Not All Paints Are Created Equal...ASTM D2370 Tensile Strength Not Listed Not Listed 340 psi ASTM...

Not All Paints Are Created Equal

Do you still get what you asked for?

CONSOLIDATION & COMMODITIES

PCI Coatings Magazine – Race to the Top

ARCHITECTURAL PAINTS

Commercial Coating National Brand 1 National Brand 2Ext Flat Ext Flat Ext Flat

Finish Flat Flat FlatVehicle 100% Acrylic 100% Acrylic 100% Acrylic

Fill Level 5 gallons 5 gallons 5 gallonsVolume Solids 46% 43% 46%lbs/gal 11.2 11.4 12.5Coverage sqft/gal 140 250 - 300 250 - 300WFT per Coat mils 12 5.3 - 6.4 4.6 - 6.4DFT per Coat mils 5 2.2 - 2.6 2.1 - 2.9System 2 coats 2 coats 2 coatsVOC

MARKET SEGMENTATION

FMI, Oxford EconomicsUS Census BureauJLL Research

MARKET SEGMENTATION

Interior Paints, 57%

Exterior Paints, 31%

Stains, 7%

Lacquer, 1%Clears, 2%

Others, 2%

Estimated Architectural Coatings by End UseBy Value

ACA Market Analysis: 2010-2015

US Census BureauNational Renewable Energy LaboratoryNational Oceanic & Atmospheric AdministrationNational Atmospheric Deposition Program

POPULATION DENSITY


CHLORIDE ION DEPOSITION


ONSHORE & SURFACE WINDS


RAINFALL


POPULATION DENSITY

Above GradeConcrete Waterproofing* Solutions

Points to Consider

NEED FOR MASONRY COATINGS

CONCRETE & MASONRY COATINGS

Coatings Testing• ASTM D2370 – 16

Standard Test Method for Tensile Properties of Organic Coatings• ASTM D638 – 14

Standard Test Method for Tensile Properties of Plastics• ASTM D412 – 16

Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers

Coatings Testing• ASTM D4541

Pull Off Strength of Coatings (metallic substrates)• ASTM D7234

Pull Off Adhesion Strength of Coatings on Concrete

Coatings Testing• ASTM G23

Carbon Arc Exposure With and Without Water Exposure (withdrawn 2000)• ASTM G26

Xenon Arc Exposure With and Without Water Exposure (withdrawn 2000)• ASTM G155

Xenon Arc Exposure for Exposure of Non Metallic Materials• ASTM D4587

Fluorescent UV Condensation Exposure of Paint and Coatings• ASTM D6695

Xenon Arc Exposures of Paint and Related Coatings

INDUSTRY STANDARDS

Slide Number 1Slide Number 2Slide Number 3Slide Number 4Slide Number 5Slide Number 6Slide Number 7Slide Number 8Slide Number 9Slide Number 10Slide Number 11Slide Number 12Slide Number 13Slide Number 14Slide Number 15Slide Number 16Slide Number 17Slide Number 18Slide Number 19Slide Number 20Slide Number 21Slide Number 22Slide Number 23Slide Number 24Slide Number 25Slide Number 26Slide Number 27Slide Number 28Slide Number 29Slide Number 30Slide Number 31Slide Number 32Slide Number 33

Not All Paints Are Created Equal...ASTM D2370 Tensile Strength Not Listed Not Listed 340 psi ASTM...

Documents

Transcript of Not All Paints Are Created Equal...ASTM D2370 Tensile Strength Not Listed Not Listed 340 psi ASTM...