Company ProfileCompany Profile

TAKO (Johor) Sdn Bhd

• Incorporation Date - 14 September 2007

• Registration No. - 788495-U

• Shareholding - TAKO Astatic Technology Sdn Bhd

• Ownership - 100% Malaysian Owned

• Business Objective - To market and promote new invented ESD range of products.

Singapore TAKO Clean Products (S) Pte Ltd Thailand TAKO (Thailand) Co Ltd India Cir-Q-Tech TAKO Technologies

Ptv Ltd Philippines ESD Technology & Mfrg

Corporation China TAKO Astatic Technology of

Shanghai Hong Kong A-Static Cleanroom Technology

Ltd Kuala Lumpur TAKO RBS (M) Sdn Bhd Melaka, Malaysia TAKO Advanced

Technology (M) Sdn Bhd

Associated Companies

AchievementAchievement

Is your ESD shoe meets your Is your ESD shoe meets your customer’s expectation or customer’s expectation or

specification?specification?

S20.20 requirements

i) <35 x 10e6 Ω test (STM 97.1)

ii) <100V test (STM 97.2)

What is the future ESD What is the future ESD roadmaproadmap

&&Your ESD control Your ESD control

strategy?strategy?

ESDA – Personal grounding requirementESDA – Personal grounding requirement

Just to make sure that you are here before your competitors do !Just to make sure that you are here before your competitors do !

ESDA White Paper - Industry Council on ESD Target levelsESDA White Paper - Industry Council on ESD Target levels

Review of Industry Council on ESD Target levelsReview of Industry Council on ESD Target levels

How to achieve How to achieve <50 V<50 V body voltage with body voltage with 1 – 2 1 – 2

MMΩ body-to-ground body-to-ground

resistance? resistance?

A Novel ESD A Novel ESD technology…technology…

Zap-Up* ESD SolutionZap-Up* ESD Solution

What is Zap-Up* ?What is Zap-Up* ? Zap-Up* is a simple self-lock strap that is used to convert Zap-Up* is a simple self-lock strap that is used to convert

normal shoe to an ESD shoe quickly & easily. normal shoe to an ESD shoe quickly & easily.

Zap-Up* electrically connects the body of a person to an Zap-Up* electrically connects the body of a person to an ESD floor to safely drain away any static charge that may ESD floor to safely drain away any static charge that may reside on a person’s body in walking or standing positions. reside on a person’s body in walking or standing positions.

SpecificationSpecification Zap-Up* StrapZap-Up* Strap

Drawings :-Drawings :-

Material :-Material :-- Rubber strap- Conductive thread

Electrical resistance : 1x10e6 to 2x10e6 Ohm (ANSI/STM 97.1)Electrical resistance : 1x10e6 to 2x10e6 Ohm (ANSI/STM 97.1)

Different between Zap-Up* Different between Zap-Up* & Standard ESD shoe& Standard ESD shoe

Zap-Up* Standard ESD Shoe

1. Price Cheaper More Expensive

2. ANSI/ESD S20.20 Meets life-time compliance May/may not meet compliance

3. Elec Resistance Better (1MΩ to 2 MΩ) Typically 10e6 to 10e8Ω

4. Body Voltage Less than 50V More than 100V

5. ESD Permanency Permanent for life Often non-permanent with migratory additive

6. Safety Complied to S20.20 electrical hazard limit May/ may not complied to S20.20

ESD Shoe Resistance Test ESD Shoe Resistance Test (ANSI/ESD STM 97.1)(ANSI/ESD STM 97.1)

1 to 2 MΩ show completely a person’s body-to-ground test

Walking TestWalking Test(ANSI/ESD STM 97.2)(ANSI/ESD STM 97.2)

Comparison between Zap Up & Comparison between Zap Up & Standard ESD shoeStandard ESD shoe

Installation GuideInstallation GuideJust hook & strap up in 10 seconds or less !Just hook & strap up in 10 seconds or less !

Simpler, Faster & NeaterSimpler, Faster & Neater

Zap-Up* with ANY ordinary Zap-Up* with ANY ordinary footwear to out-perform footwear to out-perform

your competitors !your competitors !

www.esdconsultancwww.esdconsultancy.comy.com

Thank You ! Thank You !