Noris Medical Catalog V3

1

ww

w.n

oris

me

dic

al.c

om

20

12

/3

Product Catalog 2012/3

S t a t e o f t h e A r t D e n t a l P r o d u c t s

2

20

12

/3

ww

w.n

ori

sm

ed

ica

l.c

om

Noris Medical was founded by a group of doctors and engineers with up to 40 years of experience in design and advanced machining of parts for the Medical field. Noris Medical culminates this collective knowledge, innovative approach and never ending quest for perfection, and adds on staff dentists and doctors to provide in house development and professional product feedback. Noris Medical focuses on dental applications and the development of new products to assist dentistry and significantly improve the lives of customers globally. Noris Medical strives to bring you advanced yet affordable solutions from a company your business can depend on.

Engineering As a primarily engineering company Noris Medical teamed up with its associate dentists and dental technicians to not only examine the needs of today’s dental practice but also to invent and innovate new products to support and enhance dentists and dental technician in their fine profession. Great care is taken in the selection of materials, production

methods, sterilization and packaging of all dental implants and associated components. Noris Medical established computerized CAD/CAM design and manufacturing processes

optimized for particular types of materials for the dental field, such as Titanium and Zirconia, and for advanced prostheses solutions. Using state of the art machinery

and unique processes Noris Medical dental products assures patients a lifetime of accurate fitting.

Regulatory ComplianceStrict inspection procedures are applied to ensure all dental implant products are in compliance with an array of regulatory standards. Noris Medical has

made a large investment towards a high tech environment for designing and manufacturing dental products. All the dental products are manufactured under a certified ISO 9001:2008 and the ISO 13485:2003 quality system. In

addition, all products meet stringent European Medical Device Directive and thus carry the CE mark. All facilities, as well as design and production processes, are

routinely audited by local and international inspectors. The entire manufacturing process is monitored and recorded for complete process traceability. In house

standard Cleanroom is used for the packaging process of all implants, followed by Gamma ray radiation for the final sterilization. Noris Medical meets or exceeds the

medical requirements for implant production and continuously maintains and monitors the top quality of its products. This demonstrates Noris Medical’s commitment to quality

and patient safety.

ABOUT US Noris Medical

3

ww

w.n

oris

me

dic

al.c

om

20

12

/3

Implant Surface Treatment It is well known that titanium alloy has excellent mechanical properties and superior biocompatibility, Noris Medical implants are made of TiAl6V4 ELI titanium alloy.

Macroscopic and especially microscopic properties of implant surfaces play a major role in the osseous healing of dental implants. To induce the desired biological response, Noris medical is using the SLA (Sand blasted, Large grit, Acid etched) technique. The SLA technique is produced by a large grit sand-blasting process that leads to a macroroughness on the titanium surface. This is followed by a strong acid-etching process. This produces the micropits superimposed on the rough-blasted surface, as seen in the scanning electron microscope (SEM). When surface modifications affecting the macro and micro scale topography are used changes on the sub-micro topography are often induced. It has been found that roughened implant surfaces give increased retention strength and that topographic down to the nanometer range affect the attachment and growth of bone cells.

Surface examination by means of SEM / EDS analysis:

The analysis was executed using the facilities of the Material Engineering Faculty of the Israel Technion Institute: FEI Quanta scanning electron microscope (SEM) and Inca X-ray analyzer attached to the electron microscope. The analysis included: Inspection of the surface in back scattering electrons, which due to good elemental contrast, enables detection of the impurities on the surface of the implants, EDS analysis of the typical impurity particles.

Implant surface at high magnification.No visible abnormal impurities.

Implant surface at low magnification.No visible abnormal impurities.

2mm 30µm

4

20

12

/1

ww

w.n

ori

sm

ed

ica

l.c

om

All rights reserved to Noris Medical LTD. Unautorized copying of any of this catalog's material is strictly prohibited.

Sterilized by Irradiation

Noris Medical - Implant Inner Label Description

Noris Medical - Product Label Description

Do Not Re-Use

Non Sterile Product

Caution: U.S. Federal Law Restricts This Device To Sale By Or On The Order Of A Licensed Dentist

Catalog Number and Barcode

Batch Code

Product Description

Product Description

Regulatory Compliance

Manufacturer

Catalog Number and Barcode

Do Not Re-UseUse By Date

Consult On-Line Documents

Web Address

Batch CodeConsult On-Line Documents

Caution on Use of Package Content If Package Is Opened Or Damaged

PACKAGING & LABELING SYSTEM

Implant Holder

Implant

Implant Protective Cover

Cover Screw

Tube Casing

5

ww

w.n

oris

me

dic

al.c

om

20

12

/3

Sterilized by Irradiation

Regulatory Compliance

Noris Medical - Implant Outer Label Description

Contents: Sterile package unless opened or damaged.

Noris Medical Ltd.8 Hataasiya str. Nesher 36888POB 2099 Nesher 36608Israel www.norismedical.com

Esdoornlaan 13, 3951Db MaarnThe Netherlands, www.cepartner4u.eu

All rights reserved to Noris Medical LTD. Unautorized copying of any of this catalog's material is strictly prohibited.

Caution on Use of Package Content If Package Is Opened Or Damaged

Do Not Re-Use

Consult On-Line Documents

Web Address

Manufacturer

6

20

12

/3

ww

w.n

ori

sm

ed

ica

l.c

om

About Us ................................................................................................................................2

Implant Cleaning Process ........................................................................................................3

Labeling System ......................................................................................................................4

Packaging System ...................................................................................................................5

Implants ..................................................................................................................................7

Tuff ....................................................................................................................................8

Tuff TT ...............................................................................................................................9

Onyx .................................................................................................................................. 10

Prosthetic ................................................................................................................................ 11

Healing Caps ...................................................................................................................... 12

Abutments, Straight ........................................................................................................... 13

Abutments, Angular ........................................................................................................... 14

Plastic Products .................................................................................................................. 16

Peek Products..................................................................................................................... 17

Ball Attachment / Casting ................................................................................................... 18

Transfer.............................................................................................................................. 19

Analog ............................................................................................................................... 20

Vari-Connect System .............................................................................................. 21

Ball-Connect Adapters .................................................................................. 22

Quick-Connect Adapters .............................................................................. 23

Cone-Connect Adapters ............................................................................... 23

Zirconia Products .......................................................................................... 24

Instruments and Kits ...................................................................................... 25

Drills .............................................................................................................. 26

Drivers ........................................................................................................... 27

Tools ............................................................................................................. 28

Reference Table ........................................................................................... 29

CONTENTS

7

ww

w.n

oris

me

dic

al.c

om

20

12

/3

I M P L A N T S

8

20

12

/3

ww

w.n

ori

sm

ed

ica

l.c

om

Tuff ø3.75mmDP, TitaniumIMPLANTS

Tuff - Implant Matrix, Titanium

ø6.0mmø5.0mmø4.2mmø3.75mmø3.3mmDia.

Length

NM-F6006NM-F5006NM-F4206NM-F37066mm

NM-F6008NM-F5008NM-F4208NM-F3708NM-F33088mm


NM-F6011NM-F5011NM-F4211NM-F3711NM-F331111.5mm


NM-F5016NM-F4216NM-F3716NM-F331616mm

ø3.3

ø2.8ø2.0md ø3.2 ø4.2ø3.65 ø5.2

ø3.75 ø4.2 ø5.0 ø6.0

Drill Sequence / Bone Type D3, D4


NM-S5023

Included withall implants

•Tapered Body

•2 Starts For Main Thread

•Fine 8 Starts Thread On Top

•Best For Bone Types 2, 3, 4

•Very Good Bone Condensation

•Fast Insertion

•Self-Tapping

ø2.8ø2.0md ø3.2 ø3.75-4.2 ø3.75-

4.2ø4.2 ø5-6 ø5-6ø3.65 ø5.2

ø3.75ø3.3 ø4.2 ø5.0 ø6.0

Tuff Implants have a unique three thread zones, designed specifically according to the anatomy of the bone structure. The lower V shaped thread zone is for self-tapping. The middle zone has a square type thread design especially for compressing the cancellous bone, thus helping to achieve maximum BIC. The upper zone has a micro thread design which helps in the stability as well as in preventing crestal bone loss.

Tuff Implants have a unique three thread zones, designed specifically according to the anatomy of the bone structure. The lower V shaped thread zone is for self-tapping. The middle zone has a square type thread design especially for compressing the cancellous bone, thus helping to achieve maximum BIC. The upper zone has a micro thread design which helps in the stability as well as in preventing crestal bone loss.

9

ww

w.n

oris

me

dic

al.c

om

20

12

/3

Tuff TT ø3.75mmDP, TitaniumIMPLANTS

Tuff TT - Implant Matrix, Titanium

ø6.0mmø5.0mmø4.2mmDia.

Length

NM-F6106NM-F5106NM-F43066mm

NM-F6108NM-F5108NM-F43088mm

NM-F6110NM-F5110NM-F431010mm

NM-F6111NM-F5111NM-F431111.5mm

NM-F6113NM-F5113NM-F431313mm

NM-F5116NM-F431616mm



NM-S5023


•Tapered Body

•Tapered Top



•Best For Bone Types 2, 3, 4


•Fast Insertion

•Self-Tapping

ø2.8ø2.0md ø3.2 ø4.2ø3.65 ø5.2

ø4.2 ø5.0 ø6.0

ø2.8ø2.0md ø3.2 ø3.75-4.2

ø4.2 ø5-6 ø5-6ø3.65 ø5.2

ø4.2 ø5.0 ø6.0

Tuff TT Implant uses the same three thread zone concept as the Tuff implants. Its converging coronal shape enables platform switch technology which prevents crestal bone loss.

10

20

12

/3

ww

w.n

ori

sm

ed

ica

l.c

om

Onyx ø3.75mmDP, TitaniumIMPLANTS

Onyx - Implant Matrix, Titanium





•Best For Bone Types 1, 2, 3, 4


•Easy Bone Penetration

•Tapered Body

•Self-Tapping

NM-S5023


ø6.0mmø5.0mmø4.2mmø3.75mmø3.3mmDia.

Length

NM-G6006NM-G5006NM-G4206NM-G37066mm

NM-G6008NM-G5008NM-G4208NM-G3708NM-G33088mm


NM-G6011NM-G5011NM-G4211NM-G3711NM-G331111.5mm


NM-G5016NM-G4216NM-G3716NM-G331616mm

ø2.8ø2.0md ø3.2ø3.75-

4.2 ø3.75-4.2

ø4.2 ø5-6 ø5-6ø3.65 ø5.2

ø3.75ø3.3 ø4.2 ø5.0 ø6.0

ø3.3

ø2.8ø2.0md ø3.2 ø4.2ø3.65 ø5.2

ø3.75 ø4.2 ø5.0 ø6.0

Onyx implants are specially designed for treatment involving placement in type I and also sometimes in type II bone.

11

ww

w.n

oris

me

dic

al.c

om

20

12

/3

P R O S T H E T I C S

12

20

12

/3

ww

w.n

ori

sm

ed

ica

l.c

om

3.8mm Diameter, Narrow

5.5mm Diameter

NM-H3807NM-H3806NM-H3805NM-H3804NM-H3803NM-H3802Cat. Number

7mm6mm5mm4mm3mm2mmHeight







6.3mm Diameter

Healing Caps ø3.75mmDP, TitaniumPROSTHETICS

Diameter

Height

4.6mm Diameter

13

ww

w.n

oris

me

dic

al.c

om

20

12

/3

Straight

Straight

Straight Shoulder

Straight Shoulder, Narrow

NM-A5912NM-A5911NM-A5909NM-A5908Cat. Number

12.5mm11.5mm9.5mm8.5mmHeight

4.5mmDiameter

NM-A5711NM-A5709Cat. Number

11mm9mmHeight

5.5mmDiameter


4mm3mm2mm1mmShoulder


4.5mmDiameter

NM-A5002NM-A5001

1.7mm1.7mm

9.5mm9.5mm

4.5mm

Non-Hex

NM-A5302NM-A5301NM-A5300Cat. Number

2.5mm1.5mm0.5mmShoulder

8.5mm8.5mm8.5mmHeight

3.75mmDiameter

NM-A5602NM-A5601

10.5mm8.5mm

4.5mm

NM-S8324

Included with all abutments plus available seperatly.

Shoulder

Height

Diameter

Abutments ø3.75mmDP, TitaniumPROSTHETICS

Straight Basic Abutment

NM-A5515Cat. Number

15mmHeight

9mmDiameter

Diameter

14

20

12

/3

ww

w.n

ori

sm

ed

ica

l.c

om

NM-A3609Cat. Number

9.0mmHeight

3.9mmDiameter

Straight Anatomic

Angular Standard, Narrow, Angle 15˚

Angular Standard, Angle 15˚



12mm11mm10mm9mmHeight

5.2mmDiameter


11.0mm9.0mmHeight

4.5mmDiameter

NM-A2708

8.5mm

4.5mm

NM-A2809Cat. Number

9.0mmHeight

4.5mmDiameter

Straight Narrow


8.0mm6.0mmHeight

3.8mmDiameter

Angular Standard, Angle 15˚, NT

NT - Narrow Top

Height

Diameter

Shoulder

Height

Diameter

Angle

Height

Diameter


15

ww

w.n

oris

me

dic

al.c

om

20

12

/3


12.5mm11.5mm10.5mm9.5mmShoulder

4mm3mm2mm1mmHeight

5.4mmDiameter

NM-A2400

8.5mm

0.8mm

5.4mm

Angular Anatomic, Angle 15˚

Angular Standard, Angle 25˚


11.0mm9.0mmHeight

4.5mmDiameter

NM-A3009Cat. Number

9.0mmHeight

4.5mmDiameter

NM-A3809Cat. Number

9mmHeight

4mmDiameter

NM-S8324






5.4mmDiameter

Angle

Height

Shoulder

Angular Standard, Angle 25˚, NT

NT - Narrow Top

AngularStandard, Narrow, Angle 25˚

Diameter


16

20

12

/3

ww

w.n

ori

sm

ed

ica

l.c

om

Abutments ø3.75mmDP, Plastic-Burn outPROSTHETICS

NM-C3003NM-C3002NM-C3001Cat. Number

11mm10mm9mmHeight

3mm2mm1mmShoulder


11mm10mm9mmHeight

3mm2mm1mmShoulder


11mm10mm9mmHeight

3mm2mm1mmShoulder

Angle

Height

Shoulder

Straight Anatomic Plastic

Angular Anatomic, Angle 15˚ Plastic

Angular Anatomic, Angle 25˚ Plastic

17

ww

w.n

oris

me

dic

al.c

om

20

12

/3

Abutments ø3.75mmDP, PeekPROSTHETICS


11mm10mm9mmHeight

3mm2mm1mmShoulder


11mm10mm9mmHeight

3mm2mm1mmShoulder


11mm10mm9mmHeight

3mm2mm1mmShoulder

Height

Shoulder

Straight Anatomic Peek

Angular Anatomic, Angle 15˚, Peek

Angular Anatomic, Angle 25˚, Peek

18

20

12

/3

ww

w.n

ori

sm

ed

ica

l.c

om

Ball Attachment / Casting ø3.75mmDP, TitaniumPROSTHETICS

Ball-retained dentures - (stud-attachment dentures) - Each implant that has been placed in the jawbone holds a perfectly made Titanium Ball Attachment that fits into the Housing Attachment in the

denture. The implants usually are placed in the jawbone at the front of your mouth because

there tends to be more bone in the front of the jaw than in the back, even if teeth have been missing for some time. Once you lose teeth, you begin to lose bone in the area. Also, the front jaw doesn't have many nerves or other structures that could interfere with the placement of implants.

Silicon Cap

Height

Straight Ball Attachment, Titanium

NM-T1206NM-T1205NM-T1204NM-T1203NM-T1202NM-T1201Cat. Number


NM-C1002NM-C1001Cat. Number

HexNon-Hex

NM-C2001

Hex


StraightStraightStraight Round

8.5mmHeight

4.5mmDiameter

Plastic for Casting

Abutment Lock, Plastic

Diameter 4mm

Diameter 5mm

Housing, for Internal Cap

Internal Cap, for 2.5mm Ball Attachment

NM-T3001Cat. Number

Order with:

NM-T3004NM-T3003NM-T3002Cat. Number

Silicon - StandardSilicon - SoftSilicon - Extra Soft

Height3.2mm

Diameter 2.5mm

19

ww

w.n

oris

me

dic

al.c

om

20

12

/3

Transfer For Implant ImpressionPROSTHETICS

7mm13mm

NM-S1307NM-S1610

10mm

16mm

NM-S2418

18mm

Stainless Steel, for Closed Tray

NM-T3413NM-T3409Cat. Number

13mm9mmHeight

4.7mm4.7mmDiameter

Height

NM-T3601Cat. Number

8mmHeight

4.75mmDiameter

Stainless Steel, for Closed Tray

Comes with Screw NM-S1610


12mm12mmHeight

4.5mm3.85mmDiameter


Stainless Steel for Open Tray


NM-T4012NM-T4201NM-T4202NM-T4008Cat. Number

12mm12mm8mm8mmHeight

4.75mm4.3mm4.5mm4.75mmDiameter

Height

Height

Diameter

20

20

12

/3

ww

w.n

ori

sm

ed

ica

l.c

om

Transfer / Analog For Implant ImpressionPROSTHETICS


12.7mmHeight

ø5.0mm ø4.0mmDiameter


10mm7mmHeight

4.75mmDiameter

NM-T3805NM-T3804NM-T3803NM-T3802NM-T3801Cat. Number

5mm4mm3mm2mm1mmShoulder

4.75mmDiameter

Plastic ,for Closed Tray Ball Transfer

Analog, Stainless Steel

Shoulder

Height

Diameter

Height

Diameter

DiameterStainless Steel,for Closed Tray

Ball Transfer

Ball Transfer

Analog

21

ww

w.n

oris

me

dic

al.c

om

20

12

/3

Vari-Connect Base

Ball-Connect Quick-Connect

Cone-Connect

NM-T1830

Holder

Vari-Connect System ø3.75mmDPPROSTHETICS

22

20

12

/3

ww

w.n

ori

sm

ed

ica

l.c

om


30˚18˚9˚Angle



Ball-Connect Adapters

Vari-Connect Base

Height


Silicon Cap

Housing, for Internal Cap

Internal Cap, for 2.5mm Ball Attachment

NM-T3001Cat. Number

Order with:


Silicon - StandardSilicon - SoftSilicon - Extra Soft

Diameter 5mm

Height3.2mm

An implant-supported denture is a type of overdenture that is supported by and attached to implants. An implant-supported overdenture is attached to implants, while a regular denture rests on the gums, is not supported by implants, and tends to fit less firmly in the mouth. It is the most econimical method for the patient without sacrificing structural strenght.

23

ww

w.n

oris

me

dic

al.c

om

20

12

/3


5mm4mm3mm2mmHeight

NM-T1826NM-T1825NM-T1824NM-T1823NM-T1822NM-T1821NM-T1820Cat. Number

TransferPl

AnalogSS

Sealing DiscSi

HolderPe

Housing Adapter

Pe

Mini-HousingSS

HousingSS

Description

NM-T1606NM-T1605NM-T1604NM-T1603NM-T1602NM-T1601Cat. Number

Long SleevePl*

Long SleeveSS*

Short SleeveSS*

TransferSS

AnalogSS

Healing CapSS*

Description


5mm4mm3mm2mmHeight

Height

Height

NM-S4518

*Come with screw NM-S4518

Quick-Connect Adapters

Quick-Connect Attachments

Cone-Connect Attachments

Cone-Connect Adapters


24

20

12

/3

ww

w.n

ori

sm

ed

ica

l.c

om

NM-Z3609Cat. Number

9.0mmHeight

NM-Z4802Cat. Number

9.0mmHeight

2mmShoulder

Angular Standard, Narrow,Angle 15˚

Standard, Narrow, Straight

Abutments ø3.75mmDP, ZirconiaPROSTHETICS

Angle

Height

Shoulder


NM-Z2603NM-Z2602NM-Z2601NM-Z2500Cat. Number


3mm2mm1mm0.5mmShoulder





Straight Anatomic


11mm10mm9mm8.5mmHeight


NM-S8324


25

ww

w.n

oris

me

dic

al.c

om

20

12

/3

INSTRUMENTSAND KITS

26

20

12

/3

ww

w.n

ori

sm

ed

ica

l.c

om

Countersink MarkingExtension Trephine Standard / ShortConical

NM-D34101.9mm

Cat. NumberDiameter

NM-D3412

NM-D20303.0-4.0mm

NM-D20404.0-5.0mm

NM-D20505.0-6.0mm

NM-D10343.8-4.2mm

NM-D10565.0-6.0mm

Laser Mark

Color Code

Depth Groove 16mm

13mm11.5mm

10mm8mm

6mm

Color Code

ø2.0

ø5.2

ø5.5

ø2.8

ø3.65

ø3.2

ø4.8

ø4.2

ø4.5

DrillsINSTRUMENTSAND KITS

Stainless Steel

Countersink

Trephine

Marking

Extension

27

ww

w.n

oris

me

dic

al.c

om

20

12

/3

Cat. NumberDiameter

NM-D16202.0mm

NM-D16252.5mm

NM-D16282.8mm

NM-D16323.2mm

NM-D16363.65mm

NM-D16424.2mm

NM-D16525.2mm

Cat. NumberDiameter

NM-D18202.0mm

NM-D18282.8mm

NM-D18323.2mm

NM-D18363.65mm

NM-D18424.2mm

NM-D18525.2mm

Cat. Number

NM-D1220

NM-D1225

NM-D1228

NM-D1232

NM-D1236

NM-D1242

NM-D1252

Cat. Number

NM-D1420

NM-D1428

NM-D1432

NM-D1436

NM-D1442

NM-D1452

Color Code

Standard 16mm, Internal Irrigation

Standard 11.5mm, Internal Irrigation

Standard 16mm

Standard 11.5mm

28

20

12

/3

ww

w.n

ori

sm

ed

ica

l.c

om

Conical 16mm, Internal Irrigation

Gang, 16mm, Internal Irrigation

Conical 16mm

Gang, 11.5mm, Internal Irrigation

Cat. NumberDiameter

NM-D31181.8-2.4mm

NM-D31202.0-3.2mm

NM-D31252.5-3.7mm

NM-D31272.7-4.0mm

NM-D31282.7-4.5mm

NM-D31313.1-5.5mm

Cat. NumberDiameter

NM-D36201.8-2.4mm

NM-D36282.0-3.2mm

NM-D36322.5-3.7mm

NM-D36362.7-4.0mm

NM-D36402.7-4.5mm

NM-D36523.1-5.5mm

Cat. Number

NM-D3018

NM-D3020

NM-D3025

NM-D3027

NM-D3028

NM-D3031

Cat. Number

NM-D3720

NM-D3728

NM-D3732

NM-D3736

NM-D3740

NM-D3752

DrillsINSTRUMENTSAND KITS

Stainless Steel

29

ww

w.n

oris

me

dic

al.c

om

20

12

/3

Cat. Number

RatchetNM-X1020

Tourque RatchetNM-X1021

Hand Wrench6.35mm Int. Hex

NM-X1022

Surgical Screw Driver, Long

NM-X1023

Depth ProbeNM-X1025

Driver, 1.25mm Driver, 2.1mm

LengthCat. Number

6mmNM-X1016

10mmNM-X1017

LengthCat. Number

7mmNM-X1207

10mmNM-X1210

15mmNM-X1215

Driver, 2.42mm

LengthCat. Number

7mmNM-X2607

10mmNM-X2610

15mmNM-X2615

DriversINSTRUMENTSAND KITS

Stainless Steel

30

20

12

/3

ww

w.n

ori

sm

ed

ica

l.c

om

ToolsINSTRUMENTSAND KITS

PREMIUM Surgical Kit Box

Motor Mount, 1.25mm

Motor Mount, 2.42mm

Hand Driver, 1.25mm

Guide Pin, ø2.1mm

LengthCat. Number

10mmNM-X1026

16mmNM-X1027

LengthCat. Number

20mmNM-X1014

28mmNM-X1015

LengthCat. Number

7mmNM-X1006

14mmNM-X1007

Kit NM-X2111 Contains:

LengthCat. Number

22mmNM-X1008

NM-D1034 Countersink, ø3.8-4.2mm NM-D1056 Countersink, ø5.0-6.0mm NM-D1220 Drill, ø2.0mm NM-D1228 Drill, ø2.8mm NM-D1232 Drill, ø3.2mm NM-D1236 Drill, ø3.65mm NM-D1242 Drill, ø4.2mm NM-D1252 Drill, ø5.2mm NM-D3410 Marking Drill NM-D3412 Drill Extension NM-X1207 Driver 1.25 mm, Length 7 mm NM-X1215 Driver 1.25 mm, Length 15 mm NM-X2607 Driver 2.42 mm, Length 7 mm NM-X2615 Driver 2.42 mm, Length 15 mm NM-X1007 Hand driver 1.25, Length 14 mm NM-X1008 Motor Mount 1.25, Length 22 mm NM-X1014 Motor Mount 2.42, Length 20 mm NM-X1015 Motor Mount 2.42, Length 28 mm NM-X1021 Tourque Ratchet NM-X1026 Guide pin, Length 10 mm - 2 Pcs. NM-X1027 Guide pin, Length 16 mm - 2 Pcs. NM-X1025 Depth Probe

31

ww

w.n

oris

me

dic

al.c

om

20

12

/3

KitsINSTRUMENTSAND KITS

Surgical Kit Box - Mini

Drill kit with stopper(without internal irrigation)

Drill kit with stopper(with internal irrigation)




NM-D1034 Drill, Countersink, ø3.8-4.2mm NM-D1220 Drill, ø2.0mm NM-D1228 Drill, ø2.8mm NM-D1232 Drill, ø3.2mm NM-D1236 Drill, ø3.65mm NM-D3410 Marking Drill NM-D3412 Drill Extension NM-X1215 Driver 1.25 mm, Length 15 mm NM-X2615 Driver 2.42 mm, Length 15 mm NM-X1008 Motor Mount 1.25, Length 22 mm NM-X1015 Motor Mount 2.42, Length 28 mm NM-X1020 Ratchet NM-X1026 Guide pin, Length 10 mm NM-X1027 Guide pin, Length 16 mm

30 drills.

Drill diameters:ø2.0mm, ø2.8mm, ø3.2mm, ø3.65mm, ø4.2mm, ø5.2mm

Each drill diameter has the following lengths:6mm, 8mm, 10mm, 11.5mm, 13mm

30 drills.

Drill diameters:ø2.0mm, ø2.8mm, ø3.2mm, ø3.65mm, ø4.2mm, ø5.2mm

Each drill diameter has the following lengths:6mm, 8mm, 10mm, 11.5mm, 13mm

Ø 2.0mm

Ø 2.8mm

Ø 3.2mm

Ø 3.65mm

Ø 4.2mm

Ø 5.2mm

6mm 6mm 6mm 6mm 6mm 6mm8mm 8mm 8mm 8mm 8mm 8mm

10mm 10mm 10mm 10mm 10mm 10mm11.5mm 11.5mm 11.5mm 11.5mm 11.5mm 11.5mm13mm 13mm 13mm 13mm 13mm 13mm

32

20

12

/3

ww

w.n

ori

sm

ed

ica

l.c

om

D = DiameterDP = Diameter PlatformTT = Tapered Top

NT = Narrow TopSS = Stainless SteelmmD = Diameter in mm units

mmDP = Diameter Platform in mm units Ti = Titanium

REFERENCE TABLE

NM-A2400Angular Anatomic Abutment, ø3.75mmDP, H 8.5mm, Angle 15˚, Shoulder 0.8mm, Ti

NM-A2401Angular Anatomic Abutment, ø3.75mmDP, H 9.5mm, Angle 15˚, Shoulder 1mm, Ti








NM-A2708Angular Standard Abutment, ø3.75mmDP, Angle 15˚, H 8.5mm, Ti

NM-A2807Angular Standard Abutment, NT, ø3.75mmDP, Angle 15˚, H 7.0mm, Ti












NM-A3609Angular Standard Abutment, Narrow, ø3.75mmDP, Angle 15˚, H 9.0mm, Ti

NM-A3809Angular Standard Abutment, Narrow, ø3.75mmDP, Angle 25˚, H 9.0mm, Ti

NM-A4601Straight Anatomic Abutment, ø3.75mmDP, H 9mm, Shoulder 1mm, Ti




NM-A4801Straight Shoulder Abutment, ø3.75mmDP, H 8.5mm, Shoulder 1mm, Ti




NM-A5001Straight Shoulder Abutment, ø3.75mmDP, Temporary Hex, H 9.5mm, Shoulder 1.7mm, Ti

NM-A5002Straight Shoulder Abutment, ø3.75mmDP, Temporary Non-Hex, H 9.5mm, Shoulder 1.7mm, Ti

NM-A5300Straight Shoulder Abutment, Narrow,ø3.75mmDP, H 8.5mm, Shoulder 0.5mm, Ti



NM-A5601Straight Shoulder Abutment, ø3.75mmDP, H 8.5mm, Shoulder 2.3mm, Ti

NM-A5602Straight Shoulder Abutment, Narrow, ø3.75mmDP, H 12.5mm, Shoulder 2.3mm, Ti

NM-A5908 Straight Abutment, ø3.75mmDP, H 8.5mm, Ti

NM-A5709 Straight Abutment, ø3.75mmDP, Height 9mm, Ti

NM-A5711 Straight Abutment, ø3.75mmDP, Height 11.5mm, Ti




NM-A6006 Straight Narrow Abutment, ø3.75mmDP, H 6mm, Ti

NM-A6008 Straight Narrow Abutment, ø3.75mmDP, H 8mm, Ti

NM-C1001 Plastic For Casting, Circular Base, Straight, Plastic

NM-C1002 Plastic For Casting, Hex Base, Straight, Plastic

NM-C2001 Abutment Lock, ø3.75mmDP, Plastic

NM-C2002 Abutment Lock, ø3.75mmDP, Undercut, Plastic

NM-C2003 Abutment Lock, ø3.75mmDP, Straight, Round, Plastic

NM-C2004 Abutment Lock, ø3.75mmDP, Straight, Plastic

NM-C2005 Abutment Lock, ø3.75mmDP, Angle 15˚, Plastic

NM-C3001Angular Anatomic Abutment, ø3.75mmDP, H 9mm, Angle 15˚, Shoulder 1mm, Plastic






NM-C4001Straight Anatomic Abutment, ø3.75mmDP, H 9mm, H 1mm, Plastic


33

ww

w.n

oris

me

dic

al.c

om

20

12

/3


NM-C5001Angular Anatomic Abutment, ø3.75mmDP, H 9mm, Angle 15˚, Shoulder 1mm, Peek






NM-C6001Straight Anatomic Abutment, ø3.75mmDP, H 9mm, H 1mm, Peek



NM-D1034 Drill, Countersink, ø3.8-4.2mm, SS

NM-D1056 Drill, Countersink, ø5.0-6.0mm, SS

NM-D1220 Drill, ø2.0mm, Standard, SS







NM-D1420 Drill, ø2.0mm, Short, SS






NM-D2020 Drill, ø2.0mm-3.0mm, Trephine, SS





NM-D3018 Conical Drill, ø1.8-2.4mm, 16mm L, SS






NM-D3410 Marking Drill, SS

NM-D3412 Drill Extension, SS

NM-D3620 Drill, ø2.0mm, Gang, 16mm Length, SS








NM-F3308 Implant, Tuff, ø3.75mmDP, ø3.3mmD, L 8mm, Ti


NM-F3311 Implant, Tuff, ø3.75mmDP, ø3.3mmD, L 11.5mm, Ti














REFERENCE TABLE

34

20

12

/3

ww

w.n

ori

sm

ed

ica

l.c

om

REFERENCE TABLE





NM-F4306 Implant, Tuff TT, ø3.75mmDP, ø4.2mmD, L 6mm, Ti



NM-F4311 Implant, Tuff TT, ø3.75mmDP, ø4.2mmD, L 11.5mm, Ti

























NM-G3308 Implant, Onyx, ø3.75mmDP, ø3.3mmD, L 8mm, Ti


NM-G3311 Implant, Onyx, ø3.75mmDP, ø3.3mmD, L 11.5mm, Ti


























NM-H3802 Healing Cap, ø3.75mmDP, Diameter 3.8mm, H 2mm, Ti







35

ww

w.n

oris

me

dic

al.c

om

20

12

/3





















NM-S1024 Abutment Screw, L 8.3mm, Parameter 2.4mm, Ti

NM-S1307Screw for Transfer Abutment, Closed Tray, L 13mm, Head L 7.2mm, SS

NM-S1610Screw for Transfer Abutment, Closed Tray, L 16mm Head L 10.2mm, SS

NM-S2418Screw for Transfer Abutment, Open Tray, L 24mm, Head L 18.2mm, Ti

NM-S4518 Screw for Cone-Connect Sleeve, Ti

NM-S5023 Implant Cover Screw, L 5.0mm, Ti

NM-S8324 Screw, L 8.3mm, Head L 2.4 Ti

NM-T1002 Ball-Connect Adapter, ø3.75mmDP, 2mm H, Ti




NM-T1201 Straight Ball Attachment, ø3.75mmDP, 1mm H, Ti






NM-T1402 Cone-Connect, Adapter, ø3.75mmDP, 2mm H, Ti




NM-T1601 Cone-Connect, Healing Cap, ø3.75mmDP, SS

NM-T1602 Cone-Connect, Analog, ø3.75mmDP, SS

NM-T1603 Cone-Connect, Transfer, ø3.75mmDP, SS

NM-T1604 Cone-Connect, Short Sleeve, ø3.75mmDP, SS

NM-T1605 Cone-Connect, Long Sleeve, ø3.75mmDP, SS

NM-T1606 Cone-Connect, Long Sleeve, ø3.75mmDP, Pl

NM-T1802 Quick-Connect, Adapter, ø3.75mmDP, 2mm H, Ti




NM-T1820 Quick-Connect, Housing, ø3.75mmDP, SS

NM-T1821 Quick-Connect, Mini-Housing, ø3.75mmDP, SS

NM-T1822 Quick-Connect, Housing Adapter, ø3.75mmDP, Pe

NM-T1823 Quick-Connect, Holder, ø3.75mmDP, Pe

NM-T1824 Quick-Connect, Sealing Disc, ø3.75mmDP, Si

NM-T1825 Quick-Connect, Analog, ø3.75mmDP, SS

NM-T1826 Quick-Connect, Transfer, ø3.75mmDP, Plastic

NM-T1830 Vari-Connect, Holder, ø3.75mmDP, Plastic

NM-T3001 Housing Cap, 3.2mm, SS

NM-T3002 Cap Insert, for 2.5mm Ball Attachment, Extra Soft, Silicon

NM-T3003 Cap Insert, for 2.5mm Ball Attachment, Soft, Silicon

NM-T3004 Cap Insert, for 2.5mm Ball Attachment, Standard, Silicon

NM-T3005 Cap Insert, for 2.5mm Ball Attachment, Hard, Peek

NM-T3409 Transfer, for Implant Impression (Closed Tray), 9mm H, SS

REFERENCE TABLE

36

20

12

/3

ww

w.n

ori

sm

ed

ica

l.c

om

REFERENCE TABLE





NM-T3507Transfer, for Implant Impression (Closed Tray), 12mm H, Narrow, SS



NM-T3801Transfer, for Implant Impression (Closed Tray), 1mm Shoulder H, SS





NM-T4008 Transfer, for Implant Impression (Open Tray), 8mm H, SS




NM-T4401 Transfer, for Implant Impression (Closed Tray), Short, Plastic

NM-T4402 Transfer, for Implant Impression (Closed Tray), Long, Plastic

NM-T6004 Analog, ø3.75mmDP, ø4.0mm, SS

NM-T6005 Analog, ø3.75mmDP, ø5.0mm, SS

NM-T6009 Vari-Connect Base, ø3.75mmDP, Angle 9˚, Ti



NM-X1006 Hand driver 1.25, L 7 mm

NM-X1007 Hand driver 1.25, L 14 mm

NM-X1008 Motor Mount 1.25, L 22 mm



NM-X1016 Driver 2.1 mm, L 6 mm


NM-X1020 Ratchet

NM-X1021 Tourque Ratchet

NM-X1022 Hand Wrench

NM-X1023 Surgical screw driver long

NM-X1025 Depth Probe

NM-X1026 Guide pin, L 10 mm

NM-X1027 Guide pin, L 16 mm

NM-X1028 Drill extension




NM-X2011 Surgical Kit, Box

NM-X2211 Surgical Kit, Box - mini

NM-X2212 Drill kit with stopper (without internal irrigation)

NM-X2214 Drill kit with stopper (with internal irrigation)

NM-X2002 Surgical Kit, mini-Box




NM-Z2300Angular Anatomic Abutment, ø3.75mmDP, H 9.5mm, Angle 15˚, Shoulder 0.5mm, Zi

NM-Z2601Angular Anatomic Abutment, ø3.75mmDP, H 9.5mm, Angle 15˚, Shoulder 1mm, Zi



NM-Z2500Angular Anatomic Abutment, ø3.75mmDP, H 9.5mm, Angle 25˚, Shoulder 0.5mm, Zi




NM-Z3609Angular Standard Abutment, Narrow, ø3.75mmDP, Angle 15˚, H 9.0mm, Zi

NM-Z4500Straight Anatomic Abutment, ø3.75mmDP, H 8.5mm, Shoulder 0.5mm, Zi

NM-Z4601Straight Anatomic Abutment, ø3.75mmDP, H 9mm, Shoulder 1mm, Zi




37

ww

w.n

oris

me

dic

al.c

om

20

12

/3

NOTES

ww

w.n

oris

me

dic

al.c

om

20

12

/3

NOTES

Haifa Offices:Tel: +972-73-7964477Fax: +972-4-6950991Mailing Address: POB 2099 Nesher, Israel 36608

New York Offices: +1-248-5628617

Moscow Offices: +7-495-984 67 47

India Offices: +91-22-66395408

Genenral Inquries: [email protected]

Distribution: [email protected]

Websites: www.norismedical.com www.norismedical.de

www.norismedical.ru Skype: norismedical

S t a t e o f t h e A r t D e n t a l P r o d u c t s

Noris Medical Catalog V3

Documents

Transcript of Noris Medical Catalog V3