October 2008 CLASSIFICATION DEFINITIONS D3 - 1 CLASS …October 2008 CLASSIFICATION DEFINITIONS D3 -...
Transcript of October 2008 CLASSIFICATION DEFINITIONS D3 - 1 CLASS …October 2008 CLASSIFICATION DEFINITIONS D3 -...
October 2008 CLASSIFICATION DEFINITIONS D3 - 1
CLASS D3, TRAVEL GOODS AND PERSONAL BELONGINGS
SECTION I - CLASS DEFINITION
This class provides for design patents claiming ornamental designs for:
1. Hand-held fans and elements
2. Umbrella, parasols, canes, and crutches
3. Storage containers for hand-sewing-type equipment
4. Storage containers for shoe shine equipment, including kits
5. Carrier or storage containers for personal belongings
6. Elements and attachments specific to articles in this class
SECTION II - REFERENCES TO OTHER CLASSES
SEE OR SEARCH CLASS: D2, Apparel and Haberdashery, subclass 614 for
glove or hand covering combined with purse or pouch, subclass 839 for vest- or jacket-type multiple holder (e.g., fisherman’s -or photographer’s-type vest), subclass 864 for apron-type tool, subclass 866 for headwear (e.g., hat) combined with glasses, and subclass 905 for athletic shoe combined with pocket.
D4, Brushware, subclass 104 for finger cot, subclass 108 for combined toothbrush and storage container, and subclass 199 for toothbrush storage container.
D6, Furnishings, subclasses 407 through 635 for storage cabinet for reproduction tape, film, or disk; and subclass 552 for wall-mounted or fixed-type rack or holder for sports articles.
D7, Equipment for Preparing or Serving Food or Drink Not Elsewhere Specified, subclasses 605 through 608 for insulated food or beverage container, subclass 619 for beverage container holder or serving caddy, and subclass 635 for open-type toothpick holder.
D8, Tools and Hardware, subclasses 1 through 106 for tool, subclasses 300-320 for handle, subclass 382 for generic snap-type closure, and digests 1-10 for handle configurations.
D9, Packages and Containers for Goods, subclasses 600 through 762 , 500-575 and subclasses 414-433 for disposable-type packaging, including record jacket; subclass 700 for sewing kit or needle and thread package; subclasses 600-681 for simulative bottles and disposable containers; and subclasses 516-575 or generic bottle.
D11, Jewelry, Symbolic Insignia, and Ornaments, subclass 78.1 for moneyclip, subclass 220 for apparel-type snap closure or fastener, and subclass 221 for apparel-type zipper.
D12, Transportation, subclass 130 for industrial designs for walkers, subclass 133 for elements or attachments for walkers, subclass 402 for bicycle cover, and subclass 417 vehicle visor-attached-type eyeglass holder.
D13, Equipment for Production, Distribution, or Transformation of Energy, subclass 168 for remote control.
D15, Machines Not Elsewhere Specified, subclasses 69 through 76 for sewing machine and subclass 72 for sewing machine cabinet.
D16, Photography and Optical Equipment, subclass 236 for cartridge for holding photographic slides and subclass 339 for mask strap or cord retainer for attaching to eyeglasses.
D18, Printing and Office Machinery, subclass 11 for slide rule case.
D19, Office Supplies; Artists’ and Teachers’ Materials, subclasses 26 through 31 for checkbook and subclasses 41-51 for marking instrument.
D21, Games, Toys, and Sports Goods, subclasses 793 through 795 for golf tool and subclass 796 for golf club holder or stand.
D22, Arms, Pyrotechnics, Hunting and Fishing Equipment, subclass 104 for pistol, subclass 107 for quiver, and subclass 118 for sword or hunting knife.
D23, Environmental Heating and Cooling; Fluid Handling and Sanitary Equipment, subclass 410 for coal basket.
D24, Medical and Laboratory Equipment, subclass 145 for medical suturing device; and subclass 224 for medication vessel, such as vile or bottle.
D26, Lighting, subclasses 37 through 50 for handheld or body-attached light.
D27, Tobacco and Smokers’ Supplies, subclasses 180 through 182 for pipe holder or rack; and subclasses 183-192 for tobacco jar, pouch, or cigarette case.
October 2008
1
D3 - 2 CLASSIFICATION DEFINITIONS October 2008
D28, Cosmetic Products and Toilet Articles, subclasses 56 through 60 for manicure tools; subclass 61 for manicure rack, stand, tray, or kit; and subclass 76 for soap bar container; and subclasses 78-84 for compact for cosmetic product.
D29, Equipment for Safety, Protection, and Rescue, subclasses 101.1 through 101.4 for harness-type carrier.
D32, Washing, Cleaning, or Drying Machine, subclass 14.1 for shoeshine machine and subclass 37 for laundry basket.
D34, Material or Article Handling Equipment, subclass 39 for barrel, cask, or drum.
D99, Miscellaneous, subclasses 34 through 42 for coin holder or bank.
SUBCLASSES
1 HAND FAN: This subclass is indented under the class definition. Design for device waved manually to create a flow or current of air.
(1) Note. Element included in this and in indented subclasses.
SEE OR SEARCH CLASS: D23, Environmental Heating and Cooling;
Fluid Handling and Sanitary Equipment, subclasses 370 through 384 for power-type fan.
2 Folding: This subclass is indented under subclass 1. Design that includes a provision for bending or sliding into a compact configuration.
3 Simulative: This subclass is indented under subclass 2. Design that includes an ornamental feature or features that simulate the ornamental appearance of another object either as applied ornamentation or form.
(1) Note. The search for a hand fan that simulates the appearance of another object should also include the appropriate Design Class and subclass(es) for the actual object.
4 Simulative: This subclass is indented under subclass 1. Design that includes an ornamental feature or features that simulate the ornamental appearance for another object either as applied ornamentation or form.
5 UMBRELLA OR PARASOL, WALKING SUPPORT: This subclass is indented under the class definition. Design for a collapsible ribbed canopy mounted on a central pole or stick manually used to protect against rain or sun and stick-type aid used to stand or walk.
SEE OR SEARCH CLASS: D12, Transportation, subclass 130 for
industrial designs for walkers and subclass 133 for elements or attachments for walkers.
6 Simulative: This subclass is indented under subclass 5. Design that includes an ornamental feature or features that simulate the ornamental appearance of another object either as applied ornamentation or form.
7 Cane or walking support: This subclass is indented under subclass 5. Design for hand-held stick-type support used to aid standing or walking.
(1) Note. Includes swagger stick.
SEE OR SEARCH CLASS: D12, Transportation, subclass 130 for
industrial designs for walkers and subclass 133 for elements or attachments for walkers.
8 Underarm support: This subclass is indented under subclass 7. Design for support that extends to the ground from beneath the shoulder at the arm.
(1) Note. Includes crutch.
9 Plural tips: This subclass is indented under subclass 7. Design that includes more than one end member or cap attachment.
October 2008
October 2008 CLASSIFICATION DEFINITIONS D3 - 3
10 Element or attachment: This subclass is indented under subclass 5. Design for parts or accessory-type attachments for umbrella, parasol, or walking support.
14
(1) Note. The subject matter in this subclass and its indented subclasses must show an element or an attachment specific to umbrellas, parasols, etc. Generic-type elements, which could also be used as elements or attachments for articles in other Design Classes, are excluded.
(2) Note. Element or attachments for this subject matter subject matter could be included as part of a disclosure that is directed to a complete article. Accordingly, a proper search for an element or attachment should include a search for the complete article.
15
SEE OR SEARCH THIS CLASS, SUBCLASS: 5 through 9, for designs of complete
articles which include disclosure of elements.
11 Carrying case or sleeve: This subclass is indented under subclass 10. Design for protective cover or container specific for umbrella, parasol, cane, or walking support.
SEE OR SEARCH THIS CLASS, SUBCLASS: 300, for generic sleeve-type carrier or stor
age container.
16
17
12 Handle: This subclass is indented under subclass 10. Design for hand-type support specific to an umbrella, parasol, cane, or walking support. 18
SEE OR SEARCH CLASS: D8, Tools and Hardware, subclasses 300
through 320 for handle and digests 110 for handle configurations.
13 Combined with diverse article: This subclass is indented under subclass 12. Design combined with an article that, if disclosed separately, would be proper subject mat
ter for a subsequent subclass or design patent class.
Simulative: This subclass is indented under subclass 12. Design that includes an ornamental feature or features that simulate the ornamental appearance of another object either as applied ornamentation or in form.
(1) Note. The search for a hand fan that simulates the appearance of another object should also include the appropriate Design Class and subclass(es) for the actual object.
Animate: This subclass is indented under subclass 14. Design that includes an ornamental feature or features that simulate the ornamental appearance for an animal or part of an animal (including human animal) either as applied ornamentation or general form.
SEE OR SEARCH CLASS: D21, Games, Toys and Sports Goods, sub
classes 576 through 657 for toy animal figure.
Offset or asymmetrical: This subclass is indented under subclass 12. Design that lacks symmetry in general form.
Tip or ferrule: This subclass is indented under subclass 10. Design for cap or ring used to ornament the endof an umbrella, parasol, or cane.
SEE OR SEARCH CLASS:D8, Tools and Hardware, subclass 374 for
furniture-type tip or cap.
HAND SEWING, KNITTING, AND EMBROIDERY EQUIPMENT: This subclass is indented under the class definition. Design for article or accessory for manually joining or decorating textile-type materialwith thread, yarn, or filament.
SEE OR SEARCH THIS CLASS, SUBCLASS:280, for sewing machine case.
October 2008
1
D3 - 4 CLASSIFICATION DEFINITIONS October 2008
SEE OR SEARCH CLASS: 26 D9, Packages and Containers for Goods,
subclass 700 for sewing kit or needle and thread packages.
D10, Measuring, Testing, or Signalling Instruments, subclass 97 for counter used in knitting.
D15, Machines Not Elsewhere Specified, subclasses 66 through 76 for sewing machine and subclass 72 for sewing machine cabinet.
20 Article storage or holder: This subclass is indented under subclass 18. Design for storage container specific to hand sewing, knitting or embroidery equipment. 27
21 Simulative: This subclass is indented under subclass 20. Design that includes an ornamental feature or features that simulate the ornamental appearance of another object either as applied ornamentation or in form.
28 (1) Note. The search for a hand fan that sim
ulates the appearance of another object should also include the appropriate Design Class and subclass(es) for the actual object.
22 Pincushion: This subclass is indented under subclass 21. Design for pad to hold pins.
SEE OR SEARCH THIS CLASS, SUBCLASS: 27, for pincushion that does not simulate
another object.
23 Yarn, thread, etc.: This subclass is indented under subclass 20. Design for the storage of indeterminate length of thin, spun textile material.
29 24 Spool type:
This subclass is indented under subclass 23. Design for reel-type holder for winding yarn or thread.
25 Multiple spindle type: This subclass is indented under subclass 24. Design for multiple holder or spool.
Work holder: This subclass is indented under subclass 20. Design for supporting sewing, needlework, or embroidery-type materials.
SEE OR SEARCH CLASS: D5, Textile or Paper Yard Goods; Sheet
Material, for embroidered, knitted, or crocheted material.
D6, Furnishings, for cabinet or furniture-type storage.
D15, Machines Not Elsewhere Specified, subclass 72 for sewing machine cabinet.
Pincushion: This subclass is indented under subclass 20. Design for pad to hold pins.
SEE OR SEARCH THIS CLASS, SUBCLASS:22, for simulative pincushion.
Needle- or bodkin-type implement: This subclass is indented under subclass 18. Design for pin device that includes a point at one end and a hole for thread at the other end used for hand sewing.
(1) Note. Includes blunt, thick needle with a large eye, and similar article.
SEE OR SEARCH CLASS: D15, Machines Not Elsewhere Specified,
subclasses 69 through 77 for sewing machine needle holders claimed as elements for a sewing machine, and subclass 78 for industrial-type needle holders.
D24, Medical and Laboratory Equipment, subclass 145 for medical suturing device.
Thimble: This subclass is indented under subclass 18. Design for finger protector used in hand sewing or embroidery.
SEE OR SEARCH CLASS: D4, Brushware, subclass 104 for finger
cot.
October 2008
October 2008 CLASSIFICATION DEFINITIONS D3 - 5
200 SHOESHINE CASE, KIT, OR FOOTREST: This subclass is indented under the class definition. Design for storage container for shoe polishing equipment or foot support used to support foot for shoe polishing.
SEE OR SEARCH CLASS: D4, Brushware, miscellaneous subclasses
for shoeshine brush. D32, Washing, Cleaning, or Drying
Machine, subclass 14.1 for shoeshine machine and subclass 47 for shoe or boot scraper.
201 CARRIER OR STORAGE CONTAINER: This subclass is indented under the class definition. Design for reusable container used to hold personal belongings for travel or storing.
(1) Note. Designs in this and indented subclasses are classified by full-line disclosure only.
SEE OR SEARCH CLASS: D6, Furnishings, for furniture-type storage
cabinets; and subclasses 407 through 635 for storage containers and furniture specifically directed to audiovisual and information recording media, such as magnetic tape, CDROM, recordings, etc.
202 Beverage vessel: This subclass is indented under subclass 201. Design for holding liquid.
(1) Note. Includes canteen and handled flask.
SEE OR SEARCH THIS CLASS, SUBCLASS:229, for body-attached beverage container,
pouch, or carrier. 304 through 314 and indented sub
classes, for bin, tray, or basket designed for the purpose of carrying beverage containers.
SEE OR SEARCH CLASS: D7, Equipment for Preparing or Serving
Food or Drink Not Elsewhere Specified, subclass 619 for beverage container holder or serving caddy.
D9, Packages and Containers for Goods, subclasses 600 through 762 for simulative bottles and disposable containers and subclasses 516-575 for generic bottle.
203.1 Medical equipment or medication: This subclass is indented under subclass 201. Design for the storage or carrying personal medications or emergency type medications or treatment materials.
(1) Note. Includes emergency or first aid kit.
SEE OR SEARCH THIS CLASS, SUBCLASS: 264, through 266, for eyeglass or contact
lens case.
SEE OR SEARCH CLASS: D4, Brushware, subclass 108 for tooth
brush combined with case, and subclass 199 for toothbrush storage container.
D9, Packages and Containers for Goods, appropriate subclass for generic disposable packaging for medications.
D24, Medical and Laboratory Equipment, subclass 224 for professionally administered medication, such as chemotherapy or biological specimen container.
203.2 Pill or tablet: This subclass is indented under subclass 203.1. Design for the storage of pellet or wafer type medication.
October 2008
1
D3 - 6 CLASSIFICATION DEFINITIONS October 2008
Example of a design for a storage container for a pill or tablet.
SEE OR SEARCH CLASS: D9, Packages and Containers for Goods,
subclass 339.2 for dispensing type disposable blister package for medication, subclass 339.3 for dial type disposable packaging for medication.
203.3 Compartmented: This subclass is indented under subclass 203.2. Design that shows or has a provision for being divided into plural compartments or areas.
Example of a design for a compartmental storage container for a pill or tablet.
SEE OR SEARCH CLASS: D9, Packages and Containers for Goods,
subclasses 751 through 760 for compartmented disposable packaging for generic compartmented packaging.
203.4 Dial type: This subclass is indented under subclass 203.3. Design that turns, twists or swivels to releaseindividual pill, wafer or tablet of medication.
Example of a design for a dial type storage container for a pill or tablet.
SEE OR SEARCH CLASS: D9, Packages and Containers for Goods,
subclass 339.3 for dial type disposable packaging for medication.
203.5 Tampon or bandage: This subclass is indented under subclass 203.1. Design for container specifically designed for the storage for personal hygiene or absorbent type bandage material.
Example of a design for a storage container for tampon or bandage.
October 2008
October 2008 CLASSIFICATION DEFINITIONS D3 - 7
SEE OR SEARCH CLASS: D9, Packages and Containers for Goods,
subclasses 415 through 499 for box or package.
D24, Medical and Laboratory Equipment, subclass 141 for medical tampon, subclass 189 for bandage. 204
203.6 First aid kit or case: This subclass is indented under subclass 203.1. Design for a storage container for medical arti 205 cles for the care of victims of minor accidents.
SEE OR SEARCH CLASS: D6, Furnishings, subclasses 512 through
574 for generic article support or dispenser.
D24, Medical and Laboratory Equipment, subclasses 107 through 182 for medical tools, per se.
203.7 Medical worker specific: This subclass is indented under subclass 203.6. Design for storage container for medical treatment articles designed for use by a medical technician, nurse or doctor.
206
Example of a design for a first aid kit for a medical worker.
203.8 Diabetic case: This subclass is indented under subclass 203.6. Design for storage container for medical articles for personal care or treatment of diabetes.
207 (1) Note: Includes syringe case.
SEE OR SEARCH THIS CLASS, SUBCLASS:247 through 253 , for wallet.
273 through 302 , for generic enclosed storage containers.
SEE OR SEARCH CLASS: D24, Medical and Laboratory Equipment,
subclass 12 for syringe.
Musical instrument: This subclass is indented under subclass 201. Design for article for music-type device.
Personal grooming article: This subclass is indented under subclass 201. Design for shaving, manicure implement, or personal hygiene.
SEE OR SEARCH CLASS: D4, Brushware, subclass 108 for tooth
brush combined with case and subclass 199 for toothbrush storage container.
D7, Equipment for Preparing or Serving Food or Drink Not Elsewhere Specified, subclass 635 for open-type toothpick holder.
D9, Packages and Containers for Goods, subclass 735 and 736 for razor blade packaging that releases contents sequentially and subclass 748 for packaging for razor.
D28, Cosmetic Products and Toilet Articles, subclasses 56 through 60 for manicure tools; and subclass 61 for manicure rack, stand, tray, or kit.
Writing or marking supplies: This subclass is indented under subclass 201. Design for articles for manually held device for written communication or drawing.
(1) Note. Includes pencil box, crayon carrier, and the like.
SEE OR SEARCH CLASS: D19, Office Supplies; Artists’ and Teach
ers’ Materials, subclasses 41 through 51 for marking instrument.
Key holder, chain, or case: This subclass is indented under subclass 201. Design for storage container for article used to lock or unlock something, or series of connected links or fob for said article.
October 2008
1
D3 - 8 CLASSIFICATION DEFINITIONS October 2008
208 Combined with diverse article: 213 This subclass is indented under subclass 207. Design combined with an article normally not associated with this subject and, if disclosed separately, would be proper subject matter for a subsequent subclass or design patent class.
(1) Note. Excludes key holder, etc. combined with flash drive.
214 SEE OR SEARCH CLASS: D14, Recording, Communication, or Infor
mation Retrieval Equipment, subclass 480.3 for flash drive combined with key holder, chair or case. 215
209 Light: This subclass is indented under subclass 208. Design combined with a lamp.
SEE OR SEARCH CLASS: D26, Lighting, subclasses 37 through 50
for hand-held or body-attached light.
210 Tool: This subclass is indented under subclass 208. Design combined with a mechanical-type instrument.
SEE OR SEARCH CLASS: D8, Tools and Hardware, subclasses 1
through 106 for tool. D13, Equipment for Production, Distribu
tion, or Transformation of Energy, subclass 168 for remote control.
D21, Games, Toys, and Sports Goods, subclasses 793 through 795 for golf-type tool.
211 Simulative: 216 This subclass is indented under subclass 207. Design that includes an ornamental feature or features that simulate the ornamental appearance of another article either as applied ornamentation or form.
212 Case: This subclass is indented under subclass 207. Design for an enclosed or substantially enclosed storage-type container.
Child carrier: This subclass is indented under subclass 201. Design for transporting infant or toddler by body means.
SEE OR SEARCH CLASS: D30, Animal Husbandry, subclass 109 for
animal carrier.
Backpack or sling type: This subclass is indented under subclass 213. Design that attaches or straps to the human or animal back or shoulder.
Attachable to body, apparel, or belt: This subclass is indented under subclass 201. Design that attaches to the human body, clothing, or strip worn around the waist.
SEE OR SEARCH THIS CLASS, SUBCLASS: 232 through 246, for shoulder-supported
handbag or purse.
SEE OR SEARCH CLASS: D2, Apparel and Haberdashery, subclass
614 for glove or hand covering combined with purse or pouch, subclass 905 for athletic shoe combined with pocket, subclass 864 for apron-type tool, and subclass 839 for vest- or jacket- type multiple holder (e.g., fisherman’s - or photographer’s-type vest).
D27, Tobacco and Smokers’ Supplies, subclass 185 for tobacco pouch and subclasses 186-192 for tobacco case or receptacle.
Backpack type: This subclass is indented under subclass 215. Design that attaches to the human or animal back with straps.
SEE OR SEARCH THIS CLASS, SUBCLASS: 214, for backpack carrier for supporting a
child.
SEE OR SEARCH CLASS: D29, Equipment for Safety, Protection, and
Rescue, subclasses 101.1 through 101.4 for harness-type carrier.
October 2008
October 2008 CLASSIFICATION DEFINITIONS D3 - 9
217 Fully enclosed: This subclass is indented under subclass 216. Design wherein all compartments are completely closed or covered.
218 Audio or communications equipment: This subclass is indented under subclass 215. Design for listening or communication devices.
219 Optical article: This subclass is indented under subclass 215. Design for vision enhancing device. 222
(1) Note. Includes case for camera, eyeglass, binoculars, or telescope.
SEE OR SEARCH THIS CLASS, SUBCLASS: 263, for optical article case supported by
shoulder strap. 264, for contact lens or eyeglass case. 223 265, and indented subclass, for eyeglass
case or holder.
SEE OR SEARCH CLASS: D2, Apparel and Haberdashery, subclass
866 for headwear (e.g., hat) combined with glasses. 224
D16, Photography and Optical Equipment, subclass 339 for sling-type eyeglasses attached-type retainer.
220 Scabbard or sheath for cutting implement or sword: This subclass is indented under subclass 215. Design for cutting implement such as saber, dagger, or hunting knife.
SEE OR SEARCH CLASS: D22, Arms, Pyrotechnics, Hunting and
Fishing Equipment, subclass 118 for 225 sword or hunting knife.
221 Sports equipment or sporting goods: This subclass is indented under subclass 215. Design for athletic-type items.
SEE OR SEARCH THIS CLASS, SUBCLASS:255, for golf bag.328.1, for golf bag holder or support.
SEE OR SEARCH CLASS: D2, Apparel and Haberdashery, subclass
905 for athletic shoe combined with pocket.
D6, Furnishings, subclass 552 for wall-mounted or fixed-type rack or holder for sports articles.
D22, Arms, Pyrotechnics, Hunting and Fishing Equipment, subclass 107 for quiver.
Firearm holster: This subclass is indented under subclass 221. Design for gun- or rifle-type holder.
SEE OR SEARCH CLASS: D22, Arms, Pyrotechnics, Hunting and
Fishing Equipment, subclass 104 for pistol.
Simulative: This subclass is indented under subclass 222. Design that includes an ornamental feature or features that simulate the ornamental appearance of another article either as applied ornamentation or form.
Plural repeating pouches, cradles, or receivers: This subclass is indented under subclass 221. Design for identical, multiple holder or slot-type holder.
SEE OR SEARCH CLASS: D2, Apparel and Haberdashery, subclass
864 for apron-type tool and subclass 839 for vest- or jacket-type multiple holder (e.g., fisherman’s- or photographer’s-type vest).
Lid or flap closure: This subclass is indented under subclass 221. Design for holder or an attached top that bends or folds to close.
SEE OR SEARCH THIS CLASS, SUBCLASS: 230, for body attached carrier with lid or
flap closure specific to sport goods or sporting goods.
October 2008
1
D3 - 10 CLASSIFICATION DEFINITIONS October 2008
226 Purse, pouch, or cradle: 231 This subclass is indented under subclass 215. Design that includes an attached or suspended holder.
227 Document sleeve: This subclass is indented under subclass 226. Design that includes a provision for paper doc- 232 ument.
(1) Note. Includes holder for identification card.
SEE OR SEARCH CLASS: D19, Office Supplies; Artists’ and Teach
ers’ Materials, subclasses 86 through 92 for office-type document holder or file.
228 For tool or component thereof: This subclass is indented under subclass 226. Design that includes a provision for manual work equipment or part thereof.
SEE OR SEARCH THIS CLASS, SUB- 233 CLASS: 905, for tool or tackle box cross-reference
art.
SEE OR SEARCH CLASS: D2, Apparel and Haberdashery, subclass
839 for vest or jacket-type multiple holder (e.g., fisherman’s- or photographer’s- type vest) and subclass 864 for apron-type tool.
229 Circular in cross section, or for circular or cylindrical article: This subclass is indented under subclass 226. Design that includes a provision for round or tubular or round in cross section. 234
230 Lid or flap closure: This subclass is indented under subclass 226. Design that includes top that bends or folds a lid to close.
SEE OR SEARCH THIS CLASS, SUB- 235 CLASS: 225, for body-attached holder or carrier for
sports goods with lid or flap closure. 247 through 253, for wallet.
Saddlebags type: This subclass is indented under subclass 201. Design for saddlebags or consisting of a pair of identical or substantially similar connected holders that are intended to be slung or draped over another object or article.
Handbag or purse: This subclass is indented under subclass 201. Design for article designed primarily for women to hold and carry personal effects.
(1) Note. Includes women’s pocketbook, clutch bag, and the like.
SEE OR SEARCH THIS CLASS, SUBCLASS: 276, and indented subclasses for briefcase
or suitcase. 900, cross-reference art collection for
briefcase or portfolio. 901, cross-reference art collection for cos
metic case or tray.
Combined or convertible: This subclass is indented under subclass 232. Design combined with another article that, if disclosed separately, would be proper subject matter for a subsequent subclass or design patent class.
(1) Note. Handbag or purse combined with a mirror or change purse is excluded from this subclass.
SEE OR SEARCH CLASS: D2, Apparel and Haberdashery, subclass
614 for glove or hand covering combined with pouch or purse.
Simulative: This subclass is indented under subclass 232. Design that includes an ornamental feature or features that simulate the ornamental appearance of another article either as applied ornamentation or in form.
Animate: This subclass is indented under subclass 235. Design that includes an ornamental feature or features that simulate the ornamental appearance of an animal, or part thereof, either as applied ornamentation or in form.
October 2008
October 2008 CLASSIFICATION DEFINITIONS D3 - 11
(1) Note. The simulation of animal skin or 243 fur only is excluded from this subclass.
236 Humanoid: This subclass is indented under subclass 235. Design that includes an ornamental feature or features that simulate the ornamental appear- 244 ance of a human being, or part thereof, either as applied ornamentation or in form.
237 Plant life: This subclass is indented under subclass 234. Design that includes an ornamental feature or features that simulate the ornamental appear- 245 ance of living organic organism, or part thereof, either as applied ornamentation or in form.
238 In form: This subclass is indented under subclass 234. Design that includes an ornamental feature or 246features that simulate the ornamental three-dimensional form of another object.
(1) Note. An example of pertinent design would be a representation of a three-dimensional motor vehicle or building.
(2) Note. The search for a handbag that sim- 247 ulates the appearance of another article should also include the appropriate design class for the actual article.
239 Pivoted cooperating jaws closure: This subclass is indented under subclass 232. 248 Design that includes symmetrical jaw-type elements that pivot together to close.
240 With bail-type handle or provision therefor: This subclass is indented under subclass 239. Design that includes or provides for a loop-type symmetric holding means. 249
241 Plural: This subclass is indented under subclass 240. Design for a plural bail-type handle.
242 Lid closure: This subclass is indented under subclass 232. Design for top-closing means that pivots, coop- 250erates, or bends to fit into a fixed-type opening.
Flap or strap closure: This subclass is indented under subclass 232. Design that includes a top that bends or folds to cover the handbag opening and may extend or drape onto the front thereof.
Drawstring closure: This subclass is indented under subclass 232. Design that includes a closure consisting of a cord or cords threaded through the handbag or purse structure that can be pulled to close an opening.
Longitudinal central opening: This subclass is indented under subclass 232. Design that includes an opening across the length of the design.
(1) Note. Includes zipper-type closure.
With handle or provision therefor: This subclass is indented under subclass 245. Design that includes a separate pull-type handle or provision therefor.
(1) Note. A zipper-type pull or decorative tassel is not considered a handle.
Wallet, card, or checkbook holder: This subclass is indented under subclass 201. Design for currency, money, or identification-type document including monitory documents or receipts.
Simulative: This subclass is indented under subclass 247. Design that includes an ornamental feature or features that simulate the ornamental appearance of another article either as applied ornamentation or in form.
Combined with diverse article: This subclass is indented under subclass 247. Design that is combined with an article not normally associated with this subject and, if disclosed separately, would be proper subject matter for a subsequent subclass or design patent class.
Provision for paper money: This subclass is indented under subclass 247. Design that includes a provision for paper currency, such as a billfold.
October 2008
1
D3 - 12 CLASSIFICATION DEFINITIONS October 2008
SEE OR SEARCH CLASS: 255 D11, Jewelry, Symbolic Insignia, and Orna
ments, subclass 78.1 for money clip.
251 With snap closure: This subclass is indented under subclass 250. Design that includes a snap fastener or “press stud”.
SEE OR SEARCH CLASS: D8, Tools and Hardware, subclass 382 for
generic snap-type closure. D11, Jewelry, Symbolic Insignia, and Orna
ments, subclass 220 for apparel-type snap closure or fastener.
256 252 With zipper closure:
This subclass is indented under subclass 250. Design that includes a zip-type fastener.
SEE OR SEARCH CLASS: 257 D11, Jewelry, Symbolic Insignia, and Orna
ments, subclass 221 for apparel-type, zipper-type closure.
253 Symmetrical format of pockets or openings: 258 This subclass is indented under subclass 250. Design that includes balanced arrangement or format of pouches or open areas.
254 Sports equipment or sporting goods: 259 This subclass is indented under subclass 201. Design for holding or carrying athletic-type goods.
SEE OR SEARCH THIS CLASS, SUBCLASS: 221 through 225, for body-attached holder
or carrier for sport equipment or sports goods.
273 through 302, for generic-type holder or carrier, which could also be used to hold sports goods or equipment.
904, for a cross-reference art collection directed to accessory case. 260
905, for a cross-reference art collection directed to tool or tackle box.
SEE OR SEARCH CLASS: D6, Furnishings, subclass 552 for furni
ture-type rack specifically designed or designated for the storage of sports equipment.
Golf bag: This subclass is indented under subclass 254. Design for golf club specific-type carrier.
SEE OR SEARCH THIS CLASS, SUBCLASS:259, for open-type golf club carrier.328.1, for golf bag-type holder or support.
SEE OR SEARCH CLASS:D6, Furnishings, subclass 552 for generic
rack for storage of golf clubs.D21, Games, Toys, and Sports Goods, sub
class 796 for golf club holder or stand.
Provision for racket or paddle: This subclass is indented under subclass 254. Design with specific pocket or provision for holding a sport-type hitting or striking device.
Ball: This subclass is indented under subclass 254. Design with specific pocket or provision for holding a spherical sport projectile.
Bowling: This subclass is indented under subclass 257. Design with specific pocket or provision for holding a spherical projectile used to bowl.
Opening carrier or caddy type: This subclass is indented under subclass 254. Design that is substantially unenclosed.
(1) Note. Sport shoe, boot, or skate excluded.
SEE OR SEARCH THIS CLASS, SUBCLASS:259, for open-type golf club carrier.261, for ski, skate, or skateboard carrier.317, for open-type carrier for shoe, boot, or
skate.
Fishing: This subclass is indented under subclass 254. Design for equipment used to catch fish.
(1) Note. Includes creel, rod case, or reel case.
October 2008
October 2008 CLASSIFICATION DEFINITIONS D3 - 13
261
SEE OR SEARCH THIS CLASS, SUBCLASS: 273, and indented subclasses, for generic
accessory-type storage box. 904, for a cross-reference art collection
directed to sports accessory case. 905, for a cross-reference art collection
directed to tool or tackle box.
Ski, slate, or skateboard: This subclass is indented under subclass 254. Design for snow ski, roller, or ice-type skate or skateboard.
265
SEE OR SEARCH THIS CLASS, SUBCLASS: 317, for open carrier for shoe, boot, or
skate. 266
262 Hunting: This subclass is indented under subclass 254. Design for equipment used to hunt animals.
(1) Note. Includes firearm case.
SEE OR SEARCH THIS CLASS, SUBCLASS: 220, for scabbard or sheath for cutting
implement or sword. 221, for firearm holster. 317, for open carrier type.
267
263 Optical equipment: This subclass is indented under subclass 201. Design for equipment to enhance vision or visual perception.
268
SEE OR SEARCH CLASS: D6, Furnishings, subclasses 407 through
635 for transparency storage unit.
264 Contact lens: This subclass is indented under subclass 263. Design for vision enhancing article that directly touches the eye.
269
SEE OR SEARCH THIS CLASS, SUBCLASS: 219, for body or apparel attached-type
optical carrier. 270
SEE OR SEARCH CLASS: D16, Photography and Optical Equipment,
subclasses 134 through 136 for optical-type lens.
D24, Medical and Laboratory Equipment, subclass 218 for contact lens sterilizer.
Eyeglasses: This subclass is indented under subclass 263. Design for spectacles.
SEE OR SEARCH CLASS: D12, Transportation, subclass 417 for vehi
cle visor-attached-type eyeglass holder.
Holder type: This subclass is indented under subclass 265. Design for open-type eyeglass case or similar article.
SEE OR SEARCH CLASS: D12, Transportation, subclass 417 for vehi
cle visor-attached type.
Camera, projector, or binoculars: This subclass is indented under subclass 263. Design for holding a small mechanical equipment that records or enlarges visual images.
(1) Note. Includes camera, projector, or binocular.
With carrying handle: This subclass is indented under subclass 267. Design that includes a handle member.
SEE OR SEARCH CLASS: D8, Tools and Hardware, for digests
directed to handle configurations.
Exterior conforming to contents: This subclass is indented under subclass 201. Design for outside configuration that conforms to the general shape or form of the article enclosed.
Simulative: This subclass is indented under subclass 201. Design that includes an ornamental feature or features that simulate the ornamental appear-
October 2008
1
D3 - 14 CLASSIFICATION DEFINITIONS October 2008
ance of another object either as applied ornamentation or in three-dimentional form.
(1) Note. The search for a case or carrier that simulates the appearance of another object should also include the appropriate Design Class and subclass(es) for the actual object.
271.1 In form: This subclass is indented under subclass 270. Design that includes an ornamental feature or features that simulate the ornamental appearance in three-dimensional form.
Example of a design for a storage container that is simulative in form.
271.11 Vehicle: This subclass is indented under subclass 271.1. Design that is a representation of a mechanical means of transportation.
Example of a design for a storage container that simulates a vehicle.
SEE OR SEARCH CLASS: D9, Packages and Containers for Goods,
subclasses 672 through 678 for disposable packaging that simulate a vehicle.
D12, Transportation, appropriate subclasses for mechanical vehicles and parts thereof.
D21, Games, Toys, and Sports Goods, subclasses 424 through 452 for riding toy; subclasses 533-560 for toys that simulate vehicles.
D34, Material or Article Handling Equipment, subclasses 12 through 26 for cart.
271.12 Wheeled: This subclass is indented under subclass 271.11. Design that is a representation of a mechanical means of transportation that shows wheel member or members.
Example of a design for a storage container that simulates a wheeled vehicle.
(1) Note: Includes wheel.
SEE OR SEARCH CLASS: D9, Packages and Containers for Goods,
subclasses 675 through 677 for disposable packaging that simulate a wheeled vehicle.
D12, Transportation, subclasses 82 through 129 for wheeled mechanical vehicles; subclasses 500-603 for tires.
D21, Games, Toys, and Sports Goods, subclasses 424 through 452 for riding toy; subclasses 533-560 for toys that simulate vehicles.
October 2008
October 2008 CLASSIFICATION DEFINITIONS D3 - 15
D34, Material or Article Handling Equipment, subclasses 12 through 26 for cart or dolly; subclass 28 for forklift.
271.2 Animal: This subclass is indented under subclass 271.1. Design that is a representation of a living organism such as a mammal.
Example of a design for a storage container that simulates an animal.
(1) Note: Includes egg.
SEE OR SEARCH CLASS: D9, Packages and Containers for Goods,
subclasses 601 through 613 for disposable packaging that simulates an animal.
D21, Games, Toys, and Sports Goods, subclasses 576 through 657 for toy stuffed animal.
271.3 Humanoid: This subclass is indented under subclass 271.2. Design that is a representation of a human being or part thereof.
Example of a design for a storage container that simulates a human being.
SEE OR SEARCH CLASS: D9, Packages and Containers for Goods,
subclasses 614 through 628 for disposable packaging that simulates a human being.
D21, Games, Toys, and Sports Goods, subclasses 585 through 648 for toy doll or toy that simulates a human being.
271.4 Apparel: This subclass is indented under subclass 271.1. Design that is a representation of clothing.
Example of a design for a storage container that simulates apparel.
(1) Note: Includes storage containers that simulate the form of a hat, helmet, umbrella or other clothing type accessory.
SEE OR SEARCH CLASS: D2, Apparel and Haberdashery, sub
classes 728 through 859 for apparel; subclasses 865-889 for headwear; subclasses 896-945 for footwear.
D29, Equipment for Safety, Protection, and Rescue, subclasses 102 through 107 for protective head covering such as helmet.
271.5 Book: This subclass is indented under subclass 271.1. Design that is a representation of a bound literary work or assembled printed material.
October 2008
1
D3 - 16 CLASSIFICATION DEFINITIONS October 2008
Example of a design for container that simulates a book.
SEE OR SEARCH CLASS: D6, Furnishings, subclasses 632 through
635 for audio-visual storage container.
D9, Packages and Containers for Goods, subclass 634 for disposable packaging that simulates a book.
D19, Office Supplies; Artists’ And Teachers’ Materials, subclasses 86 through 92 for office type paper or document holders.
271.6 Building: This subclass is indented under subclass 271.1. Design that is a representation of a permanent inhabitable structure.
Example of a design for a storage container that simulates a building.
SEE OR SEARCH CLASS: D9, Packages and Containers for Goods,
subclasses 636 through 641 for disposable packaging that simulate a building or structure.
D21, Games, Toys, and Sports Goods, subclasses 506 through 511 for a toy building.
D25, Building Units and Construction Elements, subclasses 1 through 34 for building or structure.
271.7 Furniture: This subclass is indented under subclass 271.1. Design that is a representation of furnishings for a habitable room, building or similar structure.
Example of a design for a storage container that simulates furniture.
(1) Note: Includes trunk and cabinet type musical instruments such as piano or organ.
SEE OR SEARCH CLASS: D6, Furnishings, appropriate subclasses
for designs for household and office furniture.
D9, Packages and Containers for Goods, subclass 642 for disposable packaging that simulates furniture.
D21, Games, Toys, and Sports Goods, subclasses 519 through 522 for toy furniture.
271.8 Plant: This subclass is indented under subclass 271.1. Design that is a representation of organic life cultivated for flowers or foliage.
October 2008
October 2008 CLASSIFICATION DEFINITIONS D3 - 17
Example of a design for a storage that simulates a plant. 272
SEE OR SEARCH CLASS: D9, Packages and Containers for Goods,
subclasses 655 through 664 for disposable packaging that simulate a plant or flower.
D11, Jewelry, Symbolic Insignia, and Ornaments, subclasses 117 through 120 for artificial plants and flowers.
D21, Games, Toys, and Sports Goods, subclass 496 for toy building block that simulates a plant of part thereof.
273 271.9 Sports Goods:
This subclass is indented under subclass 271.1. Design that is a representation of items for the playing of an organized sport or sports equip- 274 ment.
275
276
277 Example of a design for a storage container that simulates sports goods.
(1) Note: Sports apparel excluded.
SEE OR SEARCH THIS CLASS, SUBCLASS: 271.4, for container simulating sport type
apparel including hat, helmet or footwear.
SEE OR SEARCH CLASS: D7, Equipment For Preparing or Serving
Food or Drink Not Elsewhere Specified, subclass 901, for simulative sport ball collection.
D21, Games, Toys, and Sports Goods, subclasses 698 through 810 for sports equipment.
Trunk or shipping container type: This subclass is indented under subclass 201. Design for industrial or transportation-type container.
(1) Note. Includes steamer-type trunk or packing crate.
SEE OR SEARCH THIS CLASS, SUBCLASS:304 through 314, for open-top bin or tray.
Enclosed: This subclass is indented under subclass 201. Design that fully surrounds and covers content.
Combined with diverse article: This subclass is indented under subclass 273. Design combined with an article not associated with this subject matter and, if disclosed separately, would be proper subject matter for a subsequent subclass or design patent class.
Mirror: This subclass is indented under subclass 274. Design combined with a reflective surface for use or viewing.
With carrying handle or provision therefor: This subclass is indented under subclass 273. Design that includes a handle or the provision therefor.
Wickerwork: This subclass is indented under subclass 276. Design fabricated in whole or in part of wicker-type material or shows a heavy woven texture.
October 2008
1
D3 - 18 CLASSIFICATION DEFINITIONS October 2008
278 Provision for hanging garment: 286 This subclass is indented under subclass 276. Design that includes a provision for protecting a garment suspended by a hanger.
SEE OR SEARCH THIS CLASS, SUBCLASS:272, for steamer-type trunk.
287 279 Wheeled:
This subclass is indented under subclass 276. Design that includes wheel members.
280 Horizontally divided and separated at base: This subclass is indented under subclass 276. Design that includes a structure with a large separable top that attaches and divides at a bottom member or portion.
288 (1) Note. Includes sewing machine case.
281 Recessed handle: This subclass is indented under subclass 276. Design that includes a depression for holding the handle member or members when in an 289 unused or storage condition.
282 Molded integral handle: This subclass is indented under subclass 276. Design that includes a handle member that is integrally fabricated with the body of the design.
283 Plural compartment: 290 This subclass is indented under subclass 276. Design that includes visible, plural sections or holders located on either interior or exterior portions of the design.
291 284 Interior:
This subclass is indented under subclass 283. Design that includes compartments on the inside only.
285 With zipper closure: 292 This subclass is indented under subclass 284. Design that includes a zip-type fastener.
SEE OR SEARCH CLASS: D11, Jewelry, Symbolic Insignia, and Orna
ments, subclass 221 for zipper-type closure for apparel.
Symmetrically arranged: This subclass is indented under subclass 283. Design that includes visible, plural compartments on the exterior or interior arranged in a balanced configuration where one side of the design is substantially a mirror image of the other.
With shoulder strap: This subclass is indented under subclass 283. Design that includes strip for placement between the neck and the arm.
SEE OR SEARCH THIS CLASS, SUBCLASS: 327, for shoulder strap-type element or
attachment.
Plural panels forming closure: This subclass is indented under subclass 276. Design that includes more than one flat member that bends or folds together to open or close.
Zipper closure: This subclass is indented under subclass 276. Design that includes a zip-type fastener.
SEE OR SEARCH CLASS: D11, Jewelry, Symbolic Insignia, and Orna
ments, subclass 221 for zipper-type closure for apparel.
Flap or strap closure: This subclass is indented under subclass 276. Design that includes a top that bends or folds a lid to close.
Handle centered on lid: This subclass is indented under subclass 276. Design that includes a handle mounted and placed on the lid or top at the center of the design.
Pivoted cooperating jaws closure: This subclass is indented under subclass 276. Design that includes a clamshell-type closure that is substantially symmetric.
October 2008
October 2008 CLASSIFICATION DEFINITIONS D3 - 19
SEE OR SEARCH CLASS: D7, Equipment for Preparing or Serving
Food or Drink Not Elsewhere Specified, subclasses 709 and 710 for lunch box or basket.
293 With exterior hook or hanger: This subclass is indented under subclass 273. 301 Design that includes a curved open-loop member on the outside for hanging.
294 Hinged closure: This subclass is indented under subclass 273. Design that includes a hinge-type closure.
SEE OR SEARCH CLASS: D32, Washing, Cleaning, or Drying 302
Machine, subclass 37 for laundry basket, hamper, or diaper pail.
295 Compartmented or with drawer: This subclass is indented under subclass 294. 303 Design that includes compartments or sliding-type compartment.
296 Drawer: This subclass is indented under subclass 295. Design that includes a sliding-type compartment only.
297 With drawer: This subclass is indented under subclass 273. Design that includes a sliding-type compartment. 304
(1) Note. Subject matter in this subclass includes a compartment and/or a drawer or drawers. 305
298 Sliding closure: This subclass is indented under subclass 273. Design that includes a slide-type lid or top.
299 Folding or roll-up type, or with flap closure: 306 This subclass is indented under subclass 273. Design that is designed to bend or roll over itself to close.
300 Sleeve type: This subclass is indented under subclass 273. Design that opens and the small end of an elongated container.
SEE OR SEARCH THIS CLASS, SUBCLASS: 227, for carrier attachable to the body or
apparel or belt that includes a pouch or cradle designed as a document sleeve.
Zipper closure: This subclass is indented under subclass 273. Design that includes a zip-type fastener.
SEE OR SEARCH CLASS: D11, Jewelry, Symbolic Insignia, and Orna
ments, subclass 221 for apparel-type, zipper-type closure.
Separable closure: This subclass is indented under subclass 273. Design that includes lid and base members that completely separate from one another.
Pocket or pouch: This subclass is indented under subclass 201. Design that is open at one end.
(1) Note. Includes shopping tote, portfolio, and envelope type.
SEE OR SEARCH CLASS: D19, Office Supplies; Artists’ and Teach
ers’ Materials, subclass 3 for office-type envelope.
Open-top bin, tray, or basket: This subclass is indented under subclass 201. Design for open container.
Collapsible or with provision for adjustment: This subclass is indented under subclass 304. Design that has a provision for adjusting the size or shape.
Wire or woven type: This subclass is indented under subclass 304. Design that shows the appearance or texture of filaments that are lashed together.
SEE OR SEARCH CLASS: D7, Equipment for Preparing or Serving
Food or Drink Not Elsewhere Specified, subclasses 709 and 710 for picnic basket.
October 2008
1
D3 - 20 CLASSIFICATION DEFINITIONS October 2008
D12, Transportation, subclass 407 for basket that attaches to a bicycle.
D32, Washing, Cleaning, or Drying Machine, subclass 37 for laundry basket or hamper.
307 With distinct handle or grip: This subclass is indented under subclass 304. Design that includes a distinct holder or part designed to be held.
308 Centrally disposed: This subclass is indented under subclass 307. Design wherein the handle or grip is centrally placed.
309 Symmetrical on two axes: This subclass is indented under subclass 308. 316 Design that shows a configuration where each side of the design is substantially a mirror image of the others.
317 310 Plural compartment or division:
This subclass is indented under subclass 307. Design that includes more than one section or separation.
311 Symmetrical on two axes: This subclass is indented under subclass 310. Design with a configuration wherein each side of the design is substantially a mirror image of the others. 318
312 Symmetrical on two axes: This subclass is indented under subclass 307. Design wherein each side of the design is substantially a mirror image of the others.
313 Plural compartment or division: This subclass is indented under subclass 304. Design that includes plural sections or separations.
314 Symmetrical on two axes: This subclass is indented under subclass 304. Design wherein the compartments or divisions 319are balanced and one side of the design is substantially a mirror image of the other.
315 Carrier or caddy type: This subclass is indented under subclass 201. Design for hand-held device that is partially open and partially enclosed for holding and transporting small articles.
SEE OR SEARCH THIS CLASS, SUBCLASS: 201, for similar article without a provision
for lifting. 259, for sports equipment-type, open-type
carrier.
SEE OR SEARCH CLASS: D12, Transportation, subclasses 128
through 132 for stretcher. D34, Material or Article Handling Equip
ment, subclasses 12 through 27 for hand cart or dolly; and subclasses 2839 for conveying, lifting, or transferring article.
Cylinder or tank: This subclass is indented under subclass 315. Design for tubular-shaped object.
Shoe, boot, or skate: This subclass is indented under subclass 315. Design for footwear including athletic-typeused for skimming.
SEE OR SEARCH THIS CLASS, SUBCLASS:261, for open carrier or caddy for ski,
skate, or skateboard.
Element or attachment: This subclass is indented under subclass 201. Design for element or attachment for carrier or storage container.
SEE OR SEARCH CLASS: D8, Tools and Hardware, for generic-type
fasteners, handles, and supports; and subclass 403 for furniture-type corner protector.
D20, Sales and Advertising Equipment, subclasses 22 through 28 for luggage-type tag.
Compartment, divider, or retainer: This subclass is indented under subclass 318. Design for receiver or partition.
(1) Note. Receiver may be attached either to the outside or the inside of a design.
October 2008
October 2008 CLASSIFICATION DEFINITIONS D3 - 21
320 Golf bag type: 324 This subclass is indented under subclass 319. Design for receiver or partition specific to golf bag.
321 Shell, exterior panel, or trim: This subclass is indented under subclass 318. Design for frame, side panel, or ornament.
(1) Note. Includes cover. 325
322 Appliqué, trim band, or ornament: This subclass is indented under subclass 321. Design for applied-type ornament or ornamentation.
SEE OR SEARCH CLASS: D2, Apparel and Haberdashery, subclass
895 for ornamental elements directed to headwear and subclass 976 for detachable ornaments directed to footwear.
D5, Textile or Paper Yard Goods; Sheet Material, subclasses 7 through 19 for 326 decorative border designs for textiles or sheet material; subclasses 63-66 for appliqué and medallion.
D6, Furnishings, subclass 581 for tassel. D20, Sales and Advertising Equipment, 327
subclasses 22 through 28 for luggage-type tag.
323 Closure or frame: This subclass is indented under subclass 318. Design for fastener member or structure.
(1) Note. Contains lid for container.
SEE OR SEARCH THIS CLASS, SUBCLASS:322, for appliqué or ornament.326, for lid or flap closure for handbag or
purse.
SEE OR SEARCH CLASS: D8, Tools and Hardware, subclasses 300
through 322 and digests for handles 328 and subclass 330-348 for latch or closing device.
Handbag or purse type: This subclass is indented under subclass 323. Design for element to women’s handbag or purse only.
SEE OR SEARCH THIS CLASS, SUBCLASS: 232 through 246, for handbags which
include various types of closures.
Simulative: This subclass is indented under subclass 324. Design that includes an ornamental feature or features that simulate the ornamental appearance of another object either as applied ornamentation or in form.
(1) Note. The search for a handle for a handbag that simulates the appearance of another object should also include the appropriate Design Class and subclass(es) for the actual object.
Lid or flap: This subclass is indented under subclass 324. Design for cover specific to handbag or purse that is attached only at one side.
Shoulder strap or carrying harness: This subclass is indented under subclass 318. Design for strip-type or carrying means placed between the neck and arm or on the back.
SEE OR SEARCH CLASS: D8, Tools and Hardware, subclasses 300
through 322 and the digests for handles.
D24, Medical and Laboratory Equipment, subclasses 190 through 192 for medical-type body restraint or guard.
D29, Equipment for Safety, Protection, and Rescue, subclasses 101.1 through 101.4 for body-type harness.
D30, Animal Husbandry, subclasses 151 through 153 for animal restrainer.
Holder or support: This subclass is indented under subclass 318. Design for hanger or holder.
(1) Note. Includes hook.
October 2008
1
D3 - 22 CLASSIFICATION DEFINITIONS October 2008
SEE OR SEARCH CLASS: D8, Tools and Hardware, subclasses 367
through 372 for generic-type hooks.
328.1 Golf bag type: This subclass is indented under subclass 328. Design for a holder specific to golf bag.
SEE OR SEARCH CLASS: D21, Games, Toys, and Sports Goods, sub
class 796 for golf club holder or stand.
329 Glove holder: This subclass is indented under subclass 318. Design for support for hand coverings, such as mittens or gloves.
CROSS-REFERENCE ART COLLECTIONS
900 BRIEFCASE OR PORTFOLIO: This subclass is indented under the class definition. Subject matter under this cross-reference art collection is a collection of design and utility patent cross references that are titled or show designs for document-type briefcases or document portfolios. Since this subject matter varies widely in both scope and appearance, it does not lend itself to a classic array of subclasses.
901 COSMETIC CASE OR TRAY: This subclass is indented under the class definition. Subject matter under this cross-reference art collection is a collection of design and utility patent cross references that are titled or show designs intended to hold or carry cosmetics. Since this subject matter varies widely in both scope and appearance, it does not lend itself to a classic array of subclasses.
SEE OR SEARCH CLASS: D28, Cosmetic Products and Toilet Arti
cles, subclasses 73 through 91.1 for holders for cosmetic products that might set atop a cosmetic or dressing tray in normal use.
902 EXPANDABLE SUITCASE OR CARRIER: This subclass is indented under the class definition. Subject matter under this cross-reference art collection is a collection of design and utility patent cross references that are titled or
show designs for suitcase or apparel carriers which are designed to enlarge and contract in size. Since this subject matter varies widely in scope and appearance, it does not lend itself to a classic array of subclasses.
903 JEWELRY OR TABLEWARE CASE: This subclass is indented under the class definition. Subject matter under this cross-reference art collection is a collection of design and utility patent cross references that are titled or show designs for articles for personal adornment, or flatware holders or storage containers. Since this subject matter varies widely in scope and appearance, it does not lend itself to a classic array of subclasses.
904 SPORTS ACCESSORY CASE: This subclass is indented under the class definition. Subject matter under this cross-reference art collection is a collection of design and utility patent cross references that are titled or show designs for storage or carrying containers designed specifically to hold athletic-type articles. Since this subject matter varies widely in scope and appearance, it does not lend itself to a classic array of subclasses.
905 TOOL OR TACKLE BOX: This subclass is indented under the class definition. Subject matter under this cross-reference art collection is a collection of design and utility patent cross references that are titled or show designs for tool or fishing accessory container. Since this subject matter varies widely in scope and appearance, it does not lend itself to a classic array of subclasses.
END
October 2008