ORIENT FLIGHTS P LTDAMO

Approved Under CAR 145

Approval

Approved by DDG office Chennai Vide letter No. F/OFPL/151 dated 2/02/2009

Class –Aircraft Rating- A2-Aeroplane 5700 Kg and below Limitation – 1. Cessna 152 2. Cessna 172 3. Cirrus SR22

approval

Class – component Rating –C5 Limitation – 12V/24V Gill Lead Acid

battery Location - Chennai

Approval Schedule

Approval Schedule

Validity

ORGANISATION CHART

AM

MM

PP TECH LS Maint

QM

QUALITY

INSPECTOR

QUALITYENGINEER

Post Holder

Mr. Anand Jacob Verghese MD Accountable Manager director@orientflights.com

Mr. J S Sidhu Dy GM Maintenance Manager mm@orientflights.com Mr. S P Singh Chief Engineer Quality Manager qc.orientflights.com

Role of Accountable Manager

Establish and promote the safety and quality policy

Ensure necessary resources such as finance, Infrastructure, facilities, tools, equipment, Manpower and literature Nominate senior persons for monitoring the quality system.

  Ensure that all personnel are appropriately trained and qualified to accomplish the work.

Role – Quality manager

Administrate an independent quality system

Responsible to Accountable Manager on quality and safety matters

Auditing the quality system includes requesting remedial action

Planning & implementation of a program of the quality procedures and product

Issue / renewal / withdraw of staff certifying authorization.

Role – Quality Manager

Approval of maintenance instructions created from approved data.

Ensure compliance of all mandatory requirements and technical standards of the Airworthiness Authority within stipulated time

Role – Maintenance Manager

MM is responsible for ensuring that all maintenance required to be carried out

responsible for any corrective action resulting from the quality compliance monitoring

Implement of remedial action Defining the initial and continuous

training program

Role – Maintenance Manager

Defining the facilities and associated means required and adapted to the scope of activities.

  Coordinating for procurements, stocking, issue of parts and materials. To lay down procedures for periodic review of stores materials and parts and observance of components shelf life

Role - AME

Carry out the inspection and certify the same

Supervise the work being done by the technicians

Keep up-to-date knowledge about technical requirement and instructions issued from time to time

Department

Depertment In-Charge Work

Planning Mr. Prasanna R Work order,scheduling

Technical Services Mr. Sarvana Singh ARC ,AMOS,

Store Mr. Rasool Khan Main, line , oil & lubricant store

Quality Audit Mr. E Rajendran Audit, admin

Training & Safety Mr. Muthu Krishanan a/c file, cs file

Planning Manager

responsible for providing short and long term plans for compliance of all maintenance requirement

develop plans to schedule aircraft, engine, major components for maintenance and modifications

ensure that necessary tools, equipment and spares are available in serviceable condition

Planning manager

fore cast and recommends man power, spares and engineering equipments required for line/ base maintenance and workshop.

responsible to undertake the necessary corrective and preventive action resulting from Quality compliance monitoring and audit programme

Technical Services

ensuring that technical literature/ publications are revised and kept up to date

Manage the AMOS Prepare the document for ARC Maintain aircraft file