Nomenclature • Dimensional Specifications - …centurykitchens.com/specifications/2017 Spec Book -...
Transcript of Nomenclature • Dimensional Specifications - …centurykitchens.com/specifications/2017 Spec Book -...
Specifications
© Century Cabinetry : 2017 Specifications Manual 4
• Nomenclature• Dimensional Specifications• Cabinet Construction
- Full Access (Frameless) - Framed - Framed (All Wood Construction) - Drawers and Pullouts - End Panel Options - Cabinet Modifications
• Terms & Policies• Warranty Information• Product Care & Cleaning• Industry Qualifications• Custom Item Form
Specifications : Nomenclature
© Century Cabinetry : 2017 Specifications Manual 5
Century's Full Item Code
Century Full item code is 17 positions long Positions 1 to 3 = Cabinet Series
Ex : GHS / CHS / VHS Positions 4 to 5 = Door Style Code
Ex : GA = Georgetown Auburn Positions 6 to 17 = 12 Position Item Code
Ex : W2130L or B15L
Wall Cabinets - Dimension and Handing Nomenclature
Width - Positions 7 - 8Height - Positions 9 - 10Depth - Positions 11 - 12
Base Cabinets - Dimension and Handing Nomenclature
Utility Cabinets - Dimension and Handing Nomenclature
Width - Positions 8 - 9Height - Positions 10 -11Depth - Positions 12 -13Handing - Position 14*If item does not have numbers in position 12 & 13the depth is 12"
W 21 30Wall
Cabinet 21" Width 30" Height
L Hinge Left W 30 18Wall
Cabinet 30" Width 18" Height
15 15" Depth
WBCWall Blind
Cabinet36" to 39"
Wall coverage from corner is 36" minimum
to 39" maximum
4242" Height
UC 18Utility Cabinet 18" Width
R Hinge Right84
84" Height
UC 18Utility Cabinet 18" Width
RHingeRight
8484"
Height
2424" Depth
For UC - Standard depth = 12"
You only note depth when it is not the standard for that type of cabinet
For Walls - Standard depth = 12". You only note depth when it is not the standard for that type of cabinet
36/39 RBlind Right
B 15Base Cabinet 15" Width
RHinge Right
CHSCabinet Series:
GHSCHSVHS
Door Style Code
W2130 LItem Code
GA Positions: 1 2 3 4 5 6 7 8 9 10 11
Positions: 6 7 8 9 10 11 12
Positions: 6 7 8 9 10 11 12 13 14
If item does not have numbers in position 11 and 12 the depth is 12"
Specifications : Dimensional Specifications
© Century Cabinetry : 2017 Specifications Manual 6
18"
61"
4" Toe Kicks
24"
61"
4" Toe Kicks
UC, OC WD _ _ 48 W _ _ 42 W _ _ 30 W _ _ 24 W _ _ 18 W _ _ 15 W _ _ 12
B, SB, BTC BD VBVBSVBDVBDB
VDDF / DDF AD
84"
5-3/8"
48" 417/8" 309/16" 15"235/8" 18" 12"
Base Unit Heights:
Wall Unit Heights:
UC, OC WD _ _ 54 W _ _ 36 W _ _ 30 W _ _ 24 W _ _ 18 W _ _ 15 W _ _ 12
B, SB, BTC BT9BT6BPO
BD VBVBSVBDVBDB
VDDF / DDF AD
90"
5-3/8"
54" 309/16" 15"235/8" 18" 12"
Elevations for an 84"High Space
Elevations for a 90"High Space
BT9BT6BPO
30" 33" 36"
36" 39"18"
23 7/16" 30 3/8" 42"
177/16"
61/8"
243/8"
36"
291/2"341/2" 341/2" 341/2" 341/2" 341/2"
291/2"341/2" 341/2" 341/2" 341/2" 341/2"
Wall Unit Heights:
Base Unit Heights:
B4D
W _ _ 36
12"
36"
W _ _ 42
417/8"
341/2"
B4D
341/2"
12 1/8"
6"
23 5/8"
11"
11"
6"
30 9/16"30 9/16"6"
6"
6"
9"
11"
6"
11"
6"
23 5/8"
11"
11"
6"
30 9/16"30 9/16"6"
6"
6"
9"
11"
6"
11"
Specifications : Dimensional Specifications
© Century Cabinetry : 2017 Specifications Manual 7
30"
61"
4" Toe Kicks
L LL L
L
L L
LLL
Designates Center Door Hinging
BECDF36 L
LLLL
52°
38°
38°38°
52° 52°
38°
38°38°
52°52°
38°
52°
52°
38°9.5°
26.5°
28 °
28 °
Plan of Angled Cabinets to help you select the proper handing (L/R)
UC, OC WD _ _ 60 W _ _ 42 W _ _ 30 W _ _ 24 W _ _ 18 W _ _ 15 W _ _ 12
B, SB, BTC BT9BT6BPO
BD VBVBSVBDVBDB
VDDF / DDF AD
96"
5-3/8"
60" 417/8" 309/16" 15"235/8" 18" 12"
Base Unit Heights:
Wall Unit Heights:
Elevations for a 96"High Space
42" 45"18 1/8"
29 7/16" 36 3/8" 48"
291/2"341/2" 341/2" 341/2" 341/2" 341/2"
W _ _ 36
24"
36"
B4D
341/2"
6"
23 5/8"
11"
11"
6"
30 9/16"30 9/16"6"
6"
6"
9"
11"
6"
11"
90°
90° 90°
90°
90°
90° 90°
90°
Specifications : Cabinet Construction - Full Access (Frameless)
© Century Cabinetry : 2017 Specifications Manual 8
Backs• 5.5 mm thick fiberex* painted natural maple wood-grain
Finished End Panels• 5/8" thick furniture-board laminated low pressure laminate• Exposed ends match door color• Front is edge-banded to match door color• Drilled to receive 8mm wood-dowels (top and bottom)• Interiors are Natural Maple wood grain laminate
Tops & Bottoms• 5/8" thick furniture board laminated low pressure laminate• Front Edge has horizontal face frame rail attached (1 7/8" high.)
The Following Cabinets Are Full Access (Frameless) Construction:Oven Cabinets (OC) Base Lazy Susans (BLS) Base Pullout (BPO6)Pantries and Utilities (UC) Base Corner Susans (BCS) Apron Drawers (AD)Utility End Corners (UEC) Base End Corner (BEC) Desk Files (DF and DDF)Wall End Corner (WEC) Base Corner (BC) Vanity Linen (VL)Wall Blind End Corner (WBEC) Base End Corner Double Face (BECDF36) Wine Rack Diagonal (WRD)Lift-Up Door Appliance Garage (BLUM)
***Fiberex is a High Density Fiberboard (HDF) reinforced panel set into end panels, secured with adhesive and clamped under pressure, ensuring square construction. ***
Specifications: Cabinet Construction - Framed
© Century Cabinetry : 2017 Specifications Manual 9
Face Frames• 3/4" thick solid wood stiles and rails; joined with pocket screws• Stiles are 1 1/8" wide; inside edge is beaded and outside edge radiused• Rails are 1 7/8" wide inside edge is beaded and outside edge radiused
Backs• 5.5 mm thick fiberex* painted natural maple wood-grain
End Panels• Unexposed end panels are 3/8" thick furniture-board; recessed a 1/4" from outside edge of face frame.• Exterior face of end panel is laminated with a low pressure laminate.• Interior face of end panel is laminated with a low pressure laminate.
• Exposed end panels are 5/8" thick furniture-board; flush with outside edge of face frame.• Exterior face of end panel is laminated low pressure laminate in the matching door color.• Interior face of end panel is laminated low pressure laminate in Natural Maple wood grain.
• Tops and bottoms are edge-banded in Natural Maple wood grain laminate.
Tops & BottomsWall Cabinets• 3/8" thick furniture-board low pressure laminate with Natural Maple wood-grain on both sides.• Dadoed and glued into the end panels and face-frame.
Base Cabinets• Bottoms -- 3/8" thick furniture-board with low pressure laminate.• Dadoed and glued into the end panels and face frame.• Tops -- 3/8" Thick Plywood I-Beam Construction
Toekicks• Separately constructed; then glued and stapled to the cabinet.• Constructed of 5/8" thick MDF.• On finished cabinet ends, the toekick is recessed in 2".• TKC8 must be ordered to give a seamless finish in field.
ShelvesCarriage and Vassar House Series• 3/4" thick furniture-board laminated low pressure laminate; with beaded wood edge. **Bradford, Coventry & Manchester Door Styles Use Gatehouse Shelf**
Gatehouse• 3/4" thick furniture-board laminated low pressure laminate; with PVC edge-banding.
***Fiberex is a High Density Fiberboard (HDF) reinforced panel set into end panels, secured with adhesive and clamped under pressure, ensuring square construction. ***
Specifications: Cabinet Construction - Framed (All Wood Construction)
© Century Cabinetry : 2017 Specifications Manual 10
Face Frames• 3/4" thick solid wood stiles and rails; joined with pocket screws.• Stiles are 1 1/8" wide; inside edge is beaded and outside edge radiused.• Rails are 1 7/8" wide inside edge is beaded and outside edge radiused.
Backs• 5.5 mm thick plywood prefinished wood veneer.
End Panels (Carriage House & Vassar House)• Unexposed end panels are 1/2" thick plywood; recessed a 1/8" from outside edge of face frame.• Exterior face of end panel is laminated with a wood veneer.• Interior face of end panel is laminated with a prefinished wood veneer.
• Exposed end panels are 5/8" thick plywood; flush with outside edge of face frame. • Exterior face of end panel is laminated with a wood veneer in the matching door color.• Interior face of end panel is laminated with a wood veneer.
***NOTE : Bradford, Coventry & Manchester Door Styles use Gatehouse Specifications***
End Panels (Gatehouse)• Unexposed end panels are 1/2" thick plywood; recessed a 1/8" from outside edge of face frame.• Exterior face of end panel is laminated with a wood veneer.• Interior face of end panel is laminated with a prefinished wood veneer.
• Exposed end panels are 1/2" thick plywood; recessed a 1/8" from outside edge of face frame. • Exterior face of end panel is laminated with a wood veneer in the matching door color.• Interior face of end panel is laminated with a wood veneer.
Tops & BottomsWall Cabinets• 3/8" thick plywood laminated with a prefinished wood veneer on both sides.• Dadoed and glued into the end panels and face-frame.
Base Cabinets• Bottoms -- 3/8" thick plywood prefinished wood veneer.• Dadoed and glued into the end panels and face frame.• Tops -- 3/8" thick plywood I-Beam Construction.
Toekicks• Separately constructed; then glued and stapled to the cabinet.• Constructed of 5/8" thick plywood.• On finished cabinet ends, the toekick is recessed in 2".• TKC8 must be ordered to give a seamless finish in field.
ShelvesCarriage and Vassar House Series• 3/4" thick plywood laminated with a prefinished wood veneer on both sides; with beaded wood edge. **Bradford, Coventry & Manchester Door Styles Use Gatehouse Shelf**
Gatehouse• 3/4" thick plywood laminated with a prefinished wood veneer; with prefinished veneer edge banding.
Specifications: Cabinet Construction - Drawers and Pullouts
© Century Cabinetry : 2017 Specifications Manual 11
**Bradford, Coventry & Manchester Door Styles use Gatehouse Drawer Features**
BASE CABINET 21" Deep 21" Deep 21" DeepTop Drawer 5/8" Thick Plywood Sides / 1/4" Plywood Bottom 3/4" Thick Dovetail - Plywood Sides 3/4" Thick Dovetail - Plywood Sides
3/4" Extension Side Mount Glides Full Extension Undermount Soft Close Glides Full Extension Undermount Soft Close Glides
UPGRADE OPTION ONLY3/4" Thick Dovetail (Front Only) - Plywood SidesFull Access Undermount Sift Close Glides
BASE CABINET 21" Deep 21" Deep 21" DeepDeep Drawers 5/8" Thick Plywood Sides / 1/4" Plywood Bottom 3/4" Thick Dovetail - Plywood Sides 3/4" Thick Dovetail - Plywood Sides
3/4" Extension Side Mount Glides Full Extension Undermount Soft Close Glides Full Extension Undermount Soft Close Glides
UPGRADE OPTION ONLY3/4" Thick Dovetail (Front Only) - Plywood SidesFull Access Undermount Sift Close Glides
VANITY CABINET 18" Deep 18" Deep 18" DeepTop Drawer 5/8" Thick Plywood Sides / 1/4" Plywood Bottom 3/4" Thick Dovetail - Plywood Sides 3/4" Thick Dovetail - Plywood Sides
3/4" Extension Side Mount Glides Full Extension Undermount Soft Close Glides Full Extension Undermount Soft Close Glides
UPGRADE OPTION ONLY3/4" Thick Dovetail (Front Only) - Plywood SidesFull Access Undermount Sift Close Glides
VANITY CABINET 18" Deep 18" Deep 18" DeepDeep Drawers 5/8" Thick Plywood Sides / 1/4" Plywood Bottom 3/4" Thick Dovetail - Plywood Sides 3/4" Thick Dovetail - Plywood Sides
3/4" Extension Side Mount Glides Full Extension Undermount Soft Close Glides Full Extension Undermount Soft Close Glides
UPGRADE OPTION ONLY3/4" Thick Dovetail (Front Only) - Plywood SidesFull Access Undermount Sift Close Glides
DESK FILE 18" Deep 18" Deep 18" DeepTop Drawer 5/8" Thick Plywood Sides / 1/4" Plywood Bottom 3/4" Thick Dovetail - Plywood Sides 3/4" Thick Dovetail - Plywood Sides
3/4" Extension Side Mount Glides Full Extension Undermount Soft Close Glides Full Extension Undermount Soft Close Glides
UPGRADE OPTION ONLY3/4" Thick Dovetail (Front Only) - Plywood SidesFull Access Undermount Sift Close Glides
DESK FILE 20" Deep 20" Deep 20" DeepDeep Drawers 5/8" Thick Plywood Sides / 1/4" Plywood Bottom 3/4" Thick Dovetail - Plywood Sides 3/4" Thick Dovetail - Plywood Sides
Full Extension Undermount Glides Full Extension Undermount Soft Close Glides Full Extension Undermount Soft Close Glides
UPGRADE OPTION ONLY3/4" Thick Dovetail (Front Only) - Plywood SidesFull Access Undermount Sift Close Glides
OVEN CABINET 21" Deep 21" Deep 21" Deep5/8" Thick Plywood Sides / 1/4" Plywood Bottom 3/4" Thick Dovetail - Plywood Sides 3/4" Thick Dovetail - Plywood Sides3/4" Extension Side Mount Glides Full Extension Undermount Soft Close Glides Full Extension Undermount Soft Close Glides
PULL OUT TRAYS UPGRADE OPTION ONLY 21" Deep (Non-Dovetailed) 21" Deep21" Deep (Non-Dovetailed) 5/8" Thick Plywood Sides 3/4" Thick Dovetail - Plywood Sides5/8" Thick Plywood Sides 3/4" Thick Front Full Access Undermount Soft Close Glides3/4" Thick Front 3/4" Extension Side Mount Glides3/4" Extension Side Mount Glides
UPGRADE OPTION ONLY21" Deep3/4" Thick Dovetail - Plywood Sides Full Access Undermount Soft Close Glides
DRAWER FEATURES VASSAR HOUSECARRIAGE HOUSEGATEHOUSE
Specifications: Cabinet Construction - End Panel Options
© Century Cabinetry : 2017 Specifications Manual 12
• Unfinished 3/8" furniture grade particle board with white low pressure laminate on exterior and natural maple low pressure laminate on interior.
• Finished ends are 5/8" thick, constructed with matching veneer or low pressure laminate panels. The end panel is flush with the faceframe.
VR Finish Right Side VL Finish Left Side VV Finish Both Sides [No designation] - both sides are unfinished
*The following cabinets come standard with unfinished ends and cannot be ordered with finished end option.
BEC24 L/R BC1824 L/R UEC84 L/RBEC36 L/R BC2424 L/R UEC90 L/RBCS33 L/R BLS33 L/R UEC96 L/RBCS36 L/R BLS36 L/R BC45
Special Note for Finished Ends on Tall Cabinets
• For Black painted, the unfinished end will be a white panel, with edge-banding to to match cabinet color on the front exposed edge of the panel.
• For Distressed Chestnut, the unfinished side will be a Spice Cherry panel with Distressed Chestnut edge-banding on the front exposed edge of the panel.
• If any part of the end panel will be visible on the utility, oven, or linen cabinet, you must designate a finished end for that side.
• Unexposed ends are 1/2" thick; exterior is unfinished and interior is finished in natural maple
• Exposed ends are 1/2" for GHS, 5/8" thick for CHS and VHS, exterior is finished in matching wood veneer and interior is finished in natural maple.
• All exposed ends must be tagged with VR / VL / VV (Finished End Code)
• Each item on your order must be tagged with the manufacture code PLY to receive the Plywood End Option.
• End Panel Doors (EPDR) are optional decorative doors that can be applied to the cabinet ends to create a more finished look. They are wider than standard doors and made to meet the side edge of the doors on the front of the cabinet and cover the face frame.
• All exposed ends must be tagged with VR / VL / VV (Finished End Code)
• Order the appropriate sized End Panel Door (EPDR) code as a separate line item
See pages 127-128 for the End Panel Door (EPDR) Sizes and Specifications
Century does not finish the sides of the cabinets unless specified by the customer. Therefore, when ordering product, you MUST designate all finished ends, and these are an additional charge.
Standard End
Finished End
Plywood End Options
End Panel Door (EPDR)
Specifications : Cabinet Construction - Cabinet Modification Options
© Century Cabinetry : 2017 Specifications Manual 13
Cabinet Construction Modifications
Code Description
Box with Components BOX Cabinet will ship with everything except Doors, drawer heads, and hinges
Box Only 364 Cabinet shipped without doors, drawerheads, drawers, pullouts, shelves, glides, or hinges.
Box Only, Beaded Back BOB Same as Box Only (364), but cabinet will be made with finished bead board backOnly available on cabinets that have finished interiors.Note: Not available on angled cabinets !!
All Wood Box AWB Tops/Bottoms/Ends/Backs/Shelves all made of furniture grade plywood**Must tag ALL items with AWB code except: PBB34 and PBB42 which are not offered in plywood construction
Plywood Sides PLY End Panels are made of furniture grade plywood*Must still designate finished endsNote: Not available in Vassar House Series!!
Cabinet Component Modifications
Beaded Back BB Cabinet made with Bead Board Back instead of standard finished backOnly available on cabinets that have finished interiors.Note: Not available on angled cabinets !!
Toekick Add-On TKA Toekick assembly Installed on the bottom of the cabinet box
Tall Tray Dividers TTD Vertical Dividers installed in top opening of 96" high cabinetry.Note: Not available in Gatehouse Series!!
Specifications : Cabinet Construction - Cabinet Modification Options
© Century Cabinetry : 2017 Specifications Manual 14
Drawer Core Modification OptionsCode Description
Dovetail Drawer/Full Access Soft Close Glides DTG Dovetail Drawer (Front Only) with Full Access Soft Close Glides (Gatehouse Series only)
Gatehouse Pullout GPO 21" Deep Pullout in lieu of half shelf in base cabinets (Gatehouse Series only) Middle position only
Double Tiered Cutlery Trays DTC Pre-Installed Double Tiered Cutlery Trays Not Offered in Gatehouse Series
Door Modification Options
Soft Close Door Hinges SCH Upgrade standard door hinges to Soft CloseAvailable in Gatehouse Series.
Seeded Glass Upgrade SGL Replaces flat glass on standard mullion & glass cabinetry with Seeded Glass.*Available on WG/WM/WMR Cabinets
Beveled Glass Upgrade BGL Replaces flat glass on select size standard glass cabinetry with Beveled glass.*Available on select size WG Cabinets
No Glass NGL Door will be manufactured without the bevel glass or flat glass*Available on WG/WM/WMR Cabinets
Door Modifiers - Not Chargeable
Door Panel PN Door to be used as a Panel*Not drilled for hinges, Finished on the back
Left Hand 2 Hinge Drillings L2 Left Handed Door - 2 hinge Drillings
Left Hand 3 Hinge Drillings L3 Left Handed Door - 3 hinge Drillings
Right Hand 2 Hinge Drillings R2 Right Handed Door - 2 hinge Drillings
Right Hand 3 Hinge Drillings R3 Right Handed Door - 3 hinge Drillings
Cabinet to Door CD Use this code only when ordering door for BLS or BCSThis denotes the door that attaches to the cabinet frame
Door To Door DD Use this code only when ordering door for BLS or BCSThis denotes the door that attaches to the other door
Specifications : Terms & Policies
© Century Cabinetry : 2017 Specifications Manual 15
LEAD TIMES/CHANGE ORDERS/CANCELLATIONS
TERMS AND CONDITIONS OF SALE
STANDARD ORDERS (4 week lead times) - Century provides a two (2) day time period from date of order acknowledgement to change/cancel order. After that time, the order is released and locked into production. Changes or cancellation of the order will result in a 25% charge for work in progress during week 1, 50% charge during week 2, 100% charge during weeks 3-4
SHORT-LEAD WAIVER (3 week lead times) - Century provides zero (0) day time period from date of order acknowledgement to change/cancel the order. The order is immediately processed and locked into production. Changes or cancellation of the order will result in a 50% charge for work in progress during week 1, 100% charge during weeks 2-3.
1) 50% DEPOSIT is required to process all orders for C.I.A. (Cash In Advance) customers. Century accepts bank checks, personal checks, and most major credit cards. Century will not hold or accept post dated checks. $50 service charge will be applied for checks returned from bank for Non-Sufficient Funds. Balance is due 5 BUSINESS DAYS prior to delivery. If not paid, delivery will be cancelled and not re-scheduled until balance is paid in full.
2) Installation and adjustment of merchandise is the responsibility of the customer.
9) Century Cabinetry has a 10-year limited warranty, effective as of 4/1/12. Century Cabinetry will repair or replace any material that proves defective. Claims for labor installation cost will NOT be accepted.
3) Ship date on order acknowledgement is TENTATIVE. Customer will be advised of ship date approximately 1 week prior to the date on the order. Material held after 30 days from ship date will be disposed of and deposit forfeited or a storage fee of $50 per week will be added to the balance.
4) Delivery must be cancelled by 9am the day before delivery or a charge of $100 will be applied to deliver cabinets on the next scheduled day.
5) Customer or authorized representative must be present at delivery site to sign for merchandise. Deliveries unable to be made will incur an additional $100 charge and applied to re-scheduled delivery.
6) It is the buyers responsibility, at time of delivery, to verify quantities received, inspect cartons for visible damage, sign and date shipping tickets.
7) Claims for shortages, errors, and damages must be noted on shipping ticket at time of delivery. Concealed damages must be reported to your Century Sales Representative/Administrator within 1 week of shipment.
8) Cabinetry is NOT RETURNABLE unless defective. Defective items need to be returned within 30 days of delivery uninstalled and in original box. Stocked accessories may be returned with a 35% re-stocking fee. Returned accessories must be in good condition or no credit will be issued.
Specifications : Warranty Information
© Century Cabinetry : 2017 Specifications Manual 16
Century Cabinetry, Inc. warrants its products to be free from defects in material or workmanship under normal use for a period of 10 years from date of purchase by the original consumer purchaser and is not transferrable to subsequent homeowners. Should defects in material or workmanship arise during this warranty period, Century Cabinetry, Inc. will replace or repair, at its discretion, the defective cabinet, material or component.
This warranty does not cover products that are misused, abused, neglected, modified, improperly stored, incorrectly installed, or subjected to extremes in moisture or temperature.
This warranty covers only parts and materials of the products manufactured by Century Cabinetry, Inc.. Not covered under this warranty are countertops, appliances, plumbing fixtures, etc or the costs (including labor) to remove or re-install materials or related items such as plumbing fixtures, countertops, appliances…
Wood Disclaimer
Finishes/Glazes/Distressing Variations in Century Cabinetry's hand applied finishes and glazes are what give each piece its distinctive look and these variations are not considered to be defects in material or workmanship.
Changes to Finishes or Product Design Century Cabinetry may modify product due to supplier availability and as changes or improvements are implemented, but is under no obligation to make these changes to previously manufactured product. If a warranty claim is filed after a product or finish becomes obsolete, Century Cabinetry reserves the right to honor the warranty in the following ways: a. To replace the affected component with a new component of the same style b. To replace the affected component with any other component(s) to achieve a similar appearance with a style that is comparable in appearance, color, design or construction based upon current product offerings. If components are replaced, Century Cabinetry cannot guarantee that the finish of these items will be an exact match to the finish and appearance of the original purchased components. Implied Warranties This warranty is only valid in the United States of America. To the extent permitted by law, any implied warranties, including the implied warranties of merchantability and fitness for a particular purpose, are limited to the duration of this express warranty. This warranty excludes any incidental or consequential damages. Some states do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you.
Making a Claim To make a claim under this warranty, the purchaser must contact their local Century dealer or distributor and report said defects. If you have difficulty obtaining assistance write to: Century Cabinetry Inc. 220 Phillips Road Exton, PA 19341. Attn: Customer Warranty/Service Department. To ensure timely processing, please include your name, phone number, builder or contractor name, lot number, address, city, state, and zip code.
Warranty Effective Date This warranty is effective as of April 1, 2012 and covers all cabinets ordered on or after this date. Cabinets ordered before April 1, 2012 are covered under the preceding FIVE-YEAR warranty.
THIS WARRANTY IS THE EXCLUSIVE WARRANTY OF CENTURY CABINETRY AND IS IN LIEU OF ALL OTHER WARRANTIES, EITHER EXPRESSED OR IMPLIED. IN NO EVENT SHALL CENTURY CABINETRY BE LIABLE FOR CONSEQUENTIAL, INDIRECT OR INCIDENTAL DAMAGES RESULTING FROM THE INSTALLATION, USE OR FAILURE OF ITS PRODUCT.
10 Year Limited Warranty
Variations in color and grain are a natural characteristic of wood. Changes in color on finished wood products can occur due to exposure to light and other environmental factors. These variations and color changes are not deemed defective and therefore are not covered under this warranty.
Specifications : Product Care & Cleaning
© Century Cabinetry : 2017 Specifications Manual 17
The solid wood and wood veneer components used in the manufacture of your cabinets are finished with aWater-Based UV Finish, which will hold up to continuous use for many years. The materials used in the finishingprocess are especially designed to meet the most stringent industry performance standards for resistance to moisture, grease, soap, detergents, and food stains. The following guidelines and suggestions should help keepyour cabinetry looking beautiful for many years.
General Cleaning and Care of Wood CabinetsRemove any oil, grease, or soil, using a clean damp cloth of mild soap and water. Rinse with a clean damp cloth.Dry throughly with a soft lint-free cloth. DO NOT use steel wool, soap pads, polishing wax or cleaners containing bleach, ammonia, harsh detergents, and abrasives. All of these can remove the factory-applied finish and thus void warranty.
Routine cleaning can help prevent permanent damage from build up of grease and smoke.
Excess moisture can also damage cabinets. The most common areas for moisture build-up are around the sink,range, dishwasher, oven, and baseboard. Immediately dry surfaces with a clean cloth.
Over time cabinet finish may either darken or lighten depending upon lighting. This is normal.
To repair nicks and scratchesUse a matching TUK (Touch up Stick- Kit) which is designed to match the cabinet finish. A touchup stick should havebeen included with your cabinets. If you do not have one, please contact your Century Cabinetry dealer. If scratches ornicks are still visible after using the touch up stick, a touch up marker can be supplied. Rub the soft fill stick over the scratched area and wipe away the excess with a clean soft cloth. Never use sand paperor any other material to even out a scratch, as it will damage the finish.
Care of Cabinet InteriorsCentury Cabinetry's shelves are made of low pressure laminate which is a material that is resistant to scratches, stains, and water penetration
To remove food residue or grease, use any common dishwashing liquid (not detergent) or a solution of mild soap and water. Wipe clean with a clean soft damp cloth and dry thoroughly. Wipe up spills and dry immediately.
Self-Cleaning OvensSelf-cleaning ovens are cleaned through the use of intense heat. If the heat gasket does not seal properly, heat may escape from the oven. Cabinet components installed near the oven may suffer finish or surface damage. To minimize risk of damage during cleaning cycles, we recommend that you remove doors and drawers from cabinets that are above and adjacent to a self-cleaning oven.
Care & Cleaning Guidelines
Specifications : Industry Qualifications
© Century Cabinetry : 2017 Specifications Manual 18
Century Cabinetry is committed to conducting our business in an environmentally responsible manner. Our commitmentto environmental awareness and preservation is reflected throughout our business. Century's cabinetry is manufacturedusing environmentally friendly practices.
Century Cabinetry has been certified by the Kitchen Cabinet Manufacturers Association (KCMA) as meeting thestandards for their Environmental Stewardship Program (ESP). Our organization is committed to meeting andfurther exceeding the standards as set forth by the leaders in our industry. Visit WWW.KCMA.ORG for more information.
California Air Resources Board (CARB) continues in the development of innovative air pollution control strategies.CARB II is the toughest standard in the world for formaldehyde emission levels from composite wood panels. CenturyCabinetry products are CARB II compliant. Visit WWW.ARB.CA.GOV for more information.
In 2008, Century completed a Finishing System Modernization program committed to environmentally safe processes.Stains and Finishes were converted to Water-Base UV thereby virtually eliminating hazardous air pollutants (HAPS)and off-gassing odors and greatly reducing volatile organic compounds (VOC). Material is also formulated without heavymetals and are formaldehyde free. These standards provide a healthy product for your home while protecting andconserving our land and natural resources.
LEED is a nationally accepted benchmark for the design, construction and operation of high-performance greenbuildings. The LEED certification program is run under the guidance of the US Green Building Council (USGBC).Please visit WWW.USGBC.ORG for more information. Century Cabinetry can provide cabinets to fulfill most of yourLEED project requirements.
KCMA Certified
CARB II Compliant
WATER BASE UV Finishing
LEADERSHIP IN ENERGY ENVIRONMENTAL DESIGN (LEED)
Specifications : Custom Item Form
© Century Cabinetry : 2017 Specifications Manual 19