octoBox Standard Configurations - Wireless Personal ... STACK-BENCHTOP BOX-26 4 4 RF cables 1:4 4x4...
17
Standard Configurations April 2018
Transcript of octoBox Standard Configurations - Wireless Personal ... STACK-BENCHTOP BOX-26 4 4 RF cables 1:4 4x4...
Standard Configurations April 2018
www.octoscope.com
Tests supported by standard octoBox testbedsSTACK-BENCHTOP STACK-MESH STACK-16
MIMO-OTA Y Y Y (up to 16 streams)
MU-MIMO Y Y Y
Beamforming Y Y Y
Throughput vs. range Y Y Y
Throughput vs. orientation Y Y
Packet capture (PCAP Wireshark format) Y Y
Multipath Y
Mesh Y
Interoperability Y Y
Interference Y Y
Network load (ACI, CCI) Y Y
DFS, ACS Y Y
Expert monitoring and analysis Y Y
Mobility / roaming Y Y
Receiver performance Y Y Y
Association capacity (vSTA) Y Y
Multi-channel aggregate throughput Y Y Y
Roaming / band steering Y Y
2
ACI = adjacent channel interference
CCI = co-channel interference
DFS = dynamic frequency selection
ACS = auto channel selection
vSTA = virtual stations
Most tests are supported
over both Wi-Fi and LTE;
LTE instrumentation (e.g. call
box) or base station required
for LTE testing
www.octoscope.com
STACK-BENCHTOP
3
4 RF cables 1:4 4x4 MIMO 1:4 Splitter quadAtten
Legend:
4 SMA connectors
STACK STACK DIMENSION TOTAL WEIGHT
STACK-BENCHTOP 24.8”H x 26.4”W x 25.2”D
(63cm x 67 x 64)
123.5 LBS (56 kg)
4 dipole antennas
BOX-26
1:4Pal-5
Pal-24
Pal-5
iGen
www.octoscope.com
STACK-BENCHTOP Dimensions and Weight
4
26.4” (67cm)
18”
(46cm)
BOX-26
95 Lbs.
(43Kg)
25.2”
(64cm)
Front view Side view
STACK-BENCHTOP INSIDE DIMENSIONS WEIGHT
BOX-26 13.35”H x 19.35”W x 13.35”D
(34cm x 49cm x 34cm)
95 LBS (43 kg)
Components
BOX-26
Pal-24 2.4 & 5GHz
2 Pal-5 5GHz
iGen interference generator
3 quadAtten 90dB
1:4 4x4 MIMO RF splitter
OBS-42 Camera
SW-OCTOBOX
www.octoscope.com
5
STACK-MESH
1:4
Pal-245
Pal-24
Pal-5
1:4
MPE2-38Pal-5
BOX-18
BOX-TT
Multipath emulator
iGen
www.octoscope.com
6
STACK-MESH + superPal
1:4
Pal-245
Pal-24
Pal-5
1:4
MPE2-38Pal-5
superPal
superPal subsystem
3
1:2
1:2
5 GHz
2.4 GHz
2x Bluetooth
iGen
www.octoscope.com
STACK-MESH dimensions and weight
7
consoleswitch
24”
74.5”
593.5 LBS (269 kg)
STACK-MESH INSIDE DIMENSIONS WEIGHT
BOX-18 10.6”H x 13.6”W x 21.5”D
27cm H x 35cm W x 55cm D70 LBS.(32kg)
BOX-TT 19.35”H x 31.5”W x 21. 5”D
49cm H x 80cm W x 54.6cm D
172 LBS (78 kg)
Components
BOX-TT
2 BOX-18
5 quadAtten 90dB
2 Pal-5 5GHz
Pal-24 2.4GHz
Pal-245 (2.4, 5GHz)
iGen interference generator
2 OB-4WAYsplitter
OB-MPE2 –multipath emulator
6 High Gain MIMO Antenna Arrays
SW-OCTOBOX
www.octoscope.com
octoBox STACK-SNB Testbed
Throughput vs. Range
Maximum 4x4 throughput
Mesh and airlink capacity
BOX-18
BOX-38
Multipath emulator
SNB = SmallNetBuilder.com
8
www.octoscope.com
STACK-SNB Block Diagram
9
1:4
1:21:4
1:2
1:4
Pal-245
quadSwitch
Pal-24
Pal-5
TS- MESH
TS-MESH
BOX-18 Hop 1 BOX-18 Root
BOX-18 Hop 2
MPE2-38
BOX-38-TT
STACK STACK DIMENSION Total Weight
STACK-SNB 62”H x 40”W x 31”D
(157cm x 102cm x 79cm)
647 LBS (293 kg)
www.octoscope.com
STACK-SNB Dimensions and Weight
10
38.35” (97cm)
24”
(61
cm)
5.5”(14 cm)
40” (102cm)
6“(15cm) 18.5”
(47cm)
13” (33cm)BOX-18 :
70 Lbs.
(32 Kg)
MPE 2: 85 Lbs. (38.5 Kg)
BOX-38 : 172 Lbs.
(78 Kgs)
31” (79cm)
31.2” (79cm)
61.5” (157cm)
Total Weight : 647 LBS (293 kg)
Front view Side view
STACK-SNB INSIDE DIMENSIONS
BOX-18 10.6”H x 13.6”W x 21.5”D
27cm H x 35cm W x 55cm D
BOX-38 19.35”H x 31.5”W x 21. 5”D
49cm H x 80cm W x 54.6cm D
www.octoscope.com
STACK-16
11
High Gain – Dual Band
High Gain – 5 GHz Only
BOX-38
1.11.2
1.3 1.4
2.1
3.1
4.1
4.3
3.3
2.3
2.2 3.2 4.2
4.4 3.4 2.4
BOX-38
1.11.2
1.3 1.4
2.1
3.1
4.1
4.3
3.3
2.3
2.2 3.2 4.2
4.4 3.4 2.4
3.1 – 3.4
3.1 – 3.4
4.1 – 4.4
4.1 – 4.4
1.1 – 1.4
1.1 – 1.4
2.1 – 2.4
2.1 – 2.4
STACK STACK DIMENSION TOTAL WEIGHT
STACK-16 54”H x 40”W x 31”D
(137cm x 102cm x 79cm)
469 LBS (213 kg)
5 GHz antennas
Dual band antennas
www.octoscope.com
STACK-16 Dimensions and Weight
12
38.35” (97cm)
24”
(61
cm)
40” (102cm)
OB-BASE :
100Lbs. (45 Kgs)
Total Weight : 469 Lbs.
(213 Kgs)
BOX-38 :
187 Lbs.
(78 Kgs)
31.2” (79cm)
31” (79cm)
Front view Side view
6“(15 cm)
54”
(137cm)
www.octoscope.com
STACK-16 Components and Inside Dimensions
13
STACK-16 INSIDE DIMENSIONSBOX-38 19.35”H x 31.5”W x 21. 5”D
49cm H x 80cm W x 54.6cm D
Components
BOX-TT (octoBox-38 chamber, 19 SMA, with Center
Mount TT)
octoBox-38 chamber, 19 SMA Connections
4 quadAtten 90dB
octoBox-38-BASE
OBS-42 Camera
www.octoscope.com
STACK-THREAD
14
US Metric
Dimensions 60.5”H x 34”W x 28.5”D 1.53m x 86.36cm x 72.39 cm
Weight 362.5 LBS 164.4 kg
Components
BOX-26
BOX-26
BOX-26
OB-QUADATTEN
OB-BASE-26
BOX-26
BOX-26
BOX-26
quadAtten
1 RF cable
www.octoscope.com
STACK-THREAD Dimensions and Weight
15
26.35” (67cm)
6“(15 cm)
60.375”
(153cm)
25.2”(64c
m)
28.5”(72cm)
OB-BASE : 68Lbs. (31 Kgs)
Total weight : 362.5 Lbs.
(164.4 Kgs)
18”
(46cm)
BOX-26:
95 Lbs.
(43kgs)
Side view Front view
28.5”(72cm)
STACK-THREAD INSIDE DIMENSIONS
BOX-26 13.35”H x 19.35”W x 13.35”D
(34cm x 49cm x 34cm)
www.octoscope.com
octoBox server
• DELL PRECISION TOWER 3420
w/ INTEL 10GB ETHERNET NETWORK ADAPTER X540T1
16
www.octoscope.com
Boston area headquarters305 Foster Street
Littleton, MA 01460 USA
Tel: +1.978.222.3114
California office780 Montague Expressway, Building 1
San José, CA 95131 USA
Tel: +1.978.339.9431
