 500 feet obstructed

Radio Approval FCC Part 15 approved

Safety Approvals ETL/cETL Listed: Intrinsically safe for use in Class 1, Division 1, Group D hazardous locations


©20

15 S

chne

ider

Ele

ctric

. All

right

s re

serv

ed.

June 2015

Schneider Electric USA, Inc. 1602 Mustang Drive, Maryville, TN 37801 Telephone: +1 865 981 3100 www.schneider-electric.com/us

Centeron Encompass RF MonitorsTank monitoring

THE CENTERON SYSTEMThe Centeron System combines robust tank monitoring equipment, market leading OptiFill tank fill optimization software, and Dispatch Compass routing and dispatching software to provide a complete set of tools to dramatically improve the productivity of any liquid distribution business.

Our wireless tank monitoring equipment is unmatched in breadth of product, radio strength, and reliability. The system can communicate via cellular or Ethernet to ensure the best solution for any application.

OptiFill enables you to unlock the power of your wireless tank monitoring system. This delivery optimization software allows you to achieve maximum fills on every delivery, even difficult multi-tank locations.

Dispatch Compass is designed specifically for the liquid distribution business and easily schedules the most efficient routes for any combination of bulk, multi-compartment, packaged goods, or combo trucks.

With these powerful tools in place, any fleet will travel fewer miles in less time for less cost than ever before. And with higher levels of efficiency, you can service more customers and generate more profits without adding additional trucks or drivers.


TELE

MET

RY &

CO

NTRO

L


93

CEN CGW-1-E-D

CEN CGW-0-E-D

Centeron Encompass Ethernet GatewayThe Centeron Encompass Ethernet Gateway receives tank level information from Centeron Encompass RF monitors and transmits the data to Centeron’s WebView Data Center using any Ethernet-based network. Newly added features include “POLL NOW” for instant level data on WebView. The Encompass Ethernet Gateway is an excellent choice for anyone needing up-to-date level information at any time.

Our wireless tank monitoring equipment is unmatched in breadth of product, radio strength, and reliability. The system can communicate via cellular or Ethernet to ensure the best solution for any application.

With these powerful tools in place, any fleet will travel fewer miles in less time for less cost than ever before. And with higher levels of efficiency, you can service more customers and generate more profits without adding additional trucks or drivers.

FEATURES• For use with Encompass RF monitors only • *NEW* Scheduled or “POLL NOW” level data • *NEW* RF Signal strength indicators for each monitor• *NEW* Remotely set-up and revise report schedule and alarms; now supports automatic fill detection!• *NEW* Remotely upgradeable, so when new features are added to Encompass system your existing device can be updated• *NEW* Status lights assist all aspects of installation• Supports up to 40 Centeron Encompass monitors• Two level setpoint alarms for each tank• Secure data transmissions• Automatic power fail recovery


TELEMETRY & CO

NTROL


94

Bringing you accurate tank informationanytime and anywhere!

powered bya product of

for more information, contact us:

WWW.MAXQUIP.CACALL 1-866-629-7847 or94

TELE

MET

RY &

CO

NTRO

L


95

Centeron LevelTrack Radar MonitorThe Centeron LevelTrack Radar Monitor is rated for applications requiring ATEX approval, so you can be sure it’s safe to use in demanding environments.The Centeron LevelTrack monitor is paired with a BLE satellite communication device providing global communication capability. With this globalcapability, the solution is perfect for locating the asset being monitored. Like other Schneider Electric products, its ease of installation, long battery life, and rugged enclosure assure a long life of excellent performance.

FEATURES• Available for tank heights 16 feet or less• IECEx and ATEX certifi cation• Satellite communication using BLE interface• Global solution for locating mobile, non-fi xed assets• Confi gurable reporting schedule• Two level set-points• Email, fax, and text messaging alerts• Automatic fi ll detection• Battery strength indicator

LevelTrack Radar Monitor

Tank Depth: up to ft.

Accuracy ±0.5%

Operating Temperature: - °C to + °C


Enclosure: Meets NEMA Type 4

Mounting Threads: 2” NPT

Safety Approvals: Intrinsically safe for Class 1, Div 1 application


Coverage: Global satellite


4G LTE/HSPA Residential Cellular Tank MonitorThe Schneider Electric System combines robust tank monitoring equipment, market leading Centeron Webview Data Centre to provide a complete set of tools to dramatically improve the productivity of any fl uid distribution business. Centeron’s new tank monitoring equipment is unmatched in radio strength and reliability. The system communicates via LTE or HSPA technology. With this combination in place, any fl eet will travel fewer miles in less time for less cost than ever before, with higher levels of effi ciency. You can service more customers and generate more profi ts without adding additional trucks or drivers. The Centeron Cellular Tank Monitor takes remote monitoring to the next level at a price you can aff ord. One monitor fi ts any applica-tion. Centeron Monitors are UL certifi ed for use in hazardous locations. Monitors are Class I, Division 2, Group D approved.

FEATURES:• Approved for Class I, Division 2, Group D use in hazardous locations • 4G LTE/HSPA cellular coverage for U.S. and international coverage • MaaS program available for 4G cellular propane monitors o No capital investment o Minimal monthly fee o Five year warranty included in MaaS program• Accuracy +/- 3% • E-mail and text-messaging alerts• Automatic fi ll detection • Flexible reporting schedule• Battery and radio strength indicator

TELEMETRY & CO

NTROL


96

Centeron WebViewEnhanced tank monitoring With Centeron WebView, you can easily monitor your tanks, reviewing both current and historical tank fill-level and usage information. It can also help you to track your progress towards improved inventory forecasting and a more efficient delivery process.Eliminate run outs and ensure smarter delivery schedules with Centeron WebView’s detailed graphical and tabular reports, as well as active text, email, or fax alerts — keeping you and your team proactively on top of changing tank levels. A device health alert can help you ensure the soundness of your solution, and map view capabilities allow you to track tank locations on GPS-enabled monitors.Boosting efficiencies Our Centeron-branded monitoring devices connect through Centeron WebView via cellular, ethernet, or satellite connection, allowing you to track tank levels and letting you know exactly when and where to make your deliveries. This targeted information can eliminate inefficient partial fills, stressful emergency deliveries, and costly run outs — which can improve your logistics productivity and minimize unplanned expenses.Supporting growth By increasing your level of efficiency, you can expand your business and customer base — without needing to add more resources. Centeron WebView helps you better manage the customers you already have, allowing you to do more while keeping costs in check.Improve team performance Centeron WebView’s tools can help your managers easily evaluate and track your delivery team’s performance over time. They can quickly comparevarious performance measurements and reports to verify, analyze, and maximize savings and efficiencies — giving you a higher return on your investment.High-level security Its flexible, password-protected Web-based user interface allows for secure organization, customer, and tank hierarchy set-ups. You can customize your Centeron WebView with specific user authorization levels, from read-only to full system administration. And our fully redundant data center ensures reliable, uninterrupted service.Easy set-up Centeron WebView provides simple set-up capabilities that offer numerous benefits. With it you can:

• Save time with its simple, easy-to-use tank monitor set-up processes• Get data when you need it by taking advantage of its flexible tank reporting scheduling features• Customize data visibility with secure, multi-user access for employees, customers, and suppliers —anyone you want to have access your tank data• Avoid outages and minimize emergencies by choosing your preferred tank-level alerts• Easily monitor device health with customized color-coded tank status indicators

CONFIGURATION SOFTWARE

SMARTONE C SETUP INCLUDES

SmartOneTM CSatellite-Managed Asset-Ready Tracker

Designed for the intelligent management of fixed and mobile assets, the SmartOne C is a practical solution for a multitude of options including:

Globalstar.com/Simplex

FEATURES BENEFITS

constantlylosing trackof your assets?

In the farming industry?The SmartOne C is perfect for nurse wagons, trailers, machinery,and other portable or stationary farm equipment!

In addition to monitors for the farm industry, did you know thatwe have an entire catalogue full of NH3 Application Equipmentand Parts?!

Maxquip is a leading supplier of NH3 Application Equipment!Contact us today for a copy of our catalogue.

Oil & Gas Catalogue [2019]€¦ · Field programmable for latched, momentary, or safety latched...

Documents

Transcript of Oil & Gas Catalogue [2019]€¦ · Field programmable for latched, momentary, or safety latched...