Novoflex samengesteld productoverzicht_eng
-
Upload
transcontinenta-bv -
Category
Documents
-
view
220 -
download
1
description
Transcript of Novoflex samengesteld productoverzicht_eng
Adapters
ADAPTERS_
ADAPTER RINGS | adjustment to infinity with all adapters
___
_
_
_
_
NOVOFLEXN
NOVOFLEX Präzisionstechnik GmbHBrahmsstraße 7, D-87700 MemmingenTelefon +49 8331 88 888, Fax +49 8331 47 [email protected], www.novoflex.de
WITH cOMPLIMENTS
910/
E/04
.11/
AD
APPLIcATION EXAMPLES
OPTIONAL AccESSORy: ASTAT NEXPRODUcT INFORMATION
noVofle X offers a large variety of high precise fine mechanic adapters to connect lenses andcameras of different manufacturers. with all adapters and/or adapter combinations infinity adjustment of the lens is possible. none of the adapters will transfer any function from the camera body to the lens. with almost all cameras automatic exposure metering (stop-down metering/aperture priority) is possible.
all adapters are machined high precisely to ensure the correction of the flange focal length differences.
the adapter models mft/niK, mft/min-af, mft/pent, neX/niK, neX/min-af, neX/pent, nX/niK,nX/min-af, nX/pent and eos/niK nt (for nikon, sony alpha / minolta af and pentax K lenses) are equipped additionally with a stepless f-stop control ring and can therefore be used with lenses that do not come with a built-in manual aperture control ring.
when mounting long or heavy lenses to sony neX cameras, we recommend the use of the adapter collar astat-neX to relieve the strain from the camera body thread.the astat-neX can be mounted on any 1/4“ and 3/8“ thread or to the noVofleX Q dovetail quick release system (arca compatible).
please note that due to technical reasons only certain camera-lens combinations are possible.see page 2 for the most common adaptions. for a complete overview of all available models visit the „adapter finder“ at www.novoflex.com
Adapters
cAMERA TO LENS ADAPTER
Samsung NX | Canon fd | nX/Can
Samsung NX | Contax/yashica | nX/Cont
Samsung NX | leica r | nX/ler
Samsung NX | m 42 | nX/Co
Samsung NX | minolta af/sony | nX/min-af*
Samsung NX | minolta md | nX/min-md
Samsung NX | nikon | nX/niK*
Samsung NX | olympus om | nX/om
Samsung NX | pentax K | nX/pent*
Samsung NX | t2 | nX/t2
canon FD | hasselblad | harinG + Cana
canon EOS | hasselblad | harinG + Cana-af
M42 | hasselblad | harinG + Coa
contax/yashica | hasselblad | harinG + Conta
Leica R | hasselblad | harinG + lea-r
Minolta MD | hasselblad | harinG + mina
Minolta AF | hasselblad | harinG + mina-af
Nikon | hasselblad | harinG + niKa
Olympus OM | hasselblad | harinG + oma
Pentax K | hasselblad | harinG + penta
Rollei SL35 | hasselblad | harinG + rola
Samsung NX | hasselblad | harinG + nXa
contax 645 | hasselblad | Contha 645
FourThirds | hasselblad | harinG + oma-diGi
MicroFourThirds | hasselblad | harinG + mfta
canon FD | mamiya 645 | mamrinG + Cana
canon EOS | mamiya 645 | mamrinG + Cana-af
M42 | mamiya 645 | mamrinG + Coa
contax/yashica | mamiya 645 | mamrinG + Conta
Leica R | mamiya 645 | mamrinG + lea-r
Minolta MD | mamiya 645 | mamrinG + mina
Minolta AF | mamiya 645 | mamrinG + mina-af
Nikon | mamiya 645 | mamrinG + niKa
Olympus OM | mamiya 645 | mamrinG + oma
Pentax K | mamiya 645 | mamrinG + penta
Rollei SL35 | mamiya 645 | mamrinG + rola
Samsung NX | mamiya 645 | mamrinG + nXa
FourThirds | mamiya 645 | mamrinG + oma-diGi
MicroFourThirds | mamiya 645 | mamrinG + mfta
canon FD | pentax 67 | pentrinG 67 + Cana
canon EOS | pentax 67 | pentrinG 67 + Cana-af
M42 | pentax 67 | pentrinG 67 + Coa
contax/yashica | pentax 67 | pentrinG 67 + Conta
Leica R | pentax 67 | pentrinG 67 + lea-r
Minolta MD | pentax 67 | pentrinG 67 + mina
Minolta AF | pentax 67 | pentrinG 67 + mina-af
Nikon | pentax 67 | pentrinG 67 + niKa
Olympus OM | pentax 67 | pentrinG 67 + oma
Pentax K | pentax 67 | pentrinG 67 + penta
Rollei SL35 | pentax 67 | pentrinG 67 + rola
Samsung NX | pentax 67 | pentrinG 67 + nXa
FourThirds | pentax 67 | pentrinG 67 + oma-diGi
MicroFourThirds | pentax 67 | pentrinG 67 + mfta
cAMERA TO LENS ADAPTER
canon EOS | leica r | eos/ler
canon EOS | nikon | eos/niK
canon EOS | nikon | eos/niK nt*
canon EOS | m42 | eos/Co
FourThirds | m42 | ft/Co
FourThirds | Contax/yashica | ft/Cont
FourThirds | leica r | ft/ler
FourThirds | nikon | ft/niK
FourThirds | olympus om | ft/om
FourThirds | pentax K | ft/pent
FourThirds | t2 | ft/t2
MicroFourThirds | Canon fd | mft/Can
MicroFourThirds | Contax/yashica | mft/Cont
MicroFourThirds | leica m | mft/lem
MicroFourThirds | leica r | mft/ler
MicroFourThirds | m42 | mft/Co
MicroFourThirds | minolta af / sony | mft/min-af *
MicroFourThirds | minolta md | mft/min-md
MicroFourThirds | nikon | mft/niK *
MicroFourThirds | olympus om | mft/om
MicroFourThirds | pentax K | mft/pent *
MicroFourThirds | t2 | mft/t2
Sony NEX | Canon fd | neX/Can
Sony NEX | Contax/yashica | neX/Cont
Sony NEX | leica m | neX/lem
Sony NEX | leica r | neX/ler
Sony NEX | m42 | neX/Co
Sony NEX | minolta af / sony | neX/min-af *
Sony NEX | minolta md | neX/min-md
Sony NEX | nikon | neX/niK *
Sony NEX | olympus om | neX/om
Sony NEX | pentax K | neX/pent *
Sony NEX | t2 | neX/t2
Leica M | Canon fd | lem/Can
Leica M | m42 | lem/Co
Leica M | Contax/yashica | lem/Cont
Leica M | leica r | lem/ler
Leica M | minolta md | lem/min
Leica M | nikon | lem/niK
Leica M | olympus om | lem/om
Leica M | pentax K |lem/pent
canon XL | Canon fd | Xl-Can
canon XL | m42 | Xl-Co
canon XL | Contax/yashica | Xl-Cont
canon XL | leica r | Xl-ler
canon XL | minolta md | Xl-min
canon XL | nikon | Xl-niK
canon XL | olympus om | Xl-om
canon XL | pentax K | Xl-pent
* with stepless f-stop control ring; can be used also with lenses that do not come
with a built-in manual aperture control ring technical specifications subject to change without notice.
FourThirds = i.e. olympus e-system, panasonic lumix l, leica digilux
MicroFourThirds = i.e. olympus pen, panasonic lumix G …
The classic route to macro and micro photography is via a bellows. The automatic bellows BALCAN-AF was designed for the use with Canon EOS cameras and lenses and transfers all functions between the camera and the lens.
PRODUCT INFORMATION
TECHNICAl sPECIFICATIONs
Automatic bellows for Canon EOs
NOVOFLEXN
Order code: | BALCAN-AFsize: | h = 110 mm (4.33") | b = 80 mm (3.14") | total lenght = 134 mm (5.27")Minimum extension: | 50 mm (1.96")Maximum extension: | 130 mm (5.11")Travel slide: | 65 mm (2.55")Max. ø lens: | 80 mmWeight: | 430 g (0.94 lbs)
Technical specifications subject to change without notice.NOVOFlEX Präzisionstechnik GmbHBrahmsstraße 7, D-87700 MemmingenTelefon +49 8331 88 888, Fax +49 8331 47 [email protected], www.novoflex.de
WITH COMPlIMENTs
MACRO ACCEssORIEs_
BAlCAN-AF | AUTOMATIC BELLOWS
___
_
_
_
_
610/
D/0
6.05
/AD
Ball heads NQ | 40 | 30 | 19
NOVOFLEX
N
NOVOFLEX Präzisionstechnik GmbHBrahmsstraße 7, D-87700 MemmingenTelefon +49 8331 88 888, Fax +49 8331 47 [email protected], www.novoflex.de
WiTH cOMPLiMENTs
160/
D/0
4.11
/AD
BALL HEADs_
BALL NQ | Ball head | Q=MOUNT | Q=SYSTeM
BALL 30 | Ball head | UNikleM | BaSiCBall
BALL 40 | Ball head | UNikleM | BaSiCBall
___
_
_
_
_
BALL NQ | BALL 30 | BALL 40 The Novoflex Ball NQ ball head is a classic ball-and-socket head that‘s designed for ultimate precision and stability. The Ball NQ is intended for studio or outdoor photography – its corrosion-free materials ensure that it will survive any elemental rigors. The low-profile head measures only 3.1“ high yet supports loads up to 15.5 lb.The easy-to-move ball permits a 360° rotation. The ball can be locked in any desired position by means of a winged screw. an integrated level helps to align the camera precisely in the right position. a peculiarity is the lubricant- free seat of the ball, which prevents fast retention. Furthermore, the corrosion-free materials make the universally applicable tripod head a true outdoor tool. The ball head is equipped with a camera quick-release Q-Mount.The two ball heads 30 and 40 (Ball 30 / Ball 40) easily prove their stability and high precision. The pan rotation over 360°is locked with a knob. The ball head 30 (Ball 30) holds equipment up to 5 kg / 11 lbs, the ball head 40 (Ball 40) up to 10 kg / 22 lbs without any problems. Characteristic is the grease-free operation of the ball, which eliminates problems with dust and dirt. Noncorrosive materials make both balls genuine outdoor products. The ball heads 30 and 40 (Ball 30 / Ball 40) are the ideal addition to the NOVOFleX universal clamps (UNikleM) and the NOVOFleX mini tripod (BaSiC Ball).
TEcHNicAL sPEciFicATiONs
Order code: | Ball NQDimensions: | h = 80 mm (3.1"), Ø = 75 mm (3")Weight: | 460 g (1.01 lbs)Tripod connection: | 1/4" bzw 3/8"camera connection: | Q=PlaTeLoad rating: | 7 kg (15.5 lbs)
Order code: | BALL 30Dimensions: | h = 75 mm (3"), Ø = 41 mm (1.6")Weight: | 255 g (0.56 lbs)Tripod connection: | 1/4" | 3/8"Camera connection: | 1/4"Load rating: | 5 kg (11 lbs)
Order code: | BALL 40Dimensions: | h = 95 mm (3.7"), Ø = 53 mm (2.1")Weight: | 485 g (1.07 lbs)Tripod connection: | 1/4" | 3/8"Camera connection: | 1/4"Load rating: | 10 kg (22 lbs)
PRODUcT iNFORMATiON
Ball NQ Ball 30 Ball 40
Technical specifications subject to change without notice.
Ball heads 19"
Ball 19 | Ball 19P | Neiger 19 | Neiger 19PThe compact and sturdy ball heads 19 and 19 P (Ball 19 / Ball 19P) hold equipment up to 3 kg / 6.6 lbs without problems.The version „P“ adds a separate lock for the panorama function. The ball heads NeiGeR 19 and NeiGeR 19P are supplied with a special flash-shoe. With these ball heads not only flashes canbe positioned accurately, but also video lights, lighting gobos, measuring instruments and much more.The NeiGeR 19P also possesses a panorama lock knob. all four tripod heads are universally applicable; we recommend them particularly for the NOVOFleX universal clamps 26 and 42(UNikleM 26/UNikleM 42), the NOVOFleX mini tripod (MiCROPOd) and the NOVOFleX monopod (BB-STOCk).
PRODUcT iNFORMATiON
TEcHNicAL sPEciFicATiONs
Ball 19 Ball 19PNeiGeR 19 NeiGeR 19P
BALL HEADs_
BALL 19 | Ball head | UNikleM 26/42 | MiCROPOd | BBSTOCk
BALL 19P | Ball head | UNikleM 26/42 | MiCROPOd | BBSTOCk
NEiGER 19 | Ball head | UNikleM 26/42 | MiCROPOd | BBSTOCk
NEiGER 19P | Ball head | UNikleM 26/42 | MiCROPOd | BBSTOCk
Order code: | BALL 19Dimensions: | h = 56 mm (2.2"), Ø = 30 mm (1.8")Weight: | 92 g (0.20 lbs)Tripod connection: | 1/4" | 3/8"Camera connection: | 1/4"Load rating: | 3 kg (6.6 lbs)
Order code: | BALL 19PDimensions: | h = 66 mm (2.6"), Ø = 30 mm (1.8")Weight: | 118 g (0.26 lbs)Tripod connection: | 1/4" | 3/8"Camera connection: | 1/4"Load rating: | 3 kg (6.6 lbs)
Order code: | NEIGER 19Dimensions: | h = 56 mm (2.2"), Ø = 30 mm (1.8")Weight: | 92 g (0.20 lbs)Tripod connection: | hot shoe | 1/4"Camera connection: | 1/4"Load rating: | 3 kg (6.6 lbs)
Order code: | NEIGER 19PDimensions: | h = 66 mm (2.6"), Ø = 30 mm (1.8")Weight: | 118 g (0.26 lbs)Tripod connection: | hot shoe | 1/4"Camera connection: | 1/4"Load rating: | 3 kg (6.6 lbs) Technical specifications subject to change without notice.
Combinations galore – the BALPRO 1 universal bellows
The NOVOFLEX BALPRO 1 universal bellows is the most versatile bellows on the market. With its complete adapter ring system it supports almost any combination of lens and camera systems. You can combine most middle-format lenses and nearly all 35 mm lenses and special lenses with any size camera body up to 6 x 7 format. Thanks to its compact dimensions, the BALPRO 1 is also ideal for on the road and in the field.It is possible to create a fully automatic bellows for the CANON EOS system by combining the BALPRO 1 with the automatic reversing ring for EOS from NOVOFLEX (EOS-RETRO).
PRODUCT INFORMATION
TECHNICAL DATA
Universal bellows
NOVOFLEX
N
Order code: | BALPRO 1 Size: | h = 150 mm (5.9”), b = 115 mm (4.52”), l = 200 mm (7.87”) Weight: | 755 g (1.6 lbs)Minimum extension: | 40 mm (1.57“) Maximum extension: | 192 mm (7.55”)
NOVOFLEX Präzisionstechnik GmbHBrahmsstrasse 7, D-87700 MemmingenTelephone +49 8331 88 888, Fax +49 8331 47 [email protected], www.novoflex.de
WITH COMPLIMENTS
MACRO ACCESSORIES_
BALPRO 1 | UNIVERSAL BELLOWS | CAmERA AdAPTER
| LENS AdAPTER
| LENS HEAdS
___
_
_
_
_
Universal bellows
ACCESSORIES
NOVOFLEX offers two special lens heads (APO DIGITAR) by Schneider in Bad Kreuznach for the BALPRO 1 bellows, which are optimized for digital cameras.These lens heads are flush-mounted permanently on the bellows.2 focal lengths are available:
SCHNEIDER Apo-Digitar 4,0/80 mm Order code: | PRO-APO-dIGI 80 SCHNEIDER Apo-Digitar 5,6/100 mm Order code: | PRO-APO-dIGI 100
The lenses allow adjustment to infinity with all cameras. 35mm SLR cameras require the 80 mm lens head, the Mamiya 645 the 100 mm lens head. The setting for 35 mm cameras ranges from infinity to 1.8x enlargement.
CONNECTIONS FOR BALPRO 1 AND BALPRO T/S
35mm SLR Camera BALPRO 1 – Adapter BALPRO T/S
Canon EoS * | Cana-aF and aPRo oder PRoshift+Canon FD | Cana and aPRo oder PRoshift+Contax/yaShiCa | Conta and aPRo oder PRoshift+FoUR thiRDS | oMa-DiGi and aPRo oder PRoshift+LEiCa-R | LEa-R and aPRo oder PRoshift+M 42 | Coa and aPRo oder PRoshift+MiCRo FoUR thiRDS | MFta and aPRo oder PRoshift+MinoLta | Mina and aPRo oder PRoshift+MinoLta-aF / Sony α | Mina-aF and aPRo oder PRoshift+nikon | nika and aPRo oder PRoshift+oLyMPUS oM | oMa and aPRo oder PRoshift+PEntax, SiGMa | PEnta and aPRo oder PRoshift+RoLLEi SL 35 | RoLa and aPRo oder PRoshift+SaMSUnG nx | nxa and aPRo oder PRoshift+Sony nEx | nExa and aPRo oder PRoshift+
6x6 MF Camera BALPRO 1 – Adapter BALPRO T/S
Contax 645 | ContPRoExakta 66 | ExPRohaSSELBLaD 2000/205 | haPRoMaMiya 645 | MaMPRoPEntax 645 | taxPRoPEntax 67 | PEntPRo
35mm Lens BALPRO 1 – Adapter BALPRO T/S
Canon EoS* | *Canon FD | LEiCan and PRoLEiContax/yaShiCa | LEiCont and PRoLEiC-MoUnt | LEiCE and PRoLEiLEiCa-thREaD | PRoLEiLEiCa-R | LEi-F and PRoLEiLEiCa-M | LEi-M and PRoLEiM 42 | LEiCo and PRoLEiMikRoSkoP-oBjEktivE | LEiMik and PRoLEiMinoLta MD | LEiMin and PRoLEinikon ai, aF | LEinik and PRoLEinikon G** | LEinik nt and PRoLEioLyMPUS oM | LEioM and PRoLEiPEntax | LEiPEnt and PRoLEi
6x6 Lens BALPRO 1 – Adapter BALPRO T/S
Exakta 66 | PRoExhaSSELBLaD 2000/205 | PRohaMaMiya 645 | PRoMaMPEntax 645 | PRotaxPEntax 67 | PRoPEnt
Adapter for Baluni bellows rings | UNIPROShift-Adapter | PROshift+
* To get an automatic bellow for Canon EOS you need the following combination to connect:| EOS-RETRO | EOS/PRO | PRO/EOS
** adapter with stop-down function
BasicBall
NOVOFLEXN
NOVOFLEX Präzisionstechnik GmbHBrahmsstraße 7, D-87700 MemmingenTelefon +49 8331 88 888, Fax +49 8331 47 [email protected], www.novoflex.de
MIT FREUNDLICHEN EMPFEHLUNGEN
260/
D/0
6.05
/AD
LIEFERUMFANG
BasicBall = Halbkugel mit 9 1/4" Bohrungen + 1 1/4"-Stativgewinde + 3 x 20cm Stativbeine
TECHNISCHE DATEN
Bestellcode: | BB blau | BB silberGröße: | Ø 60 mm | Ø 60 mmGewicht: | 390 g | 390 gGewicht mit 3 NOVOFLEX-Teleskopstöcken: | 1100 g | 1100 gBelastbarkeit m. Teleskopstöcken: | 10 kg | 10 kg
Der NOVOFLEX BasicBall wurde speziell für die bodennahe Fotografie, die Table Top Fotografie und für Natur-Fotografie entwickelt. Der BasicBall bildet eine stabile Basis für Kugelköpfe und Kameraneiger wie beispielsweise den 2-D-Neiger D IN O, den MagicBall, den Ball 19 oder den ClassicBall von NOVOFLEX, aber auch für nahezu alle Neiger anderer Hersteller. Der BasicBall ist geeignet für Kameras und Zubehör bis zu 25 kg. Umfangreiches Zubehör ermöglicht die Adaption von Blitzgeräten, Videoleuchten oder Mikrofonen.
PRODUKTINFORMATION
MINISTATIV_
BASICBALL | MINIsTATIV |TELEsKOpwANDErsTöCKE |sTATIVBEINVErLäNgErUNgssET
___
_
_
_
BasicBall
ZUBEHÖR
Der BasicBall ist äußerst vielseitig einsetzbar:
Als Tisch- oder MinistativNeun verschiedene Bohrungen für die stativbeine ermöglichen eine Höhenverstellung von 6 cm, 14,5 cm und 21 cm. Mit den optional erhältlichen Verlängerungen kann eine Höhe von 33 cm erreicht werden. große, gummierte Kugeln an den Beinenden sorgen für einen sicheren stand.Als 1-Bein-, 2-Bein- oder 3-Bein-stativ
Stativbeinverlängerungsset 15 cm
Bestellcode: | MpsETLänge: | 3 stangen á 150 mmGesamtgewicht: | 90 g
Mit den NOVOFLEX Teleskop-Wanderstöcken lässt sich der BasicBall zu einem vollwertigen 1-, 2- oder 3-Bein-stativ mit einer variablen Einstellhöhe von 61 cm bis maximal 130 cm ausbauen. Ideal für Trekkingtouren, bei denen gewicht eine große rolle spielt. Die Teleskop-wanderstöcke sind mit einem 1/4“ stativgewinde, der von einem bequemen Holzknauf abgedeckt wird und einer Handschlaufe ausgestattet. so wird blitzschnell aus einem komfortablen wanderstock ein stabiles stativbein.
NOVOFLEX-Teleskopwanderstöcke
Bestellcode: | BBsTOCKLänge: | 68 cm bis max. 145 cmGewicht: | 310 g
Als BruststativIn Verbindung mit einem stativkopf lässt sich der BasicBall auch hervorragend als Bruststativ ein-setzen. Besonders gut geeignet für diesen Einsatz sind der 2-D-Neiger D IN O und der MagicBall von NOVOFLEX.Mit dem BasicBall stellt NOVOFLEX einmal mehr seine Kompetenz als spezialist für innovative problemlösungen unter Beweis.
BasicBall-GriffDie Kombination von BasicBall-griff und BasicBall ermöglicht ein ideales Halten von Kameras, Objektiven mit stativschelle, Videokameras etc.Der Handgriff lässt sich in verschiedene winkel einsetzen und ermöglicht dadurch ein bequemes Halten. BasicBall-griff und BasicBall mit zwei stativbeinen ergeben ein ideales Bruststativ.
Bestellcode: | BB-grIFFGewicht: | 210 gAbmessungt: | 140 mm
The technology transition from analog to digital is influencing the way existing slides and negatives are handled and archived. An ideal solu-tion is now available with the CASTEL-COP-DIGI slide duplicator from NOVOFLEX that allows fast and easy digitalization of your originals, from 35 mm up to 6 x 7 cm medium format.The digital slide duplicator is designed to be used with the NOVOFLEX Castel-L/Castel-Q/Castel-mini focusing racks, plus most of the current NOVOFLEX bellows with rack-and-pinion drive. This duplicating method is especially recommended if larger quantities of negatives or slides need to be digitized quickly with a digital camera. The high quality of today‘s digital cameras ensures first-rate results in double quick time and many users prefer this method to scanning with a slide scanner. The digital slide duplicator reliably positions framed 35 mm or medium-format slides or film strips. The NOVOFLEX slide duplicator can be used without any problems with macro lenses up to 105 mm.What are the advantages of digital copies over scanning? The higher the resolution of your digital camera, the better will be the final result. Conventional scanners often lack the quality of digital SRL cameras, and scanning are often takes considerably longer than shooting with a camera.
PRODUCT INFORMATION
TECHNICAL DATA
Castel-Cop-Digi
NOVOFLEXN
Order code: | CASTEL-COP-DIGISlide length: | 32 cm (12.59“)Duplicating area: | 6.5 x 7.5 cm (2.55 x 2.95“)Weight: | 210 g (0.46 lbs)
NOVOFLEX Präzisionstechnik GmbHBrahmsstrasse 7, D-87700 MemmingenTelephone +49 8331 88 888, Fax +49 8331 47 [email protected], www.novoflex.de
WITH COMPLIMENTS
FOCUSING RACK_
CASTEL-COP-DIGI | SLIDE DUPLICATOR | CASTEL-MINI | BALPRO 1 | BALPRO T/S | CASTEL-L | CASTEL-Q
___
_
_
_
_
TOP TIP
Use a CASTEL-Q focusing rack and Q=BASE mounting plates for transverse camera adjustment. Cameras with a tripod connection on the side can be precisely positioned in this way. This speeds up work enormously when selecting the picture area to be copied because otherwise the whole tripod would have to be set up again.
470/
E/06
.05/
AD
The ClassicBall is a world first in ball head design, with:t Three vertical 90° openings for the ball neckt New AFC (advanced friction control) system for precisely repeatable and defined friction presett No more fumbling for friction, locking and panning knobst Absolutely no change of ball position during locking, thanks to totally new design of the ball interior
PRODUCTINFORMATION
TECHNICAL DATA
ClassicBall
TRIPOD HEADS_
CLASSICBALL 5 | BALL HEAD
CLASSICBALL 5 MC | BALL HEAD | MINICONNECT
CLASSICBALL 5 QP | BALL HEAD | Q-PLATE
CLASSICBALL 3 | BALL HEAD
CLASSICBALL 3 MC | BALL HEAD | MINICONNECT MR
CLASSICBALL 3 QM | BALL HEAD | Q-MOUNT
___
_
_
_
_
NOVOFLEXN
Code: | CB5Hight: | 115 mmBase diameter: | Ø 70 mmCamera-mount diameter: | Ø 60 mmWeight: | 860 gSupport: | 12 kg
NOVOFLEX Präzisionstechnik GmbHBrahmsstrasse 7, D-87700 MemmingenPhone +49 8331 88 888, Fax +49 8331 47 [email protected], www.novoflex.de
WITH COMPLIMENTS
Code: | CB3Hight: | 85 mmBase diameter: | Ø 60 mmCamera-mount diameter: | Ø 45 mmWeight: | ca. 450 gSupport: | 8 kg
CLASSICBALL | BALL HEAD
___
_
_
_
_
THE APPLICATION
One glance at the ClassicBall, with its understated matt titanium finish, and it‘s clear that this is a high-precision instrument made to last. In line with NOVOFLEX‘s well-known product policy, the ClassicBall is an all-metal design incorporating advanced polymer materials. As with other NOVOFLEX products, the ClassicBall was developed and is manufactured entirely at the company‘s plant in Memmingen (precision made in Germany).
Completely new, and a world first in ball head design, are three 90° openings to take the ball neck that significantly increase the vertical adjustment range of the head. The camera can now swing smoothly through 180° vertically. Equally important is that having three 90° openings has been achieved with no loss of stability.
Working on the ClassicBall 5, NOVOFLEX development engineers aimed first and foremost to meet photographers‘ requirement for a precisely controllable and repeatable friction adjustment (braking) for the ball. The result was the new AFC (advanced friction adjustment). Integrated here for the first time, AFC allows photographers to set the friction on a setting ring in the center of the ball head. In other words, they can set the correct braking rate of the ball even before he attaches camera and lens. This is finally the end of trial and error adjustment. Getting the right setting is now child‘s play, even with weighty telephoto lenses.
In contrast to other ball heads of this type, the ClassicBall makes it possible to lock the ball in position without any risk of even a slight shift in position. This feature comes into its own in macro photography where it is essential not to disturb the setting of a shot.
As one would expect from a product of this caliber, the ClassicBall provides integrated 360° panning and two camera threads (1/4“ and 3/8“). The ball support is permanently grease-free.
All adjusting elements have been optimized for easy operation even under very difficult conditions. Photographers working in very low temperatures, for example, can set and check all functions reliably without removing their gloves.
In designing the ClassicBall, NOVOFLEX engineers drew on practical experience and their deep knowledge of the problems encountered by professional photographers in their daily work. The company has gone to great lengths to achieve high stability and excellent resistance to vibration.
ClassicBall
With its low weight, sensitive friction brake and integrated 360° panorama adjustment, the D IN O represents another milestone in the development of modern movable tilt heads. It‘s ideal for mounting spotting scope and telescopes – or any type of digital or analog video, film or photo camera.
Horizontal and vertical panning are silky-smooth. After a precision stop, the D IN O is fixed firmly with a twist of the control knob. The guide lever makes fast positioning easy. Video filmers and macro specialists, in particular, will be delighted by the fantastic adjusta-bility. The D IN O is used by thousands of birdwatchers. Panning the D IN O vertically by 90° is a quick way to switch a camera from portrait to landscape format. And lenses with a multi-position tripod mount turn this innovative 2-way tilt head into a 3-way tilt head.
D IN O is available in either titan or silver finish and is supplied with a detachable guide lever and video pin.
PRODUCT INFORMATION
TECHNICAL DATA
D IN O 2-way tilt head
NOVOFLEXN
Order code: | D IN O silber | D IN O titanDimensions: | 70 x 70 x 90 mm | 70 x 70 x 90 mmWeight: | 330 g | 330 gTripod Connection: | 1/4“ or 3/8“ | 1/4“ or 3/8“ Camera Connection: | 1/4“ | 1/4“Load rating: | 5 kg | 5 kg
NOVOFLEX Präzisionstechnik GmbHBrahmsstrasse 7, D-87700 MemmingenTelephone +49 8331 88 888, Fax +49 8331 47 [email protected], www.novoflex.de
WITH COMPLIMENTs
TRIPOD HEADs_
D IN O silver | 2-WAY TILT HEAD | BASICBALL | QUICK-RELEASE SYSTEM
D IN O titan | 2-WAY TILT HEAD | BASICBALL | QUICK-RELEASE SYSTEM
___
_
_
180/
E/10
.05/
AD
For owners of CANON EOS wide-angle or zoom lenses, the EOS-RETRO opens up the world of extreme close-up photography with outstand-ing quality. The EOS-RETRO lets you mount the lens in reverse position on the camera. The ring transfers all control functions. With a CANON EOS 28-105 mm zoom lens in reverse position, you get an image ratio of 1:7 with a focal length of 105 mm from 1:7 to 2.8:1 at 28 mm. This is a wider setting range than is possible with a macro lens. The EOS-RETRO is supplied standard with a 58 mm filter diameter. Stepping rings are available for other filter sizes.
PRODUCT INFORMATION
TECHNICAL DATA
EOS-Retro
NOVOFLEXN
Order code: | EOS-RETROSize: | 75 mm (2.95”)Weight: | 160 g (0.35 lbs)Maximum extension: | 550 mm (21.65”)
NOVOFLEX Präzisionstechnik GmbHBrahmsstrasse 7, D-87700 MemmingenTelephone +49 8331 88 888, Fax +49 8331 47 [email protected], www.novoflex.de
WITH COMPLIMENTS
TOP TIP
For extreme enlarging we recom-mend the use of the NOVOFLEX BALPRO 1 universal bellows together with the reversing ring for CANON EOS. This combination not only includes an automatic bellows for the CANON EOS, but also lets you use the camera lens in reverse position with full automatic control of the bellows. The image ratio of the EF 1.8/28 mm in reverse posi-tion on the BALPRO 1 ranges from 3.6- to 7.2-fold enlargement.
870/
E/06
.05/
AD
MACRO ACCESSORY_
EOS-RETRO | REVERSE ADAPTER FOR CANON EOS | STEPPING RINGS
___
_
_
_
_
FLASH-GRIFF. Mounted on the newly-developed camera base plate, the grip offers a convenient method for positioning one of today’s large flash units either by screwing it directly to the ball head or sliding it into the flash shoe on the tilt head.Flexible flash alignment and a hand strap that lets you keep a firm hold on the whole unit are two of the grip’s outstanding features. The grip can be unscrewed from the base plate and stowed away during transport.
XX-HALTER. This Duo-Flash holder for optimal positioning of two flash units is the outcome of extensive testing and many years’ experi-ence. The Duo-Flash holder does away with earlier compromises between fast handling and compact design. Now positioning of the two flash units is completely flexible and adjustment is lightning fast. The camera base plate is attached to the underside of the camera, the vario system supports two ball heads with flash shoes, and can be rotated and shifted freely. Because a ball head can be mounted virtually anywhere along the rails, a vast number of different flash positions is possible. And the whole system is quick and easy to reconfigure. The flexible design means the Duo-Flash holder can be dismantled very quickly; the resultant small package fits into most camera bags.
PRODUCT INFORMATION
TECHNICAL DATA
Flash holding systems
NOVOFLEXN
Order code: | FLASH-GRIFFTotal weight: | 450 g ( 0.99 lbs)Dimensions: | Grip Ø 4.0 cm (1.57“)Length: | 13.8 cm (5.43“)Base plate: | 25 x 4 x 0.8 cm (9.84 x 1.57 x 0.31“)
NOVOFLEX Präzisionstechnik GmbHBrahmsstrasse 7, D-87700 MemmingenTelephone +49 8331 88 888, Fax +49 8331 47 [email protected], www.novoflex.de
WITH COMPLIMENTS
Order code: | XX-HALTERWeight: | 370 g ( 0.81 lbs)Packing dimensions: | 36 x 4 x 8 cm (14.17 x 1.57 x 3.14“)
750/
E/06
.05/
AD
FLASH-GRIFF XX-HALTER
FLASH HOLDERS_
FLASH-GRIFF | FLASH AND HOLD | AUTO-FLASH-ART
| FLASH UNITS
XX-HALTER | FLASH AND HOLD | AUTO-DUO-FLASH
| FLASH UNITS
___
_
_
_
Flash holding systems
PRODUCT INFORMATION
UNISET. This flash holding system with sliding rods consists of a rigid camera plate with two jointed rods (horizontal and vertical) and two non-jointed rods. The system is capable of mounting even heavy flash units in any desired position and can also be used to precisely position video lights, microphones and fill-in light panels.
UNIMARM. This flash holding system consists of a rigid camera base plate with two flexible arms that can hold the flash units in any posi-tion. A ball joint with a flash shoe is attached at the end of each flexible arm. The arms can be easily adjusted to position the flash units precisely.
TECHNICAL DATA
Order code: | UNISETTotal weight: | 900 g (1.98 lbs)Base plate: | 245 x 80 x 40 mm ( 9.64 x 3.14 x 1.57“)Traverse: | 220 mm each (8.66“)Maximum flash distance: | 560 mm (22.04“)
FLASH HOLDER_
UNISET | FLASH AND HOLD | AUTO-DUO-FLASH
| FLASH UNITS
UNIMARM | FLASH AND HOLD | AUTO-DUO-FLASH
| FLASH UNITS
___
_
_
_
Order code: | UNIMARMTotal weight: | 1260 g (2.77 lbs)Base plate: | 245 x 80 x 40 mm (9.64 x 3.14 x 1.57“)Arm length: |495 mm each (19.48“)
UNIMARMUNISET
Focusing racks
NOVOFLEXN
NOVOFLEX Präzisionstechnik GmbHBrahmsstraße 7, D-87700 MemmingenTelefon +49 8331 88 888, Fax +49 8331 47 [email protected], www.novoflex.de
wiTH cOMPLiMENTs
410/
E/11
.08/
AD
NOVOFLEX focusing racks are indispensable accessories for macro and stereo photography. They can be mounted on any tripod and on the NOVOFLEX MS-REPRO macro reprostand. The CASTEL-Q comes with Arca size dovetail clamping and was designed to fit the NOVOFLEX Q=BASE quick-release system. It can also be mounted on any commercially available tripod head. A second focusing rack converts the CASTEL-Q to a cross rack of exceptional stability.
PRODUcT iNFORMATiON
cAsTEL-Q FOcUsiNG RAck
Order code: | CASTEL-QDimensions: | 200 x 100 x 33 mmGlider width: | 66 mmweight: | 450 gTravel: | 125 mmcamera connector pieces (Q=plates) not included in the scope of delivery. see data sheet Q=BAsE or Q=MOUNT for available plates.
TEcHNicAL DATA
The new focusing rack is equipped with the connection from the well-known quick-release system Q (Arca size dovetail clamping). Due to the integrated dovetail connections on top as well as at the bottom it can also be extended to a cross focusing rack when combined with a second rack. Adjustable on two levels, it achieves a total travel of 380 mm, although its basic length is only 256 mm.
PRODUcT iNFORMATiON
cAsTEL-XQ FOcUsiNG RAck PRO
Order code: | CASTEL-XQDimensions: | 256 x 102 x 60 mmGlider width: | 66 mmweight: | 900 gTravel: | 380 mmcamera connector pieces (Q=plates) not included in the scope of delivery. see data sheet Q=BAsE or Q=MOUNT for available plates.
TEcHNicAL DATA
FOcUsiNG RAcks_
cAsTEL-Q | FOCUSING RACK WITH DOVE-TAIL | Q=PLATE | CASTEL-CROSS
cAsTEL-XQ | FOCUSING RACK PRO WITH DOVE-TAIL | Q=PLATE
cAsTEL-L | FOCUSING RACK MC | MINICONNECT | CASTEL-CROSS
cAsTEL-XL | FOCUSING RACK PRO MC | MINICONNECT
cAsTEL-MiNi | MINI FOCUSING RACK
___
_
_
Focusing racks
The CASTEL-MINI has a 1/4“ tripod connection. Two fine-position drives give a total travel of 135 mm. The CASTEL-MINI is the ideal tool for all macro photographers who are looking for a focusing rack that combines low weight with highest stability.
PRODUcT iNFORMATiON
cAsTEL-MiNi FOcUsiNG RAck
Order code: | CASTEL-MINIDimensions: | 130 x 80 x 55 mmweight: | 280 gTravel: | 135 mm
The CASTEL-L has an integral camera quick-release connection (from the NOVOFLEX MiniConnect system) that allows quick mounting and dismantling of the camera equipment. The focusing rack can be mounted either on a tripod head, or on a Q=BASE or Q=MOUNT quick-release connection.
PRODUcT iNFORMATiON
cAsTEL-L FOcUsiNG RAck Mc
Order code: | CASTEL-LDimensions: | 200 x 100 x 33 mmslider width: | 66 mmweight: | 420 gTravel: | 140 mm
Tip:
Using the CASTEL-L or CASTEL-Q with the NOVOFLEX Q=BASE quick-release system doubles the available length of travel.
PRODUcT iNFORMATiON
cAsTEL-XL FOcUsiNG RAck PRO Mc
Order code: | CASTEL-XLDimensions: | 256 x 102 x 60 mmGlider width: | 70 mmweight: | 900 gTravel: | 380 mm
Providing absolute stability, the CASTEL-XL is the focusing rack of choice for heavy professional cameras. Adjustable on two levels, it achieves a total travel of 380 mm, although its basic length is only 256 mm. Suitable for all tripod and tilt heads.
Note:
CASTEL-L, CASTEL-Q and CASTEL-MINI have special guide bores to take the NOVOFLEX CASTEL-COP-DIGI slide duplicator.
Technical data is subject to change without notice
MagicBall
NOVOFLEXN
NOVOFLEX Präzisionstechnik GmbHBrahmsstraße 7, D-87700 MemmingenTelefon +49 8331 88 888, Fax +49 8331 47 [email protected], www.novoflex.de
wiTH cOMPLiMENTs
PRODUcT iNFORMATiON
The MagicBall ball head series is yet another example of NOVOFLEX‘s outstanding ability to develop innovative and practical accessories. There are three models in the MagicBall series – for different camera configurations with total weight from 5 to 10 kg. The ball heads provide an unbelievable positioning range of 120° in virtually any plane. All three models are easy to handle and compatible with practically any tripod. Part of the secret is the large, grippy point-and-fix handle. The handle is used to position the MagicBall exactly, then a simple twist fixes it firmly in place. On the larger models, designed for heavier equipment, adjustment is made easier by an integrated friction setting. This variable friction setting lets you match the camera weight to the adjusting force.The outstanding design and use of only the finest materials blocks any vibration transfer. The knurled wheel makes for simple and safe camera mounting.
BALL HEAD_
MAGicBALL | BALL HEAD | GUIDE HANDLE
MAGicBALL 50 | BALL HEAD | GUIDE HANDLE
MAGicBALL MiNi | BALL HEAD
___
_
_
_
110/
E/10
.05/
AD
MagicBall
TEcHNicAL DATA
Order code: | MB 50Height: | 90 mmBall: | Ø 50 mm Length: | 150 mmBase: | 42 mmsupport pad: | 52 x 34 mmweight: | 610 gLoad rating: | 7 kg
MAGicBALL 50 – THE UNiVERsAL ONERecommended for 35 mm and middle format cameras and camcordersup to 7 kg. Integrated friction setting.
TEcHNicAL DATA
Order code: | MB MINIHeight: | 75 mmBall: | Ø 40 mm Length: | 110 mmBase: | 35 mmsupport pad: | 45 x 30 mmweight: | 330 gLoad rating: | 5 kg
MAGicBALL MiNi – THE sMALL ONESuitable for camera equipment up to 5 kg. Without friction setting.
TEcHNicAL DATA
Order code: | MB-GRIFFDimension: | Ø 30 mmLength: | 100 mmweight: | 220 g
GUiDE HANDLE FOR MAGicBALL AND MAGicBALL 50Improves handling of the MagicBall and MagicBall 50 when used with big telephoto lenses or professional video cameras.
TEcHNicAL DATA
Order code: | MBHeight: | 105 mmBall: | Ø 60 mm Length: | 160 mmBase: | 50 mmsupport pad: | 55 x 40 mmweight: | 920 gLoad rating: | 10 kg
MAGicBALL – THE BiG ONESuitable for 35 mm and middle format cameras with big telephoto lenses and professional video cameras up to 10 kg. Integrated friction setting. Design Award Winner 1998.
Mini tripods
NOVOFLEXN
NOVOFLEX Präzisionstechnik GmbHBrahmsstraße 7, D-87700 MemmingenTelefon +49 8331 88 888, Fax +49 8331 47 [email protected], www.novoflex.de
wiTH cOMPLiMENTs
270/
E/10
.05/
AD
MiNi TriPOD_
MiNiPOD | mini tripod | tripod LEG EXtEnSion SEt
MicrOPOD | mini tripod
microStativ | micropod | Ball 19
microStariv Q | micropod | Ball 19 | Q=mount mini, Qpl Slim 25
___
_
_
_
PrODUcT iNFOrMATiON
MinipodWe came up with the minipod to provide unparalleled flexibility in ground-level photography. the legs are individually adjustable for perfect positioning on uneven or sloping surfaces. Set angle positions of 30°, 60° and 90° for working heights from 40 to 190 mm simplify handling. the leg ends are fitted with large rubberized feet for a steady stance, even on smooth surfaces. the feet also avoid sensitive finishes being scratched. the solid tripod base takes virtually all commercially available tripod heads and camera tilt heads. noVoFLEX offers a big choice of tilt and ball heads for a very wide range of applications. the minipod is ideal for macro and table-top photography. it can be used to support cameras, flash units, photography and video lights, light barriers and other accessories up to 10 kg weight.
Order code: | minipodDimensions: | 250 x 105 x 40 mm (9.8" x 4.1" x 1.6")Maximum height: | 190 mm (7.5“)weight: | 390 g (0.85 lbs)
MicropodWeighing in at just 50 g, the micropod is an ideal companion if you‘re out and about. it also scores highly in table-top photography. it‘s right for digital cameras and camcorders, and has also no problems with supporting a heavy SLr camera. it is also perfect for positioning flash lights, video lights, microphones, etc. together with the noVoFLEX BALL 19 and 19p, it‘s an item that should be found in any camera bag. the plug-in legs are assembled in a trice for immediate action. Folded together, the tripod turns into a small handle that can be used to stabilize the camera as you carry it. Order code: | miCropodMaximum heigth: | 70 mm (2.76“)weight: | 50 g (0.11 lbs)
the micropod is also available in 2 special models:
order code: | microStativ consisting of micropod and Ball 19order code: | microStativ Q consisting of micropod, Ball 19, Q=mount mini and Qpl Slim 25
minipod micropod microStativ Q
MiniConnect This elegant quick-release connection system offers outstanding stability. It is robust enough to take very heavy cameras and lenses. The ingenious design permits single-handed operation, because the connectors lock automatically on insertion. A dual safety system prevents accidental loosening or detaching. The round connectors are extremely small and have a low profile, so they can be left permanently attached to the tripod connections of cameras or lenses. A range of six connectors for different equipment and applications, plus an angle bracket and a special carrying strap, round off the MiniConnect product range.
PRODUCT INFORMATION
MiniConnect
NOVOFLEXN
TECHNICAL DATA
Order code: | MCDimensions: | 80 x 60 x 18 mmWeight: | 140 gTripod connection: | 1/4“ or 3/8“
NOVOFLEX Präzisionstechnik GmbHBrahmsstraße 7, D-87700 MemmingenTelefon +49 8331 88 888, Fax +49 8331 47 [email protected], www.novoflex.de
WITH COMPLIMENTs
MInIConneCT
MiniConnect MRThe manual quick-release connection from the MiniConnect series is specially developed for small ball and tilt heads and can be used with any support system. It is recommended for small to mid-sized camera systems. MiniConnect MR is compatible with the connectors and accessories of the MiniConnect quick-release connection system.
MInIConneCT MR
TECHNICAL DATA
Order code: | MC-MRDimensions: | h = 20 mm, Ø 53 mmWeight: | 100 gTripod connection: | 1/4“ or 3/8“
QUICk-RELEAsE CONNECTION sysTEM_
MC | AUToMATIC QUICK-ReLeASe ConneCTIon SYSTeM
MC-PROFI | PRoFISeT AUToMATIC QUICK-ReLeASe ConneCTIon SYSTeM
MC-MR | MAnUAL QUICK-ReLeASe ConneCTIon SYSTeM
MC-VERTIkAL | AnGLe BRACKeT
___
_
_
_
_
510/
E/10
.05/
AD
MiniConnect
MiniConnect strap The webbed strap is easy and comfortable to wear. Attach a quick-release connection system to hang around your neck or over your shoulder instead of a conventional camera strap. You can attach any of several cameras to it and quickly transfer the camera to a tripod with no camera strap to get in the way. Another benefit is that the camera hangs with the lens pointing downwards – a safer way to carry than using a conventional strap. You have both hands free to change the film, or modify the settings on a digital camera, and you don‘t need to take the camera off to do it. The camera can be detached from the strap with one quick movement.
Order code: | MC-GURT
MiniConnect Profiset Consisting of a base plate (MC), three 1/4“ connectors (MC 1/4“) and strap (MC-GURT), buying the set is cheaper than buying the items separately. The MC Profiset is for photo-graphers who want the ingenious quick-release connection system for several cameras or lenses.
Order code: | MC-PRoFI
MiniConnect MC-VERTICAL angle bracket The MC-VeRTICAL angle bracket allows the camera format to be changed from portrait to landscape in just seconds. The camera alignment and settings (eg. focus) remain unchanged. Cameras with a motor drive and/or powerpack handles can also be swivelled in the optical axis.
Order code: | MC-VeRTIKALDimensions: | 165 x 135 mmWeight: | 330 gConnection: | Special 1/4“ connector
MiniConnect connectors Small and round, MC connectors come in six versions.Suitable for: MiniConnect quick-release connection system, MiniConnect MR quick-release connection system, CASTeL-L focusing rack, CASTeL-XL focusing rack.
MiniConnect special 1/4“ connector With extra anti-twist pin, only for metal camera bases or metal lens tripod connections.
Order code: | MC-SPeCIAL 1/4Dimension: | Ø = 25 mmWeight: | 18 g
MiniConnect special 3/8“ connector With additional anti-twist pin, only for metal came-ra bases or metal lens tripod connections.
Order code: | MC-SPeCIAL 3/8Dimension: | Ø = 25 mmWeight: | 18 g
MiniConnect 1/4“ long connector extra-long thread (length = 8 mm)
Order code: | MC-1/4-LAnG
MiniConnect 3/8“ long connectorextra-long thread (length = 8 mm)
Order code: | MC-3/8-LAnG
MiniConnect 1/4“ connector
Order code: | MC-1/4Dimension: | Ø = 25 mm
MiniConnect 3/8“ connector
Order code: | MC-3/8Dimension: | Ø = 25 mm
The NOVOFLEX PISTOCK-C is a multi-purpose applicable support that can optionally be used as chest- or shoulder support.It is fit with a big bearing surface which is adjustable according to the camera type. Versatile possibilities of adjustability allow an infinite adjustment, depending on body height of the photographer or field of application.
PRODUCT INFORMATION
TECHNICAL DATA
Chest- and shoulder support
TRIPOD TECHNOLOGY_
PISTOCK-C | TrIpod Technology | wITh unIVersal plaTe
| specIal rapId lengTh adjusTmenT
___
_
_
_
NOVOFLEXN
Order code: | pIsTocK-cLength: | 28 cm / 24 cm (11 inch / 9.5 inch) variableWeigth: | 450 grams (1 lb.)
NOVOFLEX Präzisionstechnik GmbHBrahmsstrasse 7, D-87700 MemmingenTelephone +49 8331 88 888, Fax +49 8331 47 [email protected], www.novoflex.de
WITH COMPLIMENTS
Chest- and shoulder support
PISTOCK-C | TrIpod Technology | wITh unIVersal plaTe
| specIal rapId lengTh adjusTmenT
___
_
_
_
_
PRODUCT INFORMATION
The belt (1) can be adjusted in its length. The snap hooks can be opened by pressing the notch and drawing back the plastic cover. after loosening the clamp screw (3), the support can be adjusted in its length, too.
By turning the clamp screw (4) several times to the left, the support can be adjusted by 90° to be used either as chest- or shoulder support. having locked the screw the adjusted position is fixed. depending on the body height of the photographer respectively the utilisation purpose, the joint can be adjusted as well.
The universal plate can be fixed in such a way that the optimal support for each camera equipment will be guaranteed.
(3) clamp screw for length adjustment
(6) connection bolt for the universal plate
(4) clamp screw for adjustment of the chest-/shoulder support
(5) joint with binding screw
(7) universal plate with 1/4 inch support screw for all 35 mm cameras, telephoto lenses, medium format cameras and video cameras.
(1) carrying- and holding belt with snap hook
(2) shoulder- or chest support
USED AS SHOULDER SUPPORT WITH QUICK RELEASE MINICONNECT (MC)
PISTOCK-C WITH QUICK RELEASE Q=MOUNT AND CLAMPING PLATE QPL 4
PISTOCK-C WITH QUICK RELEASE Q=MOUNT AND ANGLE BRACKET QPL-VERTIKAL
PISTOCK-C WITH QUICK RELEASE Q=MOUNT AND ANGLE BRACKET QPL-VERTIKAL
USED AS CHEST SUPPORT WITH QUICK RELEASE MINICONNECT (MC)
NOVOFLEX offers a large variety of clamping plates for the Q=System in different lengths, screw sizes, anti-twist versions, special plates for medium format cameras and many more.The unique safety-pin feature prevents the camera or other attached gear from accidentally slipping out from the quick release.All Q=PLATES are Arca style dovetail compatible. However, the safety pin function can only be used with original NOVOFLEX quick releases.The new grey finished plates, available in lengths 270, 350 and 450 mm feature a double-sided dovetail profile (ideal for stereo and 3D photography).All Q=Plates are designed extremly stable and are manufactured with highest precision.
Quick release platesQ=Plate
NOVOFLEXN
NOVOFLEX Präzisionstechnik GmbHBrahmsstraße 7, D-87700 MemmingenTelefon +49 8331 88 888, Fax +49 8331 47 [email protected], www.novoflex.de
WiTH COMPLiMENTs
550/
D/0
5.11
/AD
QuiCk rELEAsE PLATEs_
Q=PLATE | Quick rELEASE PLATES | Q=SySTEm
__
_
_
_
_
PrODuCT iNFOrMATiON
Technical specifications subject to change without notice.
Quick release platesQ=Plate
[1] standard plate with 1 x 1/4“ screw, 90° offset mountig possibleOrder code: | QPL1size: | 1.7“ x 1.7“Weight: | 1.4 oz.
[2] standard plate with 1 x 3/8“ screw, 90° offset mountig possibleOrder code: | QPL1-3/8“size: | 1.7“ x 1.7“Weight: | 1.4 oz.
[3] Plate 84 mm, 2 x 1/4“ and 2 x 3/8“ screwOrder code: | QPL2Size: | 3.3“ x 1.7“Weight: | 2.8 oz.
[4] Plate 120 mm, 2x 1/4" and 2 x 3/8" screwOrder code: | QPL3Size: | 4.7“ x 1.7“Weight: | 4.6 oz.
[5]Plate 155 mm, 2x 1/4“ and 2 x 3/8“ screwOrder code: | QPL4size: | 6.1“ x 1.7“Weight: | 6 oz.
[6] Clamping plate slim 25 with 1 x 1/4“ screwOrder code: | QPL Slim 25size: | 1.5“ x 1“Weight: | 0.5 oz.
[7] Clamping plate slim 39 with 1 x 1/4“ screwOrder code: | QPL Slim 39size: | 1.5“ x 1.5“Weight: | 0.8 oz.
[8] L-bracket with 1 x 1/4“ screw Order code: | QPL-Vertikalsize: | 5.2“ x 5.2“Weight: | 8.1 oz.
[9] Anti-Twist plate 50 mm with 1 x 1/4“ and 1 x 3/8“ screw, 90° offset mounting possibleOrder code: | QPL-AT1size: | 2“ x 1.7“Weight: | 2 oz.
[10] Video plate with special video pin and 1 x 1/4“ screw, 90° offset mountig possibleOrder code: | QPL-ViDEOsize: | 2“ x 1.7“Weight: | 2 oz.
[11] Anti-Twist plate 70 mm with 1 x 1/4“ and 1 x 3/8“ screw, 90° offset mounting possibleOrder code: | QPL-AT2size: | 2.8“ x 1.7“Weight: | 2.5 oz.
[12] Plate for 6x6 medium format cameras, 1 x 1/4“ and 1 x 3/8“ screwOrder code: | QPL 6x6size: | 2“ x 1.7“Weight: | 2.5 oz.
[13] Clamping plate with cross bubble levellerand 1 x 1/4“ screw Order code: | QPL Levellersize: | 6.1“ x 1.7“Weight: | 5.5 oz.
[14] Panorama clamping plate 18 cm with 1 x 1/4“ screw Order code: | QPL PANOrAmA size: | 7“ x 1.7“Weight: | 6.7 oz.
[15] Panorama clamping plate 24 cm with 1 x 1/4“ screw Order code: | QPL PANOrAmA 235size: | 9.4“ x 1.7“Weight: | 7 oz.
[16] Clamping plate 270 with double sided dovetail, 2 x 1/4“ screw Order code: | QPL 270Length: | 10.6“Weight: | 7.4 oz.
[17] Clamping plate 350 with double sided dovetail, 2 x 1/4“ screw Order code: | QPL 350Length: | 13.8“Weight: | 9.5 oz.
[18] Clamping plate 450 with double sided dovetail, 2 x 1/4“ screw Order code: | QPL 450Length: | 17.7“Weight: | 12.3 oz.
TECHNiCAL sPECiFiCATiONs
With the quick releases of the Q=System cameras can be mounted easily and safely at any tripod or ball head with 1/4“ or 3/8“ thread.The Q=System was designed with special emphasis on easy handling and compact dimensions.
The automatic Q=BASE allows locking the camera plate with a simple click. The position can then be adjusted individually. A simple turn of the silver colored ring locks the plate safely. Designed for even heaviest equipment. There is also a safety pin as an extra safeguard to prevent the camera plate from sliding out inadvertently.
A large variety of camera plates (Q=Plates) is available in almost any size to support different types of photo and video equipment.The Q=System is also compatible with plates of many third-party manufacturers (Arca style dovetail). However, the safety pin function is only available while using original NOVOFLEX Q=Plates.
The manual quick release Q=MOUNT complements the Q=System. The round shaped design is a perfect combination of form and function.Extremly fast clamping is guaranteed by the high precise double thread locking mechanism. A simple turn and the plate is locked in place.Like the Q=BASE, also the Q=MOUNT features a safety pin to prevent the camera plate from sliding out accidentally, if the locking knob is not turned completely.
The Q=MOUNT MINI is equipped with the same features and advantages as the Q=MOUNT. Its slim design fits perfectly i.e. bodies of cameras without mirror or point-and-shoot cameras. Highly recommended for use with QPL Slim mounting plates.
PRODUCT INFORMATION
TECHNICAL SPECIFICATIONS
Quick releasesQ=System
NOVOFLEXN
Order code: | Q=BASEDimensions: | Ø 78 mm (3")Height: | 22 mm (0.87")Weight: | 265 g (0.63 lbs)Connection: | 1/4" and 3/8"
Order code: | Q=MOUNTDimensions: | Ø 60 mm (2.36")Height: | 16 mm (0.62")Weight: | 100 g (0.22 lbs)Connection: | 1/4" bzw. 3/8"
Order code: | Q=MOUNT MINISize: | 75x25x15 mm (3×1×0.6 in.)Weight: | 55 g (2 oz.)Connection: | 1/4"
NOVOFLEX Präzisionstechnik GmbHBrahmsstraße 7, D-87700 MemmingenTelefon +49 8331 88 888, Fax +49 8331 47 [email protected], www.novoflex.de
WITH COMPLIMENTS
QUICk RELEASES_
Q=BASE | AUTOMATIC QUICk rELEASE
Q=MOUNT | MANUAL QUICk rELEASE
Q=MOUNT MINI | MANUAL QUICk rELEASE__
_
_
_
_
Q=PLATE
550/
E/04
.11/
AD
Q=BASE
Q=MOUNT MINI
Q=MOUNT
TECHNICAL SPECIFICATIONS ARE SUBjECT TO CHANGE WITHOUT NOTICE.
Quick releasesQ=System
TECHNICAL SPECIFICATIONS
Order code: | Q=MOUNT MINI DWeight: | 70 g (2.5 oz.)Size: | 90 x 25 x 20 mm (3.5 × 1 × 0.8 in.)Connections: | Q=System
Order code: | Q=MOUNT DWeight: | 120 g (0.3 lbs)Size: | 90 x 60 x 20 mm (3.5 x 2.4 x 0.8 in.)Connections: | Q=System
Order code: | Q=MOUNT DCWeight: | 120 g (o.3 lbs)Size: | 75 x 75 x 20 mm (3 x 3 x 0.8 in.)Connections: | Q=System
QUICk RELEASES_
SPECIAL DEVICES __
_
_
_
_
The NOVOFLEX Q=System is completed by 3 quick release bases with double sided clamping.
The Q=MOUNT D and Q=MOUNT DC are two double-sided quick-release bases that facilitate optimal adjustments of the camera. The direction and the clamping of the Q=MOUNT D are parallel to the holder, whereas the direction and the clamping on the Q=MOUNT DC are arranged at an angle of 90° to the holder.
All 3 quick release devices are optimized for use on the Multi-Media-rig System (MMr), but in many cases they can also be combined usefully with the rail system from NOVOFLEX.
PRODUCT INFORMATION
Q=MOUNT D for parallel mountingQ=MOUNT MINI D
Q=MOUNT DC for cross mounting (90°)
The items from this set can be linked and joined in any number of ways and added to as required within the system. They enable you to set up versatile support structures both in the studio and the field.
TECHNISCHE DATEN
Rod set
SYSTEM ACCESSORIES_
STASET | ROD SYSTEM
___
_
_
_
_
NOVOFLEXN
Order code: | STASETWeight: | 370 g (0.81 lbs)
NOVOFLEX Präzisionstechnik GmbHBrahmsstrasse 7, D-87700 MemmingenTelephone +49 8331 88 888, Fax +49 8331 47 [email protected], www.novoflex.de
WITH COMPLIMENTS
820/
E/04
.11/
AD
Rod set
APPLICATION EXAMPLES
ACCESSORIES
The STASET rod set consists of the following items that can be added to as required:
Rod 30 cm (2 pcs)Metal rod, 1/4“ tapped hole at one end, 1/4“ threaded stud at the other end.Order code: | STA 30
Rod 15 cm (1 pc)Metal rod, 1/4“ tapped hole at one end, 1/4“ threaded stud at the other end.Order code: | STA 15
Corner coupling (1 pc)Joins two rods at an angle of 90°.Order code: | MUFFE
Connecting screw (1 pc)For connecting two 1/4“ threaded studs.Order code: | VBSCHRAUBE
Ball head with flash shoe (1 pc)Small but very sturdy flash tilt head with removable flash shoe. Also suitable for large plug-in system flashes.Order code: | M-NEIGER
Holding clip (1 pc)Strong clip with 1/4“ tapped hole.Order code: | KLAMMER
Specimen holder clip (1 pc)Clip for gentle fixing of sensitive materials, with 1/4“ tapped hole.Order code: | PF-KLAMMER
Ground spike (1 pc)Solid spike with 1/4“ threaded stud for fixing in the ground.Order code: | NAGEL
These items can also be supplied singly to upgrade the set.
Additional accessories for the STASET rod set (not included in basic set):
Large clip (for fill-in light panels)Clip with a strong spring for fixing plane objects, with 1/4“ tapped hole.Order code: | KLEMME
Large clip
Survival-Kit
PHOTO-SURVIVAL-KIT_
___
_
_
_
NOVOFLEXN
NOVOFLEXPräzisionstechnikGmbHBrahmsstrasse7,D-87700MemmingenTelephone+49833188888,[email protected],www.novoflex.de
WITHCOMPLIMENTS
APPLICATIONEXAMPLE
Photo-Survival-Kit ThePhotoSurvivalKit(KIT)allowsyoutosolvenearlyallmountingtaskswithonesmallkit.
It consists of various components:tTripodhead,loadcapacityupto3kg(6.6lbs)tMinitripodtSuctioncuptGroundspike
tUniversalclamp,clampingwidth42mm(1.7”)tPlastic-clamptMetalrod15cm(5.9“)tBag
Whetherneedingtoclamporscrewtheitemintosomethingorpositioningitsecurelyonfirmgroundortomountitonsmoothsurfaces,thePhotoSurvivalKit(KIT)offersthesuitabletools,inordertopositionyourcamerasurelyandfirmly.Fastanduncomplicated,thisuniversalsetcanbeused,sowhentakingalongalargetripodistoounwieldy,tooheavyorsimplynotplannedase.g.whengoingonabikingortrekking-trip.Suppliedinabag.
TECHNICALDATA
Ordercode: |KITDimensionsBag: |265mmx190mmx30mm(10.4“x7.5“x1.4“)Weight: |600g(1.3lbs)
The tilt/shift bellows rounds out NOVOFLEX‘s comprehensive offering of high-end bellows. Following on the NOVOFLEX BALPRO 1 univer-sal bellows, the BALPRO T/S provides a perfect tilt/shift bellows system for cameras up to a 6 x 7 cm format. The tilt and shift functions are just what professional photographers have been waiting for. The combination options are practically inexhaustible: virtually all 35 mm and medium-format lenses as well as special lenses can be used with nearly all 35 mm and many medium format cameras up to 6 x 7 cm. Canon EOS systems even support full transfer of all data between camera and original lens via a special accessory. High-precision controls, an attractive design and high-calibre manufacturing make this the perfect macro add-on. The NOVOFLEX BALPRO T/S provides a tilt and shift function at the front and back of the bellows; the standard adjustment is 26 mm horizontally, the rotation 15° left and 15° right. In normal shooting position, you can take ideal photographs according to Scheimpflug. Turn the bellows by 90° to portrait format to compensate for converging lines.NOVOFLEX offers two special lens heads (APO DIGITAR) by Schneider in Bad Kreuznach, which are optimized for digital cameras. These lens heads are flush-mounted permanently on the bellows.
2 focal lengths are available: SCHNEIDER Apo-Digitar 4,0/80 mm Order code: | PRO-APO-DIGI 80 SCHNEIDER Apo-Digitar 5,6/100 mm Order code: | PRO-APO-DIGI 100
The lenses allow adjustment to infinity with all cameras. 35mm SLR cameras require the 80 mm lens head, the Mamiya 645 the 100 mm lens head. The setting for 35 mm cameras ranges from infinity to 1.8x enlargement.
PRODUCT INFORMATION
TECHNICAL sPECIFICATIONs
Tilt/shift bellows
NOVOFLEXN
Order code: | BALPRO T/SLength: | 200 mm (7.87”)Width: | 120 mm (4.72“)Heigth: | 185 mm (7.28”)Weight: | 975 g (2.14 lbs)
NOVOFLEX Präzisionstechnik GmbHBrahmsstrasse 7, D-87700 MemmingenTelephone +49 8331 88 888, Fax +49 8331 47 [email protected], www.novoflex.de
WITH COMPLIMENTs
TILT/sHIFT BELLOWs_
BALPRO T/s | TILT/SHIFT BELLOWS | CAMERA ADAPTER | LENS ADAPTER | SCHNEIDER LENS HEAD
___
_
_
_
_
Tilt/shift bellows
ACCESSORIES
NOVOFLEX offers two special lens heads (APO DIGITAR) by Schneider in Bad Kreuznach for the BALPRO 1 bellows, which are optimized for digital cameras.These lens heads are flush-mounted permanently on the bellows.2 focal lengths are available:
SCHNEIDER Apo-Digitar 4,0/80 mm Order code: | PRO-APO-DIGI 80 SCHNEIDER Apo-Digitar 5,6/100 mm Order code: | PRO-APO-DIGI 100
The lenses allow adjustment to infinity with all cameras. 35mm SLR cameras require the 80 mm lens head, the Mamiya 645 the 100 mm lens head. The setting for 35 mm cameras ranges from infinity to 1.8x enlargement.
CONNECTIONS FOR BALPRO 1 AND BALPRO T/S
35mm SLR Camera BALPRO 1 – Adapter BALPRO T/S
CANON EOS * | CANA-AF and APRO oder PROshift+CANON FD | CANA and APRO oder PROshift+CONTAX/yASHICA | CONTA and APRO oder PROshift+FOUR THIRDS | OMA-DIGI and APRO oder PROshift+LEICA-R | LEA-R and APRO oder PROshift+M 42 | COA and APRO oder PROshift+MICRO FOUR THIRDS | MFTA and APRO oder PROshift+MINOLTA | MINA and APRO oder PROshift+MINOLTA-AF / SONy α | MINA-AF and APRO oder PROshift+NIKON | NIKA and APRO oder PROshift+OLyMPUS OM | OMA and APRO oder PROshift+PENTAX, SIGMA | PENTA and APRO oder PROshift+ROLLEI SL 35 | ROLA and APRO oder PROshift+SAMSUNG NX | NXA and APRO oder PROshift+SONy NEX | NEXA and APRO oder PROshift+
6x6 MF Camera BALPRO 1 – Adapter BALPRO T/S
CONTAX 645 | CONTPROEXAKTA 66 | EXPROHASSELBLAD 2000/205 | HAPROMAMIyA 645 | MAMPROPENTAX 645 | TAXPROPENTAX 67 | PENTPRO
35mm Lens BALPRO 1 – Adapter BALPRO T/S
CANON EOS * | *CANON FD | LEICAN and PROLEICONTAX/yASHICA | LEICONT and PROLEIC-MOUNT | LEICE and PROLEILEICA-THREAD | PROLEILEICA-R | LEI-F and PROLEILEICA-M | LEI-M and PROLEIM 42 | LEICO and PROLEIMIKROSKOP-OBjEKTIVE | LEIMIK and PROLEIMINOLTA MD | LEIMIN and PROLEINIKON AI, AF | LEINIK and PROLEINIKON G ** | LEINIK NT and PROLEIOLyMPUS OM | LEIOM and PROLEIPENTAX | LEIPENT and PROLEI
6x6 Lens BALPRO 1 – Adapter BALPRO T/S
EXAKTA 66 | PROEXHASSELBLAD 2000/205 | PROHAMAMIyA 645 | PROMAMPENTAX 645 | PROTAXPENTAX 67 | PROPENT
Adapter for Baluni bellows rings | UNIPROShift-Adapter | PROshift+
* To get an automatic bellow for Canon EOS you need the following combination to connect:| EOS-RETRO | EOS/PRO | PRO/EOS
** adapter with stop-down function
Uniklem
MINI TRIPOD_
UNIkleM | UNIVERSAL CLAMPS |MAgICbALL |FORKED-JOINT
UNIkleM 26 | UNIVERSAL CLAMPS |bALL 19/P |NEIgER 19/P
UNIkleM 42 | UNIVERSAL CLAMPS |bALL 19/P |NEIgER 19/P
___
_
_
_
_
NOVOFLEXN
NOVOFleX Präzisionstechnik GmbHBrahmsstraße 7, D-87700 MemmingenTelefon +49 8331 88 888, Fax +49 8331 47 [email protected], www.novoflex.de
wITH cOMPlIMeNTs
230/
e/10
.05/
AD
NOVOFLEX universal clamps are as helpful as a third hand and the ideal accessories for studio and nature photography. Use them to fix items safely and securely to things like panels, doors, tables, windows, pipes, branches, fences, ladders or tripod legs. Use them when you have no tripod to hand or when space is too tight to use one.
The clamps also make excellent car window tripods. All three clamps provide a screw-on fitting, offset at 90°, for ball heads, cameras, lights, flash units and accessories. They can be attached to bikes, canoes or sailing boats, making them indispensable in sports photography. The universal clamps do an equally good job in non-photographic situations. For example, two clamps combined with a ball 19 can be used to position and fix light barriers or torches.
In product photography, a MicroPod, ball 19 and universal clamp combine to form a flexible helper for positioning light panels, plates or objects.
PRODUcT INFORMATION
Uniklem
APPlIcATION eXAMPles
UNIkleMThe large universal clamp has two 1/4“ camera studs offset by 90° and can be used for large and heavy ball heads. The rubber lining on the inside and underside of the clamp makes for gentle yet secure mounting on car windows. There‘s an extra 1/4“ hole for attaching a support like a monopod (bb-Stock). The two knurled wheels offset by 90° make for fast mounting of cameras or ball heads.
TecHNIcAl DATA
Order code: | UNIKLEM | UNIKLEM 42 | UNIKLEM 26Dimensions: | 105 x 75 x 65 mm | 74 x 44 x 30 mm | 58 x 40 x 30 mm weight: | 535 g | 170 g | 145 gMax. grip: | 62 mm | 42 mm | 26 mmcamera connection: | 2 x 1/4“ | 2 x 1/4“ | 2 x 1/4“
UNIkleM 26With a maximum grip of 26 mm, the small universal clamp has many different uses, eg, on a small ball head on a tripod for ground-level photography. It has two 1/4“ tapped holes offset by 90° and a threaded stud.
UNIkleM 42The mid-sized universal clamp has maximum grip of 42 mm. It has two 1/4“ tapped holes offset by 90° and a threaded stud.
Useful accessories
NOVOFLEX
N
TECHNICAL DATA
Order code: | GAKO
Height: | 110 mm / 4.33”
Fork width: | 125 mm / 4.92”
Weight: | 210 g / 0.46 lbs
NOVOFLEX Präzisionstechnik GmbH
Brahmsstrasse 7,
87700 Memmingen
Germany
phone +49 8331 88 888, fax +49 8331 47 174
mail@novo#ex.de, www.novo#ex.com
WITH COMPLIMENTS
FORKED JOINT
BEAN BAG
CHECK CARDS
__
_
_
_
FORKED JOINTThe GAKO offers additional support when using long lenses, spotting scopes, etc. With the base rigidly attached to a tripod, the fork
permits a full 360° turn, allowing the user to continuously follow moving objects without sacri#cing the overall stability of the system.
TECHNICAL DATA
Order code: | TELESACK
Dimension: | approx. 200 ×200 mm
Weight, w/o $lling: | 60 g / 2.1 oz
Volume: | 800 g dried beans
Delivery w/o $lling
TECHNICAL DATA
Order code: | ZEBRA
Dimensions: | 20 × 15 cm (7.9 × 5.9 in)
Order code: | ZEBRA XL
Dimensions: | 21 × 30 cm (8.3 × 11.8 in)
BEAN BAGThis leather bag can be #lled with dried beans and as such is an ideal work
platform for macro photography. It is capable of suppressing vibrations, ma-
king it a useful additional support for telephoto lenses, bellows, etc.
CHECK CARDThe %exible check card, made of a special polymer, has an antire%ection coating on both sides:
one side white, the other grey. The grey side serves as reference area for exposure metering while
the white side enables correct white balance that is so important in digital photography. Handling
couldn’t be easier. The camera takes a light reading of either side of the check card to perform an
exposure measurement or white balance and, hey presto, the camera is set optimally for the prevai-
ling light conditions to guarantee perfect shots.
The Novo%ex ZEBRA check card is a must-have for every quality-conscious photographer, regard-
less of the medium used to capture images.
STRECH WRAPS_
BLUEWRAP | CAMERA AND LENS PROTECTION
___
_
_
_
_
A popular series of innovative wraps made of blue neopren, a highly elastic material (up to 30%) for optimal wrapping of cameras and lenses. High-quality velcro fasteners over the full overlap. These wraps are highly recommended as reliable protection for your valuable equipment. Colour: outside: light blue, inside: dark blue. Available in four sizes.
PRODUCT INFORMATION
TECHNICAL DATA
Wraps
NOVOFLEXN
NOVOFLEX Präzisionstechnik GmbHBrahmsstrasse 7, D-87700 MemmingenTelephone +49 8331 88 888, Fax +49 8331 47 [email protected], www.novoflex.de
WITH COMPLIMENTS
Wrap size: S Order code: | BLUEWRAP S Size: | 20 x 20 cmIdeal for: | Small cameras, | cell phones, accessories
Wrap size: MOrder code: | BLUEWRAP MSize: | 28x28 cmIdeal for: | SLR bodies and small lenses, | flash units, small camcorders
Wrap size: L Order code: | BLUEWRAP LSize: | 38x38 cmIdeal for: | Telephoto lenses, cameras with | small lenses, camcorders
Wrap size: XL Order code: | BLUEWRAP XL Size: | 48x48 cmIdeal for: | Cameras with large telephoto lenses
QuadroPod®
Das neue Stativsystemder vierten Dimension
The new Camera Support Systemof the fourth dimension
DiE KöPFE / The BaSeS
DiE STATiVBEiNE / The LegS
QuadroPod Basic QP BQuadroPod Basic QP B
QuadroLeg, Aluminium, 3 SegmenteQuadroLeg, aluminum, 3 segmentsQLEG A2830
4 St. QuadroLeg, Aluminium, 3 Segmente4 pcs. QuadroLeg, aluminum, 3 segmentsQLEG A2830 SET
QuadroLeg, Carbon, 3 SegmenteQuadroLeg, carbon, 3 segmentsQLEG C2830
4 St. QuadroLeg, Carbon, 3 Segmente4 pcs. QuadroLeg, carbon, 3 segmentsQLEG C2830 SET
QuadroLeg, Carbon, 4 SegmenteQuadroLeg, carbon, 4 segmentsQLEG C2840
QuadroLeg, Aluminium, 4 SegmenteQuadroLeg, aluminum, 4 segmentsQLEG A2840
4 St. QuadroLeg, Aluminium, 4 Segmente4 pcs. QuadroLeg, aluminum, 4segmentsQLEG A2840 SET
4 St. QuadroLeg, Carbon, 4 Segmente4 pcs. QuadroLeg, carbon, 4 segmentsQLEG C2840 SET
QuadroLeg, WanderstockQuadroLeg, walking stickQLEG A1830 Walk
4 St. QuadroLeg, Wanderstock4 pcs. QuadroLeg, walking stickQLEG A1830 Walk SET
QuadroLeg, MiniQuadroLeg, miniQLEG A1010 Mini
4 St. QuadroLeg, Mini4 pcs. QuadroLeg, miniQLEG A1010 Mini SET
QuadroPod mit Mittelsäule QP CQuadroPod with center column QP C
QuadroPod Variabel QP VQuadroPod variable QP V
QuadroPod® System
QP VQ LEG A2830 SET
QP V3 Q LEG A2830
QP BQ LEG A2840 SET
QP CQ LEG A2840 SETCB 3
QP BQ LEG A1010 Mini SET
QP BQ LEG A1830 Walk SET
QP CQ LEG A2840 SETClassicBall CB 3( Repro-Stellung / Repro position )
QP B2 Q LEG C28302 Q LEG A1010 Mini
MONOPOD
Einbein-Stativaufsatz für QLEGMonopod plate for QLegQP MONO
ZuBEhöR
Stange 15 cm oder 30 cmextension rod 5.9 “ oder 11.8 “STA 15 | STA 30
Kurzer flexibler Arm 26 cmshort flexible arm 10.2 “ARM-K
Flexibler Arm 45 cmflexible arm 17.7 “ARM
SaugstativSuction podSP
Saugstativ + BALL 19Suction pod + BaLL 19SP STATiV
Verbindungsknopf f. QLEG Fuß M 10 / 1/4 “Connector for QLeg bottom M 10 / 1/4 “QP RED M 10
Reprostange für QuadroPod15 cmRepro rod for QuadroPod 5.9“MS-REPRO-VL
1/4 “ Verbindungsstück1/4 “ connectorQP RED 1/4 “
Große KlemmeBig ClampKLEMME
halteklammerMini ClampKLAMMER
Klemmstativ 42 mm SpannbreiteClamp mount 1.65 “uNiKLEM 42
Kugelneiger mit AuflagetellerSmall ball head with plateBALL 19
Kugelneiger mit BlitzschuhSmall ball head with flash-shoeNEiGER 19
Diese Broschüre hilft Ihnen, das QuadroPod genau nach den individuellen Anforderungen zusammenzustellen.
This brochure helps you to select the proper QuadroPodaccessories depending on the individual demands.
Aufbaubeispiel / example: QLEG C2840 QP MONO BALL 30
QuadroPod® System
QP B2 QP RED 1/4“2 SP STATiV2 STA 152 BALL 192 uNiKLEM 42
QP B2 Q LEG C28402 STA 302 BALL 192 uNiKLEM 42MagicBall MB 50
QP B2 Q LEG C28302 STA 152 BALL 192 uNiKLEM 42ClassicBall CB 5
QP BQLEG C2840 SETQP RED M 10BALL 19uNiKLEM 42
QP BQ LEG A1010 Mini SETClassicBall CB 5CASTEL-QQ = PLATE QPL 1
QP BQ LEG A2840 SETSTA 30 + BALL 19 + KLAMMERARM + NEiGER 19ARM + BALL 19 + KLEMMEMagicBall MB 50
QuadroPod®
Technische Angaben / Technical data
| Arbeitshöhen | Gewicht | working heights | weight
QuadroPod® Basic (QP B) mit | 7 – 26 cm | 1080 gStativbeinen „Mini“QuadroPod® Basic (QP B) with | 2.8’’ – 10.2‘’ | 2.4 lbslegs „Mini“
QuadroPod® Basic (QP B) mit | 10 – 155 cm | 2780 gStativbeinen Alu 3 SegmenteQuadroPod® Basic (QP B) with | 3.9’’ – 61’’ | 6.1 lbslegs aluminum 3 segments
QuadroPod® Basic (QP B) mit | 10 – 155 cm | 2900 gStativbeinen Alu 4 SegmenteQuadroPod® Basic (QP B) with | 3.9’’ – 61’’ | 6.4 lbslegs aluminium 4 segments
QuadroPod® Basic (QP B) mit | 10 – 155 cm | 2460 gStativbeinen Carbon 3 SegmenteQuadroPod® Basic (QP B) with | 3.9’’ – 61’’ | 5.4 lbslegs carbon 3 segments
QuadroPod® Basic (QP B) mit | 10 – 155 cm | 2560 gStativbeinen Carbon 4 SegmenteQuadroPod® Basic (QP B) with | 3.9’’ – 61’’ | 5.7 lbslegs carbon 4 segments
Bei der Version mit Mittelsäule (QP C) erhöht sich die maximale Arbeitshöheum 27 cm auf 182 cm, das Gewicht um jeweils 200 g.When using the version with centre column (QP C), the maximum working height is increased 10.6” to 71.6“, the weight of each tripod is 0.44 lbs more then.
Bei der Version „Variabel“ (QP V) erhöht sich das Gewicht um jeweils 150 g.With the version ‚variable’ (QP V) the weight of each QuadroPod is increased 0.33 lbs.
QuadroPod® ist ein eingetragenes Markenzeichen der NOVOFLEX Präzisionstechnik GmbH.QuadroPod ® is registered as a trademark by NOVOFLEX Präzisionstechnik GmbH.
NOVOFLEXPräzisionstechnik GmbHBrahmsstraße 787700 MemmingenGermanyphone +49 8331 88 888fax +49 8331 47 [email protected]
Order Code Bezeichnung / Description
1. STATiVBASEN / BASES
QP B QuadroPod Basic 860 g / 1.9 lbs
QP C QuadroPod Basic mit Mittelsäule / with centre column 1060 g / 2.3 lbs
QP V QuadroPod Variabel / Variable 1080 g / 2.4 lbs
2. STATiVBEiNE / LEGS
Q LEG A 2830 QuadroLeg Aluminium 3 Segmente 480 g / 62 - 156 cm 1.1 lbs / 24.4“ - 61.4“
Q LEG A 2840 QuadroLeg Aluminium 4 Segmente 510 g / 53,5 - 154 cm 1.2 lbs / 21.1“ - 60.6“
Q LEG C 2830 QuadroLeg Carbon 3 Segmente 400 g / 62 - 156 cm 0.9 lbs / 24.4“ - 61.4“
Q LEG C 2840 QuadroLeg Carbon 4 Segmente 425 g / 53,3 - 154 cm 1.0 lbs / 21.1“ - 60.6“
Q LEG A 1010 Mini QuadroLeg Mini 55 g / 20 cm 0.12 lbs / 7.9“
Q LEG A 1830 Walk QuadroLeg Wanderstock / walking sticks 270 g / 65 - 145 cm 0.6 lbs / 25.6“ - 57.1“
QuadroPod®
PANORAMA
NOVOFLEXN
VR-System IIVR-System 6/8VR-System PRO II
Create images beyond the limits of vision or format!
Start shooting at the point where the scene begins and finish where
the scene ends or just reproduce a complete space around you!
Perspective limits, which once were set by the technology of your
camera or your lenses, no longer exist – now it is your challenge
as a photographer!
Panorama(Greek) the panorama, unbroken view of an entire surrounding area.
NOVOFLEX Präzisionstechnik GmbH, Brahmsstraße 7 87700 MemmingenGermanyphone +49 8331 88 888 fax +49 8331 47 [email protected] www.novoflex.de
Panorama photography: Jan Röpenack
Know-how
With the stitching technique, several pictures are taken one after another, with the camera being rotated around a specifi c angle each time. Then, all pictures are merged together witha stitching software, e.g. Panorama Studio, into a complete panoramic image.
Toolbox: Novofl ex PanoramaVR System II, Canon EOS 40D withEF-17-40/4 USM at 40 mm,cylindrical projection, horizontalfi eld of view approx. 120°
Why do I need a panorama head?The panorama head enables the rotation of the system around the centre of the entrance pupil (1) of the lens, also called the “nodal point” or “opticalcentre”. By doing this, shifting of the foreground in relation to the background is avoided which is of vital importance for the completion of the individual images. Only by rotating around the nodal point the stitching software can work accurately, which guarantees optimal results.
How to locate the entrance pupil?Quite simple - by trial and error! To each Novofl ex panorama head a detailed operating manual is attached. We recommend that you note the values you have found for each lens for later shooting. Exact scales on the plates andthe focusing rack guarantee quick and effi cient adjustment of the panorama head before shooting.
Advice:With wide-angle lenses, the entrance pupil is usually located some millimetres behind the front lens towards the camera. With normal or tele lenses, the entrance pupil moves backwards as the focal length increases.
Entrance pupil = turning point
Turn to the right without panorama headThe foreground (fl ower) moves to the left towards the back-ground (mountain). This will cause problems when assem-bling the panorama.
Turn to the right with panorama headThe foreground (fl ower) stays properly positioned with the background (mountain). This is the requirement for accurate stitching of the panorama.
Wrong
Right
(1)
NOVOFLEX ClassicBall 5 (not included in the scope of delivery)
The Classic: VR-System II
Application:Suitable for single row cylinderical or flat panoramas. Depending on camera and lenses, field of view up to 360° horizontally and 120° vertically are possible. Recommended lenses: Wide-angle lenses with minimum 10 mm focal distance, standard zooms up to tele lenses up to 135 mm focal length.
New in release II:The panorama plate is now equipped with the Q dove-tail clamp. The system is easily seperated into several pieces for transport and the focusing rack is ready for other photographic tasks.
Advantages:• Simple,handysystem• Theindividualpartscanbeusedforothertasksaswell• All-in-onesolution:Apartfromthehardware,the
stitching software PanoramaStudio is also included (unlimited full version).
For whom?The new panorama VR-System II was developed for the photographer, who prefers the classic, single row cylindrical or flat panorama and who appreciates the simple and handy design of the system. It is of special interest for nature photographers doing panoramic shooting as well as macro and landscape photography, using the focusing rack and L bracket for other tasks, too.
Advice:We recommend to keep the constancy of aperture, exposure time, white balance and focus during the whole shooting.
Toolbox: Novoflex Panorama VR System II, CANON EOS 40D with EF-S 17-85/4-5.6 IS USM at 17 mm, 9 images, cylindrical projection, horizontal field of view 360°.
NOVOFLEX ClassicBall 3 (not included in the scope of delivery)
The Specialist: VR-System 6/8
Brand-new:Optimised for fisheye lenses the new VR-System 6/8 enables horizontal and vertical rotation around the nodal point of the lens with two click-stop-panorama bases. Increments of 45° and 60° each, as well as steplessrotation can be set up. If the images are taken at every second click-stop, additional increments of 90° and 120° are possible. The system is sized to allow a complete vertical rotation of the camera. Each panning base is construced very small and equipped with an integrated spirit-level, so it doesn´t intrude into the picture.Thanks to the milled-out portion of the L-bracket the spirit-level can be seen from above. The front locking screw can be removed and is only needed in case of stepless adjustment. Due to its size and stability of the head a professional D-SLR camera can be used.
Advice:To avoid lens flares if you want to include the sun in the panorama: Center the first image as precisely as possible directly into the sun. The sun should not appear again in the next images. Always use a lens hood! A low sun position is very helpful if you are taking pictures within a horizontally aligned row.
Toolbox: Cubic reproduction of a panorama with 360° x 180° field of view. Novoflex Panorama VR System 6/8, CANON EOS 450D with Sigma 8 / 3.5 Fisheye, 6 images.
Details:The upper panorama base slides in the guide rail of the L-bracket, making additional adjustments of the base unnecessary when changing the height. Both bases are equipped with click-stops and include aspace-saving built-in spirit-level. The locking screws are removable if needed.
For whom?The Panorama VR-System 6/8 is the solution for photographers specialised in spherical panoramas for internet applications, virtual tours etc. The utilisation of a fisheye lens reduces the number of required images for a complete spherical panorama (360° x 180°) to three to eight images (depending on the focal distance and the crop factor). Thus, a high-quality result can be achieved quickly and efficiently.
NOVOFLEX ClassicBall 3 (not included in the scope of delivery)
The professional allrounder:VR-System PRO II
Application:The VR-System PRO II enables the parallax-free, horizontal and vertical pivoting around the nodal point of the lens. It is designed for multi-row panoramas in perspective- corrected flat or spherical projection. Due to the lower panorama base that can be moved in eight adjustable increments, classic single-row cylinder panoramas can easily be done as well. Comfort, stability and precision are the main features of this professional panoramic head.
New in release II:The upper panorama base is now equipped with click-stops for two selectable increments (45° and 60°). The L-bracket was enlarged and stabilised. The upper clamping plate was also lenghtened and includes a movable anti-twist camera stop.
For whom?The Panorama VR-System PRO II is the perfect solution for professional photographers dealing with all facets of panoramic photography. The VR-System PRO II masters all varieties from spherical panorama, perspective-corrected flat panoramas or classic cylindrical panoramas, even when heavy professional DSLR equipment is used.
Advice:Use a remote-control release and the mirror-up exposure or LiveView of your camera!
Toolbox: Tele panorama Novoflex VR-System PRO II, 10° steps (increment selector at position 36), vertical downtilt of 10°, CANON EOS 5D with EF 135/2.0 L USM, 17 images, 110MP.
NOVOFLEX ClassicBall 5 (not included in the scope of delivery)
Example 2There is an easy panoramic solution for the problem of “convergent lines in the field of architectural photography“. Simulate a digital shift lens, e.g. as in this case with a 19 mm focal length by using software! Due to the multiple individual images you get resolutions that are higher than those of digital backs.
Example 1Spherical panorama without fisheye: 16 images in 3 layers with a „normal“ 17 mm wide-angle lens and a full-format camera create a cubical, respectively spherical panorama covering the complete space (360° x 180°) in enormous resolution.
Toolbox: 100 % corrected lines. CANON EOS 5D with 40 mm lens, 60 Megapixel, software PTGui.
Single frame without panoramatechnique from the same position.CANON EOS 5 D with 19 mm lens, 12.8 MPixel.
Types of projection
Cylindrical projection(ideal for wide field of view)
On the right photo you see the most common projection type, the cylindrical projection. The advantage here is that you can also create pano- ramas with a large horizontal field of view up to 360°. Imagine yourself standing in the centre of a cylinder looking at the surface from inside. Reproducing a cylindrical panorama on a flat surface, e.g. as a print, horizontal lines, except the horizon itself, will appear curved and even more so the further they are away from the hori-zon. With wider fields of view this is clearly visi-ble – refer to the photo of the Brandenburger Tor.
Flat projection(The habitual perspective)
In the case of smaller field of views the alterna-tive is flat projection, where bending of lines is avoided. In this type of reproduction a classic wide-angle or super wide-angle on a “normal“ camera is digitally simulated. In case of an extreme wide field of view, however, distortions of objects at the image borders show the so-called “super wide-angle effect“. This is not a fault of the lens, but reflects the natural repro-duction with a very wide optic. With flat pro- jections only a picture perspective of less than 180° can be reproduced. The reason is that on flat surfaces only objects can be reproduced that are in front, but not that are positioned behind or beside the camera can be captured.
Spherical projectionFor the whole space!
For panoramas that reproduce the whole space of 360° x 180°, spherical or cubical projections are the first choice. These panoramas are most-ly used for internet presentations rather than for print. They are integrated into the website with Java, Flash or Quicktime players. The visitor can move interactively in the panorama, seeing just a part in the flat into that he is used to. Several examples are presented on the internet at www.pixelrama.de
Which projection type should be used? This decision depends on the field of view, the scene and your own choice. By the way: You do not need to make this decision when taking the pictures. This can be made later on at your computer, where you can compare the different variants. Generally speaking, the following is recommended:Small field of view = flat projectionWide field of view = cylindrical or sphericalprojection.
Cylindrical projection (200°, horizontal field of view, curved lines)
Flat projection (140°, horizontal field of view, straight lines, wide-angle distortion at the picture border)
Reproduction as a cubical panorama with six square faces.
Spherical projection with 360° horizontal and 180° vertical picture field of view
Advice:The stitching software PTGui is one of the few programmes offering all of the projection types presented on this page.
Panorama heads and plates
Panoramaheads
Panorama VR-System II Panorama VR-System 6/8 Panorama VR-System PRO II
Panorama plates / Click-stopps
1x Panorama=Q / no 1x Panorama=Q 6/8 / yes1x Panorama=VR / yes
1x Panorama=VR / yes1x Panorama=Q PRO / yes
Delivery scope Panorama base Panorama=Q,focusing rack Castel Q (length 20 cm), L-bracket QPL-Vertikal, spirit-level for flash shoe, software PanoramaStudio, manual on CD
Panorama bases Panorama=Q 6/8 and Panorama=VR for L-bracket QPL VR-PRO, clamping plate QPL-PANORAMA, spirit-level for flash shoe, printed manual
Panorama base Panorama=Q PRO with click-stops, L-bracket QPL-VR PRO (23 x 23 cm),Panorama base Panorama=VR with click-stops 6/8, clamping plate QPL-Panorama, spirit-level for flash shoe, printed manual
Suitable lenses Focal lengths from 10 to 135 mm Fisheye, super wide-angle lenses on full-format cameras
Focal lengths from 10 to 300 mm
Adjustment in optical axle 125 mm 150 mm 150 mm
Image reproduction Single row Single and multi row Single and multi row
Panorama type Flat and cylindrical projection Spherical projections and other projection types derived from it
Flat, cylindrical and spherical projection
Recommended software PanoramaStudio (included in the scope of delivery, for cylindrical projection only), PTGui
PTGui, Photoshop PTGui, Photoshop
Weight 960 g (2.1 lbs) 1230 g (2.7 lbs) 1690 g (3.7 lbs)
Camera / tripod fitting 1/4“ resp. 3/8“ / 1/4“ 1/4“ resp. 3/8“ / 1/4“ 1/4“ resp. 3/8“ / 1/4“
Order code VR-SYSTEM II VR 6/8 VR-PRO II
Panoramabases andplates
Panorama Panorama=Q Panorama=Q 6/8 Panorama=Q PRO
Scale 360° in 10° steps 2 x 180° in 10° steps 360° in 10° steps 360° in 10° steps
Click-stops No No 360° stepless60° with 6 steps45° in 8 steps
360° stepless, 60° in 6 steps45° in 8 steps, 36° in 10 steps,30° in 12 steps, 24° in 15 steps20° in 18 steps, 15° in 24 steps, up to 10° in 36 steps
Quick-release No Yes, Q=Mount Yes, Q=Mount Yes, Q=Mount
Spirit-level Yes Yes Yes Yes, crossed spirit-levels
Dimensions 90 x 60 mm (3.6 x 2.4“) 93 x 60 mm (3.7 x 2.4“) 75 x 60 mm (6.7 x 2.4“) 140 x 86 mm (5.5 x 3.4“)
Height 18 mm (0.7“) 33 mm (1.3“) 33 mm (1.3“) 35 mm (1.4“)
Weight 170 g (0.4 lbs) 260 g (0.6 lbs) 270 g (0.6 lbs) 630 g (1.4 lbs)
Camera / tripod fitting 1/4“ resp. 3/8“ / 1/4“ 1/4“ resp. 3/8“ / - 1/4“ resp. 3/8“ / - 1/4“ resp. 3/8“ / -
Order code PANORAMA PANORAMA=Q PANORAMA=Q 6/8 PANORAMA=Q PRO