NX7002BKXB - Nexperia dNR1NSue/BVBC;LbB(llSuDnt6SN6NScNo Nexperia NX7002BKXB 60 V, dual N-channel...

NX7002BKXB60 V, dual N-channel Trench MOSFET30 June 2015 Product data sheet

1. General descriptionDual N-channel enhancement mode Field-Effect Transistor (FET) in a leadless ultra smallDFN1010B-6 (SOT1216) Surface-Mounted Device (SMD) plastic package using TrenchMOSFET technology.

2. Features and benefits• Logic-level compatible• Leadless ultra small and ultra thin SMD plastic package 1.1 x 1.0 x 0.37 mm• Trench MOSFET technology• ElectroStatic Discharge (ESD) protection > 2 kV HBM

3. Applications• Relay driver• High-speed line driver• Low-side loadswitch• Switching circuits

4. Quick reference dataTable 1. Quick reference dataSymbol Parameter Conditions Min Typ Max Unit

Per transistor

VDS drain-source voltage - - 60 V

VGS gate-source voltage

Tj = 25 °C

-20 - 20 V

VGS = 10 V; Tsp = 25 °C - - 330 mAID drain current

VGS = 10 V; Tamb = 25 °C [1] - - 260 mA

Static characteristics (per transistor)

RDSon drain-source on-stateresistance

VGS = 10 V; ID = 200 mA; Tj = 25 °C - 2.2 2.8 Ω

[1] Device mounted on an FR4 Printed-Circuit Board (PCB), single-sided copper, tin-plated and mounting padfor drain 1 cm2.

© Nexperia B.V. 2017. All rights reserved

Nexperia NX7002BKXB60 V, dual N-channel Trench MOSFET

NX7002BKXB All information provided in this document is subject to legal disclaimers.

Product data sheet 30 June 2015 2 / 17

5. Pinning informationTable 2. Pinning informationPin Symbol Description Simplified outline Graphic symbol

1 S1 source TR1

2 G1 gate TR1

3 D2 drain TR2

4 S2 source TR2

5 G2 gate TR2

6 D1 drain TR1

7 D1 drain TR1

8 D2 drain TR2

Transparent top view

1 67

8

2

3

5

4

DFN1010B-6 (SOT1216)

017aaa256

D1

S1

G1

D2

S2

G2

6. Ordering informationTable 3. Ordering information

PackageType number

Name Description Version

NX7002BKXB DFN1010B-6 DFN1010B-6: plastic thermal enhanced ultra thin small outlinepackage; no leads; 6 terminals

SOT1216

7. MarkingTable 4. Marking codesType number Marking code

NX7002BKXB 00 01 01

MARKING CODE(EXAMPLE)

PIN 1 INDICATION MARK

YEAR DATECODE

READING DIRECTION

READING EXAMPLE:

110110 aaa-007665

MARK-FREE AREA

Fig. 1. DFN1010B-6 (SOT1216) binary marking code description





8. Limiting valuesTable 5. Limiting valuesIn accordance with the Absolute Maximum Rating System (IEC 60134).Symbol Parameter Conditions Min Max Unit

Per transistor

VDS drain-source voltage - 60 V

VGS gate-source voltage

Tj = 25 °C

-20 20 V

VGS = 10 V; Tsp = 25 °C - 330 mA

VGS = 10 V; Tamb = 25 °C [1] - 260 mA

ID drain current

VGS = 10 V; Tamb = 100 °C [1] - 170 mA

IDM peak drain current Tamb = 25 °C; single pulse; tp ≤ 10 µs - 0.8 A

[2] - 285 mWTamb = 25 °C

[1] - 407 mW

Ptot total power dissipation

Tsp = 25 °C - 4032 mW

Source-drain diode

IS source current Tamb = 25 °C [1] - 0.2 A

Per device

Tj junction temperature -55 150 °C

Tamb ambient temperature -55 150 °C

Tstg storage temperature -65 150 °C

[1] Device mounted on an FR4 Printed-Circuit Board (PCB), single-sided copper, tin-plated and mounting padfor drain 1 cm2.

[2] Device mounted on an FR4 PCB, single-sided copper, tin-plated and standard footprint.





Tj (°C)- 75 17512525 75- 25

017aaa123

40

80

120

Pder(%)

0

Fig. 2. MOSFET transistor: Normalized totalpower dissipation as a function of junctiontemperature

Tj (°C)- 75 17512525 75- 25

017aaa124

40

80

120

Ider(%)

0

Fig. 3. MOSFET transistor: Normalized continuousdrain current as a function of junctiontemperature

aaa-015676

VDS (V)10-1 102101

10-1

10-2

1

ID(A)

10-3

Limit RDSon = VDS/ID

(1)

(2)(3)

(4)

(5)(6)

IDM = single pulse(1) tp = 10 µs(2) tp = 1 ms(3) DC; Tsp = 25 °C(4) tp = 10 ms(5) tp = 100 ms

(6) DC; Tamb = 25 °C; drain mounting pad 1 cm2

Fig. 4. Safe operating area; junction to ambient; continuous and peak drain currents as a function of drain-source voltage





9. Thermal characteristicsTable 6. Thermal characteristicsSymbol Parameter Conditions Min Typ Max Unit

Per transistor

[1] - 276 307 K/WRth(j-a) thermal resistancefrom junction toambient

in free air

[2] - 381 438 K/W

Rth(j-sp) thermal resistancefrom junction to solderpoint

- 27 31 K/W

[1] Device mounted on an FR4 PCB, single-sided copper, tin-plated and mounting pad for drain 1 cm2.[2] Device mounted on an FR4 PCB, single-sided copper, tin-plated and standard footprint.

aaa-015677

tp (s)10-3 102 10310110-2 10-1

102

103

Zth(j-a)(K/W)

10

duty cycle = 1

0.020.01

0

0.05

0.10

0.250.33

0.500.75

0.20

FR4 PCB, standard footprint

Fig. 5. Transient thermal impedance from junction to ambient as a function of pulse duration; typical values





aaa-015678

tp (s)10-3 102 10310110-2 10-1

102

103

Zth(j-a)(K/W)

10

duty cycle = 1

0.020.01

0

0.10

0.25

0.750.50

0.05

0.20

0.33

FR4 PCB, mounting pad for drain 1 cm2

Fig. 6. Transient thermal impedance from junction to ambient as a function of pulse duration; typical values





10. CharacteristicsTable 7. CharacteristicsSymbol Parameter Conditions Min Typ Max Unit

Static characteristics (per transistor)

V(BR)DSS drain-sourcebreakdown voltage

ID = 250 µA; VGS = 0 V; Tj = 25 °C 60 - - V

VGSth gate-source thresholdvoltage

ID = 250 µA; VDS = VGS; Tj = 25 °C 1.1 1.6 2.1 V

IDSS drain leakage current VDS = 60 V; VGS = 0 V; Tj = 25 °C - - 1 µA

VGS = 20 V; VDS = 0 V; Tj = 25 °C - - 10 µA

VGS = -20 V; VDS = 0 V; Tj = 25 °C - - -10 µA

VGS = 10 V; VDS = 0 V; Tj = 25 °C - - 1 µA

VGS = -10 V; VDS = 0 V; Tj = 25 °C - - -1 µA

VGS = 5 V; VDS = 0 V; Tj = 25 °C - - 0.3 µA

IGSS gate leakage current

VGS = -5 V; VDS = 0 V; Tj = 25 °C - - -0.3 µA

VGS = 10 V; ID = 200 mA; Tj = 25 °C - 2.2 2.8 Ω

VGS = 10 V; ID = 200 mA; Tj = 150 °C - 4.5 5.7 Ω

RDSon drain-source on-stateresistance

VGS = 5 V; ID = 200 mA; Tj = 25 °C - 2.5 3.2 Ω

gfs forwardtransconductance

VDS = 10 V; ID = 200 mA; Tj = 25 °C - 600 - mS

RG gate resistance f = 1 MHz - 2.5 - Ω

Dynamic characteristics (per transistor)

QG(tot) total gate charge - 1 - nC

QGS gate-source charge - 0.12 - nC

QGD gate-drain charge

VDS = 30 V; ID = 200 mA; VGS = 10 V;Tj = 25 °C

- 0.18 - nC

Ciss input capacitance - 23.6 - pF

Coss output capacitance - 4.6 - pF

Crss reverse transfercapacitance

VDS = 10 V; f = 1 MHz; VGS = 0 V;Tj = 25 °C

- 3 - pF

td(on) turn-on delay time - 4.7 - ns

tr rise time - 4.3 - ns

td(off) turn-off delay time - 6.9 - ns

tf fall time

VDS = 50 V; ID = 200 mA; VGS = 10 V;RG(ext) = 6 Ω; Tj = 25 °C

- 2.9 - ns

Source-drain diode (per transistor)

VSD source-drain voltage IS = 200 mA; VGS = 0 V; Tj = 25 °C - 0.87 1.2 V





VDS (V)0 542 31

aaa-014131

0.4

0.6

0.2

0.8

1ID(A)

0

2.5 V

3.0 V

3.5 V4.5 V

VGS = 10 V

Tj = 25 °C

Fig. 7. Output characteristics: drain current as afunction of drain-source voltage; typical values

aaa-014132

VGS (V)0 321

10-4

10-5

10-3

ID(A)

10-6

(1) (2) (3)

Tj = 25 °C; VDS = 5 V(1) minimum values(2) typical values(3) maximum values

Fig. 8. Sub-threshold drain current as a function ofgate-source voltage

ID (A)0 0.80.60.2 0.4

aaa-014133

4

2

6

8

RDSon(Ω)

0

VGS = 10 V

3.5 V

4.5 V

4.0 V

3.0 V2.5 V

Tj = 25 °C

Fig. 9. Drain-source on-state resistance as a functionof drain current; typical values

VGS (V)0 1084 62

aaa-014134

4

2

6

8

RDSon(Ω)

0

(1)

(2)

ID = 0.2 A(1) Tj = 150 °C(2) Tj = 25 °C

Fig. 10. Drain-source on-state resistance as a functionof gate-source voltage; typical values





VGS (V)0 542 31

aaa-014135

0.2

0.4

0.6

ID(A)

0

(1)

(2)

VDS > ID × RDSon

(1) Tj = 25 °C(2) Tj = 150 °C

Fig. 11. Transfer characteristics: drain current as afunction of gate-source voltage; typical values

Tj (°C)-60 1801200 60

aaa-014136

1.0

1.5

0.5

2.0

2.5a

0

Fig. 12. Normalized drain-source on-state resistanceas a function of junction temperature; typicalvalues

Tj (°C)-60 1801200 60

aaa-014137

1.0

.1.5

0.5

2.0

2.5VGS(th)

(V)

0

(1)

(2)

(3)

ID = 0.25 mA; VDS = VGS

(1) maximum values(2) typical values(3) minimum values

Fig. 13. Gate-source threshold voltage as a function ofjunction temperature

VDS (V)10-1 102101

aaa-014138

10

1

102

C(pF)

10-1

(1)

(2)

(3)

f = 1 MHz; VGS = 0 V(1) Ciss

(2) Coss

(3) Crss

Fig. 14. Input, output and reverse transfer capacitancesas a function of drain-source voltage; typicalvalues





QG (nC)0 1.00.80.4 0.60.2

aaa-014139

4

6

2

8

10VGS(V)

0

ID = 0.2 A; VDS = 30 V; Tamb = 25 °C

Fig. 15. Gate-source voltage as a function of gatecharge; typical values

003aaa508

VGS

VGS(th)

QGS1

QGS2

QGD

VDS

QG(tot)

ID

QGS

VGS(pl)

Fig. 16. MOSFET transistor: Gate charge waveformdefinitions

aaa-014140

VSD (V)0 1.20.80.4

0.10

0.05

0.15

0.20

IS(A)

0

(1)

(2)

VGS = 0 V(1) Tj = 150 °C(2) Tj = 25 °C

Fig. 17. Source current as a function of source-drain voltage; typical values





11. Test information

t1t2

P

t006aaa812

duty cycle δ =

t1

t2

Fig. 18. Duty cycle definition





12. Package outline

ReferencesOutlineversion

Europeanprojection Issue date

IEC JEDEC JEITA

SOT1216

sot1216_po

13-03-0513-03-06

Unit

mmminnommax

1.05 0.320.1550.125

0.205

A

Dimensions (mm are the original dimensions)

Note1. Dimension A is including plating thickness.

DFN1010B-6: plastic thermal enhanced ultra thin small outline package; no leads;6 terminals; body: 1.1 x 1.0 x 0.37 mm SOT1216

A1 b

0.15

D D1 e e1 L

0.400.370.34

0.04 1.151.10

0.400.230.18

scale

0 1 mm

0.95

1.05

E E1

0.22

0.300.2750.350.35 1.00 0.25

b (6x)

e epin 1index area

visible depend uponused manufacturingtechnology (6x)

D

L (6x)

D1 (2x)

E

A1

A

E1 (2x)

1 32

56 4

e1 e1

Fig. 19. Package outline DFN1010B-6 (SOT1216)





13. Soldering

SOT1216Footprint information for reflow soldering of DFN1010B-6 package

sot1216_fr

solder land

solder resist

solder land plus solder paste

occupied area

Dimensions in mm

Issue date 13-03-0614-07-28

0.3 (6x)

1.10.6

0.250.35

0.35

0.51.21.3

0.25

1

1.35

0.35

0.15 0.150.2 (6x)

0.35

0.9

Fig. 20. Reflow soldering footprint for DFN1010B-6 (SOT1216)





14. Revision historyTable 8. Revision historyData sheet ID Release date Data sheet status Change notice Supersedes

NX7002BKXB v.2 20150630 Product data sheet - NX7002BKXB v.1

Modification: • Change of binary marking code positionNX7002BKXB v.1 20141210 Product data sheet - -





15. Legal information

15.1 Data sheet statusDocumentstatus [1][2]

Productstatus [3]

Definition

Objective[short] datasheet

Development This document contains data fromthe objective specification for productdevelopment.

Preliminary[short] datasheet

Qualification This document contains data from thepreliminary specification.

Product[short] datasheet

Production This document contains the productspecification.

[1] Please consult the most recently issued document before initiating orcompleting a design.

[2] The term 'short data sheet' is explained in section "Definitions".[3] The product status of device(s) described in this document may have

changed since this document was published and may differ in case ofmultiple devices. The latest product status information is available onthe Internet at URL http://www.nexperia.com.

15.2 DefinitionsPreview — The document is a preview version only. The document is stillsubject to formal approval, which may result in modifications or additions.Nexperia does not give any representations or warranties as tothe accuracy or completeness of information included herein and shall haveno liability for the consequences of use of such information.

Draft — The document is a draft version only. The content is still underinternal review and subject to formal approval, which may result inmodifications or additions. Nexperia does not give anyrepresentations or warranties as to the accuracy or completeness ofinformation included herein and shall have no liability for the consequencesof use of such information.

Short data sheet — A short data sheet is an extract from a full data sheetwith the same product type number(s) and title. A short data sheet isintended for quick reference only and should not be relied upon to containdetailed and full information. For detailed and full information see therelevant full data sheet, which is available on request via the local Nexperiasales office. In case of any inconsistency or conflict with theshort data sheet, the full data sheet shall prevail.

Product specification — The information and data provided in a Productdata sheet shall define the specification of the product as agreed betweenNexperia and its customer, unless Nexperia andcustomer have explicitly agreed otherwise in writing. In no event however,shall an agreement be valid in which the Nexperia productis deemed to offer functions and qualities beyond those described in theProduct data sheet.

15.3 DisclaimersLimited warranty and liability — Information in this document is believedto be accurate and reliable. However, Nexperia does not giveany representations or warranties, expressed or implied, as to the accuracyor completeness of such information and shall have no liability for theconsequences of use of such information. Nexperia takes noresponsibility for the content in this document if provided by an informationsource outside of Nexperia.

In no event shall Nexperia be liable for any indirect, incidental,punitive, special or consequential damages (including - without limitation -lost profits, lost savings, business interruption, costs related to the removalor replacement of any products or rework charges) whether or not suchdamages are based on tort (including negligence), warranty, breach ofcontract or any other legal theory.

Notwithstanding any damages that customer might incur for any reasonwhatsoever, Nexperia’s aggregate and cumulative liability towardscustomer for the products described herein shall be limited in accordancewith the Terms and conditions of commercial sale of Nexperia.

Right to make changes — Nexperia reserves the right tomake changes to information published in this document, including withoutlimitation specifications and product descriptions, at any time and withoutnotice. This document supersedes and replaces all information supplied priorto the publication hereof.

Suitability for use — Nexperia products are not designed,authorized or warranted to be suitable for use in life support, life-critical orsafety-critical systems or equipment, nor in applications where failure ormalfunction of a Nexperia product can reasonably be expectedto result in personal injury, death or severe property or environmentaldamage. Nexperia and its suppliers accept no liability forinclusion and/or use of Nexperia products in such equipment orapplications and therefore such inclusion and/or use is at the customer’s ownrisk.

Quick reference data — The Quick reference data is an extract of theproduct data given in the Limiting values and Characteristics sections of thisdocument, and as such is not complete, exhaustive or legally binding.

Applications — Applications that are described herein for any of theseproducts are for illustrative purposes only. Nexperia makes norepresentation or warranty that such applications will be suitable for thespecified use without further testing or modification.

Customers are responsible for the design and operation of theirapplications and products using Nexperia products, and Nexperiaaccepts no liability for any assistance with applications orcustomer product design. It is customer’s sole responsibility to determinewhether the Nexperia product is suitable and fit for thecustomer’s applications and products planned, as well as for the plannedapplication and use of customer’s third party customer(s). Customers shouldprovide appropriate design and operating safeguards to minimize the risksassociated with their applications and products.

Nexperia does not accept any liability related to any default,damage, costs or problem which is based on any weakness or defaultin the customer’s applications or products, or the application or use bycustomer’s third party customer(s). Customer is responsible for doing allnecessary testing for the customer’s applications and products using Nexperiaproducts in order to avoid a default of the applicationsand the products or of the application or use by customer’s third partycustomer(s). Nexperia does not accept any liability in this respect.

Limiting values — Stress above one or more limiting values (as defined inthe Absolute Maximum Ratings System of IEC 60134) will cause permanentdamage to the device. Limiting values are stress ratings only and (proper)operation of the device at these or any other conditions above thosegiven in the Recommended operating conditions section (if present) or theCharacteristics sections of this document is not warranted. Constant orrepeated exposure to limiting values will permanently and irreversibly affectthe quality and reliability of the device.

Terms and conditions of commercial sale — Nexperiaproducts are sold subject to the general terms and conditions of commercialsale, as published at http://www.nexperia.com/profile/terms, unless otherwiseagreed in a valid written individual agreement. In case an individualagreement is concluded only the terms and conditions of the respectiveagreement shall apply. Nexperia hereby expressly objects toapplying the customer’s general terms and conditions with regard to thepurchase of Nexperia products by customer.

No offer to sell or license — Nothing in this document may be interpretedor construed as an offer to sell products that is open for acceptance or the

http://www.nexperia.com/profile/terms





grant, conveyance or implication of any license under any copyrights, patentsor other industrial or intellectual property rights.

Export control — This document as well as the item(s) described hereinmay be subject to export control regulations. Export might require a priorauthorization from competent authorities.

Non-automotive qualified products — Unless this data sheet expresslystates that this specific Nexperia product is automotive qualified,the product is not suitable for automotive use. It is neither qualified nortested in accordance with automotive testing or application requirements.Nexperia accepts no liability for inclusion and/or use of non-automotive qualified products in automotive equipment or applications.

In the event that customer uses the product for design-in and use inautomotive applications to automotive specifications and standards,customer (a) shall use the product without Nexperia’s warrantyof the product for such automotive applications, use and specifications, and(b) whenever customer uses the product for automotive applications beyondNexperia’s specifications such use shall be solely at customer’sown risk, and (c) customer fully indemnifies Nexperia for anyliability, damages or failed product claims resulting from customer design anduse of the product for automotive applications beyond Nexperia’sstandard warranty and Nexperia’s product specifications.

Translations — A non-English (translated) version of a document is forreference only. The English version shall prevail in case of any discrepancybetween the translated and English versions.

15.4 TrademarksNotice: All referenced brands, product names, service names andtrademarks are the property of their respective owners.





16. Contents1 General description ............................................... 12 Features and benefits ............................................13 Applications ........................................................... 14 Quick reference data ............................................. 15 Pinning information ...............................................26 Ordering information .............................................27 Marking ................................................................... 28 Limiting values .......................................................39 Thermal characteristics .........................................510 Characteristics .......................................................711 Test information ................................................... 1112 Package outline ................................................... 1213 Soldering .............................................................. 1314 Revision history ...................................................1415 Legal information .................................................1515.1 Data sheet status ............................................... 1515.2 Definitions ...........................................................1515.3 Disclaimers .........................................................1515.4 Trademarks ........................................................ 16

© Nexperia B.V. 2017. All rights reservedFor more information, please visit: http://www.nexperia.comFor sales office addresses, please send an email to: [email protected] Date of release: 30 June 2015

NX7002BKXB - Nexperia dNR1NSue/BVBC;LbB(llSuDnt6SN6NScNo Nexperia NX7002BKXB 60 V, dual N-channel...

Documents

Transcript of NX7002BKXB - Nexperia dNR1NSue/BVBC;LbB(llSuDnt6SN6NScNo Nexperia NX7002BKXB 60 V, dual N-channel...