NV Series - DIE ERSTEmail.die-erste.com/de/NV.pdfTaiwan 5F-1, No. 936, Wen-Xin Rd., Sec. 4, Taichung...
14
NV Series Needle Valves " – 2” (DN6 - DN50) 8 ½
Transcript of NV Series - DIE ERSTEmail.die-erste.com/de/NV.pdfTaiwan 5F-1, No. 936, Wen-Xin Rd., Sec. 4, Taichung...
NV Series
Needle Valves" – 2” (DN6 - DN50)8½
SCREWED BONNET NEEDLE VALVE 6000PSI
1
8
ShanghaiRm. 1803-A, No. 678,
Gu-Bei Rd.,Shanghai, China
T +86 (21) 5777 3810F +86 (21) 5777 3819
Taiwan5F-1, No. 936,
Wen-Xin Rd., Sec. 4,Taichung City 406, Taiwan
T +886 (4) 2231 0059F +886 (4) 2236 0236
Materials List:
Dimensions (mm): SIZEin DN
Features: Designed for use in general purpose applica ons to isolate or vent system mediaLive loaded packing system and packing nut enable easy external adjustmentLow opera on torqueV- p stem as standard, non-rota ng stem may be available upon requestCustomized op ons may be available upon request
Body Material ASTM A351 CF8M, 1.4408ASTM A216 WCB, 1.0619Barstock material available upon request
Size Range1/4" - 1" (DN8-DN25)
Pressure Ra ng6000 psig (413 bar)
End Connec onFemale thread, male thread Pipe bu weld, pipe sockweldTube bu weld, tube socketweldTube ng - Lok-typeMixed end connec ons are available
Temperature Range:PTFE: -20°C ~ +180°C (-4°F~356°F) PEEK: -20'C ~ +240°C (-4°F~464°F) GRAFOIL: -20'C ~ +450°C (-4°F~842°F)
Flow Pa erns:Available in straight and angle ow pa erns
Opera on Type:T-handle as standard, handwheel op onal
Stem Op ons:V- p stem as standardNon-rota ng v- p stem for high cycle applica ons may be available
SCREWED BONNET NEEDLE VALVE 6000PSI
2
8
ShanghaiRm. 1803-A, No. 678,
Gu-Bei Rd.,Shanghai, China
T +86 (21) 5777 3810F +86 (21) 5777 3819
Taiwan5F-1, No. 936,
Wen-Xin Rd., Sec. 4,Taichung City 406, Taiwan
T +886 (4) 2231 0059F +886 (4) 2236 0236
Dimensions (mm): SIZEin DN
Materials List:
Materials List:
Dimensions (mm): SIZEin DN
*
* Also available in stainless steel upon request
SCREWED BONNET NEEDLE VALVE 6000PSI
3
8
ShanghaiRm. 1803-A, No. 678,
Gu-Bei Rd.,Shanghai, China
T +86 (21) 5777 3810F +86 (21) 5777 3819
Taiwan5F-1, No. 936,
Wen-Xin Rd., Sec. 4,Taichung City 406, Taiwan
T +886 (4) 2231 0059F +886 (4) 2236 0236
Materials List:
Dimensions (mm): SIZEin DN
SCREWED BONNET ANGLE TYPE NEEDLE VALVE 6000PSI
4
8
ShanghaiRm. 1803-A, No. 678,
Gu-Bei Rd.,Shanghai, China
T +86 (21) 5777 3810F +86 (21) 5777 3819
Taiwan5F-1, No. 936,
Wen-Xin Rd., Sec. 4,Taichung City 406, Taiwan
T +886 (4) 2231 0059F +886 (4) 2236 0236
Features: Designed for use in general purpose applica ons Live loaded packing system and packing nut enable easy external adjustmentLow opera on torqueV- p stem as standard, non-rota ng stem may be available upon requestCustomized op ons may be available upon request
Body Material ASTM A351 CF8M, 1.4408ASTM A216 WCB, 1.0619Barstock material available upon request
Size Range1/4" - 1" (DN8-DN25)
Pressure Ra ng6000 psig (413 bar)
End Connec onFemale thread, male thread Pipe bu weld, pipe sockweldTube bu weld, tube socketweldTube ng - Lok-typeMixed end connec ons are available
Temperature Range:PTFE: -20°C ~ +180°C (-4°F~356°F) PEEK: -20'C ~ +240°C (-4°F~464°F) GRAFOIL: -20'C ~ +450°C (-4°F~842°F)
Flow Pa erns:Available in straight and angle ow pa erns
Opera on Type:T-handle as standard
Stem Op ons:V- p stem as standardNon-rota ng v- p stem for high cycle applica ons may be available
* Op onal handwheel in iron Also available in stainless steel
Materials List:
Dimensions (mm): SIZEin DN
*
SCREWED BONNET PANEL MOUNTABLE NEEDLE VALVE 6000PSI
5
8
ShanghaiRm. 1803-A, No. 678,
Gu-Bei Rd.,Shanghai, China
T +86 (21) 5777 3810F +86 (21) 5777 3819
Taiwan5F-1, No. 936,
Wen-Xin Rd., Sec. 4,Taichung City 406, Taiwan
T +886 (4) 2231 0059F +886 (4) 2236 0236
Materials List:
Dimensions (mm): SIZEin DN t max
t
Features: Panel mountableLive loaded packing system and packing nut enable easy external adjustmentLow opera on torqueV- p stem as standard, non-rota ng stem may be available upon requestCustomized op ons may be available upon request
Body Material ASTM A351 CF8M, 1.4408ASTM A216 WCB, 1.0619Barstock material available upon request
Size Range1/4" - 1" (DN8-DN25)
Pressure Ra ng6000 psig (413 bar)
End Connec onFemale thread, male threadPipe bu weld, pipe sockweldTube bu weld, tube socketweldTube ng - Lok-typeMixed end connec ons are available
Temperature Range:PTFE: -20°C ~ +180°C (-4°F~356°F) PEEK: -20'C ~ +240°C (-4°F~464°F) GRAFOIL: -20'C ~ +450°C (-4°F~842°F)
Flow Pa erns:Available in straight and angle ow pa erns
Opera on Type:T-handle as standard, handwheel op onal
Stem Op ons:V- p stem as standardNon-rota ng v- p stem for high cycle applica ons may be available
*
* Op onal handwheel in iron Also available in stainless steel
CLEAN SERVICE NEEDLE VALVES 6000PSI
6
8
ShanghaiRm. 1803-A, No. 678,
Gu-Bei Rd.,Shanghai, China
T +86 (21) 5777 3810F +86 (21) 5777 3819
Taiwan5F-1, No. 936,
Wen-Xin Rd., Sec. 4,Taichung City 406, Taiwan
T +886 (4) 2231 0059F +886 (4) 2236 0236
Materials List:
Dimensions (mm): SIZEin DN
Features: Stem threads are isolated from system uid elimina ng contamina on of external media to the stem sec onAlso available cleaned for oxygen service upon requestV- p stem as standard, non-rota ng stem may be available upon requestCustomized op ons may be available upon request
Body Material ASTM A351 CF8M, 1.4408ASTM A216 WCB, 1.0619Barstock material available upon request
Size RangeSee below
Pressure Ra ng6000 psig (413 bar)
End Connec onFemale thread, male threadPipe bu weld, pipe sockweldTube bu weld, tube socketweldTube ng - Lok-typeMixed end connec ons are available
Temperature Range:PTFE: -20°C ~ +180°C (-4°F~356°F) PEEK: -20'C ~ +240°C (-4°F~464°F) GRAFOIL: -20'C ~ +450°C (-4°F~842°F)
Flow Pa erns:Available in straight and angle ow pa erns
Opera on Type:T-handle as standard, handwheel op onal
Stem Op ons:V- p stem as standardNon-rota ng v- p stem for high cycle applica ons may be available
*
* Op onal handwheel in iron Also available in stainless steel
CLEAN SERVICE ANTI-TAMPER NEEDLE VALVE 6000PSI
7
8
ShanghaiRm. 1803-A, No. 678,
Gu-Bei Rd.,Shanghai, China
T +86 (21) 5777 3810F +86 (21) 5777 3819
Taiwan5F-1, No. 936,
Wen-Xin Rd., Sec. 4,Taichung City 406, Taiwan
T +886 (4) 2231 0059F +886 (4) 2236 0236
Materials List:
Dimensions (mm): SIZEin DN
Features: Removable handle bar e ec vely prevents unauthorized opera onStem threads are isolated from system uid elimina ng contamina on of external media to the stem sec on Live loaded packing system and packing nut enable easy external adjustmentLow opera on torqueCustomized op ons may be available upon request
Body Material ASTM A351 CF8M, 1.4408ASTM A216 WCB, 1.0619Barstock material available upon request
Size Range1/8" - 1" (DN6-DN25)
Pressure Ra ng6000 psig (413 bar)
End Connec onFemale thread, male threadPipe bu weld, pipe sockweldTube bu weld, tube socketweldTube ng - Lok-typeMixed end connec ons are available
Temperature Range:PTFE: -20°C ~ +180°C (-4°F~356°F) PEEK: -20'C ~ +240°C (-4°F~464°F) GRAFOIL: -20'C ~ +450°C (-4°F~842°F)
Flow Pa erns:Available in straight and angle ow pa erns
Opera on Type:T-handle as standard
Stem Op ons:V- p stem as standardNon-rota ng v- p stem for high cycle applica ons may be available
CRYOGENIC NEEDLE VALVE 6000PSI
1
8
ShanghaiRm. 1803-A, No. 678,
Gu-Bei Rd.,Shanghai, China
T +86 (21) 5777 3810F +86 (21) 5777 3819
Taiwan5F-1, No. 936,
Wen-Xin Rd., Sec. 4,Taichung City 406, Taiwan
T +886 (4) 2231 0059F +886 (4) 2236 0236
Copyright © 2015 by DIE ERSTE INDUSTRY CO., LTD. Series NV40 4.0 Due to continuous development of the products, dimension and information contained in the document as required without notice. For specific performance data and proper material selection, please consult with your DIE ERSTE representatives
Materials List:
Features: Extended bonnet and PCTFE packing enable lowest temperature applica onLive loaded packing system and packing nut enable easy external adjustmentV- p stem as standard, non-rota ng stem may be available upon requestCustomized op ons may be available upon request
Body Material ASTM A351 CF8M, 1.4408ASTM A216 WCB, 1.0619Barstock material available upon request
Size RangeAvailable upon request
Pressure Ra ng6000 psig (413 bar)
End Connec onFemale thread, male threadPipe bu weld, pipe sockweldTube bu weld, tube socketweldTube ng - Lok-typeMixed end connec ons are available
Temperature Range:PTFE: -20°C ~ +180°C (-4°F~356°F) PEEK: -20'C ~ +240°C (-4°F~464°F) GRAFOIL: -20'C ~ +450°C (-4°F~842°F)PCTFE: -200°C~ 180°C (-328°F~356°F)
Flow Pa erns:Available in straight and angle ow pa erns
Opera on Type:T-handle as standard
Stem Op ons:V- p stem as standardNon-rota ng v- p stem for high cycle applica ons may be available
* Op onal handwheel in iron Also available in stainless steel
*
FINE ADJUSTMENT NEEDLE VALVE 6000PSI
9
8
ShanghaiRm. 1803-A, No. 678,
Gu-Bei Rd.,Shanghai, China
T +86 (21) 5777 3810F +86 (21) 5777 3819
Taiwan5F-1, No. 936,
Wen-Xin Rd., Sec. 4,Taichung City 406, Taiwan
T +886 (4) 2231 0059F +886 (4) 2236 0236
Materials List:
Dimensions (mm): SIZEin DN
Body Material ASTM A351 CF8M, 1.4408ASTM A216 WCB, 1.0619Barstock material available upon request
Size Range1/8" - 1" (DN6-DN25)
Pressure Ra ng6000 psig (413 bar)
End Connec onFemale thread, male threadPipe bu weld, pipe sockweldTube bu weld, tube socketweldTube ng - Lok-typeMixed end connec ons are available
Temperature Range:PTFE: -20°C ~ +180°C (-4°F~356°F) PEEK: -20'C ~ +240°C (-4°F~464°F) GRAFOIL: -20'C ~ +450°C (-4°F~842°F)
Flow Pa erns:Available in straight and angle ow pa erns
Opera on Type:Round handle as standard
Stem Op ons:V- p stem as standardNon-rota ng v- p stem for high cycle applica ons may be available
SCREWED BONNET HIGH PRESSURE NEEDLE VALVE 10000PSI
10
8
ShanghaiRm. 1803-A, No. 678,
Gu-Bei Rd.,Shanghai, China
T +86 (21) 5777 3810F +86 (21) 5777 3819
Taiwan5F-1, No. 936,
Wen-Xin Rd., Sec. 4,Taichung City 406, Taiwan
T +886 (4) 2231 0059F +886 (4) 2236 0236
Features: Designed for high pressure applica onsLive loaded packing system and packing nut enable easy external adjustmentLow opera on torqueV- p stem as standard, non-rota ng stem may be available upon requestCustomized op ons may be available upon request
Body Material ASTM A351 CF8M, 1.4408ASTM A216 WCB, 1.0619Barstock material available upon request
Size Range1/8" - 1" (DN6-DN25)
Pressure Ra ng10000 psig (690 bar)
End Connec onFemale thread, male thread Pipe bu weld, pipe sockweldTube bu weld, tube socketweldTube ng - Lok-typeMixed end connec ons are available
Temperature Range:PTFE: -20°C ~ +180°C (-4°F~356°F) PEEK: -20'C ~ +240°C (-4°F~464°F) GRAFOIL: -20'C ~ +450°C (-4°F~842°F)
Flow Pa erns:Available in straight and angle ow pa erns
Opera on Type:T-handle as standard
Stem Op ons:V- p stem as standardNon-rota ng v- p stem for high cycle applica ons may be available
* Op onal handwheel in iron Also available in stainless steel
Materials List:
Dimensions (mm): SIZEin DN
*
INTEGRAL BONNET PANEL MOUNTABLE NEEDLE VALVE 10000PSI
11
8
ShanghaiRm. 1803-A, No. 678,
Gu-Bei Rd.,Shanghai, China
T +86 (21) 5777 3810F +86 (21) 5777 3819
Taiwan5F-1, No. 936,
Wen-Xin Rd., Sec. 4,Taichung City 406, Taiwan
T +886 (4) 2231 0059F +886 (4) 2236 0236
Features: Eliminates inadvertent stem back out possibilityPanel mountableLow opera on torqueLive loaded packing system and packing nut enable easy external adjustmentCustomized op on may be available upon request
Body Material ASTM A351 CF8M, 1.4408ASTM A216 WCB, 1.0619Barstock material available upon request
Size Range1/4" - 1" (DN8-DN25)
Pressure Ra ng10000 psig (690 bar)
End Connec onFemale thread, male thread Pipe bu weld, pipe sockweldTube bu weld, tube socketweldTube ng - Lok-typeMixed end connec ons are available
Temperature Range:PTFE: -20°C ~ +180°C (-4°F~356°F) PEEK: -20'C ~ +240°C (-4°F~464°F) GRAFOIL: -20'C ~ +450°C (-4°F~842°F)PCTFE: -200°C~ 180°C (-328°F~356°F)
Flow Pa erns:Available in straight and angle ow pa erns
Opera on Type:T-handle as standard, handwheel op onal
Stem Op ons:V- p stem as standardNon-rota ng v- p stem for high cycle applica ons may be available
Materials List:
t
Dimensions (mm): SIZEin DN t max
*
* Op onal handwheel in iron Also available in stainless steel
BLOCK AND BLEED HIGH PRESSURE GAUGE VALVE / MULTI-PORT GAUGE VALVE 10000PSI
12
8
ShanghaiRm. 1803-A, No. 678,
Gu-Bei Rd.,Shanghai, China
T +86 (21) 5777 3810F +86 (21) 5777 3819
Taiwan5F-1, No. 936,
Wen-Xin Rd., Sec. 4,Taichung City 406, Taiwan
T +886 (4) 2231 0059F +886 (4) 2236 0236
Dimensions (mm):
Materials List:
Features: Designed for moun ng to pressure gauges, transmi ers and switchesConnec ons, materials, valve head unit designs and further op ons availableLive loaded packing system and packing nut enable easy external adjustmentLow opera on torqueV- p stem as standard, non-rota ng stem may be available upon requestCustomized op ons may be available upon request
Body Material ASTM A276 Gr. 316
Size RangeSee below
Pressure Ra ng10000 psig (690 bar)
End Connec onFemale thread, male thread Pipe bu weld, pipe sockweldTube bu weld, tube socketweldTube ng - Lok-typeMixed end connec ons are available
Temperature Range:PTFE: -20°C ~ +180°C (-4°F~356°F) PEEK: -20'C ~ +240°C (-4°F~464°F) GRAFOIL: -20'C ~ +450°C (-4°F~842°F)
Opera on Type:T-handle as standard
Stem Op ons:V- p stem as standardNon-rota ng v- p stem for high cycle applica ons may be available
Bleed valve sold separately
BLEED VALVE 10000PSI
13
8
ShanghaiRm. 1803-A, No. 678,
Gu-Bei Rd.,Shanghai, China
T +86 (21) 5777 3810F +86 (21) 5777 3819
Taiwan5F-1, No. 936,
Wen-Xin Rd., Sec. 4,Taichung City 406, Taiwan
T +886 (4) 2231 0059F +886 (4) 2236 0236
Materials List
Dimensions (mm): SIZEin DN
Features: Working pressures up to 10000 psig (689 bar)Compact for convenient installa onConveniently used on instrumenta on devices such as manifolds or gauge valvesVent tube directs excess liquid or gas from system lines
Body Material ASTM A351 CF8M, 1.4408
Size Range1/4" - 1/2" (DN8-DN15)
Pressure Ra ng10000 psig (690 bar)
End Connec onFemale thread, male thread, female x male thread Pipe bu weld, pipe sockweldTube bu weld, tube socketweldTube ng - Lok-typeMixed end connec ons are available
Temperature Range:PTFE: -20°C ~ +180°C (-4°F~356°F) PEEK: -20'C ~ +240°C (-4°F~464°F) GRAFOIL: -20'C ~ +450°C (-4°F~842°F)
Opera on Type:T-handle as standard
Stem Op ons:V- p stem as standardNon-rota ng v- p stem for high cycle applica ons may be available
