O N I C S1 MOULD A S M POLISHING MACHINE · Available in 1, 2 or 3 independent sections Benefits. S...
Transcript of O N I C S1 MOULD A S M POLISHING MACHINE · Available in 1, 2 or 3 independent sections Benefits. S...
S ON I C A M S1 MOULD
POLISHING MACHINE(available in 1, 2 or 3 sections)
Sonicam S1 produces a mirror surface on new and repaired glass blank and blow moulds providing an optimal high-quality surface for efficient container
glass production.
7000 rpm spindle speed ensuring shorter cycles and a higher quality of polishing
Up to 2000 polishing programs can be stored in memoryDifferent speeds can be set depending on the mould profile, shape, sizes, engraving areas
Robust, very long lifetime, user friendly SIEMENS controlsAvailable in 1, 2 or 3 independent sections
Benefits
S ON I C A MSONICAM
19, rue Jules Ferry, Z.I. Le Pontet69360 Saint-Symphorien-d’Ozon, France www.sonicam.com
+33 (0)478 024 950 [email protected]
Technical specifications
Ø magnetic holder
Ø mould profile
Vertical stroke
Vertical speed
Spindle motor
Planetary motor
Control circuit
Voltage
Power
Numerical control
Dimensions (LxWxH) & Weight:
S1A1 – 1 section:
S1A2 – 2 sections:
S1A3 – 3 sections:
Complies with CE standards (UL as option)
250 mm
Min.: 22 mm / Max.: 260 mm
400 mm (540 mm as option)
Max.: 15 mm/sec
0.55 KW / 50 Hz – 7000 RPM (+/- 125 Hz)
0.25 KW / 50 Hz – 0 to 150 RPM
24 V
220 / 240V single phase, 50/60 Hz
Installed: 8 KW / Consumption: max. 1,2 KW
SIEMENS KP700
1040 x 960 x 2300 mm / 685 KG
1700 x 960 x 2300 mm / 1243 KG
2580 x 960 x 2300 mm / 1795 KG
High quality abrasives & spares for S1
Flap wheel tools Emery ringsRubber disks Washer, screws
(All of our abrasives are available in standard but also in special references upon demand)
Round or square mould shapes can be operated Option: extended working tables