Pneumatic Spares Syndicate, Kolkata, Mining Equipments & Spares
Nurse Call Systems Spares Catalogue€¦ · Nurse Call Systems Spares Catalogue. ... Single Blue...
Transcript of Nurse Call Systems Spares Catalogue€¦ · Nurse Call Systems Spares Catalogue. ... Single Blue...
Nurse Call Systems Spares Catalogue
Component Parts
Front Plate Switch Assemblies: Part Number(s) Emergency Switch Assembly 33806 + 36133 + 36183 + 36191 + 37101 Reset Switch Assembly 36192 Hand Unit Data Socket Assembly 36193 Nurse Presence Switch Assembly 36194 Nurse Call Push Switch Assembly 36195 Tone Hi/Lo Switch Assembly 36197
MK6 Hand Unit Components: Part Number(s)MK6 Hand Unit Cable with linen clip & plug 42942
MK5 Hand Unit Components: Part Number(s) MK5 Handset Bracket 37103 Rear Rubber Foot (small) with adhesive 36544B Rear Rubber Foot (large) with adhesive 36545B Replacement Lead – 2 metres c/w connectors 42901B & linen clip Top Moulding c/w overlay & rubber feet 42908 Bottom Moulding c/w screws & rubber feet 42910B Rear Cover c/w screws 42911B Printed Circuit Board 46793 Patient User Instruction Leaflet 90123
Bedhead Modules: Part Number(s) Codem I Decoder (SM888) 46725 Speech Decoder (SM889) 46726 I2C Driver (SM844) 46747 Stereo Headphone socket (SM849) 46748 Speech Decoder + IR (SM852) 46751 Micro Bedhead Backplane (No I/0) (SS861) 46760 Bedhead Electronics (SM865) 46764 Codem I Decoder (SM838) 46797 Bedhead Backplane (SS860) 46798
Bedlight Relay Fittings: Part Number(s) Bedlight Relay Housing Mounting PinClips 36123 Bedlight Relay (Std) (SM867) 46706 Bedlight Relay (C/O) (SM868) 46707 Bedlight Relay (Std) Plastic Housing 40011 Bedlight Relay (C/O) Plastic Housing 40012
Indicator Modules: Part Number(s) 8 Zone Indicator Backplane (SM828) 42816 8 Zone Indicator Module (SM829) 46817 Datastation I/F Node (SM874) 46737 LCD Indicator Module (SM880) 46768 Touchscreen Display Module (SM933) 46788
Spares Catalogue Issue : 5f (11/14) Page 2 of 62
Component Parts
Ancillary Modules: Part Number(s) Micro Node Backplate (SS875) 46743 Micro Node I01 (sm876) 46744 RDR Interface Module (SM848) 46746 Ancillary I/O Electronics (SM862) 46761 Ancillary I/O Electronics + tone (SM8630 46762 Micro Node IO2 (SM835 + SM819) 46781
Pull Cord Assemblies: Part Number(s) Orange Cord 36447 Pull 36372 Connector 36175
Overdoor Unit Lamp Assemblies: Part Number(s) Single White 46728 – pcb module only Single Blue 46729 – pcb module only Single Red 46734 – pcb module only Single Green 46749 – pcb module only Single Amber (systems prior to 06/03) 46757 – pcb module only Single Orange (systems post 06/03) 46778 – pcb module only
Power Supplies: Part Number(s) 3A SMPSU 75046 6A SMPSU 75059 6A SMPSU Charger Module 79012 10A SMPSU Charger Module 79013 7AH Battery 42811 12AH Battery 42856 17AH Battery 42815
Power Supply Unit Modules: Part Number(s) CNX/Termination Module (SS871) 46703 Network Link Node (SM837) 46708 (Older – non network speech)
46799 (Newer – network speech) System Back-up Node (SM866) 46750 Network Speech Backplane (SM817) 46783 Network Speech Module (SM818) 46784
Leads: Part Number(s) RS232 Null Modem Lead 42263 Datastation I/F Lead 42512 CAT5 Patch Lead 42904
Line Terminators: Part Number(s) CAT5 Terminator Module 46723 Codem 1 Terminator Module 75614
Spares Catalogue Issue : 5f (11/14) Page 3 of 62
Component Parts
Repeater Unit Modules: Part Number(s) Line Repeater (SM864) 46763
Relay Modules: Part Number(s) Twin 5V Relay Module (SS762) 46735
Attack Alarm Batteries: Part Number(s) Badge Battery (Type CR2430) 74621 Pendant Battery (Type CR 2032) 74626
To assist with ordering complete units an identification label can be found on the inside of the equipment front plate.
For further assistance contact Static Systems’ Technical Services Department on +44 (0) 1902 895551.
Spares Catalogue Issue : 5f (11/14) Page 4 of 62
Component Parts
Recommended Spares List – Typical 30 Bed Ward
Product Description Part Number Recommended Quantity
Emergency Switch Assembly *36133, 36183, 36191 3 Reset Switch Assembly *36192 3 Hand Unit Data Socket Assembly *36193 2 Headphones 42043 4 6A Power Supply Unit 75059 1 Patient Hand Unit 75709B 4 Dummy Jack Plug 75717 2 Overdoor Lamp Unit *75776B 2 Pull Cord Unit *75738 2
Items marked with an * have proven to be particularly reliable in operation and do not require changing often.
Spares Catalogue Issue : 5f (11/14) Page 5 of 62
Recommended Spares List
Hand Unit Warranty
MK6 hand units are supplied with a 5 year warranty, and all other hand units are supplied with a 12 month warranty.
Faulty hand units returned within the warranty period will be replaced with a new unit on a no charge basis.
A new hand unit (with warranty) will be provided for all faulty units returned under the Service Replacement Scheme.
Hand units returned ‘damaged’ will be replaced at the standard unit cost.
Where a specific request is made to replace a MK4 or MK5 unit with a MK6 unit the standard unit price will be charged.
Note: Where a MK5 unit is replaced with a MK6 unit it will be necessary to also change the mounting bracket. The appropriate bracket is automatically supplied with the hand unit. The amount charged does not include for fitting.
Spares Ordering
Items of equipment should be ordered direct from Static Systems’ Spares Department on:
Tel: +44 (0) 1902 891035 Fax:: +44 (0) 1902 891083
Postage and Packaging
Replacement hand units will be posted using a standard carrier service for which there is no additional charge. A next working day service for a 9.30am delivery can be provided at an extra cost of £26.50
On-site repair by customer
MK5 hand unit components and cables are available for repair by qualified hospital personnel.
Only the cable on MK6 hand units can be purchased separately for on-site repair by qualified hospital personnel.
Spares Catalogue Issue : 5f (11/14) Page 6 of 62
Hand Unit Warranty
Codemlon Staff Hand Unit - speech (MK6)
Part Code: 75824B
Facilities: • Microphone• Speaker• LED Torch Facility• Patented Quick Release Plug• 2 Metre Flexible Cable
I.P. Rating: IP64-Splashproof. To assist in the fight against bacteria such as MRSA, the unit can be wiped clean with a disinfecting wipe.
Note: This hand unit is for use with nurse base speech indicators and speech datastations.
Spares Catalogue Issue : 5f (11/14) Page 7 of 62
Staff Hand Units
Codemlon Mini Patient Hand Unit - lighting
Part Code: 75801B
Facilities: • Reassurance LED• Patient Call Push• Lighting Controls• LED Torch Facility• Linen Clip• Patented Quick Release Plug• 2 Metre Flexible Cable
I.P. Rating: IP67-Waterproof. To assist in the fight against bacteria such as MRSA, the unit can be submerged in a suitable hypochlorite disinfecting solution or wiped clean with a disinfecting wipe.
Lighting Control: The unit includes on/off functionality for the control of bed lighting. The bedlight control buttons can be programmed to allow variable dimming where appropriate electronics are provided in the lighting unit.
Maintenance: The unit has been purpose designed to allow easy replacement of the cable.
Codemlon Patient Hand Unit - speech, entertainment & lighting
Part Code: 75802B
Facilities: • Microphone• Speaker• Reassurance LED• Patient Call Push• Entertainment Channel Selection• Volume Control• Lighting Controls• LED Torch Facility• Linen Clip• Patented Quick Release Plug• 2 Metre Flexible Cable
I.P. Rating: IP64-Splashproof. To assist in the fight against bacteria such as MRSA, the unit can be wiped clean with a disinfecting wipe.
Lighting Control: The hand unit includes on/off functionality for the control of bed lighting. The bedlight control buttons can be programmed to allow variable dimming where appropriate electronics are provided in the lighting unit.
Maintenance: The unit has been purpose designed to allow easy replacement of the cable.
Spares Catalogue Issue : 5f (11/14) Page 8 of 62
Patient Hand Units
Codemlon Patient Hand Unit - entertainment & lighting
Part Code: 75803B
Facilities: • Reassurance LED• Patient Call Push• Channel Selection• Volume Control• Lighting Controls• LED Torch Facility• Linen Clip• Patented Quick Release Plug• 2 Metre Flexible Cable
I.P. Rating: IP67-Waterproof. To assist in the fight against bacteria such as MRSA, the unit can be submerged in a suitable hypochlorite disinfecting solution or wiped clean with a disinfecting wipe.
Lighting Control: The unit includes on/off functionality for the control of bed lighting. The bedlight control buttons can be programmed to allow variable dimming where appropriate electronics are provided in the lighting unit.
Maintenance: The unit has been purpose designed to allow easy replacement of the cable.
Codemlon Patient Hand Unit - speech, entertainment, lighting & catering
Part Code: 75819B
Facilities: • Microphone• Speaker• Reassurance LED• Patient Call Push• Entertainment Channel Selection• Volume Control• Lighting Controls• Catering Call Push• LED Torch Facility• Linen Clip• Patented Quick Release Plug• 2 Metre Flexible Cable
I.P. Rating: IP64-Splashproof. To assist in the fight against bacteria such as MRSA, the unit can be wiped clean with a disinfecting wipe.
Lighting Control: The hand unit includes on/off functionality for the control of bed lighting. The bedlight control buttons can be programmed to allow variable dimming where appropriate electronics are provided in the lighting unit.
Maintenance: The unit has been purpose designed to allow easy replacement of the cable.
Spares Catalogue Issue : 5f (11/14) Page 9 of 62
Patient Hand Units
Codemlon Patient Hand Unit - entertainment, lighting & catering
Part Code: 75820B
Facilities: • Reassurance LED• Patient Call Push• Entertainment Channel Selection• Volume Control• Lighting Controls• Catering Call Push• LED Torch Facility• Linen Clip• Patented Quick Release Plug• 2 Metre Flexible Cable
I.P. Rating: IP67-Waterproof. To assist in the fight against bacteria such as MRSA, the unit can be submerged in a suitable hypochlorite disinfecting solution or wiped clean with a disinfecting wipe.
Lighting Control: The hand unit includes on/off functionality for the control of bed lighting. The bedlight control buttons can be programmed to allow variable dimming where appropriate electronics are provided in the lighting unit.
Maintenance: The unit has been purpose designed to allow easy replacement of the cable.
Codemlon Mini Patient Hand Unit - lighting & catering
Part Code: 75821B
Facilities: • Reassurance LED• Patient Call Push• Lighting Control• Catering Call Push• LED Torch Facility• Linen Clip• Patented Quick Release Plug• 2 Metre Flexible Cable
I.P. Rating: IP67-Waterproof. To assist in the fight against bacteria such as MRSA, the unit can be submerged in a suitable hypochlorite disinfecting solution or wiped clean with a disinfecting wipe.
Lighting Control: The unit includes on/off functionality for the control of bed lighting. The bedlight control button can be programmed to allow variable dimming where appropriate electronics are provided in the lighting unit.
Maintenance: The unit has been purpose designed to allow easy replacement of the cable.
Spares Catalogue Issue : 5f (11/14) Page 10 of 62
Patient Hand Units
Codemlon Patient Hand Unit - lighting & catering
Part Code: 75822B
Facilities: • Reassurance LED• Patient Call Push• Lighting Controls• Catering Call Push• LED Torch Facility• Linen Clip• Patented Quick Release Plug• 2 Metre Flexible Cable
I.P. Rating: IP67-Waterproof. To assist in the fight against bacteria such as MRSA, the unit can be submerged in a suitable hypochlorite disinfecting solution or wiped clean with a disinfecting wipe.
Lighting Control: The unit includes on/off functionality for the control of bed lighting. The bedlight control buttons can be programmed to allow variable dimming where appropriate electronics are provided in the lighting unit.
Maintenance: The unit has been purpose designed to allow easy replacement of the cable.
Codemlon Patient Hand Unit - speech & lighting
Part Code: 75823B
Facilities: • Microphone• Speaker• Reassurance LED• Patient Call Push• Lighting Controls• LED Torch Facility• Linen Clip• Patented Quick Release Plug• 2 Metre Flexible Cable
I.P. Rating: IP64-Splashproof. To assist in the fight against bacteria such as MRSA, the unit can be wiped clean with a disinfecting wipe.
Lighting Control: The hand unit includes on/off functionality for the control of bed lighting. The bedlight control buttons can be programmed to allow variable dimming where appropriate electronics are provided in the lighting unit.
Maintenance: The unit has been purpose designed to allow easy replacement of the cable.
Spares Catalogue Issue : 5f (11/14) Page 11 of 62
Patient Hand Units
Codemlon Patient Hand Unit - TV entertainment & lighting
Part Code: 75831B
Facilities: • Reassurance LED• Patient Call Push• Entertainment Channel Selection• Volume Control• Lighting Control• Programme Scheduling/Information• Entertainment "on/off"• TV/Radio Selection• LED Torch Facility• Linen Clip• Patented Quick Release Plug• 2 Metre Flexible Cable
I.P. Rating: IP67-Waterproof. To assist in the fight against bacteria such as MRSA, the unit can be submerged in a suitable hypochlorite disinfecting solution or wiped clean with a disinfecting wipe.
Lighting Control: The unit includes on/off functionality for the control of bed lighting. The bedlight control button can be programmed to allow variable dimming where appropriate electronics are provided in the lighting unit.
Maintenance: The unit has been purpose designed to allow easy replacement of the cable.
Spares Catalogue Issue : 5f (11/14) Page 12 of 62
Patient Hand Units
Codemlon Patient Hand Unit - speech, TV entertainment & lighting
Part Code: 75832B
Facilities: • Microphone• Speaker• Reassurance LED• Patient Call Push• Entertainment Channel Selection• Volume Control• Lighting Control• Programme Scheduling/Information• Entertainment "on/off"• TV/Radio Selection• LED Torch Facility• Linen Clip• Patented Quick Release Plug• 2 Metre Flexible Cable
I.P. Rating: IP64-Splashproof. To assist in the fight against bacteria such as MRSA, the unit can be wiped clean with a disinfecting wipe.
Lighting Control: The hand unit includes on/off functionality for the control of bed lighting. The bedlight control button can be programmed to allow variable dimming where appropriate electronics are provided in the lighting unit.
Maintenance: The unit has been purpose designed to allow easy replacement of the cable.
Spares Catalogue Issue : 5f (11/14) Page 13 of 62
Patient Hand Units
Codemlon Patient Hand Unit - TV entertainment, lighting & catering
Part Code: 75834B
Facilities: • Reassurance LED• Patient Call Push• Entertainment Channel Selection• Volume Control• Lighting Control• Catering Call Push• Programme Scheduling/Information• TV/Radio Selection• LED Torch Facility• Linen Clip• Patented Quick Release Plug• 2 Metre Flexible Cable
I.P. Rating: IP67-Waterproof. To assist in the fight against bacteria such as MRSA, the unit can be submerged in a suitable hypochlorite disinfecting solution or wiped clean with a disinfecting wipe.
Lighting Control: The hand unit includes on/off functionality for the control of bed lighting. The bedlight control button can be programmed to allow variable dimming where appropriate electronics are provided in the lighting unit.
Maintenance: The unit has been purpose designed to allow easy replacement of the cable.
Spares Catalogue Issue : 5f (11/14) Page 14 of 62
Patient Hand Units
Codemlon Patient Hand Unit - speech, TV entertainment, lighting & catering
Part Code: 75835B
Facilities: • Microphone• Speaker• Reassurance LED• Patient Call Push• Entertainment Channel Selection• Volume Control• Lighting Control• Catering Call Push• Programme Scheduling/Information• TV/Radio Selection• LED Torch Facility• Linen Clip• Patented Quick Release Plug• 2 Metre Flexible Cable
I.P. Rating: IP64-Splashproof. To assist in the fight against bacteria such as MRSA, the unit can be wiped clean with a disinfecting wipe.
Lighting Control: The hand unit includes on/off functionality for the control of bed lighting. The bedlight control button can be programmed to allow variable dimming where appropriate electronics are provided in the lighting unit.
Maintenance: The unit has been purpose designed to allow easy replacement of the cable.
Spares Catalogue Issue : 5f (11/14) Page 15 of 62
Patient Hand Units
Codemlon Patient Hand Unit (MK5)
Part Code: 75727B
Facilities: • Reassurance LED• Patient Call Push• Channel Selection• Volume Control• Lighting Controls• Linen Clip• Patented Quick Release Plug• 2 Metre Flexible Cable• Patient User Instructions
I.P. Rating IPX7. To assist in the fight against bacteria such as MRSA, the unit can be submerged in a suitable hypochlorite disinfecting solution or wiped clean with a disinfecting wipe.
Lighting Control: The hand unit includes on/off buttons for the control of two separate lighting units. The buttons can also be programmed to allow variable dimming where appropriate electronics are provided in the light unit.
Maintenance: The hand unit has been purpose designed to be fully maintainable on site.
Spares Catalogue Issue : 5f (11/14) Page 16 of 62
Patient Hand Units
Codemlon Patient Hand Unit (MK5)
Part Code: 75784B
Facilities: • Reassurance LED• Patient Call Push• Channel Selection• Volume Control• Lighting Controls• Linen Clip• Patented Quick Release Plug• 2 Metre Flexible Cable
I.P. Rating: IPX7. To assist in the fight against bacteria such as MRSA, the unit can be submerged in a suitable hypochlorite disinfecting solution or wiped clean with a disinfecting wipe.
Lighting Control: The unit includes and on/off button for the control of a lighting unit. The button can also be programmed to allow variable dimming where appropriate electronics are provided in the lighting unit.
Maintenance: The hand unit has been purpose designed to be fully maintainable on site.
Codemlon Patient Hand Unit (MK5)
Part Code: 75794B
Facilities: • Reassurance LED• Patient Call Push• Channel Selection• Volume Control• Lighting Controls• Linen Clip• Patented Quick Release Plug• 2 Metre Flexible Cable• Patient User Instructions
I.P. Rating: IPX7. To assist in the fight against bacteria such as MRSA, the unit can be submerged in a suitable hypochlorite disinfecting solution or wiped clean with a disinfecting wipe.
Lighting Control: The hand unit includes an on/off button for the control of a lighting unit. The button can also be programmed to allow variable dimming where appropriate electronic are provided in the lighting unit.
Maintenance: The hand unit has been purpose designed to be fully maintainable on site.
Spares Catalogue Issue : 5f (11/14) Page 17 of 62
Patient Hand Units
Codemlon Mini Patient Hand Unit (MK4)
Part Code: 75719B
Facilities: • Reassurance LED• Patient Call Push• Linen Clip• Patented Quick Release Plug• 2 Metre Flexible Cable
I.P. Rating: IPX7. To assist in the fight against bacteria such as MRSA, the unit can be submerged in a suitable hypochlorite disinfecting solution or wiped clean with an alcohol wipe.
Codemlon Mini Patient Hand Unit with lighting control button (MK4)
Part Code: 75737B
Facilities: • Reassurance LED• Patient Call Push• Lighting Control• Linen Clip• Patented Quick Release Plug• 2 Metre Flexible Cable
I.P. Rating: IPX7. To assist in the fight against bacteria such as MRSA, the unit can be submerged in a suitable hypochlorite disinfecting solution or wiped clean with a disinfecting wipe.
Lighting Control: The hand unit includes an off/off button for the control of a lighting unit. The bedlight control button can be programmed to allow variable dimming where appropriate electronics are provided in the lighting unit.
Spares Catalogue Issue : 5f (11/14) Page 18 of 62
Patient Hand Units
Codemlon Patient Hand Unit – speech (MK4)
Part Code: 75715B
Facilities: • Microphone• Speaker• Reassurance LED• Patient Call Push• Lighting Control• Linen Clip• Patented Quick Release Plug• 2 Metre Flexible Cable
I.P. Rating: IP64-Splashproof (To assist in the fight against bacteria such as MRSA, the unit can be wiped clean with a disinfecting wipe).
Lighting Control: The hand unit includes an off/off button for the control of a lighting unit. The bedlight control button can be programmed to allow variable dimming where appropriate electronics are provided in the lighting unit.
Codemlon Patient Hand Unit - speech with entertainment (MK4)
Part Code: 75754B
Facilities: • Microphone• Speaker• Reassurance LED• Patient Call Push• Entertainment Channel Selection• Volume Control• Lighting Control• Linen Clip• Patented Quick Release Plug• 2 Metre Flexible Cable
I.P. Rating: IPX7. To assist in the fight against bacteria such as MRSA, the unit can be submerged in a suitable hypochlorite disinfecting solution or wiped clean with a disinfecting wipe.
Lighting Control: The hand unit includes an off/off button for the control of a lighting unit. The bedlight control button can be programmed to allow variable dimming where appropriate electronics are provided in the lighting unit.
Spares Catalogue Issue : 5f (11/14) Page 19 of 62
Patient Hand Units
Codemlon Staff Hand Unit - speech (MK4)
Part Code: 75773B
Facilities: • Microphone• Speaker• Patented Quick Release Plug• 2 Metre Flexible Cable
I.P. Rating: IPX7. To assist in the fight against bacteria such as MRSA, the unit can be submerged in a suitable hypochlorite disinfecting solution or wiped clean with a disinfecting wipe.
Note: This hand unit is for use with nurse base speech indicators and speech datastations.
Spares Catalogue Issue : 5f (11/14) Page 20 of 62
Staff Hand Units
Codemlon Dummy Jack Plug
Part Code: 75800B
Note: This device is used to plug into the hand unit socket to prevent the nurse call system going into alarm when a patient hand unit is removed.
Hand Unit Mounting Bracket
Part Code: 37103B
Note: This bracket is for use with Codem II and Codemlon MKV Hand Units. (Supplied as a separate item for fixing by others.)
Hand Unit Mounting Bracket
Part Code: 37140B
Note: This bracket is for use with Codemlon MK6 Hand Units. (Supplied as a separate item for fixing by others.)
Spares Catalogue Issue : 5f (11/14) Page 21 of 62
Hand Units – Miscellaneous
Codemlon Bedhead Unit without entertainment
Part Code: 75705B
Facilities: • Panel Mounted Spur Fuse rated at 3 Amps forBedlight
• 5 Amp 3 Position Switch for Dim/Off/BrightOperation
• Twin Switched Socket Outlet (Crabtree)• Hand Unit Mounting Bracket• Reset Push• Emergency Pull• Hand Unit Socket
Plate Size: 174mm x 324mm (including Mains Section)
Box Size: Flush – 300mm x 150mm x 50mm (Part No. 39130) Surface – 325mm x 175mm x 50mm (Part No. 39342)
Material: 16swg Zintec Steel
Finish: Powder Coated Papyrus White RAL 9018
Note: This unit includes a jack socket to allow for the future addition of Radio/TV audio facilities. Additional wiring and modules would be required.
Spares Catalogue Issue : 5f (11/14) Page 22 of 62
Bedhead Units
Codemlon Bedhead Unit with Codem entertainment
Part Code: 75729B
Facilities: • Panel Mounted Spur Fuse rated at 3 Amps forBedlight
• 5 Amp 3 Position Switch for Dim/Off/BrightOperation
• Twin Switched Socket Outlet (Crabtree)• Hand Unit Mounting Bracket• Headphone Jack Socket• Reset Push• Emergency Pull• Hand Unit Socket• Codem Radio/TV Audio Module
Plate Size: 174mm x 324mm (including Mains Section)
Box Size: Flush - 300mm x 150xmm x 50mm (Part No. 39130)
Surface – 325mm x 175mm x 50mm (Part No. 39342)
Material: 16swg Zintec Steel
Finish: Powder Coated Papyrus White RAL 9018
Spares Catalogue Issue : 5f (11/14) Page 23 of 62
Bedhead Units
Codemlon Bedhead Unit with speech and Codem entertainment
Part Code: 75764B
Facilities: • Panel Mounted Spur Fuse rated at 3 Amps forBedlight
• 5 Amp 3 Position Switch for Dim/Off/BrightOperation
• Twin Switched Socket Outlet (Crabtree)• Microphone• Speaker• Hand Unit Mounting Bracket• Headphone Jack Socket• Reset Push• Emergency Pull• Hand Unit Socket• Two-way Speech Module• Codem Radio/TV Audio Module
Plate Size: 174mm x 424mm (including Mains Section)
Box Size: Flush – 400mm x 150mm x 50mm (Part No. 39129) Surface – 425mm x 175mm x 50mm (Part No. 39341)
Material: 16swg Zintec Steel
Finish: Powder Coated Papyrus White RAL 9018
Spares Catalogue Issue : 5f (11/14) Page 24 of 62
Bedhead Units
Codemlon Bedhead Unit with speech
Part Code: 75765B
Facilities: • Panel Mounted Spur Fuse rated at 3 Amps forBedlight
• 5 Amp 3 Position Switch for Dim/Off/BrightOperation
• Twin Switched Socket Outlet (Crabtree)• Microphone• Speaker• Hand Unit Mounting Bracket• Reset Push• Emergency Pull• Hand Unit Socket• Two-way Speech Module
Plate Size: 174mm x 424mm (including Mains Section)
Box Size: Flush – 400mm x 150mm x 50mm (Part No. 39129) Surface – 425mm x 175mm x 50mm (Part No. 39341)
Material: 16swg Zintec Steel
Finish: Powder Coated Papyrus White RAL 9018
Note: This unit includes a jack socket to allow for the future addition of Radio/TV audio facilities. Additional wiring and modules would be required.
Bedlight Relay with bracket
Part Code: 42700
Note: This unit must be located within 500mm of the nurse call panel.
Spares Catalogue Issue : 5f (11/14) Page 25 of 62
Bedhead Units
Codemlon Pull Cord Unit with reassurance
Part Code: 75738B
Facilities: • Reassurance LED• 2 Metre Cord (orange)• Pull Handle (orange)
Plate Size: 86mm x 86mm
Box Size: Flush (Ceiling Mounted) – BS 1 Gang (Part No. 39100) Surface (Ceiling Mounted) – 96mm x 85mm x 30mm (Part No. 39322)
Material: ABS Plastic
Finish: Fine spark textured Neutral Grey
Codemlon Pull Cord Unit with reassurance
Part Code: 75795B
Facilities: • Reassurance LED• 3 Metre Cord (red)• 2 Pull Handles (red)
Plate Size: 86mm x 86mm
Box Size: Flush – BS 1 Gang (Part No. 39100) Surface – 96mm x 85mm x 30mm (Part No. 39322)
Material: ABS Plastic
Finish: Fine spark textured Neutral Grey
Note: This unit is designed to comply with BS 8300 : 2001 (Section 12.4.10) for use in public access WCs. It is supplied with 3 metres of cord for easy adjustment on site.
Spares Catalogue Issue : 5f (11/14) Page 26 of 62
Pull Cords
Codemlon Call Push Unit
Part Code: 75722B
Facilities: • Call Push
Plate Size: 86mm x 86mm
Box Size: Flush – BS 1 Gang (Part No. 39100) Surface – 86mm x 86mm x 40mm (Part No. 39300)
Material: 16swg Zintec Steel
Finish: Powder Coated Papyrus White RAL 9018
Codemlon Call/Reassurance Unit
Part Code: 75723B
Facilities: • Call Push
Plate Size: 86mm x 86mm
Box Size: Flush – BS 1 Gang (Part No. 39100) Surface – 86mm x 86mm x 40mm (Part No. 39300)
Material: 16swg Zintec Steel
Finish: Powder Coated Papyrus White RAL 9018
Codemlon Call/Reset/Emergency Unit
Part Code: 75721B
Facilities: • Reset Push• Emergency Pull
Call Push
Plate Size: 174mm x 99mm
Box Size: Flush – 150mm x 75mm x 50mm (Part No. 39105) Surface – 175mm x 100mm x 50mm (Part No. 39305B)
Material: 16swg Zintec Steel
Finish: Powder Coated Papyrus White RAL 9018
Spares Catalogue Issue : 5f (11/14) Page 27 of 62
Ancillary Call Units
Codemlon Hand Unit Socket
Part Code: 75731B
Facilities: • Hand Unit Socket
Plate Size: 86mm x 86mm
Box Size: Flush – BS 1 Gang (Part No. 39100) Surface – 86mm x 86mm x 40mm (Part No. 39300)
Material: 16swg Zintec Steel
Finish: Powder Coated Papyrus White RAL 9018
Spares Catalogue Issue : 5f (11/14) Page 28 of 62
Ancillary Call Units
Codemlon Emergency/Reassurance Unit
Part Code: 75739B
Facilities: • Reassurance LED• Emergency Pull
Plate Size: 166mm x 91mm
Box Size: Flush – 150mm x 75mm x 50mm (Part No. 39125) Surface – 168mm x 93mm x 50mm (Part No. 39339)
Material: 16swg Zintec Steel
Finish: Powder Coated Papyrus White RAL 9018
Codemlon Reset/Emergency/Socket Unit
Part Code: 75740B
Facilities: • Reset Push• Emergency Pull• Hand Unit Socket
Plate Size: 166mm x 91mm
Box Size: Flush – 150mm x 75mm x 50mm (Part No. 39125) Surface – 168mm x 93mm x 50mm (Part No. 39339)
Material: 16swg Zintec Steel
Finish: Powder Coated Papyrus White RAL 9018
Codemlon Reset/Socket Unit
Part Code: 75741B
Facilities: • Reset Push• Hand Unit Socket
Plate Size: 166mm x 91mm
Box Size: Flush – 150 mm x 75mm x 50mm (Part No. 39125) Surface – 168 mm x 93mm x 50mm (Part No. 39339)
Material: 16swg Zintec Steel
Finish: Powder Coated Papyrus White RAL 9018
Codemlon Call/Reset Unit
Spares Catalogue Issue : 5f (11/14) Page 29 of 62
Ancillary Call Units
Part Code: 75742B
Facilities: • Reset Push• Call Push
Plate Size: 166mm x 91mm
Box Size: Flush – 150mm x 75mm x 50mm (Part No. 39125) Surface – 168mm x 93mm x 50mm (Part No. 39339)
Material: 16swg Zintec Steel
Finish: Powder Coated Papyrus White RAL 9018
Codemlon Reset/Emergency Unit
Part Code: 75743B
Facilities: • Reset Push• Emergency Pull
Plate Size: 166mm x 91mm
Box Size: Flush – 150 mm x 75 mm x 50mm (Part No. 39125) Surface – 168 mm x 93 mm x 50mm (Part No. 39339)
Material: 16swg Zintec Steel
Finish: Powder Coated Papyrus White RAL 9018
Codemlon Reset Unit
Part Code: 75744B
Facilities: • Reset Push
Plate Size: 166mm x 91mm
Box Size: Flush – 150mm x 75mm x 50mm (Part No. 39125) Surface – 168mm x 93mm x 50mm (Part No. 39339)
Material: 16swg Zintec Steel
Finish: Powder Coated Papyrus White RAL 9018
Spares Catalogue Issue : 5f (11/14) Page 30 of 62
Ancillary Call Units
Codemlon Call/Reset/Emergency Unit
Part Code: 75745B
Facilities: • Reset Push• Emergency Pull• Call Push
Plate Size: 166mm x 91mm
Box Size: Flush – 150mm x 75mm x 50mm (Part No. 39125) Surface – 168mm x 93mm x 50mm (Part No. 39339)
Material: 16swg Zintec Steel
Finish: Powder Coated Papyrus White RAL 9018
Spares Catalogue Issue : 5f (11/14) Page 31 of 62
Ancillary Call Units
Codemlon Reset Unit
Part Code: 75710B
Facilities: • Reset Push
Plate Size: 146mm x 86mm
Box Size: Flush – 2 Gang (Part No. 39101) Surface – 2 Gang (Part No. 39301B)
Material: 16swg Zintec Steel
Finish: Powder Coated Papyrus White RAL 9018
Codemlon Reset/Emergency Unit
Part Code: 75711B
Facilities: • Reset Push• Emergency Pull
Plate Size: 146mm x 86mm
Box Size: Flush – 2 Gang (Part No. 39101) Surface – 2 Gang (Part No. 39301B)
Material: 16swg Zintec Steel
Finish: Powder Coated Papyrus White RAL 9018
Codemlon Reset/Socket Unit
Part Code: 75712B
Facilities: • Reset Push• Hand Unit Socket
Plate Size: 146mm x 86mm
Box Size: Flush – 2 Gang (Part No. 39101) Surface – 2 Gang (Part No. 39301B)
Material: 16swg Zintec Steel
Finish: Powder Coated Papyrus White RAL 9018
Spares Catalogue Issue : 5f (11/14) Page 32 of 62
Ancillary Call Units (without nodes)
Codemlon Reset/Emergency/Socket Unit
Part Code: 75713B
Facilities: • Reset Push• Emergency Pull• Hand Unit Socket
Plate Size: 174mm x 99mm
Box Size: Flush – 150mm x 75mm x 50mm (Part No. 39105) Surface – 175mm x 100mm x 50mm (Part No. 39305B)
Material: 16swg Zintec Steel
Finish: Powder Coated Papyrus White RAL 9018
Codemlon Call/Reset Unit
Part Code: 75720B
Facilities: • Reset Push• Call Push
Plate Size: 146mm x 86mm
Box Size: Flush – 2 Gang (Part No. 39101) Surface – 2 Gang (Part No. 39301B)
Material: 16swg Zintec Steel
Finish: Powder Coated Papyrus White RAL 9018
Codemlon Emergency/Reassurance Unit
Part Code: 75730B
Facilities: • Reassurance LED• Emergency Pull
Plate Size: 146mm x 86mm
Box Size: Flush – 2 Gang (Part No. 39101) Surface – 2 Gang (Part No. 39301B)
Material: 16swg Zintec Steel
Finish: Powder Coated Papyrus White RAL 9018
Spares Catalogue Issue : 5f (11/14) Page 33 of 62
Ancillary Call Units (without nodes)
Codemlon LED Indicator Panel
Part Code: 75701
Facilities: • 8 no. zone indicators (red)• 8 no. ‘write-on’ zone labels• Power indicator (green)• Fault indicator (yellow)• Mute indicator (red)• Concealed tone sounder• Wipe-clean front plate
Controls: • Mute button for day/night operation
Plate Size: 249mm x 174mm
Box Size: Flush – 225mm x 150mm x 50mm (Part No. 39177) Surface – 250mm x 175mm x 50mm (Part No. 39389)
Box Material: 16swg Zintec Steel
Box Finish: Powder Coated Papyrus White RAL 9018
Codemlon LCD Indicator with tones
Part Code: 75755B
Facilities: • Blue, cold cathode backlit LCD indicates calland specific location
• Four programmable buttons: tone on/off, textsmall/large, user defined (2no.)
Plate Size: 249mm x 174mm
Box Size: Flush – 225mm x 150mm x 75mm (Part No. 39134) Surface – 250mm x 175mm x 75mm (Part No. 39364)
Material: 16swg Zintec Steel
Finish: Powder Coated Papyrus White RAL 9018
Spares Catalogue Issue : 5f (11/14) Page 34 of 62
Staff Indicators
Codemlon LCD Touch Screen Indicator – non-speech
Part Code: 75760B
Facilities: • Mono screen (120mm x 92mm)• Large text display ~ top three priority calls
indicated at any one time, with touch screenaccess to additional calls
• Automatic time stamping of calls• Time and date display• Integral tone sounder
Controls: Touch screen
Plate Size: 249mm x 174mm
Box Size: Flush – 225mm x 150mm x 75mm (Part No. 39134) Surface – 250mm x 175mm x 75mm (Part No. 39364)
Material: 16swg Zintec Steel
Finish: Powder Coated Papyrus White RAL 9018
Codemlon LCD Touch Screen Indicator - speech
Part Code: 75761B
Facilities: • Mono screen (120mm x 92mm)• Large text display ~ top three priority calls
indicated at any one time, with touch screenaccess to additional calls
• Automatic time stamping of calls• Speech to any active call (via hand unit)• Call ‘hold’• Time and date display• Integral tone sounder
Controls: Touch screen
Plate Size: 324mm x 174mm
Box Size: Flush – 300mm x 150mm x 75mm (Part No. 39135) Surface – 325mm x 175mm x 75mm (Part No. 39338)
Material: 16swg Zintec Steel
Finish: Powder Coated Papyrus White RAL 9018
Spares Catalogue Issue : 5f (11/14) Page 35 of 62
Staff Indicators
Codemlon Nurse Call DataStation – splashproof, non-speech
Part Code: 42381
Features: • 17” TFT XGA Colour LCD incorporating touch-screen control
• CD-Rom Drive• Internal Tone Sounder
Facilities: • Graphical Nurse Call Indication including: calltype, date time stamp, elapsed time
• Input Patient Details• Call Logging• Engineering Event Log• Fault Indication
Depth: 83.5mm
Weight: 6kg
Resolution: 1024 x 768
The Nurse Call DataStation is supplied as a free-standing self-contained unit with the standard system of operation tailored to specific requirements. All functions of the unit are password protected. It is supplied with an external power supply unit.
Codemlon Nurse Call DataStation – splashproof, speech
Part Code: DSTN/SPSP
Features: • 17” TFT XGA Colour LCD incorporating touch-screen control
• CD-Rom Drive• Internal Tone Sounder
Facilities: • Two-way Speech• Graphical Nurse Call Indication including: call
type, date time stamp, elapsed time• Input Patient Details• Call Logging• Engineering Event Log• Fault Indication• Public Address
Depth: 83.5mm
Weight: 6kg
Resolution: 1024 x 768
The Nurse Call DataStation is supplied as a free-standing self-contained unit with the standard system of operation tailored to specific requirements. All functions of the unit are password protected. It is supplied with an external power supply unit.
Spares Catalogue Issue : 5f (11/14) Page 36 of 62
Staff Indicators
Codemlon Nurse Call Data Logger
Part Code: 42367
Comprising: • PC Base Unit• 17" TFT Colour Monitor• Keyboard• Mouse• Pre-loaded software allowing 'calls' and 'faults'
on the Codemlon Network to be logged.
Note: The appearance of the unit may vary from that shown.
Codemlon Central Logging Software Package
Part Code: CLOG
For use with the Codemlon DataStation, the Central Logging Software Package allows information from ward based DataStations to be displayed at a central location.
Codemlon Nurse Presence Software Package
Part Code: NP
For use with the Codemlon DataStation, the Nurse Presence Software Package allows the location of staff to be indicated and logged.
Codemlon Bed Transfer Software Package
Part Code: TX
For use with the Codemlon DataStation, the Bed Transfer Software Package allows nursing staff to divert calls from select beds or groups of beds to an indicator situated in an adjacent ward.
Codemlon Network Interface Lead
Part Code: 42577
Features: • 2 metre length cable• 9 Pin 'D' Type Connector
Note: This lead is for use with the Codemlon DataLogger and VoIP Handset Manager.
Spares Catalogue Issue : 5f (11/14) Page 37 of 62
Staff Indicators
Codemlon Overdoor Unit – 1 Way (white LED)
Part Code: 75724B
Plate Size: 86mm x 86mm
Box Size: Flush – BS 1 Gang (Part No. 39100) Surface – 96mm x 85mm x 30mm (Part No. 39322)
Material: ABS Plastic
Finish: Fine Spark Textured Neutral Grey
Codemlon Overdoor Unit – 1 Way (blue LED)
Part Code: 75725B
Plate Size: 86mm x 86mm
Box Size: Flush – BS 1 Gang (Part No. 39100) Surface – 96mm x 85mm x 30mm (Part No. 39322)
Material: ABS Plastic
Finish: Fine Spark Textured Neutral Grey
Codemlon Overdoor Unit – 1 Way (red LED)
Part Code: 75726B
Plate Size: 86mm x 86mm
Box Size: Flush – BS 1 Gang (Part No. 39100) Surface – 96mm x 85mm x 30mm (Part No. 39322)
Material: ABS Plastic
Finish: Fine Spark Textured Neutral Grey
Spares Catalogue Issue : 5f (11/14) Page 38 of 62
Overdoor Lights
Codemlon Overdoor Unit – 1 Way (amber LED)
Part Code: 75734B
Plate Size: 86mm x 86mm
Box Size: Flush – BS 1 Gang (Part No. 39100) Surface – 96mm x 85mm x 30mm (Part No. 39322)
Material: ABS Plastic
Finish: Fine Spark Textured Neutral Grey
Codemlon Overdoor Unit – nurse presence (green LED)
Part Code: 75752B
Plate Size: 86mm x 86mm
Box Size: Flush – BS 1 Gang (Part No. 39100) Surface – 96mm x 85mm x 30mm (Part No. 39322)
Material: ABS Plastic
Finish: Fine Spark Textured Neutral Grey
Codemlon Overdoor Unit – 1 Way (orange LED)
Part Code: 75776B
Plate Size: 86mm x 86mm
Box Size: Flush – BS 1 Gang (Part No. 39100) Surface – 96mm x 85mm x 30mm (Part No. 39322)
Material: ABS Plastic
Finish: Fine spark textured, Neutral Grey
Spares Catalogue Issue : 5f (11/14) Page 39 of 62
Overdoor Lights
Codemlon Overdoor Unit – 2 Way
Part Code: 75772B
Facilities: • One Way LED (amber)• One Way LED (green)
Plate Size: 146mm x 86mm
Box Size: Flush - BS 2 Gang (Part No. 39101) Surface – 146mm x 86mm x 40mm (Part No. 39301)
Material: 16swg Zintec Steel
Finish: Powder Coated Papyrus White RAL 9018
Codemlon Overdoor Unit – 2 Way
Part Code: 75779B
Facilities: • Two Way LEDs (orange)
Plate Size: 146mm x 86mm
Box Size: Flush - BS 2 Gang (Part No. 39101) Surface – 146mm x 86mm x 40mm (Part No. 39301)
Material: 16swg Zintec Steel
Finish: Powder Coated Papyrus White RAL 9018
Codemlon Overdoor Unit – 2 Way
Part Code: 75780B
Facilities: • One Way LED (orange)• One Way LED (green)
Plate Size: 146mm x 86mm
Box Size: Flush - BS 2 Gang (Part No. 39101) Surface – 146mm x 86mm x 40mm (Part No. 39301)
Material: 16swg Zintec Steel
Finish: Powder Coated Papyrus White RAL 9018
Spares Catalogue Issue : 5f (11/14) Page 40 of 62
Overdoor Lights
Codemlon Lamp/Tone Unit
Part Code: 75746B
Facilities: • One Way LED (orange)• Tone Loudspeaker Module• Protective Grill
Plate Size: 166mm x 91mm
Box Size: Flush – 150mm x 75mm x 50mm (Part No. 39125) Surface – 168mm x 93mm x 52mm (Part No. 39339)
Material: 16swg Zintec Steel
Finish: Powder Coated Papyrus White RAL 9018
Codemlon Lamp/Tone/Switch Unit
Part Code: 75747B
Facilities: • One Way LED (orange)• Tone Loudspeaker Module• Protective Grill• Tone Push (high/low)
Plate Size: 166mm x 91mm
Box Size: Flush – 150mm x 75mm x 50mm (Part No. 39125) Surface – 168mm x 93mm x 50mm (Part No. 39339)
Material: 16swg Zintec Steel
Finish: Powder Coated Papyrus White RAL 9018
Codemlon Tone Sounder Unit
Part Code: 75750B
Facilities: • Tone Loudspeaker Module• Protective Grill
Plate Size: 146mm x 86mm
Box Size: Flush – 150mm x 75mm x 50mm (Part No. 39125) Surface – 168mm x 93mm x 50mm (Part No. 39339)
Material: 16swg Zintec Steel
Finish: Powder Coated Papyrus White RAL 9018
Spares Catalogue Issue : 5f (11/14) Page 41 of 62
Ancillary Tone & Indicator Units
Codemlon C.D.C. Lamp Indicator – 1 Way (red LED)
Part Code: 75736B
Plate Size: 166mm x 91mm
Box Size: Flush – 150mm x 75mm x 50mm (Part No. 39125) Surface – 168mm x 93mm x 50mm (Part No. 39339)
Material: 16swg Zintec Steel
Finish: Powder Coated Papyrus White RAL 9018
Codemlon C.D.C. Lamp Indicator - 230 Volt
Part Code: 75768B
Facilities: • One Way LED (red)• Transformer
Plate Size: 174mm x 99mm
Box Size: Flush – 150mm x 75mm x 50mm (Part No. 39105) Surface – 175mm x 100mm x 40mm (Part No. 39305)
Material: 16swg Zintec Steel
Finish: Powder Coated Papyrus White RAL 9018
Note: This unit requires a 230V ac mains supply.
Codemlon Toilet Call Lamp/Tone Unit
Part Code: 75817B
Facilities: • One Way LED (orange)• Tone Loudspeaker Module• Protective Grill
Plate Size: 166mm x 91mm
Box Size: Flush – 150mm x 75mm x 50mm (Part No. 39125) Surface – 168mm x 93mm x 52mm (Part No. 39339)
Material: 16swg Zintec Steel
Finish: Powder Coated Papyrus White RAL 9018
Spares Catalogue Issue : 5f (11/14) Page 42 of 62
Ancillary Tone & Indicator Units
Codemlon Tone Sounder Unit
Part Code: 75751B
Facilities: • Tone Loudspeaker Module• Protective Grill
Plate Size: 146mm x 86mm
Box Size: Flush – 2 Gang (Part No. 39101) Surface – 2 Gang (Part No. 39301B)
Material: 16swg Zintec Steel
Finish: Powder Coated Papyrus White RAL 9018
Codemlon Lamp/Tone/Switch Unit
Part Code: 75781B
Facilities: • One Way LED (orange)• Tone Loudspeaker Module• Protective Grill• Tone Push (high/low)
Plate Size: 174mm x 99mm
Box Size: Flush – 150mm x 75mm x 50mm (Part No. 39105) Surface – 175mm x 100mm x 50mm (Part No. 39305B)
Material: 16swg Zintec Steel
Finish: Powder Coated Papyrus White RAL 9018
Spares Catalogue Issue : 5f (11/14) Page 43 of 62
Ancillary Tone & Indicator Units (without nodes)
Codemlon Lamp/Tone Unit
Part Code: 75782B
Facilities: • One Way LED (orange)• Tone Loudspeaker Module• Protective Grill
Plate Size: 146mm x 86mm
Box Size: Flush – 2 Gang (Part No. 39101) Surface – 2 Gang (Part No. 39301B)
Material: 16swg Zintec Steel
Finish: Powder Coated Papyrus White RAL 9018
Spares Catalogue Issue : 5f (11/14) Page 44 of 62
Ancillary Tone & Indicator Units (without nodes)
Codemlon Power Supply Unit complete with back-up node
Part Code: LPSU
Facilities: • RJ45 Data Socket for connection of lap topcomputer
• Back-up Node to assist in quick faultrectification
Output: 24 Volts dc Switchmode Power Supply Unit
Plate Size: 384 mm x 344mm
Box Size: Surface – 385 mm x 345 mm x 75mm (Part No. 42504)
Material: 16swg Zintec Steel
Finish: Powder Coated White RAL 9010, 25% gloss (matt)
Note: This unit requires a 230V ac mains supply.
Codemlon Power Supply Unit
Part Code: LPSU3A
Output: 24 Volts dc Switchmode Power Supply Unit (3 Amp)
Plate Size: 384 mm x 344mm
Box Size: Surface – 385 mm x 345 mm x 75mm (Part No. 42504)
Material: 16swg Zintec Steel
Finish: Powder Coated White RAL 9010, 25% gloss (matt)
Note: This unit requires a 230V ac mains supply.
Spares Catalogue Issue : 5f (11/14) Page 45 of 62
Power Supply Units
Codemlon Network Device Power Supply Unit
Part Code: 75728B
Output: 12 Volts dc Switchmode Power Supply Unit
Plate Size: 174mm x 174mm
Box Size: Flush - 150mm x 150mm x 50mm (Part No. 39123)
Surface – 175mm x 175mm x 50mm (Part No. 39307B)
Material: 16swg Zintec Steel
Finish: Powder Coated White RAL 9010, 25% gloss (matt)
Note: This unit requires a 230V ac mains supply.
Yuasa 12 Volt, 12 Ahr Sealed Lead Acid Cells
Part Code: 42856
Note: These cells are provided for use with Codemlon battery/charger units Part No. LPSU, 75790 and 75796, and also for use with Series 600 and Series 900 fire alarm panels.
Codemlon Battery Charger Unit
Part Code: 75790
Output: 24 Volt dc, 6 amp fully fault monitored charger module
Box Size: Surface – 410mm x 448mm x 106mm
Material: Folded steel
Finish: Powder Coated White RAL 9010, 25% gloss (matt)
Note: This unit requires two sealed lead acid 12 volt cells, detailed separately. A 230V ac mains supply is required.
Spares Catalogue Issue : 5f (11/14) Page 46 of 62
Power Supply Units
Codemlon Combined Battery, Charger and Power Control Unit
Part Code: 75796
Facilities: • RJ45 Data Socket for connection of lap topcomputer
• Back-up Node to assist in quick faultrectification
Output: 24 Volt dc, 6 amp fully fault monitored charger module
Box Size: Surface – 560mm x 448mm x 106mm
Material: Folded steel
Finish: Powder Coated White RAL 9010, 25% gloss (matt)
Note: This unit requires two sealed lead acid 12 volt cells, detailed separately. A 230V ac mains supply is required.
Codemlon Uninterruptible Power Supply with cells
Part Code: 76627
Note: This unit is sized to support the DataStation for a period of 30 minutes in the event of a mains failure.
Fusion-IP Power Supply/Charger Unit
Part Code: 74837
Output: 28 Volt DC Switchmode Power Supply Unit (3.5 Amps + 200mA charger current)
Efficiency: 92%
Protection: Short circuit - trip and restart
Box Size: Surface - 300mm x 260mm x 95mm
Material: 1.5mm Zintec Steel
Finish: Powder Coated White RAL 9010, 25% gloss (matt)
Note: This unit requires a 90 - 264V AC mains supply, 47 - 63Hz. It can connect to a Local Area Network (LAN).
Spares Catalogue Issue : 5f (11/14) Page 47 of 62
Power Supply Units
Codemlon Signal Repeater Unit
Part Code: 75716B
Plate Size: 86mm x 146mm
Box Size: Flush - BS 2 Gang (Part No. 39101) Surface – 146mm x 86mm x 40mm (Part No. 39301)
Material: 16swg Zintec Steel
Finish: Powder Coated Papyrus White RAL 9018
Note: This device is inserted into the Cat 5 Cable at 700 metres to boost/condition the signal.
Codemlon Input/Output Interface Unit
Part Code: IFU
Facilities: • Fitted with appropriate I/O Modules to suit thespecific requirements of the project
Box Size: Surface– 300mm x 225mm x 50mm (Part No. 39148)
Material: 16swg Zintec Steel
Finish: Powder Coated White RAL 9010, 25% gloss (matt)
Codemlon Datastation Interface Unit - speech
Part Code: 75756B
Plate Size: 174mm x 174mm
Box Size: Flush – 150mm x 150mm x 50 mm (Part No. 39107) Surface – 175mm x 175mm x 50mm (Part No. 39307)
Material: 16swg Zintec Steel
Finish: Powder Coated Papyrus White RAL 9018
Note: This unit interfaces a DataStation into the Codemlon system. The DataStation must be situated within 2 metres of the Interface Unit.
Spares Catalogue Issue : 5f (11/14) Page 48 of 62
Repeater & Interface Units
Codemlon Pager Interface Unit
Part Code: 75757B
Plate Size: 174mm x 174mm
Box Size: Flush – 150mm x 150mm x 50 mm (Part No. 39107) Surface – 175mm x 175mm x 50mm (Part No. 39307)
Material: 16swg Zintec Steel
Finish: Powder Coated Papyrus White RAL 9018
Note: This unit interfaces 3rd party paging equipment into the Codemlon system. The unit provides a standard RS232 format data output. This unit can also be used to connect a printer into the Codemlon system.
Codemlon Relay Interface Unit
Part Code: 75758B
Facilities: • 2 No. 2 change over contracts rated at 5 volts• 1 Amp resistive 30V dc max.
Plate Size: 146mm x 86mm
Box Size: Flush – 2 gang (Part No. 39101) Surface – 2 gang (Part No. 39301)
Material: 16swg Zintec Steel
Finish: Powder Coated Papyrus White RAL 9018
Codemlon Datastation Interface Unit - non-speech
Part Code: 75759B
Plate Size: 174mm x 174mm
Box Size: Flush – 150mm x 150mm x 50 mm (Part No. 39107) Surface – 175mm x 175mm x 50mm (Part No. 39307)
Material: 16swg Zintec Steel
Finish: Powder Coated Papyrus White RAL 9018
Note: This unit interfaces a DataStation into the Codemlon system. The DataStation must be situated within 2 metres of the Interface Unit.
Spares Catalogue Issue : 5f (11/14) Page 49 of 62
Repeater & Interface Units
Codemlon C.D.C. Interface Unit - 230 volt
Part Code: 75775B
Plate Size: 174mm x 99mm
Box Size: Flush – 150mm x 75mm x 50mm (Part No. 39105) Surface – 175mm x 100mm x 50mm (Part No. 39305)
Material: 16swg Stainless Steel
Finish: Powder Coated Papyrus White RAL 9018
Note: This unit is used to interface a 230V input into the Codemlon-Call System.
Codemlon Datalogger Interface Unit
Part Code: 75778B
Plate Size: 174mm x 174mm
Box Size: Flush - 150mm x 150mm x 50mm (Part No. 39107) Surface – 175mm x 175mm x 50mm (Part No. 39307)
Material: 16swg Zintec Steel
Finish: Powder Coated Papyrus White RAL 9018
Note: This unit interfaces a DataLogger into the Codemlon-Call system. The DataLogger must be situated within 2 metres of the Interface Unit.
Codemlon Network Interface Unit
Part Code: 75791B
Plate Size: 166mm x 91mm
Box Size: Flush – 150mm x 75mm x 50 mm (Part No. 39125) Surface – 168mm x 93mm x 50mm (Part No. 39339)
Material: 16swg Zintec Steel
Finish: Powder Coated Papyrus White RAL 9018
Spares Catalogue Issue : 5f (11/14) Page 50 of 62
Repeater & Interface Units
Headphones
Part Code: 42043
Note: This device is supplied with a 2 metre lead fitted with a 3.5 mm, 3 pole jack plug.
Ceiling Speaker
Part Code: 75119
Facilities: • Loudspeaker rated at 8 ohms
Mounting: Flush (Ceiling)
Material: Plastic
Finish: White
Codem Isolator Unit
Part Code: 75610
Plate Size: 174mm x 174mm
Box Size: Surface – 175mm x 175mm x 35mm (Part No. 39323)
Material: Plate - 16swg Stainless Steel Box – Galvanised Mild Steel
Finish: Plate – Satin Lacquered Box – Textured Brown
Note: For added integrity this unit isolates the entertainment system within a ward. The unit gives twin outputs, each capable of supporting up to 30 beds and/or loudspeaker controllers. The unit requires a 230V ac mains supply.
Codem Repeater Unit
Part Code: 75611
Plate Size: 174mm x 174mm
Box Size: 175mm x 175mm x 35mm – surface (Part No. 39323)
Material: Plate - 16swg Stainless Steel Box – Galvanised Mild Steel
Finish: Plate – Satin Lacquered Box – Textured Brown
Note: Inserted into the dataline at 300 metres to boost/condition the entertainment signal. This unit requires a 230V ac mains supply.
Spares Catalogue Issue : 5f (11/14) Page 51 of 62
Patient Entertainment
Codem Line Terminator
Part Code: 75614
Note: This component is required at the end of each ‘run’ of data cable and is installed within the last bedhead unit/loudspeaker controller unit.
Codem Loudspeaker Control Unit
Part Code: 75774B
Facilities: • Control of 1 or 2 Loudspeakers (output rated at2 watts total)
• Channel Selection• Volume Control• On/off Switch
Plate Size: 249mm x 174mm
Box Size: Flush – 225mm x 150mm x 50mm (Part No. 39155) Surface – 250mm x 175mm x 50mm (Part No. 39324)
Material: 16swg Zintec Steel
Finish: Powder Coated Papyrus White RAL 9018
Note: This unit requires a 24V dc mains supply.
Spares Catalogue Issue : 5f (11/14) Page 52 of 62
Patient Entertainment
Codem Central Rack
Part Code: 75798
Features: • High quality sound
• Channel frequency display
• Touch screen tuning
• Volume control
• Local channel monitoring
• Non-volatile memory
• Modular assembly
• Phase locked loop synthesised receivers
Standard Facilities:
11 no. FM Tuners 2 no. Auxiliary Inputs
Dimensions: 475mm (w) x 175mm (h) x 495mm (d)
Weight: 13.4kg
The CODEM Central Rack receives inputs from external aerial connections (or user accessible audio inputs) and converts them into high quality audio signals. The signals are then converted into digital form for transmission around the building. They are subsequently converted back into high quality audio signal and output at the bedhead. The unit is designed to receive and distribute FM and auxiliary input signals. AM tuners can be added at additional cost.
Note: This unit requires 240V ac mains supply and aerial feed of professional quality.
Spares Catalogue Issue : 5f (11/14) Page 53 of 62
Patient Entertainment
Codemlon LCD Patient Television
Part Code: 66010
Specification: • High resolution 8" TFT LCD with 16:9 aspectratio
• Anti-glare Screen Protector• High Impact Plastic Enclosure• On/off Switch• 2 no. Internal Loudspeakers• 3.5mm Jack Socket for Headphones• Kinetic Arm with 1.4 metre overall reach
Finish: TV Enclosure Front - Grey RAL 7015 TV Enclosure Back - Black RAL 9005 TV Arm - Powder Coated, Papyrus White RAL 9018
Note: The patient television is designed to operate on standard analogue TV signals. Typically any digital channels would be converted into analogue at the head-end of the TV distribution system. This unit is controlled via the nurse call patient hand unit.
Spares Catalogue Issue : 5f (11/14) Page 54 of 62
Patient Entertainment
Third Party Network Link
Part Code: GL
Note: This device is used to Interface between a Codemlon-Call System and third party equipment. It is housed within the Power Supply Unit.
Codemlon Network Link and Software
Part Code: NL
Note: This device is used to connect Codemlon-Call Systems to a Codemlon-Call Network. It is housed within the Power Supply Unit.
Spares Catalogue Issue : 5f (11/14) Page 55 of 62
Site Networking
Infra-red Transmitter (ID badge)
Part Code: 74655
Dimensions: 79mm x 39mm x 7mm
Facilities: • Infra-red signalling• Light-weight ~ 24 grams (including battery)• Fail safe periodic transmission• Long-life Lithium battery ~ 18 months• Battery low signal indication• Self-adhesive label for user’s own photograph
& details
Note: The length of transmission is 3 seconds. This device includes a concealed button which can be programmed as an optional facility to summon staff assistance.
Infra-red Receiver
Part Code: 74614
Diameter: 170mm
Mounting: Flush (Ceiling)
Material: ABS and polycarbonate.
Note: This unit is supplied complete with a mounting bracket and Junction Box.
Spares Catalogue Issue : 5f (11/14) Page 56 of 62
Automatic Nurse Presence
Codemlon Nurse Presence Unit
Part Code: 75762B
Facilities: • Presence Push
Plate Size: 166mm x 91mm
Box Size: Flush – 150mm x 75mm x 50mm (Part No. 39125) Surface – 168mm x 93mm x 50mm (Part No. 39339)
Material: 16swg Zintec Steel
Finish: Powder Coated Papyrus White RAL 9018
Spares Catalogue Issue : 5f (11/14) Page 57 of 62
Manual Nurse Presence
Infra-red & Radio-frequency Transmitter (pendant)
Part Code: 74608
Facilities: • Infra-red signalling• Light-weight ~ 25 grams
(including battery)• Fail safe periodic transmission• Long-life Lithium battery ~
18 months• Battery low signal indication
Note: An alarm is activated by pushing the large green button. The length of transmission is 14 seconds.
Infra-red Receiver
Part Code: 74614
Diameter: 170mm
Mounting: Flush (Ceiling)
Material: ABS and polycarbonate.
Note: This unit is supplied complete with a mounting bracket and Junction Box.
Radio-frequency Receiver
Part Code: 74615
Diameter: 170mm
Mounting: Flush (Ceiling)
Material: ABS and polycarbonate.
Note: This unit is supplied complete with a mounting bracket and Junction Box.
Spares Catalogue Issue : 5f (11/14) Page 58 of 62
Personnel Attack Alarm
Codemlon Mushroom Headed Panic Button
Part Code: 75786B
Facilities: • 40mm Momentary Push (red)
Plate Size: 98mm x 98mm
Box Size: Flush - 75mm x 75mm x 50mm (Part No. 39102)
Surface - 100mm x 100mm x 50mm (Part No. 39302)
Material: 16 swg Zintec Steel
Finish: Powder Coated Papyrus White RAL 9018
Note: This unit is a momentary switch which will latch the call onto the system and must be reset remotely.
Codemlon Mushroom Headed Panic Button
Part Code: 75787B
Facilities: • 40mm Auto-lock Push (red)
Plate Size: 98mm x 98mm
Box Size: Flush - 75mm x 75mm x 50mm (Part No. 39102)
Surface - 100mm x 100mm x 50mm (Part No. 39302)
Material: 16 swg Zintec Steel
Finish: Powder Coated Papyrus White RAL 9018
Note: This unit is a latching switch which will be programmed to set/reset the call.
Spares Catalogue Issue : 5f (11/14) Page 59 of 62
Panic Alarm
Reed Switch
Part Code: 03527
Maximum DC Rating:
250 volts, 1.5 amps (resistive)
Size: 28mm (h) x 78mm (l) x 9mm (d)
Mounting: Surface
Note: This unit is supplied complete with a 70mm length of cable. It operates with Actuator Magnet Part No. 03528.
Actuator Magnet
Part Code: 03528
Size: 25mm (h) x 38mm (l) x 9mm (d)
Mounting: Surface
Note: This unit operates with Reed Switch Part No. 03527.
isc Codemlon BedBinder-i Software Package
Part Code: 75785
Features: • Windows based software program to assist insystem maintenance and testing.• Location Label Changing• Set Volume Tone Levels• View Project Information• System Interrogation• Set Clock• Print and save reports as ‘txt’ or Microsoft
‘excel’ files.
Comprising: • Software CD-Rom• Instruction Booklet• Codemlon Longate Serial Node• Longate to PC Lead• Longate to Codemlon System Lead
Note: A laptop computer with the specification given below is required to run the BedBinder-i software. A laptop computer is not included in our offer. The BedBinder-i software is supported by a technical help line.
Laptop Specification:
• One Serial Port• 500Mhz + 128Mb RAM• Windows 95/98/2000/XP
Spares Catalogue Issue : 5f (11/14) Page 60 of 62
Miscellaneous
Issue No. 5f (11/14)