Numatics G3 Numatics G3 Fieldbus ElectronicsFieldbus ElectronicsHow to Order

-2-

What’s different when ordering G3?What’s different when ordering G3?With G3 there are three basic configurations in the platform:

1. Main fieldbus manifold with or without I/O

2. Sub-Bus Valve manifoldwith or without I/O

3. Sub-Bus I/O assembly

Sub-bus

Sub-bus

Sub-

bus

NetworkMain Manifold

Sub-Bus ManifoldWith I/O & Valves

Sub-Bus ManifoldWith Valves

I/O Only

1.

2.

3.

-3-

G3 Ordering OverviewG3 Ordering Overview When ordering a configuration with valves the order format begins

with an “AK” number consistent with all previous valve platforms. The valves associated are listed by station below the AK part

number.– Ex: AK3ED00003LSTD

Station 1 052BB4Z2ML00061 Station 2 052BA4Z1ML00061

etc. etc. When it comes to the “G3 electronics” the G3 platform uses a

“G3”number similar to the “NX” number used in G2-2 or G2-1. The primary difference is that the “G3” number indicates the number

of I/O modules in the assembly where in previous platforms the NX number indicated the number of I/O points.– Ex: G3EP116R0STD (G3 allow up to 16 I/O modules!)

The I/O modules are listed below the G3 number by station just like in G2-2 or G2-1.

-4-

Ordering Example:Ordering Example:Fieldbus Valve Manifold AssemblyFieldbus Valve Manifold Assembly

Example:AK3EF00003NDRM

051BA4Z2MN00061051BA4Z2MN00061051BA4Z2MN00061051BB4Z2MN00061051BB4Z2MN00061051BB4Z2MN00061G3PT102D0DRM240-205240-212

Assembled

“AK” (blue)– Includes valve driver and

end plates Valves listed by station from left

to right facing the cylinder port side of the manifold

“G3” (Pink)– Includes: clips, node, ARM

and sub-bus out module. List I/O part numbers from right

to left facing the cylinder port side of the manifold

-5-

Ordering Example:Ordering Example:Sub-Bus Valve Manifold AssemblySub-Bus Valve Manifold Assembly

Example:AK3EF00003NDRM051BA4Z2MN00061051BA4Z2MN00061051BA4Z2MN00061051BB4Z2MN00061051BB4Z2MN00061051BB4Z2MN00061G3DS203D0DRM240-207

Assembled

“AK” (blue)– Includes valve driver and

end plates Valves listed by station from left

to right facing the cylinder port side of the manifold

“G3” (Pink)– Includes: clips, node, sub-

bus valve module and sub-bus out module.

List I/O part numbers from right to left facing the cylinder port side of the manifold

-6-

Ordering Example:Ordering Example:Sub-Bus I/O AssemblySub-Bus I/O Assembly

Example:G3DS302R0DRM240-207240-107 Assembled

No “AK” part number “G3” part number (pink)

• Includes clips• Sub-Bus In• Sub-Bus Out

List I/O part numbers from right to left facing configuration with the display at the top of the assembly.