NITTO KOHKI Co,.LTD. Headquarters Machine Tools...

JQA-2042 NITTO KOHKI Co,.LTD.Machine Tools Division

ISO 9001

JQA-EM4057NITTO KOHKI Co,.LTD.

HeadquartersResearch Center

ISO 14001

Cat No. Tk083g

NITTO KOHKI CO.,LTD.

NEEDLE SCALER

JET CHISELAIR HAMMER

AUTO CHISELPNEUMATIC SCALER

SUPER KELENPNEUMATIC CHIPPING HAMMER

AIR CHIPPERPNEUMATIC GRINDER

MYTONPNEUMATIC DIE GRINDER

AIR SONICPNEUMATIC HAND DRILL

AIR DRILLPNEUMATIC BELT SANDER

BELTONPNEUMATIC DUST-FREE SANDER

ORBITAL SANDERPNEUMATIC COMPACT SANDER

PALM ORBITAL SANDERHANDY PNEUMATIC SANDER

FREE SANDERPNEUMATIC RECIPROCATING SANDER

LINE SANDERPORTABLE PRECISION FINISHING FILE

SUPER HANDPORTABLE FINE FINISHING FILE

MICRO AIR HANDPNEUMATIC HACKSAW

SUPER SAWPORTABLE CHAMFERING TOOLS

BEVELERPNEUMATIC RADIAL CHAMFERING TOOL

CIRCUIT BEVELER

Whether you just glance through thisbooklet or give it an intensive reading, weare sure you'll agree that NITTO KOHKI'sportable hydraulic and electric machines,couplings and pneumatic hand tools areamong the finest precision engineeredequipment to be found today.

HI CUPLA Series

delvo, Spring Balancer,Linear Motor Driven Free Piston System

Machine Tools

NOTES ON USING TOOLS – Important Safety Instructions

Page

3-4

5-6

7

8

9-10

11-12

12

13-14

14

15

16

17

18

19

19

20-21

22

23

24

25

26

Pneumatic & Electric Power Tools,Labor-saving plus Improved Work Efficiency!

Manufacturing

Various peening works

Rivet calking, bushinserting & removing

-

-

Sanding, grinding,chamfering, finishing

Metal working,surface smoothing

Trimming, chamferingcorner rounding

Smoothing,intermediate finishsanding

Smoothing,intermediate finishsanding

Surface sanding,rust & stain removal

Plane sanding,groove sanding

Precision filing offlash, chamfering,sanding, groovefinishing

Cuts with small radii

Various drilling works

Chamfering of diesand machine

Chamfering of largeworkplaces of diesand machines

Paint & rust scaling

Sheet metal cutting,paint chiseling, rivetpunching

-

-

-

Chamfering, roughgrinding, moldgrinding

Various grindingworks

Spot smoothing,surface regulation,finish sanding

Surface smoothingof steel products,finishing of pressedproducts

Surface smoothingof steel products,finishing of pressedproducts

Spot smoothing,corner rounding,surface smoothing

Spot smoothing,surface regulation

Trimming, filing innarrow space,surface regulation

To cut mild steelplates, aluminum,plastics and othermaterials

Various drilling works

-

Chamfering of steelplate

Spatter, chips &sludge scaling

Flux chiseling,plaster chiseling

Spatter, sludge andrust chiseling, scaling

-

Bead grinding, crosssection grinding

Bead grinding

Bead grinding, rustremoval, chamfering,section finishing

Surface sanding ofpre-welded part

Surface sanding ofpre-welded part

-

-

-

Finish filing

-

Initial boring for gascutting by welder

-

Surface Chamfering ofshape steel pre-welded

-

-

Paint chiseling

Paint chiseling

Paint chipping

Grinding of pre-painted surface,buffing

Pre-painted surfaceregulation

Rough grinding, rust& paint removal,spot smoothing

Ground work sanding

Ground work sanding

Sanding of pre-painted, plasteredsurface, water sanding

Sanding of plasteredsurface, intermediatefinish sanding

Precision filing ofpre-painted surface,sanding

-

Paint scrambling(w/attachment)


-

Sand blasting &chiseling

Trimming, sandchiseling

Black surface scaling,scaling of ingotremnant in ladle

Sand chipping

Trimming, chamfering

Mold correction,trimming

Trimming, chamfering,spatter grinding,die-cast finishing

Trimming, surfacefinishing of die-casting

Trimming, surfacefinishing of die-casting

Mold correction

Mold correction

Trimming

-

-

-

Chamfering of castmolds (HB-15B)

Rust scaling,welded-part finish

Various automotiverepair works

Removal of weeds,shells, concretechipping

Removal of weeds,shells, etc., concretechipping

Additional grinding,rust removal, surfacesmoothing

Precision grindingof parts

Welding chip grinding,finish grinding, fitting

Correction of grinding(finish works)

Correction of grinding(finish works)

Paint sanding ofautomotive body

Paint sanding ofautomotive body

Trimming, precisionsanding of parts

To cut the body plateof automotive vehiclesor shaped steel

Drilling, removal ofspot-welded parts


-

-

-

-

-

-

Grinding of pipecross section andinner surface

Grinding of pipe &equipment surfaceface section

Precision finishing

Precision finishing

Sanding of plasteredsurface, and test piecesurface

Synthetic resin sanding

Filing, superfine filingfor profile correction

Precision filing offlash, chamfering,groove finishing

Trimming Trimming, precisionsanding of parts


To cut fiber plates.To cut fiber-reinforcedplastic plates

-

-

-

-

-

-

-

Sanding

Correction grindingof molded products,rough grinding

Finish sanding offurniture, profilecorrection of plasticproducts

Precision sanding

Precision sanding

Finish sanding, curvedsurface sanding,sanding of routergroove

Rough finish sanding


-

-

Drilling

-

-

Surface coarsening ofstone and concreteproducts

Concrete breaking,chiseling of stick

Concrete chiselingfrom framework,removal of linoleumfrom floor base

Chipping of stoneproducts

Chamfering of stoneproducts, honing

Additional grindingof constructionmaterials & parts

Grinding of parts &elements, repairservices of tools

Surface sanding ofconstructed materials

Surface sanding ofconstructed materials

Sanding of stoneproducts and floormaterials

Inner surface sandingof channeled parts

Correction sanding ofmetal parts

-

-

Sash works

Chamfering of steel plate

Chamfering of columns(HB-15B)

Sheet-Metal Working Welding Painting Metal Casting &Forging

Automotive &Ship Building

Chemical Engineering Wood Working & Art Construction

CONTENTS

1 2

Powerful scaling with multi-needles

Never skip a blow, cleans and descales all jobs fast. Gets into extremely restricted areas...

An asset in any industry...de-slagging, de-sputtering welds, cleaning, castings, brick, stonework, and other materials. Jet Chisel is a prime pneumatic perfomer in each of these and other tough job areas. Maximum performance in a light-weight,minimum- size air tool, Jet Chisel delivers years of trouble-free, efficient operation. And it's a tool that gets all the way down to the surface of matters. Quick, Jet Chisel needles adjust to any surface contour automatically. They get deep into corners, all the way into uneven surfaces, all types of curvatures making it a tool no shop should be without. It's an equally efficient time-saver in ship-board applications, too.

Specifications

Standard Accessories

MPa {kgf/cm2}

m3/min

min-1

mm

inch

kg

AJC-16

0.59 {6}

0.07

6,000

2 OD x 150 (7pcs.) or 3 OD x 180 (3pcs.)

3/8

0.98

Model

Rated Air Pressure

Air Consumption (No load)

Stroke Speed

Needles to be used

Hose Size

Mass (Weight)

JT-20

0.59 {6}

0.2

4,000

2 OD x 180 (29pcs.) or 3 OD x 180 (12pcs.)

3/8

2.4

JEX-20

0.59 {6}

0.2

4,000

2 OD x 180 (29pcs.) or 3 OD x180 (12pcs.)

3/8

2.4

• Needle 3mm OD x 180 mm : 3 pcs. (Needle 3mm OD x 180 mm : 3 pcs. on the body)• Bushing PT3/8 x NPT3/8 : 1 pc.• Hose Nipple PT3/8 x 3/8 : 1 pc.



Slim TypeAJC-16Model

Popular TypeJT-20Model

NEEDLE SCALER JET CHISEL SCALING

Full Automatic SystemThe only unit of it’s kind on the marketwithout springs. This means no springsto break...no irregular power... and theadvantage of low air consumption.

JEX-20Model

Low Vibration Type

190mm245mm 244mm

JET CHISEL

3

NEEDLE SCALER JET CHISELSCALING

Electric Needle Scaler

Optional Needles

EJC-32A

Hose Size

Mass (Weight)

Model

Model


Rated Air Pressure

Specifications

Standerd Accessories

MPa {kgf/cm2}

m3/min

min-1

mm

inch

kg

Stroke Speed

Needles to be used

JC-16

0.59 {6}

0.15

4,000

2 OD x 150 (29pcs.)

3/8

1.4

JEX-24

0.59 {6}

0.27

4,000

2 OD x 180 (53pcs.) or 3 OD x 180 (23pcs.)

3/8

2.7

JEX-2800A

0.63 {6.4}

0.43

3,700

3/8

3.1

JEX-28

0.59 {6}

0.35

4,500

2 OD x 180 (66pcs.) or 3 OD x 180 (28pcs.) or 4 OD x 180 (14pcs.)

3/8

3.5

• Needle 2mm OD x 150 mm : 29 pcs. (Needle 2mm OD x 150 mm : 29 pcs. on the body)

• Bushing PT3/8 x NPT3/8 : 1 pc.• Hose Nipple PT3/8 x 3/8 : 1 pc.

• Needle 3mm OD x 180 mm : 23 pcs. on the body• 6 mm Hex. Socket Screw Key : 1 pc.• Bushing PT3/8 x NPT3/8 : 1 pc.• Hose Nipple PT3/8 x 3/8 : 1 pc.

The same excellent performance as our air tool!

Standard Accessories • Needle 3mm OD x 180 mm : 30 pcs. (15 pcs.)• 6 mm Hex. Socket Screw Key : 1 pc.


• Needle Supporter 4mm OD : 1pc. • Bushing : 1 pc. • Hose Nipple : 1 pc.


• Needle Supporter 4mmOD : 1pc. • Bushing : 1 pc. • Hose Nipple : 1 pc.

UniversalTypeJEX-24Model Heavy-duty

TypeJEX-28Model JEX-2800AModel

Operated with standard electric supply to households.Special long and slim barrel design suitable for narrow corners.Double-insulated motor does not need grounding.Free subhandle position best fit to your working situation.

PN Part Name Q'tyTA98780TA98781TA9A213TA9A214TA98782TA9A216TA9A217TA9A218TA98783TA9A220TA9A221

100 pcs.100 pcs.50 pcs.50 pcs.100 pcs.50pcs.50pcs.50pcs.50 pcs.50 pcs.50 pcs.

Needle 2 mm OD x 150 mmNeedle 2 mm OD x 180 mmNeedle 2 mm OD x 300 mmNeedle 2 mm OD x 500 mmNeedle 3 mm OD x 180 mmNeedle 3 mm OD x 300 mmNeedle 3 mm OD x 500 mmNeedle 3 mm OD x 800 mmNeedle 4 mm OD x 180 mmNeedle 4 mm OD x 300 mmNeedle 4 mm OD x 500 mm

Specifications

W

A

minutes

min-1

mm

m

kg

115 VAC 60Hz

300

2.8

230 VAC 50Hz

300

1.4

EJC-32A

30

3,0002 OD x 180 (32 pcs.) or 3 OD x180 (15 pcs.)

5

4.5

Model

Power Supply

Rated Power Consumption

Rated Current

Rated Duty

Stroke Speed

Needles to be used

Power Cord

Mass (Weight)

JC-16Model LightweightType

158mm 237mm264mm

247mm

150mm

520mm

225mm

159mm173mm 173mm

Low-vibration Type

PN Part Name Q'ty ModelTP00338TP00337TQ05210TQ04554TP00290TP02244TP02245TP01499TP01461TP01462TP16475TP16301

1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.

JT-20,JEX-20

AJC-16

JEX-24

EJC-32A

JEX-28,JEX-2800A

JC-16

Needle Supporter 2 mm ODNeedle Supporter 3 mm ODNeedle Supporter 2 mm ODNeedle Supporter 3 mm ODNeedle Supporter 2 mm ODNeedle Supporter 2 mm ODNeedle Supporter 3 mm ODNeedle Supporter 2 mm ODNeedle Supporter 3 mm ODNeedle Supporter 4 mm ODNeedle Supporter 2 mm ODNeedle Supporter 3 mm OD

4

SCALING

A special spool valve inside gripassures excellent durability

The A-300 Auto Chisel is designed for speeding up the repair and sheet metal works of automobiles, etc. Being light and powerful, labor can be reduced remarkably. This tool enables the work to be done in narrow space where ordinary hammering work is impossible. Thus the skill usually needed in hammering work is eliminated. The respective parts employ high material and are subjected to high precision process.

Model

Model

Specifications


MPa {kgf/cm2}

m3/min

min-1

inch

kg

A-300

0.59 {6}

0.3

2,600

1/4

1.7

Model

Rated Air Pressure


Stroke Speed

Hose Size

Mass (Weight)• Bushing PT1/4 x NPT1/4 : 1 pc.• Hose Nipple PT1/4 x 1/4 : 1 pc.

A-300

Optional AttachmentsPN Part Name Q'ty PN Part Name Q'ty

TP00572TP00573TP04606TP00575TP00576TP00577TP00578TP00579TP00580TP00581TP00582TP00583

1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.

No.1001 Blank ChiselNo.1002 Flat Chisel No.1003 Sheet Metal Chisel ANo.1004 Sheet Metal Chisel B No.1005 Silencer Cutting ChiselNo.1006 Rubber Bushing Remover No.1007 Spot Weld BoosterNo.1008 Bushing ToolNo.1009 PunchNo.1010 Bushing Removing ToolNo.1011 Sheet Metal PunchNo.1012 20mm Bending Chisel

TP00584TA90051TP00586TP00585TP00589TP00590TP00591TP04995TP05244TP05775TP05801

-

1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.-

No.1013 Fork Chisel 24No.1014 Panel CrimperNo.1016 Fork Chisel 35No.1017 Fork Chisel 15No.1018 38mm ScraperNo.1019 60mm ScraperNo.1020 60mm Concave ScraperNo.1023 Sheet Metal Chisel CNo.1024 Moilpoint ChiselNo.1025 Rivet Removing PunchNo.1026 Rivet Caulking Chisel

-

185mm

160mm

AIR HAMMER AUTO CHISEL

AUTO CHISEL

5

SCALING

Applications and wide variety of optional attachmentsNo. 1001 Blank Chisel (TP00572)For a variety of sheet metal work, bending,and rivet closing jobs

No. 1002 Flat Chisel (TP00573)Puts increased efficiency into scraping,peeling spot welds, and cutting off bolts andpins

No. 1003 Sheet Metal Chisel A (TP04606)Cuts shapes in sheet metal fast

No. 1004 Sheet Metal Chisel B (TP00575)Just the chisel for cutting off sheet metal bodypanel

No. 1005 Silencer Cutting Chisel (TP00576)A quick cut-off chisel for muffler piping

No. 1006 Rubber Bushing Remover (TP00577)Helps you remove idle arm sleeves andbushings in record time

No. 1007 Spot Weld Booster (TP00578)Ideal for peeling off spot welded points andcutting off pins

No. 1008 Bushing Tool (TP00579)Puts speed and ease into the job of bushinginsertion

No. 1009 Punch (TP00580)For driving out pins and rivets, and fitting andremoving bearings and races

No. 1010 Bushing Removing Tool (TP00581)A faster servicing aid in removing bushings

No. 1011 Sheet Metal Punch (TP00582)Opens holes for bolts and rivets

No. 1012 20mm Bending Chisel (TP00583)Helps you in peening and removing slagaround welds

No. 1013 Fork Chisel 24 (TP00584)Disconnecting tie rod ends and ball joints

No. 1014 Panel Crimper (TA90051)Bending sheet metal: external body plates,doors, fenders, etc.

No. 1016 Fork Chisel 35 (TP00586)Disconnecting tie rod end ball joints


No. 1018 38mm Scraper (TP00589)Peeling paint & removing rust from iron plate


No. 1020 60mm Concave Scraper (TP00591)Removing incrustation from pipe

No. 1023 Sheet Metal Chisel C (TP04995)Cuts shapes in sheet metal fast

No. 1024 Moilpoint Chisel (TP05244)Breaking-up concrete, removing sand fromcastings

No. 1025 Rivet Removing Punch (TP05775)Removing rivets from brake lining of heavyduty cars

No. 1026 Rivet Caulking Chisel (TP05801)Caulking brake lining of heavy duty cars


6

SCALING

Applications and wide variety of optional attachmentsNo. 1001 Blank Chisel (TP00572)For a variety of sheet metal work, bending,and rivet closing jobs

No. 1002 Flat Chisel (TP00573)Puts increased efficiency into scraping,peeling spot welds, and cutting off bolts andpins

No. 1003 Sheet Metal Chisel A (TP04606)Cuts shapes in sheet metal fast

No. 1004 Sheet Metal Chisel B (TP00575)Just the chisel for cutting off sheet metal bodypanel

No. 1005 Silencer Cutting Chisel (TP00576)A quick cut-off chisel for muffler piping

No. 1006 Rubber Bushing Remover (TP00577)Helps you remove idle arm sleeves andbushings in record time

No. 1007 Spot Weld Booster (TP00578)Ideal for peeling off spot welded points andcutting off pins

No. 1008 Bushing Tool (TP00579)Puts speed and ease into the job of bushinginsertion

No. 1009 Punch (TP00580)For driving out pins and rivets, and fitting andremoving bearings and races

No. 1010 Bushing Removing Tool (TP00581)A faster servicing aid in removing bushings

No. 1011 Sheet Metal Punch (TP00582)Opens holes for bolts and rivets

No. 1012 20mm Bending Chisel (TP00583)Helps you in peening and removing slagaround welds

No. 1013 Fork Chisel 24 (TP00584)Disconnecting tie rod ends and ball joints

No. 1014 Panel Crimper (TA90051)Bending sheet metal: external body plates,doors, fenders, etc.





No. 1020 60mm Concave Scraper (TP00591)Removing incrustation from pipe

No. 1023 Sheet Metal Chisel C (TP04995)Cuts shapes in sheet metal fast

No. 1024 Moilpoint Chisel (TP05244)Breaking-up concrete, removing sand fromcastings

No. 1025 Rivet Removing Punch (TP05775)Removing rivets from brake lining of heavyduty cars

No. 1026 Rivet Caulking Chisel (TP05801)Caulking brake lining of heavy duty cars


6

SCALING

Industrial and shipboard descaling and cleaning

The unique scaler preforms scores of industrial and shipboard descaling and cleaning jobs quickly, efficiently and economically. Removes old paint and rust, dislodges solid matter or scale tar. Removes concrete adhering to panels, conveyors, mixers. Strips off bark from lumber, and scores of other applications.

Model

Specifications


MPa {kgf/cm2}

m3/min

min-1

mm

inch

mm

kg

S-250

0.59 {6}

0.27

2,500

12.7 OD

3/8

630 x 49 OD

4.1

Model

Rated Air Pressure


Stroke Speed

Size of Chisel Chuck

Hose Size

Dimension

Mass (Weight)

S-500

0.59 {6}

0.27

2,500

12.7 OD

3/8

890 x 49 OD

4.7

S-1000

0.59 {6}

0.27

2,500

12.7 OD

3/8

1,470 x 49 OD

6.1

• 38 mm Bend Scraper (No.2005) : 1 pc. on the body• Hose Lock Nut M16 : 1 pc.• Hose Nipple 3/8 : 1 pc.



S-1000Model

S-500ModelS-250

Model

Optional Chisels

PN Part Name Q'tyTP03645TP03646TP03647TP04010TP04552TP04553TP04554

1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.1 pc.

No.2001 60 mm ScraperNo.2002 38 mm ScraperNo.2003 Blank ChiselNo.2004 60 mm Concave ScraperNo.2005 38 mm Bend ScraperNo.2006 60 mm Concave Bend ScraperNo.2007 60 mm Bend Scraper2001 2002 2003 2004 2005 2006 2007

PNEUMATIC SCALER SUPER KELEN

SUPER KELEN

7

SCALING

Now chipping after welding is easy!

The AIR CHIPPER are compact, lightweight and economical tools to have on hand for all kinds of chipping work. Easy chisel replacement is made to excellent operation. The straight design is suitable for operation at narrow and deep places. In addition, the ACH-16 has many feature on the followings..... • Idle running proof structure adopted. No blowing without touching the work piece by the chisel. • Vibration on operation is reduced by low vibration structure. Especially effective on continuous operation. • Easy to handle, compact lightweight type and weight only one kilogram.

Model

Rated Air Pressure


Stroke Speed


Hose Size

Mass (Weight)

Specifications


MPa {kgf/cm2}

m3/min

min-1

mm

inch

kg

ACH-16

0.59 {6}

0.15

6,000

10.5 OD

3/8

0.9

CH-24

0.59 {6}

0.2

4,000

12.7 sq.

3/8

1.7

• Flat Chisel 20 x 120 : 1 pc. on the body• Bushing PT3/8 x NPT3/8 : 1 pc.• Hose Nipple PT3/8 x 3/8 : 1 pc.

• Curved Flat Chisel 25 x 155 : 1 pc. on the body• Bushing PT3/8 x NPT3/8 : 1 pc.• Hose Nipple PT3/8 x 3/8 : 1 pc.

Model

ACH-16Model

CH-24

Optional Chisels PN Part Name Q'ty

TQ03431TQ03453TQ03549TQ03452

TQ 03452TQ 03549TQ 03453TQ 03431

1 pc.1 pc.1 pc.1 pc.

Flat Chisel 20 x 120Curved Flat Chisel 20 x 120Flat Chisel 11 x 120Flat Chisel 20 x 180

PN Part NameChisel for Air Chipper CH-24

Chisel for Air Chipper ACH-16

Q'tyTP15234TP15233TP15166

TP 15166TP 15233TP 15234

1 pc.1 pc.1 pc.

Straight Flat Chisel 12.7 x165Flat Chisel 25 x 155Curved Flat Chisel 25 x 155

147mm

184mm

AIR CHIPPERPNEUMATIC CHIPPING HAMMER AIR CHIPPER

8

SCALING

Now chipping after welding is easy!

The AIR CHIPPER are compact, lightweight and economical tools to have on hand for all kinds of chipping work. Easy chisel replacement is made to excellent operation. The straight design is suitable for operation at narrow and deep places. In addition, the ACH-16 has many feature on the followings..... • Idle running proof structure adopted. No blowing without touching the work piece by the chisel. • Vibration on operation is reduced by low vibration structure. Especially effective on continuous operation. • Easy to handle, compact lightweight type and weight only one kilogram.

Model

Rated Air Pressure


Stroke Speed


Hose Size

Mass (Weight)

Specifications


MPa {kgf/cm2}

m3/min

min-1

mm

inch

kg

ACH-16

0.59 {6}

0.15

6,000

10.5 OD

3/8

0.9

CH-24

0.59 {6}

0.2

4,000

12.7 sq.

3/8

1.7

• Flat Chisel 20 x 120 : 1 pc. on the body• Bushing PT3/8 x NPT3/8 : 1 pc.• Hose Nipple PT3/8 x 3/8 : 1 pc.

• Curved Flat Chisel 25 x 155 : 1 pc. on the body• Bushing PT3/8 x NPT3/8 : 1 pc.• Hose Nipple PT3/8 x 3/8 : 1 pc.

Model

ACH-16Model

CH-24

Optional Chisels PN Part Name Q'ty

TQ03431TQ03453TQ03549TQ03452

TQ 03452TQ 03549TQ 03453TQ 03431

1 pc.1 pc.1 pc.1 pc.

Flat Chisel 20 x 120Curved Flat Chisel 20 x 120Flat Chisel 11 x 120Flat Chisel 20 x 180

PN Part NameChisel for Air Chipper CH-24

Chisel for Air Chipper ACH-16

Q'tyTP15234TP15233TP15166

TP 15166TP 15233TP 15234

1 pc.1 pc.1 pc.

Straight Flat Chisel 12.7 x165Flat Chisel 25 x 155Curved Flat Chisel 25 x 155

147mm

184mm

AIR CHIPPERPNEUMATIC CHIPPING HAMMER AIR CHIPPER

8

SCALING & GRINDING

A wide variety of models are available to a particular job!

MAG-25BModel

MAG-50Model

Specifications


MPa {kgf/cm2}

m3/min

min-1 (rpm)

mm

inch

kg

MAG-25B

0.59 {6}

0.4 (No load)

22,000

58 OD

1/4

0.55

MAGW-40

0.59 {6}

0.68 (No load) 0.82 (Load)

13,000

100 OD

3/8

1.55

MAG-70

0.59 {6}

0.69 (No load) 1.15 (Load)

7,100

180 OD

1/2

3.4

Model

Rated Air Pressure

Air Consumption

Free Speed

Depressed center wheel

Hose Size

Mass (Weight)

• Abrasive Wheel AC #80 : 1 pc.• 5 mm Hex. Socket Screw Key : 1 pc.• 14 mm Single Ended Spanner : 1 pc.• Bushing PT1/4 x NPT1/4 : 1 pc.

• 6 mm Hex. Socket Screw Key : 1 pc.• 17 mm Single Ended Spanner : 1 pc.• Bushing PT3/8 x NPT3/8 : 1 pc.

• 6 mm Hex. Socket Screw Key : 1 pc.• 10 mm Hex. Socket Screw Key : 1 pc.• 41 mm Single Ended Spanner : 1 pc.• Bushing PT1/2 x NPT1/2 : 1 pc.

Model

Rated Air Pressure


Free Speed

Depressed center wheel

Hose Size

Mass (Weight)

Specifications

Powerful Motor for fast and efficient grinding


MPa {kgf/cm2}

m3/min

min-1 (rpm)

mm

inch

kg

MAG-50

0.59 {6}

0.87

12,000

125 OD

1/4

2.2

• 4mm Hex. Socket Screw Key : 1 pc.• Pin Face Wrench : 1 pc.• Bushing PT3/8 x NPT 3/8 : 1 pc.

• Air Hose Sub Ass'y : 1 set• Exhaust Hose Ass'y : 1 set• Side Handle Ass'y : 1 set

MAGW-40Model

MAG-70Model

Depressed centerwheel 125mm OD




• Rear exhaust system.• Vibration-damping side handle.• Spindle lock for the replacement of wheel.• Plastic housing prevents cold hand.• Side handle can be mounted to right or left.• Built in governor.

221mm

89mm

128mm

65mm

219mm

95mm

277mm

100mm

PNEUMATIC GRINDER MYTON

MYTON

9

MAS-20BModel

Specifications


MPa {kgf/cm2}

m3/min

min-1 (rpm)

inch

kg

MAS-20B

0.59 {6}

0.4

22,000

1" OD , 1-1/2" OD and 2" OD

1/4

0.5

Model

Rated Air Pressure


Free Speed

Abrasive Disc

Hose Size

Mass (Weight)

MAS-40

0.59 {6}

0.45

13,000

100 mm OD

3/8

0.9

MAS-70

0.59 {6}

0.98

8,000

180 mm OD

3/8

1.9

• 14 mm Single Ended Spanner : 1 pc.• Cupla 200-20SH : 1pc.

• 6 mm Hex. Socket Screw Key : 1 pc.• 17 mm Single Ended Spanner : 1 pc.• Bushing PT1/4 x NPT1/4 : 1 pc.• Hose Nipple NPT 1/4 x 3/8 : 1 pc.

• 10 mm Hex. Socket Screw Key : 1 pc.• 41 mm Single Ended Spanner : 1 pc.• Cupla 200-30SH : 1pc.

MAS-40Model

MAS-70Model

Abrasive disc 1",1-1/2" & 2" OD

Abrasive disc 100mm OD

Abrasive disc180mm OD

OptionalParts PN Part Name Q'ty

TB00119TB00120TB00121TB00155

5 pcs.5 pcs.5 pcs.10 pcs.

AC 46 x 58 mm ODAC 60 x 58 mm ODAC 100 x 58 mm ODAC 80 x 58 mm OD

PN Part Name Q'tyTA9B101TA9B102TA9B103TA9B104


Paper 1" OD x #40Paper 1" OD x #60Paper 1" OD x #80Paper 1" OD x #100




PN Part Name

Grinding Disc for MYTON MAG-25B

Disc Pad for MYTON MAS-20B

1" OD Paper for MYTON MAS-20B

Q'tyTP18576TP18575TP18574

1 pc.1 pc.1 pc.

PAD (1" OD) No.1PAD (1-1/2" OD) No.2PAD (2" OD) No.3



Paper 1-1/2" OD x #40Paper 1-1/2" OD x #60Paper 1-1/2" OD x #80Paper 1-1/2" OD x #100




1-1/2" OD Paper for MYTON MAS-20B








SCALING & GRINDING

128mm

101mm

180mm

82mm

99mm

202mm


10

MAS-20BModel

Specifications


MPa {kgf/cm2}

m3/min

min-1 (rpm)

inch

kg

MAS-20B

0.59 {6}

0.4

22,000

1" OD , 1-1/2" OD and 2" OD

1/4

0.5

Model

Rated Air Pressure


Free Speed

Abrasive Disc

Hose Size

Mass (Weight)

MAS-40

0.59 {6}

0.45

13,000

100 mm OD

3/8

0.9

MAS-70

0.59 {6}

0.98

8,000

180 mm OD

3/8

1.9

• 14 mm Single Ended Spanner : 1 pc.• Cupla 200-20SH : 1pc.

• 6 mm Hex. Socket Screw Key : 1 pc.• 17 mm Single Ended Spanner : 1 pc.• Bushing PT1/4 x NPT1/4 : 1 pc.• Hose Nipple NPT 1/4 x 3/8 : 1 pc.

• 10 mm Hex. Socket Screw Key : 1 pc.• 41 mm Single Ended Spanner : 1 pc.• Cupla 200-30SH : 1pc.

MAS-40Model

MAS-70Model

Abrasive disc 1",1-1/2" & 2" OD

Abrasive disc 100mm OD

Abrasive disc180mm OD

OptionalParts PN Part Name Q'ty

TB00119TB00120TB00121TB00155


AC 46 x 58 mm ODAC 60 x 58 mm ODAC 100 x 58 mm ODAC 80 x 58 mm OD







PN Part Name

Grinding Disc for MYTON MAG-25B

Disc Pad for MYTON MAS-20B


Q'tyTP18576TP18575TP18574

1 pc.1 pc.1 pc.

PAD (1" OD) No.1PAD (1-1/2" OD) No.2PAD (2" OD) No.3







1-1/2" OD Paper for MYTON MAS-20B








SCALING & GRINDING

128mm

101mm

180mm

82mm

99mm

202mm


10

GRINDING

The perfect tool for all tasks!

L-25BModel

Specifications


Grinding Stone for AIR SONIC L-25B (Optional) Rotary bar for AIR SONIC L-35C (Optional)

MPa {kgf/cm2}

m3/min

min-1 (rpm)

mm

inch

kg

L-25B

0.59 {6}

0.4

27,000

6

1/4

0.6 (without hose)

Model

Rated Air Pressure


Free Speed

Size of Collet Chuck

Hose Size

Mass (Weight)

L-35C

0.59 {6}

0.35

37,500

6

1/4

0.45 (without hose)

• 14mm Single Ended Spanner : 1 pc.• Mounted Wheel No.2 : 1 pc.• Mounted Wheel No.3 : 1 pc.

No.1 16 OD x 32

No.5 19 OD x 28

No.2 17 OD x 32

No.6 25 OD x 13

No.3 19 OD x 20

No.7 32 OD x 10

No.4 25 OD x 25

No.8 16 OD ballPN TA9A277

PN TA9A281

PN TA9A278

PN TA9A282

PN TA9A279

PN TA9A283

PN TA9A280

No.1 CB1C-106

PN TP10594

PN TA9A284

No.5 CB5C-104

PN TP10598

No.2 CB2C-105

PN TP10595

No.6 CB6C-102

PN TP10599

No.3 CB3C-103

PN TP10596

No.7 CB7C-103

PN TP10600

No.4 CB4C-103

PN TP10597

No.8 CB8C-105

PN TP10601

• Chunk Pin : 1 pc.• Bushing PT1/4 x NPT 1/4 : 1 pc.

• 14mm Single Ended Spanner : 1 pc.• Mounted Wheel 13 x 13 x 6 x 38 : 1 pc.• Bushing PT1/4 x NPT 1/4 : 1 pc.

For all grinding, deburring and finishing jobs Special design for rotary barsL-35CModel

The high-speed mighty mite with super-efficient silencer and rear exhaust system. Wonder works on all metals, wood, and plastics, even extremely hard and exotic materials. And now that efficiency is upgraded with the addition of an air silencer and new rear exhaust system for grinding dust-it's all the more the perfect tool for toolrooms and model shops. The super efficiency of the silencermakes it possible for all craftsmen to work longer with less irritation due to noise. For precision grinding, deburring machines parts, grinding small castings, removing welding slags, shaping and finishing wood, glass and plastics. This is the compact, easy handing air tool for all tasks.

136mm 171mm

PNEUMATIC DIE GRINDER AIR SONIC

AIR SONIC

11

AL-55Model

Specifications

MPa {kgf/cm2}

m3/min

min-1 (rpm)

mm

inch

kg

AL-55

0.59 {6}

0.17

56,500

3

1/4

0.25

Model

Rated Air Pressure


Free Speed


Hose Size

Mass (Weight)

High Speed Rotation 56,500 rpm

• HI-CUPLA HA-65SN : 1 pc.• Mounted Wheel 5 x 13 x 3 : 1 pc.

• Spanner 7 : 1 pc.• Spanner 7 x 9 : 1 pc.Standard Accessories

GRINDINGDRILLING

129mm

22mm OD

AIR SONICPNEUMATICDIE GRINDER

Smooth high speed rotation and low vibration enables precision grinding. Stepless speed change from 0 to 56,500 rpm meets a wide range of grinding applications. Compact & light weight for comfortable operation over long periods of time. Triangular grip fits operator's hand. Special plastic grip prevents cold hands and absorbs vibration. Rear exhaust system.

Grinding Stone (Optional)

• 5 dia. x 13 x 3 mm : 10pcs./set

PN TB00137

PNEUMATICHAND DRILL AIR DRILL

ADR-65Model Model

Model

Rated Air Pressure


Free Speed

Max. Drilling Capacity

Mass (Weight)

Specifications


MPa {kgf/cm2}

m3/min

min-1 (rpm)

mm

kg

ADR-65

0.59 {6}

0.55

2,900

6.5 OD

0.8

ADR-100

0.59 {6}

0.67

2,000

10.0 OD

1.1

• Drill Chuck : 1 pc. on the body• Chuck Handle : 1 pc.• Bushing PT1/4 x NPT1/4 : 1 pc.• 30SH : 1 pc.

Optional Accessory• Hanger : 1pc. *A hanger to be mounted on the bottom of the grip is available as option.

The power and performance you needto drill deeper and faster

175mm

154mm

ADR-100

168mm

221mm

Built-in silencer ReversibleVariable speed adjustmentRubber grip reduces chilled hand

Change rotation direction by turning the valve as indicated.

Forward

Reverse

Reversible

Variable speed adjustmentTurn the speed control nutto change the R.P.M.

AIR DRILL

12

AL-55Model

Specifications

MPa {kgf/cm2}

m3/min

min-1 (rpm)

mm

inch

kg

AL-55

0.59 {6}

0.17

56,500

3

1/4

0.25

Model

Rated Air Pressure


Free Speed


Hose Size

Mass (Weight)

High Speed Rotation 56,500 rpm

• HI-CUPLA HA-65SN : 1 pc.• Mounted Wheel 5 x 13 x 3 : 1 pc.

• Spanner 7 : 1 pc.• Spanner 7 x 9 : 1 pc.Standard Accessories

GRINDINGDRILLING

129mm

22mm OD

AIR SONICPNEUMATICDIE GRINDER

Smooth high speed rotation and low vibration enables precision grinding. Stepless speed change from 0 to 56,500 rpm meets a wide range of grinding applications. Compact & light weight for comfortable operation over long periods of time. Triangular grip fits operator's hand. Special plastic grip prevents cold hands and absorbs vibration. Rear exhaust system.

Grinding Stone (Optional)

• 5 dia. x 13 x 3 mm : 10pcs./set

PN TB00137

PNEUMATICHAND DRILL AIR DRILL

ADR-65Model Model

Model

Rated Air Pressure


Free Speed

Max. Drilling Capacity

Mass (Weight)

Specifications


MPa {kgf/cm2}

m3/min

min-1 (rpm)

mm

kg

ADR-65

0.59 {6}

0.55

2,900

6.5 OD

0.8

ADR-100

0.59 {6}

0.67

2,000

10.0 OD

1.1

• Drill Chuck : 1 pc. on the body• Chuck Handle : 1 pc.• Bushing PT1/4 x NPT1/4 : 1 pc.• 30SH : 1 pc.

Optional Accessory• Hanger : 1pc. *A hanger to be mounted on the bottom of the grip is available as option.

The power and performance you needto drill deeper and faster

175mm

154mm

ADR-100

168mm

221mm

Built-in silencer ReversibleVariable speed adjustmentRubber grip reduces chilled hand

Change rotation direction by turning the valve as indicated.

Forward

Reverse

Reversible

Variable speed adjustmentTurn the speed control nutto change the R.P.M.

AIR DRILL

12

SANDING

OSV-60A

Sand and polish metal, wood, plastic to a super fine swirl-free finish. Light weight, compact, powerful, whisper quiet, and adjustable speed regulator. Productivity and efficiency increase with the orbital sander. The lightweight unit delivers the performance of heavy duty unit with less vibration and reduced operator fatigue.

Model

Model

Specifications

MPa {kgf/cm2}

m3/min

min-1 (rpm)

mm

mm

kg

OSV-60A

0.59 {6}

0.68

8,500

10 OD

150 OD

2.0

for self stick papers

Model

Rated Air Pressure


Motor Free Speed

Orbit Diameter

Paper Size

Mass (Weight)

Pad

StandardAccessories

• Bushing PT1/4 x NPT1/4 : 1 pc.• Spanner 17 : 1 pc.• Brush : 1 pc.• Dust Hose : 1 pc.• Dust Bag : 1 pc.• Brush : 1 pc.• Hose Nipple : 1 pc.

245mm

Compact yet extremely powerful.Built-in adjustable speed regulator

Random orbital action creates a professional finishThe special construction includes the mounting of countershaft below the rotor. This works incombination with the spindle and circularmotions for an extra-fine finish. Speedadjustments allow selection for the bestspeed for the best job. Random orbitalaction eliminates swirl patterns and issuitable for polishing, too.

Optional Parts For BABY BELTON

PN Part Name Q'tyTA9A064TB00076TB00077TB00247TB00248TB00249TA9A244

50 pcs.50 pcs.50 pcs.50 pcs.50 pcs.50 pcs.50 pcs.

Abrasive Belt Z#60 x 10mmAbrasive Belt Z#80 x 10mmAbrasive Belt Z#100 x 10mmAbrasive Belt Z#120 x 10mmAbrasive Belt Z#180 x 10mmAbrasive Belt Z#240 x 10mmAbrasive Belt AA#400 x 10mm

Abrasive Belt for BB-10

* #400 is Aluminium Belt.

PN Part Name Q'tyTB07114TB07115TB07116TB07117TB07118TB07119TB07120TB07125TB07126TB07127TB07128TB07121TB07122TB07123

20 pcs.20 pcs.20 pcs.20 pcs.20 pcs.20 pcs.20 pcs.20 pcs.20 pcs.20 pcs.20 pcs.5 pcs.5 pcs.5 pcs.

Abrasive Belt Z#60Abrasive Belt Z#80Abrasive Belt Z#100Abrasive Belt Z#120Abrasive Belt Z#180Abrasive Belt Z#240Abrasive Belt Z#400 (*)

Abrasive Belt CE#60Abrasive Belt CE#80Abrasive Belt CE#100Abrasive Belt CE#120Finish Belt A-M (Equivalent to #180)

Finish Belt A-VF (Equivalent to #320) Finish Belt S-SF (Equivalent to #400)

Abrasive Belt for BB-20Optional Accessories

PN Part Name Q'tyTA99582TA99583TA99584TA99585TA99586TA99587TA99588TA99589TA99590TA99591

100 pcs.100 pcs.100 pcs.100 pcs.100 pcs.100 pcs.100 pcs.100 pcs.100 pcs.100 pcs.

Abrasive Paper #40 Abrasive Paper #60 Abrasive Paper #80 Abrasive Paper #100Abrasive Paper #120 Abrasive Paper #180 Abrasive Paper #240 Abrasive Paper #280 Abrasive Paper #320 Abrasive Paper #400

ORBITAL SANDERPNEUMATIC DUST-FREE SANDER ORBITAL SANDER

1413

B-10NModel

SANDING

Rear exhaustsystem

Suitable for sanding jobs in narrow spaces, recessed corners or on curved surfaces

Specifications


MPa {kgf/cm2}

m3/min

min-1 (rpm)

m/min

mm

inch

kg

B-10N0.6 {6}

0.417,0001,120

10 x 3301/40.7

Model

Rated Air Pressure


Motor Free Speed

Belt Speed

Belt Size

Hose Size

Mass (Weight)

B-20N0.6 {6}0.52

17,0002,620

20 x 5201/41.2

BB-200.59 {6}

0.4316,0001,100

20 x 3301/40.8

BB-100.63 {6.4}

0.2516,0001,000

10 x 3301/40.6

B-30N0.6 {6}0.68

14,0002,160

30 x 5401/42.4

•Abrasive Belt Z#60 x 10 mm:2pcs. (1pc. on the body)•Abrasive Belt Z#80 x 10 mm:1pc.•Abrasive Belt Z#100 x 10 mm:1pc.•Abrasive Belt Z#120 x 10 mm:1pc.•2mm Hex. Wrench Key :1pc.•4mm Hex. Wrench Key :1pc.•Bushing PT1/4 x NPT 1/4:1pc.

•Abrasive Belt Z#60 x 20 mm:2pcs. (1pc. on the body)•Abrasive Belt Z#80 x 20 mm:1pc.•Abrasive Belt Z#100 x 20 mm:1pc.•Abrasive Belt Z#120 x 20 mm:1pc.•2.5mm Hex. Wrench Key :1pc.•4mm Hex. Wrench Key :1pc.•Bushing PT1/4 x NPT 1/4:1pc.•Convex Shoe:1pc.•Finger Pad Ass'y:1pc.

•Abrasive Belt Z#60 x 30 mm:2pcs. (1pc. on the body)•Abrasive Belt Z#80 x 30 mm:1pc.•Abrasive Belt Z#100 x 30 mm:1pc.•4mm Hex. Wrench Key :1pc.•5mm Hex. Wrench Key :1pc.•Bushing PT1/4 x NPT 1/4:1pc.•Sub Handle Ass'y:1set•Grip Guard:1pc.

•Abrasive Belt Z#100 x 10 mm:1pc. (on the body)•Abrasive Belt Z#120 x 10 mm:1pc.•Abrasive Belt Z#180 x 10 mm:1pc.•Abrasive Belt Z#240 x 10 mm:1pc.•1.5mm Hex. Wrench Key :1pc.•Cupla HA-65SN:1pc.

•Abrasive Belt Z#60 x 20 mm:1pc. (on the body)•Abrasive Belt Z#120 x 20 mm:1pc.•Abrasive Belt Z#240 x 20 mm:1pc.•2.5mm Hex. Wrench Key :1pc.•3mm Hex. Wrench Key :1pc.•Cupla HA-65SN:1pc.•Shoe:1pc. •Dust Cover :1pc.

B-10NModelBelt Size10 mm (W) B-20NModel

Belt Size20 mm (W) B-30NModel

Belt Size30 mm (W)

BB-10ModelBelt Size10 mm (W)

Optional Parts

PN Part Name Q'tyTQ10942TB07283TB05539

1 pc.1 set1 set

Shoe 6 (for 6 mm belt)

Bracket 6 Ass'y (for 6 mm belt)

Offset Bracket 10 Ass'y

Optional Parts for B-10NPN Part Name Q'ty

TB07109 1 setOffset Bracket 20 Ass'y

Optional Parts for B-20NPN Part Name Q'ty

TB08150 1 setOffset Bracket 30 Ass'y

Optional Parts for B-30N

PN Part Name Q'tyTB00241TB00242TB00243TB00244TB00245TB00246TA9A237TA9A064TB00076TB00077TB00247TB00248TB00249TA9A244


Abrasive Belt Z#60 x 6 mmAbrasive Belt Z#80 x 6 mmAbrasive Belt Z#100 x 6 mmAbrasive Belt Z#120 x 6 mmAbrasive Belt Z#180 x 6 mmAbrasive Belt Z#240 x 6 mmAbrasive Belt AA#400 x 6 mmAbrasive Belt Z#60 x 10 mmAbrasive Belt Z#80 x 10 mmAbrasive Belt Z#100 x 10 mmAbrasive Belt Z#120 x 10 mmAbrasive Belt Z#180 x 10 mmAbrasive Belt Z#240 x 10 mmAbrasive Belt AA#400 x 10 mm

Abrasive Belt for B-10NPN Part Name Q'ty

TA99605TA99606TA99607TA99608TA99609TB00250TB00251TA9A252TA9A253TA9A254


Abrasive Belt Z#40 x 20 mmAbrasive Belt Z#60 x 20 mmAbrasive Belt Z#80 x 20 mmAbrasive Belt Z#100 x 20 mmAbrasive Belt Z#120 x 20 mmAbrasive Belt Z#180 x 20 mmAbrasive Belt Z#240 x 20 mmAbrasive Belt AA#280 x 20 mmAbrasive Belt AA#320 x 20 mmAbrasive Belt AA#400 x 20 mm

Abrasive Belt for B-20N Abrasive Belt for B-30NPN Part Name Q'ty

TB00252TB00253TB00254TB00255TB00256TB00257TB00258TA9A262TA9A263TA9A264


Abrasive Belt Z#40 x 30 mmAbrasive Belt Z#60 x 30 mmAbrasive Belt Z#80 x 30 mmAbrasive Belt Z#100 x 30 mmAbrasive Belt Z#120 x 30 mmAbrasive Belt Z#180 x 30 mmAbrasive Belt Z#240 x 30 mmAbrasive Belt AA#280 x 30 mmAbrasive Belt AA#320 x 30 mmAbrasive Belt AA#400 x 30 mm

246mm

79mm

152mm

223mm 299mm

257mm

250mm

243mm

BB-20ModelBelt Size20 mm (W)

249mm

103mm

• Compact and lightweight, yet powerful.• Alternative rotation direction.• Ergonomically designed for right or left hand operator convenience.

• Compact and lightweight, yet powerful.• Alternative rotation direction.• Ergonomically designed for right or left hand operator convenience.

BABY BELTON

PNEUMATIC BELT SANDER BELTON

BELTON

SANDING

OSV-60A

Sand and polish metal, wood, plastic to a super fine swirl-free finish. Light weight, compact, powerful, whisper quiet, and adjustable speed regulator. Productivity and efficiency increase with the orbital sander. The lightweight unit delivers the performance of heavy duty unit with less vibration and reduced operator fatigue.

Model

Model

Specifications

MPa {kgf/cm2}

m3/min

min-1 (rpm)

mm

mm

kg

OSV-60A

0.59 {6}

0.68

8,500

10 OD

150 OD

2.0

for self stick papers

Model

Rated Air Pressure


Motor Free Speed

Orbit Diameter

Paper Size

Mass (Weight)

Pad

StandardAccessories

• Bushing PT1/4 x NPT1/4 : 1 pc.• Spanner 17 : 1 pc.• Brush : 1 pc.• Dust Hose : 1 pc.• Dust Bag : 1 pc.• Brush : 1 pc.• Hose Nipple : 1 pc.

245mm

Compact yet extremely powerful.Built-in adjustable speed regulator

Random orbital action creates a professional finishThe special construction includes the mounting of countershaft below the rotor. This works incombination with the spindle and circularmotions for an extra-fine finish. Speedadjustments allow selection for the bestspeed for the best job. Random orbitalaction eliminates swirl patterns and issuitable for polishing, too.

Optional Parts For BABY BELTON

PN Part Name Q'tyTA9A064TB00076TB00077TB00247TB00248TB00249TA9A244

50 pcs.50 pcs.50 pcs.50 pcs.50 pcs.50 pcs.50 pcs.

Abrasive Belt Z#60 x 10mmAbrasive Belt Z#80 x 10mmAbrasive Belt Z#100 x 10mmAbrasive Belt Z#120 x 10mmAbrasive Belt Z#180 x 10mmAbrasive Belt Z#240 x 10mmAbrasive Belt AA#400 x 10mm

Abrasive Belt for BB-10

* #400 is Aluminium Belt.

PN Part Name Q'tyTB07114TB07115TB07116TB07117TB07118TB07119TB07120TB07125TB07126TB07127TB07128TB07121TB07122TB07123


Abrasive Belt Z#60Abrasive Belt Z#80Abrasive Belt Z#100Abrasive Belt Z#120Abrasive Belt Z#180Abrasive Belt Z#240Abrasive Belt Z#400 (*)

Abrasive Belt CE#60Abrasive Belt CE#80Abrasive Belt CE#100Abrasive Belt CE#120Finish Belt A-M (Equivalent to #180)

Finish Belt A-VF (Equivalent to #320) Finish Belt S-SF (Equivalent to #400)

Abrasive Belt for BB-20Optional Accessories

PN Part Name Q'tyTA99582TA99583TA99584TA99585TA99586TA99587TA99588TA99589TA99590TA99591


Abrasive Paper #40 Abrasive Paper #60 Abrasive Paper #80 Abrasive Paper #100Abrasive Paper #120 Abrasive Paper #180 Abrasive Paper #240 Abrasive Paper #280 Abrasive Paper #320 Abrasive Paper #400

ORBITAL SANDERPNEUMATIC DUST-FREE SANDER ORBITAL SANDER

14

SANDING

APS-125/150

Standerd Accessories • Spanner 17 : 1 pc.• Bushing PT1/4 x NPT1/4 : 1 pc.

Ergonomically designed plastic housing conforms to the operator's hand for greater control and comfort

Model

Specifications

MPa {kgf/cm2}

m3/min

min-1 (rpm)

mm

mm

kg

kg

APS-125

0.59 {6}

0.45

10,000

5 OD

125 OD

0.69

0.10

Model

Rated Air Pressure


Motor Free Speed

Orbit Diameter

Paper Size

Mass (Weight)

Pad Mass (Weight)

APS-150

0.59 {6}

0.45

10,000

5 OD

150 OD

0.72

0.12

Extremely light. APS-125 weights just 690g.Simple structure for easy maintenance.Extermely low vibration.Adjustable speed.

Feather edging, metal preparation, and finishing work on body filler.Curved surface sanding and corner rounding in wood work.

Applications

Available from stock are Non Vacuum Models. You can modify Non Vacuum to Self Vacuum or Central Vacuum by adding a few extra parts.

For Self Vacuum & Central Vacuum

Self Vacuum

Central Vacuum

Random orbital action produces a high-quality swirl-free finish

145mm

PNEUMATIC COMPACT SANDER PALM ORBITAL SANDER

PALM ORBITAL SANDER

15

SANDING

Superlight, Quiet New low-vibration sander

FS-100C

Small and Lightweight for Comfort and ConvenienceFree Sander fits the hand like a glove. It's human-engineered to less tiring over longer periods of operation for big jobs, and compact enough to permit working easily in corners and other spots.

Minimized Hand VibrationThe turbine motor of FS-100C and the single-ball air motor of FS-50A are mounted directly onto the sanding pad to minimize the discomfort of hand vibration and lessen operator fatigue caused by vibration. This along with excellent control results in a finer finish on all surface materials.

Model

Round-Pad for FS-100C

FS-50AModel

The pad is made of sponge rubber and conform easily to the shape being worked.Double-side tape is used with round pad.

This newly developed motor features a turbine disc and is capable of high speed orbits for super-fine finishing of all materials.

Optional Accessories PN Part Name Q'ty

TB02240 1 pc.Dust Collector Ass'y PN Part Name Q'ty

TA91474TA9A265TA9A266TA9A267TA9A268TA9A269TA9A270TA9A271TB02235

1 pc.200 pcs.200 pcs.200 pcs.200 pcs.200 pcs.200 pcs.200 pcs.

1 pc.

Round Pad Ass'ySandpaper #100Sandpaper #120 Sandpaper #150Sandpaper #180 Sandpaper #240 Sandpaper #280 Sandpaper #320 Dust Collector Ass'y

ModelModel

Rated Air Pressure


Motor Free Speed

Orbit Diameter

Pad Size

Paper Size

Mass (Weight)

Specifications


MPa {kgf/cm2}

m3/min

min-1

mm

mm

mm

kg

FS-100C

0.59 {6}

0.2

20,000

1.5 OD

100 x 110

114 x 140

0.5

FS-50A

0.59 {6}

0.14

15,000

1.2 OD

75 x 82

70 x 114

0.5

• Hose E Ass'y : 1 set• Bushing PT1/4 x NPT1/4 : 1 pc.• Sandpaper #180 : 5 pcs.• Sandpaper #240 : 5 pcs.


For Free Sander FS-100C For Free Sander FS-50A

Powerful turbine motor

82mm70mm100mm110mm

FREE SANDERHANDY PNEUMATIC SANDER FREE SANDER

16

SANDING

Superlight, Quiet New low-vibration sander

FS-100C

Small and Lightweight for Comfort and ConvenienceFree Sander fits the hand like a glove. It's human-engineered to less tiring over longer periods of operation for big jobs, and compact enough to permit working easily in corners and other spots.

Minimized Hand VibrationThe turbine motor of FS-100C and the single-ball air motor of FS-50A are mounted directly onto the sanding pad to minimize the discomfort of hand vibration and lessen operator fatigue caused by vibration. This along with excellent control results in a finer finish on all surface materials.

Model

Round-Pad for FS-100C

FS-50AModel

The pad is made of sponge rubber and conform easily to the shape being worked.Double-side tape is used with round pad.

This newly developed motor features a turbine disc and is capable of high speed orbits for super-fine finishing of all materials.

Optional Accessories PN Part Name Q'ty

TB02240 1 pc.Dust Collector Ass'y PN Part Name Q'ty

TA91474TA9A265TA9A266TA9A267TA9A268TA9A269TA9A270TA9A271TB02235

1 pc.200 pcs.200 pcs.200 pcs.200 pcs.200 pcs.200 pcs.200 pcs.

1 pc.

Round Pad Ass'ySandpaper #100Sandpaper #120 Sandpaper #150Sandpaper #180 Sandpaper #240 Sandpaper #280 Sandpaper #320 Dust Collector Ass'y

ModelModel

Rated Air Pressure


Motor Free Speed

Orbit Diameter

Pad Size

Paper Size

Mass (Weight)

Specifications


MPa {kgf/cm2}

m3/min

min-1

mm

mm

mm

kg

FS-100C

0.59 {6}

0.2

20,000

1.5 OD

100 x 110

114 x 140

0.5

FS-50A

0.59 {6}

0.14

15,000

1.2 OD

75 x 82

70 x 114

0.5



For Free Sander FS-100C For Free Sander FS-50A

Powerful turbine motor

82mm70mm100mm110mm

FREE SANDERHANDY PNEUMATIC SANDER FREE SANDER

16

SANDING

Sands to a clean finish and more in less time.Compact and light.

Light sanding with piston movementA compact, lightweight and economical unit having amazingly low air consumption. Built rugged for long continuous hours of operation.Incorporates no gears and other complicated mechanisms.

Double Piston AlignmentSpecial double-action minimizes both noise and vibration so the operator works in more comfort.

Model

Specifications


MPa {kgf/cm2}

m3/min

min-1

mm

mm

mm

kg

LS-10

0.59 {6}

0.11

4,000

4

55 x 103

57 x 140

0.75

Model

Rated Air Pressure


Free Speed

Stroke

Pad Size

Abrasive Paper Size

Mass (Weight)

• Hose E Ass'y : 1 set• Bushing PT1/4 x NPT1/4 : 1 pc.• Block Rubber Pad Ass'y : 1 set• Abrasive Paper #240 : 5 pcs.• Abrasive Paper #320 : 5 pcs.

LS-10

Optional AccessoriesPN Part Name Q'ty

TB02244 1 pc.Dust Collector Ass'y

Special Sanding PadAn accessory Block Rubber Pad Ass'y can be easily trimmed to conform the shape beingworked.

103mm

55mm

PNEUMATIC RECIPROCATING SANDER LINE SANDER

LINE SANDER

17

FILING

Super efficient way of easyfiling, polishing and finishing

SH-100A

SUPER HAND replaces work.SUPER HAND is ultra-small, ultra-lightweight; yet performs with the power and efficiency of a much larger tool to meet user requirements of filling, chamfering and other jobs.It comes with the quick-change tool points for different jobs.You can work on steel, glass, brass, aluminium, wood and other materials silently.It also handles scores of big jobs with speed and ease.

Model

Rubber Pad Ass'y for SH-100A

Supporter Ass'y for SH-100A

ASH-800Model

Optional Accessories

PN Part Name Q'tyTA9A222TA9A223

TA9A224

TA9A225TA91752TA94625TB04319

5 pcs.5 pcs.

5 pcs.

5 pcs.1 set1 set1 set

Rat Tail SF-10Triangular Taper File SF-11 Half Rounded File(Rat Tail/Double Cut) SF-12Flat Bastard File SF-13Rubber Pad Ass'y for SH-100ASupporter Ass'y for SH-100ASanding Pad Ass'y for ASH-800

Model

Rated Air Pressure


Stroke Speed

Stroke

Max. Shank dia. of Points

Mass (Weight)

Specifications


MPa {kgf/cm2}

m3/min

min-1

mm

mm

kg

SH-100A

0.59 {6}

0.24

3,700

9

6.3 OD

1.1

ASH-800

0.59 {6}

0.23

6,500

8

5.5 OD

0.52

• Flat Bastard File SF-13 : 1 pc.• Rat Tail File SF-10 : 1 pc.• Triangular Taper File SF-11 : 1 pc.• Half Rounded File (Rat Tail/Double Cut) SF-12 : 1 pc.• 3 mm Hex. Socket Screw Key : 1 pc.• Bushing PT1/4 x NPT1/4 : 1 pc.

• Flat Bastard File SF-13 : 1 pc.• Rat Tail File SF-10 : 1 pc.• Triangular Taper File SF-11 : 1 pc.• Half Rounded File (Rat Tail/Double Cut) SF-12 : 1 pc.• 2.5 mm Hex. Socket Screw Key : 1 pc.• Hi Cupla (HA-65SNG) : 1 pc.

For Super Hand SH-100A & ASH-800

Flat Bastard File SF-13

Weight reduced by halffor comfortable operationover long period of time

Rat Tail File SF-10

Triangular Taper File SF-11

Half Round File (Rat Tail/Double Cut) SF-12

Sanding Pad Ass'y for ASH-800

187mm177mm

SUPER HANDPORTABLE PRECISION FINISHING FILE SUPER HAND

18

FILING

Super efficient way of easyfiling, polishing and finishing

SH-100A

SUPER HAND replaces work.SUPER HAND is ultra-small, ultra-lightweight; yet performs with the power and efficiency of a much larger tool to meet user requirements of filling, chamfering and other jobs.It comes with the quick-change tool points for different jobs.You can work on steel, glass, brass, aluminium, wood and other materials silently.It also handles scores of big jobs with speed and ease.

Model

Rubber Pad Ass'y for SH-100A

Supporter Ass'y for SH-100A

ASH-800Model


PN Part Name Q'tyTA9A222TA9A223

TA9A224

TA9A225TA91752TA94625TB04319

5 pcs.5 pcs.

5 pcs.

5 pcs.1 set1 set1 set

Rat Tail SF-10Triangular Taper File SF-11 Half Rounded File(Rat Tail/Double Cut) SF-12Flat Bastard File SF-13Rubber Pad Ass'y for SH-100ASupporter Ass'y for SH-100ASanding Pad Ass'y for ASH-800

Model

Rated Air Pressure


Stroke Speed

Stroke

Max. Shank dia. of Points

Mass (Weight)

Specifications


MPa {kgf/cm2}

m3/min

min-1

mm

mm

kg

SH-100A

0.59 {6}

0.24

3,700

9

6.3 OD

1.1

ASH-800

0.59 {6}

0.23

6,500

8

5.5 OD

0.52

• Flat Bastard File SF-13 : 1 pc.• Rat Tail File SF-10 : 1 pc.• Triangular Taper File SF-11 : 1 pc.• Half Rounded File (Rat Tail/Double Cut) SF-12 : 1 pc.• 3 mm Hex. Socket Screw Key : 1 pc.• Bushing PT1/4 x NPT1/4 : 1 pc.

• Flat Bastard File SF-13 : 1 pc.• Rat Tail File SF-10 : 1 pc.• Triangular Taper File SF-11 : 1 pc.• Half Rounded File (Rat Tail/Double Cut) SF-12 : 1 pc.• 2.5 mm Hex. Socket Screw Key : 1 pc.• Hi Cupla (HA-65SNG) : 1 pc.

For Super Hand SH-100A & ASH-800

Flat Bastard File SF-13

Weight reduced by halffor comfortable operationover long period of time

Rat Tail File SF-10

Triangular Taper File SF-11

Half Round File (Rat Tail/Double Cut) SF-12

Sanding Pad Ass'y for ASH-800

187mm177mm

SUPER HANDPORTABLE PRECISION FINISHING FILE SUPER HAND

18

FILINGCUTTING

PNEUMATICHACKSAW SUPER SAWPORTABLE FINE

FINISHING FILE MICRO AIR HAND

Special double-piston system achieved lowvibration while cutting speed improved!!

Model

Specifications


MPa {kgf/cm2}

m3/min

min-1

mm

kg

SSW-110

0.59 {6}

0.29

7,000

11

0.62

Model

Rated Air Pressure


Stroke Speed

Stroke

Mass (Weight)

• 32 mm Saw Blade : 2 pcs.• 3 mm Hex. Socket Screw Key : 1 pc.• Bushing PT1/4 x NPT1/4 : 1 pc.

SSW-110


PN Part Name Q'tyTA9A005TA9A011TB00193TB00192


32 mm Saw Blade24 mm Saw Blade18 mm Saw Blade14 mm Saw Blade

SSW-110 has many feature on the followings......

Low vibration is achieved by the special design of double piston mechanism.New adoption of piston rings minimized power loss and improved cutting efficiency.Longer piston stroke improved cutting speed so much.Rear exhaust system for chip-scattering-free operation.New double-lock throttle lever prevents unintended.Cutting Capacity : Max. plate thickness 3mm (for Mild Steel)

205mm

SUPER SAW

Select either one of the 2 modelsdepending on your applications.

1.6mm

MAH-161.6mm

Stroke

0.5mm

MAH-050.5mm

Stroke

Diamond files (5pcs/set)

Flat end file (PN TB07502)

Triangular end file (PN TB07504)

Round end file (PN TB07503)

Half-round end file (PN TB07505)

2

2

ø3

ø3

ø3

2

ø3

65

ø1

0.5

1

65

4.5

1.5

65

65

2

R1 Vice Holder (PN TB07506) Grinding stone plates such as ceramic grindingstones in the market can be also mounted.(Max size: Thickness 3.2mm x Width 20mm)

Mounting examples

MICRO AIR HAND

• Each 1pc. of diamond flat and round file• Hex. Wrench key 2 : 1pc. • Cupla Model HA-65SN : 1pc.Standard Accessories

176mm

21mm OD

Fine reciprocating motion best forprecision parts filing

Specifications

MPa {kgf/cm2}

m3/min

min-1 (rpm)

mm

mm

kg

MAH-05

0.59 {6}

0.07

22,000

0.5

3 OD

0.37

MAH-16

0.59 {6}

0.07

13,000

1.6

3 OD

0.37

Model

Rated Air Pressure


Stroke Speed

Stroke

Shank diameter of file

Mass (Weight)

MAH-05/MAH-16Model

MAH-05

MAH-16

19

CHAMFERING

HB-15B

• Ideal for chamfering before welding• Use easy-to-replace super-solid cutting tips• Each cutting tip has four working edges for good economy• Finish a surface so fine that post-sanding is unnecessary• Column R-section can be chamfered with optional attachment• No damage of workpieces is expected as heat-hardening or oxidization will seldom happen

Chamfering up to 15C

Standard accessories• Hex.Socket Screw Key 4,5,6 mm: each 1 pc.• Spanner 24 x 27: 1 pc.• Hook spanner 25 ~ 28: 1 pc.

• 3 mm T Wrench Key : 1 pc.• TA9A093 Tip 12.7 sq., 12 pcs./ set. 1 set

Optional accessories• TA9A728 Pipe Plate Ass'y for 5" to 32" OD (125mm to 800mm)

Chamfering I-beamsChamfering steel plates

Model HB-15B

Power Source (Single phase)


Rated Current

No-load Speed

Chamfering Capacity 0 C - 15 C

Chamfer Angle 15˚ ~ 45˚

Mass (Weight) 14

Specifications

A

W

min-1(rpm)

kg

115V AC

910

10.5

3,340

230V AC

910

4

2,750

15C

Model

Standard accessories• 3 & 4 mm Hex.Socket Screw Key : each 1 pc.• Spanner T-9F: 1 pc.

Optional accessories• TA9A386 Tip 9.525, 10 pcs./set• TA9A592 Tip 9.525 2R, 10 pcs./set• TA9A638 Tip 9.525 3R, 10 pcs./set• TA9A594 Inner Head Ass'y

Compact and light for speed chamfering• An outer R-part attachment allows chamfering of outer diameters with a radius greater than 170 mm.• An optional inner head ass'y allows chamfering a pipe of inner diameter larger than 100 mm (50R).

Handy Electric Chamfering Tool

MB-03A Double insulation

Specifications

3C

2R, 3R

Model

Power Supply (Single phase)


Rated Current

Chamfering Capacity

Chamfering Radius Capacity

Chamfer Angle

Rated Revolutions

Weight

MB-03A

230V or 115V AC, 50/60 Hz

430

2 / 4.5

0 - 3 C

2R, 3R

45˚

7,100

2.5

Model

278mm

150mm

108mm

220mm

295mm295mm

HAND BEVELER

MINI BEVELER

PORTABLE CHAMFERING TOOLS HAND BEVELER

W

A

min-1(rpm)

kg

20

CHAMFERING

HB-15B

• Ideal for chamfering before welding• Use easy-to-replace super-solid cutting tips• Each cutting tip has four working edges for good economy• Finish a surface so fine that post-sanding is unnecessary• Column R-section can be chamfered with optional attachment• No damage of workpieces is expected as heat-hardening or oxidization will seldom happen

Chamfering up to 15C

Standard accessories• Hex.Socket Screw Key 4,5,6 mm: each 1 pc.• Spanner 24 x 27: 1 pc.• Hook spanner 25 ~ 28: 1 pc.

• 3 mm T Wrench Key : 1 pc.• TA9A093 Tip 12.7 sq., 12 pcs./ set. 1 set

Optional accessories• TA9A728 Pipe Plate Ass'y for 5" to 32" OD (125mm to 800mm)

Chamfering I-beamsChamfering steel plates

Model HB-15B

Power Source (Single phase)


Rated Current

No-load Speed

Chamfering Capacity 0 C - 15 C

Chamfer Angle 15˚ ~ 45˚

Mass (Weight) 14

Specifications

A

W

min-1(rpm)

kg

115V AC

910

10.5

3,340

230V AC

910

4

2,750

15C

Model

Standard accessories• 3 & 4 mm Hex.Socket Screw Key : each 1 pc.• Spanner T-9F: 1 pc.

Optional accessories• TA9A386 Tip 9.525, 10 pcs./set• TA9A592 Tip 9.525 2R, 10 pcs./set• TA9A638 Tip 9.525 3R, 10 pcs./set• TA9A594 Inner Head Ass'y

Compact and light for speed chamfering• An outer R-part attachment allows chamfering of outer diameters with a radius greater than 170 mm.• An optional inner head ass'y allows chamfering a pipe of inner diameter larger than 100 mm (50R).

Handy Electric Chamfering Tool

MB-03A Double insulation

Specifications

3C

2R, 3R

Model

Power Supply (Single phase)


Rated Current

Chamfering Capacity

Chamfering Radius Capacity

Chamfer Angle

Rated Revolutions

Weight

MB-03A

230V or 115V AC, 50/60 Hz

430

2 / 4.5

0 - 3 C

2R, 3R

45˚

7,100

2.5

Model

278mm

150mm

108mm

220mm

295mm295mm

HAND BEVELER

MINI BEVELER

PORTABLE CHAMFERING TOOLS HAND BEVELER

W

A

min-1(rpm)

kg

20

Chamfer angle and width

CHAMFERING

ModelHandy Electric Chamfering Tool

EMB-0307B

3C

7C

4R

4R

Stainless Steel

Mild Steel

316.4mm

179mm

189.6mm

MINI BEVELER

Standard accessories• Insert with Hole 12.7: 1 pc.• Insert Set Screw: 1 pc.• 5 mm Hex.Socket Screw Key : 1 pc.• Spanner 8 x 10: 1 pc.

Specifications

ECB-0203Electric Radial Chamfering Tool

Smoothly chamfering straight and curved edges • Applicable up to 3C (3R) mild steel chamfering, and up to 1.5C (2R) stainless steel chamfering.

• Minimum chamfering plate thickness is 2mm (Max.0.5C)

• Insert with 4-side blades per piece practices good economy.

• An optional straight plate allows chamfering a straight edge shoulder.

In case of chamfering 3R, an optional insert for 3R is necessary, and chamfering 2R, an optional guide sleeve 24mm dia, and super solid insert for 2R are necessary.

ECB-0203

220V ~ 240V AC, 50/60Hz

450

30

11,000

0C ~ 3C, 2R, 3R

0C ~ 1.5C, 2R

45˚

2.5

2.5

1.5C 2RStainless Steel

3C 3RMild Steel

Model

Chamfering straight edges Chamfering curved edges

136mm

400mm

Standard accessories• Carbon Brush Ass'y : 1 set.• 4 mm Hex. Wrench Key : 1 pc.• Carbide Insert with Hole 12.7 : 1pc.• Insert Set Screw 4 x 7 : 1 pc.

• Hex. Nut M8 : 2 pcs.• 8 x 25 mm Hex. Socket Set Screw : 2 pcs.• Spanner T-15D : 1 pc.

Specifications

• Chamfering up to 3C stainless steel chamfering, and up to 7C mild steel chamfering.

• Carbide insert each with cutting edges on 4 sidea.

• Chamfering angle can be adjusted to any desired position at 15˚ ~ 45˚

• Pipe outer edge can be also chamfered with standard accessories that come with the rool.

• Dust box collects swarf and chips effectively.

Model

Power Supply


Rated Current

Rated Duty

Chamfering

Capacity

Chamfer Angle

Power Cord

Mass (Weight)

EMB-0307B

220V ~ 240V AC, 50/60Hz

1010

4.6

Continuous

0C ~ 7C, 2R, 3R, 4R

0C ~ 3C, 2R, 3R, 4R

15˚ ~ 45˚

4.0

3.9

CIRCUIT BEVELER

PORTABLECHAMFERING TOOLS MINI BEVELER/CIRCUIT BEVELER

Double insulation

Double insulation

A

B

C

Chamfer angleChamfer angle

45˚

30˚

15˚

Mild Steel (mm) Stainless Steel (mm)

A7

3.81.5

B7

6.65.6

C9.97.65.8

A3

2.21

B3

3.83.8

C4.24.43.9

W

A

Mild Steel

Stainless Steel

m

kg

W

min

min-1(rpm)

Chamfering

Capacity

Mild Steel

Stainless Steel

m

kg

Model

Power Supply


Rated Duty

Motor No-load Speed

Chamfer Angle

Power Cord

Mass (Weight)

21

CB-02Pneumatic Radial Chamfering Tool

Optional accessories• TA9A386 : Tip 9.525 sq. Ass'y (10 pcs.)• TA9A592 : Tip 9.525 sq. R2 Ass'y (10 pcs.)• TA9A638 : Tip 9.525 sq. R3 Ass'y (10 pcs.)

Standard accessories• C tips: 1 pc.• Adjustment gauge: 1 pc.• Spanner T-9F: 1 pc.

• Protective cap: 1 pc.• Hook Spanner 58-62: 1 pc.

Specifications

MPa {kgf/cm2}

m3/min

min-1 (rpm)

kg

Lets you chamfer easily and smoothly no matter what the curve line is

• Versatility chamfer either inner or outer edges.

• Precisely adjust chamfer dimensions with accessory gauge.

2C

2R

Chamfering range of operation (CB-02, ECB-0203)Min. Radius Min. ThicknessMin. DepthMin. Diameter

Model

CHAMFERING

116mm

136mm

CIRCUIT BEVELER

Chamfer angle and widthThe tool has the limit of chamfering width which depends on a chamfer angle.

Pneumatic Chamfering ToolLever Type Ring Type

AMB-0307AMBL-0307

Standard accessories• 3 & 4 mm Hex. Socket Screw key : each 1 pc.• Spanner: 1 pc.• Hex. nut M8 : 2 pcs.

• 8 x 25 Hex. Socket Set Screw : 2 pcs.• Insert Set Screw 4 x 7 : 1 pc.

• Applicable to stainless steel and mild steel chamfering.

• Super-solid insert with 4-side blades per piece practices good economy

• Simple to adjust chamfering depth and replace insert.

• Pipe outer edge can be also processed with standard accessories.

• Chamfering angle can be adjusted to any desired position at 15˚~ 45˚.

3C

7C

4R

Stainless Steel

Mild Steel

SpecificationsAMBL-0307, AMB-0307

0.59 {6}

0.9

14,000

0 C ~ 7 C or 2 R, 3 R, 4 R

0 C ~ 3 C or 2 R, 3 R, 4 R

15˚~ 45˚

2.9

Mild SteelStainless Steel

MPa {kgf/cm2}

m3/min

min-1 (rpm)

kg

NOW A SMALL AIR BEVELERDOES THE BIG JOBS, TOO

202mm

126mm

180mm

AMB-0307177mm

126mm

180mm

AMBL-0307

MINI BEVELER


A

B

C


45˚30˚15˚


A74

2.2

B778

C9.98.18.3

A3

2.21

B3

3.83.8

C4.24.43.9

Model

Air Pressure


Free Speed

Chamfering Capacity

Chamfer Angle

Mass (Weight)

Model CB-02

Air Pressure 0.59 {6}

Air Consumption (No load) 0.4

Free Speed 13,000

Chamfering Capacity 0C ~ 2C, 2R

Chamfer Angle 45˚

Mass (Weight) 1.8

22

CB-02Pneumatic Radial Chamfering Tool

Optional accessories• TA9A386 : Tip 9.525 sq. Ass'y (10 pcs.)• TA9A592 : Tip 9.525 sq. R2 Ass'y (10 pcs.)• TA9A638 : Tip 9.525 sq. R3 Ass'y (10 pcs.)

Standard accessories• C tips: 1 pc.• Adjustment gauge: 1 pc.• Spanner T-9F: 1 pc.

• Protective cap: 1 pc.• Hook Spanner 58-62: 1 pc.

Specifications

MPa {kgf/cm2}

m3/min

min-1 (rpm)

kg

Lets you chamfer easily and smoothly no matter what the curve line is

• Versatility chamfer either inner or outer edges.

• Precisely adjust chamfer dimensions with accessory gauge.

2C

2R

Chamfering range of operation (CB-02, ECB-0203)Min. Radius Min. ThicknessMin. DepthMin. Diameter

Model

CHAMFERING

116mm

136mm

CIRCUIT BEVELER

Chamfer angle and widthThe tool has the limit of chamfering width which depends on a chamfer angle.

Pneumatic Chamfering ToolLever Type Ring Type

AMB-0307AMBL-0307

Standard accessories• 3 & 4 mm Hex. Socket Screw key : each 1 pc.• Spanner: 1 pc.• Hex. nut M8 : 2 pcs.

• 8 x 25 Hex. Socket Set Screw : 2 pcs.• Insert Set Screw 4 x 7 : 1 pc.

• Applicable to stainless steel and mild steel chamfering.

• Super-solid insert with 4-side blades per piece practices good economy

• Simple to adjust chamfering depth and replace insert.

• Pipe outer edge can be also processed with standard accessories.

• Chamfering angle can be adjusted to any desired position at 15˚~ 45˚.

3C

7C

4R

Stainless Steel

Mild Steel

SpecificationsAMBL-0307, AMB-0307

0.59 {6}

0.9

14,000

0 C ~ 7 C or 2 R, 3 R, 4 R

0 C ~ 3 C or 2 R, 3 R, 4 R

15˚~ 45˚

2.9

Mild SteelStainless Steel

MPa {kgf/cm2}

m3/min

min-1 (rpm)

kg

NOW A SMALL AIR BEVELERDOES THE BIG JOBS, TOO

202mm

126mm

180mm

AMB-0307177mm

126mm

180mm

AMBL-0307

MINI BEVELER


A

B

C


45˚30˚15˚


A74

2.2

B778

C9.98.18.3

A3

2.21

B3

3.83.8

C4.24.43.9

Model

Air Pressure


Free Speed

Chamfering Capacity

Chamfer Angle

Mass (Weight)

Model CB-02

Air Pressure 0.59 {6}

Air Consumption (No load) 0.4

Free Speed 13,000

Chamfering Capacity 0C ~ 2C, 2R

Chamfer Angle 45˚

Mass (Weight) 1.8

22

Optional Accessories for HAND BEVELER / MINI BEVELER / CIRCUIT BEVELER

HI CUPLA ACE

Body material SizeWorking pressurePressure resistancePacking materialWorking temp.range

SpecificationsEngineering plastics

1/4", 3/8", others1.5MPa2.0MPa

NBR-5˚C~60˚C

For hose connection (PH)20PH-PLA30PH-PLA

For 1/4" hoseFor 3/8" hose

For hose connection (SH)HA-20SHHA-30SH

For 1/4" hoseFor 3/8" hose

20PM-PLA30PM-PLA

For Rc 1/4" For Rc 3/8"

HA-20SMHA-30SM

For Rc 1/4" For Rc 3/8"

20PFF-PLA For G 1/4"

For 5 ID x 8 OD hoseFor 6.5 ID x 10 OD hoseFor 8.5 ID x 12.5 OD hose

50PNG-PLA65PNG-PLA85PNG-PLA

For female thread connection (PM) For female thread connection (SM)

For urethane hose with spring nut connection (PNG)For 5 ID x 8 OD hoseFor 6.5 ID x 10 OD hoseFor 8.5 ID x 12.5 OD hose

HA-50SNGHA-65SNGHA-85SNG

For urethane hose with spring nut connection (SNG)

For male thread connection (PF)HA-T 20P-PLA / HA-65S x 2Hi Cupla Ace T type (for 2 branches)

Plastic Plug Hi Cupla Ace SocketP S

Plastic Cuplas with a bult-in locking mechanism!Pressure ratings comprable to steel Cuplas.

QUICK CONNECTIVE COUPLINGS FOR PNEUMATIC TOOLS HI CUPLA seriesHI CUPLA / HI CUPLA 200 (One-touch connection & Big flow rate type)

PlugFor hose connection17PH20PH30PH

For 1/4" hoseFor 1/4" hoseFor 3/8" hose

10PM20PM30PM

20PF30PF40PF

For Rc 1/8" For Rc 1/4"For Rc 3/8"

For R 1/4" For R 3/8"For R 1/2"

20PFF For G 1/4"

40PH400PH600PH800PH

For 1/2" hoseFor 1/2" hoseFor 3/4" hoseFor 1" hose

17SH20SH30SH


40SH400SH600SH800SH

For 1/2" hoseFor 1/2" hoseFor 3/4" hoseFor 1" hose

40PM400PM600PM800PM

400PF600PF800PF

For Rc 1/2" For Rc 1/2" For Rc 3/4" For Rc 1"

10SM20SM30SM


40SM400SM600SM800SM

For Rc 1/2" For Rc 1/2" For Rc 3/4" For Rc 1"

For R 1/2" For R 3/4" For R 1"

20SF30SF40SF

For R 1/4" For R 3/8"For R 1/2"

400SF600SF800SF

For R 1/2" For R 3/4" For R 1"

For hose connection

For female thread connection For female thread connection

For male thread connection For male thread connection

200-17SH200-20SH200-30SH


200-40SH For 1/2" hose

200-20SM200-30SM200-40SM


200-20SF200-30SF200-40SF

For R 1/4" For R 3/8"For R 1/2"

For hose connection

For female thread connection

For male thread connection

For male thread connection (parallel thiead)

SocketP S

TypeBody material SizeWorking pressurePressure resistancePacking materialWorking temp.range

Specifications

One-way shut-off cupla with an automatic shut-off valve in the socket.Important pars are hardened for excellent wear resistance and durability.

Hi CuplaSteel (chrome-plated)

1/8", 1/4", 3/8", 1/2", 3/4", 1"1.5MPa2.0MPa

NBR-20˚C~80˚C

Hi Cupla 200 Steel (chrome-plated)

1/8", 1/4", 3/8", 1/2" 1.0MPa1.5MPa

NBR-5˚C~60˚C

PN

TA9A093

TA9A896

TB01159

TB01791

TB01651

TB01790

TA9A386

TA9A592

TA9A638

TA9A728

TB02539

TA9A594

TB02857

TB03097

TB02862

TB03424

TQ01683

Part Name

Insert 12.7 Ass'y

Insert 12.7 with hole Ass'y


Insert 12.7 Ass'y R2






Plate Ass'y for pipe

Attachment for small dia. pipe

Inner head Ass'y

Guide sleeve 24 mm dia. Ass'y

Plate Ass'y for straight line use

Dust Box Ass'y

Spanner T-9D

Spanner T-15D

Sales Unit

12pcs./set

10pcs./set

10pcs./set

10pcs./set

10pcs./set

10pcs./set

10pcs./set

10pcs./set

10pcs./set

1 set

1 set

1 set

1 set

1 set

1 set

1 pc.

1 pc.

Application model

HB-15B

AMB-07

EMB-0307B, AMB-0307, AMBL-0307, ECB-0203

EMB-0307B, AMB-0307, AMBL-0307, ECB-0203

EMB-0307B, AMB-0307, AMBL-0307, ECB-0203

EMB-0307B, AMB-0307, AMBL-0307

MB-03A, CB-02

MB-03A, CB-02

MB-03A

HB-15B

EMB-0307B, AMB-0307, AMBL-0307

MB-03A

ECB-0203

ECB-0203

ECB-0203

MB-03A, CB-02

EMB-0307B, AMB-0307, AMBL-0307, ECB-0203

Remarks

For pipe 125~800 mm dia.

For pipe 80~200 mm dia.

For min. 100 mm dia.

For chamfering R2

Used with Plate Ass'y for straight line use

23

OTHER PRODUCT LINES MACHINE TOOLS

Electric & Hydarulic Machine Tools,Labor-saving plus improved work efficiency

A wide range of unique tools for boring and punching

ATRA ACE autoPORTABLE MAGNETIC BASE AUTOMATIC DRILLING MACHINE

Model WA-3500

HANDY SELFERELECTRICALLY OPERATED HYDRAULIC PUNCHER

Model E25-0615

JETBROACH CUTTERS &HI-BROACH CUTTERS

ANNULAR CUTTERS

JETBROACH

HI-BROACH

SELFER ACEPORTABLE DOUBLE-ACTING HYDRAULIC PUNCHER

HYDARULIC PUMPfor SELFER ACE

Puncher & Pump

Double-Acting

Puncher

SELFER HA TypePORTABLE SINGLE-ACTING HYDRAULIC PUNCHER

HYDRAULIC PUMPfor SELFER HA Type

Puncher & Pump

Single-Acting

Puncher

ATRA ACE manual feedPORTABLE MAGNETIC BASE DRILLING MACHINE

Model AO-5575


Model WOJ-3200

24

OTHER PRODUCT LINES MACHINE TOOLS

Electric & Hydarulic Machine Tools,Labor-saving plus improved work efficiency

A wide range of unique tools for boring and punching

ATRA ACE autoPORTABLE MAGNETIC BASE AUTOMATIC DRILLING MACHINE

Model WA-3500

HANDY SELFERELECTRICALLY OPERATED HYDRAULIC PUNCHER

Model E25-0615

JETBROACH CUTTERS &HI-BROACH CUTTERS

ANNULAR CUTTERS

JETBROACH

HI-BROACH

SELFER ACEPORTABLE DOUBLE-ACTING HYDRAULIC PUNCHER

HYDARULIC PUMPfor SELFER ACE

Puncher & Pump

Double-Acting

Puncher

SELFER HA TypePORTABLE SINGLE-ACTING HYDRAULIC PUNCHER

HYDRAULIC PUMPfor SELFER HA Type

Puncher & Pump

Single-Acting

Puncher


Model AO-5575


Model WOJ-3200

24

MEDO pumps are unique products featuring a Linear-motor-driven Free Piston System.NITTO KOHKI has made available a complete series of air compressors and suction pumpsthat incorporate this revolutionary mechanism.These are quite appropriate as air sourcesor suction power units for variouspneumatically operated equipmentand apparatus in advanced industries.

Professional Tools for High Technology

DLV7300 SeriesDLV7500/8500 SeriesDLV7000/8000 SeriesDLV7100/7200/8100/8200 SeriesDLV3100/3300 SeriesDLV5720/5720H/5740/5740H/5750 SeriesDLV5800 SeriesDLV30SP/30HP-MKG (with built-in brushless motors)

Models

NITTO KOHKI "delvo" Electric Screwdrivers are high-quality tools for professional use,with special emphasis on precise control of torque and long life. They apply just thecorrect amount of torque –with sure, positive control always at your fingertips.They're smooth and shockless in operation, too. NITTO KOHKI's customer-orientedservice system is directly connected to sales agents to ensure thatyou can use "delvo" Electric Screwdrivers with confidence.

DLV 5720/5720H/5740 Series

TW-00/TW-0/TW-3/TW-5/TW-9/TW-15/TW-22/TW-30/TW-40/TW-50/TW-60/TW-70

TIGON Spring Balancer ImprovesWork Safety & Efficiency

Models

Capacities ranging from 0.5 ~ 70 kg.

DLV 30SP-MKG

DLV 30HP-MKG

OTHER PRODUCT LINESdelvo / Spring Balancer

Linear-motor-driven Free Piston System

25

SAFETY GUIDE

Safety Precautions

Be sure to read and understand all safety precautions mentioned below and to follow the instructions given to operate eachNitto Kohki brand tool as stated in the operator’s manual. Keep operators manual close by when operating machines or toolsfor reference of safe operation and precautions.

Failure to observe the following warnings may cause a potentially hazardous situation, which if not corrected could resultin serious injury or death. To prevent the risk of fire, electric shock, and/or personal injury, proper safety guidelines shouldbe followed at all times.

Warning for ALL Machines and Tools

Notice for Air ToolsNotice for Electric Tools

• Always keep the work area free from clutter and potentially dangerousconditions such as hanging power cords, working debris, air hoses, andgarbage to prevent accidents from occurring.

• Consider proper working environments for each tool carefully. Do notexpose tools to extreme amounts of moisture or direct contact with wateror rain. Keep area well lit at all times to prevent hidden dangers and neveroperate the equipment near flammable liquids or in gaseous or explosiveatmospheres.

• Keep all tools and tool accessories away from children and all unauthorizedpersonnel. Serious injury or possible death may result from machines beinghandled by children.

• Properly store machines and accessories while not in use. They should be keptin a dry, locked-up location out of reach children or unauthorized personnel.

• Improper or negligent use of tools will cause increased maintenance costs,and the amount of time in which to complete the job. Always let the tool dothe work at the rate of which it was designed. Best performance is alwaysachieved by reading and understanding the proper operation of eachmachine or tool.

• Always wear safety glasses and protective hand and foot wear during oraround operating tools. Wear a protective hair covering to contain long hair.Do not wear loose clothing and/or accessories as they may be caught inmoving parts and inflict serious injury or possible death.

• Wear respiratory protection when working in an environment where dustparticles are generated during operation.

• Do not over-reach or allow yourself to become unstable during tooloperation and always maintain a correct posture.

• Use clamps or a vise to secure the work piece tightly and eliminatevibration. Never hold the work piece with your hands, keep both hands onthe tool for increased productivity.

• Use the right tool or machine that can complete the job within itsspecifications. Do not attempt to adapt smaller machines or tools tocomplete a job designed for heavy-duty equipment. Do not use the tools forother than what they were designed for. There is a right tool for each job, beaware of tool limitations and never overload.

• Make sure to inspect all external screws, nuts, bolts and attached accessoriesare fastened tightly and secure prior to each use. All moving parts should befree from obstruction and allowed to operate smoothly. Any damaged ormissing parts should be repaired or replaced by the sales agent or distributorfrom which the tool was originally purchased. Do not use machines or toolswhich cannot be activated or stopped with a power switch or lever.

• Do not use any machine with a damaged, frayed, cut, or deteriorated powercords or air hoses. Always replace at the first sign of damage.

• Always remove all tools required to adjust, add, or remove parts from toolsprior to use to prevent tool damage or user injury.

• Always avoid an unexpected start by having all power buttons or levers inthe off position prior to attaching to a power or air supply. Never carry toolswith your finger on the on/off switch or lever when the power or air supplyis attached.

• Do not use the power or air supply lines to move, carry or support the toolduring usage or transportation. Do not place the power or air line near aheat source, oil, water, or items with sharp edges.

• Never leave a machine or tool running unattended. Keep a firm grip on thedesignated areas of the machine or tool until it comes to a complete stop.Always turn the power switch or lever to the off position and disconnectfrom the power source when not in use.

• Do not disassemble or modify a tool to complete a job other than what itwas designed for. This will void any warranty on the equipment and maycause serious personal injury or possible death.

• Maintenance is necessary for all machines and tools. Always maintain bladesand cutters properly and replace when edges become damaged or are notsharp enough for safe operation. Follow the instruction manual for lubricationneeds and adjustment points if applicable. Check the power and air supplylines periodically and change accordingly to safety regulations. If anextension line is adopted, always make sure that it meets or exceeds toolrequirements for amperage or air supply before using and is rated foroutdoor usage. Change supply lines whenever they are found to be defectiveor damaged. Keep the grip and handles dry and clean of grease or oil sothat it will not disturb proper operation.

• Switch off and disconnect from power source before servicing equipment orchanging accessories.

• Be alert and pay close attention to the work being performed at all times.Do not operate machines or tools when heavily fatigued. Users should beaware of all circumstances surrounding their application.

• Use only recommended parts and accessories as per individual machine ortool operator manuals. Use of improper accessories or attachments mayresult in serious injury or possible death.

• All repairs and services must be performed by authorized Nitto Kohki dealersor technicians.

• Do not deface or remove any label, warning indicator, or nameplateassociated with each machine or tool.

• The power source must be limited to the individual tools specifications as statedon the nameplate or instruction manual.

• Make sure that all machine and power tools are properly grounded at all times(excludes double-insulated tools). Always use a GFCI (Ground-Fault-Circuit-Interrupt) to protect the user and surrounding persons from electric shock.

• Be aware of low voltage situations. Improperly gauged extension cords orpower cords used or shared with other electrical devices will cause all tools onthe line to not run at optimal performance. This condition may result in damageto the machine and/or operator.

• Air pressure at the inlet of the tool must not exceed 0.59MPa (6kgf/cm2).

26

SAFETY GUIDE

Safety Precautions

Be sure to read and understand all safety precautions mentioned below and to follow the instructions given to operate eachNitto Kohki brand tool as stated in the operator’s manual. Keep operators manual close by when operating machines or toolsfor reference of safe operation and precautions.

Failure to observe the following warnings may cause a potentially hazardous situation, which if not corrected could resultin serious injury or death. To prevent the risk of fire, electric shock, and/or personal injury, proper safety guidelines shouldbe followed at all times.

Warning for ALL Machines and Tools

Notice for Air ToolsNotice for Electric Tools

• Always keep the work area free from clutter and potentially dangerousconditions such as hanging power cords, working debris, air hoses, andgarbage to prevent accidents from occurring.

• Consider proper working environments for each tool carefully. Do notexpose tools to extreme amounts of moisture or direct contact with wateror rain. Keep area well lit at all times to prevent hidden dangers and neveroperate the equipment near flammable liquids or in gaseous or explosiveatmospheres.

• Keep all tools and tool accessories away from children and all unauthorizedpersonnel. Serious injury or possible death may result from machines beinghandled by children.

• Properly store machines and accessories while not in use. They should be keptin a dry, locked-up location out of reach children or unauthorized personnel.

• Improper or negligent use of tools will cause increased maintenance costs,and the amount of time in which to complete the job. Always let the tool dothe work at the rate of which it was designed. Best performance is alwaysachieved by reading and understanding the proper operation of eachmachine or tool.

• Always wear safety glasses and protective hand and foot wear during oraround operating tools. Wear a protective hair covering to contain long hair.Do not wear loose clothing and/or accessories as they may be caught inmoving parts and inflict serious injury or possible death.

• Wear respiratory protection when working in an environment where dustparticles are generated during operation.

• Do not over-reach or allow yourself to become unstable during tooloperation and always maintain a correct posture.

• Use clamps or a vise to secure the work piece tightly and eliminatevibration. Never hold the work piece with your hands, keep both hands onthe tool for increased productivity.

• Use the right tool or machine that can complete the job within itsspecifications. Do not attempt to adapt smaller machines or tools tocomplete a job designed for heavy-duty equipment. Do not use the tools forother than what they were designed for. There is a right tool for each job, beaware of tool limitations and never overload.

• Make sure to inspect all external screws, nuts, bolts and attached accessoriesare fastened tightly and secure prior to each use. All moving parts should befree from obstruction and allowed to operate smoothly. Any damaged ormissing parts should be repaired or replaced by the sales agent or distributorfrom which the tool was originally purchased. Do not use machines or toolswhich cannot be activated or stopped with a power switch or lever.

• Do not use any machine with a damaged, frayed, cut, or deteriorated powercords or air hoses. Always replace at the first sign of damage.

• Always remove all tools required to adjust, add, or remove parts from toolsprior to use to prevent tool damage or user injury.

• Always avoid an unexpected start by having all power buttons or levers inthe off position prior to attaching to a power or air supply. Never carry toolswith your finger on the on/off switch or lever when the power or air supplyis attached.

• Do not use the power or air supply lines to move, carry or support the toolduring usage or transportation. Do not place the power or air line near aheat source, oil, water, or items with sharp edges.

• Never leave a machine or tool running unattended. Keep a firm grip on thedesignated areas of the machine or tool until it comes to a complete stop.Always turn the power switch or lever to the off position and disconnectfrom the power source when not in use.

• Do not disassemble or modify a tool to complete a job other than what itwas designed for. This will void any warranty on the equipment and maycause serious personal injury or possible death.

• Maintenance is necessary for all machines and tools. Always maintain bladesand cutters properly and replace when edges become damaged or are notsharp enough for safe operation. Follow the instruction manual for lubricationneeds and adjustment points if applicable. Check the power and air supplylines periodically and change accordingly to safety regulations. If anextension line is adopted, always make sure that it meets or exceeds toolrequirements for amperage or air supply before using and is rated foroutdoor usage. Change supply lines whenever they are found to be defectiveor damaged. Keep the grip and handles dry and clean of grease or oil sothat it will not disturb proper operation.

• Switch off and disconnect from power source before servicing equipment orchanging accessories.

• Be alert and pay close attention to the work being performed at all times.Do not operate machines or tools when heavily fatigued. Users should beaware of all circumstances surrounding their application.

• Use only recommended parts and accessories as per individual machine ortool operator manuals. Use of improper accessories or attachments mayresult in serious injury or possible death.

• All repairs and services must be performed by authorized Nitto Kohki dealersor technicians.

• Do not deface or remove any label, warning indicator, or nameplateassociated with each machine or tool.

• The power source must be limited to the individual tools specifications as statedon the nameplate or instruction manual.

• Make sure that all machine and power tools are properly grounded at all times(excludes double-insulated tools). Always use a GFCI (Ground-Fault-Circuit-Interrupt) to protect the user and surrounding persons from electric shock.

• Be aware of low voltage situations. Improperly gauged extension cords orpower cords used or shared with other electrical devices will cause all tools onthe line to not run at optimal performance. This condition may result in damageto the machine and/or operator.

• Air pressure at the inlet of the tool must not exceed 0.59MPa (6kgf/cm2).

26

DISTRIBUTED BY

Printed in Japan 08L- 1

NITTO KOHKI CO.,LTD.

Head Office 9-4, Nakaikegami 2-chome, Ohta-ku, Tokyo 146-8555 JapanPhone : +81-3-3755-1111 Fax : +81-3-3753-8791

E-mail : [email protected] : www.nitto-kohki.co.jp

Specifications and designs are subject to change at any time without notice.

Overseas Affiliates/Offices

NITTO KOHKI U.S.A. INC.TEL:+1-630-924-9393 FAX:+1-630-924-0303

NITTO KOHKI EUROPE CO., LTD.(UK)TEL:+44-1923-239-668 FAX:+44-1923-248-815

NITTO KOHKI DEUTSCHLAND GMBHTEL:+49-7157-22436 FAX:+49-7157-22437

NITTO KOHKI AUSTRALIA PTY. LTD.TEL:+61-7-3340-4600 FAX:+61-73340-4640

NITTO KOHKI CO., LTD. SINGAPOREBRANCHTEL:+65-6227-5360 FAX:+65-6227-0192

NITTO KOHKI CO., LTD. BANGKOKREPRESENTATIVE OFFICETEL:+66-2-632-0307 FAX:+66-2-632-0308

NITTO KOHKI CO., LTD. SHANGHAIREPRESENTATIVE OFFICETEL:+86-21-6415-3935 FAX:+86-21-6472-6957

NITTO KOHKI CO., LTD. SHENZHENREPRESENTATIVE OFFICETEL:+86-755-8375-2185 FAX:+86-755-8375-2187

NITTO KOHKI CO., LTD. SEOULREPRESENTATIVE OFFICE

NITTO KOHKI Co,.LTD. Headquarters Machine Tools...

Documents

Transcript of NITTO KOHKI Co,.LTD. Headquarters Machine Tools...