OAX200214 SoftX3000 Interconnection-SS7 Route and Trunk Data Configuration ISSUE1.0
-
Upload
samir-kara -
Category
Documents
-
view
290 -
download
44
Transcript of OAX200214 SoftX3000 Interconnection-SS7 Route and Trunk Data Configuration ISSUE1.0
![Page 1: OAX200214 SoftX3000 Interconnection-SS7 Route and Trunk Data Configuration ISSUE1.0](https://reader033.fdocuments.net/reader033/viewer/2022061123/54767b9fb4af9f5e748b4573/html5/thumbnails/1.jpg)
www.huawei.com
Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
OAX200214 SoftX3000 Interconnection-SS7 Route and Trunk Data Configuration
ISSUE 1.0
![Page 2: OAX200214 SoftX3000 Interconnection-SS7 Route and Trunk Data Configuration ISSUE1.0](https://reader033.fdocuments.net/reader033/viewer/2022061123/54767b9fb4af9f5e748b4573/html5/thumbnails/2.jpg)
Page2Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
References
U-SYS SoftX3000 Operation Manual-Configuration
Guide
Configuring Routing Data
Configuring Trunk Data
![Page 3: OAX200214 SoftX3000 Interconnection-SS7 Route and Trunk Data Configuration ISSUE1.0](https://reader033.fdocuments.net/reader033/viewer/2022061123/54767b9fb4af9f5e748b4573/html5/thumbnails/3.jpg)
Page3Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
Objectives
Upon completion of this course, you will be able to:
Describe the basic concepts on route and trunk.
Configure the SS7 route and trunk.
![Page 4: OAX200214 SoftX3000 Interconnection-SS7 Route and Trunk Data Configuration ISSUE1.0](https://reader033.fdocuments.net/reader033/viewer/2022061123/54767b9fb4af9f5e748b4573/html5/thumbnails/4.jpg)
Page4Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
Contents
1. Related Concepts
2. Configuring Route&Trunk
3. Route Analysis
![Page 5: OAX200214 SoftX3000 Interconnection-SS7 Route and Trunk Data Configuration ISSUE1.0](https://reader033.fdocuments.net/reader033/viewer/2022061123/54767b9fb4af9f5e748b4573/html5/thumbnails/5.jpg)
Page5Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
Contents
1. Related Concepts
2. Configuring Route&Trunk
3. Route Analysis
![Page 6: OAX200214 SoftX3000 Interconnection-SS7 Route and Trunk Data Configuration ISSUE1.0](https://reader033.fdocuments.net/reader033/viewer/2022061123/54767b9fb4af9f5e748b4573/html5/thumbnails/6.jpg)
Page6Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
Interconnection Between Offices
![Page 7: OAX200214 SoftX3000 Interconnection-SS7 Route and Trunk Data Configuration ISSUE1.0](https://reader033.fdocuments.net/reader033/viewer/2022061123/54767b9fb4af9f5e748b4573/html5/thumbnails/7.jpg)
Page7Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
Concepts
Office direction
If there are direct voice path between local office and
another office, the opposite office is the office direction
of local office.
Sub-route
If there are direct voice path between two offices,
there is a sub-route between these two offices.
Route
The association of sub-route from local office to
another office
![Page 8: OAX200214 SoftX3000 Interconnection-SS7 Route and Trunk Data Configuration ISSUE1.0](https://reader033.fdocuments.net/reader033/viewer/2022061123/54767b9fb4af9f5e748b4573/html5/thumbnails/8.jpg)
Page8Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
Example for concepts
222
Local office
666 Office direction 3
1#sub-route
3#sub-route
2#sub-route 888
Office direction 1
555 Office direction 1
Office
direction
Route Sub-route 1 Sub-route 2
222→555 1 1
222→888 2 1 2
222→666 3 2
![Page 9: OAX200214 SoftX3000 Interconnection-SS7 Route and Trunk Data Configuration ISSUE1.0](https://reader033.fdocuments.net/reader033/viewer/2022061123/54767b9fb4af9f5e748b4573/html5/thumbnails/9.jpg)
Page9Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
How does system analyze?
Route analysis progress:
Analyzesubscriberattribute
Analyze prefixnumber
Caller Callee
RouteselectionSourceCode
RouteSelection
CodeCharging
mode Route
Charging
mode Route+
+
![Page 10: OAX200214 SoftX3000 Interconnection-SS7 Route and Trunk Data Configuration ISSUE1.0](https://reader033.fdocuments.net/reader033/viewer/2022061123/54767b9fb4af9f5e748b4573/html5/thumbnails/10.jpg)
Page10Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
SS7 Trunk Group
SS7 trunks can be classified as TUP ISUP
Important parameters for SS7 trunk CIC (Circuit Identification Code)
Uniquely identifies the trunk circuit between two
signaling points.
Master/slave Preventing the two offices occupying the same trunk
circuit at the same time. The office with larger signaling code usually controls the
even CIC, while the other usually controls the odd CIC.
![Page 11: OAX200214 SoftX3000 Interconnection-SS7 Route and Trunk Data Configuration ISSUE1.0](https://reader033.fdocuments.net/reader033/viewer/2022061123/54767b9fb4af9f5e748b4573/html5/thumbnails/11.jpg)
Page11Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
Contents
1. Related Concepts
2. Configuring Route&Trunk
3. Route Analysis
![Page 12: OAX200214 SoftX3000 Interconnection-SS7 Route and Trunk Data Configuration ISSUE1.0](https://reader033.fdocuments.net/reader033/viewer/2022061123/54767b9fb4af9f5e748b4573/html5/thumbnails/12.jpg)
Page12Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
Configuration Procedure
![Page 13: OAX200214 SoftX3000 Interconnection-SS7 Route and Trunk Data Configuration ISSUE1.0](https://reader033.fdocuments.net/reader033/viewer/2022061123/54767b9fb4af9f5e748b4573/html5/thumbnails/13.jpg)
Page13Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
2
Route selection policy Perferential trunk, sub-route and trunk group
selection policy
3Basic routing data planning
Office direction, route and corresponding sub-route
1
Route planning
Direct route or alternative route according to
networking
Preparations
4 Circuit selection mode in a trunk group
![Page 14: OAX200214 SoftX3000 Interconnection-SS7 Route and Trunk Data Configuration ISSUE1.0](https://reader033.fdocuments.net/reader033/viewer/2022061123/54767b9fb4af9f5e748b4573/html5/thumbnails/14.jpg)
Page14Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
Preparations
6Group direction
Incoming, outgoing or bidirectional
7Trunk group type
TUP or ISUP
5Values need be negotiated
OPC and DPC, start CIC, TID of the circuit
8 Range of circuit number
![Page 15: OAX200214 SoftX3000 Interconnection-SS7 Route and Trunk Data Configuration ISSUE1.0](https://reader033.fdocuments.net/reader033/viewer/2022061123/54767b9fb4af9f5e748b4573/html5/thumbnails/15.jpg)
Page15Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
Configuration Steps
Step Description Command
1 Add office direction ADD OFC
2 Add sub-route ADD SRT
3 Add route ADD RT
4 Add route analysis ADD RTANA
5 Add SS7 trunk group ADD N7TG
6 Add SS7 trunk circuit ADD N7TKC
7 Prefix number analysis ADD CNACLD
![Page 16: OAX200214 SoftX3000 Interconnection-SS7 Route and Trunk Data Configuration ISSUE1.0](https://reader033.fdocuments.net/reader033/viewer/2022061123/54767b9fb4af9f5e748b4573/html5/thumbnails/16.jpg)
Page16Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
Example
Office A SP: 3000A1
IP
AMG
Office B SP: 00CC08
M2UA
190.1.1.1/16
190.1.1.5/16
SRT=10,TG=10, CIC=0~30
UMG8900 MID:190.2.89.1:2944
DN: 555XXXX
![Page 17: OAX200214 SoftX3000 Interconnection-SS7 Route and Trunk Data Configuration ISSUE1.0](https://reader033.fdocuments.net/reader033/viewer/2022061123/54767b9fb4af9f5e748b4573/html5/thumbnails/17.jpg)
Page17Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
ADD OFC
ADD OFC: O=10, ON="B", DOT=CMPX, DOL=LOW,
DPC1="CC08";
![Page 18: OAX200214 SoftX3000 Interconnection-SS7 Route and Trunk Data Configuration ISSUE1.0](https://reader033.fdocuments.net/reader033/viewer/2022061123/54767b9fb4af9f5e748b4573/html5/thumbnails/18.jpg)
Page18Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
ADD SRT
ADD SRT: SRC=10, O=10, SRN="TO B";
![Page 19: OAX200214 SoftX3000 Interconnection-SS7 Route and Trunk Data Configuration ISSUE1.0](https://reader033.fdocuments.net/reader033/viewer/2022061123/54767b9fb4af9f5e748b4573/html5/thumbnails/19.jpg)
Page19Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
ADD RT
ADD RT: R=10, RN="to B", SRST=SEQ, SR1=10,
TRIPFLAG=NO;
![Page 20: OAX200214 SoftX3000 Interconnection-SS7 Route and Trunk Data Configuration ISSUE1.0](https://reader033.fdocuments.net/reader033/viewer/2022061123/54767b9fb4af9f5e748b4573/html5/thumbnails/20.jpg)
Page20Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
ADD RTANA ADD RTANA: RSC=10, RSSC=0, RUT=ALL, SAI=ALL,
CLR=ALL, TP=ALL, TMX=0, R=10, ISUP=ISUP_F,
NCAI=ALL, CST=NONE;
![Page 21: OAX200214 SoftX3000 Interconnection-SS7 Route and Trunk Data Configuration ISSUE1.0](https://reader033.fdocuments.net/reader033/viewer/2022061123/54767b9fb4af9f5e748b4573/html5/thumbnails/21.jpg)
Page21Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
Parameter Description
Route selection code (relative to the called prefix)
Define the classification of the outgoing route selection
policy for the caller
Defined in “ADD RTANA”, while referred to in “ADD
CNACLD”
Route selection source code (relative to the call source)
Define the classification of the outgoing route selection
policy for called prefix
Defined in “ADD CALLSRC”, while referred to in “ADD
RTANA”
![Page 22: OAX200214 SoftX3000 Interconnection-SS7 Route and Trunk Data Configuration ISSUE1.0](https://reader033.fdocuments.net/reader033/viewer/2022061123/54767b9fb4af9f5e748b4573/html5/thumbnails/22.jpg)
Page22Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
ADD N7TG ADD N7TG: TG=10, EID="190.1.30.1:2944", G=INOUT,
SRC=10, SOPC="001122", SDPC="003344", TGN="TO
B", CSC=10;
![Page 23: OAX200214 SoftX3000 Interconnection-SS7 Route and Trunk Data Configuration ISSUE1.0](https://reader033.fdocuments.net/reader033/viewer/2022061123/54767b9fb4af9f5e748b4573/html5/thumbnails/23.jpg)
Page23Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
ADD N7TKC ADD N7TKC: MN=22, TG=10, SC=0, EC=31, SCIC=0,
SCF=TRUE, TID="32";
![Page 24: OAX200214 SoftX3000 Interconnection-SS7 Route and Trunk Data Configuration ISSUE1.0](https://reader033.fdocuments.net/reader033/viewer/2022061123/54767b9fb4af9f5e748b4573/html5/thumbnails/24.jpg)
Page24Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
Start circuit number, End circuit number
Unified logical numbers assigned in a particular
FCCU/FCSU module to E1 trunk circuits
The absolute value of the difference between the start
circuit number and the start circuit termination
identifier must be a multiple of 32, such as 0, 32, 64,
and 96.
Start circuit termination ID
The identifier of the start circuit timeslot of a specified
batch of trunk circuits in the resident trunk media
gateway
In UMG8900, use ”LST TDMIU” to check this value.
Parameter Description
![Page 25: OAX200214 SoftX3000 Interconnection-SS7 Route and Trunk Data Configuration ISSUE1.0](https://reader033.fdocuments.net/reader033/viewer/2022061123/54767b9fb4af9f5e748b4573/html5/thumbnails/25.jpg)
Page25Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
ADD CANCLD ADD CNACLD: PFX=K'555, CSA=LC, RSC=10, MINL=7,
MAXL=7, CHSC=0, EA=NO;
![Page 26: OAX200214 SoftX3000 Interconnection-SS7 Route and Trunk Data Configuration ISSUE1.0](https://reader033.fdocuments.net/reader033/viewer/2022061123/54767b9fb4af9f5e748b4573/html5/thumbnails/26.jpg)
Page26Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
Maintenance Commands
Commands Description
LST OFC List office direction data configuration
LST SRT List sub-route data configuration
LST RT List route data configuration
LST RTANA List route analysis data configuration
LST TG List trunk group data configuration
LST TKC List trunk circuit data configuration
DSP TKC Query trunk circuit state
DSP N7C Display SS7 trunk circuit state
DSP OFTKDisplay the trunk circuits state of the
specified office direction
DSP OFTSDisplay SS7 trunk circuits in the specified
state
![Page 27: OAX200214 SoftX3000 Interconnection-SS7 Route and Trunk Data Configuration ISSUE1.0](https://reader033.fdocuments.net/reader033/viewer/2022061123/54767b9fb4af9f5e748b4573/html5/thumbnails/27.jpg)
Page27Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
Operation Commands
Commands Description
RST TKC Reset trunk circuit
SRS N7C Stop resetting the No.7 trunk circuit
BLK N7C Block the No.7 trunk circuit
SBL N7C Stop blocking the No.7 trunk circuit
UBL N7C Unblock the No.7 trunk circuit
SUL N7C Stop unblocking the No.7 trunk circuit
STR N7COT Start No.7 trunk circuit continuity check
STP N7COT Stop No.7 trunk circuit continuity check
![Page 28: OAX200214 SoftX3000 Interconnection-SS7 Route and Trunk Data Configuration ISSUE1.0](https://reader033.fdocuments.net/reader033/viewer/2022061123/54767b9fb4af9f5e748b4573/html5/thumbnails/28.jpg)
Page28Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
Contents
1. Related Concepts
2. Configuring Route&Trunk
3. Route Analysis
![Page 29: OAX200214 SoftX3000 Interconnection-SS7 Route and Trunk Data Configuration ISSUE1.0](https://reader033.fdocuments.net/reader033/viewer/2022061123/54767b9fb4af9f5e748b4573/html5/thumbnails/29.jpg)
Page29Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
RSSC RSC
RT
Circuit
Trunkgroup
SRT
Start
Analysis procedure
ADD RTANAADD RTANASub-route selection mode
Group selection mode
Circuit selection mode
![Page 30: OAX200214 SoftX3000 Interconnection-SS7 Route and Trunk Data Configuration ISSUE1.0](https://reader033.fdocuments.net/reader033/viewer/2022061123/54767b9fb4af9f5e748b4573/html5/thumbnails/30.jpg)
Page30Copyright © 2006 Huawei Technologies Co., Ltd. All rights reserved.
Summary
This course introduces the configuration of SS7 route
and trunk data, as well as some important analysis
steps.
![Page 31: OAX200214 SoftX3000 Interconnection-SS7 Route and Trunk Data Configuration ISSUE1.0](https://reader033.fdocuments.net/reader033/viewer/2022061123/54767b9fb4af9f5e748b4573/html5/thumbnails/31.jpg)
Thank youwww.huawei.com