NONTOX® is a powerful bio-catalytic agent for the cleaning of soils and all hard surfaces of TPH (Total Petroleum Hydrocarbon) pollutants, releasing the TPH pollutants in a form more compatible for microbial remediation.

NONTOX® stimulates natural biological reactions within indigenous microbial ecosystems through enhancement of oxygen transfer supporting accelerated remediation rates of the TPH pollutants.

NONTOX® will treat virtually all TPH pollutants, including: crude oil, jet fuel, and diesel oil.• Enhances remediation of TPH (Total Petroleum Hydrocarbons).• Provides excellent surface cleaning and release of TPH components.• Treats all types of petroleum hydrocarbon contamination.• Helps in the precipitation of metals in wastewater discharges.• Reduces time associated with soil and water remediation and

cleanup.• Provides immediate and ongoing VOC (Volatile Organic

Compounds) suppression.• Reduces fire hazards, increasing flash points, and auto ignition

threshold points, in gasoline or fuel oils.• Does not require personal protective equipment.

NONTOX® is fully compatible all application equipment, including: hand or power sprayers, helicopter, airplane, or floating equipment. NONTOX® requires no special personnel protective equipment.

APPLICATION RATE / CONCENTRATIONNONTOX® may be applied to TPH contaminated soil, shorelines and beaches: a dilution of NONTOX® at dilutions of 0.2% - 2%. Rates of application will vary with TPH concentrations, equipment specifications, and soil types.

For general dilution ratios, use a mixture of 4 gallons (15.2 liters) of Water containing 1 gallon (1 Liter) of NONTOX® to treat 1 cubic yard of contaminated soil.

NONTOX®should be allowed to penetrate for up to 30 minutes to maximize contact time. Type of power washing system will determine optimum dilution rate.

Cleaning Dilution:For Light Cleaning: Use 1 part NONTOX® per 256 parts water. For Heavy Cleaning: Use 1 part NONTOX® per 50 parts water.

Conditions for Use: Water salinity does not negatively affect product performance. Water temperature under 2°C can affect product performance. Aged or highly viscous concentrations of hydrocarbon may require presoaking prior to removal.

Optimum Storage Temp: 25°C to 40°C with no phase separations or chemical changes observed.

Flammability: None

Shelf Life: Maximum 2 years.

Special Handling and Worker Precautions for Storage and Field Application: None

Skin, Eye and Hand Contact: Use of protective eyewear and rubber gloves is recommended under normal GMP’s.

Ventilation: None required; Respiratory Protection: None

Maximum and Minimum Storage Temperatures: Maximum temp: 50°C, Minimum temp: 2°C

bio-organic.com

NONTOX®

MANUFACTURED IN THE USA UNDER DOMESTIC AND INTERNATIONAL PATENTS

NONTOX ®

BIO-CATALYTIC TREATMENT OF PETROLEUM HYDROCARBONS

Information on Basic Physical and Chemical Properties

AppearancePhysical State LiquidColor Colorless - pale amberOdor MildpH Full Strength Concentrate 3.9 – 4.3 At recommended use dilutions, pH ranges 6.3 to 6.9Freezing Point See Pour PointBoiling Point (760 mmHg) > 100 °C at 760 mmHg Calculated Flash Point ASTM D 93 Closed Cup >93oCDensity (water = 1) 1.002 @ 20°C / 20°CWater Solubility 100% in waterKinematic Viscosity @ 40oC 2.3373 cstPour Point 2.22°C or (+28°F)

Environmental fate: Persistence and Degradability: The material is readily biodegradable. Passes OECD test(s) for ready biodegradability.

TM

SEAL OF SAFETYTM

The Bio-Organic Seal of SafetyTM is our trademark declaration of our commitment to offering green biocatalytic solutions that shift the

treatment of our water resources to a more sustainable ecological model.