Notice Inviting Tenders for Supply of Machinery/Equipment/Raw ...
-
Upload
truongtuyen -
Category
Documents
-
view
223 -
download
1
Transcript of Notice Inviting Tenders for Supply of Machinery/Equipment/Raw ...
Copy to the: 1. Deputy Commissioner, Kupwara with the request to kindly upload the notice on the Kupwara web
portal. 2. Director Technical Education Department, Government of Jammu and Kashmir for information. 3. Chairman, IMC of ITI Kupwara for information. 4. Joint Director, Information Department Srinagar with the request to eet it published in at least three
popular newspapers, (preferably Greater Kashmir, The Excelsior, Tamel-e- lrshad of the J & K for three consecutive days and three popular national newspapers (preferably The Times of India, Indian Express, The Hindu) for the three consecutive days.
5. Deputy Director, Technical Education Department (Kashmir Province) for information. 6. Members, IMC of ICupwara. 7. Directorate Office, lo-charge Website for displaying It on the Offlclal Website otthe Di~aorate. 8. Dlrectorate Office, to publish it on Notice Board of Directorate Office, 9. Deputy Directorate Tech. Edu. Office to publish it on Notice Board of Deputy Directorate. 10. concero fill!. 11. Main notice Board, rTI Kupwara.
upw::iril
Institute Mana ment Cnmmittee Industrial r ining Institute
The tender document •long with TP.rm< and conditions can be had from the office of undersigned upto 18"' December 2015, 2:00 pm against non-refundable payment of Rs. !;>00.00 cash or by Postal Order or pay Order or by DD favouring Member Secretary, IMC or IT1 Kupwam. The agency having experience In the field may send their offer addressing to undersigned on working days by or before 2s•1 December 2015 uoto 2.00 prn, NIT No.: 01 of201S Dated: 03 December 2015 No. ITl/Kup/Actt/2(}.lS/3&2-72 Dated: 03/12/2015
s. Daseription Scheme Earnest Money Cost of Tender
No. Document _ 2"..6 of the package for which
01 Supply of Machinery I
VTIP bidder I tenderer intend to 500.00 Equipment I Raw material quote (Minimlim earnest money (Non-refundable)
Js shown against each package)
Cover -2, Financial Bid of only those bidders will be entertained who qualify pre-qualiftcation bid. IMC reserves the right to accept or reject any or all or part of any or all the tenders without assigning any reason(s).
Envelop 2 / Cover--2 will contain "financial /Price. Oid."
For and on behalf of Chairman IMC of Industrial Training Institute Kupwara sealed offer affixed with
Rs. 10/- revenue stemp are invited from Registered Suppliers I Manufucturcrs I Authorised Dealers for Supply
of "Machinery/ Equipment I Raw Material" ment for trades of Sewing Technology, Mechanic Motor Vehide
and Stenography and Secretarial Assi>l•nl al ITI Kupwara under VTIP Scheme. The bidders shall have to
submittheir bids I tenders in two cover system:
~nvelop l I Cover· 1 will contain "Technical/ Pre Qualiticatioo Bid!
Government of Jammu and Kashmir Industrial Training Institute, Kupwara.
r-------------------------------------------------------------------1
I I
Institute Management Committee
of
Industrial Training Institute
Kupwara
( IMC OF ITI KUPWARA )
Tender Document for
Machinery/ Tools/Equipments meant for the trades of Sewing Technology, Mechanic Motor Vehicle and Stenography and Secretarial Practice
at
Industrial Training Institute,
Kupwara.
NIT NO. : 01 OF 2015
DATED : 03-12-2015
k-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-.:1 I I I I
• '
]_______________________________________________________________________________________________ _ J
r------------------------------------------------------------------- Government of Jammu & Kashmir
Institute Management Committee
Industrial Training Institute ( Kupwara )
Technical Education Department
Phone : 01955252052 Email : [email protected]
No. ITI/Kup/Estt/15/ Date : 03 / 12 / 2015
Terms & Conditions of NIT No. : 01, Dated : 03 .12.2015
1. Tender in response to this invitation shall be submitted in Two Parts in two
separate sealed envelopes. On top of these envelopes containing respective
part, it will be clearly indicated in bold letters :
i. Envelope 1 : “ Pre-Qualification Bid of the tender for Supply of
Machinery/ Tools/Equipments meant for the trade of Sewing
Technology, Mechanic Motor Vehicle and Stenography and
Secretarial Practice” PART - I ( TECHNICAL BID ). Note: The
Mobile No’s, Email ID and name of the person to whom
contact should be clearly mentioned on top of envelope.
ii. Envelope 2 : “ Financial Bid of the tender for Supply of
Machinery/ Tools/Equipments meant for the trade of Sewing
Technology, Mechanic Motor Vehicle and Stenography and
Secretarial Practice” PART – II ( PRICE BID ). Note: The Mobile
No’s, Email ID and name of the person to whom contact
should be clearly mentioned on top of envelope.
PART - I (TECHNICAL BID / Pre-Qualification Bid ) : This part of the tender
should include & contain following documents :
i. Earnest Money in the shape CDR / FDR amounting to 2% of the
Total Estimated Cost of the package. Minimum earnest for each
package is shown with each package.
ii. Cost of tender document Rs. 500/- (non refundable) if downloaded
from the website or received through email.
( SEAL & SIGNATURE )
of Tenderer / Bidder Page 1 of 10
I +------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------1 I I I I ---------------------------------------------------------------------
• '
]_______________________________________________________________________________________________ _ J
r------------------------------------------------------------------- Government of Jammu & Kashmir
Institute Management Committee
Industrial Training Institute ( Kupwara )
Technical Education Department
Phone : 01955252052 Email : [email protected]
No. ITI/Kup/Estt/15/ Date : 03 / 12/ 2015
iii. Orders of similar nature executed / details of Past Experience in
similar field.
iv. Technical details, Technical specifications, drawings, Catalogues,
Visuals, Pamphlets and Relevant literature.
v. Self Attested Photocopy of TIN, Sales Tax Registration and Other
Registration Certificate.
vi. Self Attested Photocopy of PAN.
vii. The period of Guarantee FOR ITI Kupwara with installation should
be clearly mentioned, including other guaranteed technical
particulars.
viii. Terms and conditions (contract) of this tender document (NIT No.
01 dated: 03.12.2015) duly signed and stamped on each page by
the tenderer / bidder or his representative.
EXCLUDING ANY PRICE DETAILS THEREOF (which should be kept
in price bid)
ix. Photocopy of GR against which tender document is received.
x. Copies of Self Attested Copy of IT Returns, Balance Sheet, Profit &
Loss Statement, Trading Account, Challan.
xi. Authorised Dealership / Manufacturer certificate / Authorised
Representative Certificate.
xii. Rs. 10/- Revenue stamp affixed.
xiii. Complete details of the Bidder / Tenderer / Person along with
email ID and Contact No.’s should clearly be mentioned on
the cover of the envelopes of Prequalification Bid & Price Bid.
( SEAL & SIGNATURE )
of Tenderer / Bidder Page 2 of 10
I +------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------1 I I I I
• '
]_______________________________________________________________________________________________ _ J
r------------------------------------------------------------------- Government of Jammu & Kashmir
Institute Management Committee
Industrial Training Institute ( Kupwara )
Technical Education Department
Phone : 01955252052 Email : [email protected]
No. ITI/Kup/Estt/15/ Date : 03 / 12/ 2015
xiv. Legal and any other conditions / informations.
PART - II ( FINANCIAL / PRICE BID ) : This part should contain only the
prices and will open for those tenders who will qualify the pre-qualification bid.
i. It will contain the Price Bid on the prescribed format of the Tender
Document. The Rates quoted should be inclusive of all charges like
Taxes ( VAT, Entry Tax, Excise Duty, Other taxes, Octrio, Service
Tax, etc ) and other charges such as installation charges, freight,
levies, Insurance, Service Charges, etc.
2. Financial bid of those Bidders / Tenderers shall be opened and considered for
evaluation who have qualified in pre-qualification / technical bid after opening
envelop 1st.
3. The Rates should be FIRM and quoted FOR ITI Kupwara.
4. The Quantity / Requirement mentioned in the tender document (Annexure’s
A) is tentative and may vary (increase or decrease) at a time of procurement,
depending upon the funds available and the discretion of IMC. The bidder
won’t have any claim whatsoever in case the quantity is changed.
5. The earnest money amounting to 2% of Estimated Cost in the shape of Call
Deposit Receipt / Fixed Deposit Receipt should be made from nationalized /
scheduled bank pledged to the Member Secretary IMC OF ITI Kupwara, which
will be returned back to the un-successful tenderers immediately after issuing
( SEAL & SIGNATURE )
of Tenderer / Bidder Page 3 of 10
I +------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------1 I I I I
• '
]_______________________________________________________________________________________________ _ J
r------------------------------------------------------------------- Government of Jammu & Kashmir
Institute Management Committee
Industrial Training Institute ( Kupwara )
Technical Education Department
Phone : 01955252052 Email : [email protected]
No. ITI/Kup/Estt/15/ Date : 03 / 12 / 2015
order to successfully bidder. No Cheque / DD will be accepted in lieu of CDR /
FDR. The prequalification bid without earnest money will be rejected out-
rightly.
6. The Bidder / tenderer can quote rate for any or all the Items.
7. The IMC OF ITI KUPWARA reserves the right to accept or reject any
offer/quotation/tender or part thereof without assigning any reason / reasons
thereof.
8. The specification / configuration mentioned in the tender document is the
minimum requirement. The higher configuration at higher cost won’t have
the claim for tender.
9. Payment shall be released to the supplier after the Quality and Specification of
the material is certified by the IMC or Committee / Agency / Person authorised
by IMC. In that case 90% of the payment shall be released after complete
supply is received and remaining 10% shall be released after 12 months or
after completion of warranty period, whichever is later.
10. In case the supplier fails to supply / deliver his assignment properly or in
full. Penalty @ 2.00% (Two Percent) of the total cost of the order shall be
imposed upon him/them for delay of every 07 days, to the maximum of 10%
of total cost of the order. The penalty if imposed shall be recovered from the
( SEAL & SIGNATURE )
of Tenderer / Bidder Page 4 of 10
I +------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------1 I I I I
• '
]_______________________________________________________________________________________________ _ J
r------------------------------------------------------------------- Government of Jammu & Kashmir
Institute Management Committee
Industrial Training Institute ( Kupwara )
Technical Education Department
Phone : 01955252052 Email : [email protected]
No. ITI/Kup/Estt/15/ Date : 03 / 12 / 2015
security deposit / Bank Guarantee / other payables at the discretion of the
IMC.
11. In case of failure of the supplier to make supply in part or in full the act
shall amount to breach of contract. A registered notice or notice sent through a
special messenger to the supplier for breach of contract shall be sufficient for
the IMC to wind up or cancel his contract. In case supplier avoids receiving the
notice or deliberately gives wrong address for communication where it
becomes practically difficult to deliver the notice, the same shall be pasted on
the Main Notice Board at ITI Kupwara and the notice shall be treated as
service notice to the supplier. His earnest money will be forfeited. The IMC will
be at liberty to get the leftover supply completed at his risk and cost. Any
additional amount involved for such supply may be recovered from other
claims / resources of the supplier.
12. The rates quoted should be written clearly in Words and in figures,
without any cuttings/Erasing /overwriting and corrections. If any correction
made it shall be by scoring out the cancelled portion, writing the corrected rate
and duly initialling by the person signing the bid. Any ambiguity in the rate or
amount will be taken in favour of IMC and supplier won’t have any say.
The quoted rates should be properly taped by transparent tape.
13. Misconduct or Misbehaviour if any observed from supplier during the tender
opening process or during the supply, with any officer / official shall be
( SEAL & SIGNATURE )
of Tenderer / Bidder Page 5 of 10
I +------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------1 I I I I
• '
]_______________________________________________________________________________________________ _ J
r------------------------------------------------------------------- Government of Jammu & Kashmir
Institute Management Committee
Industrial Training Institute ( Kupwara )
Technical Education Department
Phone : 01955252052 Email : [email protected]
No. ITI/Kup/Estt/15/ Date : 03 / 12 / 2015
dealt strongly and may result in recommendation for cancellation of
registration of card issued by any department to him.
14. The bidder should mention the mobile numbers, Email ID,
correspondence address and persons to whom communication could be made.
15. The successful Bidder / Tenderer shall have to execute an agreement
with the IMC OF ITI KUPWARA within 7 days after issuance of order. Failure to
execute such agreement shall not prevent to the terms and conditions
embodied herein and any loss sustained by the IMC in re-tendering shall be
recovered from him besides forfeiture of the CDR / FDR and security deposit.
16. Time shall be essence to the contract. In the event of successful
tenderers failing, declining or delaying the execution of the agreement, the
IMC shall, without prejudice to any other remedy available to it under any law,
for the time being in force in the state, be entitled to forfeit the earnest money
in full or in part and impose such penalty as may be determined by the IMC.
17. Correction slips found in the tender box regarding enhancing / lowering
rates for any information connected with the bid shall not be entertained.
18. In case of any doubt, dispute, difference, questions arising between
tenderer and IMC regarding incorporation / interpreting of any of the terms
and conditions of the NIT on any matter connected or incidentals here to or
( SEAL & SIGNATURE )
of Tenderer / Bidder Page 6 of 10
I +------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------1 I I I I
• '
]_______________________________________________________________________________________________ _ J
r------------------------------------------------------------------- Government of Jammu & Kashmir
Institute Management Committee
Industrial Training Institute ( Kupwara )
Technical Education Department
Phone : 01955252052 Email : [email protected]
No. ITI/Kup/Estt/15/ Date : 03 / 12 / 2015
the respective right and responsibility of the parties, the same shall be referred
to the Director Technical Education and decision thereon of the Arbitrator in
the matter shall be final, conclusive and binding upon the parties. During
arbitration case supplier will not stop the supply till decision of the Arbitration.
19. Any other item / equipment found necessary but not mentioned in the
tender document shall be paid as per LMR ( Lowest Market Rates ) the cost of
which shall be certified by the IMC / Any committee or person authorised by
IMC.
20. If felt by IMC, reasonability of the quoted rates by tenderer/bidder, shall
first be certified by IMC / Works & Procurement Committee before placing
order.
21. The bids / Tenders should be deposited in the office of Member Secretary
IMC / Superintendent ITI Kupwara, directly or sent through Registered Post on
the address :
Superintendent ( Member Secretary IMC OF ITI KUPWARA )
Industrial Training Institute, Kupwara,
Galizoo – Kupwara ,
District : Kupwara, Kashmir,
J&K, Pin Code : 193222.
Phone No. : 01955 – 252052
(SEAL & SIGNATURE ) of Tenderer / Bidder
Page 7 of 10
I +------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------1 I I I I
• '
]_______________________________________________________________________________________________ _ J
r------------------------------------------------------------------- Government of Jammu & Kashmir
Institute Management Committee
Industrial Training Institute ( Kupwara )
Technical Education Department
Phone : 01955252052 Email : [email protected]
No. ITI/Kup/Estt/15/ Date : 03 / 12 / 2015
22. The Tender should reach the office of IMC OF ITI KUPWARA on or before
28th December 2015, upto 2:00 PM. The date of opening of pre qualification
bid as well as the financial bid shall be opened on 29th December 2015 at 11:30 am in presence of the bidders/tenderers who wish to be
present.
23. No conditional tender will be accepted.
24. Bidder should clearly mention the period of Guarantee FOR ITI Kupwara
with installation.
25. The successful bidder / Tenderer shall have to provide training to the
identified officials of the Department to operate the Equipment’s at place of
installation ITI Kupwara, if needed.
26. Samples will be sought if and where felt necessary, and the same should
be kept in readiness so that same can be provided when asked, within a period
of 7 days. The samples ( if sought ) will remain in the custody of the
Department at any place as per their convenience till the supplies are
completed in full and verified at the level of the IMC.
27. The inspection / verification of the equipment’s will be carried out at ITI
Kupwara. ( SEAL & SIGNATURE )
of Tenderer / Bidder Page 8 of 10
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------1 L J I I
• '
]_______________________________________________________________________________________________ _ J
r------------------------------------------------------------------- Government of Jammu & Kashmir
Institute Management Committee
Industrial Training Institute ( Kupwara )
Technical Education Department
Phone : 01955252052 Email : [email protected]
No. ITI/Kup/Estt/15/ Date : 03 / 12 / 2015
28. For any dispute arising out of this contract, the courts of Jammu &
Kashmir at Srinagar only shall have jurisdiction.
29. In case of specifications, make and quality, the IMC shall have the right
to take decision at the time of finalization of rates.
30. The rates shall remain valid for one year from the date of opening of
tender.
31. Bidder/ Tenderer should mention clearly the maximum possible warranty
period of the tendered item & shall provide free after sale service during the
warranty period. In case the bidder is not a manufacturer himself, he has to
produce necessary guarantee / warranty certificate of Principal manufacturer
for the ordered quality & quantity.
32. Bid/offer of any Sub-standard item will be treated as rejection of the
tender.
33. At the time of procurement, if DGS&D rates are available for any of the
item the IMC reserves the exclusive right to procure the same on the rate
contract & exclude the item from the tender. In that case no tenderer will have
any claim whatsoever over the said item(s).
( SEAL & SIGNATURE )
of Tenderer / Bidder Page 9 of 10
I +------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------1 I I I I
• '
]_______________________________________________________________________________________________ _ J
r------------------------------------------------------------------- Government of Jammu & Kashmir
Institute Management Committee
Industrial Training Institute ( Kupwara )
Technical Education Department
Phone : 01955252052 Email : [email protected]
No. ITI/Kup/Estt/15/ Date : 03 / 12 / 2015
34. The Tender must be completed in all respects. All the terms and
conditions of tender including Technical Specifications should be carefully
studied for the sake of complete and comprehensive offer.
35. All other terms and conditions not covered but in vogue in the State
PWD shall hold good and form a part of the NIT.
Sd/- ( Member Secretary / Superintendent )
Institute Management Committee Industrial Training Institute
Kupwara
Office Use :
Received Rs. 500/- as cost of the Tender Document NIT No. : 01, Dated:03 .12.2015
for “Supply of Machinery/ Tools/Equipments meant for the trades of Sewing
Technology, Mechanic Motor Vehicle and ,Stenography and Secretarial Assistant at
ITI Kupwara under VTIP mode” from M/s …......………………..................……………,
Address : ………………….……………................................................…….., vide this office
G. R No…………..………. Dated: ………………….
Signature of accepting official
Acceptance by Tenderer / Bidder :
I / We have studied the Tender Document as a whole and
agree to abide by the terms and conditions of NIT No. 01
Dated : 03.12.2015 from S. No. 01 to 35. I / We have sealed
all the pages as token of acceptance. (SEAL & SIGNATURE )
of Tenderer / Bidder Page 10 of 10
VTIP Package 1 ( Equipments-for Sewing Technology Trade) (Minimum Earnest money for package 1 is Rs. 7500/-)
S. No Name of the Item with specification Quality/brand Rate Per Unit in Figures
Rate Per Unit in Words
VAT in Rs Other Taxes in
Rs Total in Rs
1 Double Needle Machine (Brother/JUKI/Singer/Bernia)
2 Button Hole Machine (Brother/JUKI/Singer/Bernia)
3 Bar Tack Machine (Brother/JUKI/Singer/Bernia)
VTIP Package 2: Tools (for MMV Trade) (Minimum Earnest money for package 2 is Rs. 1000/-)
S. No Name of the Item with specification Quality/Brand Rate Per
Unit in Figures
Rate Per Unit in Words VAT in Rs Other Taxes in
Rs Total in Rs
1. Allen Key set of 12 pieces (2mm to
14mm) Taparia/Jhalani
2 Callipers outside 15 cm spring
3 Hammer ball peen 0.5 kg with handle
(Taparia/Jhalani)
4 Hands file 20 cm. Second cut flat JK
5 Pliers combination 20 cm.
(Taparia/Jhalani/PYE)
6 Screw driver 20cm.X 9mm. Blade
(Taparia/Jhalani/PYE)
7 Screw driver 30 cm. X 9 mm. Blade
(Taparia/Jhalani/PYE)
8 Spanner D.E. set of 12 pieces (6mm
to 32mm) Taparia/Jhalani/PYE)
9 Spanner, ring set of 12 metric sizes 6
to 32 mm. Taparia/Jhalani/PYE)
10
Spanners socket with speed handle,
T-bar, ratchet and universal upto 32
mm set of 28 pieces with box
Taparia/Jhalani/PYE)
11
Steel tool box with lock and key
(folding type) 400x200x150 mm
made of 22 gauge sheet
(Inder/Stanley/Everest)
12 Wire cutter and stripper
(Taparia/Jhalani/PYE)
VTIP Package 3: Tools, Instruments and General Shop outfits (for MMV Trade) (Minimum Earnest money for package 3 is Rs. 10000/-)
S. No Name of the Item with specification Quality/Brand Rate Per
Unit in Figures
Rate Per Unit in Words VAT in Rs Other Taxes in
Rs Total in Rs
1 Adjustable spanner (pipe wrench 350
mm) (Taparia/Jhalani/PYE)
2 Air impact wrench with standard
accessories
3 Air ratchet with standard accessories
4 Allen Key set of 12 pieces (2mm to
14mm) (Taparia/Jhalani/PYE)
5 Ammeter 300A/ 60A DC with
external shunt table type
6 Angle plate adjustable 250x150x175
7 Angle plate size 200x100x200mm
8 Anvil 50 Kgs with Stand
9 Auto Electrical test bench
10 Blow Lamp 1 litre Heavy duty
11 Caliper inside 15 cm Spring
12 Calipers outside 15 cm spring
13 Carburetor – Solex for Maruti Suzuki
800
14 Carburetor Mikuny
15
Chain Pulley Block-3 ton capacity
with tripod stand made of thick 4"
Schannel steel
16 Chisel 10 cm flat
(Taparia/Jhalani/PYE)
17 Chisels cross cut 200 mm X 6mm
(Taparia/Jhalani/PYE)
18 Circlip pliers Expanding type 15cm
(Taparia/Jhalani/PYE)
19 Circlip pliers contracting type 15cm
(Taparia/Jhalani/PYE)
20 Circlip pliers Expanding type 20cm
21 Circlip pliers contracting type 20cm
(Taparia/Jhalani/PYE)
22 Clamps C 100mm
23 Clamps C 150mm
24 Clamps C 200mm
25 Cleaning tray 45x30 x8cm made of
22 gauge galvanised steel sheet
26 Coil spring compressor for
suspension spring
27 Copper bit soldering iron 0.25 Kg
28 Cut section models of shock
absorbers
29 Cut section of cross ply and radial
tyres
30 Cut section working model of
automatic transmission Gear box
31 Cylinder bore gauge capacity 20 to
160 mm (Mitutoyo)
32 Cylinder liner Wet type
(USHA/Mahal Make)
33 Cylinder liner- Dry liner, press fit &
slide fit liner (USHA/Mahal Make)
34 DC Ohmmeter 0 to 300 Ohms, mid
scales at 20 Ohms Table type
35 Different type of piston model (set of
Six)
36 Disc brake with caliper assembly
37 Distributor –Duel reluctance type
38 Dividers 15 cm Spring
39 Drift Punch Copper 15 Cm
40 Drill point angle gauge
41 Drill twist 1.5 mm to 15 mm (various
sizes) by 0.5 mm (Bosch)
42 Electric Soldering Iron 230 V 60
watts (Tony/Duke)
43 Electric Soldering Iron 230 V 25
watts (Tony/Duke)
44 Engineers stethoscope
45 Executive Auto Electrical tool kit
46 Feeler gauge 20 blades (metric)
47 File flat 20 cm bastard (JK)
48 File, half round 20 cm second cut
(JK)
49 File, Square 20 cm second cut (JK)
50 File, Square 30 cm round (JK)
51 File, triangular 15 cm second cut (JK)
52 Files assorted sizes and types
including safe edge file (20 Nos) (JK)
53 Flat File 25 cm second cut (JK)
54 Flat File 35 cm bastard (JK)
55 Garage stand Tripod adjustable
56 Glow plug tester
57 Granite surface plate 1600 mmx
1000mm x 250 with heavy duty stand
and cover
58 Grease Gun ELGI
59 Grease Gun heavy duty trolley type
10 kg capciaty ELGI
60 Hacksaw frame 30 cm heavy duty
(Inder/Everest)
61 Hammer Ball Peen 0.75 Kg
(Taparia/Jhalani/Amber)
62 Hammer Chipping 0.25 Kg
(Taparia/Jhalani/Amber)
63 Hammer copper 1 Kg with handle
64 Hammer Mallet
65 Hammer Plastic
66
Hand operated crimping tool (i) for
crimping up to 4mm and (ii) for
crimping up to 10mm (Set)
67
Hand reamers adjustable 10.5 to
11.25 mm, 11.25 to 12.75 mm, 12.75
to 14.25 mm and 14.25 to 15.75 mm
(set)
68 Hand Shear Universal 250mm
69 Hand vice – 37 mm
70 Hollow Punch set of seven pieces
6mm to 15mm (set)
71 Horn and Horn relay (TVS/MINDA)
72 Impact screw driver (Bosch)
73 Injector – Multi hole type
(MICO/Bosch)
74 Injector - Pintle type (MICO/Bosch)
75 Injector cleaning unit (MICO/Bosch)
76 Injector testing set (Hand tester)
(MICO/Bosch)
77 Insulated Screw driver 20 cm x 9mm
blade (Taparia/Jhalani/Amber)
78 Insulated Screw driver 30 cm x 9mm
blade (Taparia/Jhalani/Amber)
79 Left cut snips 250mm
80 Lifting jack screw type 3 ton capacity
(Hi-lift/Pro-lift/Torin/Powerzone)
81 Lifting jack screw type 5ton capacity
(Hi-lift/Pro-lift/Torin/Powerzone)
82
Lifting jack screw type 20 Ton
capacity (Hi-lift/Pro-
lift/Torin/Powerzone)
83 Magnifying glass 75mm
84 Marking out table 90X60X90 cm.
(adjustable stand)
85 Oil can 0.25 liter capacity
86 Oil pump for dismantling and
assembling.
87 Oil Stone 15 cm x 5 cm x 2.5 cm
88 Oscilloscope 20MHz
89 Philips Screw Driver set of 5 pieces
(100 mm to 300 mm)
90 Piston Ring expander and remover.
91 Piston Ring groove cleaner.
92 Pliers combination 20 cm.
(Taparia/Jhalani/PYE)
93 Pliers flat nose 15 cm
(Taparia/Jhalani/PYE)
94 Pliers side cutting 15 cm
(Taparia/Jhalani/PYE)
95 Portable electric drill Machine
(Bosch/Black& Decker)
95 Prick Punch 15 cm (taparia/Jhalani)
97 Punch Letter 4mm (Number) set
(Taparia/Jhalani)
98 Radiator cut section-cross flow
99 Radiator cut section-down flow
100 Radiator pressure cap
101 Right cut snips 250mm
102 Rivet sets snap and Dolly combined
3mm, 4mm, 6mm (set)
103 Scraper flat 25 cm
104 Scraper half round 25 cm
105 Scraper Triangular 25 cm
106 Scriber 15 cm
107 Scriber with scribing black universal
108 Set of stock and dies – Metric (set)
109 Shear Tin Man’s 450 mm x 600mm
110 Sheet Metal Gauge
111 Sher Tinmans 300mm
112 Soldering Copper Hatchet type
500gms
113 Solid Parallels in pairs (Different
size) in Metric (set)
114 Spanner Clyburn 15 cm
115 Spanner D.E. set of 12 pieces (6mm
to 32mm) (Taparia/Jhalani/Amber)
116 Spanner T. flocks for screwing up
and up-screwing inaccessible position
117 Spanner, ring set of 12 metric sizes 6
to 32 mm. (Taparia/Jhalani/Amber)
118
Spanners socket set with speed
handle, T-bar, ratchet and universal
complete set in box (6-32)
119 Spark lighter
120 Spark plug spanner 14mm x 18mm
121 Steel rule 15 cm inch and metric
122 Steel rule 30 cm inch and metric
123 Straight edge gauge 2 ft.
124 Straight edge gauge 4 ft.
125 Stud remover with socket handle
126 Surface gauge with dial test indicator
plunger type i.e. 0.01 mm
127 Tachometer (Counting type)
128 Tandem master cylinder with booster
129 Taps and Dies complete sets BSF
(Inder)
130 Taps and wrenches – metric (Inder)
131 Temperature gauge with sensor 0-100
deg c
132 Thermostat Valve
133 Thread pitch gauge metric, BSW
134 Torque wrenches 5-35 Nm (Trip
Torque)
135 Torque wrenches 12-68 Nm (Trip
Torque)
136 Torque wrenches 50-225 Nm (Trip
Torqiue)
137 Trammel 30 cm
138 Tread wear indicator
139 Tyre & split rim wheel assembly
140 Tyre pressure gauge with holding
nipple
141 Universal puller for removing
pulleys, bearings
142 V’ Block 75 x 38 mm pair with
Clamps
143 Vacuum gauge to read 0 to 760 mm
of Hg.
144 Valve Lifter
145 Vice grip pliers
(Taparia/Jhalani/PYE/)
146 Wheel cylinder
147 Wiper motor assembly (TVS)
148 Wire Gauge (metric)
149 Bench vice with 12 cm jaw
(Inder/Everest/ARO)
150 Working Model of power windows
151 Working model of torque converter
152 4 Point relays (for vehicle)
153 5 Point relays ) (for vehicle)
154 Bench vice with 6" jaw
(Everest/Inder/ARO)
155 Bench vice with 4" jaw
(Inder/Everest/ARO)
VTIP Package 4: General Machinery(for MMV Trade) (Minimum Earnest money for package 4 is Rs. 7500/-)
S. No Name of the Item with specification
Quality/Brand Rate Per Unit in
Figures Rate Per Unit
in Words VAT in Rs
Other Taxes in Rs
Total in Rs
1 Air Brake Assembly
2 Car Jet washer with standard
accessories
3 Cut section Model of Mock layout of
a motor car –electrical system
working model
4 Demonstration board of 2W Ignition
system, ignition coil
5 Demonstration board of electronic
Ignition system, ignition coil
6 Demonstration board of MPFI
system
7 Drum brake assembly
8 Multi-point fuel injection pump
9 Starter motor pre-engagement type
10 Starter motor Co-axial type
11 Steering assembly - Rack & pinion
working on stand
12 Steering assembly - Worm & roller
working on stand
Steering assembly - Recirculating
ball working on stand
13 Steering assembly - Power steering
working on stand
14
Vacuum assisted hydraulics brake
assembly with vacuum booster
working model of vehicle fitted
heavy duty stand
15 Water pump (of vehicle) for
dismantling and assembling
16 Work bench 250 x 120 x 60 cm
made of 75x6mm angle iron with 2"
Deodar wood top
17 Fuel injection pump dismantling tool
kit /Universal Vice (MICO/Bosch)
18 Fuel injection pump Distributor/
rotary pump along with special tools
and accessories.
19 Semi-floating axle assembly on
stand
20 Full floating axle assembly on stand
21 Functional/experiment model of
different type of sensors (set)
22 Fuel feed pump for diesel (MICO)
VTIP Package 5 (Machinery/Equipment for MMV Trade) (Minimum Earnest money for package 5 is Rs. 7500/-)
S. No Name of the Item with specification
Quality/Brand
Rate Per Unit in Figures
Rate Per Unit in Words VAT in Rs Other Taxes in
Rs Total in Rs
1. Air bag simulator
2 Air conditioning trainer kit
3 Arbor press hand operated 2 ton
capacity
4 Bench lever shears 250mm Blade x
3mm Capacity
5 Dual Magnetization Yoke : AC /
HWDC, 230 VAC, 50Hz
6 Gas Welding Table 1220mm
x760mm
7 Hand operated Hydraulic press
8 Hydraulic jack HI-LIFT type -3 ton
capacity trolley type
9 Hydraulic jack HI-LIFT type - 5 Ton
capacity trolley type
10 Liquid penetrant Inspection kit
11 Pipe Bending Machine (Hydraulic
type) 12mm to 30mm (Inder)
12 Pneumatic rivet gun with standard
accessories (Taiwan/U-Star)
13 Tin smiths bench folder 600 x 1.6mm
14 Transfer case with stand for
Dismantling and assembly.
15
Trolley type portable air compressor
single cylinder with 45 liters capacity
Air tank, along with accessories &
with working pressure 6.5 kg/sq cm
16 Welding plant Oxy-Acetylene
complete ( high pressure) complete
with all accessories
VTIP PACKAGE 6 (Equipments for MMV Trade) (Minimum Earnest money for package 6 is Rs. 8000/-)
S. No Name of the Item with specification Quality/Brand Rate Per
Unit in Figures
Rate Per Unit in Words VAT in Rs Other Taxes in
Rs Total in Rs
1
Automotive exhaust 5 gas analyzer
(petrol & Diesel) or Diesel Smoke
Meter with printer and PC of latest
configuration.
2 Discrete Component Trainer / Basic
Electronics Trainer
3 Multi Scan Tool with oscilloscope
VTIP PACKAGE 7 (Equipments for MMV Trade) (Minimum Earnest money for package 6 is Rs. 12000/-)
S. No Name of the Item with specification Rate Per Unit
in Figures Rate Per Unit in Words VAT in Rs
Other Taxes in Rs
Total in Rs
01
Vision Based 3D Wheel aligner suitable for simultaneous four wheel alignment with calibration free pit level , lift scissor, pit level compensation softwares supplied with standard accessories. (Manatec Fox 3D vision based)
02 Computerised Wheel Balancer (Manatec WB-VL-65 Premium)
VTIP Package : 8 (Raw material Consumables for MMV Trade) (Minimum Earnest money for package 8 is Rs. 500/-)
S. No Name of the Item with specification Quality/Brand Rate Per
Unit in Figures
Rate Per Unit in Words VAT in Rs Other Taxes in
Rs Total in Rs
01 Chalk, Prussian blue.
02 Emery paper - 36–60 (cloth)
03 Emery paper - 80–120 (cloth)
04 Leather welding gloves pair
05 Hacksaw blade Double ended
06 Hand rubber gloves (pair) tested for
5000 V
07 Different type of oil seal
08 Leather Apron
09 Different type gasket material sheets
10 Hydrometer for Battries
11 Steel wire brush
VTIP Package 9: (IT Items for MMV Trade) (Minimum Earnest money for package 9 is Rs. 2000/-)
S. No Name of the Item with specification Quality/Brand Rate Per
Unit in Figures
Rate Per Unit in Words VAT in Rs Other Taxes in
Rs Total in Rs
01 LCD projector.
02 LED TV 42”
03 Multimedia DVD for Automotive
application/subjects
04 HP MFD Laserjet M126nw Print/Scan Copy wireless
05
Online UPS 2 KVA, Indicative back up time
120 minutes with isolation transformer
suitable for single phase AC input & single
phase AC output (Microteck / Luminus /
APC)
VTIP Package 10: Electronic/IT Equipments for Softwares Stenography and Secretarial Assistant Trade Trade) (Minimum Earnest money for package 10 is Rs. 2000/-)
S. No Name of the Item with specification Quality/Brand Rate Per Unit in Figures
Rate Per Unit in Words VAT in Rs Other Taxes
in Rs
Total in Rs
1 Fax Machine (Latest Model)
2 Interactive board
3 HP Cartridge CC628AA (27+28 Combo)
4
Online UPS 5 KVA, Indicative back up
time 120 minutes with isolation
transformer suitable for single phase AC
input & single phase AC output
(Microteck / Luminus / APC)
VTIP Package 11: (Softwares Stenography and Secretarial Assistant Trade) (Minimum Earnest money for package 11 is Rs. 2500/-)
S. No Name of the Item with specification Quality/Brand Rate Per Unit in Figures
Rate Per Unit in Words VAT in Rs
Other Taxes in Rs
Total in Rs
1 Application Software (MS- Office) Educational Version..10 user
2 Antivirus (Latest Version)… 10 user
Package 12: (M I S-Office) (Minimum Earnest for package112 is Rs.500)
S. No Name of the Item with specification Quality/Brand Rate Per Unit in Figures
Rate Per Unit in Words VAT in Rs
Other Taxes in Rs
Total in Rs
1 Online UPS 2 KVA, Line interactive, 50-60 minutes backup on computer load. (Microteck / Luminus / APC)