Numeracy and Mathematics Guide - Jordanhill School...Practice! Mathematics and numeracy are...
Transcript of Numeracy and Mathematics Guide - Jordanhill School...Practice! Mathematics and numeracy are...
Jordanhill School
Numeracy and
Mathematics Guide
A guide to how selected numeracy and
mathematics topics are taught across the
curriculum
2
Contents
3. Introduction
4. Curriculum for Excellence Levels
5. Place Value
6. Addition
7. Subtraction
8. Multiplication from 1 to 10
9. Multiplication by a Multiple of 10; Long Multiplication
10. Division
11. Integers
12. Order of Operations (BODMAS)
13. Fractions; Equivalent Fractions
14. Fraction of a Quantity
15. Mixed Numbers and Improper Fractions
16. Adding and Subtracting Fractions
17. Multiplying Fractions
18. Dividing Fractions
19. Decimals
20. Percentages
21. Finding a Percentage
22. Percentages: Non-Calculator/Mental Strategies
24. Percentages on a Calculator
25. Rounding
26. Significant Figures
27. Scientific Notation
28. Ratio
29. Applications of Ratios
30. Proportion
31. Time
32. Angles
33. Coordinates
34. Scale and Grid References
35. Information Handling – Averages
36. Types of Graphs; Bar Graphs
37. Histograms; Line Graphs
38. Scatter Diagrams
39. Line of Best Fit
40. Reading Pie Charts
41. Equations
42. Formulae
43. Measurement
44. Applications of Measurement
47. Glossary
3
Introduction
Why Numeracy?
“Numeracy is a skill for life, learning and work. Having well developed numeracy
skills allows young people to be more confident in social settings and enhances
enjoyment in a large number of leisure activities.”
Curriculum for Excellence
Our Aim
At Jordanhill School we believe that it is essential to promote numeracy across all
curricular areas in a consistent, coherent and efficient way. We appreciate that
numeracy is not simply a subset of Mathematics; it is a life skill which permeates and
supports all areas of learning.
How Will This Booklet Help?
This booklet has been developed primarily to encourage effective learning and
teaching methodologies in numeracy. It is our hope that it will provide guidance to all
staff, pupils and parents on how basic numeracy topics are delivered within the
Mathematics department. Examples have been included which incorporate the work
of subjects other than Mathematics, such as Science, Design and Technology, Art and
Geography, amongst others. We have also included areas of Mathematics which,
although not classed as numeracy, appear frequently in the work of other departments.
For staff, reference can be made to the material contained here-in prior to delivering a
numeracy topic. It is also hoped that pupils and parents will refer to this booklet
should uncertainty arise when completing homework or revising for an assessment.
Why More Than One Method?
You will find that in some topics more than one method has been included. The
method used to solve a problem will depend on how difficult it is and the numbers
involved. Moreover, both calculator and non-calculator (mental) methods have been
included in a number of cases. We cannot stress enough how important it is that
pupils work hard to develop their mental skills rather than look for a calculator at the
earliest opportunity.
What Else Can Be Done To Improve Numeracy?
Practice! Mathematics and numeracy are practical subjects. Without practice it is very
difficult to fully comprehend the methods and strategies required to apply numeracy
across the curriculum and in life beyond school. It is often the case that one area of
numeracy relies upon another; therefore it is imperative that solid foundations are
established early in a child’s education upon which to build the essential skills
required to be confident in numeracy.
We hope you find this booklet useful; happy reading!
4
Curriculum for Excellence Levels
The table below is a guide to the Curriculum for Excellence Level at which a pupil
should expect to see the topics covered within this booklet in their Primary or
Mathematics class. However, please be aware that pupils may experience numeracy
topics across the curriculum at different times and not always in the depth covered
herein.
(Details of a Curriculum for Excellence can be found at www.ltscotland.org.uk.)
Topic Early First Second Third Fourth
Place Value � � � � �
Addition � � � � �
Subtraction � � � � �
Multiplication from 1 to 10 � � � �
Multiplication by a multiple of 10 � � � �
Long multiplication � � �
Division � � � �
Integers � � �
Order of operations � � �
Fractions � � � � �
Equivalent fractions � � � �
Fractions of a quantity � � � �
Mixed numbers and improper
fractions � �
Adding and subtracting fractions � �
Multiplying fractions �
Dividing fractions �
Decimals � � � �
Percentages � � �
Rounding � � �
Significant figures � �
Scientific notation � �
Ratio � �
Proportion � �
Time � � � � �
Angles � � �
Coordinates � � �
Scale and grid references � � �
Averages � �
Graph Work � � � �
Equations � �
Formulae � �
Measurement � � � � �
5
Place Value
Place value defines our counting system.
Hundreds
Tens
Units
Decimal
Point
Tenths
Hundredths
6 1 5 . 8 3
This is the number six hundred and fifteen point eight three.
Note that the decimal point is located between the units and tenths columns and does
not move.
Multiplication by 10, 100 and 1000
For multiplication by 10, 100 and 1000 the digits move to the left by 1, 2 and 3
places, respectively.
Thousands
Hundreds
Tens
Units
Decimal
Point
Tenths
Hundredths
5 . 8 3
5 8 . 3
5 8 3
5 8 3 0
Division by 10, 100 and 1000
For division by 10, 100 and 1000 the digits move to the right by 1, 2 and 3 places,
respectively.
Hundreds
Tens
Units
Decimal
Point
Tenths
Hundredths
Thousandths
5 8 3
5 8 . 3
5 . 8 3
0 . 5 8 3
The pattern continues in this way for powers of 10 larger than 1000. Moreover, we do
not say “add a zero” for multiplication and “take off a zero” for division as this can
cause significant problems when decimals are involved.
( 10)×
( 1000)× ( 100)×
( 1000)÷ ( 100)÷
( 10)÷
6
1
7 9 3 4
2 7 8
2
+ 1 1
7 9 3 4
2 7 8
1 2
+ 1 1 1
7 9 3 4
2 7 8
2 1 2
+ 1 1 1
7 9 3 4
2 7 8
8 2 1 2
+
Addition
Written Method
When adding numbers, ensure that they are lined up correctly according to their place
value. Start at the right hand side, write down the units and then carry tens to the next
column on the left.
Example Add 7934 and 278
Mental Strategies
This is not an exhaustive list of mental strategies for addition and which strategy you
choose may vary depending on the question.
Example Find 38 + 57
Method 1 Add tens, add units and add together.
30 + 50 = 80 8 + 7 = 15 80 + 15 = 95.
Method 2 Split one number into units and tens and then add in two steps.
38 + 50 = 88 88 + 7 = 95.
Method 3 Round up one number to the next ten and then subtract.
38 + 60 = 98 (60 is 3 too many so now subtract 3)
98 – 3 = 95.
4 + 8 = 12 3 + 7 + 1 = 11 9 + 2 + 1 = 12 7 + 1 = 8
7
8
9311 4 13
- 4 2 5
8 7 1 8
Subtraction
Written Method
After aligning digits by their place value we use decomposition for subtraction; we do
not use “borrow and pay back”.
Example Subtract 425 from 9143
This subtraction was completed using the following steps:
1) In the units column try 3 subtract 5 – we can’t do this here
2) From the tens column we have exchanged 1 ten for 10 units (i.e. 40 becomes
30 + 10 units)
3) The 10 units are added on to the units column to make 13 – 5 = 8
4) The subtraction in the tens column is now 3 – 2 = 1.
5) We repeat this process in the hundreds column to complete the subtraction.
Mental Strategies
Example Calculate 82 - 67
Method 1 “Count On”
3 + 10 + 2 = 15.
Method 2 Decompose the number to be subtracted
67 = 60 + 7 so subtract 60 then subtract 7
82 – 60 = 22 22 – 7 = 15.
67 70 80 82
+ 3 + 10 + 2
8
Multiplication from 1 to 10
It is essential that every pupil can recall basic multiplication tables from 1 to 10
readily.
× 1 2 3 4 5 6 7 8 9 10
1 1 2 3 4 5 6 7 8 9 10
2 2 4 6 8 10 12 14 16 18 20
3 3 6 9 12 15 18 21 24 27 30
4 4 8 12 16 20 24 28 32 36 40
5 5 10 15 20 30 35 40 45 50
6 6 12 18 24 30 36 42 48 54 60
7 7 14 21 28 35 42 49 56 63 70
8 8 16 24 32 40 48 56 64 72 80
9 9 18 27 36 45 54 63 72 81 90
10 10 20 30 40 50 60 70 80 90 100
Mental Strategies
Example Calculate 27 8×
Method 1 Decompose any number larger that one digit.
27 = 20 + 7 so multiply 8 by 20 then 8 by 7 and add
20 8 160× = 7 8 56× =
Therefore 27 8 160 56× = +
216=
Method 2 Round to the nearest 10.
30 8 240× = but 30 is three lots of 8 too many so subtract 3 8 24× =
240 – 24 = 216.
5 8 40× =
25
9
Multiplication by a Multiple of 10
It is relatively easy to multiply by 10, 100, 1000 etc (see page 5). Therefore, given a
calculation which involves multiplication by a multiple of 10 (40, 600, 3000 etc) we
can quickly complete our calculation in two steps by deconstructing the number. This
is often referred to as the “two step method”.
Examples
1. Calculate 14 50×
50 5 10= × so
14 5 70× = and 70 10 700× =
2. Find 6 7 4000⋅ ×
4000 4 1000= × so
6 7 4 26 8⋅ × = ⋅ and 26 8 1000 26⋅ × = 800
Long Multiplication
For long multiplication we multiply by the units and then by the tens before adding
the resulting answers. (For numbers larger than two digits the process continues in the
same way.)
Examples
1. Calculate 65 27×
6 5
× 2 7
4 5 5 65 7×
+ 1 3 0 0 65 20×
1 7 5 5
2. Calculate 413 59×
4 1 3
× 5 9
3 7 1 7 413 9×
+ 2 0 6 5 0 413 50×
2 4 3 6 7
Multiply by 5 Multiply by 10
Multiply by 4 Multiply by 1000
10
1 2
0 3 5
5 1 7 5
5 1 2
0 7 2 3
7 5 0 6 1 1 3 2
1 4 7 5
4 5 9 0 0
⋅
⋅1
1 4 r 3
4 5 9
Division
Division can be considered as the reverse process of multiplication. For example,
2 3 6× = so 6 2 3÷ = and 6 3 2÷ = .
Essentially division tells us how many times one number (the divisor) goes into
another (the dividend). From above, 2 goes into 6 three times and 3 goes into 6 two
times. The answer from a division is called the quotient. For more difficult divisions
we use the division sign:
11111111111
We start from the left of the dividend and calculate how many times the divisor
divides it. This number is written above the division sign. If the divisor does not
divide the digit exactly then the number left over is called the remainder. If there is a
remainder then it is carried over to the next column and the process is repeated. If
there is no remainder then we move directly on to the next column.
At the end of the dividend if there is still a remainder then in the early stages pupils
are expected to write the remainder after the quotient, however, as a pupil progresses
we expect the dividend to be written as a decimal and the remainder to be carried into
the next column. It is important that digits are lined up carefully.
Examples
1. 2 86 →
43
2 86
2.
232
3 696 3.
4. 5. or
Note that the zero at the beginning of the quotient for examples 3 and 4 is not
necessary as 035 = 35 and 0723 = 723.
Division by a Multiple of 10
Long division is no longer part of the Curriculum, however pupils are expected to
divide by multiples of 10. The method is similar to that outlined in the previous page.
Example Calculate 1020 60÷ .
60 = 6 10× so divide by 6 and divide by 10 (in any order).
1020 10÷ = 102 and
17
6 102 therefore 1020 60÷ =17.
dividend divisor
quotient
4
8 divided by 2 is 4
6 divided by 2 is 3 with no remainder.
1 divided by 5 is zero with remainder 1 so the
1 is carried to the 7. The next calculation is 17
divided by 5 which is 3 remainder 2. Carry the
2 and then complete with 25 divided by 5
(early stages) (later stages)
11
2 3 -2 -3 0 1 4 5 -1 -4 -5
Integers
Despite common misconceptions in young children, the first number is not zero! The
set of numbers known as integers comprises positive and negative whole numbers and
the number zero. Negative numbers are below zero and are written with a negative
sign, “ – ”. Integers can be represented on a number line.
Integers are used in a number of real life situations including temperature, profit and
loss, height below sea level and golf scores.
Adding and Subtracting Integers
Consider 2 + 3. Using a number line this addition would be “start at 2 and move right
3 places”. Whereas 2 – 3 would be “start at 2 and move left 3 places”. Picturing a
number line may help pupils extend their addition and subtraction to integers.
Examples
1. -4 + 3 start at -4 and move 2. -8 + 10 start at -8 and move
= -1 right 3 places. = 2 right 10 places.
3. -5 – 2 start at -5 and move 4. -11 – 7 start at -11 and move
= -7 left 2 places. = -18 left 7 places.
Now consider 2 + (-3). Here we read “start at 2 and prepare to move right but then
change direction to move left 3 places because of the (-3). Therefore, 2 + (-3) = -1 and
we could rewrite this calculation as
2 + (-3)
= 2 – 3
= -1.
Similarly, 2 – (-3) can be read as “start at 2 and prepare to move left but instead
change direction because of the (-3) and move right 3 places”. So 2 – (-3) = 5 and we
can write our calculation as
2 – (-3)
= 2 + 3
= 5.
Therefore, for any positive number b,
Examples
1. 4 + (-6) 2. -7 + (-8) 3. -11 + (-5) 4. 6 – (-4) 5. -3 – (-5) 6. -8 – (-2)
= 4 – 6 = -7 – 8 = -11 – 5 = 6 + 4 = -3 + 5 = -8 + 2
= -2 = -15 = -16 = 10 = 2 = -6
7. What is the difference in temperature between -14oC and -51
oC?
a + (-b) = a – b and a – (-b) = a + b.
-14 – (-51)
= -14 + 51
= 37oC
12
Order of Operations (BODMAS)
Calculations which involve more than one operation (addition, subtraction,
multiplication or division) have to be completed in a specific order.
For example, what is the value of 3 5 2+ × ?
Two suggestions are 8 2 16× = and 3 + 10 = 13.
The correct answer is 13.
The mnemonic BODMAS helps us to remember the correct order to do calculations
in.
Brackets
Of
Division
Multiplication
Addition
Subtraction
Brackets means tidy up anything inside brackets whilst the “of” refers to fractions and
percentages (see later). Finally, the division and multiplication have equal priority as
do the addition and subtraction.
From the example above, BODMAS tells us that we must do the multiplication 5 2×
before adding the answer to the 3.
Scientific calculators are generally programmed to follow these rules, however basic
calculators may not and therefore caution must be exercised when using them.
Examples
1. 25 18 3− ÷ division first
= 25 6− then subtraction
= 19.
2. ( )4 3 8 2+ + × brackets first
4 11 2= + × then multiplication
4 22= + then addition
26= .
3. ( )230 2 1 3 4− + × + brackets first 2(2 2 2)= ×
30 5 3 4= − × + then multiplication
30 15 4= − + addition and subtraction have equal priority so
15 4= + do either next then the last one.
19.=
Calculating
3 + 5 first
Calculating
5 2× first
13
60 30
72 36
15
18
5.
6
=
=
=
Fractions
A fraction tells us how much of a quantity we have. Every fraction has two parts, a
numerator (top) and a denominator (bottom).
Examples
1. 2
5
This is the fraction two fifths which represents two out of five.
2. What fraction of the rectangle is shaded?
There are 9 parts shaded out of 18 so the fraction is 9
18.
Equivalent Fractions
Equivalent fractions represent the same amount. In Example 2 above we said that 9
18
of the rectangle is shaded but we could also have said that 1
2 is shaded. That is,
9 1
18 2= .
To find equivalent fractions we divide both the numerator and the denominator of the
fraction by the same number. (Ideally this is the highest common factor, HCF, of the
numbers, i.e. the highest number which can divide each number with no remainder.)
In the example above we divided by 9. We always aim to write fractions in the
simplest possible form.
Examples
1. (a) 6
10 =
3
5 b)
35
63 =
5
9
2. Simplify 60
72.
numerator
denominator
÷ 2
÷ 2 ÷ 7
÷ 7
HCF of 6
and 10 is 2 HCF of 35
and 63 is 7
Here it is harder to spot the HCF of 60 and
72 which is 12 so we have had to repeat
the process with lower common factors.
14
If the numerator of the fraction is one
then we can stop here as multiplying any
term by one leaves it unchanged.
Fraction of a Quantity
Throughout fraction and percentages work the word “of” represents a multiplication.
To find a fraction of a quantity you divide by the denominator and multiply by the
numerator. If it is possible to simplify the fraction first by finding an equivalent
fraction then this will make the calculation easier.
Examples
1. Find 1
2 of 30. 2. Find
1
3of 219.
1
2 of 30 = 30 ÷ 2
1
3of 219 = 219 ÷ 3
=15. = 73.
3. Calculate 3
4 of 64
1
4of 64 = 64 ÷ 4
= 16
3
4of 64 = 3 ×
1
4of 64
= 3 × 16
= 48.
4. Find 8
20 of 500.
8 2
20 5= so now find
2
5 of 500.
1
5 of 500 = 500 ÷ 5
= 100
2
5 of 500 = 2 × 100
= 200.
Find 1
4 then multiply by 3 (the
numerator) to get 3
4.
Use equivalent fractions
to simplify 8
20 then find
1
5 and multiply by 2 to
get 2
5.
15
Mixed Numbers and Improper Fractions
• If the numerator of a fraction is smaller than the denominator then the fraction
is called a proper fraction.
• If the numerator is larger than the denominator then the fraction is an improper
fraction.
• If a number comprises a whole number and a fraction then it is called a mixed
number.
Examples
3
4 is a proper fraction,
11
2 is an improper fraction,
12
3 is a mixed number.
Conversion Between Mixed Numbers and Improper Fractions
To write an improper fraction as a mixed number we calculate how many whole
numbers there are (by considering multiples of the denominator) and then the
remaining fraction part.
Examples
1. 11
2 =
10 1
2 2+
= 1
52
.
2. 14 12 2
3 3 3= +
= 2
43
.
3. 31 28 3
4 4 4= +
= 3
74
.
Conversely, to write a mixed number as an improper fraction we convert the whole
number to a fraction and then add the existing fraction on.
Examples
1. 1 2 3 1
23 3 3
×= + 2.
2 12 5 212
5 5 5
×= + 3.
3 6 7 36
7 7 7
×= +
6 1
3 3= +
60 2
5 5= +
42 3
7 7= +
7
3= .
62
5= .
45
7= .
If we are given mixed numbers in a question with multiplication or division then we
change the mixed number to an improper fraction before undertaking the calculation.
We can also do this for addition or subtraction or treat the whole and fraction parts
separately.
The highest multiple of 2 below 11 is 10 so the
whole number must be 10
52
= with 1
2 left over.
The highest multiple of 3 below 14 is 12 so the
whole number must be 12
43
= with 2
3 left over.
The highest multiple of 4 below 31 is 28 so the
whole number must be 28
74
= with 3
4 left over.
16
3 1
2 34 5
+ 6. 4 1
5 17 4
−
= 3 1
(2 3)4 5
+ + +
4 1(5 1)
7 4
= − + −
195 .
20= =
94
28.
Adding and Subtracting Fractions
When adding and subtracting fractions, the denominators of the fractions must be the
same. If the denominators are different then we find the lowest common multiple of
the denominators (the lowest number in both times tables) and use equivalent
fractions (see page 13).
Examples
1. 1 1
2 4+
= 2 1
4 4+
= 3
4.
2. 3 1
5 3+
= 9 5
15 15+
= 14
15.
3. 4 2
7 5− 4.
2 5
3 12−
= 20 14
35 35− =
8 5
12 12−
= 6
35. =
3
12
= 1
4.
5. 3 1
2 34 5
+ 6. 4 1
5 17 4
−
11 16
4 5
55 64
20 20
119
20
195 .
20
= +
= +
=
=
OR 5.
The lowest common multiple (LCM) of 2 and 4 is 4
so this is our new denominator for both fractions.
Now add the numerators to find out how
many quarters you have.
LCM of 5 and 3 is15
LCM of 7 and 5 is 35 LCM of 3 and 12 is 12
Always simplify a
fraction as far as
possible.
39 5
7 4
156 35
28 28
121
28
94 .
28
= −
= −
=
=
Be careful using
this method. If,
after subtraction,
you get a negative
fraction you must
subtract it from
the whole
number.
17
Multiplying Fractions
When multiplying a fraction by a whole number it can be useful to write the whole
number as a fraction. For example, 2 = 2
1 and 3 =
3
1.
Consider the following diagrams
Here we have 1
3shaded in each rectangle, therefore altogether we have four lots of
1
3shaded. That is, we have
1 1 1 1 4.
3 3 3 3 3+ + + =
We could also have written this calculation as
1
43
× = 4 1
1 3×
= 4
.3
Similarly, un-shaded we have 4 lots of 2
3 which is
2 2 2 2 8
3 3 3 3 3+ + + = .
As a multiplication this is
2 4 2
43 1 3
× = ×
= 8
3.
These examples demonstrate that when multiplying fractions we simply have to
multiply the numerators together and multiply the denominators together.
Examples
1. 2 4
7 9× 2.
4 35
7 10× × 3.
2 22 4
5 3×
= 2 4
7 9
×
× =
4 3 5
7 10 1× × =
12 14
5 3×
= 8
63. =
60
70 =
168
15
= 6
7. =
56
5
=1
115
.
18
Dividing Fractions
Consider the following diagrams.
When we half 1
4we divide it by 2 to get the answer
1
8. Dividing by 2 is the same as
multiplying by 1
2, therefore, we can write
1 1 22
4 4 1÷ = ÷
= 1 1
4 2×
= 1
8.
Examples
1. 1 1
2 4÷
= 1 4
2 1×
= 4
2
= 2.
2. 2 3
5 5÷ 3.
6 3
7 2÷ 4.
3 53 2
5 8÷
2 5
5 3= ×
6 2
7 3= ×
18 21
5 8= ÷
10
15=
12
21=
18 8
5 21= ×
2
.3
= 4
7= .
144
105=
39
1105
=
13
135
= .
Now half the one
quarter that is
shaded.
This example demonstrates that to divide by a fraction we multiply by the
reciprocal of the dividing fraction (what we get when we turn it upside down).
4
1is the reciprocal of
1
4 and our calculation is now
a multiplication.
19
Complete
the column
with a zero
Decimals
The value of a digit in a decimal, or decimal fraction, is determined by place value.
This enables us to convert between decimals and fractions.
Examples
1. For the decimal 0 614⋅ ,
U . Tenths Hundredths Thousandths
0 . 6 1 4
6 can be written as 6
10; 1 as
1
100 and 4 as
4
1000.
Therefore, an alternative way of writing 0 614⋅ would be
6 1 4
10 100 1000+ +
600 10 4
1000 1000 1000
614
1000
307.
500
= + +
=
=
2. 8
0 810
⋅ = 3. 92
0 92100
⋅ = 4. 428
0 4281000
⋅ =
4
5= .
23
25= .
107
250= .
To convert a fraction back in to a decimal you simply divide the numerator by the
denominator. From above,
307 500 0 614÷ = ⋅ , 4 5 0 8÷ = ⋅ , 23 25 0 92÷ = ⋅ , 107 250 0 428÷ = ⋅ .
Decimals and Arithmetic
Be careful with basic decimal calculation that you align the decimal points.
Examples
1. 2 4 1 93⋅ + ⋅ 2. 3 14 1 82⋅ − ⋅ 3. 4 17 6⋅ × 4. 10 5 2⋅ ÷
2 40⋅ 3 14⋅ 4 17⋅
(See rules of adding fractions)
+ 1 93⋅
4 ⋅ 33
1 ⋅ 82
1 ⋅ 32
× − 6
25 02⋅
5 25
2 10 50
⋅
⋅
If you have a remainder at the end of a
calculation, add a zero on to the end
of the decimal and continue with the
calculation.
1
20
Percentages
Percent refers to “out of 100”.
Example As a fraction, 48% = 48 out of 100
= 48
100
12
25= .
As a decimal, 48% = 48
100
= 48 ÷ 100
= 0 48⋅ .
Pupils are expected to know these commonly used percentages as fractions and
decimals:
Percentage Fraction Decimal
1% 1
100
0 01⋅
10% 1
10
0 1⋅
20% 1
5
0 2⋅
13
33 %
1
3
0 333 0 3⋅ = ⋅i
…
50% 1
2
0 5⋅
23
66 %
2
3
0 666 0 6⋅ = ⋅i
…
75% 3
4
0 75⋅
To convert a decimal to a percentage multiply the decimal by 100%.
Example 0 71 0 71 100⋅ = ⋅ × %
= 71%
Given a fraction, find the associated decimal via dividing the numerator by the
denominator and then multiply by 100%.
Example 4
4 55
= ÷
0 8 100= ⋅ × %
80= %.
21
Finding a Percentage
Given a scenario we can find the associated percentage by writing the information as
a fraction and then using the conversions on the previous page. In PE pupils may be
asked to find out how successful they have been in an activity and then convert the
successful attempts into a percentage to track their progress.
Examples
1. In a class of 30 pupils there are 12 girls. What percentage of the class
are girls?
We have 12 girls out of 30 in total so the fraction is12
30.
As a percentage, 12
12 3030
= ÷
0 4= ⋅
= 40%. (Multiply decimal by 100%)
2. Alan practices scoring goals from the penalty spot in Football. From 80
attempts he is successful 49 times. What is Alan’s success rate as a
percentage?
Alan’s success rate is 49
49 8080
= ÷
= 0 6125⋅
= 61 25⋅ % (Multiply decimal by 100%)
= 61% rounded to the nearest percent.
Percentage Increase/Decrease
If we are told how much a quantity has increased or decreased by and want to convert
this to a percentage of the original value we find out how much the increase or
decrease is and then divide it by the original amount. This is also true of profit and
loss.
Examples
1. A plant grown in a Biology classroom measured 52cm when it was
planted. Six months later it measured 68cm. Calculate the percentage
increase in the height of the plant based on its height when planted.
Increase is 68 – 52 = 16 cm. 16
0 3152
= ⋅ to 2 d.p.
= 31%.
2. A car bought four years ago for £9 250 has just been sold for £1 500.
Calculate how much money the owner has lost as a percentage of its
cost price.
Loss is 9 250 – 1 500 = £ 7 750. 7750
0 849250
= ⋅ to 2 d.p.
= 84%.
Original height
22
(See fraction of a quantity)
Percentages – Non-Calculator/Mental Strategies
This is not an exhaustive list of strategies and the method you use may vary from one
example to the next.
Method 1 Equivalent Fractions
Example In a survey of 200 pupils, 75% had a games console. How many pupils
is this?
75% = 75
100
= 3
4 so we now want to find
3
4of 200.
1
4of 200 = 200 ÷ 4
3
4of 200 = 3 ×50
= 50 = 150.
150 pupils had a games console.
Method 2 Using 1%
Recall that 1% = 1
100 so to find 1% we divide by 100.
Example Jenny’s annual salary is £28 000. If she gets a pay rise of 3% what is
her new annual salary?
1% of 28 000 = 28 000 ÷ 100
= £280
Now 3% = 3 × 1%
= 3 × 280
= £840.
Jenny’s new salary is £28 000 + £840 = £28 840.
Method 3 Using 10%
As 10% = 1
10(when simplified) to find 10% we divide by 10.
Example A jacket is marked as 40% off in a sale. If the jacket originally cost
£220, what is its sale price?
10% of £220 = 220 ÷ 10 40% = 4 × 10%
= £22 so = 4 × 22
= £88.
The sale price of the jacket is £220 - £88 = £132.
23
Percentages – Non-Calculator/Mental Strategies (cont.)
We can combine two or more of the methods outlined above
Examples
1. During a tennis training session Andy hit 180 first serves. Of these,
55% were good serves. How many good serves did Andy have?
50% = 1
2,
1
2 of 180 = 180 ÷ 2
= 90.
10% of 180 = 180 ÷ 10
= 18
5% of 180 = 18 ÷ 2 (as 5% is one half of 10%)
= 9
So 55% of 180 = 50% + 5%
= 90 + 9
= 99.
Andy served 99 good first serves.
2. A bag of flour normally holds 1kg of flour. In a special offer, the bag
has an additional 12 5⋅ % extra free. How much flour is there in this
bag?
10% of 1kg = 10% of 1 000g
= 1 000 ÷ 10
= 100g
1% of 1 000g = 1 000 ÷ 100 2% of 1 000g = 2 × 1%
= 10g so = 2 × 10
= 20g
0 5⋅ % = 1
2of 1%
= 10 ÷ 2
= 5g
Therefore,
12 5⋅ % = 10% + 2% + 0 5⋅ %
= 100 + 20 + 5
= 125g
In total there is 1 000g + 125g = 1 125g
= 1 125⋅ kg of flour in the bag.
24
Percentages on a Calculator
When calculating a percentage on a calculator we do not use the % button due to
inconsistencies between models. Instead, we convert the percentage to a decimal by
dividing it by 100.
Examples
1. A train company decides to decrease its prices by 4 5⋅ %. How much
would a journey which originally cost £16 35⋅ now cost?
4 5⋅ % of £16 35⋅ = 4 5 100 16 35⋅ ÷ × ⋅
= £ 0 74⋅ round money to the nearest penny.
The new price of the journey is £16 35⋅ - £ 0 74⋅ = £15 61⋅ .
2. A bank offer a savings interest rate of 2 3⋅ % p.a.. If £3 000 is
deposited in the savings account and no money is withdrawn, how
much would be in the account after two years?
(The abbreviation p.a. stands for per annum and refers to every year.)
First year: 2 3⋅ % of 3 000 = 2 3 100 3⋅ ÷ × 000
= £69
Total after first year is £3 000 + £69 = £3 069.
Second year: 2 3⋅ % of £3 069 = 2 3 100 3⋅ ÷ × 069
= £ 70 59⋅ to the nearest penny
Total after two years is £3 069 + £ 70 59⋅ = £3139 59⋅ .
Alternatively, once pupils are comfortable with the standard method outlined above
they may be introduced to the method of finding a single multiplier.
Examples Using the examples above,
1. New percentage = 100% - 4 5⋅ % Multiplier = 95 5⋅ % 100÷
= 95 5⋅ % so = 0 955⋅
New price = 16 35⋅ 0 955× ⋅
= £15 61⋅
2. New percentage = 100% + 2 3⋅ % Multiplier = 102 3⋅ % 100÷
= 102 3⋅ % so = 1 023⋅
Total at end of year one = 3000 1 023× ⋅
= £3069
Total at end of year two = 3069 1 023× ⋅
= £3139 59⋅
Or in one step,
Total at end of year two is
3000 1 023 1 023× ⋅ × ⋅
= 3000 21 023× ⋅
= £3139 59⋅ .
25
Rounding
Rounding a number allows us to approximate the size of the number.
When rounding, we consider the digit to the right of the place value we want to round.
If the digit to the right is
• 0, 1, 2, 3 or 4 then the digit we are rounding stays the same
• 5, 6, 7, 8 or 9 then the digit we are rounding increases by one.
Examples Round 2836 to the nearest 1000.
Consider place value: Th H T U
2 8 3 6 → 3 000
Similarly,
To the nearest 100, 2 836 → 2 800
To the nearest 10, 2 836 → 2 840
We can also round decimals to a specified number of decimal places (d.p.) using this
rule.
Examples
1. Gavin jumps 1 74⋅ m in the long jump. Round Gavin’s attempt to 1
decimal place.
1 74⋅ → 1 7⋅ m
2. Round 2 8617⋅ to (i) 2 decimal places and (ii) 3 decimal places.
(i) 2 8617⋅ → 2 86⋅ Two digits after the decimal point
(ii) 2 8617⋅ → 2 862⋅ Three digits after the decimal point
3. Round 31 96⋅ to 1 decimal place.
31 96⋅ → 32 0⋅
As the digit to the right of the thousands column is an 8
the 2 increases to a 3.
We want 1 digit after the
decimal point
The 9 in the tenths column rounds up to 1 unit. The zero remains
after the decimal point to show rounding to 1 decimal place.
26
Significant Figures
Significant figures (sig. figs) is another way of rounding which allows us to estimate
the size of a number. The more significant figures we round to, the more accurate the
number is.
To write a number to a specified number of significant figures we:
• Start at the first non-zero number and count along the specified number of
digits.
• Consider the next digit to the right and use the rounding rule outlined on page
25.
Examples
1. At last year’s Scottish cup final the attendance was 44 538.
To 1 sig fig 44 538 = 40 000
Similarly,
To 2 sig figs 44 538 → 45 000
To 3 sig figs 44 538 → 44 500
To 4 sig figs 44 538 → 44 540
2. Round 0 30495⋅ to 1, 2, 3 and 4 significant figures.
To 1 sig fig 0 30495⋅ → 0 3⋅
To 2 sig figs 0 30495⋅ → 0 30⋅
To 3 sig figs 0 30495⋅ → 0 305⋅
To 4 sig figs 0 30495⋅ → 0 3050⋅
Note that we do not “fill up” the columns to the right of the decimal with a zero as this
would indicate that they are significant.
first significant
figure
tells us how to round the
first significant figure
Significant figures start from the
first non-zero digit so the zero in
the units column here doesn’t
count.
first significant
figure
27
Scientific Notation
Scientific notation, sometimes also referred to as standard form, is a convenient way
of writing very large and very small numbers.
A number written using scientific notation looks like
56 2 10⋅ × .
The first part of the number (the coefficient) must lie between 1 and 10. We then
consider how many times we have to either multiply or divide the coefficient by 10
and this value becomes our index. If
• the index is positive, you multiply by 10 that number of times
• the index is negative, you divide by 10 that number of times.
The base is always 10 as this is the multiple we are considering.
Examples
1. At its closest, Venus is 38 000 000 km from Earth. Write this distance
using scientific notation.
38 000 000 = 3 8⋅ × 10 000 000
= 3 8⋅ × 10×10×10×10×10×10×10
= 73 8 10⋅ × km.
2. The diameter of a red blood cell is 0 0065⋅ cm. What is this number in
scientific notation?
0 0065 6 5 1 000
6 5 10 10 10
⋅ = ⋅ ÷
= ⋅ ÷ ÷ ÷
36 5 10−= ⋅ × cm.
3. The speed of light is 83 10× m/s. Write this number in normal form.
83 10 3 10 10 10 10 10 10 10 10× = × × × × × × × ×
= 300 000 000 m/s.
4. A molecule has length 101 5 10−⋅ × m. Write this number out in full.
101 5 10 1 5 10 10 10 10 10 10 10 10 10 10−
⋅ × = ⋅ ÷ ÷ ÷ ÷ ÷ ÷ ÷ ÷ ÷ ÷
0 00000000015= ⋅ m.
In Science you may find that the coefficient of a number written using scientific
notation is not always a single digit to accommodate commonly used prefixes. For
example, the wavelength of light can be 600 nanometres (nm) which is 9600 10−× m.
The 5 here is called the index.
coefficient base
28
Ratio
Ratios are used to compare the amounts of different quantities. To separate quantities
we use a colon, : . The order that we write a ratio is important.
Examples
1. There are five apples and six oranges in a bowl.
The ratio of apples to oranges is 5 : 6.
The ratio of oranges to apples is 6 : 5.
Sometimes it can be useful to use a table to ensure the ratio is in the
correct order.
apples : oranges oranges : apples
5 : 6 6 : 5
2. In an art tub there are 8 red pencils, 3 blue pencils and 1 green pencil.
The ratio of red : blue : green is 8 : 3 : 1.
Simplifying Ratios
We can simplify ratios in the same way as we simplify fractions by looking for the
highest common factor (HCF) of each of the terms. If no common factor exists then
the ratio cannot be simplified.
Examples
1. Simplify 36 : 8
36 : 8
= 9 : 2.
2. The colour turquoise is made by mixing 20 parts of blue paint with 10
parts of green paint. Write the ratio of blue to green paint in its
simplest form.
Blue : Green
20 : 10
= 2 : 1
3. In a bag of coins there are twelve 20p coins, thirty six 50p coins and
six £1 coins. Write the ratio of 20p coins to £1 coins to 50p coins in its
simplest form.
20p : £1 : 50p
12 : 6 : 36
2 : 1 : 6
HCF of 36 and 8 is 4 so divide both sides by
4.
HCF of 20 and 10 is 10
HCF of 12, 6 and 36 is 6
29
: :
:
Applications of Ratios
Ratios can be used to calculate unknown quantities or to distribute an amount
accordingly.
Examples
1. To make a diluting juice drink the manufacturers suggest the ratio of
concentrate to water is 1 : 5. How much concentrate is required for 30
litres of water?
concentrate water
1 5
6 30
Therefore, 6 litres of concentrate is required.
2. The ratio of a model plane to the actual plane is 1 : 50.
(a) If the model plane has a wing span of 20cm, what is the length
of the wing span on the real plane?
(b) The real plane has length 25m. What length is the model plane?
(a) model : real
1 : 50
20 : 1000
The wingspan of the plane is 1000cm = 10m.
(b) model : real
1 : 50
0 5⋅ : 25
The length of the model plane is 0 5⋅ m = 50cm.
3. A lottery win of £500 000 is shared amongst Janine, Mhairi and Sarah
in the ratio 3 : 5 : 2. How much does each person receive?
The ratio has to be split into 10 parts altogether (3 + 5 + 2 = 10) so
1 part = 500 000 ÷ 10
= £50 000.
The ratio tells us that Janine gets 3 parts = 3 50× 000 = £150 000;
Mhairi gets 5 parts = 5 50× 000 = £250 000 and Sarah gets 2 parts =
2 50× 000 = £100 000. It can be useful to show this in a table:
Janine : Mhairi : Sarah
3 : 5 : 2
150 000 : 250 000 : 100 000
20 1 20÷ = so we multiply both sides of the
ratio by 20. 20× 20×
0 5× ⋅ 0 5× ⋅ 25 50 0 5÷ = ⋅ so we multiply both sides of the
ratio by 0 5⋅ .
50× 000
6× 30 5 6÷ = so we multiply both sides of the
ratio by 6.
30
Proportion
If two quantities are directly proportional to each other then as the value of one
increases so does the value of the other.
Example One packet of crisps costs 48p. How much will 3 packets cost?
1 packet = 48p
so 3 packets = 3×48p
= 144p
= £1 44⋅ .
Sometimes it is necessary to work out the value of a single item before working out
multiple items.
Example A food label for Macaroni Cheese states that the energy released when
228g of food is burned is 250 kcal. How much energy is released when
17g of food is burned?
228 g = 250 kcal
1 g = 250 228÷
= 1 1⋅ kcal (to 1 decimal place)
17 g = 17 1 1× ⋅
= 18 7⋅ kcal.
If two quantities are inversely proportional to each other then as the value of one
increases the value of the other decreases.
Examples
1. It takes 3 men one hour to build a wall. Working at the same speed,
how long would it take 4 men to build the wall?
3 men = 60 minutes
1 man = 60 3× (it would take him 3 times as long on his own)
= 180 minutes
4 men = 180 4÷
= 45 minutes
2. Eight friends agree to pay £ 73 50⋅ each to rent a chalet for a week’s
holiday. At the last minute, one friend drops out and the remaining
seven has to share the bill. How much does each person have to pay?
8 people = £ 73 50⋅ each
Total cost = 8 73 50× ⋅
= £588
7 people = 588 7÷
= £84 each.
As the number of packets increase the price
also increases so the number of packets and the
price are directly proportional to each other.
As the number of men
decreases the length of
time increases so the
number of men and time
taken are inversely
proportional to each other.
31
Time Time Facts
Pupils have to recall basic time facts. For example,
1 year = 365 days (366 in a leap year)
= 52 weeks
= 12 months
The following rhyme may help to remember the number of days in each month:
“30 days has September, April, June and November
all the rest have 31 except February alone
which has 28 days clear and 29 in a leap year.”
12 and 24 hour clock
Time is measured using either the 12 or 24 hour clock. When using the 12 hour clock
a.m. represents from midnight to noon and p.m. from noon to midnight. Times written
using the 24 hour clock require 4 digits ranging from 00:00 to 23:59. Midnight is
expressed as 00:00; 12 noon is written as 12:00 and the hours thereafter are 13:00,
14:00, 15:00, etc until midnight.
Examples 12 hour 24 hour 6.03 a.m. 06:03
Noon 12:00
7.48 p.m. 19:48
Midnight 00:00
Time Intervals
We do not teach time as a subtraction, instead pupils are expected to “add on”.
Example How long is it from 08:40 to 13:25?
08:40 09:00 13:00 13:25
20 mins 4 hours 25 mins = 4 hours 45 minutes.
Converting Minutes to Hours
To convert from minutes to hours we write the minutes as a fraction of an hour.
Example Write 48 minutes in hours.
4848 60
60= ÷
Stopwatch Times
In general, stopwatches read hours : minutes : seconds . hundredths of a second.
Example
This stopwatch reading represents a time of 2 hours 34 minutes
53 seconds and 91 hundredths of a second (not milliseconds!).
= 0 8⋅ hours
02 : 34 : 53 . 91
32
Angles
The size of an acute angle is between 0o and 90
o. An angle between 90
o and 180
o is an
obtuse angle and a reflex angle is between 180o and 360
o.
In general, 3 letters are employed to name an angle and the sign ∠ is used.
We would name this angle either ∠ ABC or ∠ CBA. The lines AB and
BC are called the arms of the angle and B is the vertex. This means that
B must be the middle of the three letters, however it doesn’t matter
whether A is first or C.
Complementary angles add up to 90o and supplementary angles add up to 180
o.
Angles which are vertically opposite each other are equal. Moreover, for parallel
lines, corresponding and alternate angles may exist (sometimes referred to as F and Z
angles, respectively). Below, equal angles are marked with the same symbol.
Measuring Angles
In Science pupils are expected to investigate what happens to light when it is reflected
off a surface. To do this it is important that pupils can measure angles accurately. To
measure an angle we use a protractor; it is important that the centre of the protractor is
placed at the vertex of the angle. We then turn the protractor so that one half of the
bottom line is along an arm of the angle (whilst the centre remains at the vertex).
Counting from zero we work round the scale until the other arm is reached.
Example Find the size of angle x.
A Right angle
is 90o.
A Straight
angle is 180o.
One complete turn (or
revolution) is 360o.
A
B C
A
B C
D ∠ ABD and ∠ CBD
are complementary E
F G
H ∠ EFH and ∠ GFH
are supplementary
xo
Centre of protractor on vertex
Turn protractor to
one arm of angle
Reading from
scale x = 52o.
Vertically Opposite Corresponding Alternate
33
Coordinates
A coordinate point describes the location of a point with respect to an origin. A
Cartesian plane consists of a horizontal axis (x-axis) and a vertical axis (y-axis).
Where the two axes meet is the origin.
Important Points
• A ruler should be used to draw the axes and they should be clearly labelled.
• For a two-dimensional coordinate point the first number describes how far
along the x-axis the point is and the second refers to how far it is up or down
the y-axis.
• Coordinate points are enclosed in round brackets and the two numbers are
separated by a comma.
• If a letter appears before a coordinate point then we can label the point once it
has been plotted.
• The origin corresponds to the point (0, 0).
• Positive numbers are to the right of the origin on the x-axis and above the
origin on the y-axis.
• Numerical values should refer to a line – not a box.
• Each axis must have equal spacing from one number to the next.
Example Plot the coordinate points A(2, 3), B(-3, 1), C(-2, -4), D(4, -2).
It is shown that the axes split the coordinate plane in to 4 separate areas. These areas
are known as quadrants. The first quadrant is the top right-hand section; the second
quadrant is the top left-hand section; the third quadrant is the bottom left-hand section
and finally the fourth quadrant is the bottom right-hand section.
0 1 2
-2
1
2
3 -1
-1
-2
3
-3
-3
-4
-4
4
4 x
y
A
B
C
D
Along 2
and up 3
Along -3
and up 1
Along -2 and down 4
Along 4 and
down 2
34
Scale and Grid References
In Geography pupils will be expected to read maps. It is important that they are
familiar with scale and grid references.
Scale A scale describes how an object has been produced on paper in comparison to the
object in real life. There are four main ways of expressing a scale: a line scale; as a
representative fraction; as a statement or as a visual comparison.
Examples 1. A Line Scale:
Measuring this line with a ruler we see that 1cm on the ruler would
represent 250km in real life.
2. A Representative Fraction: 1 : 50 000
This reads that every 1cm on the map is 50 000cm in real life.
3. A statement: “4cm on the map represents 1km on the ground”.
4. A visual comparison is similar to the line scale, except a ruler would
also be provided to illustrate the 1cm.
Grid References Grid references are similar to coordinates in that they describe the position of an
object. A map will be divided into separate sections by a grid and to write the grid
reference find the vertical grid line (Easting) followed by the horizontal grid line
(Northing). Combining these two values in that order yields the grid reference. (The
four-figure grid reference represents the bottom left-hand corner of the square being
referenced.)
Examples
0 500 1000
km
Eastings 26 21 22 23 24 25 35
36
37
38
39
40
2137
2236
2535
2338
2538
Northings
Four-figure grid references Six-figure grid references Read the grid reference as before except now
split each box into tenths, measure the tenths
and add it on to both Eastings and Northings.
21 22 37
38
213377
three tenths along from 21
seven tenths up from 37
35
Information Handling – Averages
In statistics we are often given various pieces of information, known as a data set, and
asked to describe what the information is showing us. One way of doing this is by
calculating the averages of the data set via the mean, the median and the mode. Note
that, depending on the data, it is not always possible to calculate all three.
Mean
To calculate the mean we add all the data together and then divide by how many
pieces of data there are.
Median
The median is the middle number of a data set once the data is written in order. If
there is an even number of data then the median is the mean of the two middle values.
Mode
The mode is the piece of data which occurs the most often.
It can also be advantageous to calculate the range (largest value subtract smallest
value) for a data set.
Example An author’s book was examined for sentence length. From the nine
sentences picked at random they were found to have the following
number of words in them:
12 14 9 21 16 12 8 13 12.
Calculate the mean, median, mode and range of the sentence lengths.
Mean = 12 14 9 21 16 12 8 13 12
9
+ + + + + + + +
= 117
9
= 13.
Writing the data in order we have
8 9 12 12 12 13 14 16 21
So the median value is 12 (the fifth value along).
The most frequent length is 12, occurring three times, so the mode is
also 12.
The range of lengths is 21 – 8 = 13.
36
Types of Graphs
In this booklet we consider various types of graphs that a pupil may see. Irrespective
of type, all graphs should be drawn using a ruler, have a title and two axes. The axes
should be clearly labelled and have equal spacing along them.
It is often difficult to decide which type of graph to use for a set of data and different
subjects prefer different graphs for their own reasons. In Mathematics, the graph used
depends on the type of data given; discrete data or continuous data.
Discrete Data
A discrete data set contains values which are based on a distinct number. Examples of
discrete data include number of goals scored or number of pupils in a class – you
cannot have half a goal or half a pupil.
Bar graphs are the most common way of illustrating discrete data.
Continuous Data
A continuous data set comprises values which are measured and can be illustrated on
a continuous scale. Examples of continuous data include temperature, speed and
distance.
Histograms and line graphs are the most common ways of illustrating continuous data.
Bar Graphs
A bar graph is a good way of demonstrating the frequency (or amount) of different
categories within a set of data.
Example This bar graph illustrates the favourite genre of music given by 80 S1
pupils.
0
5
10
15
20
25
30
35
1 2 3 4 5
In a bar graph, a space should be left before the first bar and then between each bar
thereafter. The bars should all be of equal thickness as should the spaces between
them.
Country Rock Pop Dance Classical
Favourite Genre of Music
Nu
mb
er o
f P
up
ils
Music Genre
37
Day of the week
0
1
2
3
4
5
6
7
8
9
10
1 2 3 4 5 6 7 8 9 10
Histograms
Example This histogram illustrates the maximum temperatures recorded at
Machrihanish weather station for a week in December.
Unlike bar graphs, in histograms no space is left at the start or between bars.
Line Graphs
Line graphs comprise a series of points which can then be joined by a line.
Example A seedling was planted and the height of the seedling measured every
week. This line graph illustrates the results recorded.
Trend
Line graphs are particularly useful when describing the trend of a set of data. From
the example above we may say
“The seedling has grown every week. Between weeks 4 and 6 the line is at its steepest
so the quickest growth occurred at this time. From weeks 7 to 10 the amount of
growth gradually slows down.”
0
2
4
6
8
10
12
14
Tem
per
atu
re (
oC
)
Mon Tue Wed Thu Fri Sat Sun
Maximum Temperatures
Height of seedling measured weekly
Week
Hei
gh
t (c
m)
38
0
5000
10000
15000
20000
25000
30000
0 2 4 6 8 10
100
110
120
130
140
150
160
170
180
190
0 5 10 15 20
Scatter Graphs
Scatter graphs can be used to display the relationship between two variables.
Example This table shows the average speed of different aged pupils running
100 m.
Illustrate this data in a scatter graph.
Correlation
We may describe the trend of a scatter diagram by looking for a correlation. The
example above exhibits a positive correlation because, in general, as the age of the
runner increases the average speed also increases.
A negative correlation occurs if an increase in one variable leads to a decrease in the
other. If two variables do not appear to follow any pattern then we say there is no
correlation.
Examples
Age
(years) 12 5 8 10 11 12 15 14 18 9
Speed
(m/s) 5 2 4 4 6 6 6 7 8 5
0
1
2
3
4
5
6
7
8
9
0 5 10 15 20
Age (years)
Av
erag
e S
pee
d (
m/s
)
Running 100m
Value of Car
Val
ue
(£)
Age of Car (Years) Mark (Out of 20)
Hei
gh
t (c
m)
Test Mark
Negative
Correlation
No Correlation
39
0
1
2
3
4
5
6
7
0 0.05 0.1 0.15 0.2 0.25 0.3 0.35
Line of Best Fit
A line of best fit can be added to a scatter diagram to emphasise a correlation. The
aim is to get roughly the same number of points either side of the line. This can prove
difficult at times so in Mathematics we find it useful to calculate the mean value (see
page 35) of the variables and let the line pass through this point. (In some subjects,
however, the mean value is not considered.)
Example In Physics, pupils recorded the following results when measuring
voltage against current for a fixed resistor.
Voltage (V) 5 95⋅ 4 60⋅ 3 59⋅ 3 28⋅ 2 90⋅ 2 55⋅ 2 35⋅ 2 08⋅
Current (A) 0 31⋅ 0 24⋅ 0 18⋅ 0 16⋅ 0 15⋅ 0 13⋅ 0 11⋅ 0 10⋅
In this example we have approximately three points above the line, three points below
the line and two on the line. We also find that this line of best fit passes through the
origin (0, 0); this is not always the case.
Estimation
Once a line of best fit has been drawn we can use it to estimate values of the variables.
Example Estimate the voltage when the current is 0 06⋅ A and the current for a
voltage of 5 5⋅ V.
The dotted lines added to the graph show that for a current of 0 06⋅ A
the corresponding voltage is approximately 1 3⋅ V. Similarly, for a
voltage of 5 5⋅ V, the current is roughly 0 27⋅ A.
This data results from an experiment used to investigate Ohm’s Law, V = IR, where I
is the current and R is the resistance of the conductor. Using techniques outwith the
scope of this booklet would allow the equation of the line of best fit to be calculated
and then subsequently used for further calculations.
Mean point Vo
ltag
e (V
)
Current (A)
Voltage against current for a fixed resistor
Line of Best Fit
40
Leisure
Sleep
School
90 1
360 4= and
1
4of 24 = 24 4÷
= 6.)
Reading Pie Charts
A pie chart comprises a circle divided into separate sectors. Each sector represents a
different category from the data set.
One complete revolution, or the angle round the centre of the circle, measures 360o.
We calculate the size of each sector by measuring its angle with a protractor and
finding the associated fraction.
Example This pie chart illustrates how a student spends his day. How much time
does he dedicate to each activity?
Leisure
The angle measures 162o. As there are 24 hours in a day the length of
time the students spends on leisure time is
16224 10 8
360× = ⋅ hours
= 10 hours 48 minutes.
School
The angle measures 108o, so time spent in school is
10824 7 2
360× = ⋅ hours
= 7 hours 12 minutes.
Sleep
The angles measures 90o, so time spent sleeping is
9024 6
360× = hours
(We could have simplified this calculation via our fraction knowledge:
41
Equations
An equation is a mathematical statement linking two things which are equal. When
dealing with an equation it is important that it remains equal (or balanced) at all times,
i.e. if you change one side then you must do the same to the other side so that both
sides remain the same. There should only be one equals sign on every line of an
equation and they should be aligned one above the other.
It is a good idea to check an equation by substituting the final answer back in to the
original problem.
Examples Solve for x: (This means you want x on its own.)
1. 2 3 21x + =
2 3 21x + = (Balance by subtracting 3 from both sides)
2 18x = (Balance by dividing both sides by 2)
9x = (Final answer)
Check: LHS = 2 9 3× +
= 21
= RHS so correct
2. 4 7 37x − =
4 7 37x − = (Add 7 to both sides)
4 44x = (Divide both sides by 4)
11x =
Check: LHS = 4 11 7× −
= 37
= RHS so correct
3. 3 5 15x x− = +
3 5 15x x− = + (Subtract x from both sides)
2 5 15x − = (Add 5 to both sides)
2 20x = (Divide both sides by 2)
10x =
Check: LHS = 3 10 5× − RHS = 10 15+
= 25 = 25 LHS = RHS so correct.
42
Formulae
Evaluating Formulae
To evaluate a formula we substitute numbers in for letters.
Examples
1. In Science pupils will learn thatF
PA
= , where P is pressure (in Pascals,
Pa), F is the force exerted (in Newtons, N) and A is the area over which
the force is applied (in square metres, m2). What is the pressure caused
by an 8N box with base area of 20 m2
being placed on a table?
Here, F = 8 and A = 20, so F
PA
=
8
20P =
0 4P = ⋅ Pa.
2. The formula to convert temperature from degrees Celsius, C, to
Fahrenheit, F, is 1 8 32F C= ⋅ + . What temperature is 20oC in
Fahrenheit?
In this example, C = 20 so 1 8 32F C= ⋅ +
1 8 20 32= ⋅ × +
= 68 oF.
Rearranging Formulae
To change the subject of a formula is to rearrange it to have a different letter on its
own on one side of the equation. To rearrange a formula we “work backwards”,
ensuring that the formula remains balanced at all times.
Examples
1. For 1 8 32F C= ⋅ + , make C the subject of the formula.
1 8 32F C= ⋅ + (subtract 32 from both sides)
32 1 8F C− = ⋅ (divide both sides by 1 8⋅ )
( )32 1 8F C− ÷ ⋅ =
( )32 1 8C F= − ÷ ⋅ or 32
1 8
FC
−=
⋅
2. Make c the subject of the formula 2 2 2a b c= + .
2 2 2a b c= + (subtract 2
b from both sides)
2 2 2a b c− =
2 2c a b= ± −
(Write new subject of the formula
on LHS of equation)
(Take the square root of both sides
recalling that either a positive or
negative solution may exist.)
43
Measurement
It is important that pupils are familiar with different units relating to measure whether
it be lengths, weights or volumes.
Length
In Home Economics pupils are expected to measure materials for practical craft work.
In Design and Technology, measurements are always given in millimetres (mm). For
example, this is an orthographic drawing of a basic CCTV camera illustrating the
level of detail and accuracy expected from pupils.
Conversions of length
Other length measurements include centimetre (cm), metre (m) and kilometre (km).
(The prefixes ‘milli’, ‘centi’ and ‘kilo’ refer to one thousandth, one hundredth and one
thousand, respectively, and can be applied to many situations in Mathematics and
Numeracy.)
1cm = 10 mm 1m = 100 cm 1km = 1 000 m
= 1 000 mm = 100 000 cm
= 1 000 000 mm.
Pupils should be able to identify sensible units to use when describing everyday
objects, i.e.
length of pencil millimetres
width of desk centimetres
running track metres
Glasgow to Aberdeen kilometres.
Conversions of Weight and Volume
In Home Economics, practical work is undertaken using various weight and volume
measures. Examples include using scales, spoon sizes and jugs to measure in grams
(g), millilitres (ml) and litres (l). It is convenient to know the following conversions.
1 ml = 1 cm3, 1000 g = 1 kg,
1000 ml = 1 litre, 1000 kg = 1 tonne.
44
Applications of Measurement
In Design and Technology pupils will learn that when designing pages intended to
promote a product, or to be visually attractive, the rule of thirds is the most common
starting point. This process involves measuring the page (which can be either
landscape or portrait) and dividing it by three, that is, into thirds. The imaginary lines
and grid this process creates provide the most visually important areas of the page.
The positions where the grid lines intersect (cross over) are the most powerful points
on the page – as illustrated in the following diagrams.
In the Tag Heuer example below, we can see how Brad Pitt’s mouth lies close to the
1st vertical third, which is no surprise because we are supposed to feel that he is
telling us about the product, in this case a watch. The main watch image and the
company logo lie close to the 2nd vertical third. Similarly, the Nescafe jar is placed on
the 1st vertical third here while the bulb (representing the special aroma, with its links
to perfume) lie along the horizontal third.
In Art and Design, the rule of thirds is referred to when discussing approaches to
layout in Graphic Design and composition in drawings, paintings and photography.
Art composition rules provide a starting point for deciding on a composition for a
painting and for deciding where to put things, but it should be remembered that in Art
and Design these should be seen more as guidelines than set rules and that the most
creative and dramatic effects can sometimes be achieved by breaking them. Still, it is
important to know the rules to be able to break them effectively.
The Rule of Thirds is the easiest art composition rule to follow in a painting, while
also being hugely popular among photographers. Applying the rule of thirds to a
45
painting means you'll never have a work of art that is split in half, either vertically or
horizontally, or one with the main focus right in the centre like a bull's-eye.
How does the Rule of Thirds work for composition?
Quite simply, divide a canvas in thirds both horizontally and vertically, and place the
focus of the painting (focal point) either one third across or one third up or down the
picture, or where the lines intersect (called ‘power points’ by photographers and
cinematographers).
What Difference Does the Rule of Thirds Make?
Take a look at these two images of a painting called “The Incredulity of St. Thomas”
1601-02. In the one on the left, your eye is drawn straight into the centre of the
painting and you tend to ignore the rest of the picture. In the one on the right, where
the focal points of the face of Christ and the two hands are on two of the Rule of
Thirds 'power points', your eye is drawn to these, then around the image following the
curve of the composition. The image on the right is the original version.
In Art and Design, pupils will also make use of grids to judge proportion when
drawing an object. It is imperative that all measurements undertaken are exact and
each grid is a square, as a grid which has different sized boxes in it can lead to a
distorted looking picture.
When working from a photograph, pupils will superimpose a grid onto it using
Photoshop on the computer (see below). This could also be measured and drawn
manually using a ruler.
Pupils may then focus on one box at a time as a guide to the proportions required for
their own drawing.
46
Historical Context
Centuries before photography was around, artists like Leonardo Da Vinci and
Albrecht Durer used grids in a similar way to achieve accuracy in the proportions of
their drawings. Their grids were set in three dimensional rectangular wooden frames
with wires, threads or strings running horizontally and vertically to build up the grid.
These framed grids were then placed between the artist and the subject being drawn.
This technique was used for portrait, still-life and landscape work and was partly
responsible for the huge improvements in the accuracy of perspective and proportions
in drawings and paintings during the Renaissance period 1400s – 1500s.
Durer had a wire grid standing in front of him, and a similar grid drawn on a paper.
Looking at the subject through the grid, he saw one part of the subject through each
square of the grid. He then drew in each square on the paper exactly what he saw
through each square of the wire grid. This process can be seen in the detail from his
etching "Draftsman Making a Perspective Drawing of a Woman", 1525.
Since then many artists have made use of grid techniques wherever accuracy is
desired or required. One of the most famous contemporary artists to make notable use
of the grid system is Chuck Close, who is one of the first ‘Photorealist’ artists. This
means that he wants to make his paintings so realistic that you would not be able to
tell whether they are photographs or paintings. The grid system makes this possible.
Look at the examples below. The image on the left is the photographic resource that
was used to paint his famous self portrait – “Big Self-Portrait”, 1967-68; you can just
make out the grid that he drew onto it. The finished painting is on the right.
47
Glossary of Terms
(Mathematical Literacy)
Word(s)
Symbol/
abbreviation
(if any)
Meaning
Acute Angle An angle between 0o and 90
o.
Add/Addition + To combine two or more numbers to get one.
Ante meridiem a.m. Any time in the morning (between Midnight and Noon).
Approximate A result that is nearly but not exact.
Average A number which represents a set of data.
Axes The lines that make a graph’s framework.
Calculate To work out an answer (not necessarily with a calculator!).
Carrying Taking a digit to the next column when the number in one column
is greater than 9.
Common
Denominator
A number that all the denominators for two or more fractions
divide into exactly.
Coordinates A set of numbers that illustrate a point on a graph.
Continuous Data Data consisting of measurements.
Correlation A connection between two things.
Data A collection of facts, numbers, measurements or symbols.
Decimal Point . A point that separates a whole number from a part of a number.
Deduct - Another word for subtract.
Degree o A unit for measuring angles.
Denominator The number written below the line in a fraction, illustrating how
many parts are in one whole.
Difference - Another word for subtract.
Digit Numerals 0 to 9 are called digits.
Discrete Data A set of data which is based on counting whole objects.
Divisible A number is divisible by another number if, after dividing, there is
no remainder.
Divide ÷, / Split a quantity into smaller, equal groups.
Divisor The number which to divide by.
Equal = Identical in amount, or quantity.
Equation A statement that links two equal quantities.
48
Equivalent
Fractions Fractions which have the same value.
Estimate A rough or approximate calculation.
Evaluate Find the value of.
Factor A whole number that can be divided exactly into a given number.
Finite Anything that can be counted or has boundaries.
Formula An equation that uses symbols to represent a statement.
Fraction A part of a whole quantity or number.
Frequency The number of times something happens.
Improper
Fraction
A fraction where the numerator is bigger that the denominator.
Integers Positive or negative whole numbers including zero.
Least The smallest thing or amount in a group.
Length How long an object is from end to end.
Lowest Common
Denominator
(LCD) The lowest number that can be divided exactly by the denominators
of two or more fractions.
Lowest Common
Multiple
(LCM) The lowest number that can be divided exactly by two or more
numbers.
Maximum The largest value.
Mean The average of a set of scores.
Median The middle number when a data set is arranged in order of size.
Minimum The smallest value.
Minus - Another word for subtract.
Mixed Number A whole number and a fraction.
Mode The data which appears the most often in a data set.
Most The greatest amount.
Multiple A number that can be divided exactly by a given number.
Multiply ×, * To combine an amount a given number of times.
Negative
Numbers
A number less than zero.
Numerator The top number of a fraction.
Numeral A symbol used to represent a number.
Obtuse Angle An angle bigger than 90o but less than 180
o.
Operations +, -, ×, ÷ The four arithmetic operations are addition, subtraction,
multiplication and division.
49
Percent % A number out of 100.
Place Value The position of a digit within a number.
Plus + Another word for add.
Post Meridiem p.m. Any time in the afternoon or evening (between Noon and
Midnight).
Product The answer to a multiplication.
Proper Fraction A fraction where the numerator is less than the denominator.
Protractor An instrument used to measure and draw angles.
Quadrants The spaces between the x-axis and y-axis on a Cartesian coordinate
plane.
Quotient The answer to a division.
Range The difference between the largest and smallest number in a set.
Ratio : A way of comparing two quantities.
Reflex Angle An angle greater than 180o.
Remainder The amount left over when a number does not divide exactly into
another number.
Revolution One complete turn.
Right Angle An angle measuring exactly 90o.
Rounding Writing a number as an approximation.
Scale Equally spaced markings on a measuring device.
Scientific
Notation
A quick and easy way of writing very large or very small numbers
using powers of 10.
Significant
Figure
A digit in a number that is considered important when rounding.
Simplify To write in the simplest, shortest form.
Solution The answer to a problem or question.
Solve Find the answer.
Straight Angle An angle of exactly 180o.
Substitution Replacing a letter with a number.
Subtract - Take one quantity away from another to find what is left.
Sum The answer to an addition problem.
Times Another word for multiplied by.
Total Another word for sum.
Vertex A point where two lines meet to form an angle.