NOVOCON T 100 R · NOVOCON T 100 R CONTROL UNIT FOR INDUSTRIAL SECTIONAL DOORS THE SET...
2
NOVOCON T 100 R CONTROL UNIT FOR INDUSTRIAL SECTIONAL DOORS THE SET Microprocessor control unit Connecting cable with CEE-plug (16 A) Adapter for retrofitting to foreign operators Fastening materials SET Name Item no. NovoCon T 100 R (DES) 153315-01-1-50 NovoCon T 100 R FU 1.5 kW 153350-01-1-50 NovoCon T 100 R FU 3 kW 153351-01-1-50 AT A GLANCE Suitable for plug-on shaft operators with 230 / 400 V Version DES for motors with digital limit switch Control unit also available in 2 FU versions (1.5 kW and 3 kW) Display-supported menu navigation Clearly arranged 3-button programming Impulse operation DES
Transcript of NOVOCON T 100 R · NOVOCON T 100 R CONTROL UNIT FOR INDUSTRIAL SECTIONAL DOORS THE SET...
NOVOCON T 100 RCONTROL UNIT FOR INDUSTRIAL SECTIONAL DOORS
THE SET
Microprocessor control unit
Connecting cable with CEE-plug (16 A)
Adapter for retrofitting to foreign operators
Fastening materials
SET Name Item no.
NovoCon T 100 R (DES) 153315-01-1-50
NovoCon T 100 R FU 1.5 kW 153350-01-1-50
NovoCon T 100 R FU 3 kW 153351-01-1-50
AT A GLANCE
Suitable for plug-on shaft operators with 230 / 400 V
Version DES for motors with digital limit switch
Control unit also available in 2 FU versions (1.5 kW and 3 kW)
Display-supported menu navigation
Clearly arranged 3-button programming
Impulse operation
DES
POWER AND PERFORMANCE
Suitable forPlug-on shaft operators with motor performance up to 0.8 kW (230 V) and 1.1 kW (400 V)
Supply voltage1~230 V AC / 3~230 V / 3~400 V AC(+10%, -15%) 50 Hz
Power consumption < 40 W
Stand-by power consumption < 5 W
Maintenance cyle Pre-selection door adjustable
Service setup Selectable
Partial opening Programmable
Special functionsElectronic brake, automatic closing, RWA, entry blockade, state relay
Plug-and-play solutionDC module, , radio system closing edge
FUNCTIONS
Radio control Radio receiver optionally
Lighting Programmable
Light barrier LS 2, LS 4, light curtain
Door end positionOn top and at bottom program-mable, fine tuning possible (DES)
OperationImpulse OPEN / CLOSE,automatic closing
Special functions N/A
Channel function Two-way release
Signal lamp operation A 800 III
Protection category IP 54 (IP 65 available)
DETAILS
Packaged dimensions (H/W/D) 48.0 / 24.0 / 17.0 cm
Packaged weight 3.01 kg
Colour of the housing RAL 7024 (graphit-grey)
Front cover Fold-away to both sides
Cycle counter door Readable
Operation hour counter (door) Readable
Door stopping distance correction Programmable
Door interlock N/A
Operating temperature - 20° C / + 55° C
Closing-edge safety device Programmable
Error-handler Readable
Factory-setting Reset possible
OPERATORS FOR INDUSTRIAL DOORS // NOVOCON T 100 R
Compatible accessories are available separately. Subject to be changed.
182
117
219
282
256
