Nominal Diameter TEMA Series 5.5 = 24 mm2...
Transcript of Nominal Diameter TEMA Series 5.5 = 24 mm2...
ISO-G 1/8
4
TEM
A Lo
wpr
essu
reBr
ass/
Stee
l
Single Shut-Off
Couplings with valve
Connection A SWmm
Lmm
Dmm
L1mm
L2mm
SW1SW1
Bmm
Seal Version Part Number
G 1/4 15 37 18 8 Standard
Standard
1100 A
1100 AV
Male Thread
TEMA Series 1100
Actu
al s
ize
Nominal Diameter
= 24 mm25.5 1100
Interchangeability
CouplingValveSleeveSpring/Locking RingLocking BallsSeals
Tema design
Working PressurePB = 30 bar, maximum static working pressure with safety factor of 4 to 1.
Material
Coupling
Plug
Plug
Brass, Chrome PlatedBrassBrass, Nickel PlatedAISI 301AISI 420 CNBR alt. FKM
Standard
Steel, Hardened, Zinc-Plated
1100 is a product series used main-ly in compressed air applications. It is best suited for smaller pneumatic systems and compressed air tools with flows up to 900 litres per minute. It has a compact design with small outside dimensions and is known for its robust design. This series require two hands to connect and one hand to discon-nect.
AdvantagesHigh flow performanceSmall installation dimensionsRobust designHigh corrosion resistance
Working Temperature*-40°C up to +100°C (NBR)-25°C up to +200°C (FKM)
*At temperature below -40°C and above +100°C special seals are available on request.
Technical Description
Air
Chart
Pres
sure
Dro
p (b
ar)
Flow Rate in l/min
TEMA Series
NBR
FKM15 37 18 8G 1/4
Female Thread
G 1/8 15 38 18 8 Standard
Standard
1100
1100 V
NBR
FKM15 38 18 8G 1/8
Plug Profile 1:1
5
Plugs without valve
Connection A SW mm
Lmm
Dmm
L1mm
L2mm
SW1mm
Bmm
Gmm
Version Part Number
G 1/8 12 27 7,5 Standard 11110-QC
Male Thread
TEMA Series 1100
TEM
A Lo
wpr
essu
reBr
ass/
Stee
l
Dust Protection TEMA Series 1100
55 2315-QC
125-QC
15
L mm D mm Material Color Part Number
Red
Red
G 1/8 12 27 7 Standard 11410
Female Thread
Hose Barb
5 mm 33 16 Standard 11005-QC
6 mm 33 16 Standard 11006-QC
PVC
55 15 PVC
Coupling
Plug
6
TEM
A Lo
wpr
essu
reBr
ass/
Stee
l
Single Shut-Off
Couplings with valve
Connection A SWmm
Lmm
Dmm
L1mm
L2mm
SW1SW1
Bmm
Seal Version Part Number
Standard 1300 A
Male Thread
TEMA Series 1300
Actu
al s
ize
Nominal Diameter
= 43 mm26.8 1300
Interchangeability
BackbodyValve BodySleeveValveSpring PlateSpring, Locking RingLocking BallsSeals
Tema designRECTUS 31 KA
Working PressurePB = 35 bar, maximum static working pressure with safety factor of 4 to 1.
Material
Coupling
Plug
Plug
Brass, Nickel PlatedSteel, Black NitritedBrass, Nickel PlatedBrassBrassAISI 301AISI 420 CNBR
Standard
Steel, Hardened, Zinc-Plated
1300 is a product series used main-ly in compressed air applications. It is best suited for small to medium sized pneumatic systems and compressed air tools with flows up to 1400 litres per minute. It has a compact design and high flow due to the UltraFlo technology.This series require two hands to connect and one hand to discon-nect.
AdvantagesVery high flow performanceRobust designHigh corrosion resistance
Working Temperature*-20°C up to +100°C (NBR)
*At temperature below -20°C and above +100°C special seals are available on request.
Technical Description
Air
Chart
Pres
sure
Dro
p (b
ar)
Flow Rate in l/min
TEMA Series
NBR18 49 22 12R 3/8
Female Thread
G 1/4 18 49 22 9 Standard
Standard
1300-QC
1300 B
NBR
NBR20 50 22 10G 3/8
Plug Profile 1:1
7
TEM
A Lo
wpr
essu
reBr
ass/
Stee
l
Single Shut-Off
Couplings with valve
Connection A SWmm
Lmm
Dmm
L1mm
L2mm
SW1SW1
Bmm
Seal Version Part Number
R 1/4 19 58 22 12 Standard
Standard
1300 EC
1300 EA
Male Thread
TEMA Series 1300 E
Actu
al s
ize
Nominal Diameter
= 43 mm27.4
Interchangeability
BackbodyValve BodySleeveValveSpring PlateSpring, Locking RingLocking BallsSeals
Tema designRECTUS 31 KA
Working PressurePB = 35 bar, maximum static working pressure with safety factor of 4 to 1.
Material
Coupling
Plug
Plug
Brass, Nickel PlatedSteel, Black NitritedBrass, Nickel PlatedBrassBrassAISI 301AISI 420 CNBR
Standard
Steel, Hardened, Zinc-Plated
1300 E is a product series used mainly in compressed air applica-tions. It is best suited for small to medium sized pneumatic systems and compressed air tools with flows up to 1400 litres per minute. It has a compact design and high flow due to the UltraFlo technology. This series require one hand to con-nect and one hand to disconnect.
AdvantagesVery high flow performanceRobust designHigh corrosion resistanceSingle hand operation
Working Temperature*-20°C up to +100°C (NBR)
*At temperature below -20°C and above +100°C special seals are available on request.
Technical Description
Air
Chart
Pres
sure
Dro
p (b
ar)
Flow Rate in l/min
1300 ETEMA Series
NBR
NBR19 56 22 12R 3/8
Female Thread
G 1/4 19 55 22 9 Standard
Standard
1300 E
1300 EB
NBR
NBR20 55 22 10G 3/8
Standard 1300 EDNBR23 59 26 14R 1/2
6 mm 19 78 22 23 Standard
Standard
1300 EK06
1300 EK08
NBR
NBR19 78 22 238 mm
Standard 1300 EK10NBR19 78 22 2310 mm
Standard 1300 EK12NBR19 77 22 2413 mmHose Barb
Plug Profile 1:1
8
Plugs without valve
Connection A SW mm
Lmm
Dmm
L1mm
L2mm
SW1mm
Bmm
Gmm
Version Part Number
R 1/8 13 35 9 Standard 13110-QC
Male Thread
TEMA Series 1300/1300 E
TEM
A Lo
wpr
essu
reBr
ass/
Stee
l
Dust Protection TEMA Series 1300/1300 E
120 1315-QC
1325-QC
18
L mm D mm Material Color Part Number
Red
Red
G 1/8 13 32 8,5 Standard 13405
Female Thread
Hose Barb
6 mm 44 23 Standard 13006
8 mm 44 23 Standard 13008-QC
PVC
90 18 PVC
R 1/4 14 38 12 Standard 13210 A
G 1/4 14 35 12 Standard 13210-QC
R 3/8 17 38 12 Standard 13220
R 1/2 22 40 14 Standard 13230
G 1/4 16 36 10 Standard 13410
G 3/8 20 36 10 Standard 13420
G 1/2 25 39 12 Standard 13430-QC
12
12
10 mm 44 24 Standard 13010-QC12
12 mm 47 23 Standard 13012-QC12
Safety Plug TEMA Series 1300/1300 E
Connection A SW mm
Lmm
Dmm
L1mm
L2mm
SW1mm
Bmm
Gmm
Version Part Number
Female Thread
G 1/4 20 53 12 Standard 13410 S
Coupling
Plug
9
TEM
A Lo
wpr
essu
reBr
ass/
Stee
l
10
TEM
A Lo
wpr
essu
reBr
ass/
Stee
l
Single Shut-Off
Actu
al s
ize
Nominal Diameter
= 25 mm25.5 1400Working Pressure
TEMA Series
Plug Profile 1:1
Coupling with valve
Connection A SWmm
Lmm
Dmm
L1mm
L2mm
SW1SW1
Bmm
Seal Version New Part Number
Old Part Number
R 1/4 19 65 23 12 Standard
Standard
1400KA AK 13SPN1400 C
1400KA AK17 SPN1400 D
Male Thread
TEMA Series 1400
Interchangeability
BackbodyValve BodySleeveValveSpring PlateSpring, Locking RingLocking BallsSeals
INDUSTR. INTERCHANGE 1/4“US-MIL-SPEC-C-4109ISO 6150 BRECTUS 23 + 24RECTUS 1423TEMA 1400CEJN 310, HANSEN 3000FASTER, GROMELLE 600PARKER 20 1/4“ + 30 1/4“JWL 521 + JWL 531
PB = 35 bar, maximum static working pressure with safety factor of 4 to 1.
Material
Coupling
Plug
Plug
Brass, Nickel PlatedSteel, QPQ treatedBrass, Nickel PlatedBrassBrassAISI 301AISI 420 CNBR
Standard
Steel, Hardened, Zinc-Plated
1400 is a product series used mainly in compressed air applications. It is best suited for small to medium sized pneumatic systems and compressed air tools with flows up to 900 litres per minute. The ¼’’ coupling is conforming to ISO 6150 B and has can be operated with minimum force.This series require one hand to con-nect and one hand to disconnect.
AdvantagesMinimum coupling force neededSingle hand operationRobust designHigh corrosion resistance
Working Temperature*-20°C up to +100°C (NBR)
*At temperature below -20°C and above +100°C special seals are available on request.
Technical Description
Air
Chart
Pres
sure
Dro
p (b
ar)
Flow Rate in l/min
NBR
NBR19 65 23 12R 3/8
Female Thread
G 1/4 19 59 23 9 Standard
Standard
1400KA IW13 SPN1400
1400KA IW17 SPN1400 A
NBR
NBR19 59 23 9G 3/8
Standard 1400KA AK21 SPN1400 FNBR22 59,5 23 17R 1/2
6 mm 19 80 23 25 Standard
Standard
1400KA TF06 SPN1400 K06
1400KA TF08 SPN1400 K08
NBR
NBR19 80 23 258 mm
Standard 1400KA TF10 SPN1400 K10NBR19 80 23 2510 mm
Standard 1400KA TF13 SPN1400 K12NBR19 80 23 2512 mm
Standard 1400KA IW21 SPN1400 GNBR24 62 23 12G 1/2
Hose Barb
11
Plugs without valve
Connection A SW mm
Lmm
Dmm
L1mm
L2mm
SW1mm
Bmm
Gmm
Version New Part Number
Old Part Number
R 1/8 13 39 9 Standard 14110 23SF AK10 SXN
Male Thread
TEMA Series 1400
TEM
A Lo
wpr
essu
reBr
ass/
Stee
l
Dust Protection TEMA Series 1400
145 3826
1325-QC
46
L mm D mm Material Color Part Number
Blue
Red
G 1/8 14 36 9 Standard 14405 23SF IW10 SXN
Female Thread
Hose Barb
6 mm 51 25 Standard 14006 23SF TF06 SXN
8 mm 51 25 Standard 14008 23SF TF08 SXN
PVC
90 18 PVC
R 1/4 14 42 12 Standard 14210 23SF AK13 SXN
R 3/8 17 42 12 Standard 14220 23SF AK17 SXN
R 1/2 22 48 17 Standard 14230 23SF AK21 SXN
G 1/4 17 36 9 Standard 14410 23SF IW13 SXN
G 3/8 19 36 9 Standard 14420 23SF IW17 SXN
G 1/2 24 39 12 Standard 14430 23SF IW21 SXN
14
14
10 mm 51 25 Standard 14010 23SF TF10 SXN14
10 mm 51 25 Brass 14010 M 23SF TF10 MXX14
13 mm 51 25 Standard 14012 23SF TF13 SXN15
Coupling
Plug
12
TEM
A Lo
wpr
essu
reBr
ass/
Stee
l
Single Shut-Off
Couplings with valve
Connection A SWmm
Lmm
Dmm
L1mm
L2mm
SW1SW1
Bmm
Seal Version
R 1/4 19 65 23 12 Standard
Standard
1600KAAK13SPN1600 D
1600KAAK17SPN1600 A
Male Thread
TEMA Series 1600
Actu
al s
ize
Nominal Diameter
= 48 mm27.8 1600
Interchangeability
BackbodyValve BodySleeveValveSpring PlateSpring, Locking RingLocking BallsSeals
RECTUS 25 + 26RECTUS 1625TEMA 1600CEJN 320JWL 520 + JWL 530various German products
Working PressurePB = 35 bar, maximum static working pressure with safety factor of 4 to 1.
Material
Coupling
Plug
Plug
Brass, Nickel PlatedSteel, QPQ treatedBrass, Nickel PlatedBrassBrassAISI 301AISI 420 CNBR
Standard
Steel, Hardened and Zinc-Plated
1600 is a product series used mainly in compressed air applica-tions. It is best suited for medium to large sized pneumatic systems and compressed air tools with flows up to 2000 litres per minute. The ¼’’ coupling is conforming to ISO 6150 B and has can be operated with minimum force.This series require one hand to connect and one hand to disconnect.
AdvantagesMinimum coupling force neededSingle hand operationRobust designHigh corrosion resistance
Working Temperature*-20°C up to +100°C (NBR)
*At temperature below -20°C and above +100°C special seals are available on request.
Technical Description
Air
Chart
Pres
sure
Dro
p (b
ar)
Flow Rate in l/min
TEMA Series
NBR
NBR19 65 23 12R 3/8
Female Thread
G 1/4 19 59 23 9 Standard
Standard
1600KAIW13SPN1600
1600KAIW17SPN1600 B
NBR
NBR19 59 23 9G 3/8
Standard 1600KAAK21SPN1600 CNBR22 59,5 23 17R 1/2
6 mm 19 80 23 25 Standard
Standard
1600KATF06SPN1600 K06
1600KATF08SPN1600 K08
NBR
NBR19 80 23 258 mm
Standard 1600KATF10SPN1600 K10NBR19 80 23 2510 mm
Standard 1600KATF13SPN 1600 K12NBR19 80 23 2513 mm
Standard 1600KAIW21SPN1600 FNBR24 62 23 12G 1/2
Hose Barb
Plug Profile 1:1
Old Part Number
New Part Number
13
TEM
A Lo
wpr
essu
reBr
ass/
Stee
l
Plugs without valve
Connection A SW mm
Lmm
Dmm
L1mm
L2mm
SW1mm
Bmm
Gmm
Version
R 1/8 13 33 9 Standard 16110-QC 25SF AK10 SXZ
Male Thread
TEMA Series 1600
Dust Protection TEMA Series 1600
120 1315-QC
1325-QC
18
L mm D mm Material Color Part Number
Red
Red
G 1/8 14 30 7 Standard 16405 25SF IW10 SXZ
Female Thread
Hose Barb
6 mm 48 25 Standard 16006 25SF TF06 SXZ
8 mm 48 25 Standard 16008-QC 25SF TF08 SXZ
PVC
90 18 PVC
R 1/4 14 37 12 Standard 16210-QC 25SF AK13 SXZ
R 3/8 17 37 12 Standard 16220-QC 25SF AK17 SXZ
G 1/4 17 38,5 9 Standard 16410 25SF IW13 SXZ
G 3/8 19 39,5 9 Standard 16420 25SF IW17 SXZ
G 1/2 24 44 12 Standard 16430 25SF IW21 SXZ
12
12
10 mm 48 25 Standard 16010 25SF TF10 SXZ12
12 mm 46 24 Standard 16012 25SF TF12 SXZ ??16
Safety Plug TEMA Series 1600
Connection A SW mm
Lmm
Dmm
L1mm
L2mm
SW1mm
Bmm
Gmm
Version Part Number
Female Thread
G 1/4 20 53 12 Standard 16410 S
R 1/2 22 43 17 Standard 16230 25SF AK21 SXZ
Protective Sleeve - Coupling TEMA Series 1600
73 1300-351 BK33
L mm D mm Material Color Part Number
BlackEBA
Coupling
Plug
Old Part Number
New Part Number
18
TEM
A Lo
wpr
essu
reBr
ass/
Stee
l
Single Shut-Off
Couplings with valve
Connection A SWmm
Lmm
Dmm
L1mm
L2mm
SW1SW1
Bmm
Seal Version Part Number
R 1/4 19 60 23 12 Standard
Standard
1650 D
1650 A
Male Thread
TEMA Series 1650
Actu
al s
ize
Nominal Diameter
= 50 mm28 1650
Interchangeability
BackbodyValve BodySleeveValveInner SleeveSpring PlateSpring, Locking RingLocking BallsSeals
RECTUS 33KAATLAS COPCO QIC 10
Working PressurePB = 35 bar, maximum static working pressure with safety factor of 4 to 1.
Material
Coupling
Plug
Plug
Brass, Nickel PlatedSteel, Zinc PlatedSteel, Hardened, Nickel PlatedBrassBrassBrassAISI 301AISI 420NBR
Standard
Steel, Hardened, Nickel Plated
Steel industrial coupling with high flow performance due to UltraFlo technology. Interchangeable with At-las Copco profile. Specially suited to use with gaseous media in industry.
AdvantagesSingle handed operation. Extremely high flow performance from opti-mum valve design.
Working Temperature*-20°C up to +100°C (NBR)
*At temperature below -20°C and above +100°C special seals are available on request
Technical Description
Air
Chart
Pres
sure
Dro
p (b
ar)
Flow Rate in l/min
TEMA Series
NBR
NBR19 59 23 12R 3/8
Female Thread
G 1/4 19 55 23 10 Standard
Standard
1650
1650 B
NBR
NBR19 54 23 9G 3/8
Standard 1650 CNBR22 60 23 17R 1/2
6 mm 19 73 23 25 Standard
Standard
1650 K06
1650 K08
NBR
NBR19 73 23 258 mm
Standard 1650 K10NBR19 73 23 2510 mm
Standard 1650 K12NBR19 73 23 2513 mm
Standard 1650 FNBR24 57 23 12G 1/2
Hose Barb
Plug Profile 1:1
19
Plugs without valve
Connection A SW mm
Lmm
Dmm
L1mm
L2mm
SW1mm
Bmm
Gmm
Version Part Number
R 1/8 14 40 9 Standard 165110
Male Thread
TEMA Series 1650
TEM
A Lo
wpr
essu
reBr
ass/
Stee
l
G 1/8 14 34 7 Standard 165405
Female Thread
Hose Barb
6 mm 52 25 Standard 165006-QC
8 mm 52 25 Standard 165008-QC
R 1/4 14 42 12 Standard 165210-QC
R 3/8 17 42 12 Standard 165220
R 1/2 22 47 17 Standard 165230
G 1/4 17 37 9 Standard 165410
G 3/8 17 37 9 Standard 165420
G 1/2 24 42 12 Standard 165430
14
14
10 mm 52 25 Standard 16501015
13 mm 52 25 Standard 16501215
16
TEM
A Lo
wpr
essu
reBr
ass/
Stee
l
Single Shut-Off
Couplings with valve
Connection A SWmm
Lmm
Dmm
L1mm
L2mm
SW1SW1
Bmm
Seal Version Part Number
R 3/8 24 70 27 12 Standard
Standard
1700KA AK17 SPN
1700KA AK21 SPN
Male Thread
TEMA Series 1700
80%
of a
ctua
l siz
e
Nominal Diameter
= 80 mm210 1700
Interchangeability
BackbodyValve BodySleeveValveSpringLocking Ring, Locking BallsSeals
RECTUS 27RECTUS 1727CEJN 410
Working PressurePB = 35 bar, maximum static working pressure with safety factor of 4 to 1.
Material
Coupling
Plug
Plug
Brass, Nickel PlatedSteel, QPQ treatedBrass, Nickel PlatedBrassAISI 301AISI 420 CNBR
Standard
Steel, Hardened, Zinc-Plated
Premium industrial coupling in nominal diameter 10 with high grade valve technology and unpre-cedented flow values and minimum coupling forces. Especially suited to compressed air applications with above average air consumption.
AdvantagesSingle handed operation. High flow valve. Minimum coupling forces.
Working Temperature*-20°C up to +100°C (NBR)
*At temperature below -20°C and above +100°C special seals are available on request
Technical Description
Air
Chart
Pres
sure
Dro
p (b
ar)
Flow Rate in l/min
TEMA Series
NBR
NBR24 75 27 17R 1/2
Female Thread
G 3/8 24 64,5 27 10 Standard
Standard
1700KA IW17 SPN
1700KA IW21 SPN
NBR
NBR24 68 27 11G 1/2
Standard 1700KA AK26 SPNNBR27 64 27 17R 3/4
10 mm 24 80 27 21 Standard
Standard
1700KA TF10 SPN
1700KA TF13 SPN
NBR
NBR24 80 27 2113 mm
Standard 1700KA TF16 SPNNBR24 80 27 2116 mm
Standard 1700KA IW26 SPNNBR32 69 27 14G 3/4
Hose Barb
Plug Profile 1:1
17
Plugs without valve
Connection A SW mm
Lmm
Dmm
L1mm
L2mm
SW1mm
Bmm
Gmm
Version
R 1/4 17 40 12 Standard 27SF AK13 SXN17110
Male Thread
TEMA Series 1700
TEM
A Lo
wpr
essu
reBr
ass/
Stee
l
Dust Protection TEMA Series 1700
195 7526
2526-QC
76
L mm D mm Material Color Part Number
Blue
Blue
G 1/4 17 33 9 Standard 27SF IW13 SXN27SF IW13 SXN
Female Thread
Hose Barb
6 mm 48 25 Standard 27SF TF06 SXN27SF TF06 SXN
8 mm 48 25 Standard 27SF TF08 SXN17008-QC
PVC
170 60 PVC
R 3/8 17 40 12 Standard 27SF AK17 SXN17210
R 1/2 22 45 17 Standard 27SF AK21 SXN17220
R 3/4 27 48 19 Standard 27SF AK26 SXN27SF AK26 SXN
G 3/5 19 33 12 Standard 27SF IW17 SXN17410
G 1/2 24 37 12 Standard 27SF IW21 SXN17420
G 3/4 32 42 16 Standard 27SF IW26 SXN27SF IW26 SXN
15
15
9 mm 48 25 Standard 27SF TF09 SXN27SF TF09 SXN15
10 mm 48 25 Standard 27SF TF10 SXN17010-QC15
Safety Plug TEMA Series 1700
Connection A SW mm
Lmm
Dmm
L1mm
L2mm
SW1mm
Bmm
Gmm
Version Part Number
Female Thread
G 3/8 16 67 12 Standard 17410 S
13 mm 48 25 Standard 27SF TF12 SXN1701215
16 mm 48 25 Standard 27SF TF16 SXN17016-QC18
19 mm 48 25 Standard 27SF TF19 SXN1701921
Coupling
Plug
Old Part Number
New Part Number
18
TEM
A Lo
wpr
essu
reBr
ass/
Stee
l
Single Shut-Off
Couplings with valve
Connection A SWmm
Lmm
Dmm
L1mm
L2mm
SW1SW1
Bmm
Seal Version Part Number
R 1/4 24 70 28 12 Standard
Standard
1750 D
1750 A
Male Thread
TEMA Series 1750
85%
of a
ctua
l siz
e
Nominal Diameter
= 80 mm210 1750
Interchangeability
BackbodyValve BodySleeveValveInner SleeveSpring PlateSpring and Locking RingLocking BallsSeals
RECTUS 34KAATLAS COPCO QIC 15
Working PressurePB = 35 bar, maximum static working pressure with safety factor of 4 to 1.
Material
Coupling
Plug
Plug
Brass, Nickel PlatedSteel, Nickel PlatedSteel, Hardened, Nickel PlatedBrassBrassBrassAISI 301AISI 420NBR
Standard
Steel, Hardened, Nickel Plated
Industrial profile with UltraFlo technology. Interchangeable with Atlas Copco profiles. High flow performance. The robust design and steel sleeve make it optimal for use with large pneumatic consumers.
AdvantagesSingle handed operation. Low Pressure drop. No damage to the valve body from binding design.
Working Temperature*-20°C up to +100°C (NBR)
*At temperature below -20°C and above +100°C special seals are available on request
Technical Description
Air
Chart
Pres
sure
Dro
p (b
ar)
Flow Rate in l/min
TEMA Series
NBR
NBR24 70 28 12R 3/8
Female Thread
G 1/4 24 64 28 9 Standard
Standard
1750 B
1750
NBR
NBR24 64 28 12G 3/8
Standard 1750 CNBR24 72 28 12R 1/2
6 mm 24 84 28 25 Standard
Standard
1750 K06
1750 K08
NBR
NBR24 84 28 258 mm
Standard 1750 K10NBR24 84 28 2510 mm
Standard 1750 K12NBR24 84 28 2512 mm
Standard 1750 FNBR24 64 28 12G 1/2
Hose Barb
Standard 1750 GNBR27 72 28 12R 3/4
Standard 1750 ENBR24 64 28 12G 3/4
Standard 1750 K16NBR24 84 28 2516 mm
Standard 1750 K19NBR24 84 28 2519 mm
Plug Profile 1:1
19
Plugs without valve
Connection A SW mm
Lmm
Dmm
L1mm
L2mm
SW1mm
Bmm
Gmm
Version Part Number
R 1/4 17 46 12 Standard 175110
Male Thread
TEMA Series 1750
TEM
A Lo
wpr
essu
reBr
ass/
Stee
l
G 1/4 19 40 9 Standard 175410
Female Thread
Hose Barb
6 mm 55 25 Standard 175006
10 mm 55 25 Standard 175010
R 3/8 19 46 12 Standard 175210
R 1/2 22 52 17 Standard 175220
G 3/8 19 40 9 Standard 175420
G 1/2 24 44 12 Standard 175430
15
15
13 mm 55 25 Standard 175012-QC15
16 mm 55 25 Standard 17501618
20
TEM
A Lo
wpr
essu
reBr
ass/
Stee
l
Single Shut-Off
Couplings with valve
Couplings without valve
Connection A
Connection A
SWmm
SWmm
Lmm
Lmm
Dmm
Dmm
L1mm
L1mm
L2mm
L2mm
SW1SW1
SW1SW1
Bmm
Bmm
Seal
Seal
Version
Version
Part Number
Part Number
Standard 1800 A
Male Thread
TEMA Series 1800
TEMA Series 1800
Nominal Diameter
= 78 mm210 1800
Interchangeability
Back BodyValve BodyLocking SleeveValveSpringsLocking BallsSeals
TEMA 1800 ERECTUS 32 KA
Working PressurePB = 35 bar, maximum static working pressure with safeety factor of 4 to 1.
Material
Coupling
Plug
Plug
Brass, Nickel PlatedBrass, Chrome PlatedBrass, Nickel PlatedBrassAISI 301AISI 420 CNBR
Standard
Steel, hardened, zinc plated, passivated
Industrial coupling for pneumatic tools. Robust design for long service durability. Two hand operated.
AdvantagesExcellent flow performance. Wide field of applications.
Working Temperature*-20°C up to +100°C (NBR)
*At temperature below -20°C and above +100°C special seals are available on request.
Technical Description
Air
Chart
Pres
sure
Dro
p (b
ar)
Flow Rate in l/min
TEMA Series
NBR22 54 27 13R 1/2
Female Thread
Female Thread
G 3/8 22 54 27 10 Standard
Standard
Standard
1800-QC
1800 B
1800 H
NBR
NBR
NBR
24
22
55
43
27
27
10G 1/2
G 3/8
Standard
Standard
1800 C
1800 HV
NBR
FKM
30
22
57
43
27
27
11G 3/4
G 3/8
Plug profile 1:1
21
Plugs
Connection A SW mm
Lmm
Dmm
L1mm
L2mm
SW1mm
Bmm
Gmm
Version Part Number
R 1/8 16 36 10 Standard 18105
Male Thread
TEMA Series 1800
TEM
A Lo
wpr
essu
reBr
ass/
Stee
l
Dust Protection TEMA Series 1800
170 5026-QC
2526-QC
52
L mm D mm Material Color Part Number
Blue
Blue
G 1/4 16 36 10 Standard 18405
Female Thread
Hose Barb
6 mm 44 23 Standard 18006
8 mm 44 23 Standard 18008
PVC
170 60 PVC
R 1/4 16 39 12 Standard 18110 A
G 1/4 16 35 9 Standard 18110
R 3/8 17 38 12 Standard 18210 A
G 3/8 17 36 10 Standard 18210
G 3/8 20 36 10 Standard 18410
G 1/2 25 39 12 Standard 18420
G 3/4 30 54 12 Brass 18430 M
16
16
10 mm 44 23 Standard 1801016
13 mm 45 24 Standard 1801216
Safety plug TEMA Series 1800
Connection A SW mm
Lmm
Dmm
L1mm
L2mm
SW1mm
Bmm
Gmm
Version Part Number
Female Thread
G 3/8 26 67 10 Standard 18410 S
Protective Sleeve - Coupling TEMA Series 1800
78 1800-351 38
L mm D mm Material Color Part Number
BlueEBA
R 1/2 22 40 14 Standard 18220
R 3/4 27 43 16 Standard 18230
16 mm 47 24 Standard 1801618
19 mm 47 24 Standard 1801921
Coupling
Plug
22
TEM
A Lo
wpr
essu
reBr
ass/
Stee
l
Single Shut-Off
Couplings with valve
Connection A SWmm
Lmm
Dmm
L1mm
L2mm
SW1SW1
Bmm
Seal Version Part Number
R 3/8 23 69 27 11 Standard
Standard
1800 ED
1800 EA
Male Thread
TEMA Series 1800 E
85 %
of a
ctua
l siz
e
Nominal Diameter
= 80 mm210 1800 E
Interchangeability
BackbodyValve BodySleeveValveDistanshylsorSpring PlateSpring, Locking RingLocking BallsSeals
Tema designRECTUS 32 KA
Working PressurePB = 35 bar, maximum static working pressure with safety factor of 4 to 1.
Material
Coupling
Plug
Plug
Brass, Nickel PlatedBrass, Chrome PlatedBrass, Nickel PlatedBrassBrassBrassAISI 301AISI 420 CNBR
Standard
Steel, Hardened, Zinc-Plated
Industrial coupling with UltraFlo technology demonstrates high flow performance. Used widely in the Scandinavian market. Especially suitable for use with liquid and ga-seous media in the industrial area.
AdvantagesSingle handed operation. Extremely high flow performance.
Working Temperature*-20°C up to +100°C (NBR)
*At a temperature below-20°C and above +100°C specialseals are available on request.
Technical Description
Air
Chart
Pres
sure
Dro
p (b
ar)
Flow Rate in l/min
TEMA Series
NBR
NBR23 69 27 13R 1/2
Female Thread
G 3/8 23 65 27 10 Standard
Standard
1800 E
1800 EB
NBR
NBR25 65 27 10G 1/2
Standard 1800 EFNBR27 73 27 15R 3/4
10 mm 23 82 27 23 Standard
Standard
1800 EK10
1800 EK12
NBR
NBR23 82 27 2413 mm
Standard 1800 EK16NBR23 82 27 2419 mm
Standard 1800 EK19NBR23 82 27 2419 mm
Standard 1800 ECNBR30 67 27 11G 3/4
Hose Barb
Plug Profile 1:1
23
TEM
A Lo
wpr
essu
reBr
ass/
Stee
l
24
TEM
A Lo
wpr
essu
reBr
ass/
Stee
l
Single Shut-Off
Couplings with valve
Connection A SWmm
Lmm
Dmm
L1mm
L2mm
SW1SW1
Bmm
Seal Version Part Number
G 1 41 82 48 Standard
Standard
2100
2100 V
Female Thread
TEMA Series 2100
60 %
of a
ctua
l siz
eNominal Diameter
= 380 mm222 2100
Interchangeability
CouplingValveSleeveDistansringSpring/Locking RingLocking BallsSeals
Tema design
Working PressurePB = 20 bar, maximum static working pressure with safety factor of 4 to 1.
Material
Coupling
Plug
Plug
BrassBrassSteel, Hardened, gulpassiveradSteel, Hardened, blankpassiveradAISI 301AISI 420 CNBR
Standard
Steel, Hardened, Passivated
2100 is a product series used mainly in compressed air applications. It is best suited for large sized pneumatic systems and compressed air tools with needs for very high air flows up to 12000 litres per minute. This product has a unique safety feature which requires a twist and push/pull movement during connection/dis-connection. It has also an automatic decompressing feature to enable easy handling.
AdvantagesVery high flow performanceRobust designHigh corrosion resistanceSafety operation features
Working Temperature*-40°C up to +100°C (NBR)-25°C up to +200°C (FKM)
*At a temperature below-40°C and above +100°C specialseals are available on request.
Technical Description
AirChart
Pres
sure
Dro
p (b
ar)
Flow Rate in l/min
TEMA Series
NBR
FKM41 82 49G 1
Plug Profile 1:1
25
Plugs without valve
Connection A SW mm
Lmm
Dmm
L1mm
L2mm
SW1mm
Bmm
Gmm
Version Part Number
G 1 36 57 Standard 21210
Male Thread
TEMA Series 2100
TEM
A Lo
wpr
essu
reBr
ass/
Stee
l
Dust Protection TEMA Series 2100
230 10026
5026-QC
76
L mm D mm Material Color Part Number
Blue
Blue
19 mm 74 Standard 21019-QC
Hose Barb
PVC
170 52 PVC
25 mm 40 Standard 21025
32 mm 42 Standard 21032-QC
Coupling
Plug