Odontit - CATALOGO

PRODUCTS CATALOG

Evolution and eFeDeA are Odontit’s Osseointegrated Dental Implant Systems. This system was developed in 1986 based on criteria of ease of use and simplicity. The Self-Tapping Implant has a smooth, highly polished collar of 2 mm height that allows to use it with both submerged and semi-submerged techniques, one- or two-stage surgical procedure. The threaded body of the implant is doubly acid-etched, which generates a rough surface that helps reduce the loading time. This system is in full compliance with FDA regulations and Good Manufacturing Practice. All system components go through strict QC inspection procedures and have a tight tolerance of ±.0005 inch (0.01 mm). Implants are supplied in a sterile double container with Implant Mount and Cover Screw. Implant containers have a removable patient chart label for future reference.

In view of the spread of implants of all kinds, qualities, prices, and origin within the dental-implant market, we wish to remind you that ODONTIT complies with recognized legal and health standards.

The approval of these standards requires strict manufacturing procedures and exhaustive quality controls. These norms allow you not to be worried and your patient to be safe; they are your support and aim to protect you, guaran-teeing that you are using APPROVED products.

Do not get your malpractice insurance cover withdrawn.You have invested plenty of time and effort in training, equipment, and day-to-day improvement, do not uselessly put your peace of mind, prestige and patrimony in risk using products that give you no additional benefit but do put you in a vulnerable position.

Our Company has the authorizing certificates provided by the A.N.M.A.T.- Department of Health and Environment.A.N.M.A.T. Web Page: www.anmat.gov.ar

April 2007

www.odontit.com • [email protected] Tel. (54-11) 4825-0221 • Fax (54-11) 4903-9330

Azcuénaga 1077 • 4ºD • C1115AAE • Ciudad Autónoma de Buenos Aires • Argentina

MADE IN USA

1

EFEDEA IMPLANT - MADE IN USA

FDA Self-Tapping ImplantRough Surface by Double Acid Etching & Sand Blasting - Cover Screw

Made in Titanium-2nd gradeCharacteristics: Single Point Internal ThreadPLATFORM: 4.1 mmDIAMETER: 3.75, 4.00 & 5.00 mmLENGHTS: 8, 10, 11.5, 13 & 15 mm (including collar)COLLAR: Smooth, highly polished, 2.0 mmEXTERNAL HEX: 2.70 mm flat-to-flat, 0.7 mm heightROUGH SURFACE: By Double Acid Etching & Sand BlastingDelivery: Sterile Surgical Set including Implant, Implant Mount and Cover Screw

DIAMETER LENGHT CATALOG #

8 mm. IF 3008M 10 mm. IF 3010M 3.75 mm 11.5 mm. IF 3011M 13 mm. IF 3013M 15 mm. IF 3015M

8 mm. IF 4008M 10 mm. IF 4010M 4.00 mm 11.5 mm. IF 4011M 13 mm. IF 4013M 15 mm. IF 4015M

All other measures are replaced by the 5.00 mm HEXIMPLANTS in the Evolution product line. (see page 2)

Cover Screw Catalog # HCSTornillo de obturación temporaria.

eFeDeA Implants

eFeD

eA Im

plan

ts

.048

Products Catalog

2

JJG EVOLUTION IMPLANT SYSTEM(Made in USA)

JJG EVOLUTION HEXIMPLANT 3.75, 4.00 y 5.00 mm COMPATIBLE

Characteristics: Titanium-5th grade. Auto-Advancing & Self-Tapping Implant. Recommended for immediate loading,early or conventional procedures.DIAMETER: 3.75 mmLENGHTS: 10, 11.5, 13 mm (including collar)COLLAR: Smooth, highly polished. 2 mm height.EXTERNAL HEX: 2.70 mm flat-to-flat, 0.7 mm height (4.1 mm platform)ROUGH SURFACE: By Double Acid Etching & Sand BlastingDelivery: Sterile Surgical Set including Implant, Implant Mount and Cover Screw.


10 mm. EH3010M

3.75 mm 11.5 mm. EH3011M

13 mm. EH3013M 15 mm. EH3015M

8 mm. EH4008M 10 mm. EH4010M 4.00 mm 11.5 mm. EH4011M 13 mm. EH4013M 15 mm. EH4015M

8 mm. EH5008M 10 mm. EH5010M 5.00 mm 11.5 mm. EH5011M 13 mm. EH5013M 15 mm. EH5015M

Drill no more than 3/4 the length of the implant.

Instrumental necesario para su colocación:

Catalog # EIDL30Twist Drill, 3.0 mm diameter. For EH 3.75 mm diameter implants.

Catalog # EIDL33 (optional)Twist Drill, 3.3 mm diameter. For EH 3.75 mm diameter implants.


JJG

Evo

lutio

n Im

plan

t Sys

tem

JJG Evolution Implant System

3

Catalog # EIDL40Twist Drill, 4.0 mm diameter. For EH 5.00 mm diameter implants.


Catalog # THD48Torque Hex Driver 0.048”

Catalog # OEWOpen End Wrench.

Catalog # RW (optional)Ratchet Wrench.

Catalog # ADL (optional)Digital Wrench Adapter.

JJG EVOLUTION SWISS IMPLANT 4.00 mm COMPATIBLE

Characteristics: Titanium-5th grade. Auto-Advancing & Self-Tapping Implant.8º Morse cone with Implant Mount/UCLA Ti.DIAMETER: 4.00 mmCUP DIAMETER: 4.80 mmLENGHTS: 10, 11.5, 13 & 15 mm (including collar)COLLAR: Smooth, highly polished. 2 mm height. With microspires in its lower part.MORSE CONE: CompatibleROUGH SURFACE: By Double Acid Etching & Sand BlastingDelivery: Sterile Surgical Set including Implant, Implant Mount/UCLA Ti with or without Cover Screw.


10 mm. ES4010M

4.00 mm 11.5 mm. ES4011M 13 mm. ES4013M 15 mm. ES4015M


JJG Evolution Swiss Implant System Instrumentation:

Catalog # EIDL33Twist Drill, 3.3 mm diameter. For ES 4.00 mm diameter implants.

Catalog # EIDL35 (optional)Twist Drill, 3.5 mm diameter. For ES 4.00 mm diameter implants.

Catalog # THD48Torque Hex Driver 0.048”.




Catalog # ESCSTitanium Cover Screw.

JJG Evolution Implant System

JJG

Evo

lutio

n Im

plan

t Sys

tem

Products Catalog

4 JJG Evolution Implant System

JJG

Evo

lutio

n Im

plan

t Sys

tem

JJG EVOLUTION JJG EVOLUTION MONOBLOCK 3.00 & 3.75

Characteristics: Titanium-5th grade. Auto-Advancing & Self-Tapping Implant. One-Piece Implant/Abutment-Post.Recommended for immediate loading procedures.DIAMETER: 3.00 & 3.75 mmLENGHTS: 10, 11.5, 13 & 15 mm (including collar)COLLAR: Smooth, highly polished. 2 mm height.ABUTMENT HEIGHT: 7 mm Non-Rotating Shouldered Abutment.ROUGH SURFACE: By Double Acid Etching & Sand BlastingDelivery: Eli Implant Sterile Surgical Set.


10 mm. MB3010N 3.00 mm 11.5 mm. MB3011N 13 mm. MB3013N 15 mm. MB3015N

10 mm. MB3010 3.75 mm 11.5 mm. MB3011 13 mm. MB3013 15 mm. MB3015

Drill no more than 3/4 the length of the implant. Catalog # CG300Plastic gingiva former. Monoblock 3.00 mm.

Catalog # AM300Plastic abutment analog. Monoblock 3.00 mm.

Catalog # CG375Plastic gingiva former. Monoblock 3.75 mm.

Catalog # AM375Plastic abutment analog. Monoblock 3.75 mm.

JJG Evolution Monoblock Implant System Instrumentation:

Catalog # EIDL20Twist Drill, 2.0 mm diameter for 3.00 mm.

Catalog # EIDL25 (optional)Twist Drill, 2.5 mm diameter for 3.00 mm.

Catalog # ENTEvolution Monoblock Wrench 3.00 mm.

Catalog # EIDL25Twist Drill, 2.5 mm diameter for 3.75 mm.

Catalog # EIDL28 (optional)Twist Drill, 2.8 mm diameter for 3.75 mm.

Catalog # EMTEvolution Monoblock Wrench 3.75 mm.




5JJG Evolution Implant System

JJG

Evo

lutio

n Im

plan

t Sys

tem

JJG EVOLUTION JJG EVOLUTION BALL 2.20

Characteristics: Titanium-5th grade. Auto-Advancing & Self-Tapping Implant with Ball Attach.Recommended for immediate loading procedures.DIAMETER: 2,20 mmLENGHTS: 10, 11.5, 13 & 15 mm (including collar)COLLAR: Smooth, highly polished. 2 mm heightROUGH SURFACE: By Double Acid Etching & Sand BlastingDelivery: Eli Implant Sterile Surgical Set, Including metal housing with O’ring.

DIAMETER LENGHT CATALOG # 10 mm. EB2210 2.20 mm 11.5 mm. EB2211 13 mm. EB2213 15 mm. EB2215


Catalog # MH02AMetal housing with high retention O’ring.

Catalog # MH02MMetal housing with medium retention O’ring.

JJG Evolution Monoblock Ball Implant System Instrumentation:

Catalog # EIDL16Twist Drill, 1.6 mm diameter.

Catalog # EIDL20 (optional)Twist Drill, 2.0 mm diameter.

Catalog # EBTEvolution Ball Wrench, 2.2 mm.




JJG EVOLUTION JJG EVOLUTION ORTHODONTIC 1.60 mm

Characteristics: Titanium-5th grade. Auto-Advancing & Self-Tapping Implant. For orthodontic treatment.DIAMETER: 1.60 mmLENGHTS: 6, 8 & 10 mmSURFACE: Not processed / Delivery: Eli Implant Sterile Surgical Set


6 mm. EORT1606 1.60 mm 8 mm. EORT1608 10 mm. EORT1610

JJG Evolution Orthodontic Implant System Instrumentation:

Catalog # EBT/ORTEvolution BALL/ORT Wrench, 2.2 and 1.60 mm.

Catalog # EIDL10Twist Drill, 1.0 mm diameter.


Products Catalog

6

SURGICAL & PROSTHETIC INSTRUMENTATION

Catalog # FLLocator Drill.

Catalog # FPPilot Drill, 2.0 to 3.0 mm.

Twist Drill (External Irrigation System)

Catalog # EIDL16Twist Drill 1.6 mm.









Spade Drill (Internal Irrigation System)

Catalog # IIDL20Spade Drill 2.0 mm.





Surgical & Prosthetic Instrumentation

Surg

ical

& P

rost

hetic

Inst

rum

enta

tion

7Surgical & Prosthetic Instrumentation

Surg

ical

& P

rost

hetic

Inst

rum

enta

tion

Bone Taps for Ratchet Wrench Catalog # BTL3Latch Type Bone Tap Long 3.75 mm.

Catalog # BTL4Latch Type Bone Tap Long 4.0 mm.

Bone Taps for Mount Drivers Catalog # HBTS3Latch Type Bone Tap Short 3.75 mm.

Catalog # HBTS4Latch Type Bone Tap Short 4.0 mm.

Catalog # HBTL3Latch Type Bone Tap Long 3.75 mm.

Catalog # HBTL4Latch Type Bone Tap Long 4.0 mm.

Countersink Drills Catalog # CSDLCountersink Drill Long 3.75 / 4.00 mm.

Catalog # CSDS3Countersink Drill Short 3.75 / 4.00 mm.

Screwdrivers

Catalog # WSDLWide Slotted Driver.

Catalog # HHD38Latch Type Driver 0,038” mechanical.

Catalog # HSDLatch Type Slotted Driver.

Catalog # HHD48Latch Type Driver 0,048” mechanical.

Catalog # HD50Screwdriver 0,050”.

Implant Mount Drivers for 4x4 mm square.

Catalog # IMDSLatch Mount Driver Short.

Catalog # IMDLLatch Mount Driver Long.

Products Catalog

8

Drill Extender

Catalog # DEDrill Extender.

Paralleling Pins

Catalog # DI-2Paralleling Pins (2 unit pack).

Open End Wrench for 4x4 mm square.


Ratchet Wrench for 4x4 mm square.

Catalog # RWRatchet Wrench.

Catalog # RERatchet Extension.

Implant Depth Gauge

Catalog # IDGImplant Depth Gauge.

Digital Wrench Adapter for 4x4 mm square.


Implant Mount

Catalog # IMImplant Mount.

Torque Wrench System

Catalog # TW10Torque Wrench 10 Ncm.




Surg

ical

& P

rost

hetic

Inst

rum

enta

tion

9Surgical & Prosthetic Instrumentation

Surg

ical

& P

rost

hetic

Inst

rum

enta

tion

Screwdrivers

Catalog # THD48Torque Hex Driver 0.048” (For Ratchet Wrench & Open End Wrench).

Catalog # THD50Torque Hex Driver 0.050”.

Catalog # SQDLSquare Driver.

Catalog # THDLSlotted Driver.

Autoclavable Surgical Organizer Tray

Catalog # INORGAutoclavable Surgical Organizer Tray. Measures 190 x 90 x 33 mm. Capacity for 20 elements plus long instruments.

Osteotomes

Catalog # OSTEO2 Handles: Straight for the Front Section Angled for the Rear Section15 Interchangeable Aspirator Tips For Bone Compression (convex): 2 to 4 mm; 2.5 to 3 mm; 3 to 3.5 mm; 3.5 to 4 mm, and 4.5 to 5 mm. For Sinus Floor Elevation (concave): 1.5 to 3 mm; 2 to 3 mm; 2.5 to 4 mm, and 3 to 4 mm. For Implants: 1.8 mm; 2 mm; 3 mm; 4 mm; 2 to 2.5 mm, and 3 to 4 mm.

Trephine.

Catalog # TREFTrephine.

Abutment Forceps.

Catalog # PPMAbutment Forceps.

Castro Viejo needle holder forceps.

Catalog # PACVCastro Viejo needle holder forceps.

Castro Viejo surgery scissors.

Catalog # TCCVCastro Viejo surgery scissors.

Products Catalog

10

Molt Periosteal Elevator.

Catalog # VPMMolt Periosteal Elevator.

Catalog # VPBBuser Periosteal Elevator.

Lucas Curette

Catalog # VCLLucas Curette

Large Surgical Chisels.

Catalog # VCQGLarge Surgical Chisels.

Catalog # VCQMMedium Surgical Chisels.

Osteotomes for expansion. Angled or Straight

Catalog # VOEXOsteotomes for expansion. Angled or Straight (Measures 2.1, 2.75, 3.25, 3.75)

Osteotomes for sinus floor elevation

Catalog # VOLSOsteotomes for sinus floor elevation (Sammer Technique). Angled or Straight (Measures 2.75, 3.25, 3.75)

Catalog # VEXPBone Expanders. Stoma-like Breaker (Measures 2.8, 3.5, 4.2)

Bone Carrier.

Catalog # VIPHBone Carrier.

Catalog # VCAMMetal Suction Tip.

Catalog # VCALCaliper (Imported)

Catalog # VBE220 element Perforated Sterilization Tray.

Catalog # VBE110 element Perforated Sterilization Tray.

Surg

ical

& P

rost

hetic

Inst

rum

enta

tion


11Prosthetic Abutments

PROSTHETIC ABUTMENTS

Threaded-threaded Prosthetic System • 2 degrees AbutmentSubgingival Height: 1, 2, 3, 4, 5, 7 mm.Emergence Profile.Shoulder Diameter: 5.2 mm. / Prosthetic Shoulder: 0.5 mm.

Catalog # SA212º Titanium Shouldered Abutment 1 mm.






For Screwed Prostheses • 2º Non-Rotating Shouldered AbutmentSubgingival Height: 1, 2, 3, 4, 5, 7 mm.Emergence Profile.Shoulder Diameter: 5.2 mm. / Prosthetic Shoulder: 0.5 mm.

Catalog # SA21N2º Titanium Non-Rotating Shouldered Abutment 1 mm.


Catalog # SA23N2º Titanium Non-Rotating Shouldered Abutment 3 mm. Catalog # SA24N2º Titanium Non-Rotating Shouldered Abutment 4 mm.



For Screwed Prostheses • 15º Shouldered Abutment. Allows up to 30º of deviation between ImplantsSubgingival Height: 3, 4, 5, 7 mm.Emergence Profile.Shoulder Diameter: 5.2 mm. / Prosthetic Shoulder: 0.5 mm.



Pros

thet

ic A

butm

ents

Products Catalog

12



Prosthetic Screw

Catalog # PSHProsthetic Screw.

Healing Caps

Catalog # SAHC22º Plastic Healing Cap.

Catalog # SAHC1515º Plastic Healing Cap.

Cemented ProsthesisOne Piece (non-hexed) for multiple unit prosthetics only.Attaches directly to the implant.

Catalog # TTA7Titanium Tapered Abutment 7 mm.

Catalog # TTA10Titanium Tapered Abutment 10 mm.

Cemented ProsthesisHexed with fastening screw. For cemented prosthetics - Attaches directly to the implant.Two Piece (hexed base) allows single tooth restoration.

Catalog # TTR1Titanium Tapered Abutment 7 mm, Hexed, with Fastening Screw. Subgingival height: 1 mm.

Catalog # TTR1CHTitanium Tapered Abutment 7 mm, Shouldered and Hexed, with Fastening Screw. Subgingival height: 1 mm.

Catalog # TTR2Titanium Tapered Abutment 7 mm, Hexed, with Fastening Screw. Subgingival height: 2 mm.

Catalog # TTR2CHTitanium Tapered Abutment 7 mm, Shouldered and Hexed, with Fastening Screw. Subgingival height: 2 mm.

Catalog #TPFastening Screw.

15º & 25º Pre-Angled Abutments

Catalog # PA1515º Pre-Angled Abutment with fastening screw.

Pros

thet

ic A

butm

ents

Prosthetic Abutments

Prosthetic Abutments

13

Catalog # PA2525º Pre-Angled Abutment with fastening screw.

Catalog # TPFastening Screw.

Castable UCLA AbutmentUCLA with screw

Catalog # UCLACastable Abutment, with fastening screw.

Catalog # UCLA N/HCastable Abutment, Non-Hexed, with Fastening Screw.

Catalog # TPFastening Screw.

Healing AbutmentsEmergence Profile - Diameter: 5.20 mm. / Heights: 3.0 & 6.0 mm.

Catalog # HHA2Titanium Healing Abutment 2 mm.




OVERDENTURE ABUTMENTS

Ball Attach System for Implants (Including metal housing with O’ring, extra O’ring)

Catalog # OR1.5Ball Attach System. Subgingival height: 1.5 mm.

Catalog # OR2Ball Attach System. Subgingival height: 2 mm.

Catalog # OR3Ball Attach System. Subgingival height: 3 mm.

Ball Attach System for Roots (Including metal housing with O’ring, extra O’ring and Analog)

Catalog # AITBall Attach System for Natural Root.

Prosthetic Abutments / Overdenture Abutments

Over

dent

ure

Abut

men

ts

Pros

thet

ic A

butm

ents

Products Catalog

14

MAGNETS

Catalog # IM 5111Magnet 5.5 mm diameter x 3.0 mm thick, capacity: 500 g.



LABORATORY COMPONENTS

For Screwed Prostheses

Catalog # TCY2N2º Non-Rotating Shouldered Abutment Plastic Transfer Coping-Cylindrical.

Catalog # TCY22º Shouldered Abutment Plastic Transfer Coping-Cylindrical.

Catalog # TCY1515º Shouldered Abutment Plastic Transfer Coping-Cylindrical.

Catalog # TCO2N2º Non-Rotating Shouldered Abutment Plastic Transfer Coping-Conical.

Catalog # TCO22º Shouldered Abutment Plastic Transfer Coping-Conical.

Catalog # TCO1515º Shouldered Abutment Plastic Transfer Coping-Conical.

Lab Screw for Waxing Up

Catalog # TG13Transfer Guide 13 mm.

Catalog # TG18Transfer Guide 18 mm.

Laboratory Analogs Catalog # SAA2N2º Non-Rotating Shouldered Abutment Analog.

Catalog # SAA22º Shouldered Abutment Analog.

Catalog # SAA1515º Shouldered Abutment Analog.

Catalog # HIAHex Implant Analog.

Com

plem

ento

s de

Lab

orat

orio

Laboratory Components

Iman

es

15Tissue Regeneration System / Bone Grafting Material

TISSUE REGENERATION SYSTEM

Autogenous Bone Collection Device (FDA Clearence)

Catalog # ABCAutogenous Bone Collection Device. Delivery: Sterile, Disposable, Single Use Only.

Catalog # SOVVacuum Autoclavable Aspirator Tips. Delivery: 10 Non-Sterile Aspirator Tips.

Resorbable Membranes

Catalog # MECEResorbable Membrane, Collagen, 30 x 30 mm.

Catalog # MECE-MResorbable Membrane, Collagen and Metronizadole, 15 x 30 mm.

Catalog # MECE-CResorbable Membrane, Collagen and Chlorhexidine Digluconate, 15 x 30 mm.

Non-Resorbable Membrane

Catalog # 3425TINon-Resorbable Titanium Membrane, 34 x 25 mm. Made in USA.

BONE GRAFTING MATERIAL

Catalog # RECHFibrous Collagen Bone Grafting Material, 400 mg (2 Pack, 200 mg each).

Catalog # HL1 (E)Freeze-dried Bone, 0.2 to 1 mm x 1.0 cm3.

Catalog # HL1 (CED)Freeze-dried Bone 0.2 to 1 mm x 1.0 cm3.

Catalog # FOSF-3Tricalcium Phosphate 500 mg. Made in Japan (0.3 to 0.6 mm).

Catalog # FOSF-6Tricalcium Phosphate 500 mg. Made in Japan (0.6 to 1.0 mm).

Catalog # TABLFreeze-dried Cortical-spongy Splint, approx. mize 10 x 20 x 3 mm.

Tiss

ue R

egen

erat

ion

Syst

emBo

ne G

raft

ing

Mat

eria

l

Products Catalog

16

SUTURES

SUTURFIX sutures properties:

Sterilized by Gamma Radiation.In compliance with the US Pharmacopoeia (USP)Uniform-diameter Sutures.

AVAILABLE SUTURES:

NYLON MONOFILAMENT • BLACK SILK BRAIDED (75 cm long)

SHAPES: EYELESS ATRAUMATIC NEEDLES: SUTURES SIZES:

Round Bodied (U.S.P.) 5-0 4-0 3-0 Metric 1.5 2 3

SUTURFIX BLACK SILK BRAIDED • 12 Pack.

STERILE ATRAUMATIC SUTURENON-REABSORBABLEU.S.P.Sterilized by Gamma RadiationNEEDLE LENGHTS: 16 & 20 mmNEEDLES: 1/2 circle & 3/8 circle. Round Bodied and Reverse CuttingUSP: 3-0 & 4-0

Catalog # SK301612TBlack Silk Suture, size 3-0, 16 mm, 1/2 circle, Reverse Cutting.


Catalog # SK302012RBlack Silk Suture, size 3-0, 20 mm, 1/2 circle, Round Bodied.





Catalog # SK402012RBlack Silk Suture, size 4-0, 20 mm, 1/2 circle, Round Bodied.



Reverse Cutting

NEEDLE LENGHTS:

16 mm. 20mm.

Sutures

Sutu

res

17Sutures

Sutu

res

SUTURFIX Nylon Monofilament • 12 Pack

STERILE ATRAUMATIC SUTURENON-REABSORBABLEU.S.P.Sterilized by Gamma RadiationNEEDLE LENGHTS: 16 mmNEEDLES: 1/2 circle - Reverse CuttingUSP: 5-0

Catalog # NY501612TNylon Monofilament, size 5-0, 16 mm, 1/2 circle, Reverse Cutting.

Catalog # NY501638TNylon Monofilament, size 5-0, 16 mm, 3/8 circle, Reverse Cutting.

PRE-THREADED EYED NEEDLES • BLACK SILK BRAIDED • STERILE • 10 Pack (BY REQUEST)

Catalog # S301612RSuture 3.0, 16 mm, 1/2 circle, Round Bodied.

Catalog # S301612TSuture 3.0, 16 mm, 1/2 circle, Reverse Cutting.

Catalog # S302012RSuture 3.0, 20 mm, 1/2 circle, Round Bodied.

Catalog # S302012TSuture 3.0, 20 mm, 1/2 circle, Reverse Cutting.

EYED NEEDLES • NON-STERILE • 10 Pack (BY REQUEST)

Catalog # AG1612TNeedle, 16 mm, 1/2 circle, Reverse Cutting.

Catalog # AG1612RNeedle, 16 mm, 1/2 circle, Round Bodied.

Catalog # AG2012TNeedle, 20 mm, 1/2 circle, Reverse Cutting.

Catalog # AG2012RNeedle, 20 mm, 1/2 circle, Round Bodied.

Products Catalog

18

Othe

r Pro

duct

s

OTHER PRODUCTS

CONTRA-ANGLE

Catalog # CA1:1RContra-Angle 1:1, roller bearing disassemblable handpiece.

Catalog # CA1:1BContra-Angle 1:1, bushing disassemblable handpiece.

Catalog # CA16:1Contra-Angle 16:1, roller bearing disassemblable handpiece.

MICROMOTOR

Catalog # BR3000Micromotor with physio dispenser. 400 to 24,000 rpm.Automatic Torque Control.Digital Display.forward/reverse switch.Lighting & Audible signals.Can be used with reducing contra-angles.

Catalog # BR3000RMicromotor with physio dispenser & reductor. 400 to 24,000 rpm.Automatic Torque Control.Digital Display.Forward/Reverse switch.Lighting & Audio signals.Can be used with 1:1 contra-angles.

CÁMARA INTRAORAL

Catalog # CAMIntraoral camera, RCA connection to TV.

Other Products

Odontit - CATALOGO

Documents

Transcript of Odontit - CATALOGO