OFFICE OF THE DIRECTOR, AYURVEDIC & UNANI SERVICES,3/23 SHASTRI NAGAR DEHRADUN UTTARAKHAND

TENDER FORM For Equipments

(TECHNICAL BID) ORIGINAL/DUPLICATE Tender No: Date Time Last Date of receipt of tender Date: 09 June 2011 Time 3.00 PM Date of opening of Tender Date: 13 June 2011 Time 4.00 PM Earnest money: -

QUOTATION 1- I/We hereby quote to supply the Furniture/ machine/equipments under written schedule in the manner and within the time specified as set forth

in the instruction to tenderers and conditions of agreement enclosed herewith at the rates given in the schedule below.

Draft/NSC/FDR No. Date Amount

I/We hereby agree that in the event of tender being accepted the condions of the enclosed agreement and those contained in the acceptance letter will be binding upon me/us and will along with the quotation, be converted into and shall be deemed to be a completed agreement between me/us and the Governor of Uttrakhand from the date of issue of acceptance letter I/We hereby further agree that if so required by the Director Ayurvedic & Unani Service Uttrakhand, Dehradun. I/We shall execute a formal agreement deed as approved by the Government conveyance Uttrakhand within the time specified by the Director General AYUSH and while according his approval the Government Conveyaneer (means one who is responsible for transference of properties etc.) may in his discretion make any amendments which shall be final and binding on the successful tenderer.

2- I/We herewith deposit a sum 100000.00( Rupees One lakh only) duly pledged to the Director General AYUSH Uttrakhand Dehradun in the shape of Demand Draft/NSC/Fixed Deposit Certificate.

3- IncaseI/We fail to execute formal deed of agreement if so required by the Director General AYUSH Uttarakhand Dehradun on behalf of the Government of Uttrakhand and deposit the security as laid down in the instruction to tenderers with ten days of the acceptance of my/our tender, I/We herby agree that apart from my/our liability under the agreement the above sum of earnest money will be forfeited to the Governor.

4- Firstly technical bids would be opened in the presence of bidders or their representatives who choose to attend on the date, time and the place specified. After technical evaluation and ranking list of technically qualified bidders would be prepared. Envelopes of Financial bids of technically qualified bidders would be opened only and envelopes of other financial bids will not be opened.

Signature

(Name of the Tenderer in Block letters) Seal impression

Check list The tenderers are hereby instructed to arrange the required tender's document as per the check list and must mention the page number’s against each column of the check list. They are requested to put page numbers on each paper submitted with tender.

Page No S.N Name of the Document From To

1 Original Tender Form with Tenchnical & financial bid which should be sealed in seprate envalopers and will be packed in one envolap

2 Formality Sheet 3 CA Certified balance sheets of business with turnover not less than one crore of last 3 (Three) financial years of firm

manufacturing supplying enstalling of equipments.

4 Earnest Money have to be deposited as per advertisement 5 Copy of valid certificate of registration with trade tax department Uttrakhand or of the state where manufacturers is

located certificate of Direcotr of Industries of Uttarakhand & other states as the case may be .

6 Declaration of not being punished/debarred/black listed by State/Central Government department body 7 No reference of rates be given in technical bid 8 In financial bid schedule of rates etc. are required to be filled as per enclosed Performa separately 9 The contract forms of the manufacturing firm for maintenance for 3 years after warranty period & the term of contract for

training personnel for equipment handling should be enclosed

10 A Certificate that supplier has not supplied the tendered iteams to either Government or any government organization at the lower rate than quoted rate.

11 annual maintenance contract cost for 3 years after installation to be given separely for machine/equipment. 12 A Certificate to the effect that the manufacturer/Supplier shall also take up the exercise to train atleast two number of

personnel if some sophisticated technique is involved in machine /equipment operations.

13 Certificate of authorization by manufacturer in case the tenderer is as person other than manufacturer. 14 Any other document.

Signature of Tenderer

Name Seal

FORMALITIES SHEET Name (of Proprietor/Partner with full residential address) and address together with phone (Fax) Numbers Tenderers Please complete the following information and attach the supporting documents wherever required. The Tenders without necessary supporting documents or with false information are liable to be the rejected. 1- Rate offered as a. manufacturer or manufacturers authorized representative b. Registered supplier of. 2- is the Furniture/machine/equipment of supply is certified by BIS/ISO 9000 Series/any other standardization index/approved by

Director of Industries Uttrakhand/or of the State where the manufacturer is located. Date of grant of approval Date of Validity-------------------

3- The bidder shall give substantial evidence to the effect that the manufacturer is manufacturing the Furniture/machine/equipments as his works for past at least 3 years.

4- Is the manufacturer registered with Trade Tax Department Uttrakhand or at his own state Directorate of Industries department of own

state or Uttrakhand (The clause shall not be applicable to foreign Manufacturer/suppliers). 5- Certificate of Gross Sales turn over of supplying establishment of past three years, Certified by CA, which shall be not less than 1.00

crore per annum. This shall not be applicable for the manufacturing unit of Uttrakhand as per Govt. of Uttrakhand Industries Department Policy).

6- The Tenderer should submit their last three year Sales Tax Clearance Certificates of Manufactorer and also of their business

establishment in the event of supplies being made from there. 7- The manufacturer shall have to give written consent to the effect than they are ready to demonstrate the functions of

Furniture/machine/equipments to the indenter and will train also the indenter’s personnel with the operation of Furniture/ machine/equipment if required in handling and operations of the machine/equipment.

8- The manufacturer shall have to enter into a contract for at least 3 years annual maintenance. The contract for maintenance has to be entered along with acceptance letter of the tender; the value of Annual Maintenance Contract should be explicitly mentioned separately.

9- The firm shall have to give consent to the effect that they shall replace the Furniture/machine/equipments completely in the event of any serious damage to the essential part during transport or handling during installation.

10- A Notarized affidavit has to be enclosed with tender that the supplying manufacturing firm/Seller has not, been

debarred/blacklisted/prosecuted by any State/Central Government agency for any breach of contract or agreed terms of supply. 12- In case the Furniture/machine/equipments is imported from a foreign country then the tenderer will have to submit documents of

custom duty payment/clearance. 13- Rate must be quoted F.O.R. destination for 13 District headquarters of Uttarakhand state at offices of District Ayurvedic & Unani

Officer Uttrakhand for all the items. 14- The technical bid and the financial bid should be sealed by the bider in separately covers/duly subscribed and both those sealed covers

will put in a bigger cover which also be sealed and duly subscribed 15- Within 15 days of receiving letter of acceptance, the successful bidder shall deliver to the Director General AYUSH 3/23 Shastri

Nagar Dehradun (Uttarakhand) the performance security as a bank draft in favour of the Director General AYUSH 3/23 Shastri Nagar Dehradun for an amount equivalent of 5 % of the contract price. The Performance Security shall be valid till the expiry of the period of supply of Furniture/equipments etc.

DECLARATION

I Do herby solemnly affirm that all above information furnished are true and nothing material is concealed.

Signature of Tenderer

Name in Capital letter Office seal

Tender submitted in the Original Financial Bid as per Tender Notice

SCHEDULE DETAIL OF ARTICLES

Nature and description of Furniture/machine/equipment as per enclosed sheet of requirement

Length of contract Up to31 MARCH 2012 & can be extend up to six month

Rate must be quoted strictly as per Performa given below and all the information should be supplied accordingly

SCHEDULE OF RATES

Serial No of Furniture/Machine/equipment as per list enclosed sheet of equipment

Name of Furniture/ machine/equipment with full specification etc.

Name of manufacturing firm

Rate exclusive of all taxes and duties

vett Total cost inclusive of all Taxes and duties for the offered packing unit

Annual maintenance cost with service tax if any

1 2 3 4 5 5 7

Dated: Day of 2011

Signature of tenderer Name in capital letters

Address Name of supplying firm/Manufacture

NB. 1- Please fill in all the above columns 2- Rates quoted in column No 4(must be exclusive of all taxes 3- Rates inclusive of Taxes will not be considered 4- Rates quoted must be mentioned after deduction of all rebates if any rebates mentioned separately shall not be

considered.

SCHEDULE”B”

GENERAL TERMS AND CONDITIONS OF CONTRACT 1- The agreement is to last till----------------------------------but in the event of any breach of the terms and conditions of this agreement at

anytime on the part of the supplier the Director General AYUSH Uttrakhand Drehradun may determine the contract without any compensation to the supplier.

2- The supplier shall supply the goods and material described in column 1 of the schedule of Rates from time to time in such quantities as may be entered in the indents set at the rates set forth in columns 4 and 5 of the schedule of Rates.

3- (a) The rates mentioned in schedules of Rates should be based on safe delivery of Furniture/Machine/equipment in SECURE PACKAGE. (b) The supplier shall bear all risk of loss, leakage or damage during transit of the machine/equipment and shall be liable to deliver the machine /equipment in working condition in such manner as the Purchaser/indenting, officer shall direct.

4- Conditions as to time for performance whether laid down herein or in the indent is the essence of the contract. a. That the manufacturing firm shall have to under take right in the beginning of the acceptance of the tender, they shall train the

personnel for proper functioning of the machine/equipments. b. That the manufacturing firm should mention 3 years annual maintenance contract cost value in their financial bid,

5- The tenderer manufacturing firm shall have to submit the valid certificate of registration of ISO 9000 series or of ISI as per the category of equipment specialty by Director General AYUSH Uttrakhand, Dehradun.

6- The purchaser reserves the right and can inspect the manufacturing, testing operations, process control of quality of machine/equipments to be supplied or has been supplied including the storage and transit conditions of the supply as the same are specifically required for safe delivery of machine/equipment.

7- That in any case of disagreement about the judgment of indenter in returning suppliers an appeal with reasons can be made to the Ayurvedic & Unani Services Uttrakhand Dehradun whose decision on the matter shall be final.

8- The payment to the supplier for the machine/equipment supplied by him shall be made in the following manner:- a. Bills in Triplicate shall be sent by the supplier to the consignee and on receipt of this after verification of quantity condition

and performance of the received Furniture/machine/equipment, indenter shall release the 90% of the payment of the bill with in 15 days of receipt of the bill. However any delay due to inadvertent reasons shall not entitle the manufacturing/supplier for interest or compensation or damages whatsoever.

b. Director General AYUSH Uttrakhand Dehradun at Dehradun office shall make, or cause the inspection of the machine /equipment if situation so demand and then after satifsfactory inspection the remaining payment shall be released.

c. It shall be the responsibility of all indenters that before making final payment they should deduct all/any amount that the supplier is liable for payment to the purchaser under this or any other agreement.

d. The balance 10% shall be paid after 90 days of supply, installation and on satisfactory performance of the machine/equipment.

9- That packing case containers/shippers etc. supplied to the purchaser, shall be the property of the purchaser and no payment shall be made to the supplier for it.

10- That the supplier is not allowed any authority or rights to sublet the contract in full or in part to. 11- That in the event of the supplier has not supplied the stock being in strict accordance with the conditions herein contained or not being

made within the time allowed the purchaser may deduct or levy on supplier as liquidated damages by way of penalty, as one percent of the value of the said item/material for each and every day of default up to 25 days disiring which the corrected/standard articles contracted are not supplied and/or replaced. Further the purchaser may then can also purchase the required articles or any other suitable substitute to run the hospital from open market at the risk and cost of the supplier in addition to the aforementioned liquidateddamages.

12- Director General AYUSH Uttrakhand alone shall be entitled to adjudicate upon the damages or compensation due for delay etc and also shall be the only authority to advice any positive or corrective action that need to be taken in the matter either independently or in consultation with committee under him. Director General AYUSH can order grant or extra time or making supplies and also condone the whole or part of liquidated damage under clause 12.

13- In Case of not performance in any form of shape of all or any of the conditions of this contract Director General AYUSH shall have power to annual rescind or cancel this contract and upon his notifying in writing to the supplier that he has so done contract shall absolutely determine and the said sum of Rupees------------------------ deposited as security for the due performance of this contract may be forfeited by him and upon this doing so the same shall become the property of the purchaser. Director General AYUSH may also debar the supplier from tendering in further for a period, as he may think fit in proportion to the fault.

14- The every dispute, difference or question which may arise between parties here to or any person claming under them, touching or arising out or in respect of this deed or the subject matter there of shall be referred to for the arbitration of the Secretory of AYUSH Government of Uttarakhand to any person nominated by him in writing. It will be no objection to any such appointment that the arbitrator so appointed is a Government servant, that he had to deal with the matters as to which the contract relates and that in the course of his duties as Government servant he had expressed views on all or any of the matter in dispute or difference. In the event of the arbitrator to whom the matter is originally referred being transferred or vacating his office or unable to act for any reason, Director General AYUSH either enter upon the reference himself or appoint another person to act as arbitrator such person shall be entitled to proceed with reference form the stage it was left by him predecessor. It is also a term of this contract that no person other than a person appointed as aforesaid should act as arbitrator,The matter is not to be referred to arbitration at all in all cases where the amount of the claim in dispute in Rupees Fifty Thousand (Rs. 50,000/-)

15- It is a term of contract that the party invoking the arbitration shall specify the dispute or disputes to be referred for the arbitration together with the amount or amounts obtained in respect of each dispute. Subject as aforesaid the provisions of the Arbitration Act 1940 or any statutory modification or reenactment there of and the rules made there under and for the time being in force shall apply to the arbitration proceedings. The arbitrator may from time to time with the consent of the parties enlarge the time for making and publishing the award.

1- That without prejudice to any other alternative remedy provided by law any amount due from the supplier to the purchaser under this contract shall on the certificate of Direcor Ayurvedic & Unani Services shall be final conclusive and binding on the supplier and shall be recoverable from the supplier as arrears of land revenues.

2- That the supplier will send a copy to the indenter with a copy to Director General AYUSH Uttrakhand,Dehradun statement of goods supplied by him under this contract.

Signature of supplier Director (Name in Capital Letter) Ayurvedic & Unani services Parentage Uttrakhand Dehradun Address.

Funrniture :-

S.N. NAME OF ITEMS SPECIFICATION

1 Physician Table Complete frame work on Heavy M.S. Tubular frame size 3ft x 5ft one side three drawer and one side1 box front closed fitted Solid wood top 1" thick with one side P.U Polish and self moulded having chemically treated & seasoned wood not having moister counted of 10 to 12%

2 Office Table 3 Drawer unit on right side front open, Solid wood top 1" thick with one side P.U Polish and self moulded having chemically treated & seasoned wood not having moister counted of 10 to 12%

3 Physician Revolving Chair High Back Ex Revolving Chair with with push back system, Hydraulic system 5nos. revolving jaiswal make base. P.U arms, P.U seat back leatherite uplosrty cloth support Soccer base Mechanism.

4 Pharmacist Chair with arm Pharmacist chair with arms Low back with 5nos power coated hard ms base with power coated ring.

5 Patient Revolving Stool Hight 45cm. and max 68cm M.S. Tubular Four Legs fitted with PVC Stumps foot ring supports 18” to 27” adjustable height S.S. Top through screw. Pre treated and Epoxy Powder coated finish.

6 Hi-low Patient Examination Table

183L x 51Wx 81Hcms Two Section with Mattress frame work of CRC tubes legs fitted with PVC stumps CRC Sheet top in two sections back rest section adjustable on ratchet Pre treated and E.P coated with mattress covered with rexin.

7 Foot Steps 50 x 40 x 46 M.S. tubular frame fitted with PVC stump m.s. top fixed with rubber matting and aluminum bed Dings.

8 Bed Iron ( Semi fowler) 198 x 90 x 60cm 16G Pipe & 18G CRC Sheet 9 Medicine Distribution Table

with rack Made by Heavy 2” Squire M.S Tubular frame work and top fitted with Teak wood top 2" thick with one side P.U Polish and self moulded having chemically treated & seasomed wood not having moister counted of 10 to 12%Top prelaminated having teak wood biding Rack Made by 16G M.S. sheet Size: 5’ x 3’ and Rack Height 4ft.with dispensing window which can be closed.

10 Visitor Chair Ex-Visitor chair with S.S. Handle and S.S. Base made of Capsule frame and PU Seat & Back with Velvet Cloth

11 Visitor Bench Metallic three seated Visitor sofa heavy base with arms perforated detachable seat back with rust proof special powder coating.

12 Almirah Big (22G) 860 x1980 x760MM Powder coated 13 Almirah small sige(18 G) 32x17x65 inch Powder coated

14 Steel rack 18g side & back side Closed type 5 shelves 72”x36”x15” front with sliding door with lock.

15 Steel rack small 20g side & back side Closed type 3 shelves 38”x36x”15” front with sliding door with lock

16 Steel Bench Three Seater Bench frame work on MS Squire pipe top finish with CRC Sheet epoxy powder coated finish.

17 Stool Steel S.S.Tubular legs fitted with PVC stump S.S.Top sheet duly double press bend

18 Computer Chair Computer chair with arms & push back mechanism seat and back chrome base and handle

19 Examination couch Foam rubber padded top,size 72"x24" upholstered with rexine and had adjustable back rest of 18" length wich can be adjusted in height for desired position One writing board,One drawer with small cubboard provided underneath the top Top mounted on sturdily built well polished hardwood legs. Total height 31".

20 Wheel chair Bright crome plated finish. fitted .630mm over all width open 300mm over al width folded 930 MM over all height 1060 mm over all length minimum 22 Kg weight with foot rest

SPECIFICATION FOR HOSPITAL EQUIPMENTS S.No Name of machine/Equipment Specification Remarks

1 FIBER GLASS DHRONI WITH HI-LO-TILT TABLE

Dhroni made of FRP Material and provide with a special non slippery surface for the body area and contoured shape for the head part, a shirodhara Bowl and 4 Nos powder coated steel Handles. with Hi-low system Complete S.S. 4 wheel with break Flexural Modulus of Dhroni (stiffness) 10000MN/Sq.m Size: 240cm x 31cmx 4 cm

2 Dhroni wooden traditional sirodhara type

teak(Assam Nizirian) or seesam wood one peace with shirodhara bath Size 9.5 x3’x4”

3 (A) SHshirodhara fil

ARWANG DHARA MACHINE (Semi-Automatic):this equipment collects oil from ters it, warms it6 to a preset temp and pumps to the Dhara Vessel hanging from a

ara stand .Provided with a powder coated Steel cover copper heating vessel with pencil heaters, pump digital temperature controller, ball valves for delivery and drain, Stainless steel filter, high quality flexible hose and 4 wheels of 2” size. Adjustable Thermostat assures safe heating even if digital controller fails Size 45cm x 37cm x37cm

Dh

4

SHARWANG DHARA MACHINE WITH DHARA STAND &VESSEL

(b) DHARA STAND: Dhara stand Made from teak wood Arma & Arm support are shaped beautifully collapsidble desing allows portability arm must have traditional look . size column 190cm height x 54cm(overall).Column: 8cm; legs (4 Nos): 10cm wide

5 DHARA VESSEL Made of high quality Copper in Uruli shape and provided with brass fitting brass chains and nickel planted die cast ball valve, capacity 1.5 liters capacity , Size 25cm dia x 9cm depth; wt 0.9 kg

6 SARVANG SWEDAN YANTHRA with digital control (laying type)

Provided with high quality teak wood bed, hexagonal shape chamber fiberglass steam tray, copper pipe steam distributors in forked design and translucent crinkle glass FRP windows Chamber is fully open able using brass or stainless steel hingles and has metallic side arm for opening ease. Teakwood bed is removable. The Digital temperature controller maintains a steady temp. inside the chamber.Collapsible wooden head rest neck shutter and imported ball valve steam inlet are provided size 250cm x 82cm x87cm height wt: approx: 90 kg Boiler: Made of S.S in gas & electric dual heating design provided with a stable stand. Boiler has an ISI quality heater of 3 kW rating with screwed terminals. Automatic electronic level sensor for safety against fry heating, SS Herbal basket, droplet remover, imported thermostat with S.S sensor holder Neoprene O-ring brass safety valve with SS spring pressure gauge of superior “waree” make chrome plated control box and superior relay of of O/E/N make are provided. A special ½” steam hose with plated end fittings is provided for leak proof connection boiler : 95cm dia x 40 cm height

7 STEAM BATH(SITTING) WITH BOILER

Chamber made of fiberglass and provided with copper tube steam distributors brass fittings pre molded non slip floor with leg guard condensate drain channel, cowl for vertical steam tube,

removable neck shutter, powder coated steel support stand adjustable seat with SS top and powder coated frame Size 97cmx79cmx117cm weight aprox.35 kg Boiler: Made of S.S in gas & electric dual heating design provided with a stable stand. Boiler has an ISI quality heater of 5 KW rating with screwed terminals. Automatic electronic level sensor for safety against fry heating, SS Herbal basket, droplet remover, imported thermostat with S.S sensor holder Neoprene O-ring brass safety valve with SS spring pressure gauge of superior “waree” make chrome plated control box and superior relay of of O/E/N make are provided. A special ½” steam hose with plated end fittings is provided for leak proof connection. Size of boiler : 95cm dia x 40 cm height

8 STEAM BATH(SITTING) WITH BOILER

Chamber made of teakwood or Shisham wood and provided with copper tube steam distributors brass fittings pre molded non slip floor with leg guard condensate drain channel, cowl for vertical steam tube, removable neck shutter, powder coated steel support stand adjustable seat with SS top and powder coated frame Size 97cmx79cmx117cm weight aprox.35 kg Boiler: Made of S.S in gas & electric dual heating design provided with a stable stand. Boiler has an ISI quality heater of 3 kW rating with screwed terminals. Automatic electronic level sensor for safety against fry heating, SS Herbal basket, droplet remover, imported thermostat with S.S sensor holder Neoprene O-ring brass safety valve with SS spring pressure gauge of superior “waree” make chrome plated control box and superior relay of of O/E/N make are provided. A special ½” steam hose with plated end fittings is provided for leak proof connection. boiler : 95cm dia x 40 cm height

9 VAMAN PEETH Fabricated using ¾” diameter cold rolled steel. A stainless steel sink, towel bar, measuring jar, breakable wheels and powder coated finish are provided for the table, chair is of a stable design to avoid tilting during Vaman and has a punched metal seat, duly powder coated

10 NADISWEDAN YANTHRA Made with stainless steel material in light weight desing for portable use imported thermostat, brass safety valve with SS spring droplet remover, SS herbal basket and a spray gun with steam diffuser are provided Vessel size 10”x 10” Rating : 2 KW

11 DHARA PATRA WITH HANDLE

Made of white bronze metal in traditional design for Dhara use, hand casted Capacity: 500ml Weight:0.5kg.attached with 2 fit s.s.chain havy duty chain

12 SHIROVASTI CAP: Made of original calf leather with one side lined with artificial leather, to protect the leather form oil light weight; provided with Velcro straps for adjustability Size 20cm width x 80 cm length

13 NASYA PEETH Fabricated using 2.5cm square steel tubes with hand rest adjustable head rest and back rest, well polished wooden rungs for the seating and resting surfaces quick adjust levers are provided for easy positioning steel frame is finished in Electrostatic Powder coating. Size 102cm x63cm x90cm.

14 PANCHKARMA ACCESSORIES

(a) Iron Kadai size 8” wt. 1kg (b) Oil bowl(Stainless steel) capacity 2 liter wt. 0.4kg

(c) Nasya yantra made of hand casted white bronze metal in classical shape capacity 40 ml; wt. 50gm

15 VASTI YANTRA (BRONZE) Made by nad casting method out of white bronze metal in classical shape. Size 19cm length,4cm diameter with bluend end.

16 VASTI YANTRA WITH ADAPTOR FOR VARIOUS TIPS:

FOR NIRUHA VASTI: a set of 50 nos each of disposable vasti nethrams and bags along with a permanent sterilizable yantram all made of surgical plastic two types of bags of 500 ml, 1000 ml and 1500ml capacity are provided the yantra and nethrams are transparent for visual checking of air treatment.

17 FOR MATHRA VASTI: This is a 60 ml metal syringe made of chromium plated brass with polymer head end that can accept screwing of various Vasti Nethras Nethrams(tips) meant for matra vasti are used with this

18 FOR SNEHAN VASTI similar to Matra vasti yantra but of 250ml capacity and has bronze head -end 19 KATI SNAN TUB Fiberglass to resist hot medicinal liquids stitch bonded fiberglass reinforcement are used to obtain

strength values of 70MN/Sq.m Size 45cm dia(bottom)x 56cm height.

20 AWAGAHA TUB (FRP) WITH RE-CIRCULATION SYSEM

Fiberglass bath tub made of FRP Material a structural frame made of 20mm size CR square pipes and cladded with Hylam sheet Re-circulation system and digital temperature control system. The bath tub has no-slip profiled floor molded hand rest handle bars, hand switch for pump operation, cold & hot water inlets and overflow provision hand held flexible body jet stainless steel boiler with 2 KW heater digital temperature controller cum indicator and mechanical thermostat for safety against digital control failure. The FRP body has avg. thickness of 4 mm Size 160cmx75cmx55cm height

21 MIXURE WITH GRINDER Maharaja,Bajaj,Usha etc. mixure with grinder branded comany 22 B.P.INSTRUMENT with mercury column ISI mark Diamond,pagoda,Lifeline 23 Stethoscope Lifeline,Doctor brand ISI 24 Clinical Therma meter make- Doctor, hics, etc 25 Digital weighing machine adult with 100kg capacity ISI Mark

Crown/Krups/Prestige

26 Tongue Depressor 304 Grade Stainless Steel ISI mark 27 Bed side screen three fold screen Size 228x174Hc 28 Refrigerator small 165litre capacity LG. Godrej.,Samsung 29 Pulse ox meter Spo2 range10-100% Spo2 accuracy ± 2% for 70-100 /±3% for 40-69 Pulse rate range 30-240

BPM Pulse Rate accuracy ± 2 BPM Display LED display of Spo2 & pulse Rate Display of Pulse amplitude alarm Spo2 High /Low 40-100 alarm Pulse Rate High/Low 30-240 Dimension 160L s 157B x 110W (mm) weight < 2kg Power 230V AC/50Hz Battery NimH, 7.2V/1.6Ah Operatin time >6Hours Charging Time 8Hours Power consumption 2W

30 Needle destroyer

31 Steam Pack Made of strong water absorbing fabric containing special gel crystals which absorb many times its own volume of water and retain heat for pretty long time. Packs can be appied again and again for moist heat therapy 2525 Standard Size 25x30cm. 2526 Half Size 12x30cm. 2527 contour shape 16x60cm. 2528 full back size 25x50cm.

32 Lumber cum Cervical Traction unit

Eight traction modes for eight Lumber or Cervical traction including intermittent progressive Regressive & Static ,Traction force: adjustable from 4 Kg to 90 Kg Base force: Adjustable from 0 kg to 80 Kg Traction Hold Time : adjustable 0 Kg to

33 Rotary Wrist machine Cast Iron wheel fof 12" diameter. Mounted on a laminated wooden base 24"x9" small adjustable handle fitted to the wheel. Hollowed foam padded platform sixe 9"x5"x6" high fitted on the wheel for wrist circumduction. Metal Parts oven bked finish & wooden parts finished natural.

34 Grip exerciser ( with base) Bright chrome plated finished,metallic frame grip exerciser fitted on a 50 mm wide laminated wooden base.

35 Therapy putty (imported 100 gms pack)

Bleedproof nontoxic,clean & Non ily therapy putty leaves no coluour or residue on patients hand and it won't fragment,separate or stick to skin

36 Exercise putty board A laminated slanted board for putty manipulation exercises 37 Ball medicine with cabinet Ball medicine made out of fine leather,securely stitched with strong leather cord in different

weights 1kg,2kg,3kg,4kg,& 5 Kg polished teakply constructed cabinet with double door for storage.

38 Static cycle exerciser built rubular steel frame stands solidity on four rubber tipped properly balanced legs rubber tyred wheel standard chain and socket for bicycle drive . with ball bearing fitted resistance roller

39 Sterilizer S.S Size 14"x 7" x6'' S.S Electric cum gas operated

40 Sterilizer S.S Size 10"x 56" x3'' S.S Electric cum gas operated

41 Dressing drum S.S Size 9"X9" S.S 42 X-Ray View Box Double 14x17" metal body Single & Double film Superior quality

43 Pressure Cooker Hokins/United/Prestiges 10ltr,5ltr,3ltr 44 Gas Stove Single Burner ISI marrk

45 Gas Stove Double Burner ISI marrk

46 Steel Bowel 304 High Grade Big Approx Size 16”

47 Medium 12”

48

Steel

Small 6”

49 Plastic Bucket Size 13,16,18,20 litre Polyset,Unilite make

50 Bucket Iron Heavy Iron Bucket Cap.25ltr enamel coated

51 Heat Convector Bajaj/Kenstar/Philips/Murphi Richards

52 Torch 2Cell/3Cell Eveready/Zeep 53 Emergency Light Khetan,Philips,Crompton 54 Diagnostic Set suprier quality 55 Doctor Appren Green heavy Cashment 56 Doctor Appren White Heavy Cashment 57 Threapy Appren White Terikot Cloth 58 Threapy Appren Green Terikot Cloth 59 Towel White 40x60",61x122cm,68x137cm100% Pure cotton both side 60 Duster 1x1" 100% Cotton

61 Dispensing Balance Digital Dispensing Balance I.S.I. 62 Bed Mattress • 4” & 40 density Foam mattress with rexin cover for plain Bed

• 4” & 40 Density Foam mattress with Rexin cover for Semi fowler bed • 4” & 40 Density Foam mattress with Rexin cover for Full Fowler Bed

63 Bed Sheet White 150cmx 250cm. cotton reputed mills 64 Blanket Red/Green with boarder Standard Size 65 Bed Side Locker Deluxe

Bed Side Locker Genral

• Size: 36L x 40W x 81H cms Locker machine pressed from 20G CRCA Sheet with all three side closed having one box & a drawer S.S.Top mounted on two 5cm dia siwvling castor two pvc stump.

• Size 36L x 40W x 81Hcms Tubular pipe construction fitted PVC stumps assembled to MS Cupboard Stainless Steel Top.

66 Electric Cautry (Bipolar) HF output (auto cut effet 4) 300w in 500 ohms (300 KHZ ± 15%) Forced Coag. Output power : 120W in 350Ohm (Pulse modulated) Haemostasis Levels (effects) Four Spray coagulation output power-120W in 350 Ohms (Pulse Modulated) Auto STOP/SOFT Coag. Output power 120W in 125 Ohms ( 340 KHZ ± 15% Auto Biplolar out power -120 in 125 Ohms (350KHz ± 15%) Output power display accuracy ± 15% or 5W which ever greater.

67 Oxygen Cylinder with Stand B Type Oxygen cylinder approx 13.5Ltr with Trolly 68 Formelene chamber 26” x 8” x 8”

23’ x 8” x 8” 20” x 8” x 8” 14” x 8” x 6”

69 Ultra violet lamp 70 Nebulizer Aerosal therapy with piston compressor temporary are 30/30min ON/OFF 71 Kshar Sutra cabinet S.S. Box 6x4" Top covered by Glass 72 Digital Spirometer 73 Digital ENG Machine 74 Digital Height & Weight

machine Digital Height & Weight machine

75 Pt. Examination Couch Size: 6.5ftL x 2ft W x 29” Hight Two fold three Drawer on Upper side and Two cabinet on lower size swinging tray for B.P.Instrument with Epoxy Powder coated finish

76 Mortuary Chamber Made by SS Sheet, Trays traveds on roller fitted with bearing for easy movement standard space four bodies, hermetically sealed compressor, Digital temperature indicator cum controller, 220/230Volts, AC supply, capacity four bodies temp 2º C to 5ºC

77 Binocular Microscope Binocular Microscope with complete co-axial body with din size objective 4X, 10X,40Xm 100X oil immersion with Dye PC 5X, 1X wide field light sources halogen.

78 Bio matric attendance machine on line transaction without any computer or internet facility battery backup minimum 10 hours card reading facilities RS 232 ,RS485 TCP/IP,USB port

79 E.S.R.Annalyzer 10tube 80 Heamatology cell counter 81 Incubator Child 82 Insect Killer wallmounted Size: 24” Double UV Tube with wall hanging frame 83 Insect Killer With Light 84 Centrifuge Machine Remi 8 tube 85 Phototherapy Unit Double Surface mobile on stand with UV Tube 86 Urine Analyzer 87 Radiant Heat Warmer Perfect warm “Open Care System” RHW with Double surface Phototherapy 88 V.D.R.L. Rotator 89 Titration machine Etc. with bag

90 Fixer Devloper tank 9 ltr 91 Glucometer Accuchek Active 92 Fumigator 5ltr capacity Stainless Steel 93 Genral Surgery Instrument • Artery Forcep St. & Curved S.S.6”

• Needle Holder 6” • Scisser Pointed Sharp 6” • Mosquito Forcep 12.5cm St. curved • Epistomy Scisser 6” • Stich Cutting Scisser 6” • Allies Forcep 6” S.S. • Mayo’s Scisser 6” • Sponge Holding Forcep 8” • Cheatle Forcep 8”

94 Feotal Dopler Feotal Dopler Digital with Rechargeble Batery Feotal Dopler Manual Electicaly operated 95 Suction machine Suction machine with Single Poly Jar Electric ¼ H.P. Foot Operated 96 Autoscope Imported Autoscope Imported Welch Allien 97 Ophthalmoscope Heins Min Beta 200 Heins 98 Operation Table HI-LOW Operation Table HI-Low 72” x 20”W x 32”H Heavy duty tubular frame work on smooth

running castors and floor lock this is a exceptionally fine surgical table. Sturdily built and elegant finish in princess gray colour offering a very comprehensive reverse trendlenburg technology with mattress

99 Operation Table Operation Table for minor O.T S.S.Top three fold with legging arrangement with mattress 100 Cylinder Trolley Small

Cylinder Trolley Large Cylinder trolly small tubular frame work two 10cm castor mas sheet base plate pretreated epoxy powder coated finish , Tubular frame work two15cm castor MS sheet base plate pretreated epoxy powder coated finish.

101 Hot Air Oven 12” x 12” Hot Air Oven 12” x 12” with Thermostate 102 Steam Pack Made of strong water absorbing fabric containing special gel crystals which absorb many times

its own volume of water and retain heat for pretty long time. Packs can be appied again and again for moist heat therapy 2525 Standard Size 25x30cm. 2526 Half Size 12x30cm. 2527 contour shape 16x60cm. 2528 full back size 25x50cm.

103 Lumber cum Eight traction modes for eight Lumber or Cervical traction including intermittent progressive

Cervical Traction unit

Regressive & Static Traction force: adjustable from 4 Kg to 90 Kg Base force: Adjustable from 0 kg to 80 Kg Traction Hold Time : adjustable 0 Kg to 80 kg Traction Table Comfortable Hi-lo electric hight adjustment electrically with hand switch 50 cm to 95 cm Top Size 195cm long x70cm wide Power supply 220v

104 Traction Chair(Cervical)

Chair should adjusts easily up to 45* for proper flexion Overall dimensions 55cm widex 90cm long fitted with 4 ball bearing casters with brakes

105 Compete exercising unit

Complete Unit consists table weight pan assembly and with attachments and accessories,ankle and leg exerciser,foot drop boot adult& child supination & pronation wheel quadriceps rest wire handle wooden cabinet for storage aluminium bar 24" Painted iron plates of 1 kg each-32 kg,Palvic rest,Head harness wrist/Ankle cuff Alum.bar alu.collars table height 85cm.Table 195 cm long x80cm wide . Foam padded table mounted on a tubular frame

106 Multi exercise therapy Unit

Teakwood suitable for exercises of all upper and lower limbs wall bar 240cmx75cm wide.Detachable wrist roller with sidae handle for supination and pronation exercises. Removable Rowing machine cum Sliding seat, four handles 12 pulleys nylon rope and double set of locking weights for pulley exercises

107 Nautical cum shoulder wheel

All steel construction.fitted with 8 handles on a tubular circle of 100 cm dia mounted on bush bearing and fitted with calibrated sensitive Resistance mechanism controllable from Zero to maximum. The 360 degree scale enables degree

108 HAND EXERCISE TABLE

Table with laminated top fitted with 6 pulleys in a steel frame. Loops and nylon cord passing through the pulleys with hanging weights under

109 3 Para Monitor

1. ECG / SPO2 / NIBP patient monitor 2. 5.6” color TFT display 3. Adult / pediatric / neonate application 4. Facility to feed in patient details 5. Inbuilt battery operation – Li-ion battery 6. Printing to external printer through USB connectivity 7. 24 hours trend for SpO2 / HR both graphical & tabular 8. Trend of 100 NIBP readings 9. Facility to connect to external VGA display 10. Central monitor connectivity through Ethernet 11. Trend download to USB flash

110 ECG Electrode- 3 / 5 lead Lead- Lead I, II, III, aVr, aVl, aVf, V Gain selection-0.5, 1, 1.5 or 2 Sweep speeds-12.5, 25 or 50 mm / sec SpO2 (Nellcor)- Plethysmograph, pulse amplitude indicator, pulse rate and % of oxygen saturation Display Sweep speed-12.5, 25 & 50 mm / sec SpO2 range-0 -100 % NIBP Display- Systolic, Mean, Diastolic Display- Systolic, Mean, Diastolic Interval-1 - 120 minutes, Range-0 - 300 mmHg, Electrical- Power input-90~270 V AC, 50Hz, Inbuilt battery type- Li-Ion, Operating time-> 120 min, Charging time- 8-10 Hours

111 5 Para Monitor 1. ECG / SPO2 / NIBP / Respiration / Temperature patient monitor 2. Large 10.4” color TFT display 3. Adult / pediatric / neonate application 4. 5 channel configurable waveform display 5. Facility to feed in patient details 6. Inbuilt battery operation – Li-ion battery 7. Printing to external printer through USB connectivity 8. 24 hours trend for SpO2 / HR / Respiration / Temperature 9. Trend of 100 NIBP readings 10.Facility to connect to external VGA display 11.Central monitor connectivity through Ethernet 12.Trend download to USB flash 13.Drug Calculation facility 14.Upgradeable to IBP and Capnograph

112 lotus 500N A portable and light weight NIBP/Spo2 monitor with plethysmographic waveform display.

Features include: • High resolution graphic LCD with backlit with a plethysmographic display • Display of plethysmograph with numerics of %O2, Pulse Rate, Systolic,

Diastolic & Mean BP • Easy menu driven operation • Programmable audiovisual alarms • Trend - 24 hour SPO2 / 100 NIBP readings • Mains and battery operated

Specifications Electrical: Power supply: 230V AC / 50Hz Power Consumption: 3 W Inbuilt battery: NimH 7.2V / 1600 mAH Operating time: >3 Hrs Spo2: SpO2 range: 40 -100% SpO2 accuracy: ± 2% for 70-100 / ± 3% for 40 -69 Pulse Rate range: 30 -240 BPM Pulse Rate accuracy: ± 2 BPM Messages: Pulse Search Check sensor No Finger in prob Low battery Alarms SpO2: High / Low 40 – 100% Alarm Pulse Rate: High / Low 30 – 240 BPM

113 A- SCAN PROBE FREQUENCY : 10 M Hz ACCURACY : Clinical +/- 0.1mm : Electronic +/- 0.0484mm AXIAL MEASUREMENT LIMITS : 18-46 mm LIQUID CRYSTAL DISPLAY : 5”x7” MODES : Automatic & manual VOLTAGE : 12VDC/Using 120/220 AC : Adaptor POWER : 5 Watts SIZE : 239x225x71mm WEIGHT : 5 Ibs IOL FORMULAS : Brinkhorst, Holladay, Theoretic/T : Rege5ession II, & Hoffer Q OPTIONAL EQUIPMENTS : Thermal printer w/interface cable

EXAMINATION MODES : Normal cataract +. Dense Cataract Aphakic, Pseudo and manual

MEASUREMENTS MODES :Axial length, Anterior Chamber, Depth and hens Thickness, Axial Length average & Standard deviation up to 5 Scene

PROBE : Solid Tip 2 SURGICAL CAVTERY (BIPOLAR) L & T : 400 Wat Digital 3 MULTIPAR MONITOR (ROUR PARA) : L & T 4 C- ARM ( ALLENGER)

114 ELISA- READER USER INTERFACE : Large Touch Screen LCD With Backlight PLATE TYPE : 96 well plate (U.V or Flat Bottom)

WAVELENGTH : Accuracy (+2nm), Half width

(s12nm), Peak Transmittance (> 35%)

WAVELENGTH RANGE : 400-800 nm FILTERS : 405 nm, 450 nm 492 nm 630 nm, 3

free position for optional filters NOS. OF OPEN PROTOCOLS : 42 READING RANGE : 0-3,5A. READING UNIT : 8 Channel LIGHT SOURCE : Tungsten Halogen 12V/20W ABSORBANCE : 0.001A ABSORBANCE ACCURACY : +0.03A (0-2.5A) REPEATABILITY (CV.%) : S1% STABILITY : < 0.005A/10min READING SPEED : Single wavelength >5s/plate(96-

well plate) Dual wavelength < 10s/plate (96-

well plate) Plate mixing : 3 Linear Speed (High, Normal, Low)

Plate Mix : Time (0-60s) 115 MULTIPAR MONITOR

(FOUR PARA)Physical Specification

Size :322 mm(w)x285mm(H)x150mm (D)

Weight :Standard Configuration 4-5 Kg

Display

Colour TFT LCD 8.4” Touch screen Resolution 800 x 600 dpi Traces Displayed up to 8 waveforms Displayed up to 11 Various working interface Selectable : Standard Monitoring Display Large Font intensive Care Display Trend Graph/ Monitoring Co-Display Bed to Bed view Display (Optional) OxyCRGDyanmic View Display Drug Dose Calculation interface Sweep Speed 6.25 mm/s,12mm/s25mm/s,50mm/s RESP Method Tran- Thoracic impedance Operation mode Auto/manual RR Measurement range Adult 0”120 r PM Neonate/Pediatric 0.150rPM

Resolution: 1rPm Apnea alarm threshold 10s,15s,20s(default),25s,30s,35s,40s Alarm Yes, audible and visual alarm , alarm events recallable Band width: 0-2.5Hz/s (-3dB) Sweep Speed 6.25mm/s,12mm./s 25mm/s 50mm/s

ECG Lead Type 5- lead and 3lead selectalble, 12 lead optional 3 leadwire cable RA LA LL or R, L, F 5 leadwire cable RA, La, RL, LL, V or R,L, N, F, C NIBP

Method Automatic Oscllometric Operation modes Manual./ Automatic/Continuous Auto measurement time interval Adjustable 1/2/3/4/5/10/15/30/60/90/120/240/480minutes Measurement types Systolic, Diastolic Mean Pressure range for Adults: Systolic 40-270 mmHg Diastolic 10-215 mmHg Mean 20-235 mmHg Pressure range for paediatrics: Systolic 40-200 mmHg Diastolic 10-150mmHg Mean 20-165 mmHg Pressure range for Neonates ; Systolic 40-135 mmHg Diastolic 10-100 mmHg Mean 20-110 mmHg Leak test and pressure auto calibration : Yes Over pressure protection : Dual Safety Protection Resolution 1mmHg Accuracy Max mean error + 5mmHg Max standard deviation 8mmHg Alarm Systolic, Diastolic, Mean PR from NIBP Measurement 40-240 bpm Resolution 1bpm Accuracy 3bpm or 3% whichever is greater Leak test and pressure auto calibration Yes IEC 2-30 SPO2 Measurement & Alarm Range 0-100% (SPO2) Resolution 1% Accuracy 2% (70-100 adult/paediatric) 3% (70-100% Neonate) PR measurement and Alarm Range 30-300 bpm Resolution 1bpm Accuracy 30-300bpm Refresh rate 1s ISO 9919

TEMPERTURE ( 2Channels 1 probe by default) Optional QUICK TEMPERTURE /IBP/CO2/RECORDER Optional I/O Interface USB Port SD card Socket RJ-45 Ethernet Port, IEEE 802.3 VGA Output Analog & Nurse Call output Defibrillation Synchronization output WLAN Access Point 802-11g 54 Mbps (Optional)

116 MULTIPAR MONITOR (FIVE PARA)

Physical Specification

Size :370 mm(w)x320mm(H)x175mm (D)

Weight :Standard Configuration 7 Kg

Display

Colour TFT LCD 15” Touch screen Resolution 10-24x768/800x600 dpi, Traces Displayed up to 10 waveforms, Displayed up to 13 Various working interface Selectable : Standard Monitoring Display Large Font intensive Care Display Trend Graph/ Monitoring Co-Display Bed to Bed view Display (Optional) Oxy CRGD yanmic View Display Drug Dose Calculation interface Sweep Speed 6.25 mm/s,12mm/s25mm/s,50mm/s RESP Method Tran- Thoracic impedance Operation mode Auto/manual RR Measurement range Adult 0”120 r PM Neonate/Pediatric 0.150rPM

Resolution: 1rPm Apnea alarm threshold 10s,15s,20s(default),25s,30s,35s,40s Alarm Yes, audible and visual alarm , alarm events recallable Band width: 0-2.5Hz/s (-3dB) Sweep Speed 6.25mm/s,12mm./s 25mm/s 50mm/s

ECG Lead Type 5- lead and 3lead selectalble, 12 lead optional 3 leadwire cable RA LA LL or R, L, F 5 leadwire cable RA, La, RL, LL, V or R,L, N, F, C 12 lead (Including 3/5 lead) Optional NIBP Method Automatic Oscllometric Operation modes Manual./ Automatic/Continuous Auto measurement time interval Adjustable 1/2/3/4/5/10/15/30/60/90/120/240/480minutes Measurement types Systolic, Diastolic Mean Pressure range for Adults: Systolic 40-270 mmHg Diastolic 10-215 mmHg Mean 20-235 mmHg Pressure range for paediatrics: Systolic 40-200 mmHg Diastolic 10-150mmHg Mean 20-165 mmHg Pressure range for Neonates ; Systolic 40-135 mmHg Diastolic 10-100 mmHg Mean 20-110 mmHg Leak test and pressure auto calibration : Yes Over pressure protection : Dual Safety Protection Resolution 1mmHg Accuracy Max mean error + 5mmHg Max standard deviation 8mmHg Alarm Systolic, Diastolic, Mean PR from NIBP Measurement 40-240 bpm Resolution 1bpm Accuracy 3bpm or 3% whichever is greater

Leak test and pressure auto calibration Yes IEC 2-30 SPO2 Measurement & Alarm Range 0-100% (SPO2) Resolution 1% Accuracy 2% (70-100 adult/paediatric) 3% (70-100% Neonate) PR measurement and Alarm Range 30-300 bpm Resolution 1bpm Accuracy 30-300bpm Refresh rate 1s ISO 9919 TEMPERTURE ( 2Channels 1 probe by default) Optional QUICK TEMPERTURE /IBP/CO2/RECORDER Optional I/O Interface 2 USB Port SD card Socket RS 232 Serial port RJ-45 Ethernet Port, IEEE 802.3 VGA Output Analog & Nurse Call output Defibrillation Synchronization output WLAN Access Point 802-11g 54 Mbps (Optional)

117 AUTOMATED HEMATOLGY ANALYZER

Principles WBC, RBC, and Electrical Resistance detection

HGB SLS Haemoglobin

HCT Cumulative pulse Height Detection

Parameters 18 Parameters

WBC,RBC, HGB, HCT, MCV, MCH, MCHC, PLT, LYM%MXD% NEUT% LYM#, MXD#

NEUT# RDW-SD, PDW MPV, P-LCR

Throughput Approx 60 Samples/Hour

Sample Volume Whole Blood mode-50µl

Predilute mode 20 µl

Precision Parameter Whole Blood mode

WBC 3.5% or lower

RBC 2.0% or lower

HGB 1.5% or lower

HCT 2.0% or lower

PLT 6.0% or lower

Linearity

WBC 1.0-99.9X103 / µl (Within + 0.3x103/ µl or+3%)

RBC 0.30-7.00X106/µl (Within + 0.3x106/ µl or+3%)

HGB 0.1-25.0 g/dl (Within + 0.2g/dl or+2%)

HCT 10.00-60.0% HCT% (Within + 1.0 HCT% of +3%)

PLT 10-999x103 /µl (Within + 10x103/ µl or+5%)

(When RBC > 7.00x106/ µl)

Data Storage 240 Patients results

Interfaces Serial port for host computer Optional

Built in Thermal Printer 5x7 dots 21 Characters per line (128dots/lines)

Dimensions Approx 420x480x355 W x H x D (mm)

Weight (kg) Approx

Power Consumption 230 VA or less

117 EDGERUNNER MODEL C-2 DIAMERER OF PAN -2 Ft WORKING CAPACITY -25 Kg

MOTOR - 2Hp

118 BALL MILL SIZE - 2’x2’ MOTOR - 2 Hp For grinding – Hardness up to 8 mesh scale.

119 MULTI MILL MODEL – CAP- 5/15 Kg/Hours For wet & Day Granulation

120 DISiNTIGRATOR For crushing materials from 4 to 6” Size down to 80 mesh. SIZE - 12” dia MOTOR - 5 Hp/3 Phase CAPACITY - 80-100 Kg/Hours

121 HAMMER MILL For grinding herbs roots, and drugs of medium Hardness. SIZE - 4x10 MOTOR - 2 Hp CAPACITY - 12 Kg/Hours

122 MICROPULVERISER For grinding wet & dry materials of medium hardness up to 4 mesh, fibrous Products. SIZE - SFMP 1

MOTOR - 2 Hp CAPACITY - 10 Kg/Hours

123 GRANITE END RUNNER For Prep. Bhasma/Bhawan/Ghautai etc.

124 ELECTRIC FURNACE SIZE - 12x12x12 19 Kw/440v, 3 Phase

125 KUPIPAKVA RASAYANA FURNACE

CAPACITY - Two Bottles

126 KHARAL MACHINE DOUBLE AUTOMATIC