Observations of Beam Filamentation at SLM5F02 in Simulation
description
Transcript of Observations of Beam Filamentation at SLM5F02 in Simulation
Observations of Beam Filamentation at SLM5F02
in SimulationJuly 22, 2011
C. Tennant
Procedure• PARMELA model of gun
– Drive laser parameters based on measurements, assumes ideal distribution– 350 keV DC photocathode gun– Bunch charge of 135 pC, push 300K particles
• PARMELA model of merger– Use Excel (no space charge) to set quads for match to linac– Tweak quads to improve match in PARMELA (with space charge)
• PARMELA model of the linac (acceleration)– Accelerate 10° before crest– Space charge effects still appreciable in first module, use Excel to set
transverse match in the triplets (where space charge is small)• elegant model of the recirculator
– include 1D CSR model and implement “csrdrifts” (allows CSR wake to propagate beyond dipole)
– Run to middle of second p-bend SLM5F02
Recall: Beam-based Measurements
(view in Slideshow mode to view animated GIF)
st,wiggler = 418.7 fsunder-compressed
st,wiggler = 343.7 fsunder-compressed
st,wiggler = 269.2 fsunder-compressed
st,wiggler = 195.5 fsunder-compressed
st,wiggler = 126.0 fsunder-compressed
st,wiggler = 73.9 fsfully compressed
st,wiggler = 83.0 fsover-compressed
st,wiggler = 142.2 fsover-compressed
st,wiggler = 213.6 fsover-compressed
st,wiggler = 288.3 fsover-compressed
st,wiggler = 364.6 fsover-compressed
Energy and st vs QT2F08/9 Strengthover-compressedunder-compressed