NO STABILISING SOLUTION OR PVA REQUIRED* · touprelith® f masonry repair filler • sacs de 5 kg...
1
TOUPRELITH ® F MASONRY REPAIR FILLER • Sacs de 5 kg et 15 kg. FILL AND REPAIR WITHOUT FORMWORK ADHERES ON DAMP MASONRY WILL NOT FLASH OR GRIN NO STABILISING SOLUTION OR PVA REQUIRED* ▼ ▼ ▼ EASY TO SHAPE USE AND STORAGE CONDITIONS RECOMMENDATIONS and care for use NORMATIVE DOCUMENTS to be referred to Physical and technical FEATURES OVERCOATING PURPOSE SUBSTRATES SUBSTRATES PREPARATION PACKAGING HEALTH AND SAFETY TOUPRELITH ® F uses on all rough masonry surfaces: • Cement, concrete, • Breeze blocks, • Bricks, • Stones. Repair Filler in powder, for exterior use, manual application. • Substrates to be prepared as per the current trade practices. • Substrates must be hard, cohesive, clean, sound and dry. • Box of 1.5 kg. • Bags of 5 and 15 kg. • Xi irritating. Contains cement. • Safety data sheets available on http://www.toupretpro.co.uk or on quickfds.com or toupret.com. The data sheet information, especially the guidelines relevant to the application and final use of TOUPRELITH ® F are provided in good faith and result from the knowledge of the products and experience of TOUPRET company. The product is required to be used as per the trade practices rules book and in reference to our recommendations. The information provided is relevant to applications processed under a temperature of 20°C, a hygrometry rate of 50 % and on normal-absorbent substrates. The times mentioned are only indicative and depend on the substrate, the coat thickness, and the ambient conditions. • Application tools : coating knife or with trowel or blade. • Tools cleaning: the product residues are to be rubbed off when dry. Water cleaning is unnecessary. • Preservation: product guaranteed 6 months, from the original purchase invoice date as evidence, in its original sealed packaging and stored away from humidity. • If you apply coloured paints, wait until the substrate is fully dry and make sure that colorants used are alkaline resistant. • Do not overcoat with oil borne coatings (Pliolite, etc.) unless a priming coat of waterborne masonry paint is applied first. • Do not apply TOUPRELITH ® F on polystyrene, nor on adhesive coverings. • Do not apply under a temperature < 5 °C and > 35 °C nor under an hygrometry rate over 80%. • Do not apply on warm, overheated surfaces. • Do not apply in sun exposure. • In hot and dry weather conditions, generously moisten the surface before and after coating. • The setting of the paste depends on its temperature: a high temperature will make it set quicker whereas a low temperature will make it set slower. • NFT 30-608: Coating fillers for interior works and/or exterior. • NFT 36-005: Characterization of paint products. • French DTU 59.1 (NFP 74-201): Building paint works. • French DTU 42.1 (NFP 84-404): façades renovation with polymer-based waterproofing coatings. TOUPRELITH ® F: Filler in powder made of cement, selected mineral extracts and binders. • Characterization (NFT 36-005): Family III class 4c • Codification (NFT 30-608): G 3 E 5 S 2 V 1 W 1 A 0 C 0 • Mixing rate: 35% water (hence 0.35 litre water per 1 kg powder) • Application thickness: limitless • Consumption: 1.2 kg powder allows to fill a volume of 1 litre • Working / open time: 30 minutes under 20 °C • Second coat: once fully dry • Overcoating: average 72 hours • Colour: grey • Shore hardness: 70 • pH: Alkaline • Adhesion filler/substrate (NFT 30-608): > 0,8 MPa TOUPRELITH ® F can be coated with any type of exterior filler or waterborne paint also Mineral paints, thick semi-thick plastic walls coatings and water resistant coatings. Enduits de peinture - NF 446 TOUPRET SA - 24 rue du 14 juillet - 91813 CORBEIL ESSONNES Cedex TOUPRET UK Limited - Winchester House - 259-269 Old Marylebone Road - LONDON NW1 5RA Phone : 020 7170 4165 - Fax : 020 7170 4164 - Email : [email protected] *On hard, cohesive, clean and sound substrates. ▼ FT_touprelith_UK_A4.indd 1 29/04/14 17:35
Transcript of NO STABILISING SOLUTION OR PVA REQUIRED* · touprelith® f masonry repair filler • sacs de 5 kg...
TOUPRELITH® FMASONRY REPAIR FILLER
• Sacs de 5 kg et 15 kg.
FILL AND REPAIR WITHOUT FORMWORKADHERES ON DAMP MASONRYWILL NOT FLASH OR GRINNO STABILISING SOLUTION OR PVA REQUIRED*
▼▼
▼
EASYTO SHAPE
USE AND STORAGE CONDITIONS
RECOMMENDATIONS and care for use
NORMATIVE DOCUMENTS to be referred to
Physical and technical FEATURES
OVERCOATING
PURPOSE
SUBSTRATES
SUBSTRATES PREPARATION
PACKAGING
HEALTH AND SAFETY
TOUPRELITH® F uses on all rough masonry surfaces: • Cement, concrete, • Breeze blocks, • Bricks, • Stones.
Repair Filler in powder, for exterior use, manual application.
• Substrates to be prepared as per the current trade practices. • Substrates must be hard, cohesive, clean, sound and dry.
• Box of 1.5 kg.• Bags of 5 and 15 kg.
• Xi irritating. Contains cement.• Safety data sheets available on http://www.toupretpro.co.uk
or on quickfds.com or toupret.com.
The data sheet information, especially the guidelines relevant to the application and fi nal use of TOUPRELITH® F are provided in good faith and result from the knowledge of the products and experience of TOUPRET company. The product is required to be used as per the trade practices rules book and in reference to our recommendations.The information provided is relevant to applications processed under a temperature of 20°C, a hygrometry rate of 50 % and on normal-absorbent substrates.The times mentioned are only indicative and depend on the substrate, the coat thickness, and the ambient conditions.
• Application tools : coating knife or with trowel or blade.• Tools cleaning: the product residues are to be rubbed off when
dry. Water cleaning is unnecessary.• Preservation: product guaranteed 6 months, from the original
purchase invoice date as evidence, in its original sealed packaging and stored away from humidity.
• If you apply coloured paints, wait until the substrate is fully dry and make sure that colorants used are alkaline resistant.
• Do not overcoat with oil borne coatings (Pliolite, etc.) unless a priming coat of waterborne masonry paint is applied fi rst.
• Do not apply TOUPRELITH® F on polystyrene, nor on adhesive coverings.
• Do not apply under a temperature < 5 °C and > 35 °C nor under an hygrometry rate over 80%.
• Do not apply on warm, overheated surfaces.• Do not apply in sun exposure.• In hot and dry weather conditions, generously moisten the
surface before and after coating.• The setting of the paste depends on its temperature: a high
temperature will make it set quicker whereas a low temperature will make it set slower.
• NFT 30-608: Coating fi llers for interior works and/or exterior.• NFT 36-005: Characterization of paint products.• French DTU 59.1 (NFP 74-201): Building paint works.• French DTU 42.1 (NFP 84-404): façades renovation with
polymer-based waterproofi ng coatings.
TOUPRELITH® F: Filler in powder made of cement, selected mineral extracts and binders.• Characterization (NFT 36-005): Family III class 4c• Codifi cation (NFT 30-608): G3E5S2V1W1A0C0• Mixing rate: 35% water (hence 0.35 litre water per 1 kg powder)• Application thickness: limitless• Consumption: 1.2 kg powder allows to fi ll a volume of 1 litre• Working / open time: 30 minutes under 20 °C• Second coat: once fully dry• Overcoating: average 72 hours• Colour: grey• Shore hardness: 70• pH: Alkaline• Adhesion fi ller/substrate (NFT 30-608): > 0,8 MPa
TOUPRELITH® F can be coated with any type of exterior fi ller or waterborne paint also Mineral paints, thick semi-thick plastic walls coatings and water resistant coatings.
TOUPRELITH® FMASONRY REPAIR FILLER
ADHERES ON DAMP MASONRYADHERES ON DAMP MASONRYWILL NOT FLASH OR GRINNO STABILISING SOLUTION NO STABILISING SOLUTION OR PVA REQUIRED*
EASYEASYTO SHAPETO SHAPE
RECOMMENDATIONS and care for use
Repair Filler in powder, for exterior use, manual application.
Enduits de peinture - NF 446www.ecolabels.fr
TOUP
RET
SA -
24 ru
e du
14
juill
et -
9181
3 CO
RBEI
L ES
SONN
ES C
edex
TOUPRET UK Limited - Winchester House - 259-269 Old Marylebone Road - LONDON NW1 5RAPhone : 020 7170 4165 - Fax : 020 7170 4164 - Email : [email protected]
*On hard, cohesive, clean and sound substrates.
▼
FT_touprelith_UK_A4.indd 1 29/04/14 17:35
