SUBMITTAL NUMBER: 230700-01.01

OCPS CLAY SPRINGS ES SUBMITTAL TRANSMITTAL

SUBMITTAL DETAILS:

REVIEWERS:

SUBJECT: HVAC INSULATION PRODUCT DATA &

SCHEDULE -RESUBMITTED 1 TIME(S)

DATE RECIEVED: Nov 13, 2014

DISCIPLINE: Mechanical

PRIMARY: KEVIN KING

kking@matern.net

TAD RIVENBARK

trivenbark@matern.net

MATERN ENGINEERING

PHN: (407) 740-5020

FAX: (407) 740-0365

MATERN ENGINEERING

PHN: (407) 740-5020

FAX: (407) 740-0365

SECONDARY:

PRIORITY STATUS: 2-STANDARD

REVIEWER DUE DATE: 11/25/2014

SPECIFICATION REF: 23 09 23

DWG REF. NONE

DWG TITLE:

NO OF ITEMS: ITEM DESCRIPTI

REVIEW STATUS:

COMMENTS:

CONTRACTOR/CM:

: WILLIAMS COMPANY: BRAD KUBIN 2301 SILVER STAR RD. ORLANDO, FL, 32809 (407) 295-2530 FAX:(407) 297-0459

REVIEWED

RETURNED ITEMS:

DATE RETURNED TO CM: 11/18/2014

BUILDING REFERENCE:

1 Product Literature(s)

PAGE 1 OF 1RHODES + BRITO ARCHITECTS INC. : 605 E. ROBINSON STREET, SUITE 750 : ORLANDO, FL. : 32801 : 407.648.7288 : FAX.648.7289

cc:

OWNER : CALVIN WOOLFOLK 6501 MAGIC WAY, BLDG. 200 ORLANDO, FL, 32809 (407) 317-3700

FAX:(407) 317-3768

R+B FILE: : 13017-0001.X6

SUBMITTAL NUMBER: 23070001.01

OCPS CLAY SPRINGS ES SUBMITTAL ASSIGNMENT MEMO

SUBMITTAL DETAILS: REVIEWERS:

SUBJECT: HVAC INSULATION PRODUCT DATA

& SCHEDULE -RESUBMITTED 1

TIME(S)

DATE RFI RECIEVED: Nov 13, 2014

DISCIPLINE: Mechanical

PRIMARY: KEVIN KING

kking@matern.net

TAD RIVENBARK

trivenbark@matern.net

MATERN ENGINEERING

PHN: (407) 740-5020FAX: (407) 740-0365

MATERN ENGINEERING

PHN: (407) 740-5020

FAX: (407) 740-0365

SECONDARY:

PRIORITY STATUS: 2-STANDARD

REVIEWER DUE DATE: 11/25/2014

SPECIFICATION REF: 23 09 23

DWG REF. NONE

DWG TITLE:

REVIEW STATUS:

THIS SUBMITTAL IS ISSUED TO YOU FOR YOUR REVIEW. PLEASE RESPOND AND RETURN...WITH THIS COMPLETED SAM TRANSMITTAL...TO MICHELE BUDAY-URDANETA NO LATER THAN: 11/25/2014. PLEASE COMPLETE REVIEW STATUS AT RIGHT

SUBMITTAL CONTENTS:

NO OF ITEMS: ITEM DESCRIPTION

(please print)THIS SUBMITTAL WAS REVIEWED BY :

RE-SUBMIT WITH ITEMS

NOT REVIEWED

REJECTED

REVISE AND RESUBMIT

FURNISHED AS MARKED

REVIEWED

COMMENTS:

1 PRODUCT LITERATURE(S)

cc:

OWNER : CALVIN WOOLFOLK

6501 MAGIC WAY, BLDG. 200

ORLANDO, FL, 32809

R+B FILE: : 13017-0001.X6CONTR/CM: : WILLIAMS COMPANY

: BRAD KUBIN

2301 SILVER STAR RD.

Submittal Approval Form

PROJECT: CLAY SPRINGS ELEMENTARY SCHOOL

DATE: _______________________________________

SUBCONTRACTOR NAME: ________DHR Mechanical Services Inc.______

SUBCONTRATOR ADDRESS: ____801 Central Park Drive Sanford FL. 32771_

NUMBER AND TITLE OF SPECIFICATION SECTION: 23 07 00 HVAC Insulation Product Data & Schedule

Contractor’s Submittal Stamp Architect/ Engineer’s Submittal Stamp

11/13/14

Corporate Office: 130 Candace Drive, Maitland, Florida 32751-3331 Phone: 407.740.5020 Orlando | Fort Myers | Jacksonville | Tampa | www.matern.net

Registered: FLORIDA * GEORGIA* LOUISIANA * NORTH CAROLINA * SOUTH CAROLINA * TEXAS * TENNESSEE * VIRGINIA

SUBMITTAL DATA REVIEW COMMENTS Date: November 18, 2014 Project: OCPS-Clay Springs ES By: J. Walden for Kevin King Submittal: HVAC Insulation

MPE Project No: 2013-224 Data No.: 23 07 00 Submittal No.: 001 Contractor’s I.D.: DHR

Class: Basis of Design (1) Equal (2) Substitution (3)

ACTION CODE X A No exceptions taken. B Make corrections noted. C Revise and Resubmit. D Submit Specified Item. E Rejected. N Review not required.

THE FOLLOWING COMMENTS SHALL BE CONSIDERED AN INTEGRAL PART OF THE SUBMITTAL DATA REVIEW. REVIEW OF THIS DATA IS ONLY FOR CONFORMANCE WITH THE DESIGN CONCEPT AS GIVEN IN THE CONTRACT DOCUMENTS. THE CONTRACTOR IS RESPONSIBLE FOR: QUANTITIES, FUNCTIONS, DIMENSIONS AND COORDINATION OF THE WORK WITH OTHER TRADES. 1.Reviewed with chillers.

END OF SUBMITTAL DATA REVIEW COMMENTS

DUCT INSULATION SCHEDULE

SYSTEM TYPE OF INSULATION THICKNESSVAPOR BARRIER

REQUIREDCONCEALED DUCT INSULATION

Outside air plenums .75# density blanket 2.3" yesOutside air duct .75# density blanket 2.3" yes

SUPPLY AIR DUCTS

After 50 feet downstream of AHU on supply side for all air handling units.

concealed .75 density wrap 2.3" yes

After 50 feet downstream of AHU on supply side for all air handling units.

exposed rigid board with corner angle 1-1/2" yes

RETURN AIR DUCTS

After 50 feet upstream of AHU on supply side for all air handling units.

concealed .75 density wrap 2.3" yes

After 50 feet upstream of AHU on supply side for all air handling units.

exposed rigid board with corner angle 1-1/2" yes

RELIEF & OUTSIDE AIR DUCTS

All relief & outside air ductsconcealed .75 density

wrap 2.3" yes

All relief & outside air ductsexposed rigid board

with corner angle 1-1/2" yes

Kitchen hood exhaust ducts 2 hour fire rated wrap 3" yes

PIPE INSULATION SCHEDULE

SYSTEM TYPE OF INSULATION THICKNESSVAPOR BARRIER

REQUIREDREFRIGERANT PIPING

SUCTION (RS) (TEMP 35 - 45 deg F)CLOSED CELL

ELASTOMERICUp to 2" - 3/4"

2-1/2" thru 4" - 1" yes

RHG (TEMP 90 - 150 deg F)CLOSED CELL

ELASTOMERICUp to 2" - 3/4"

2-1/2" thru 4" - 1" yesCHILLED WATER (40 deg F to 56 deg F)

Chilled water (CHS) (CHR) (42 DEG F & above) - Conditioned

CLOSED CELL ELASTOMERIC

UP TO 2" 1-1/2" CLOSED CELL ELASTOMERIC

YES ALUMINUM JACKET IN CEP OR

EXTERIOR OF BUILDING

Chilled water (CHS) (CHR) (42 DEG F & above) - Conditioned FOAMGLAS

2-1/2" THRU 4" - 1-1/2" 5" THRU 8 - 2"

10" & LARGER - 2-1/2"

YES ALUMINUM JACKET IN CEP OR

EXTERIOR OF BUILDING

Chilled water (CHS) (CHR) (42 DEG F & above) - Un-Conditioned FOAMGLAS

Up to 2" - 1-1/2" 2-1/2" THRU 4" - 2"

5" THRU 14" - 2-1/2" 16" & LARGER - 2-1/2"

YES ALUMINUM JACKET IN CEP OR

EXTERIOR OF BUILDING

CONDENSATE DRAIN CLOSED CELL

ELASTOMERIC 1/2" YESEQUIPMENT INSULATION

EXPANSION TANKCLOSED CELL

ELASTOMERIC 1" YES

FILTER FEEDER CLOSED CELL

ELASTOMERIC 1" YESCHILLED WATER PUMPS FOAMGLAS 2" REMOVABLE COVER

CHILLERCLOSED CELL

ELASTOMERIC 1-1/2" YESSCREW COMPRESSOR (oil separator& cooler)

CLOSED CELL ELASTOMERIC 1-1/2" YES

CONCEALED DUCT INSULATION

ALLEY WRAP™ glass mineral wool blanket insulation is a thermal and acoustical insulation product made from highly resilent, inorganic glass fibers bonded by a thermosetting resin. It is available unfaced or with a multi-purpose foil-scrim kraft (FSK) jacket and with a white metalized polypropylene scrim-kraft (PSK) jacket. Vapor retarders have a 2” (51mm) stapling flange on one edge, and the factory-applied facing assures uniform quality.

USESManson ALLEY WRAP™ is used as an external insulation on commerical or residential heating or air conditioning ducts. It is suitable for the exterior of rectangular or round sheet metal ducts and spaces, or surfaces where temperature and condensation must be controlled.

AVAILABILITYManufactured dimensions are listed in the Manson Insulation product catalog.

ALLEY WRAP™

Temperature Limit: UNFACED: 350°F (177°C) | FACED: 250°C 121°C)

Manson Insulation Products Ltd.4805 Lapiniere Blvd, Suite 3000Brossard, QC J4Z 0G2 CanadaTelephone : (800)-626-7661Fax: (450)-443-0042www.imanson.com

CONTRACTOR:

DATE:

JOB NAME:

SPEcIfIcATIon coMPLIAncEASTM C 553• Type I, II, III

ASTM C 1136 • Type II

ASTM C 1290

California Title 24 (installed at 25% compression)

HH-I-558C• Form B, Type I, Class 7

NFPA 90A and 90B

NRC Reg. Guide 1.36

City of New York MEA 325-83-M

In Canada• CAN/ULC S102-M88• CAN/CGSB 51.5m; Type II (FSK facing)• CAN/CGSB 51. 11-92

PRoDUcT fEATURESGreenguard Certification• Greenguard GOLD certified for superior indoor air quality performance• Over 50% post-consumer recycled glass

EUCEB• This product is tested and certified to meet EUCEB requirements.

Surface Burning Characteristics• UL/ULC Classified FCH 25/50 (FSK, unfaced) • Unfaced and FSK wrap have a Flame Spread 25 and Smoke Delvelopped 50 when tested in accordance with ASTM E 84,

CAN/ULC S102-M88, NFPA 55 and UL 723 PSK wrap has a Flame Spread 25 and Smoke Developed 50 when tested in accordance with ASTM E 84

Temperature Range (ASTM C 411)• Faced, can be used on ducts operating up to 250°F (121°C)• Unfaced, up to 350°F (177°C)

Water Vapor Permeance (ASTM E 96, Procedure A)• FSK and white PSK facings have maximum water vapor permeance of .02 perms

Water Vapor Sorption (ASTM C 1104)• Less than 5% by weight when tested for 96 hours at 120°F (49°C) and 95% relative humidity

Corrosiveness (ASTM C 665)• Will not accelerate corrosion of a steel panel compared to sterile cotton

Mold Growth (ASTM C 1338)• No growth

Puncture Resistance (TAPPI Test T803) (Beach Units)• FSK and PSK: 25

Ac

oU

ST

IcA

L P

ER

foR

MA

nc

E

InSERTIon LoSS

(Reduction of Sound Transmitted Through Duct Wrap)(Sound and Vibration Design and Analysis, national Environmental Balancing Bureau, 1944)

DUcT WRAP InSERTIon LoSS, dB

DUcT DIMEnSIonS

SHEETMETAL

noMInALTHIcKnESS

noMInAL DEnSITY

63Hz 125Hz 250Hz 500Hz 1000Hz 2000Hz 4000Hz

12” X 12” (305mm x 305mm) 24 GA 1.5” (38mm) 0.75PCF (12kg/m3) 0.6 0.6 0.6 0.7 7.4 14.2 20.9

24” X 12” (610mm x 305mm) 24 GA 1.5” (38mm) 0.75PCF (12kg/m3) 0.6 0.6 0.6 0.7 7.4 14.2 20.9

48” X 12” (1219mm x 305mm)

22 GA 1.5” (38mm) 0.75PCF (12kg/m3) 0.6 0.5 0.5 0.6 7.4 14.1 20.9

24” X 24” (610mm x 610mm) 22 GA 1.5” (38mm) 0.75PCF (12kg/m3) 0.6 0.5 0.5 0.6 7.4 14.1 20.9

24” X 12” (610mm x 305mm) 26 GA 1.5” (38mm) 0.75PCF (12kg/m3) 0.8 0.8 0.8 0.8 7.5 14.2 21.0

24” X 8” (610mm x 203mm) 26 GA 2” (51mm) 0.75PCF (12kg/m3) 1.0 1.0 1.0 3.6 10.4 17.1 23.9

TH

ER

MA

L P

ER

foR

MA

nc

E (A

ST

M c

177

)

THERMAL EffIcIEncY

MEAnTEMPERATURE

0.75 Pcf (12Kg/m3) 1.0 Pcf (16Kg/m3) 1.5 Pcf (24Kg/m3)

k k (SI) k k (SI) k k (SI)

5O°F (10°C) 0.28 0.040 0.26 0.037 0.23 0.033

75°F (24°C) 0.29 0.042 0.27 0.039 0.24 0.035

10O°F (38°C) 0.31 0.045 0.29 0.042 0.26 0.037

125°F (52°C) 0.33 0.048 0.31 0.045 0.28 0.040

15O°F (66°C) 0.36 0.052 0.34 0.049 0.31 0.045

175°F (80°C) 0.39 0.056 0.37 0.053 0.33 0.048

200°F (93°C) 0.43 0.063 0.40 0.058 0.36 0.052

fSK

fo

ILE

D f

Ac

ED

DEnSITY THIcKnESS WIDTH LEnGTH R-VALUE R-VALUE(InSTALLED)

0.75PCF (12kg/m3)

1 1/2”

48”

100’ R 5.1 R 4.2

2” 75’ R 6.8 R 5.6

2 3/16” 75’ R 7.4 R 6.0

2 1/2” 75’ R 8.5 R 7.0

3” 50’ R 10.2 R 8.4

1.0PCF (16kg/m3)

1 1/2” 100’ R 5.6 R 4.5

2” 75’ R 7.4 R 6.0

1.5PCF (24kg/m3)

1 1/2” 75’ R 6.1 R 4.8

2” 50’ R 8.2 R 6.4

noTESThe chemical physical properties of Manson Alley Wrap™ blanket insulation represent typical average values determined in accordance with accepted test methods. The data is subject to normal manufacturing and testing variations. The data is supplied as a technical service and is subject to change without notice. References to numerical flame spread ratings are not intended to reflect hazards presented by these or any other materials under actual fire conditions.

Check with your Manson Territory Manager to assure information is current.

GLASS MInERAL WooL AnD MoLDGlass mineral wool insulation will not sus-tain mold growth. However, mold can grow on almost any material when it becomes wet and contaminated.Carefully inspect any insulation that has been exposed to water. If it shows any sign of mold, it must be discarded. If the material is wet but shows no evidence of mold, it should be dried rapidly and thoroughly. If it shows signs of facing degradation from wetting, it should be replaced.Air handling insulation used in the air stream must be discarded if exposed to water.

ALLEY WRAP™

Temperature Limit: UNFACED: 350°F (177°C) | FACED: 250°C 121°C)

03/2014MADE In THE USA

M-CI-DW-DS

Application• Install Manson Insulation Alley Wrap™ with facing to the outside to obtain specified R-value using a maximum of 25% compression.

• Butt all insulation joints firmly together. Longitudinal seam of the vapor retarder must be overlapped a minimum of 2" (51 mm). A 2" (51 mm) tab is provided for the circumferential seam and must be overlapped.

• Where vapor retarder performance is necessary, all penetrations, joints, seams and damage to the facing should be sealed with an FSK, PSK or foil tape or glass fabric and mastic prior to system startup.

• Pressure sensitive tapes should be a minimum 3" (76 mm) wide and be applied with moving pressure using an appropriate sealing tool. Staples should be outward clinch and placed approximately 6" (152 mm) on centre.

• Closure systems should have a 25/50 F.H.C. per UL 723.

• For rectangular ducts over 24" (610 mm) wide, secure the insulation to the bottom side of the duct with mechanical fasteners spaced on 18" (457 mm) centers to reduce sag. Care should be taken to avoid over compressing the insulation with the retaining washer.

• It is neither necessary nor desirable to adhere Alley Wrap™ to duct surfaces with adhesive.

• Unfaced Alley Wrap™ should be overlapped with a minimum of 2” (51 mm) and fastened with 4” (102 mm) to 6” (152mm) nails or skewers placed 4” (102 mm) apart, or secured with a wire or banding system. Care must be taken to avoid damaging the Alley Wrap™. Refer to diagram for staple stitching and butt-joint method.

Installation Procedures• Use the table (below) to determine stretch-outs required for the nominal thickness of insulation to limit average compression of the

insulation 25% or less.

Application & Specification GuidelinesStorage• Protect stored insulation from water damage,

construction damage and other abuse.• If stored outside, proper protection from

weather conditions should be provided.Preparation• Install Manson Insulation Alley Wrap™ over clean,

dry sheet metal ducts.

• All sheet metal joints and seams must be sealed to prevent air leakage from the duct.

LabeledThickness

Installedcompressed

Thickness Round Square Rectangular

11/2" (38 mm) 11/8" (29 mm) P+91/2" (241 mm) P+8" (203 mm) P+7" (178 mm)

2" (51 mm) 11/2" (38 mm) P+12" (305 mm) P+10" (254 mm) P+8" (203 mm)

23/16" (56 mm) 15/8" (42 mm) P+13" (330 mm) P+11" (279 mm) P+81/2" (216 mm)

21/2" (64 mm) 17/8" (48 mm) P+141/2" (368 mm) P+121/2" (318 mm) P+91/2" (241 mm)

3" (76 mm) 21/4" (57 mm) P+17" (432 mm) P+141/2" (368 mm) P+111/2" (292 mm)

P = Perimeter of duct to be installed.

Application

ALLEY WRAP™

Temperature Limit: UNFACED: 350°F (177°C) | FACED: 250°C 121°C)

03/2014MADE In THE USA

M-CI-DW-DS

Specialty Construction Brands, Inc.

Customer Service 1105 South Frontenac Street Fax 800-231-9541 Aurora, IL 60504 800-942-6856

CP-34 Vapor Retardant Coating

DESCRIPTION CP-34 is a water based vapor retarder coating for use over many types of thermal insulation including polystyrene foam. It is ideal for use over ASJ, FRK and FSK jackets and board facings to give a vapor retarding seal at joints, laps and weld pin punctures. CP-34 is formulated for indoor and outdoor commercial use. It has a mild latex “paint type” odor and is designed for use on pipes, vessels, ducts and equipment operating between 32°F (0°C) and ambient temperatures. CP-34 has a WVTR rating in the range of other competitive water based vapor barrier coatings. For heavier duty commercial or industrial use select Childers CP-35. LIMITATIONS Store and apply between 40°F (4°C) and 100°F (38°C); protect from freezing until dry. Always test foil and paper facings for acceptable adhesion before using. Outdoor horizontal surfaces must always drain completely. A pitch of at least 1/2 inch per foot (4 cm/m) is required. To resist rain washoff, allow at least 16 hours drying time above 50°F (10°C), with a relative humidity of 50%. Higher humidity and/or lower temperature may retard drying. CERTIFIED • Meets NFPA Standard 90-A and 90-B 25/50 requirements

when used to seal seams and punctures in vapor barrier facings and jacketing.

• This product has been tested according to ASTM E-84 (Surface Burning Characteristics of Building Materials).

• Meets requirements for LEED IEQ 4.2 Low-Emitting Materials, Paints and Coatings. VOC: 34 g/l, less water and exempt solvents.

Visit us on the web at www.fosterproducts.com

COLOR White WET WEIGHT (ASTM D1475) 11.5 lbs. 1.38 kg/liter AVERAGE NON-VOLATILE (ASTM D1644) 48% by volume (62% by weight) SERVICE TEMPERATURE LIMITS (FSTM 70) (Temperature at coated surface.) -20°F to 180°F -29°C to 82°C DRYING TIME (23°C) 50% RH (ASTM D1640) To Touch–4 hours Through–24 hours COVERAGE (FSTM 71) (Subject to the surface being coated.) Wet coverages shown below are for smooth non-porous surfaces. Porous or rough surfaces will require higher gallonage to attain required dry thickness. 4 gallons/100 sq. ft. (1.6 l/sq. m) .064 in. wet thickness (1.6 mm). WATER VAPOR PERMEANCE ASTM F 1249, 0.08 perms at 45 mils dry. Tested at 100°F (38°C) and 50% RH. WET FLAMMABILITY (ASTM D3278) Flash Point: None to boiling, 212°F (100°C) SURFACE BURNING CHARACTERISTICS (ASTM E-84) Flame Spread 15 Smoke Develop 35 Surface Inorganic reinforced cement board Number of Coats 1 Coverage 25 sq. ft/gal. Applied in a 4 inch wide strip. Flash Point of liquid coating, closed cup: No flash to boiling.

0908

DS CP34 R0908

Suggested Specifications

CP-34 Vapor Retardant Coating

Suggested Specifications . . . for vapor sealing insulation on low temperature equipment, chilled water or refrigerated piping and fittings. The insulation on all piping, fittings, and equipment shall be vapor sealed with Childers® CP-34 Vapor Retarder Coating. The first coat shall be a tack coat applied at a coverage rate of 2 U.S. gals./100 sq. ft. (0.8 l/sq. m). While still wet a layer of CHIL-GLAS® #10 Glass Fiber Reinforcing Mesh shall be embedded, with all seams overlapped a minimum of 2" (5.08cm). A finish coat at a coverage rate of 2 U.S. gals./100 sq. ft. (0.8 l/sq. m) shall be applied so that the total wet film thickness is a minimum of 0.064". This will provide a minimum dry film thickness of 0.032". All fibrous glass (or other) insulation shall be applied with CHIL-GRIP™ CP-124 Adhesive. The adhesive shall be spray-applied to the duct work at a maximum coverage of 400 sq. ft. per gallon (9.8 sq. m/liter), and full coverage shall be given to the metal.

NOTES TO SPECIFYING ENGINEER 1. Childers® CP-34 Vapor Retarder Coating is white in color and should be specified where white All Service Jacketing (ASJ), canvas, or other white coatings/finishings are specified on the adjoining pipe or equipment insulation. 2. Do not use over copper clad wire. 3. All horizontal surfaces must be sloped at least 1/2 inch per foot (4 cm/m) to assure water run-off and prevent the ponding of rain water and melting snow or ice.

Application Guide and Suggested Procedures 1. USE OF MATERIAL Stir well. DO NOT THIN. Apply only to clean, dry, oil-free surfaces. Keep container closed when not in use. 2. APPLICATION – INDOOR AND LIGHT DUTY OUTDOOR To prevent water vapor and moisture infiltration, proper and complete flashing is required. Follow flashing specifications. 1. Apply tack coat of CP-34 Vapor Retarder Coating at 2

gallons per 100 sq. ft. (0.8 l/sq. m). 2. Embed CHIL-GLAS #10 membrane into the wet tack coat.

Smooth membrane to avoid wrinkles and overlap all seams at least two inches (5 cm). Apply finish coat of CP-34 coating, within 1/2 hour of the tack coat application, at 2 gallons per 100 square feet (0.8 l/sq. m).

3. This application shall provide a minimum dry thickness of 31 mils (0.8 mm).

3. BRUSH Use a good brush, suitable for water based paints, making strokes as long as possible over the surface. Apply with full brush and spread out evenly. Do not overwork. 4. SPRAY CP-34 Vapor Retarder Coating may be airless spray applied. For spray equipment information, please consult Airless Spray Recommendations or contact your Spray Equipment Supplier. Average viscosity range: 85,000-110,000 cps. Corrosion resistant pumps and fittings are suggested. 5. CLEAN UP Use fresh water to clean brushes and equipment before product dries. Dry product may be removed with hot soapy water (with ammonia added) or strong solvents such as chlorinated solvent (non-flammable) or xylol (flammable).

CUSTOMER SERVICE: 800-231-9541

IMPORTANT: Specialty Construction Brands, Inc. warrants that each of its products will be manufactured in accordance with the specifications in effect on the date of manufacture. WE MAKE NO OTHER WARRANTIES AND EXPRESSLY DISCLAIM ANY WARRANTIES OF MERCHANTIBILITY OR FITNESS FOR A PARTICULAR PURPOSE. If a product fails to meet this limited warranty, purchaser’s sole and exclusive remedy is replacement of the product or, at our option, refund of the purchase price. OUR ACCEPTANCE OF ANY ORDERS FOR THE PRODUCT IS EXPRESSLY CONDITIONAL UPON PURCHASER’S ASSENT TO THE TERMS ON THE APPLICABLE INVOICE. ADEQUATE TESTS: The information contained herein we believe is correct to the best of our knowledge and tests. The recommendations and suggestions herein are made without guarantee or representation as to results. We recommend that adequate tests be performed by you to determine if this product meets all of your requirements. The warranted shelf life of our products is six months from date of shipment to the original purchaser.

For professional use only. Keep out of reach of children. Consult Material Safety Data Sheet and container label for further information.

EXPOSED DUCT INSULATION

AK BOARD® is a thermal and acoustical insulation product made from inorganic glass fibers preformed intoboards bonded by a thermosetting resin. It is available plain, with a factory applied FSK orAll Service Jacket (ASJ) facings.

USESMANSON AK BOARD® is a versatile product for thermal and acoustical applications such as: heating and airconditioning ducts, power and process equipment, boiler and stack installations, metal and masonry walls,wall and roof panel systems, curtain wall assemblies and cavity walls.

AVAILABILITYManufactured dimensions are listed in the Manson Insulation product catalog.

AK BOARD Fiberglass Thermal & Acoustical Board Insulation

Temperature Limit: 450°F (232°C)

SPECIFICATION COMPLIANCEASTM C 612 Standard specification for mineral fibre board insulation - Type IA (1.6, 2.25, 3.0, 6.0 pcf) (26, 36, 48, 96 kg/m3) - Type IB (3.0, 6.0 pcf) (48, 96 kg/m3)

ASTM C 1136 (facings) :FSK: Type IIASJ: Type I, II

California Title 24

Corrosiveness (ASTM C 665) - Will not accelerate corrosion of aluminum, steel or copper. Puncture Resistance (TAPPI Test T803) (Beach Units) - FSK facings: 25 - ASJ facings: 50

Water Vapor Transmission (ASTM E 96, Procedure A) - FSK & ASJ vapor retarders have a maximum vapor transmission rate of .02 perms.

Water Vapor Sorption (ASTM C 1104) - Less than 5% by weight when exposed to air at 120°F (49°C) and 95% humidity for 96 hours.

Shrinkage (ASTM C 356) - Less than 0.3% linear shrinkage.

Microbial Growth (ASTM C 1338, G-21, G-22) - Does not promote or support the growth of mold, fungi or bacteria.

CGSB 51-GP-10M Canadian Specification for mineral fibre board insulation.

FIRE HAZARD CLASSIFICATION(UL 723, CAN/ULC-S102-M-88, ASTM E84, NFP90A & 90B)Flame Spread Index not exceeding 25 and Smoke DevelopedIndex not exceeding 50.

®

CONTRACTOR:

JOB NAME:

DATE:

Manson Insulation Products Ltd.4805 Lapiniere, Suite 3000Brossard, QC J4Z 0G2 CanadaTelephone : 800.626.7661Fax: 450.443.0042www.imanson.comKEEPING IT SIMPLE.

AK BOARD®

Fiberglass Board InsulationTemperature Limit: 450°F (232°C)

Sound Absorption Coefficients (ASTM C 423, Type A Mounting)

Type Facing Thickness

1/3 Octave Band Center Frequency (cycles/sec.)

125 250 500 1000 2000 4000 NRC

1.6 PCF(26 kg/m3) Plain

1½" (38 mm) .19 .44 .86 .98 1.00 1.02 .802" (51 mm) .31 .57 .96 1.04 1.03 1.03 .902½" (64 mm) .43 .82 1.12 1.07 1.04 1.03 1.003" (76 mm) .47 .92 1.17 1.06 1.06 1.04 1.05

2.25 PCF(36 kg/m3)

Plain1" (25 mm) .05 .24 .59 .86 .97 1.00 .651½" (38 mm) .17 .49 .93 1.03 1.03 .99 .852" (51 mm) .26 .62 1.05 1.07 1.04 1.05 .95

FSK1" (25 mm) .14 .69 .81 .99 .55 .27 .752" (51 mm) .63 .76 1.11 .75 .42 .22 .75

3.0 PCF(48 kg/m3)

Plain

1" (25 mm) .08 .23 .62 .88 .96 .99 .651½" (38 mm) .09 .39 .89 1.03 1.06 1.01 .852" (51 mm) .29 .65 1.11 1.13 1.06 1.03 1.003" (76 mm) .54 1.01 1.18 1.07 1.07 1.04 1.104" (102 mm) .95 1.11 1.17 1.07 1.07 1.06 1.10

FSK1" (25 mm) .21 .63 .84 .93 .51 .22 .751½" (38 mm) .45 .60 .99 .73 .53 .27 .702" (51 mm) .67 .77 .93 .74 .47 .28 .751" (25 mm) .15 .71 .65 .82 .41 .16 .651½" (38 mm) .42 .55 .91 .69 .40 .23 .652" (51 mm) .75 .71 .80 .66 .41 .24 .65

6.0 PCF(96 kg/m3)

ASJ

ASJ

1" (25 mm) .05 .26 .77 1.04 1.04 1.03 .80

2" (51 mm) .13 .58 1.01 1.05 1.00 1.01 .90Plain

FSK1" (25 mm) .23 .65 .39 .48 .47 .32 .501½" (38 mm) .61 .47 .78 .61 .51 .35 .60

1½" (38 mm) .61 .47 .78 .61 .51 .35 .60

2" (51 mm) .77 .50 .72 .58 .53 .41 .601½" (38 mm) .60 .46 .62 .48 .47 .31 .502" (51 mm) .77 .44 .60 .50 .41 .30 .50

Mean Temperaturek k (SI) k k (SI) k k (SI)

75°F (24°C) .24 .035 .23 .033 .22 .032

100°F (38°C) .25 .036 .24 .035 .23 .033200°F (93°C) .33 .048 .29 .042 .27 .039

300°F (149°C) .42 .061 .37 .053 .34 .049

.057

.043

.036

.029

5010

10038

( F)(oC)

15066

20093

0-18

250121

300149

1.6 PCF (26 kg/m3 )

.40

.35

.30

.25

6 PCF (96kg /m

3 )2.25 PCF (36 kg/m

3 ), 3 PCF(48 kg/m3 )

4.25 PCF (68 kg/m3 )

.050

.20

o

THERMAL EFFICIENCY (ASTM C 177)

The

rmal

Co

nduc

tivi

ty (

BT

U-i

n./h

r • ft

2 • o

F)

Mean Temperature

The

rmal

Co

nduc

tivi

ty (

SI U

nits

) (W

/m •

oC

)

MADE IN THE USA05/2012

INSTALLATIONManson AK BOARD® insulation is usually installed inaccordance with the procedure in the publication“Commercial & Industrial Standards” by theNational Insulation Association (NIA).

Manson Insulation Products Ltd. has no control overinstallation design, installation workmanship, accessorymaterials, or conditions of application. Manson doesnot warrant the performance or results of any installationcontaining their products. This warranty disclaimerincludes all implied warranties, including the warrantiesof merchantability and fitness for a particular purpose.

Specialty Construction Brands, Inc.

Customer Service 1105 South Frontenac Street Fax 800-231-9541 Aurora, IL 60504 800-942-6856

CP-34 Vapor Retardant Coating

DESCRIPTION CP-34 is a water based vapor retarder coating for use over many types of thermal insulation including polystyrene foam. It is ideal for use over ASJ, FRK and FSK jackets and board facings to give a vapor retarding seal at joints, laps and weld pin punctures. CP-34 is formulated for indoor and outdoor commercial use. It has a mild latex “paint type” odor and is designed for use on pipes, vessels, ducts and equipment operating between 32°F (0°C) and ambient temperatures. CP-34 has a WVTR rating in the range of other competitive water based vapor barrier coatings. For heavier duty commercial or industrial use select Childers CP-35. LIMITATIONS Store and apply between 40°F (4°C) and 100°F (38°C); protect from freezing until dry. Always test foil and paper facings for acceptable adhesion before using. Outdoor horizontal surfaces must always drain completely. A pitch of at least 1/2 inch per foot (4 cm/m) is required. To resist rain washoff, allow at least 16 hours drying time above 50°F (10°C), with a relative humidity of 50%. Higher humidity and/or lower temperature may retard drying. CERTIFIED • Meets NFPA Standard 90-A and 90-B 25/50 requirements

when used to seal seams and punctures in vapor barrier facings and jacketing.

• This product has been tested according to ASTM E-84 (Surface Burning Characteristics of Building Materials).

• Meets requirements for LEED IEQ 4.2 Low-Emitting Materials, Paints and Coatings. VOC: 34 g/l, less water and exempt solvents.

Visit us on the web at www.fosterproducts.com

COLOR White WET WEIGHT (ASTM D1475) 11.5 lbs. 1.38 kg/liter AVERAGE NON-VOLATILE (ASTM D1644) 48% by volume (62% by weight) SERVICE TEMPERATURE LIMITS (FSTM 70) (Temperature at coated surface.) -20°F to 180°F -29°C to 82°C DRYING TIME (23°C) 50% RH (ASTM D1640) To Touch–4 hours Through–24 hours COVERAGE (FSTM 71) (Subject to the surface being coated.) Wet coverages shown below are for smooth non-porous surfaces. Porous or rough surfaces will require higher gallonage to attain required dry thickness. 4 gallons/100 sq. ft. (1.6 l/sq. m) .064 in. wet thickness (1.6 mm). WATER VAPOR PERMEANCE ASTM F 1249, 0.08 perms at 45 mils dry. Tested at 100°F (38°C) and 50% RH. WET FLAMMABILITY (ASTM D3278) Flash Point: None to boiling, 212°F (100°C) SURFACE BURNING CHARACTERISTICS (ASTM E-84) Flame Spread 15 Smoke Develop 35 Surface Inorganic reinforced cement board Number of Coats 1 Coverage 25 sq. ft/gal. Applied in a 4 inch wide strip. Flash Point of liquid coating, closed cup: No flash to boiling.

0908

DS CP34 R0908

Suggested Specifications

CP-34 Vapor Retardant Coating

Suggested Specifications . . . for vapor sealing insulation on low temperature equipment, chilled water or refrigerated piping and fittings. The insulation on all piping, fittings, and equipment shall be vapor sealed with Childers® CP-34 Vapor Retarder Coating. The first coat shall be a tack coat applied at a coverage rate of 2 U.S. gals./100 sq. ft. (0.8 l/sq. m). While still wet a layer of CHIL-GLAS® #10 Glass Fiber Reinforcing Mesh shall be embedded, with all seams overlapped a minimum of 2" (5.08cm). A finish coat at a coverage rate of 2 U.S. gals./100 sq. ft. (0.8 l/sq. m) shall be applied so that the total wet film thickness is a minimum of 0.064". This will provide a minimum dry film thickness of 0.032". All fibrous glass (or other) insulation shall be applied with CHIL-GRIP™ CP-124 Adhesive. The adhesive shall be spray-applied to the duct work at a maximum coverage of 400 sq. ft. per gallon (9.8 sq. m/liter), and full coverage shall be given to the metal.

NOTES TO SPECIFYING ENGINEER 1. Childers® CP-34 Vapor Retarder Coating is white in color and should be specified where white All Service Jacketing (ASJ), canvas, or other white coatings/finishings are specified on the adjoining pipe or equipment insulation. 2. Do not use over copper clad wire. 3. All horizontal surfaces must be sloped at least 1/2 inch per foot (4 cm/m) to assure water run-off and prevent the ponding of rain water and melting snow or ice.

Application Guide and Suggested Procedures 1. USE OF MATERIAL Stir well. DO NOT THIN. Apply only to clean, dry, oil-free surfaces. Keep container closed when not in use. 2. APPLICATION – INDOOR AND LIGHT DUTY OUTDOOR To prevent water vapor and moisture infiltration, proper and complete flashing is required. Follow flashing specifications. 1. Apply tack coat of CP-34 Vapor Retarder Coating at 2

gallons per 100 sq. ft. (0.8 l/sq. m). 2. Embed CHIL-GLAS #10 membrane into the wet tack coat.

Smooth membrane to avoid wrinkles and overlap all seams at least two inches (5 cm). Apply finish coat of CP-34 coating, within 1/2 hour of the tack coat application, at 2 gallons per 100 square feet (0.8 l/sq. m).

3. This application shall provide a minimum dry thickness of 31 mils (0.8 mm).

3. BRUSH Use a good brush, suitable for water based paints, making strokes as long as possible over the surface. Apply with full brush and spread out evenly. Do not overwork. 4. SPRAY CP-34 Vapor Retarder Coating may be airless spray applied. For spray equipment information, please consult Airless Spray Recommendations or contact your Spray Equipment Supplier. Average viscosity range: 85,000-110,000 cps. Corrosion resistant pumps and fittings are suggested. 5. CLEAN UP Use fresh water to clean brushes and equipment before product dries. Dry product may be removed with hot soapy water (with ammonia added) or strong solvents such as chlorinated solvent (non-flammable) or xylol (flammable).

CUSTOMER SERVICE: 800-231-9541

IMPORTANT: Specialty Construction Brands, Inc. warrants that each of its products will be manufactured in accordance with the specifications in effect on the date of manufacture. WE MAKE NO OTHER WARRANTIES AND EXPRESSLY DISCLAIM ANY WARRANTIES OF MERCHANTIBILITY OR FITNESS FOR A PARTICULAR PURPOSE. If a product fails to meet this limited warranty, purchaser’s sole and exclusive remedy is replacement of the product or, at our option, refund of the purchase price. OUR ACCEPTANCE OF ANY ORDERS FOR THE PRODUCT IS EXPRESSLY CONDITIONAL UPON PURCHASER’S ASSENT TO THE TERMS ON THE APPLICABLE INVOICE. ADEQUATE TESTS: The information contained herein we believe is correct to the best of our knowledge and tests. The recommendations and suggestions herein are made without guarantee or representation as to results. We recommend that adequate tests be performed by you to determine if this product meets all of your requirements. The warranted shelf life of our products is six months from date of shipment to the original purchaser.

For professional use only. Keep out of reach of children. Consult Material Safety Data Sheet and container label for further information.

FIRE RATED WRAP

3M™ Fire Barrier Duct Wrap 615+Product Data Sheet

1. Product Description 3M™ Fire Barrier Duct Wrap 615+ is a flexible fire-resistant wrap consisting of an inorganic fiber blanket encapsulated with a scrim-reinforced foil. The product is 1-1/2 in. thick, 6pcf density.1 It is used to fire rate commercial kitchen grease ducts as well as ventilation ducts. 3M™ Fire Bar-rier Duct Wrap 615+ is a proven alternative to 1- or 2-hour fire-resistant rated shaft enclosures for grease ducts (ICC-ES ESR-1255). With its excellent insulating capabilities, low weight and thin profile, it is an ideal choice for a duct enclosure system. This non-asbestos2 wrap installs easily due to its high flexibility and strength.1 In accordance with the tolerances in ASTM C 892 Standard Specification for High-Temperature Fiber Blanket Thermal Insulation.2 Has been demonstrated to be soluble in the lungs according to EU guideline 97/69/EG, for biopersistence.

2. Applications 3M™ Fire Barrier Duct Wrap 615+ is an ideal fire resistive enclosure for com-mercial kitchen grease ducts and ventilation air ducts. It is a proven performance alternative to a 1- or 2-hour fire-resistant rated shaft enclosures for grease ducts and provides zero clearance to combustible construction throughout the entire enclosure system. 3M™ Fire Barrier Water Tight Sealant 1000 NS, 3M™ Fire Barrier Water Tight Sealant 1003 SL or 3M™ Fire Barrier Silicone Sealant 2000+ is used in combination with 3M™ Fire Barrier Duct Wrap 615+ to firestop the duct when the duct penetrates fire-rated floor or wall assemblies. 3M™ Fire Bar-rier Duct Wrap 615+ also provides a firestop solution where a T-rating is required for penetrations located outside wall cavities or outside fire-resistance rated shaft enclosures.

Two-layer grease duct applications: 3M™ Fire Barrier Duct Wrap 615+ meets the criteria of ASTM E 2336 Standard Test Methods for Fire Resistive Grease Duct Enclosure Systems.Single-layer air duct applications: 3M™ Fire Barrier Duct Wrap 615+ has passed ISO 6944-1985 Fire Resistance Tests – Ventilation Ducts.T-rating for metallic through-penetrating items: 3M™ Fire Barrier Duct Wrap 615+ is used in conjunction with 3M Fire Barrier sealants to achieve up to 2-hour equal F & T-ratings in ASTM E 814 (Ul 1479) tested through-penetrations.

For technical support relating to 3M Fire Protection Products and Systems, call: 1-800-328-1687For more information on 3M Fire Protection Products, visit: www.3m.com/firestop

3. Specifications Installation shall be in strict accordance with manufacture’s written instructions, as shown on the approved shop drawings. 3M™ Fire Barrier Duct Wrap 615+ shall be a high-temperature fiber blanket thermal insulation encapsulated in a fiberglass-reinforced alu-minized polyester foil. Duct Wrap density shall be nominal 6 pcf (96 kg/m3) and have a nominal 1-1/2 in. (38.1 mm) thickness. The fiber blanket shall have a continuous use limit of 1000 °C (1832 °F). The blanket thermal resis-tance (R-value) at ambient temperature shall be minimum .

Smoke Developed Index and Flame Spread Index of the bare blanket, and of the foil encapsulated blanket shall be 0/0. The foil encapsulation shall be bonded to the core blanket material.

Typically Specified Division or SectionDivision 7 – Thermal and Moisture ProtectionSection 23 07 13 – Duct InsulationRelated SectionsSection 07 21 00 – Thermal ProtectionSection 07 21 16 – Blanket InsulationSection 07 84 00 – FirestoppingSection 23 00 00 – Heating, Ventilation and Air-Conditioning (HVAC)Section 23 31 13 – Metal Ducts

Flexible and lightweight with a thin profile for easier application andreduced space requirements

Fire Protection

FIRE BARRIER

UPTO2 HO

UR

BATTS AND BLANKETSFOR USE IN FIRE RESISTIVE DUCT ASSEMBLIES

SEE UL FIRE RESISTANCE DIRECTORY90G9

FIRE RESISTANT DUCTSEE INTERTEK DIRECTORY

FIRE RESISTANT DUCTSEE INTERTEK DIRECTORY

GREA

SE & AIR

Fire Protection

FLEXIBLE WRAP

DUCT

Product Features• Two-layer wrap for grease ducts rated as a shaft alternative per ASTM E 2336• Zero clearance to combustible throughout the entire enclosure system for congested spaces• Butted inner layer in 2-layer Grease Duct Applications• One-layer wrap for fire-resistive ventilation ducts per ISO 6944

• High flexibility for installation ease• Foil encapsulated for blanket protection, less dust, and high wrap strength• Widest range of penetration seal systems• Available in 24 in. x 25 ft. (609.6 mm x 7.62 m) and 48 in. x 25 ft. (1219.2 mm x 7.62 m) rolls• Blanket adhered to foil scrim

ICC-ES ESR-1255

CSFMLISTING No.

2440-0941:112

6.3 °F - ft - hrBtu

2

4. Performance & Typical Physical PropertiesScrim Color: Aluminum with Black TextBlanket Color: WhiteBlanket Weight: 0.9 lbs/ft.2 (4.38 kg/m2)Surface Burning: Foil Encapsulated Blanket (ASTM E 84) Flame Spread 0, Smoke Development 0

Single layer R-Value of 3M™ Fire Barrier Duct Wrap 615+ at 77°F (25°C):

Thermal Conductivity:

Linear Shrinkage (24 Hr@ 2012°F (1000°C)): 1.2%

Btu - in. hr - ft2 - °F

W m2 - KTemp.

500°F (260°C) 0.60 0.091000°F (537°C) 1.15 0.171500°F (815°C) 1.93 0.281800°F (982°C) 2.51 0.362000°F (1093°C) 2.94 0.43

6.38 °F - ft - hrBtu

2

Fire Resistive Third-Party Testing Services Rating Enclosure System Design Listing Description

Fire Resistive Third-Party Testing Services Rating Enclosure System Design Listing Description

2 layers of 3M™ Fire Barrier

ICC-ES ESR-1255 Rectangular 1- and 2-hour Duct Wrap 615+ Intertek 3MU/FRD 120-18 Rectangular Intertek 3MU/FRD 120-19 Round

1 layer of 3M™ Fire Barrier

Intertek 3MU/DI 60-01 Rectangular/Round (1 Hour) 1- and 2-hour Duct Wrap 615+ Underwriters Laboratories HNLJ.V-27 Rectangular (2 Hour) Intertek 3MU/DI 120-01 Rectangular/Round (2 Hour)

Grease Duct Listings – ASTM E 2336 / ICC-ES AC101

Ventilation Duct Listings – ISO 6944

5. Design Listings

6. Codes & Test Standards 3M™ Fire Barrier Duct Wrap 615+ has been tested in accordance with the following:ICC-ES AC101 ASTM E 2336 ASTM E 119 ASTM E 814 ASTM E 84 ASTM E 136 ASTM C 518 ISO 6944-85

3M™ Fire Barrier Duct Wrap 615+, when installed per ASTM E 2336 tested Grease Duct Design Listings, meets the following code requirements:NFPA 96 2008 Edition International Mechanical Code® 2003/2006/2009 Uniform Mechanical Code 2003/2006/2009

3M™ Fire Barrier Duct Wrap 615+, when installed per ISO 6944 tested Ventilation Duct Design Listings, can help to satisfy the following code requirements:NFPA 92A 2009 Edition – Section 6.6.2 NFPA 92B 2009 Edition – Section 7.5.2 International Mechanical Code® 2006/2009 Editions – Section 513.10.2 International Building Code® 2006/2009 Editions – Section 909.10.2

7. Packaging, Storage, Shelf Life 3M™ Fire Barrier Duct Wrap 615+ rolls are packaged in corrugated cardboard boxes. Product is stable under normal storage conditions. Normal stock and stock rotation practices are recommended. 3M™ Fire Barrier Duct Wrap 615+ shelf life is indefinite when stored in original unopened packaging in a dry warehouse environment. Pallets should not be stacked. 3M™ Fire Barrier Water Tight Sealant 1000 NS or 1003 SL or 3M™ Fire Barrier Silicone Sealant 2000+ must be also stored in a dry warehouse environment.

8. Safe Handling Information Consult country-of-use Material Safety Data Sheet (MSDS) prior to handling and disposal.

9. Availability

This document only contains a partial list of Design Listings. For the latest information go to www.3M.com/firestop or speak to your authorized 3M distributor or sales representative at (800) 328-1687.

Description Size Unit Billing UPC Number Units/Case Price Unit

Space-saving, flexible duct wrap with up to 2-HR protection 24" x 25' Roll Roll 00051115-54905-2 1 EA

Space-saving, flexible duct wrap with up to 2-HR protection 48" x 25' Roll Roll 00051115-54906-9 1 EA

Collar for butted joint installations 6" x 25' Roll Roll 00051115-18804-6 4 EA

Important Notice to User: Technical Information: The technical information, recommendations and other statements contained in this document are based upon tests or experience that 3M believes are reliable, but the accuracy or completeness of such information is not guaranteed. Product Use: Many factors beyond 3M’s control and uniquely within user’s knowledge and control can affect the use and performance of a 3M product in a particular application. Given the variety of factors that can affect the use and performance of a 3M product, user is solely responsible for evaluating the 3M product and determining whether it is fit for a particular purpose and suitable for user’s method of application.

Warranty and Limited Remedy: 3M warrants that each 3M Fire Protection Product will be free from defects in material and manufacture for 90 days from the date of purchase from 3M’s authorized distributor. 3M MAKES NO OTHER EXPRESS OR IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If a 3M product does not conform to this warranty, the sole and exclusive remedy is, at 3M’s option, replacement of the 3M product or refund of the purchase price. Limitation of Liability: Except where prohibited by law, 3M will not be liable for any loss or damage arising from the 3M product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted.

Building and CommercialServices Division3M Center, Building 223-2N-21St. Paul, MN 55144-1000 USA1-800-328-1687www.3M.com/firestop

For additional technical and purchasing information regarding 3M Fire Protection Products, please call: 1-800-328-1687 or visit www.3m.com/firestop.3M™ Fire Barrier Duct Wrap 615+ is available from 3M Authorized Fire Protection Products Distributors and Dealers.

Please Recycle. Printed in USA. © 3M 2011. All Rights Reserved.Reference: 98-0213-4648-5

3M is a trademark of 3M Company. All other trademarks are the property of their respective owners.

CHILLED WATER PIPING AND EQUIPMENT

Physical Properties USA Metric SI ASTM Test

Absorption of moisture 0.2% C 240(% by volume) Only moisture retained is that adhering to surface cells after immersion.

Water-vapor permeability 0.00 perm-in 0.00 perm-cm E 96

Acid resistance Impervious to common acids and their fumes, except hydrofluoric acid.

Capillarity None None None

Combustibility Noncombustible, will not burn. E 136

Flame spread 0 E 84

Smoke developed 0 E 84

Composition Pure glass, totally inorganic, contains no binder.

Compressive strength average 90 psi 6.3 kg/cm2 620 kPa C 165for standard material (± 10%) Strength for flat surfaces capped with hot asphalt, different capping will C 240 give different values. For curved surfaces and pipe supports, contact PCC. C 552-00

Density, average 7.5 lb/ft3 120 kg/m3 120 kg/m3 C 303

Dimensional stability Excellent — does not shrink, swell or warp.

Flexural strength, 70 psi 4.9 kg/cm2 480 kPa C 203block average C 240Hygroscopicity No increase in weight at 90% relative humidity.

Linear coefficient of thermal 5.0 x 10-6 /°F 9.0 x 10-6/°C 9.0 x 10-6 /°K E 228expansion (25° to 300°C)

Maximum service temperature +900°F +482°C 755°K

Modulus of elasticity, approx. 1.3 x 105 psi 9,300 kg/cm2 900 MPa C 623

Shear strength No reliable recognized test method for determination of the shear strength for cellular glass exists at this time. Where shear strength is a design criterion, PCC should be contacted for recommendations.

Thermal conductivity Btu-in/hr • ft2 • °F kcal/m • h • °C W/mK C 177

0.29 @ 75°F 0.033 @ 0°C 0.039 @ 0°C C 518

0.28 @ 50°F 0.034 @ 10°C 0.040 @ 10°C

Specific heat 0.20 Btu/lb • °F 0.20 kcal/kg • °C 0.84 kJ/kg • °K

Thermal diffusivity 0.016 ft2/hr 0.0042 cm2/sec 4.2 x 10-7m2/sec

NOTE: Properties given at 75°F unless otherwise specifi ed. Properties may vary with temperature. These values are average or typical values recommended for design purposes, and are not intended as specifi cation or limit values.

† E 96 Wet Cup Method/Procedure B

FOAMGLAS® insulation is manufactured by Pittsburgh Corning Corporationin a basic block form. Blocks are fabricated into a wide range of shapes,thicknesses and sizes to satisfy industrial insulation requirements.

2005

Industrial Piping,Ducts and EquipmentFOAMGLAS® insulation isa lightweight, rigid materialcomposed of millions ofcompletely sealed glass cells.Each cell is an insulatingentity. FOAMGLAS® insulation’sall-glass, closed-cell structureprovides the following benefits:• Constant Insulating Efficiency• Zero Water Vapor Permeability• Moisture Resistance• Fire Protection• Corrosion Resistance• Long-Term Dimensional Stability• Vermin Resistance• CFC and HCFC Free

These benefits result in FOAMGLAS® Insulation Systems that are long-lasting, require little maintenance and are ideal for:• Low temperature pipe, equipment, tanks and vessels.• Medium and high temperature pipes and equipment.• Hot oil and hot asphalt storage tanks.• Heat transfer fluid systems.• Hydrocarbon processing systems.• Chemical processing systems.• Above ground and underground steam and chilled water piping.• Commercial piping and ductwork.Manufactured to comply with ASTM C552-00.

FOAMGLAS® insulation

FOAMGLAS®

Insulation Systems for Industrial ApplicationsPittsburgh Corning has developed insulation systems for a wide range of piping and equipment applications—above ground or underground, indoors or outdoors—at operating temperatures from -450°F to +900°F (-268°C to +482°C).

For complete data on FOAMGLAS® Insulation Systems, pleasevisit our Web site at www.foamglasinsulation.com, or contact Pittsburgh Corning at any of the following locations:

CorporateHeadquarters800 Presque Isle DrivePittsburgh, PA 15239Tel: 800-359-8433 or 724-327-6100Fax: 724-325-9704

CanadaEdmonton, AlbertaTel: 780-424-2640Montreal, QuebecTel: 514-866-9100

InternationalPittsburgh CorningInternational SalesCorporationTel: 724-327-6100Fax: 724-733-4815

The information contained herein is accurate and reliable to the best of our knowledge. But, because Pittsburgh Corning Corporation has nocontrol over installation worksmanship, accessory materials or conditions of application, NO EXPRESSED OR IMPLIED WARRANTY OF ANY KIND,INCLUDING THOSE OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, IS MADE as to the performance of an installation containing Pittsburgh Corning products. In no event shall Pittsburgh Corning be liable for any damages arising because of product failure, whether incidental, special, consequential or punitive, regardless of the theory of liability upon which any such damages are claimed. Pittsburgh Corning Corporation provides written warranties for many of its products, and such warranties take precedence over the statements contained herein.

With the patented StrataFab® System, blocks of FOAMGLAS® insulation are laminated into billets using a special high temperature adhesive. These billets are fabricated into the desired shapes and sizes for pipe, tank, vessels, flanges and valves—practically any industrial insulation application.

The Advantage® System is a method offabricating FOAMGLAS® insulation bybonding segments or lags of insulationto a flexible facing with special adhesives.Designed specifically for temperatureranges from ambient to 900°F.

FOAMGLAS®, Advantage® and StrataFab® are federally registered trademarks owned by Pittsburgh Corning Corporation.

© 2005 Pittsburgh Corning Corporation

Printed in U.S.A. FG-3 20M Rev. 11/05 (Replaces Rev. 1/02)

Totally ImpermeableLong Term Performance.Because it consists of closed glass cells, FOAMGLAS® insulation resists moisture in both liquid and vapor form. When tested in accordance with ASTM E96, it has a permeability rating of 0.00 perm-in.

Noncombustible.FOAMGLAS® insulation is 100% glass and contains no binders or fillers—it cannot burn. FOAMGLAS® insulation will not absorb flammable liquids or vapors. If a fire does occur, FOAMGLAS® insulation will help contain it.

Corrosion-Resistant.All-glass FOAMGLAS® insulation is unaffected by common chemicals and by most corrosive plant atmospheres. It does not promote metal corrosion, and its moisture resistance will help keep water from reaching equipment and piping.

Dimensionally Stable.FOAMGLAS® insulation is unaffected by temperature differentials and humidity. It will not swell, warp, shrink or otherwise distort. The insulation system’s integrity remains intact.

High Compressive Strength.FOAMGLAS® insulation can withstand loads which crush most other insulating materials. In a properly designed piping system, FOAMGLAS® insulation eliminates the need for special treatment at pipe cradles. It also provides a firm base for roof membranes, jacketing or vapor retarders, prolonging their life.In addition, FOAMGLAS® insulation weighs only 7.5 lb/ft3. This makes it easy to handle in difficult installations.

Technical Service.Pittsburgh Corning’s Technical Service Staff provides product, application and materials testing—standardized and customized specifications—on-site customer assistance and installation guidance.

CERTIFICATIONS* AND APPROVALS

FOAMGLAS® insulation can be certified to conform to the requirements of:• ASTM C 552 “Specification for

Cellular Glass Thermal Insulation”• Canadian Standard CAN/CGSB51.38M• Military Specification MIL-I-24244C,

“Insulation Materials, Thermal, with Special Corrosion and Chloride Requirement”

• Nuclear Regulatory Guide 1.36, ASTM C 795, C 692, C 871

• Flame Spread 0, Smoke Developed 0 (UL 723, ASTM E 84), R2844; also classified by UL of Canada, CR1957

• ISO 9001:2000• For a listing of UL Through

Penetration Fire Stop Approved Systems please search the UL Database at http://www.ul.com/

Once on this page click on CERTIFICATIONS on the left hand side. Under General Search click on UL FILE NUMBER and type in R15207 and then SEARCH

• Board of Steamship Inspection (Canada) Certificate of Approval No. 100/F1-98

• General Services Administration, PBS (PCD): 15250, Public Building Service Guide Specification, “Thermal Insulation (Mechanical)”

• New York City Dept. of Bldgs., MEA #138-81-M FOAMGLAS® insulation for piping, equipment, walls and ceilings

• New York State Uniform Fire Prevention and Building Code Dept. of State (DOS) 07200-890201-2013

• City of Los Angeles General Approval RR22534

FOAMGLAS® insulation is identified by Federal Supply Code for Manufacturers (FSCM 08869)

*Written request for certificate of compliance must accompany order.

Page 1 of 1 FI-169 Rev 08/2010Replaces Rev --/--

PITTSEAL® CW SEALANT PRODUCT DATA SHEET

IMPORTANT: MATERIAL SAFETY DATA SHEETS ARE AVAILABLE AND SHOULD BE READBEFORE USING THIS PRODUCT.

DESCRIPTION:PITTSEAL® CW sealant is a high performance, MS Polymerbased sealant. PITTSEAL® CW sealant offers theadvantages of both silicone and polyurethane sealants inone product, without the disadvantages of either.PITTSEAL® CW sealant contains no isocyanates orsolvents. It is VOC compliant, UV resistant, paintable,and has excellent adhesion and durability. PITTSEAL®

CW sealant requires no primer and is compatible with awide variety of coatings.

USES:PITTSEAL® CW sealant is used for sealing joints inFOAMGLAS® pipe insulation and between FOAMGLAS®

insulation block on chilled water systems.

*TYPICAL PROPERTIES:PROPERTY

Color: WhiteWeight: kg/liter (lbs/gal): 1.6 ± 0.2 (13 ± 2)Solids, Vol %: (min.) >90**Flame Spread, ASTM E84 <10 Smoke Development <10

Application Temp: °C (°F) -18 to 88(0 to 190)

***Service Temp: °C (°F) -40 to 93(-40 to 200)

Cure Time: Tack Free (Full) 90 min. (24 hr)Permeability, ASTM E96: ng/s m2 Pa (perm in)

0.0015 (0.001)

Coverage: .33 m²/l = 3 mm(12.8 ft²/gal = 1/8 in film)

Volatile Organic Content: (VOC)(max. less water and exempt)

35 g/l (0.3 lbs/gal)

*Typical properties at time of printing, subject to change **Tested with FOAMGLAS® insulation under application conditions.

***At sealant location.

APPLICATION:DO NOT THIN. Apply with trowel, knife or caulkinggun. All surfaces should be dry and free of dust, loosescale, oil, grease and frost. Apply sufficient material toboth surfaces and press surfaces together firmly to obtaina complete seal. Joints less than or equal to 3 mm ( in.)are desirable. Do not use this or any other sealant to filllarge voids from poor fitting. Insulation joints should berubbed to obtain good fit before application of sealant. Ifa coating is to be applied, cut off any squeezed-outsealant flush with surface.

PITTSEAL® CW sealant works easily over thesuggested application range. To facilitate applicationat low temperature, keep containers in a heatedlocation or loosen lid and warm by indirect heat. DONOT HEAT containers with flame or direct heat.

CLEAN-UP AND DISPOSAL:Tools may be cleaned with mineral spirits beforecure.See Material Safety Data Sheet for proper disposal.

LIMITATIONS:DO NOT apply to wet or frost-bearing surfaces.Allow sealant to cure at least 2 hours before exposureto water.

PACKAGING:266 ml (9 fl. oz.)cartridges (12/case)13.2 liter (3.5 gallon) containers

The information contained herein is accurate and reliable to the best of our knowledge.But, because Pittsburgh Corning has no control over installation workmanship, accessorymaterials or conditions of application, NO EXPRESS OR IMPLIED WARRANTY OFANY KIND, INCLUDING THOSE OF MERCHANTABILITY OR FITNESS FOR APARTICULAR PURPOSE, IS MADE as to the performance of an installation containingPittsburgh Corning products. In no event shall Pittsburgh Corning be liable for anydamages arising because of product failure, whether incidental, special, consequential orpunitive, regardless of the theory of liability upon which any such damages are claimed.Pittsburgh Corning provides written warranties for many of its products, and suchwarranties take precedence over the statements contained hereinFOAMGLAS® and PITTSEAL® are federally registered trademarks owned by PittsburghCorning

Pittsburgh Corning800 Presque Isle Drive Pittsburgh, PA 15239-2799 USAToll Free: 800-545-5001Phone: (724)327-6100 Fax: (724)387-3806http://www.foamglas.com/

Pittsburgh Corning Europe S.A./ N.V. (EMEAHeadquarters)Albertkade 1 3980 Tessenderlo BelgiumPhone: +32-13-611-415 Fax: +32-13-351-567

Pittsburgh Corning Asia / Pacific(Asia Headquarters)PARK LUXE HONGO 100129-4, HONGO 2-CHOME, BUNKyO-KUTOKYO 113-0033 JAPANTelephone / Fax: 81-50-7554-0248

Russell

Text Box

for use on piping exposed to view

RPR Products Inc. Metal Jacketing Specialist

INSUL - MATE ® ALUMINUM ROLL JACKETING

DESCRIPTION RPR Products Insul-Mate aluminum roll jacketing is manufactured from wrought aluminum alloys 3003 and 3105, used interchangeably, conforming to ASTM B209 designation. The product is cold-rolled to an H-14 temper (half-hard) which provides the required strength to resist in-service abuse. Ease of fabrication and installation are plus benefits. Aluminum's resistance to atmospheric corrosion makes it the ideal metal jacketing in most marine, chemical and industrial environments. Excellent cost savings can be achieved through long service with little maintenance. FINISHES RPR Products Insul-Mate aluminum roll jacketing is available in smooth, stucco embossed, and 3/16” corrugated (TVR). MOISTURE RETARDER Insul-Mate aluminum roll jacketing is supplied with a moisture retarder, which consists of 40-pound kraft paper coated with 1.5 mil thick, low density polyethylene film, heat and pressure bonded to the interior surface. This moisture retarder impedes galvanic corrosion caused by contact of dissimilar metals in the presence of moisture, and chemical corrosion caused by installing over damp insulation materials. For increased galvanic and corrosion protection, 3 mil & 4.5 mil “HP” Poly-Surlyn * moisture barrier is available. *Surlyn - A DuPont trademark.

THICKNESSES WIDTHS LENGTHS

.016” (.4 mm)

36” (914 mm)

48” (1219 mm) 100’

(30 m)

.020” (.5 mm)

36” (914 mm)

48” (1219 mm) 100’

(30 m)

.024” (.6 mm)

36” (914 mm)

48” (1219 mm) 100’

(30 m)

.032” (.8 mm)

36” (914 mm)

48” (1219 mm)

50’ (30 m)

.040” (1.0 mm)

36” (914 mm)

48” (1219 mm)

50’ (30 m)

.050” (1.2 mm)

36” (914 mm)

48” (1219 mm)

50’ (30 m)

800/231-0149 Fax 713/697-1844

www.rprhouston.com

REFRIGERANT & CONDENSATE DRAIN PIPE INSULATION

Made in USAContains a Protective Antimicrobial Agent

DESCRIPTIONINSUL-TUBE® is an NBR/PVC-based closed cell, flexible elastomeric foam insulation. It is environmentally-friendly as it is free of CFCs, HFCs, HCFCs, PBDEs, formaldehyde and fibers. An EPA-registered antimicrobial agent is incorporated into the product providing additional protection against mold, fungal and bacterial growth. It is UL GREENGUARD® Gold Certified for low VOC emissions. The product’s key physical properties are approved by Factory Mutual. The product is made in K-FLEX USA’s ISO 9001:2008-certified manufacturing facility in North Carolina.

AVAILABILITYINSUL-TUBE® is black in color and is available in non-slit, 6’ length tube form in wall thick-nesses of 3/8” up to 2” in diameter sizes rang-ing from 3/8” I.D. to 8” IPS. (ID range is subject to variation depending on wall thickness).

APPLICATIONSINSUL-TUBE® is recommended for applications with service temperatures ranging from -297°F (-182°C) to +220°F (+104°C). For applications below -40°F (-40°C), contact K-FLEX technical support. The product is used to retard heat gain and prevent condensation or frost formation on below-ambient applications, including refrigerant, cold water plumbing, chilled water, and industrial process lines, among others. It can be used with heat tracing tapes. It also retards heat loss from medium hot systems, including hot water plumbing, liquid heating, dual temperature, and solar thermal piping, among others.

OUTDOOR APPLICATIONS INSUL-TUBE® is made from a UV-resistant elastomeric blend. For low-to-moderate UV exposure (residential applications), no ad-ditional protection is needed. For severe UV exposure (rooftop applications) or for optimum performance, K-FLEX® 374 Protective Coating, approved jacketing or K-FLEX Clad® is required.

UNDERGROUND APPLICATIONSINSUL-TUBE® is acceptable for use in buried applications using the same installation prin-ciples as above ground applications. For lines above the water table, use a clean fill such as sand (3”-5” layer) to protect the insulation be-fore backfilling. For optimum performance, the lines should be encased in a conduit to protect them from problems associated with ground water intrusion and compaction. If a conduit is not used, the insulation thickness should be increased by one thickness size to compensate for compaction.

INSTALLATION INSUL-TUBE® is flexible (even at low tem-peratures), durable (non-fracturing and skin is resistant to tearing from handling and environment), safe to handle (non-dusting and non-abrasive), and lightweight for an efficient installation.

K-FLEX recommends that insulation is installed on non-operational systems with clean, dry surfaces in ambient conditions between 40°F and 100°F. Properly sized insulation tubing can be slid over piping (tubing should be pushed, not pulled) or, when applied to existing lines, can be slit lengthwise (using a sharp, non-serrated knife) and fitted into place. All seams, butt joints, termination points and open ends should be sealed with an approved contact adhesive, making sure both surfaces to be joined are coated. Longitudinal seams should face downward and vapor stops should be installed as needed. Fittings (elbows, tees, p-traps) and special parts (flanges, valves, etc.) can be field-fabricated from insulation tubes and sheets or K-Fit® factory-fabricated fittings can be used. ASTM C1710, Installation Guide for Flexible Closed Cell Foams, and the K-FLEX Installation Manual should be used as comprehensive installation guides.

RESISTANCE TO MOISTURE VAPOR FLOW The expanded closed cell structure and unique formulation inherently resists moisture vapor intrusion and is considered a Class 1 vapor retarder per ASHRAE. For most indoor applica-tions, INSUL-TUBE® needs no additional protec-tion. Additional vapor barrier protection may be necessary when installed on cold surfaces that are exposed to continuous high humidity.

FLAME AND SMOKE RATING INSUL-TUBE® in wall thicknesses of 2” (50 mm) and below has a flame spread rating of 25 or less and a smoke development rating of 50 or less as tested to ASTM E84, “Surface Burning Characteristics of Building Materials”. It is ac-ceptable for duct/plenum applications, meeting the requirements of NFPA 90A/B.

Numerical flammability ratings alone may not define the performance of products under actual fire conditions. They are provided only for use in the selection of products to meet limits specified when compared to a known standard.

SPECIFICATION COMPLIANCE • ASTM C534 Type 1, Grade 1

• ASTM D1056-00-2B1

• New York City MEA 186-86-M Vol. V

• USDA Compliant

• RoHS Compliant

• UL 94-5V Flammability Classification (#E300774)

• ASTM E84 25/50-rated (to 2”) - tested to UL 723, NFPA 255

and CAN/ULC S102-03

• FMVSS 302

• FAR 25.853

• FMRC Approval Guide: Chapter 14 Pipe Insulation

• NFPA No. 101 Class A Rating

• NFPA 90A, 90B

• MIL-P-15280, Form T

• Meets requirements of California ECB Title 24

• UL GREENGUARD® Gold Certified

• Meets energy code requirements of ASHRAE 90.1 and 189.1

INSUL-TUBE®

Closed Cell Flexible Elastomeric Foam InsulationThermal Performance for HVAC/R Applications

©May 2010 K-FLEX USA. INSUL-TUBE® is a registered trademark of K-FLEX USA. The GREENGUARD® CERTIFIED mark is a registered certification mark used under license through the GREENGUARD® Environmental Institute.

INDS-0001-0114

100 Nomaco Drive - Youngsville, NC 27596 - toll free 800-765-6475 - fax 800-765-6471 - www.kflexusa.com

PHYSICAL PROPERTIES INSUL-TUBE® TEST METHODSMain Composition Flame-retarded NBR/PVC-based elastomeric foam

Thermal Conductivity (K)Btu-in/hr-Ft2-°F (W/mK)

90°F (32°C) Mean Temp75°F (24°C) Mean Temp32°F (0°C) Mean Temp

0.258 (0.0372)0.245 (0.0353)0.235 (0.0339)

ASTM C177

Density 3-5 lb/ft3 ASTM D1667

Operating Temperature Range -297°F* (-183°C) to +220°F (+104°C) ASTM C534

Water Vapor Permeability (Dry Cup) <0.01 perm-in ASTM E96

Water Absorption (Volume Change) 0% ASTM C209

Flame Spread / Smoke Development (up to 2” wall) <25/50 ASTM E84

Dimensional Stability <7% Linear Shrinkage ASTM C534

Hot Surface Performance (220°F) No Cracking or Delamination ASTM C411

Ozone Resistance Pass ASTM D1171

Odor Emissions No Objectionable Odor ASTM C1304

Chemical/Solvent/Oil/Grease Resistance Good Compatibility Data Available on Request

Flexibility ExcellentPass: Cold Crack Test at -40°F (-40°C)

ASTM C534ASTM D1056

Mildew Growth Resistance/Air Erosion Pass UL 181, ASTM G21

Corrosion Risk pH neutral: 6.6±0.04 DIN 1988

Leachable Chlorides <0.05% water-soluble chloride ions DIN 1988

UV / Weather Resistance1 Pass QUV Chamber Test

Sound Transmission Class (1”) 13 ASTM E90

Thickness listed for the specified ranges will prevent condensation on indoor piping under the defined design conditions. Normal: 85°F and 70% R.H. Mild: Most air conditioned spaces and arid climates: 80°F and 50% R.H. Severe: Areas where excessive moisture is introduced or in poorly ventilated areas where the temperature may be depressed below the ambient: 90°F and 80% R.H. Contact K-FLEX technical support for additional information.

PIPE “R” VALUES PER SQUARE FOOT (ALL SIZES ARE NOMINAL)

NOMINAL INSULATION I.D. 3/8” WALL 1/2” WALL 3/4” WALL 1” WALL 1-1/2” WALL 2” WALL

3/8” 2.7 3.6 5.6 8.5 14.6 20.4

1/2” 2.5 3.4 5.4 7.9 13.5 18.9

5/8” 2.5 3.3 5.4 7.5 12.8 17.8

3/4” 2.3 3.1 5.4 7.5 12.4 16.8

7/8” 2.3 3.2 5.4 7.2 11.6 16.1

1-1/8” 2.2 3.1 5.5 7.1 10.8 15.8

1-3/8” 2.2 3.2 5.3 7.3 10.2 14.9

1-5/8” 2.4 3.1 5.1 7.1 9.8 14.6

1-1/2” IPS 2.0 2.6 4.4 6.2 8.9 13.8

2-1/8” 2.3 3.0 4.9 6.6 9.2 13.6

2” IPS 2.3 2.9 4.8 6.5 9.0 13.3

2-1/2” IPS 2.3 3.0 4.6 6.3 8.6 12.6

2-5/8” 2.3 3.1 4.7 6.4 8.8 12.9

3-1/8” 2.3 3.0 4.6 6.2 8.5 12.4

3” IPS 2.3 3.2 4.6 6.1 8.3 12.2

3-5/8” 2.3 3.2 4.6 6.1 8.3 12.1

4-1/8” 2.3 3.1 4.6 6.0 8.1 11.7

4” IPS 2.2 3.2 4.6 5.5 8.0 11.6

5” IPS —— 3.0 4.5 5.7 7.7 11.1

6” IPS —— 3.0 4.4 5.6 7.5 10.9

8” IPS —— 2.9 4.2 5.3 7.2 ——

*For applications below -40°F (-40°C), contact K-FLEX technical support.1 Outdoor applications should be protected with an approved K-FLEX® coating or cladding.

THICKNESS RECOMMENDATIONS (TO PREVENT CONDENSATION)SERVICE TEMPERATURE 50°F (10°C) 35°F (2°C) 0°F (-18°C) -20°F (-29°C)

Pipe Size Mild Normal Severe Mild Normal Severe Mild Normal Severe Mild Normal Severe

3/8” ID to 1-1/8” ID 3/8” 3/8” 3/4” 3/8” 1/2” 3/4” 1/2” 3/4” 1-1/2” 1/2” 1” 1-1/2”

1-3/8” ID to 3” IPS 3/8” 3/8” 3/4” 3/8” 3/4” 1” 1/2” 1” 1-1/2” 3/4” 1-1/2” 1-1/2”

4” IPS to 8” IPS 1/2” 1/2” 3/4” 1/2” 3/4” 1” 3/4” 1” 2” 3/4” 1-1/2” 2”

Made inthe U.S.A.

720-LVOC Contact Adhesive is an air-drying solvent-based (acetone) contact adhesive that is excellent for joining seams and butt joints of elastomeric pipe and Sheet Insulation. It is black in color for excel-lent aesthetics. 720-LVOC Contact Adhesive forms a tough, flexible moisture- and heat-resistant bond when used with elastomeric products. 720-LVOC Contact Adhesive’s lower viscosity allows it to be applied eas-ily. It is ideal for bonding porous and non-porous materials, as it will not be absorbed easily. 720-LVOC Contact adhesive also meets Southcoast Air Quality Management Rule 1168 (SCAQMD) and LEED (Leadership in Energy and Environmental Design) VOC emission regulations.

720-LVOCContact Adhesive – Black

Low VOCMeets SCAQMD 1168 & LEED VOC Emissions Regulations

KFPS-0039-1210

K-Flex USA - 100 Nomaco Drive - Youngsville, NC 27596 - toll free 800-765-6475 - fax 800-765-6471 - www.kflexusa.com©March 2010 K-Flex USA. K-Flex® is a registered trademark of K-Flex USA.

Caution: Adhesive contains notable solvents and container, when not in use, should be kept closed. Keep adhesive away from sparks and open flames. Use with adequate ventilation and avoid excessive contact with the skin.

USES720-LVOC Contact Adhesive may be used for bonding elastomeric products to a variety of materials (i.e., other elastomers, metal, wood, leather, felt, concrete, etc.). The adhe-sive will make a resilient and heat-resistant bond. It is suitable for line temperatures up to 250˚F (121˚C) and 300˚F (150˚C) intermit-tent on applications requiring bonded seams and joints. When the adhesive is applied to large flat or curve surfaces, it is suitable for temperatures up to 200˚F (93˚C). The product is supplied in quarts. It contains no halogens, making it ideal for use with K-Flex ECO™ (non-halogen) insulation.

APPLICATION INSTRUCTIONSFor proper adhesion, the surfaces to which the insulation is to be applied must be thoroughly cleaned, dry, and unheated. Primed and painted surfac-es should be adhesive tested to be sure the insulation will not lift off after applica-tion. The adhesive should be thoroughly mixed. Brush or roll a thin even coat of adhesive on both surfaces to be joined.

Allow the adhesive films to become dry to the touch, but tacky, before joining the sur-faces. Press the two surfaces together. Be sure the insulation is in the desired position before the adhesive surfaces make initial contact, since the adhesive forms an instant bond, and repositioning after contact is dif-ficult. Moderate pressure should then be applied to the entire bonding area to insure complete contact. Avoid heat, sparks, and open flames, and use only proper ventila-tion. Close container after use.

720-LVOC Contact Adhesive should be applied at above 40˚F (4˚C) temperatures, and allowed to dry for 24 hours before equipment operation. Protective coatings can be applied to applications with bonded joints and seams, after allowing 24 hours dry time. Applications such as large tanks, or vessels where full adhesive coverage is required, must be allowed to dry 7 days prior to applying a protective coating.

Thinning the adhesive is not recom-mended. Common lacquer thinners (Xylol or Trichloroethylene) can be used for clean up.

Physical PropertiesColor Black

Solvents Acetone

Odor Pungent Solvent

Viscosity Medium Syrup (3,500 cP)

Solid Content 26%

Weight per gallon 7.1± .2 lbs.

Coverage 200 sq. ft. per gallon

Shelf Life 6 months in original sealed container • Storage temperature 60°F

Minimum Dry Time 2 - 4 minutes under normal conditions (1 - 10 minutes depending on conditions)

Open Time Not to exceed 10 minutes

Temperature Limits 250°F (121°C) for pipe insulation seams and joints

200°F (93°C) for full bonding sheets

Chemical Resistance Resistant to moisture, aliphetic solvents, and oils

VOC (Theoretical method) 0 gram/liter

Flash Point -4°F (-20°C)

Freight Classifications Adhesives NOS. Flammable Liquid 4620 Sub 5, class 60, Un 1133, IMDG class 3.1

PG:II (Packaging Group)

Meets EPA 40 CFR - 59 sub part 1, or SCAQMD Rule 1168 and LEED requirements