OAG O&G Corporate Profile

OAG GROUP OF COMPANIES

OAG Engineering Sdn. Bhd. (502076-K)

OAG Offshore Sdn. Bhd. (631808-U)

OAG International Ltd. (18362-Samoa)

Corporate Profile Oil & Gas Division

1. About OAG Oil & Gas Division 1

2. Company Profile 3

3. Project Management Services 4

4. Construction Management Services 6

5. Engineering and Inspection Services 8

6. Pipeline Joint In Fill & Coating Services 9

7. Past Projects 14

8. Contact Details 21

© 2008 OAG Group of Companies - Oil & Gas Division. All Rights Reserved. 1

1. ABOUT OAG OIL & GAS DIVISION

OAG Group of Companies ('OAG') was established in 1999 and based in Kuala Lumpur,

Malaysia. Since our inception, we have specialized in the provision of professional and

consultancy services for the oil and gas industries through our Oil & Gas Division which

consists of the following companies:

� OAG Engineering Sdn. Bhd.

� OAG Offshore Sdn. Bhd.

� OAG International Ltd.

We provide services for all stages from the design phase right through to and beyond the

construction phases to commissioning.

OAG's directors and associates combine consultancy experience and qualifications with

wide-ranging experience in the oil, gas and engineering industry. OAG's directors have direct

experience of management of major projects in a variety of countries and environments

and, as such, we are well qualified to understand and rapidly respond to the needs of

different clients and situations.

OAG has succeeded in providing professional and consultancy services to companies in

Malaysia and around the region, namely Thailand, Indonesia and Vietnam.

We have extensive experience and have worked in close cooperation with many reputable

companies including multinationals. Please refer to section 8: Past Projects.

OAG offers the following professional and consultancy services for the oil and gas industries.

� Project Management Services

� Construction Management Services

� Engineering and Inspection Services

� Pipeline Field Joint InFill & Coating Services


Organization Chart

The organization of OAG is mainly made up of a team of administration personnel headed

by the Managing Director who has extensive experience in construction and development

of oil and gas facilities.

OAG currently has under its employment, over 20 personnel all under full time direct

employment with the company. Additional personnel are hired from time to time to meet

the requirements of our projects and to support the needs of our clients.

The organization chart for OAG is provided below.

ORGANIZATION CHART

Managing Director

Jonathan Chong

Business Development Manager

James Ng

Engineering Department Admin & Accounts

• Faizah Ibrahim

• Noorni Zakiah Khalid

• Nor Dilawati Abu Talib

• Suhaila Asmuni

• Suriani Shamsudin

Field Engineers

• Anuarriduan Abd Jalil

• Mohd Redzuan

Samsudin

• Mohd Shafiq Suhaimi

• Teo Swee TeckDesign Engineer

• Samuel See

Technician

• Mohamad Norhadi Ibrahim

• Ang Peng Kheong

• Devandran a/l Arumugam

• Mohd Akhmal Haizam Idris

• Mohd Farid Zaini

• Puventhara s/o Sundra Sagam

• G. Thevagar s/o Gurunathan

• Ahmad Khairul Za’im Ismail

Sales & Support

• Siti Hasmah Mohamad

• Nik Hasrin Farrini Hassan

• Mimi Musyahirah Maharam

• Yuniza Md YusopProject Engineer

•Yutthana Jantarapitak

• Aainaa Basitah Abd Rani


2. COMPANY PROFILE

Corporate Name : OAG Group of Companies

Business Office : Box No. 388, Suite 7.15, Level 7

Wisma Central, Jalan Ampang

50450 Kuala Lumpur

Malaysia

OAG Engineering OAG Offshore OAG International

Type of Entity Sdn Bhd Sdn Bhd Limited (by shares)

Registration

Place Malaysia Malaysia Singapore

Date 23 Dec 1999 20 Oct 2003 30 Sep 2004

Reference 502076-K 631808-U 183362

Equity

Shareholder 1 Jonathan Chong Jonathan Chong Jonathan Chong

Nationality Malaysian Malaysian Malaysian

Share Equity 90% 51% 50%

Shareholder 2 Deanna Goh OAG Engineering Deanna Goh

Nationality Malaysian - Malaysian

Share Equity 10% 49% 50%


3. PROJECT MANAGEMENT SERVICES

OAG specializes in providing project management services for any or all phases of a project.

Our project managers have extensive expertise to perform the following tasks proficiently.

� Direct, support and coordinate the engineering, drafting, construction, engineering

and inspection activities of any job whether large or small;

� Oversee and direct both internal company support work and third party

subcontractors to ensure that budget and schedule constraints are met;

� Work as the right hand of the client to carry out all required tasks;

� Play an integral role in defining the infrastructure needed to support project

execution;

� Ensure coordination between the various resources and activities, which is necessary

for the entire project phases; and

� Customize a reporting program that is most sensible to the client.

Our project managers are experienced, hands-on engineers and they have the knowledge

to fully understand the interrelationships necessary to efficiently resolve technical project

issues.

The project management process evolves through several key project areas as described

below.

Project Initiation & Planning

� Focus on preparation.

� Define and clarify the basis that will dictate subsequent project activities.

� Establish processes to clearly define mutual objectives and to eliminate the

ambiguities often associated with the work scope, work responsibilities, and work

relationships.

� Develop schedules, execution plans, subcontracting strategies, budgets, reporting

format and frequency, risk quantification, and QA/QC requirements. For larger

projects, define the role, authority and relationships between all interacting

companies.


� Establish a communication plan to ensure complete and accurate information

dissemination during the project.

Execution and Control

� Focus on performance.

� Manage and monitor progress, resource, cost, scope change, performance quality

and document with timely reporting.

� Monitor performance by measuring progress against project forecasts.

� Tailor reporting system to meet individual needs.

� Identify potential problems and suggest alternate approaches for successful project

completion.

Project Close-out

� Close out project properly.

� Complete documentation to leave client with all necessary information to

subsequently track all aspect of the project and its final configuration.

OAG strives to develop and maintain strong allegiances among its clients. Our innovative

approach oversees the success of each project to ensure that each client's expectations are

fully met.


4. CONSTRUCTION MANAGEMENT SERVICES

OAG has the relevant expertise to perform offshore installation and construction. Due to our

extensive experience, we able to perform most of the engineering required to support the

activities of fabrication and offshore installation work.

Engineering studies that cannot be performed in-house, can be outsourced to affiliates, who

are specialist in their respective fields.

The engineering work that can be offered by OAG includes all engineering required for the

installation of offshore facilities i.e. including platforms, pipelines and risers, mooring buoys,

storage facilities and transportation of these facilities.

The following engineering works are anticipated for typical offshore installation work:

Facility Engineering Work Description

Platform • Pile driveability, stick-up, pick-up, conductor hang off

studies.

• On-bottom stability studies.

• Lifting, rigging and structural components integrity check.

• Launch, floatation and pending.

• Installation aids design.

• Procedures for installation of platforms, storage and other

facilities.

Pipeline • Pipelay, initiation, abandonment analyses, Pipeline lifting

analyses for risers installation.

• Allowable weld excavation length.

• Pipeline and riser installation procedures.

Loadout &

Transportation

• Transportation (motion) and stability, tie-down and

seafastening.

• Linepipe stacking height

• Loadout procedures


With our extensive experience, the above installation engineering work can be performed

with the primary objective of producing a more efficient design from the stand point of

offshore installation aspect of the work, while fulfilling all requirements of the specifications,

codes and standards.

Verification and Review Services

OAG also perform review and verification of offshore installation on behalf of verification

authorities and oil and gas companies.

OAG is able to offer this expertise to ensure that facilities are being installed in accordance

with the relevant codes, standards and specifications. This service will greatly benefit facilities

owners as it will ensure maximum compliance by contractors during offshore installation and

therefore minimize the occurrence of defects resulting from installation activities. The defects

that may occur otherwise, may be defects that can only be detected after several years of

facility operation, possibly resulting in deterioration in the operation of the facilities and

reduced operating life.

The usually short duration of offshore installation activities does not justify the requirement for

a full time expert/specialist in offshore installation to perform verification services. Therefore,

this service by OAG offers the following advantages to facilities owners, to ensure

compliance with the company specifications, codes and standards, during installation of the

facilities:

� Commercially attractive option where specialists need not be hired fulltime but

instead only during the short planning and execution stage;

� Relieve facilities owner from task of sourcing personnel as experts and specialists in

this field are few in number.


5. ENGINEERING AND INSPECTION SERVICES

Engineering and Inspection Services are an integral factor of a successful project

management in the oil and gas industry. The necessary requirements are personnel with

experience, expertise, certifications and relevant training.

OAG offers engineers and inspection personnel with the appropriate credentials necessary

to verify compliance with customer specifications. These include AWS certified welding

inspectors, NACE certified coating inspectors, API and ASME qualified inspectors, as well as

ASNT rated inspectors. This guarantees the highest level of performance by contractors in

any marine construction or pipeline environment.

Our experienced personnel have been involved in the following disciplines.

� Ultra deep water pipe lays, directional drills, beach approaches, river crossings, high

temperature, and H2S pipelines.

� Platform, deck and module construction, metering facilities, pressure vessels,

interconnecting piping, along with instrumentation and electrical inspections.

Our personnel maintain a communication link with our clients to ensure proper exchange of

information that is critical to the successful completion of the project.


6. PIPELINE FIELD JOINT IN-FILL & COATING

OAG is a specialist for the application of High Density Polyurethane Foam (HDPUF) for

pipeline field joint in-fill. The product is made up of a two liquid chemical system i.e. Polyol

and Isocyanate.

The purpose of the HDPUF system is to fill up the area of the pipeline field joint so that the

outer diameter of the pipeline at the field joint area is approximately the same as the other

sections of the pipeline.

The purpose of this includes:

1) To provide protection to the pipeline at the field joint location,

2) To provide a homogeneous outside diameter for the entire length of the pipeline to allow

the pipe to move smoothly over the rollers and

3) In some instances, to provide insulation to the pipeline at the field joint area.


HDPUF Chemical Profile

General Properties

Item Description Specification

1 Appearance Light Brown Liquid

2 Specific Gravity@ 25°C 1.04 – 1.06 g/cm³

3 Viscosity @ 25°C 270 – 430 mPa.s


1 Appearance Dark Brown Liquid

2 Specific Gravity@ 25°C 1.22 – 1.26 g/cm³

3 Viscosity @ 25°C 150 – 250 mPa.s

Typical Reaction Data


1 Mixing Ratio 100 : 118

2 Chemical Temperature 25-35 ºC

3 Cream Time 28-30 sec.

4 Gel Time 53-55 sec.

5 Free Rise Cup Density 120-126 kg/m³


Product Specifications & Properties

Property Test Standard Unit Value

Overall Moulded Density ASTM D1622 kg/m³ (pcf) 130-190 (8-12) / or to suit

Client’s requirement

Compressive Strength

(10% deflection) ASTM D1621 MPa (psi) 1.3 (185)

Compressive Strength

(90% deflection) ASTM D1621 MPa (psi) 6.7 (967)

Open Cell Content ASTM D2856 % 90

Note : When tested in field at 6.5 minutes demoulds and a load of 125 psi is applied, a

deflection of 4- 6 mm was observed.

Impact Test Results (max 35.5mm deflection)

Equipment

The equipment that will be utilized for the work is PU foam proportioning/metering unit. The

general specifications of the proportioning/metering units are as follows:

1) Metering Pump with delivery capacity - between 25 to 130kg/minute.

2) Tank Volume – 90dm3

3) Total Power – 14kW

4) Air Consumption – 130 NI/shot

5) Dimensions – Base Unit : 1.2m x 1.2m x 1.6m

6) Metering Pump with delivery capacity – up to 15kg/minute.


Advantages of HDPU Foam against Mastic

HDPUF have been used for pipeline installation since the early 1980’s and have proven to

be advantageous in the following areas:

� Non hazardous – the chemicals and final product do not emit toxic fumes when

dispensed and provides a safe environment for personnel in the field joint station.

� Handling – The chemicals expand approximately 6 times the actual volume.

Therefore, 6 times less materials to handle, store and transport.

� Easy Application – Dispensing the chemicals do not require high temperature and

therefore eliminate the hazard of burns to the personnel.

� Chemicals ready to be used immediately, does not need high labor to prepare.

PU Foam proportioning/metering units


Other Related Products In addition to the provision of HDPUF application services, OAG Engineering Sdn. Bhd. is able

to provide the following product for pipeline field joint application:

• Cold Applied Anti Corrosion Tape Wrap – BITUTAPE 165PVC

• BITUTAPE 165PVC is a cold applied anti corrosion tape wrap that has been proven as an

effective an anti corrosion coating for pipeline field joints.

• BITUTAPE 165PVC can be applied to suit the requirement of the designers i.e. by spiral

wrap or cigarette wrap methods.

The general specification of BITUTAPE 165PVC is as follows:

Properties Standard Unit Value

Backing Color - - Black / Blue

Backing Type - - PVC

Backing Thickness ASTM D 1000 microns 750

Total Thickness ASTM D 1000 mm 1.65

Tensile Strength ASTM D 638 N/mm2 28.7

Elongation BS 2782 % 290

Tape Strength ASTM D 1000 N/mm >12

Tear Resistance ASTM D 1004 N >75

Adhesion to Primed Steel ASTM D 1000 N/mm 5

Adhesion to Self ASTM D 1000 N/mm 8

Impact Resistance DIN 30672 N.M 25

Di Electric Strength BS 2782 Kv >40

Insulation Resistance ASTM D 257 Ohms 9.8 x 1013

Cathodic Disbondment

Resistance

ASTM G 8 mm <10

Water Vapor Transmission ASTM E 90 gms/m2/24 hrs 0.88

Water Absorption ASTM D 570 % 0.01

Resistance to Bacterial Attack ASTM G21 oC Excellent

Application Temperature oC +5 to +50

Service Temperature -20 to +100


7. PAST PROJECTS

List of the main Projects undertaken since commencement of operation/ business:

February 2000 to mid 2002

Client Germanischer Lloyd (Malaysia) Sdn. Bhd.

Project Cakerawala Gas Field Development Project for Carigali-Triton Operating

Company

Scope of Work � Provision of Technical/Engineering Services/Personnel for

fabrication and construction of offshore facilities

� Provision of Inspection Services/Personnel for the offshore

installation and construction of offshore facilities

December 2000

Client Icon Engineering Pte. Ltd

Project Installation of Platform at Bunga Kekwa field for Lundin

Scope of Work Provision of Supervisory and rigging /welding personnel for the offshore

construction.

December 2001 to May 2002

Client Saipem Asia (M) Sdn. Bhd.

Project Wenchang, China and Batam.

Scope of Work Provision of Safety personnel for the offshore construction activities.

January 2002 to April 2002


Project Gas Transmission and Distribution Project Sakernan-Kuala Tungkal at

Hicom Petro-Pipes Sdn. Bhd.

Scope of Work Provision of Inspection Services/Personnel for the fabrication of spiral

welded carbon steel tubulars.


March 2002 to July, 2002

Client Global Offshore Malaysia Sdn. Bhd.

Project � Installation and testing of subsea pipelines for Chevron (Thailand)

� Offshore Installation of platform and pipelines in Semarang Kecil

field for Petronas Carigali Sdn. Bhd.

Scope of Work Provision of Pigging and hydrotesting services including supply of

manpower, equipment and instrumentation for the project.

Mid 2002 to Mid 2003


Project BRA CCP Topside Project, Vinashin Site Vietnam for Talisman Energy.

Scope of Work Provision of Technical/Engineering/Inspection/Personnel for fabrication

and construction of offshore facilities.

End 2002 to Mid 2003


Scope of Work

& Project

Location

Provision of Inspection Services at Brooke Dockyard, Kuching Sarawak for

Talisman Malaysia Ltd.

Early 2003 to Mid 2003


Project Location Muthurajah Tank, Wattala Sri Lanka for Intec

Scope of Work Provision of Inspection and surveillance services

Year 2003 to 2004

Client PT Sempec Indonesia

Project Betara Complex Development Project – Phase 3

Scope of Work Provision of technical support for development of installation procedures

to complete the installation of the terminal.


Year 2003 to 2005


Project &

Location

PM-3 CAA Phase 2 & 3 Development, MSE Pasir Gudang, Johor Malaysia

for Talisman Malaysia Sdn. Bhd.

Scope of Work Provision of Technical/Engineering Services/Personnel for fabrication and

construction of offshore facilities.

Mid 2003 to End 2004


Project Offshore, Talisman 35-A & BR-K Hook-up & Commissioning

Scope of Work Provision of Inspection Services.

April 2003 to End 2005

Client Carigali-Triton Operating Company (CTOC)

Project Location Offshore Cakerawala, JDA Gas Field, Malaysian-Thailand.

Scope of Work Provision of Technical, Engineering and Inspection Services.


Client Pegasus Oil & Gas Consultants Sdn. Bhd

Project Location Offshore /onshore Iran

Scope of Work Provision of the Engineering services


Client Nippon Steel Construction (M) Sdn. Bhd.

Project Location Offshore/onshore Sarawak for Sarawak Shell Bhd.

Scope of Work Provision of the Technical, Engineering services.

Mid 2003

Client Oilfield Pipeline Inspection Sdn. Bhd.

Project Transportation & Installation of Offshore Facilities in Sarawak for Sarawak

Shell Berhad, pre-commissioning of 32” B11DR-A to E11R-B Pipeline.

Scope of Work Provision of Dewatering, Vacuum Drying and Nitrogen Packing for Nippon

Steel Construction Sdn. Bhd.


Mid 2003 to Present


Project Talisman Hook-Up & Commissioning Project, Kemaman Supply Based,

Terengganu, Malaysia.

Scope of Work Provision of the Technical, Engineering services.

End 2003

Client Nippon Steel Construction (M) Sdn. Bhd.

Project Transportation & Installation of Offshore Facilities in Sarawak for Sarawak

Shell Berhad, pre-commissioning of 32” B11DR-A to E11R-B Pipeline.

Scope of Work Supply of the equipments and spares.

Year 2004


Project Trans Thai Malaysia Pipeline Project, Sungai Petani, Kedah Malaysia.

Scope of Work Provision of the Inspection Services.

Year 2004 to 2005


Project Development of the facilities for Sudan Oil Field.

Scope of Work Provision of the Inspection Services.

Year 2005

Client Geocean SAS

Project Sakhalin Project

Scope of Work Provision of construction technical personnel for the installation of

pipeline.

Year 2005 - 2007

Client PT GL Nusantara

Project Kerisi Development Project

Scope of Work Provision of inspection services for fabrication of crane and pipe coating.


Year 2005 to 2008


Project Cakerawala Gas Field Development

Scope of Work Provision of inspection services for hook up and commissioning.

Year 2005


Project Ruby B Topsides

Scope of Work Provision of marine warranty services for the load out of Ruby B Topsides.

Year 2005 to Present


Project Bulan, Bumi, Suriya Field Development Project

Scope of Work Provision of technical, engineering and inspection services.

Year 2006

Client PT Geocean Indonesia

Project PGN Phase 1, South Sumatera – West Java Gas Pipeline Project

Scope of Work Provision of HDPUF application for pipeline field joint in-fill.

Year 2006

Client APECS Offshore Pte Ltd

Project ABU A 6” and 8” Pipeline Installation (RENTIS Technique)

Scope of Work Provision of HDPUF application for pipeline field joint in-fill.

Year 2007 to Present


Project Bulan, Bumi, Suriya Field Development

Scope of Work Provision of inspection services for hook-up and commissioning.

Year 2007

Client Leighton Contractors Singapore

Project MPA Singapore / Pasir Panjang & Pulau Bukom Pipelines

10.75” OD x 6km x 2 lines

Scope of Work Provision of HDPUF application and Inspection Personnel for pipeline field

joint in-fill.


Year 2007


Project Northern Field Pipeline Installation Project.

Scope of Work Provision of Inspection Personnel.

Year 2007

Client JFE Engineering (S) Pte. Ltd.

Project PetroVietnam / DQR – 30” Onshore & Offshore pipeline

Scope of Work Provision of equipment and manpower for pipeline field joint in-fill.

Year 2007 - Present


Project MTJDA B-17 Field Development for Carigali – PTTEPI Operating Company

Sdn. Bhd. (CPOC)

Scope of Work Provision of Inspection Personnel for QA/QC Services.

Year 2007 - Present

Client PT Java Velosi Mandiri, Indonesia

Project North Belut Project, ConocoPhillips Inc. Ltd.

Scope of Work Provision of inspection services for fabrication of crane and pipe coating.

Year 2007

Client Sapura Acergy Sdn Bhd

Project Kikeh Gas Pipeline Project – Murphy Oil Malaysia

Scope of Work Subcontract services for the supply of equipment, personnel and

materials for the application of HDPUF for pipeline field joint in-fill and

supervision of Heat Shrink Sleeves (HSS) application.

Year 2007

Client Kencana HL Sdn Bhd

Project Puteri Field Development Project – Riser and PLEM Field Joints for Petronas

Carigali Sdn Bhd


materials for the application of HDPUF for pipeline field joint in-fill and

Heat Shrink Sleeves (HSS) for riser field joint.


Year 2007 - 2008

Client Det Norske Veritas AS, Vietnam (DNV)

Scope of Work Provision of Services for Civil Engineer.

Year 2007 - 2008

Client Germanischer Lloyd Industrial Services (GL Vietnam)

Project Block 9 – 2, CNV Oilfield Project for Hoan Vu Joint Operating Company

(HVJOC).

Scope of Work Provision of QA/QC Engineer.

Year 2007 - 2008

Client Bureau Veritas Thailand

Project Pipeline Installation Project for Total E & P Myanmar

Scope of Work Provision of Inspection Personnel – Safety Officer.

Year 2007 - 2008


Project Northern Field Development Project (BOA).

Scope of Work Provision of Coating Inspector.

Year 2008


Project Bunga Orkid – A, Central Processing Platform.

Scope of Work Provision of Safety Officer.

Year 2008

Client Swiber Offshore Construction Pte. Ltd.

Project Puteri Field Development Project for Petronas Carigali Sdn. Bhd.

Scope of Work Provision of Inspection Personnel - QA/QC Services for Pipeline Installation.

Year 2008

Client Barmada McDermott

Scope of Work Provision of Inspection Personnel for QA/QC Services of G7 CRA Pipe

Receiving Inspection for Sarawak Shell Berhad.


Year 2008


Scope of Work Provision of Inspection Personnel for SADERI Project for Sarawak Shell

Berhad.

Year 2008


Project Sarawak Gas Development Project – Field Joint coating for pre-installed

risers for Murphy Sarawak Oil Co.


materials for the application of Heat Shrink Sleeves (HSS) for riser field joint.

Year 2008


Project Puteri Field Development Project for Petronas Carigali Sdn. Bhd.

– HDPUF In Fill Coating for the Pipeline Field Joints


materials for the application of HDPUF for pipeline field joint in-fill.

Year 2008


Project West and East Field Pipeline Replacement for Brunei Shell Petroleum

– HDPUF In Fill Coating for the Pipeline Field Joints



Year 2008


Project West Madura and Poleng Fields for Kodeco, Indonesia – HDPUF In Fill

Coating for the Pipeline Field Joints




Year 2008

Client Jindal Saw Ltd-Valentine Maritime Ltd

Project Takula Gas Processing Platform for Chevron

Scope of work Subcontract services for the supply of personnel and materials for the

application of HDPUF for riser field joint in-fill.

Year 2008


Scope of Work Provision of Inspection Personnel for M3S Pipe Project for Sarawak Shell

Berhad.

Year 2008


Project MOC-Golok Substructure

Scope of work Subcontract services for the supply of, equipment, personnel and

materials for the application of HDPUF for riser field joint in-fill and Heat

Shrink Sleeves (HSS) for riser field joints.

Year 2008

Client Swiber Offshore Construction Pte Ltd

Project Hybrid Rentis Pipeline Installation for Murphy Sarawak

24’’x 33KM x 2 lines, 24’’x 2.18KM x 2 lines and 20’’ x 4.2KM

Scope of work Subcontract services for the supply of equipment, personnel and

materials for the application of HDPUF for pipeline field joint in-fill

Year 2008

Client Germanischer Lloyd Industrial Services (GL Vietnam)

Project Ca Ngu Vang WHP Project for Hoan Vu Joint Operating Company

(HVJOC).

Scope of Work Provision of Safety Personnel - QA/QC Services for Pipeline and Offshore

Operation.

Year 2008

Client J. Ray McDermott Far East Inc (JRMFEI)

Scope of Work Provision of Coating Inspector.


Year 2008 (Future-Sept 08)

Client Swiber Offshore Construction Pte Ltd

Project North Belut Pipeline Installation for Conoco Philips

22’’ x 10KM, 16’’x 37KM and 10’’x 37Km

Scope of work Subcontract services for the supply of equipment, personnel and

materials for the application of HDPUF for pipeline field joint in-fill


8. CONTACT DETAILS

OAG Group can be contacted at the following address and contact numbers:

OAG Group of Companies.

Suite 7.15, Level 7,

Wisma Central, Jalan Ampang

50450 Kuala Lumpur

MALAYSIA

Tel. No. : (+603) 2166 1068

Fax.No. : (+603) 2166 2068

E-mail : [email protected]

Website : oag-group.com

Managing Director

Name : Jonathan Chong

Mobile No. : +6 016 336 2833


Business Development Manager

Name : James Ng

Mobile No. : +6 016 697 5616


OAG O&G Corporate Profile

Documents

Transcript of OAG O&G Corporate Profile