Object-oriented Design - Ian Sommerville
Transcript of Object-oriented Design - Ian Sommerville
©Ian Sommerville 2004 Software Engineering, 7th edition. Chapter 14 Slide 1
Object-oriented Design
©Ian Sommerville 2004 Software Engineering, 7th edition. Chapter 14 Slide 2
Objectives
● To explain how a software design may berepresented as a set of interacting objectsthat manage their own state and operations
● To describe the activities in the object-oriented design process
● To introduce various models that can beused to describe an object-oriented design
● To show how the UML may be used torepresent these models
©Ian Sommerville 2004 Software Engineering, 7th edition. Chapter 14 Slide 3
Topics covered
● Objects and object classes
● An object-oriented design process
● Design evolution
©Ian Sommerville 2004 Software Engineering, 7th edition. Chapter 14 Slide 4
Object-oriented development
● Object-oriented analysis, design and programmingare related but distinct.
● OOA is concerned with developing an object modelof the application domain.
● OOD is concerned with developing an object-oriented system model to implement requirements.
● OOP is concerned with realising an OOD using anOO programming language such as Java or C++.
©Ian Sommerville 2004 Software Engineering, 7th edition. Chapter 14 Slide 5
Characteristics of OOD
● Objects are abstractions of real-world or systementities and manage themselves.
● Objects are independent and encapsulate state andrepresentation information.
● System functionality is expressed in terms of objectservices.
● Shared data areas are eliminated. Objectscommunicate by message passing.
● Objects may be distributed and may executesequentially or in parallel.
©Ian Sommerville 2004 Software Engineering, 7th edition. Chapter 14 Slide 6
Interacting objects
©Ian Sommerville 2004 Software Engineering, 7th edition. Chapter 14 Slide 7
Advantages of OOD
● Easier maintenance. Objects may beunderstood as stand-alone entities.
● Objects are potentially reusable components.
● For some systems, there may be an obviousmapping from real world entities to systemobjects.
©Ian Sommerville 2004 Software Engineering, 7th edition. Chapter 14 Slide 8
Objects and object classes
● Objects are entities in a software systemwhich represent instances of real-world andsystem entities.
● Object classes are templates for objects.They may be used to create objects.
● Object classes may inherit attributes andservices from other object classes.
©Ian Sommerville 2004 Software Engineering, 7th edition. Chapter 14 Slide 9
Objects and object classes
An object is an entity that has a state and a defined set ofoperations which operate on that state. The state is represented as aset of object attributes. The operations associated with the objectprovide services to other objects (clients) which request theseservices when some computation is required.
Objects are created according to some object class definition. Anobject class definition serves as a template for objects. It includesdeclarations of all the attributes and services which should beassociated with an object of that class.
©Ian Sommerville 2004 Software Engineering, 7th edition. Chapter 14 Slide 10
The Unified Modeling Language
● Several different notations for describing object-oriented designs were proposed in the 1980s and1990s.
● The Unified Modeling Language is an integration ofthese notations.
● It describes notations for a number of differentmodels that may be produced during OO analysisand design.
● It is now a de facto standard for OO modelling.
©Ian Sommerville 2004 Software Engineering, 7th edition. Chapter 14 Slide 11
Employee object class (UML)
©Ian Sommerville 2004 Software Engineering, 7th edition. Chapter 14 Slide 12
Object communication
● Conceptually, objects communicate bymessage passing.
● Messages• The name of the service requested by the calling object;
• Copies of the information required to execute the serviceand the name of a holder for the result of the service.
● In practice, messages are often implementedby procedure calls• Name = procedure name;
• Information = parameter list.
©Ian Sommerville 2004 Software Engineering, 7th edition. Chapter 14 Slide 13
Message examples
// Call a method associated with a buffer// object that returns the next value// in the buffer
v = circularBuffer.Get () ;
// Call the method associated with a// thermostat object that sets the// temperature to be maintained
thermostat.setTemp (20) ;
©Ian Sommerville 2004 Software Engineering, 7th edition. Chapter 14 Slide 14
Generalisation and inheritance
● Objects are members of classes that defineattribute types and operations.
● Classes may be arranged in a class hierarchywhere one class (a super-class) is a generalisationof one or more other classes (sub-classes).
● A sub-class inherits the attributes andoperations from its super class and may addnew methods or attributes of its own.
● Generalisation in the UML is implemented asinheritance in OO programming languages.
©Ian Sommerville 2004 Software Engineering, 7th edition. Chapter 14 Slide 15
A generalisation hierarchy
©Ian Sommerville 2004 Software Engineering, 7th edition. Chapter 14 Slide 16
Advantages of inheritance
● It is an abstraction mechanism which may beused to classify entities.
● It is a reuse mechanism at both the designand the programming level.
● The inheritance graph is a source oforganisational knowledge about domainsand systems.
©Ian Sommerville 2004 Software Engineering, 7th edition. Chapter 14 Slide 17
Problems with inheritance
● Object classes are not self-contained. theycannot be understood without reference totheir super-classes.
● Designers have a tendency to reuse theinheritance graph created during analysis.Can lead to significant inefficiency.
● The inheritance graphs of analysis, designand implementation have different functionsand should be separately maintained.
©Ian Sommerville 2004 Software Engineering, 7th edition. Chapter 14 Slide 18
UML associations
● Objects and object classes participate inrelationships with other objects and object classes.
● In the UML, a generalised relationship is indicatedby an association.
● Associations may be annotated with information thatdescribes the association.
● Associations are general but may indicate that anattribute of an object is an associated object or thata method relies on an associated object.
©Ian Sommerville 2004 Software Engineering, 7th edition. Chapter 14 Slide 19
An association model
©Ian Sommerville 2004 Software Engineering, 7th edition. Chapter 14 Slide 20
Concurrent objects
● The nature of objects as self-containedentities make them suitable for concurrentimplementation.
● The message-passing model of objectcommunication can be implemented directlyif objects are running on separate processorsin a distributed system.
©Ian Sommerville 2004 Software Engineering, 7th edition. Chapter 14 Slide 21
Servers and active objects
● Servers.• The object is implemented as a parallel process (server)
with entry points corresponding to object operations. If nocalls are made to it, the object suspends itself and waitsfor further requests for service.
● Active objects• Objects are implemented as parallel processes and the
internal object state may be changed by the object itselfand not simply by external calls.
©Ian Sommerville 2004 Software Engineering, 7th edition. Chapter 14 Slide 22
Active transponder object
● Active objects may have their attributesmodified by operations but may also updatethem autonomously using internaloperations.
● A Transponder object broadcasts anaircraft’s position. The position may beupdated using a satellite positioning system.The object periodically update the position bytriangulation from satellites.
©Ian Sommerville 2004 Software Engineering, 7th edition. Chapter 14 Slide 23
An active transponder object
class Transponder extends Thread {
Position currentPosition ;Coords c1, c2 ;Satellite sat1, sat2 ;Navigator theNavigator ;
public Position givePosition () {
return currentPosition ;}
public void run () {
while (true) {
c1 = sat1.position () ;c2 = sat2.position () ;currentPosition = theNavigator.compute (c1, c2) ;
}
}
} //Transponder
©Ian Sommerville 2004 Software Engineering, 7th edition. Chapter 14 Slide 24
Java threads
● Threads in Java are a simple construct forimplementing concurrent objects.
● Threads must include a method called run()and this is started up by the Java run-timesystem.
● Active objects typically include an infiniteloop so that they are always carrying out thecomputation.
©Ian Sommerville 2004 Software Engineering, 7th edition. Chapter 14 Slide 25
An object-oriented design process
● Structured design processes involvedeveloping a number of different systemmodels.
● They require a lot of effort for developmentand maintenance of these models and, forsmall systems, this may not be cost-effective.
● However, for large systems developed bydifferent groups design models are anessential communication mechanism.
©Ian Sommerville 2004 Software Engineering, 7th edition. Chapter 14 Slide 26
Process stages
● Highlights key activities without being tied toany proprietary process such as the RUP.• Define the context and modes of use of the
system;
• Design the system architecture;
• Identify the principal system objects;
• Develop design models;
• Specify object interfaces.
©Ian Sommerville 2004 Software Engineering, 7th edition. Chapter 14 Slide 27
Weather system description
A weather mapping system is required to generate weather maps on aregular basis using data collected from remote, unattended weather stationsand other data sources such as weather observers, balloons and satellites.Weather stations transmit their data to the area computer in response to arequest from that machine.
The area computer system validates the collected data and integrates it withthe data from different sources. The integrated data is archived and, usingdata from this archive and a digitised map database a set of local weathermaps is created. Maps may be printed for distribution on a special-purposemap printer or may be displayed in a number of different formats.
©Ian Sommerville 2004 Software Engineering, 7th edition. Chapter 14 Slide 28
System context and models of use
● Develop an understanding of the relationshipsbetween the software being designed and itsexternal environment
● System context• A static model that describes other systems in the
environment. Use a subsystem model to show othersystems. Following slide shows the systems around theweather station system.
● Model of system use• A dynamic model that describes how the system interacts
with its environment. Use use-cases to show interactions
©Ian Sommerville 2004 Software Engineering, 7th edition. Chapter 14 Slide 29
Layered architecture
©Ian Sommerville 2004 Software Engineering, 7th edition. Chapter 14 Slide 30
Subsystems in the weather mapping system
©Ian Sommerville 2004 Software Engineering, 7th edition. Chapter 14 Slide 31
Use-case models
● Use-case models are used to represent eachinteraction with the system.
● A use-case model shows the systemfeatures as ellipses and the interacting entityas a stick figure.
©Ian Sommerville 2004 Software Engineering, 7th edition. Chapter 14 Slide 32
Use-cases for the weather station
©Ian Sommerville 2004 Software Engineering, 7th edition. Chapter 14 Slide 33
Use-case description
System Weather stationUse-case ReportActors Weather data collection system, Weather stationData The weather station sends a summary of the weather data that has been
collected from the instruments in the collection period to the weather datacollection system. The data sent are the maximum minimum and averageground and air temperatures, the maximum, minimum and average airpressures, the maximum, minimum and average wind speeds, the totalrainfall and the wind direction as sampled at 5 minute intervals.
Stimulus The weather data collection system establishes a modem link with theweather station and requests transmission of the data.
Response The summarised data is sent to the weather data collection systemComments Weather stations are usually asked to report once per hour but this
frequency may differ from one station to the other and may be modified infuture.
©Ian Sommerville 2004 Software Engineering, 7th edition. Chapter 14 Slide 34
Architectural design
● Once interactions between the system and itsenvironment have been understood, you use thisinformation for designing the system architecture.
● A layered architecture as discussed in Chapter 11 isappropriate for the weather station• Interface layer for handling communications;
• Data collection layer for managing instruments;
• Instruments layer for collecting data.
● There should normally be no more than 7 entities inan architectural model.
©Ian Sommerville 2004 Software Engineering, 7th edition. Chapter 14 Slide 35
Weather station architecture
©Ian Sommerville 2004 Software Engineering, 7th edition. Chapter 14 Slide 36
Object identification
● Identifying objects (or object classes) is themost difficult part of object oriented design.
● There is no 'magic formula' for objectidentification. It relies on the skill, experienceand domain knowledge of system designers.
● Object identification is an iterative process.You are unlikely to get it right first time.
©Ian Sommerville 2004 Software Engineering, 7th edition. Chapter 14 Slide 37
Approaches to identification
● Use a grammatical approach based on a naturallanguage description of the system (used in HoodOOD method).
● Base the identification on tangible things in theapplication domain.
● Use a behavioural approach and identify objectsbased on what participates in what behaviour.
● Use a scenario-based analysis. The objects,attributes and methods in each scenario areidentified.
©Ian Sommerville 2004 Software Engineering, 7th edition. Chapter 14 Slide 38
Weather station description
A weather station is a package of software controlled instrumentswhich collects data, performs some data processing and transmitsthis data for further processing. The instruments include air andground thermometers, an anemometer, a wind vane, a barometerand a rain gauge. Data is collected periodically.
When a command is issued to transmit the weather data, theweather station processes and summarises the collected data. Thesummarised data is transmitted to the mapping computer when arequest is received.
©Ian Sommerville 2004 Software Engineering, 7th edition. Chapter 14 Slide 39
Weather station object classes
● Ground thermometer, Anemometer, Barometer• Application domain objects that are ‘hardware’ objects
related to the instruments in the system.
● Weather station• The basic interface of the weather station to its
environment. It therefore reflects the interactionsidentified in the use-case model.
● Weather data• Encapsulates the summarised data from the instruments.
©Ian Sommerville 2004 Software Engineering, 7th edition. Chapter 14 Slide 40
Weather station object classes
©Ian Sommerville 2004 Software Engineering, 7th edition. Chapter 14 Slide 41
Further objects and object refinement
● Use domain knowledge to identify more objects andoperations• Weather stations should have a unique identifier;
• Weather stations are remotely situated so instrumentfailures have to be reported automatically. Thereforeattributes and operations for self-checking are required.
● Active or passive objects• In this case, objects are passive and collect data on
request rather than autonomously. This introducesflexibility at the expense of controller processing time.
©Ian Sommerville 2004 Software Engineering, 7th edition. Chapter 14 Slide 42
Design models
● Design models show the objects and objectclasses and relationships between theseentities.
● Static models describe the static structure ofthe system in terms of object classes andrelationships.
● Dynamic models describe the dynamicinteractions between objects.
©Ian Sommerville 2004 Software Engineering, 7th edition. Chapter 14 Slide 43
Examples of design models
● Sub-system models that show logical groupings ofobjects into coherent subsystems.
● Sequence models that show the sequence of objectinteractions.
● State machine models that show how individualobjects change their state in response to events.
● Other models include use-case models, aggregationmodels, generalisation models, etc.
©Ian Sommerville 2004 Software Engineering, 7th edition. Chapter 14 Slide 44
Subsystem models
● Shows how the design is organised intologically related groups of objects.
● In the UML, these are shown usingpackages - an encapsulation construct. Thisis a logical model. The actual organisation ofobjects in the system may be different.
©Ian Sommerville 2004 Software Engineering, 7th edition. Chapter 14 Slide 45
Weather station subsystems
©Ian Sommerville 2004 Software Engineering, 7th edition. Chapter 14 Slide 46
Sequence models
● Sequence models show the sequence ofobject interactions that take place• Objects are arranged horizontally across the
top;• Time is represented vertically so models are
read top to bottom;• Interactions are represented by labelled arrows,
Different styles of arrow represent differenttypes of interaction;
• A thin rectangle in an object lifeline representsthe time when the object is the controlling objectin the system.
©Ian Sommerville 2004 Software Engineering, 7th edition. Chapter 14 Slide 47
Data collection sequence
©Ian Sommerville 2004 Software Engineering, 7th edition. Chapter 14 Slide 48
Statecharts
● Show how objects respond to different servicerequests and the state transitions triggered by theserequests• If object state is Shutdown then it responds to a Startup()
message;• In the waiting state the object is waiting for further
messages;• If reportWeather () then system moves to summarising
state;• If calibrate () the system moves to a calibrating state;• A collecting state is entered when a clock signal is
received.
©Ian Sommerville 2004 Software Engineering, 7th edition. Chapter 14 Slide 49
Weather station state diagram
©Ian Sommerville 2004 Software Engineering, 7th edition. Chapter 14 Slide 50
Object interface specification
● Object interfaces have to be specified so that theobjects and other components can be designed inparallel.
● Designers should avoid designing the interfacerepresentation but should hide this in the objectitself.
● Objects may have several interfaces which areviewpoints on the methods provided.
● The UML uses class diagrams for interfacespecification but Java may also be used.
©Ian Sommerville 2004 Software Engineering, 7th edition. Chapter 14 Slide 51
Weather station interface
interface WeatherStation {
public void WeatherStation () ;
public void startup () ;public void startup (Instrument i) ;
public void shutdown () ;public void shutdown (Instrument i) ;
public void reportWeather ( ) ;
public void test () ;public void test ( Instrument i ) ;
public void calibrate ( Instrument i) ;
public int getID () ;
} //WeatherStation
©Ian Sommerville 2004 Software Engineering, 7th edition. Chapter 14 Slide 52
Design evolution
● Hiding information inside objects means thatchanges made to an object do not affect otherobjects in an unpredictable way.
● Assume pollution monitoring facilities are to beadded to weather stations. These sample theair and compute the amount of differentpollutants in the atmosphere.
● Pollution readings are transmitted with weatherdata.
©Ian Sommerville 2004 Software Engineering, 7th edition. Chapter 14 Slide 53
Changes required
● Add an object class called Air quality as partof WeatherStation.
● Add an operation reportAirQuality toWeatherStation. Modify the control softwareto collect pollution readings.
● Add objects representing pollution monitoringinstruments.
©Ian Sommerville 2004 Software Engineering, 7th edition. Chapter 14 Slide 54
Pollution monitoring
©Ian Sommerville 2004 Software Engineering, 7th edition. Chapter 14 Slide 55
● OOD is an approach to design so that designcomponents have their own private state andoperations.
● Objects should have constructor and inspectionoperations. They provide services to other objects.
● Objects may be implemented sequentially orconcurrently.
● The Unified Modeling Language provides differentnotations for defining different object models.
Key points
©Ian Sommerville 2004 Software Engineering, 7th edition. Chapter 14 Slide 56
Key points
● A range of different models may be producedduring an object-oriented design process.These include static and dynamic systemmodels.
● Object interfaces should be defined preciselyusing e.g. a programming language likeJava.
● Object-oriented design potentially simplifiessystem evolution.