NYU Stern School of Business - FOSTER PROVOST – external … · 2018-02-27 · IFORS...

1

CURRICULUM VITAE

Michael L. Pinedo

Personal Data

Birth: Curacao, Netherlands Antilles.

Status: Married, three children.

Education

Ph.D. in Operations Research, University of California, Berkeley, June 1978,

Department of Industrial Engineering and Operations Research.

M.S. in Operations Research, University of California, Berkeley, December 1975,

Department of Industrial Engineering and Operations Research.

Ir. in Mechanical Engineering (Ir. equivalent to M.S.), Delft University of

Technology, the Netherlands, June 1973.

Employment

Julius Schlesinger Professor of Operations Management, Stern School of

Business, New York University, 2002 - present, New York, NY.

Chairperson, Department of Information, Operations and Management Sciences,

Stern School of Business, New York University, 2005 - 2013, New York, NY.

Deputy Chair, Department of Information, Operations and Management Sciences,

Stern School of Business, New York University, 2001 - 2005, New York, NY.

Chairperson, Department of Operations Management, Stern School of Business,

New York University, 2000 - 2001, New York, NY.

2

Research Professor, New York University, Stern School of Business, 1997 -

2002, New York, NY.

Visiting Professor, Hong Kong University of Science and Technology, De-

partment of Industrial Engineering, June-July, 1997, Hong Kong.

Professor, Columbia University, Department of Industrial Engineering and

Operations Research, 1988 - 1997, New York, NY.

Visiting Scientist, Philips Laboratories, Manufacturing Systems Research

Laboratory, 1989-1990, Briarcliff Manor, NY.

Associate Professor, Columbia University, Department of Industrial Engi-

neering and Operations Research, 1984 - 1988, New York, NY.

Director, Prudential Insurance Company of America, Real Estate Invest-

ment Department, Newark Corporate Office, 1985 - 1986, Newark, NJ.

Assistant Professor, Columbia University, Department of Industrial Engi-

neering and Operations Research, 1982 - 1984, New York, NY.

Assistant Professor, Georgia Insitute of Technology, Department of Indus-

trial and Systems Engineering, 1980 - 1982, Atlanta, GA.

Investigador I-2, Instituto Venezolano de Investigaciones Cientifcas (IVIC),

Laboratorio de Sistemas, 1978 - 1980, Caracas, Venezuela.

Visiting Professor, Instituto de Estudios Superiores de Administracion (IESA),

1978 - 1980, Caracas, Venezuela.

Design Specialist, Hitachi Zosen, Engine Design Division, Innoshima Shipyard,

August 1973 - November 1973, Innoshima, Japan.

Memberships of Boards and Professional Societies

Member Supervisory Board of Erasmus Research Institute of Management

(ERIM), Rotterdam School of Management, 2013-2016.

Member Advisory Board (Kuratorium), Frankfurt School of Finance and

Management, 2014 - present

3

Operations Research Society of America (ORSA), 1980 - 1987, 1992 - present

Production and Operations Management Society (POMS), 2000 - present

American Risk and Insurance Association (ARIA), 1979 - 1983

American Institute of Industrial Engineers (IIE), 1982 - 1988.

Professional Activities

Member, Nicholson Prize Committee, INFORMS, 2005.

Member, Nicholson Prize Committee, INFORMS, 2004.

Member, Dantzig Prize Committee, INFORMS, 1998.

Member, Dantzig Prize Committee, INFORMS, 1997.

Member, Nicholson Prize Committee, ORSA, 1985.

Member, Lanchester Prize Committee, ORSA, 1983.

Council Member, Applied Probability Technical Section, ORSA, 1983.

Awards

IFORS Distinguished Lecturer (Rhodes, Greece, 2004)

Fellow INFORMS (inducted 2009).

Fellow POMS (inducted 2010).

ChangJiang Scholar (Ministry of Education of China, 2012)

Patent

US Patent 7590594, M. Gunewardena, W.R. Egan, and M. Pinedo (2009),

”Method, Software Program and System for Ranking Relative Risks of a

Plurality of Transactions”, Goldman Sachs.

Consulting Activities

Goldman, Sachs, & Co. Inc., Operational Risk Analysis, 2000 - 2005.

Alcan, Planning and Scheduling Projects, 2003 - 2005.

Bender Management Consultants, System Design and Development Projects,

1995 - 1998.

International Paper, Productivity Improvement Projects in Various Con-

verting Facilities and Primary Mills, l986 - 1995.

4

Xerox, Productivity Improvement Projects in Assembly Facilities and Printed

Circuit Board Manufacturing Facilities, 1985 - 1992.

Himont, Evaluation of Scheduling Systems Development, 1991.

Siemens, Evaluation of Scheduling Systems Development for Semiconductor

Manufacturing, 1991.

Merck & Co., Evaluation of Scheduling Systems Development, 1990.

Sperry Corp., Warehouse Layout and Design Project, 1983.

Editorial Activities

Member of Editorial Board, Annals of Operations Research, 2015-present

Senior Editor, MSOM, 2003 - 2014.

Department Editor, POM, 2005 - present.

Associate Editor, Journal of Operational Risk, 2006 - present.

Associate Editor, Management Science, 2003 - 2014.

Associate Editor, Naval Research Logistics, 2003 - present.

Editor, Journal of Scheduling, 1997 - present.

Area Editor, POM, 1998 - 2005.

Member of Editorial Board, MSOM, 1996 - 2001.

Editor at Large, Interfaces, 1996 - 2004.

Associate Editor, Naval Research Logistics, 1983 - 2000.

Associate Editor, Telecommunications Systems, 1994 - 1998.

Area Editor, Operations Research (Stochastic Processes), 1992 - 1995.

Department Editor, IIE Scheduling and Logistics, 1993 - 1997.

Associate Editor, Institute of Industrial Engineers, 1989 - 1992.

Associate Editor, Operations Research, 1983 - 1992.

Research Grants

United States-Israel Binational Science Foundation: Grant 2016049 “Parameterized

Analysis of Scheduling Problems” (with D. Shabtay (Ben-Gurion University) and D.

Hermelin (Ben-Gurion University)) $ 130,000; September 1, 2017 – August 2021.

5

National Science Foundation Grant CMMI-0969755 ”Collaborative Proposal:

Container Scheduling - Complexity, Algorithms and Heuristics”, (with Co-

PI Joseph Leung (New Jersey Institute of Technology)) $ 349,000; June 1,

2010 - May 31, 2013.

National Science Foundation Grant DMI-0555999 ”Collaborative Proposal: A

Framework for Integrating Production Scheduling with Inventory Control”,

(with Jiawei Zhang (NYU) and Co-PI Joseph Leung (New Jersey Institute of

Technology)) $ 240,000; June 1, 2006 - May 31, 2009.

National Science Foundation Grant DMI-02456 ”Collaborative Research:

Scheduling Multiple Product Types on Parallel Resources”, (with Co-PI Joseph

Leung (New Jersey Institute of Technology)) $ 300,000; June 1, 2003 - May 31,

2006.

National Science Foundation Grant DMI-0200406, ”Collaborative Research:

Resource and Demand Allocation in Dynamic Environments”, (with Co-PIs

Xiuli Chao (North Carolina State University) and Sridhar Seshadri (New York

University)) $ 305,000; August 15, 2002 - July 31, 2005.

National Science Foundation Grant DMII-95-22938, “Generalized Job Shop

Models with Multiple Objectives”, $210,000; January 1, 1996 - December 31,

1998.

U.S. Air Force Rome Laboratory Grant No. F30602-95-1-0032, “Interactive

Optimization in Object Oriented Scheduling Systems”, (with Co-PI Xiuli Chao

(NJIT) $ 253,984; August 1, 1995 - July 30, 1998.

National Science Foundation Grant DDM-92-25062, “Scheduling with Multiple

Objectives and Machine Availability Constraints”, $195,000; July 1993 - July

1996.

National Science Foundation Grant ECS, “Structural Properties and Algorithms

for Flow Line Scheduling”, $ 120,000; June 1991 - June 1994.

National Science Foundation Grant ECS, “Sequencing of Flexible Assembly

Systems with Blocking”, $270,000; (with S.T. McCormick), June 1987 - June

1991.

6

National Science Foundation Grant CDR-85-11111 Engineering Research Center

(Center for Telecommunications Research, (CTR)), (with 18 other Principal

Investigators), 1985 - 1995.

National Science Foundation Grant ECS- 83-12237, “Stochastic Scheduling:

Precedence Constraints and Variability”, $ 60,000; June 1984 - December 1986.

National Science Foundation Grant ECS-81-15344, “Stochastic Scheduling”,

$ 44,000; January 1982 - June 1984.

Support from Industry for Doctoral Research

$ 15,000 (2006) International Business Machines.

$ 12,000 (1995) International Paper Foundation.

$ 30,000 (1994) Paragon Management Systems.



$ 18,000 (1992) Siemens Corporate Research, Inc.

$ 10,000 (1992) Philips Laboratories.




$ 55,000 (1990) Siemens Corporate Research, Inc.


$ 20,000 (1989) Philips Laboratories.

$ 19,000 (1988) Xerox Foundation.




Ph.D Students

Sung-Hwan Wie, 1984, Korea Institute of Defense Analyses.

Elias Rammouz, 1986, American University, Beirout, Lebanon.

Cheng-Sheng Chang, 1989, National Tsing-Hua University, Taiwan.

Xiuli Chao, 1989, University of Michigan, Ann Arbor.

Brian Eck, 1990, Google.

Young-Hoon Lee, 1992, Yonsei University, Korea.

Dequan Shaw, 1993, GTE Laboratories, Waltham, MA.

Ping-Chang (Benjamin) Yen, 1995, Hong Kong University.

7

Marcos Singer, 1996, Pontificia Universidad Catolica, Chile.

Qing Du, 1997, Financial software development firm.

Ya Yang, 1998, Duke University.

Andrew Feldman, 1999, Bloomberg.

Haibing Li, 2005, (PhD. at NJIT) Barclays.

Vladimir Krasik, 2007, Barclays.

Christos Zacharias, 2014, University of Miami.

Yuqian Xu, 2017, University of Illinois-Urbana-Champaign.

Columbia University Industrial Engineering and Operations

Research Symposia

Organizer of 1st IEOR Symposium, 1983, “Routing and Scheduling”

Organizer of 2nd IEOR Symposium, 1984, “Reliability and Quality Control”

Organizer of 4th IEOR Symposium, 1986, “Operations Research in Manu-

facturing”

Organizer of 5th IEOR Symposium, 1987, “Production Planning and Schedul-

ing”

Organizer of 6th IEOR Symposium, 1988, “Operations Research in Telecom-

munications”

Organizer of 7th IEOR Symposium, 1989, “Operations Research and Pro-

ductivity in Manufacturing”

Organizer of 8th IEOR Symposium, 1990, “Operations Research in Telecom-

munications”

Organizer of 9th IEOR Symposium, 1991, “Applied Scheduling: Integration

of Disciplines”.

Co-organizer of ”Global Best Practices in Supply Chain Management: The

Case for the Retail Industries”, 1996.

8

Stern School of Business - O.M. Symposia

Co-organizer of 2nd Stern O.M. Symposium, 1998, “Operations and Produc-

tivity in Financial Services”

Co-organizer of 3rd Stern OM Symposium, 1999, “Distribution Channels in

Insurance and Financial Services”

Organizer of Stern CIIO-OM Symposium, 2000, ”Direct to Customer: New

Distribution Models”

Software Development

“Liquid Packaging Scheduling System (LPSS)”, (with L. Adler, N. Fraiman

and T-P. Wu). Development Period: 1985-1987. Approximately 25,000 lines

Turbo-Pascal. Platform: IBM-compatible PC. User’s Manual 60 pages. Currently

in Operation in Three Factories.

“Bagpak Production Scheduling System (BPSS)”, (with L. Adler, N. Fraiman,

R. Kern, T-P. Wu). Development Period 1986-1989. Approximately 30,000 Lines

Turbo-Pascal. Platform: IBM-compatible PC. User’s Manual 55 pages. Currently

in Operation in Two Factories.

“PREP: A Scheduling Preprocessor”, (with K. Bhaskaran and P. Caiazzi),

Development Period: 1989 - 1990. Approximately 5000 Lines C. Platform: SUN

workstation, UNIX, Sunview.

“Columbia University Production and Inventory Decision-making (CU-

PID)”, (with R. Samroengraja). Development Period: 1988-present. Cur-

rently 12,000 Lines Turbo-Pascal. Platform: IBM-compatible PC.

“Columbia University Interactive Scheduling Editor (CUISE 2.0)” (with R.

Samroengraja and P.C. Yen). Development Period: 1989-present. Currently 40,000

lines C and C++. Platform: SUN Sparc-station, Unix, Motif.

”LEKIN” (with X. Chao and A. Feldman). Development Period: 1997-

2000. Educational software system for use in senior level and graduate courses

in production planning and scheduling. The system is currently being used at

approximately 60 universities worldwide.

9

Software Licensing Agreement

Columbia University granted Paragon Management Systems in 1995 a non-

exclusive software license agreement for the CUISE 2.0 software package.

License fee is $ 20,000 up front and between $ 4,000 and $ 7,000 for each copy

installed.

Paragon Management Systems made CUISE 2.0 operational in facilities of

Guilford Fabrics (North Carolina) in 1995.

Books

“Scheduling: Theory, Algorithms and Systems”, 1995, 378 pages, Prentice-

Hall, NJ.

”Scheduling: Theory, Algorithms and Systems (2nd Edition, Extended and

Revised)”, 2002, 586 pages, Prentice-Hall, NJ.

”Scheduling: Theory, Algorithms and Systems (3rd Edition, Extended and

Revised)”, 2008, 671 pages, Springer.

”Scheduling: Theory, Algorithms and Systems (4th Edition, Extended and

Revised)”, 2012, 686 pages, Springer.

”Scheduling: Theory, Algorithms and Systems (5th Edition, Revised)”, 2016,

670 pages, Springer.

“Operations Scheduling with Applications in Manufacturing and Services”

(with X. Chao), 1998, 312 pages, McGraw-Hill/Irwin.

”Planning and Scheduling in Manufacturing and Services”, 2005, 504 pages,

Springer.

”Planning and Scheduling in Manufacturing and Services (2nd Edition,

Extended and Revised)”, 2009, 536 pages, Springer.

“Queueing Networks: Customers, Signals and Product Form Solutions” (with

X. Chao and M. Miyazawa), 1999, 443 pages, J. Wiley, UK.

10

”Creating Value in Financial Services: Strategies, Operations and Tech-

nologies” (Co-editor with E. Melnick, P. Nayyar, and S. Seshadri), January

2000, Kluwer Academic Press.

”Operational Control in Asset Management: Processes and Costs”, (Ed-

itor), January 2010, 219 pages, Palgrave McMillan.

”Global Asset Management - Strategies, Risks, Processes, and Technolo-

gies”, (Co-editor with I. Walter), September 2013, Palgrave McMillan.

”Operations in Financial Services - Processes, Technologies, and Risks”, (with

Y. Xu), Foundations and Trends in Technology, Information and Operations

Management, Vol. 11: No. 3, pp 223-342, December 2017, NOW Publishers, Inc.,

Boston.

Chapters in Handbooks and Reference Books

“Scheduling”, Chapter 80 in Handbook in Industrial Engineering, G.

Salvendy, editor, 1992, John Wiley, NY.

“Dispatching” (with K. Bhaskaran), Chapter 83 in Handbook in Industrial

Engineering, G. Salvendy, editor, 1992, John Wiley, NY.

“Scheduling in Flexible Assembly Systems”, Chapter 18 in Reference Book

on Intelligent Design and Manufacturing, A. Kusiak editor, 1992, John Wiley, NY.

“Design Issues with regard to Scheduling Systems in Manufacturing” (with

R. Samroengraja and B. Yen), Chapter 6 in Computer-Aided Manufacturing /

Computer-Integrated Manufacturing, Vol. 60 in Control and Dynamic Systems

series, C. Leondes editor, 1994, Academic Press, San Diego.

”The Chao/Pinedo Model”, (with Xiuli Chao), Section 3.3 in Computer

Networks and Systems: Queueing Theory and Performance Evaluation (2nd

edition), T. Robertazzi author, 1994, Springer Verlag, NY.

”Heuristic Methods: Applications to Facility Layout, Routing and Schedul-

ing”, (with D. Simchi-Levi), Chapter 9 in Mathematical Programming for

Industrial Engineers, M. Avriel and B. Golany (Eds.), 1996, Marcel Dekker

Inc., New York, NY.

11

“Current Trends in Deterministic Scheduling”, (with C.-Y. Lee and L. Lei),

Chapter 1 in volume of Annals of Operations Research on Deterministic

Scheduling, C.Y. Lee and L. Lei (Eds.), 1997, Baltzer, Basel.

”Capacity”, (with S. Seshadri), in The Technology Management Hand-

book, R.C. Dorf (Ed.), (1998), CRC Press LLC, Boca Raton.

”Creating Value in Financial Services” (with E. Melnick, P. Nayyar, and

R. Seshadri), Chapter 1 in Creating Value in Financial Services: Strategies,

Operations and Technologies, E. Melnick, P. Nayyar, M. Pinedo and S. Seshadri

(Eds.), 2000, Kluwer Academic Press.

”Design and Analysis of Call Centers in Financial Services” (with S. Se-

shadri and G. Shanthikumar), Chapter 18 in Creating Value in Financial

Services: Strategies, Operations and Technologies, E. Melnick, P. Nayyar,

M. Pinedo and S. Seshadri (Eds.), 2000, Kluwer Academic Press.

”Dispatching and Scheduling”, (with S. Seshadri), in Handbook of Industrial

Engineering, 3rd Edition, G. Salvendy, (Ed.) 2002, John Wiley, NY.

”Operational Due Diligence in Cross-Border Mergers and Acquisitions”, (with

L. Arrington, N. Fraiman, and C. Paris), Chapter in Due Diligence in Cross-Border

Mergers and Acquisitions, A. Rosenbloom (Ed.), 2002, Bloomberg Press.

”Scheduling”, (with S. Seshadri), Entry in the McGraw-Hill Encyclopaedia

of Science and Technology, 2002, McGraw-Hill.

”Scheduling: Optimization and Heuristics” (with C.Y. Lee), in Handbook of

Applied Optimization, P. Pardalos and M. Resende (Eds.), 2002, Oxford

University Press, New York.

”On-Line Deterministic Scheduling, Stochastic Scheduling, Off-Line De-

terministic Scheduling: A Comparative Overview” Chapter 38 in Handbook of

Scheduling, J. Leung (Ed.), 2004.

”Order Scheduling Models: An Overview” (with J. Leung and H. Li), in

Multidisciplinary Scheduling: Theory and Applications, Kendall, Burke, Petrovic

and Gendreau (Eds.), pp. 37 -53, Springer, 2005.

12

”Coordination Issues in Supply Chain Planning and Scheduling” (with

S. Kreipl and J. Dickersbach), Chapter 8 in Handbook of Production Schedul-

ing, J. Herrmann (Ed.), Springer, 2006.

”Total Quality Management and Operational Risk in the Service Indus-

tries” (with M. Cruz), Chapter 7 in TutORials in Operations Research, Z.-L.

Chen and S. Raghavan (Eds.), INFORMS publication, 2008.

”The Interrelationships between Processes, Costs, and Risks in Asset

Management”, Chapter 18 in Global Asset Management, M.L. Pinedo and

I. Walter (Eds.), Palgrave McMillan, 2013.

“Scheduling in Manufacturing and Services” (with K. Lee), Chapter 5 in the

Routledge Companion to Production and Operations Management, M.K. Starr and S.K.

Gupta (Eds.), Routledge-Taylor and Francis, 2017.

Chapters in Refereed Conference Proceedings

“Stochastic Shop Scheduling: A Survey” (with L. Schrage), in Deterministic

and Stochastic Scheduling, M.A.H. Dempster et al. (Eds.), D. Reidel Publishing

Co., Dordrecht, (1982), pp. 181-196.

“On the Computational Complexity of Stochastic Scheduling Problems”,

in Deterministic and Stochastic Scheduling, M.A.H. Dempster et al. (Eds.), D.

Reidel Publishing Co., Dordrecht, (1982), pp. 355-365.

“On the Optimal Order of Stations in Tandem Queues”, in Applied Probability

Computer Science: the Interface, R. Disney and T. Ott (Eds.), Birkhauser,

Boston, (1982), pp. 307-325.

“On Optimal Policies in Stochastic Shop Scheduling”, in Annals of Op-

erations Research, Volume 1, P. Hammer (Ed.), (1984), pp. 305-329.

“Analysis of an Assembly Line with Limited Buffers”, (with S.T. McCormick and

B. Wolf), in Proceedings of the Second Conference on Flexible Manufacturing

Systems: Operations Research Models and Applications, K. Stecke and R. Suri

(Eds.), Elsevier Science Publishers, Amsterdam, (1986), pp. 499-509.

“An Expert System for Scheduling in a Liquid Packaging Plant”, (with L. Adler

and N. Fraiman), in Proceedings of the Third International Conference on Expert

Systems and the Leading Edge in Production and Operations Management, K.R.

Karwan and J.R. Sweigert, (Eds.), (1989), pp. 505-519.

13

“A Note on Queues with Bernoulli Routing”, (with C-S. Chang and X. Chao), in

Proceedings of the 29-th IEEE Conference on Decision and Control, (1990).

“Stochastic Convexity for Multi-Dimensional Processes”, (with C-S. Chang

and X. Chao), in Proceedings of the 29-th IEEE Conference on Decision and

Control, (1990).

“Dispatching Issues in Job Shop Scheduling” (with K. Hadavi, W-L. Hsu,

D. Levy) in Proceedings of the Joint US/German Conference on New Direc-

tions for Operations Research in Manufacturing, Springer Verlag, (1992).

“Scheduling: Theory, Algorithms and Systems Development” (with K.

Hadavi) in Proceedings of the 20th Annual Meeting of the Deutsche Gesellschaft fur

Operations Research, Springer Verlag, (1992), pp. 35-43.

“On the Design and Development of Scheduling Systems” (with B. P.-C. Yen)

in Proceedings of the Fourth International Conference on Computer Integrated

Manufacturing and Automation Technology, IEEE Computer Society Press, (1995),

pp. 197-205.

”Monotonicity of Loss Probabilities in Acyclic Queueing Networks” (with

S. Seshadri) in Proceedings of the 6th International Conference on Telecom-

munication Systems, (1998), pp. 208-215.

”Heuristics for Planning and Scheduling in Practice”, in Proceedings of the

2002 GECCO Conference, New York, (2002).

”Ordering Scheduling Models with Applications in Practice”, in Proceed-

ings of the First MultiDisciplinary International Conference on Scheduling:

Theory and Applications (MISTA I), Nottingham, (2003), pp. 2-10.

”Inventory Control and Scheduling with Facilities in Parallel” (with V. Krasik,

J. Leung and J. Zhang), in Proceedings of the Second Multidisciplinary

Conference on Scheduling: Theory and Applications (MISTA II), pp. 740-743,

New York, July 2005.

14

”Scheduling Orders in Dedicated and Flexible Machine Environments” (with

J. Leung and H. Li), in Proceedings of the Second Multidisciplinary Conference

on Scheduling: Theory and Applications (MISTA II), pp. 471- 484, New York,

July 2005.

”Competitive Agent Scheduling with Controllable Processing Times”, (with

J. Leung and G. Wan), in Proceedings of the Third Multidisciplinary Conference on

Scheduling: Theory and Applications (MISTA III), pp. 514- 522, Paris, August

2007.

Publications in Refereed Journals

“Scheduling Stochastic Tasks on Two Parallel Processors” (with G. Weiss),

Naval Research Logistics Quarterly, (1979), Vol. 26, No. 3, pp. 527-536.

“Scheduling Tasks with Exponential Service Times on Parallel Processors”

(with G. Weiss), Journal of Applied Probability 1980, Vol. 17, No. 1, pp. 187-202.

“Scheduling Spares in a Two Component Parallel System”, Journal of

Applied Probability (1980), Vol 17, No. 3, pp. 1052-1032.

“Scheduling Jobs under Nonhomogeneous Poisson Shocks” (with S. Ross),

Management Science (1980), Vol. 26, No. 12, pp. 1250-1258.

“Stochastic Models for Seismic Risk Evaluation” (with D. Shpilberg),

Journal of Risk and Insurance, Vol. 48, No. 1, pp. 46 - 58.

“Minimizing Makespan with Bi-modal Processing Time Distributions”,

Management Science, (1981), Vol. 27, No. 5, pp. 582 -587.

“A Note on the Two Machine Job Shop with Exponential Processing Times”,

Naval Research Logistics Quarterly (1981), Vol. 28, No. 4, pp. 693-696.

“A Comparison between Independent and Dependent Service Times in

Tandem Queues” (with R. Wolff), Operations Research, (1982), Vol. 30, No. 2,

pp. 464-479.

15

“Minimizing the Makespan in a Stochastic Flow Shops”, Operations

Research, (1982), Vol. 30, No. 1, pp. 148-162.

“Minimizing the Makespan in Stochastic Open Shops” (with S. Ross),

Advances in Applied Probability, (1982), Vol. 14, No. 4, pp. 898-911.

“Stochastic Scheduling with Release dates and Due Dates” Operations

Research, (1983), Vol. 31, No. 3, pp. 559-572.

“Scheduling Jobs with Exponentially Distributed processing Times on Two

Machines with resource Constraints”, (with G. Weiss), Management

Science, (1984), pp. 883-889.

“On Flow Time and Due Dates in Stochastic Scheduling”, European

Journal of Operational Research, (1984), pp. 81-85.

“Inequalities and Bounds for Stochastic Shops”, (with R. Weber), SIAM

Journal of Applied Mathematics, (1984), Vol. 44, No. 4, pp. 869-879.

“ Scheduling Jobs with Exponentially distributed Processing Times sub-

ject to Precedence Constraints on Two Parallel machines“, (with G. Weiss),

Operations research, (1985), pp. 1381-1389.

“A Note on Stochastic Shop Models in which Jobs have the same Processing

Requirements on each Machine”, Management Science, (1985), pp. 840-847.

“Inequalities and Bounds for the Scheduling of Stochastic Jobs on Parallel

Machines”, (with Z. Schechner), Journal of Applied Probability, (1985), pp. 739-

744.

“On Minimizing the Expected Makespan and Flow Time in m Machine

Flow Shops with Blocking”, (with S.H. Wie), Mathematics of Operations

Research, (1986), pp. 336-343.

“Inequalities for Stochastic Flow Shops and Job Shops”, (with S.H. Wie),

Stochastic Processes and Data Analysis, (1986), pp. 61-71.

16

“The Effects of the Variance on Nonpreemptive Scheduling on Parallel

Machines”, (with G. Weiss), Operations Research, (1987), pp. 884-891.

“Single Machine Scheduling with Breakdown and Repair”, (with E. Ram-

mouz), Probability in the Engineering and Informational Sciences, (1988), pp. 41-

49.

“On the Interchangeability of Tandem Queues with Blocking”, (with

X. Chao and K. Sigman), Probability in the Engineering and Informational

Sciences, (1989), Vol. 3, pp. 223-236.

“Sequencing in an Assembly Line with Blocking to Minimize Cycle Time”,

(with S.T. McCormick, B. Wolf and S. Shenker), Operations Research, (1989), Vol.

37, No. 6, pp. 425 - 436.

“Bounds and Inequalities for Single Server Loss Systems”, (with C-S. Chang),

Queueing Systems: Theory and Applications, (1990), pp.

“Integration of Discrete Time Correlated Markov Processes in a TDM

System: Structural Results”, (with C-S. Chang and X. Chao), Probability in

the Engineering and Informational Sciences, (1990), Vol. 4, pp. 29-56.

“On Two Servers in Tandem with no Intermediate Buffer and Poisson

Batch Arrivals”, (with X. Chao), Stochastic Models, (1990), Vol. 6, pp. 735-

749.

“Scheduling Stochastic Jobs with Due Dates on Parallel Machines”, (with H.

Emmons), European Journal of Operational Research, (1990), pp. 49-55.

“On the Transient Behaviour of an Assembly Line with Blocking”, (with

S.T. McCormick, B. Wolf and S. Shenker), International Journal of Flexible

Manufacturing Systems, (1990), Vol. 3, pp. 27-44.

“Monotonicity Results for Queues with Doubly Stochastic Poisson Arrivals:

Ross’s Conjecture”, (with C-S. Chang and X. Chao), Advances in Applied

Probability, (1991). pp. 210-228.

17

“Stochastic Convexity for Multi-Dimensional Processes and its Applications” (with

C-S. Chang and X. Chao), IEEE Transactions on Automatic Control, Special Issue on

Multi-Dimensional Queueing Systems, (1991), pp. 1347-1356.

“Scheduling Two Classes of Exponential Jobs on Parallel Processors:

Structural Results and Worst Case Analysis”, (with C-S. Chang and R. Nelson),

Advances in Applied Probability, (1992) pp. 925-944.

“On the Optimality of the LEPT rule and the cµ Rule for Machines in

Parallel” (with C-S. Chang, X. Chao and R. Weber), Journal of Applied

Probability, (1992), pp. 667-681.

“On Optimal Permutation Scheduling in Stochastic Proportionate Flow

Shops” (with D. Shaw and X. Chao), Probability in the Engineering and

Informational Sciences, (1992), pp. 513-523.

“On Reversibility of Tandem Queues with Blocking” (with X. Chao),

Naval Research Logistics, (1992), pp. 957-974.

“BPSS: A Scheduling System for the Packaging Industry” (with L. Adler,

N. Fraiman, R. Kern, E. Kobacker, J.C. Plotnicoff, T-P. Wu), Operations

Research, (1993), pp. 641-648.

“On Generalized Queueing Networks with Positive and Negative Arrivals”

(with X. Chao), Probability in the Engineering and Informational

Sciences, (1993), pp. 301-334.

”Integration of Disciplines for Applied Scheduling” (with W-L. Hsu, K.

McKay and P.-S. Ow), Production Planning and Control, (1993), pp. 416- 421.

“Minimizing the Makespan subject to Flow Time Optimality on Parallel

Machines” (with B. Eck), Operations Research, (1993), pp. 797-800.

“Guidelines for Reporting Computational Results in IIE Transactions”,

(with C.-Y. Lee, J. Bard, W. Wilhelm), IIE Transactions: IIE Research, 1993,

pp. 121-123.

18

“Scheduling n Independent Jobs on m Uniform Machines with both Flow

Time and Makespan Objectives: A Parametric Analysis” (with S. T. Cormick),

ORSA Journal of Computing, (1995), pp. 63-77.

”A Convexity Property of a Markov Modulated Queueing Loss System” (with

C. Du), Probability in the Engineering and Informational Sciences, (1995), pp.

193-199.

”On Networks of Queues with Signals and History Dependent Routing” (with

X. Chao), Probability in the Engineering and Informational Sciences, (1995), pp.

341-354.

“A Note on Minimizing the Expected Makespan in Flow Shops subject

to Breakdowns” (with C. Du), Naval Research Logistics, (1995), pp. 1251- 1262.

“A Queueing Network with Batch Services and Signals” (with X. Chao).

Operations Research Letters, (1995), pp. 237-242.

“A Queueing Network with Batch Services and Product Form Solution”

(with X. Chao and D. Shaw). Journal of Applied Probability, (1996), 858- 869.

“A Heuristic to Minimize Total Weighted Tardiness with Sequence De-

pendent Setups” (with K. Bhaskaran and Y-H. Lee). IIE Scheduling and

Logistics, (1997), 45-72.

“A Priority Index Rule for the Minimization of the Sum of the Weighted

Tardinesses on Parallel Machines” (with Y-H. Lee). European Journal of

Operational Research, (1997), Vol. 100, pp. 464-474.

”On the Design and Development of Object-Oriented Scheduling Systems”

(with B. P.-C. Yen). Annals of Operations Research, (1997), Vol. 70, pp. 359-378.

”Commentary on an Exposition of Multiple Constraint Scheduling as Im-

plemented in the Goal System”, Production and Operations Management,

(1997) Vol. 6, pp. 25-28.

19

“A Computational Study of Branch and Bound Techniques for Minimizing the

Total Weighted Tardiness in Job Shops” (with M. Singer) IIE Scheduling and

Logistics, (1998) Vol. 30, pp. 109-118.

”Bounds on the Mean Delay in Multiclass Queueing Networks under Shortfall

Based Priority Rules”, (with S. Seshadri) Probability in the Engineering and

Informational Sciences, (1998), Vol. 12, pp. 329-350.

“Scheduling in a Proportionate Flow Shop” (with N. Shakhlevich and

H. Hoogeveen), Journal of Scheduling (1998), Vol. 1, pp. 157-168.

”Optimal Allocation of Resources in a Job Shop Environment”, (with S.

Seshadri), IIE Transactions in on Operations Engineering (1999), Vol. 31, pp.

1-12.

“A Shifting Bottleneck Heuristic for Minimizing the Total Weighted Tar-

diness in Job Shops” (with M. Singer) Naval Research Logistics, (1999) Vol. 46,

pp. 1-18.

“Heuristics for Minimizing the Total Weighted Tardiness in Flexible Flow

Shops” (with S. Kreipl and Y. Yang) Journal of Scheduling, (2000) Vol. 3, pp. 89-

108.

”A Practice-Focused Agenda for Production Scheduling Research”, (with

K. Mckay and S. Webster) Production and Operations Management, (2002),

Vol. 11, pp. 249-258.

”Minimizing Total Completion Time on Parallel Machines with Dead-

line Constraints”, (with J. Leung), SIAM Journal of Computing, (2003), Vol.

32, pp. 1370-1388.

”Scheduling Jobs on Parallel Machines that are Subject to Breakdowns”, (with

J. Leung), Naval Research Logistics, (2004), Vol. 51, pp. 60-71.

”An Overview of Planning and Scheduling Issues in Supply Chains” (with

S. Kreipl), Production and Operations Management, (2004), Vol. 13, pp. 77-

92.

20

”Open Shops with Jobs Overlap - Revisited”, (with J. Leung, H. Li, and C.

Sriskandarajah), European Journal of Operational Research, (2005), Vol.

163, pp. 569-571.

”Order Scheduling in an Environment with Dedicated Resources in Par-

allel”, (with J. Leung and H. Li), Journal of Scheduling, (2005) Vol. 8, pp.

355-386.

”Scheduling Orders for Multiple Product Types with Due Date Related

Objectives” (with J. Leung and H. Li), European Journal of Operational

Research, (2006) Vol. 168, pp. 370-389.

”Minimizing Total Completion Time on Uniform Machines with Dead-

line Constraints”, (with T. Gonzalez and J. Leung), ACM Transactions on

Algorithms (2006), Vol. 2, pp. 95-115.

”Approximation Algorithms for Minimizing Total Weighted Completion

Time of Orders on Identical Machines in Parallel”, (with J. Leung and H.

Li), Naval Research Logistics (2006), Vol. 53, pp. 243-260.

”Minimizing Total Weighted Completion Time when Scheduling Orders

in a Flexible Environment with Uniform Machines” (with J. Leung, H. Li,

and J. Zhang), Information Processing Letters (2007), Vol. 103, pp. 119- 129.

”Scheduling Orders for Multiple Product Types to Minimize Total Weighted

Completion Time”, (with J. Leung and H. Li), Discrete Applied Mathematics,

(2007), Vol. 155, pp. 945-970.

”Stochastic Batch Scheduling and the Smallest Variance First Rule”.

Probability in the Engineering and Informational Sciences, (2007), Vol. 21, pp.

579-595.

”Scheduling Imprecise Computation Tasks on Uniform Processors” (with J.

Leung and G. Wan), Information Processing Letters, (2007), Vol. 104, pp. 45-52.

”Scheduling Orders on either Dedicated or Flexible Machines in Parallel in

Order to Minimize Total Weighted Completion Time”, (with J. Leung and H. Li),

Annals of Operations Research, (2008), Vol. 159, pp. 107-123.

21

”Scheduling Multiple Products on Parallel Machines with Setup Costs”, (with

V. Krasik, J. Leung, and J. Zhang), Naval Research Logistics, (2008), Vol. 55, pp.

654-669.

”Operations in the Service Industries: Introduction to the Special Issue”,

(with U. Apte and C. Maglaras), Production and Operations Management,

(2008), Vol. 17, pp. 235-237.

”Robotic Cells with Parallel Machines and Multiple Dual Gripper Robots:

A Comparative Overview”, (with N. Geismar and C. Sriskandarajah), IIE

Transactions, (2008), Vol. 40, pp. 1211-1227.

”Optimal Capacity in a Coordinated Supply Chain” (with X. Chao and

S. Seshadri), Naval Research Logistics, (2008), Vol. 55, pp. 130-141.

”Multiple Part-Type Production in Robotic Cells: The Equivalence of Two

Real-World Models”, (with M. Dawande and C. Sriskandarajah), Manu-

facturing and Services Operations Management, (2009), Vol. 11, pp. 210-228.

”A Note on ”An Approximation Algorithm for the Load-Balanced Semi-

Matching Problem in Weighted Bipartite Graphs”,”, (with K. Lee and J. Leung),

in Information Processing Letters, (2009), Vol. 109, pp. 608-610.

”Approximation Algorithms for Multi-Agent Scheduling to Minimize Total

Weighted Completion Time,” (with K. Lee, B.-C. Choi, and J. Leung), in

Information Processing Letters, (2009), Vol. 109, pp. 913-917.

”Online Scheduling on Two Uniform Machines subject to Eligibility Con-

straints”, (with K. Lee and J. Leung), in Theoretical Computer Science, (2009),

Vol. 410, pp. 3975-3981.

”A Note on Graph Balancing Problems with Restrictions”, (with K. Lee

and J. Leung), Information Processing Letters, (2009), Vol. 110, pp. 24-29.

”Competitive Agent Scheduling and its Applications” (with J. Leung and G.

Wan), Operations Research, (2010), Vol. 58, pp. 458-469.

22

”Throughput Optimization in Dual-Gripper Interval Robotic Cells”, (with

M. Dawande, N. Geismar, C. Sriskandarajah), IIE Transactions, (2010), Vol.

42, pp. 1-15.

”Robotic Cells with Stochastic Processing Times”, (with N. Geismar),

IIE Transactions, (2010), Vol. 42, pp. 897-914.

”Optimal Control of a Mean Reverting Inventory”, (with A. Cadenillas

and P. Lakner), Operations Research, (2010), Vol. 58, pp. 1697-1710.

”A Decomposition Scheme for Single Stage Scheduling Problems”, (with

S. Bock), Journal of Scheduling, (2010), Vol. 13, pp. 203-212

”Complexity of a Scheduling Problem with Controllable Processing Times”,

(with B.-C. Choi and J. Leung), Operations Research Letters, (2010), Vol.

38, pp. 123-126.

”Scheduling Two Agents with Controllable Processing Times”, (with G.

Wan, S.R. Vakati, and J. Leung), European Journal of Operational Research,

(2010), Vol. 205, pp. 528-539.

”Flow Shops with Machine Maintenance: Ordered and Proportionate

Cases”, (with B.-C. Choi, K. Lee and J. Leung), European Journal of Opera-

tional Research, (2010), Vol. 207, pp. 97-104.

”Complexity of Single Machine Scheduling subject to Inventory Con-

straints”, (with D. Briskorn, B.-C Choi, K. Lee and J. Leung), European

Journal of Operational Research, (2010), Vol. 207, pp. 605-619.

”Makespan Minimization in Online Scheduling with Machine Eligiblity”,

(with K. Lee and J. Leung), 4OR, (2010), Vol. 8, pp. 331-364.

”A Note on Makespan Minimization in Proportionate Flow Shops”, (with B.-

C. Choi and J. Leung) Information Processing Letters, (2010), Vol. 111, pp.77-81.

”Operations in Financial Services - An Overview”, Production and Opera-

tions Management, (with E.D. Hatzakis and S.K. Nair), (2010), Vol. 19, pp.

633-664.

23

”Economic Lot Scheduling with Resources in Parallel” (with C. Haksoz),

International Journal of Production Research, (2011), Vol. 49, pp. 2625-2641.

”Robust Scheduling on a Single Machine using Time Buffers”, (with D.

Briskorn and J. Leung), IIE Transactions, (2011), Vol. 43, pp. 383-398.

”Minimizing Makespan in an Ordered Flow Shop with Machine-Dependent

Processing Times”, (with B.-C. Choi and J. Leung), Journal of Combinatorial

Optimization, (2011), Vol. 22, pp. 797-818.

”Scheduling Jobs with Equal Processing Times subject to Machine El-

igibility Constraints”, (with K. Lee and J. Leung), Journal of Scheduling,

(2011), Vol. 14, pp. 27-38.

”Coordination Mechanisms with Hybrid Local Policy”, (with K. Lee and

J. Leung). Discrete Optimization, (2011), Vol. 8, pp. 513-524.

”Container Scheduling: Complexity and Algorithms”, (with B.-C. Choi,

K. Lee, J. Leung, and D. Briskorn), Production and Operations Management,

(2012), Vol. 21, pp. 115-129.

”Coordination Mechanisms for Parallel Machine Scheduling Problems”,

(with K. Lee and J. Leung), European Journal of Operational Research, (2012),

Vol. 220, pp. 305-313.

”Minimizing Total Weighted Delivery Time in Container Transportation

Scheduling”, (with B.-C. Choi, K. Lee, J. Leung, and D. Briskorn),

Naval Research Logistics, (2012), Vol. 59, pp. 266-277.

”Production Scheduling with History-Dependent Setup Times”, (with

K. Lee and L. Lei), Naval Research Logistics, (2012), Vol. 59, pp. 58-68.

”Bi-Criteria Scheduling with Machine Assignment Costs”, (with J. Leung, and K.

Lee), International Journal of Production Economics, (2012), Vol. 139, pp. 321-329.

”Optimal Production Scheduling when Demand Depends on Business Cycle”,

(with A. Cadenillas and P. Lakner), Operations Research, (2013), Vol. 61, pp.

1046-1062.

”Makespan Minimization in Online Scheduling with Machine Eligibility,”

(with K. Lee, and J. Leung), Annals of Operations Research, (2013), Vol. 204, pp.

189-222.

24

”Operations Scheduling with Multiple Resources and Transportation

Considerations”, (with K. Lee, L. Lei, and S. Wang), International Journal of

Production Research, (2013), Vol. 51, pp. 7071-7090.

”An Application of the ”Least Flexible Job First” Rule in Scheduling and

Queueing” (with J. Reed), Operations Research Letters, (2013), Vol. 41, pp. 618-

621.

”Appointment Scheduling with No-Shows and Overbooking” (with C.

Zacharias), Production and Operations Management, (2014), Vol. 23, pp. 788-

901.

”Fast Approximation Algorithms for Bi-Criteria Scheduling with Machine

Assignment Costs” (with K. Lee, J. Y.-T. Leung, Z.H. Jia, W. Li, and B.M.T.

Lin), European Journal of Operational Research, (2014), Vol. 238, pp. 54-64.

”Two Dimensional Load Balancing”, (with K. Lee and J. Y.-T. Leung),

Operations Research Letters, (2014), Vol. 42, pp. 539-544.

”Approximations to Optimal Sequences in Single-Gripper and Dual-Gripper

Robotic Cells in a Circular Layouts”, (with K.-S. Jung, N. Geismar, and C.

Sriskandarajah), IIE Transactions, (2015), Vol. 47, pp. 1-19.

”Scheduling in the Service Industries - An Overview”, (with C. Zacharias and

N. Zhu), Journal of Systems Science and Systems Engineering, (2015), Vol. 24,

pp. 1-48.

”Personnel Scheduling and Supplies Provisioning in Emergency Relief

Operations” (with L. Lei, L. Qi, S. Wang, and J. Yang), Annals of Operations

Research, (2015), Vol. 235, pp. 487-515.

”An Improved Binary Search Algorithm for the Multiple-Choice Knapsack

Problem” (with C. He, J. Y.-T. Leung and K. Lee), RAIRO-Operations Research,

(2016), Vol. 50, pp. 995-1001.

”Improved Algorithms for Single Machine Scheduling with Release Dates and

Rejection” (with C. He, J. Y.-T. Leung and K. Lee), 4OR, (2016), Vol. 14, pp. 41-

55.

25

”Scheduling a Single Machine with Parallel Batching to Minimize Makespan

and Total Rejection Cost” (with C. He, J. Y.-T. Leung and K. Lee), Discrete

Applied Mathematics, (2016), Vol. 204, pp. 150-163.

”Operational Risk in Financial Services: A Review and New Research

Opportunities” (with Y. Xu and M. Xue), Production and Operations Management,

(2017), Vol. 26, pp. 426-445.

”Managing Customer Arrivals in Service Systems with Multiple Servers”,

(with C. Zacharias), Manufacturing and Services Operations Management

(MSOM), (2017), Vol. 19, pp. 639-656.

”A Composite Dispatching Rule for Parallel Machine Scheduling with

Machine Eligibility Constraints”, (with H. Su and G. Wan), Naval Research

Logistics, (2017), Vol. 64, pp. 249-267.

“New Algorithms for Minimizing the Weighted Number of Tardy Jobs on a Single

Machine” (with D. Hermelin, S. Karhi, and D. Shabtay), Annals of Operations

Research, (2018), forthcoming.

”Budget Allocations in Operational Risk Management”, (with Y. Xu

and J. Zhang), Probability in the Engineering and Informational Sciences,

(2018), forthcoming.

”Throughput Optimization in Circular Dual-Gripper Robotic Cells” (with

K.-S. Jung, N. Geismar, C. Sriskandarajah), Production and Operations

Management, (2018), forthcoming.

Submitted

”Scheduling Operating Rooms with Elective and Emergency Surgeries”,

(with K.-S. Jung, C. Sriskandarajah, and V. Tiwari).

”Operational Risk Management: Coordinating Capital Investment and

Firm Value”, (with Y. Xu and L. Zhu).

”Performance Analysis of Overtaking Maneuvers at Bus Stops with Tandem

Berths”, (with B. Bian, N. Zhu, and S. Ma).

26

”Online Scheduling of Ordered Flow Shops”, (with K. Lee and F. Zheng).

“On the Parameterized Scheduling of a Single Machine with Rejection” (with D.

Hermelin, D. Shabtay, N. Talmon).

“Estimation of Room Durations for Bypass Surgeries” (with S. Schoonover-

Lagershausen and V. Tiwari).

NYU Stern School of Business - FOSTER PROVOST – external … · 2018-02-27 · IFORS...

Documents

Transcript of NYU Stern School of Business - FOSTER PROVOST – external … · 2018-02-27 · IFORS...