NVR Operation Manual

7/21/2019 NVR Operation Manual

1/33

N V R

User manual

[]


2/33

[]


3/33

1

1 contents

Safety instructions

The first chapter product overview....................................................................................................................................6

1.Product appearance..............................................................................................................................................................6

1.2Hardware parameters .........................................................................................................................................................7

The second chapter System startup .................................................................................................................................8

2.1 System topoo!y................................................................................................................................................................8

2.2 "nstain! the hard dis#......................................................................................................................................................8

2.$ To connect to the "nternet .................................................................................................................................................8

2.% Super administrator o!in .................................................................................................................................................82.%.1.&o! in..............................................................................................................................................................................8

The third chapter "ma!e manipuation..............................................................................................................................'

The fourth chapter ()* main menu ................................................................................................................................1$

%.1The remote device..............................................................................................................................................................1$

%.1.1The remote device confi!uration information................................................................................................................1$

%.2 )ideo pay+ac# .................................................................................................................................................................1%

%.$ ,ie +ac#up........................................................................................................................................................................1-

%.% onfi!uration mana!ement ..............................................................................................................................................16

%.%.1 system.............................................................................................................................................................................16

%.%.2 video...............................................................................................................................................................................16

%.%.$ The video Settin!s .........................................................................................................................................................17

%.%.% The aarm is set...............................................................................................................................................................18

%.%.- (etwor# Settin!s.............................................................................................................................................................2/

%.%.6 0ser mana!ement............................................................................................................................................................22

%.%.7 pt ..................................................................................................................................................................................2$

%.%.8 The defaut Settin!s.........................................................................................................................................................2%

%.- System maintenance...........................................................................................................................................................2%%.6 System information.............................................................................................................................................................2-

%.6.1 System information..........................................................................................................................................................26

%.6.2 The o!..............................................................................................................................................................................26

%.6.$ The networ# information..................................................................................................................................................27

The appendi ,34..................................................................................................................................................................28

[]


4/33

2

[]

preface

Thank you choose our products, we will wholeheartedly provide the best service for you.

Content of this manual are for reference only. This manual content will be according to the product func

tion enhancement and update, if there are any update, please pay attention to our company website, upda

ting content will join in the updated version of this manual.

Where manual may contain technical inaccuracies or product function and the operation is not in plac

e or printing errors, sincerely hope you can give us feedback in a timely manner, in the later version, we wil

l try to enrich and perfect.


5/33

$

[]

Safety instructions

1efore use, please take the time to read the instructions and save this manual after reading

2Will !"# placed in high or low temperature environment, before using !"# will !"# pla

ced in the average temperature $room temperature%

3To avoid !"# placed by collision or product in the cart would be shaken or on the table

4Use the !"# fields away from magnetic fields

5&on't make the products be affected with damp be affected with damp or near the water.

6!"# away from dust, sand and mud $dirt%

7ehind the host and the opening is to provide ventilation, to ensure the !"# can avoid overheating during continuous working, these openings cannot be placed on the bed, sofa, rug, or simi

lar on the surface to prevent clogging

8!ot to !"# placed near or on the radiator or heating.

9#eference voltage, output voltage conforms to provide and confirm the (uantity

10This device must be grounded, this product is e(uipped with three plug ground, line here, onl

y comply with the electrical plug seat configuration grounding slot.

11&o not put any objects from the seams of the host in, they are likely to encounter d

angerous power supply, so as to cause a fire or electric shock.

12efore cleaning, to pull out the power from the socket. )eep the !"# dry, do not use li(uid de

tergent cleaners or wet cloth, wet gas, please try using a slightly damp cloth to wipe.


6/33

%

[]


7/33

-

[]

statement

This is grade * products, in the living environment, this product may cause radio interference. +n this case, may r

e(uire the user to take practical measures to its interference.

(uipment in the lithium battery for replacement, please choose to use a factory with the same type of battery, l

est produce risk, such as an e-plosion, and so on and so forth. #ecommend to contact maintenance personnel p

rocessing.

!otices warning of manuals, and shall use the following format

To provide more relevant to the subject matter of the current content, on /ay affect the normal operation of the

system operation

0or special instructions.


8/33

6

[]

1

2

3

4

5

6

7 chapterone1roduct overview

1.11roduct appearance

12ost positive as shown


9/33

7

[]

2The host on the back as shown


10/33

8

[]

1.22ardware parameters

!etwork cameraNVRseries

1roduct features

Supports h. 345 compressed file decoding

Support U disk, remote network upgrades, serial port upgrade

Support 6!"+0, #TS1, supporting 789: +1C agreement, etc

To support remote configuration +pcam basic parameters

Support C"S and ";* output at the same time, the automatic identification of 6S& display device< There

are 800*600,1024*768,1280*10241440*900 four< Can be achieved through the menu and button=

pad menu output switch

Support 9 road 9>3? @ 9>3? p hd output< Can be downward compatible with 93:? @ A3? ,93:0@ A3?hd outp

ut

Support four=way playback at the same timeNTSC:60fps/1080p120fps/

720pD1CIFP!: 50fps/1080p100fps/720pD1CIF


11/33

'

The second chapter

System startup

2.1System topology

[]


12/33

1/

[]

2.2+nstalling the hard disk

2.3To connect to the +nternet

2.4Super administrator login

2.4.1.Bog in

6pen the !"# host power button, the system will automatically run into the monitoring interface,

*fter entering the monitoring interface, the system all button is locked, the mouse right click choose picture, p

op up the following interface

nter the system default super administrator user id for the first time "#$%n

Super administrator password by default "#$%n

!ote in the input bo- system embedded soft keyboard. When the !"# didn't pick up the keyboard, or the ke

yboard is broken, can use soft keyboard to input !umbers, upper and lower case letters.

&'%&()o enterNVR


13/33

11

[]

The third chapter

+mage manipulation

!"# start junior into the interface


14/33

12

[]

1The main menu

2"ideo (uery $click to enter the video (uery interface, can (uery the latest surveillance video.%

3The mute switch

4+&-+#%ng

5polling

6PIP1.1

7PIP1.2


15/33

1$

[]

8lectronic amplification

9s-p ""+$

10PT2

Choose different channel, select the corresponding path more braket for direction, turn times, focus, aperture

and moving speed for debugging. Such as the right

11Shutdown click on the 1rompt shutdown, restart, lock $lock is to make the software into the lock

ed state, again into the need to enter the account password%


16/33

1%

[]

The fourth chapter

!"# main menu

4.1The remote device

&'%&( +n the following interface

4.1.1The remote device configuration information

Click the search button access to attach the +1C +1 address192168

DaddE DeditE button is on the increase of the +1C channel and +1C +1 address Settings


17/33

1-

[]

4.2"ideo playback

Click on the button

1*ccording to the time the (uery:

Can be set a time to view the video of each channel in a certain time period

2The (uery according to the document:

Through the system to save the video file to find the needed video of a certain time


18/33

16

[]

4.30ile backup

C'%&( -n ' -n The pop=up shown below

0irst on the left select (uery the date, time $start = end%, check the type of channel need to view, then click searc

h, later will show on the right in accordance with the (uery file, time, siFe will be displayed.


19/33

17

[]

4.4Configuration management

as shown in figure G

4.4.1 system

0rom the main menu click function sys$asic set dateHtimeHsummer seasonalH

!T1

asic setup

Systemformats P!/NTSC

6utput interface !IVT

Banguage selection C'%ns/ng%s'

1olling time Set the polling time

+n order to set +#+/#everse order/enu lock /enu lock time

1 V +s-%-n +"%-

2 800.600/1024.768/1280.720/1280.960/1280.1024/1440.900/1920.1080

The volume *djust the siFe of sound

1 Time date below+ssue date format /onthHdayHyearH or yearHmonthHday

&ate sets the date

Time format 93 hours, 35 hours a day

Time set the !"#

Time Fone set time Fone

The +1C time synchroniFation time !"# to +1C.

2 &aylight saving time below

&aylight saving time switch turn onHoff

/ode by default, the custom, can set the daylight saving time, in the custom date.%

3 !T1 $network time synchroniFation, and set a time server, and the synchroniFation time interval, etc.% Set the !T1 parameter switch, time interval, the port, the server +1 address.


20/33

18

[]

4.4.2 video

C'%&( nter the parameter Settings window, select the channel number set diagra

m is as follows

Channel number Select the corresponding channelC01/C02/C03/C04

Channel number name modify the name of the channel number.

1osition name upperHlower leftHrightHrightHclosed

The +1C name can modify the name of the +1C.

+1C name position upperHclosed

Color set &'%&( nter setup interface

Selected channel number adjust channel number corresponding to the interface of chromaticity and brigh

tness, contrast, saturation.

1review switch openHclose

1review time display switch openHclose

Superposition of video time switch openHclose

Click save or click restore default after modification


21/33

1'

[]

4.4.3The video Settings

C'%&( nter the interface as shown in figure

Channel number C2?9 H C2?3 H C2?7 H C2?5

"ideo switch openHclose

+mage (uality e-cellentHgood H

#esolution the default A3? p

0rame rate select the siFe of the frame rate

*udio record openHclose

"ideo timing closureHswitch on video

1ackaging time choose packing time

9 hour drive cover automatic H 7 hours

4.4.4 Alarm settin

C'%&( -n 1op up the overall configuration, abnormal, mobile detection, the +H6,

7 Settings window

Choose the overall configuration interface is as follows


22/33

2/

[]

Set the time of alarm ,output video delay time,hum of the time, 1re = recorded time switch,0ull screen del

ay time

9. Select anomalies interface is as follows

Set the hard disk remaining siFe $each interface support capacity not less than 7 T hard drive $support 3 T% first, support S*T*+++ interface

*nd 45 / of cache disk needs to be compatible with sales market recently popular switch alarm output siFe

of hard drive failure hard disk%, switch network abnormal video keep out S& card failure. $support hard disk, ha

rd disk full error, +1 conflict, the network dropped, illegal access $user name, password input error more than v

alid number%, video signal instability events such as abnormal alarm< triggers the corresponding alarm linkage%

2 Choose motion detecting interface $support motion detecting system, when there is moving object motion detecting area, system can detect a

nd touch the video, voice alarm and other functions%

I 1 J/otion detecting area the diagram below

Set the motion detecting area, setting method is as follows select the camera channel, hold the left mou

se button move the mouse in the picture. Can be pulled out a piece of red rectangular area, the area is the mot

ion detecting area. 2old the left mouse button can do the same cancel motion detecting area.

2;Sensitivity set the sensitivity of motion detecting area, the higher the sensitivity, then the stronger the a

bility to detect moving objects, has e-cellent good general optimal four gear selection.

3;1rotection plan the diagram below


23/33

21

[]

+n front of the video alarm%, the single machine in the bo- behind the week drag the left mouse butt

on inside the bo- of the green cursor, choose alarm video of the time, date, can be separately set up mu

ltiple periods every day according to a week.% .

3 Select the +H6 interface Set the alarm source channel number select +H6 alarm switch protection plan time and alarm output pr

e = recorded buFFer mailH0tp $video is missing, +H6 alarm, video occlusions, motion detecting, send mai

l notification events such as hard disk full, provide mail service set parameters test function, convenien

t use, support for video file and screenshots% on the 0tp server via 0tp protocol selection switch.

!ote please fill in after clicking the save button to take effect

4.4.5 net settin

1C'%&( -nSuch as the picture -


24/33

22

[]

Select the address type $static +1, &2C1, 1116% after modify various parameters.

2TT1 service port if it is remote monitoring by +nternet e-plorer, and general computer 2TT1 server port

is :?, you can change to other operating systems or other network operating systems software don't conflict to

other !umbers, such as >?:?:, etc., if you have changed the port, in + for remote access, please add 2TT1 bef

ore the domain name, put a colon at the end of the domain name, such as :? to >?, the url you entered is http

HH. @ @ @ @ @ @ @ @ @ @ @ @ @ @. 6rg, >?.

The static +1 Settings the host's +1 address, subnet mask, gateway in this setting.

!etwork port the port can be changed, the best port port is set to system and other programs do not conflict.

!hane the net"or# port:C'"ng ' n


25/33

2$

[]

1 DDNS

2 $"%

3 /obile phone $at least support the +phone and *ndroid mobile phone system< support screens

hots and image browsing, 1TK control, voice alarm, etc< to support 5 road monitor< at the same time

3Click +1C network Settings screen select pass set +1C address type network port number the &!S server +1 address, subnet mask gateway

!ote please fill in after clicking the save button to take effect

4.4.6ser management

Super administrator login the !"# system, administrator user $the default user id admin default super admi

n password ::::::

% can change the user password, ordinary users log in after can't modify the other users in the user management information% set up the user's permissions to operate.

C'%&( -n ,+n the user preferences window.


26/33

2%

[]

1 !ew users, such as the picture on the right

Click on the new users

NVR Operation Manual

Documents

Transcript of NVR Operation Manual