Nitek linear motors presentation English
-
Upload
marco-gavesi -
Category
Technology
-
view
322 -
download
3
Transcript of Nitek linear motors presentation English
CompanyIntroduction
Nitek linear motors is the NISE srl linear motor division and it is focused on design, production and distribution of linear system for industrial application. Our customers are manufacturers of automatic machines that integrates our product in their automation and control systems.
Our product are standardized and are on stock for short delivery time. Our international partners help us to better support our customers in any countries.
The headquarter of Nitek linear motors is based in Calderara di Reno (Bologna) Italy in the Industrial Bargellino Area where production plant, technical department and commercial office are present. Nise srl distributes product under brand name NITEK as registed brand name.
History of Nitek Linear motors
Nitek linear motors was founded as indipendent (Nitek srl) focused on design on innovative product in the linear motion, in particular tubular linear motors.20082008
Nise srl acquired Nitek srl becoming Nitek linear motors division.20102010Green Drive tubular linear motors standard series was released on the market and an agreement with manufacturing plants in Czech Republic was signed for the production of the Ironcore L series.
20112011
20132013 Patent applications for Rotolinear and Integrated motor feedbackNitek registered mark in China
20122012 ISO 9001:2000 Certification from DNVNitek registered mark in Italy
System Integrators and partners Worldwide
TECHNOLOGY BACKGROUNDEU Linear motor evolution
FirstLinear motor
photo
1845
1968
Firstcommercial
Thyristortechnology
1980
FirstasynchronousLinear motor
From Mannesmann
Demag
1985
High performance NdFeB
Magnets availableOn the market
1992
SiemensIndramat
commercializeIroncore Linear
motors
1997
Linmot (CH) & Lineadrives (GB)
Commercialize tubular linear motor
2009
NISE (IT)realised the
first tubular linear motor in Italy
today
TECHNOLOGY BACKGROUNDLinear motor tree
LINEAR MOTOR
Synchronous Asynchronous
Ironless IroncoreIronlessIronless
Tubular U-shaped Tubular Flat bed
Ironcore Flat bed
TECHNOLOGY BACKGROUNDfrom rotary to linear / tubular linear
Iron Lamination or plastic support for coil Magnets
TECHNOLOGY BACKGROUNDfrom rotary to linear / tubular linear
UVW
Class H three phase windingsNo contact between slider and coil
Large airgap
Igus X seriesLinear bearing on flange(replacable)
Integrated Encoder
Stainless Steel AISI 304 shaftWith NdFeBr permanent magnets
Rotatable connector for signal and power
Green Drive Tubular Linear motor structure
PRODUCT LINEfrom building block to complete systems
Green Picker 2DGreen Picker Linear Delta 3D/4DGreen Drive Gantry 2D
Green Drive StandardGreen Drive ISOGreen Drive HygienicGreen Drive RotolinearGreen Drive Stage
Green Drive N seriesL series flat ironcore
Complete actuatorComplete actuator
Complete systemComplete system
Building blockBuilding block
RoboticsRobotics
P&PP&PSingleSingleAxisAxis
Co
mp
lete
mac
hin
eC
om
ple
te m
ach
ine
SingleSingleAxisAxisMfgMfg
PRODUCT LINEMarket positioning
Number of applicationNumber of application
Axi
s p
reci
sio
nA
xis
pre
cisi
on
Ultra high precision< 0,1 µm
high precision< 10 µm
low precision< 100 µm
+
+
Machine toolEDM machines
Cutting machine
Pick and placePneumatic replacement
GREEN DRIVE STANDARD
GD16 D/T/Q
Flange 66 x 66 mmPeak force upto 176 N
GD25 DS/TS/XS
Flange 88 x 88 mmPeak force upto 800 N
Mounting by nuts in T-slots : dimension M5/M6/M8IP65 ProtectionCompatible with many servo drives on the marketRotatable connector from Intercontec (Germany)
Green Drive accessories
Antirotation with pneumatic brake
Antirotation with standard linear guides
GREEN DRIVE ISO
GDI25/35 TS/XS/ES
Flange 70 x 70 mmPeak force upto 2000 N
Compatible with ISO 15552 pneumatic dimensionsIP65 ProtectionFixing by holes in the flangeCompatible with many servo drives on the marketRotatable connector from Intercontec (Germany)Other model GD25 available with the same flange
GREEN DRIVE HYGIENIC
GDI16 D/T/QFlange 66 x 66 mmPeak force upto 120 N
GDI25 DS/TS/XSFlange 88 x 88 mmPeak force upto 560 N
Completely in stainless steel materialIP69KWashableFixing by holes in the flange
ROTOLINEAR GDR16/25 D/T/QFlange 66x66 or 88 x 88 mmPeak force upto 800 NPeak torque upto 11,8 Nm
Rotative brushless motor with rotary ball spline precision bearing from Japanese manufacturer.High rigidity and precision of shaftIndependent motion of rotation and linear part.Stroke upto 200 mm
GREEN DRIVE STAGE
GDM25Peak force upto 704NStroke upto 2000 mm
Carriage guided by linear guide Integrated encoder system
GREEN DRIVE N SERIES (special version)to replace ballscrews
N250SS/DS/TS/QS/XSFlange 50 x 50 mmPeak force upto 704 N
Motor without bearings and encoderEspecially designed for stage integration No contact: Airgap from 0.5 to 0.75 mmNeed external linear guideNeed external encoder magnetic or opticNeed external encoder magnetic or optic
Robotics:: Green Drive Linear Delta Robot 2D
Cost effective Pick and place applicationWithout cable in motionVery compact designPayload upto 1.5 Kg
Robotics : Green Drive Linear Delta Robot
3 axis and 3 axis with rotationExpecially design to lowering the cost of delta robotMinimazing the mechanical parts.Payload upto 3 Kg.
L SERIES IRONCOREL030,L050,L075,L100,L150,L200,L250
Peak force upto 15750 N
IP55 and IP68 versionMagnet track in different lengths: (1024,512,256,128 mm)
PRODUCT PLANTS AND LOCATIONS
GREEN DRIVE- Produced in Italy- 20-30 motors per week- 100% of product test - 2 to 4 weeks standard delivery time- In house R&D and testing
L series Ironcore- Produced in Czech Republic- 100 motors per week- 100% of product test- 4-6 weeks standard delivery time
Nitek linear motors are compatible with these servo drives brands:Nitek linear motors are compatible with these servo drives brands:
NITEK is also able to provide own servo drive solution, please visit this link: http://www.nitek.it/servo-azionamento-mbd-nitek---make-move_prd_pr3_48_98_ita.aspx
Main differences between Linmot standard series and Nitek
Parameter Nitek Green Drive Linmot standard series
Winding type 3 phase 230 or 400 VAC
2 phase80 VDC(need line transformer)
Encoder type Standard SIN/COS 1VppIncremental ABBiSS interface
Non standard SIN/COS
Thermal performance Upto H class (180°C)Nominal force is measured wihtout additional heat sink
Class E (100°C)Need aluminium extrusion profile to reach nominal force
Compatibility with servo drive
Full Not compatible(Need own drive)
Bearings Replacable Igus X series
Non replacable “Delrin” material used to guide the slider
Rod construction Using fixing screwRepairable
Usign epoxy Not repairable
Fixing Full set of accessories for linear guides and ball bushUsing T-slots
Limited solution based on ball bushing
Important links:Important links:
1. website: 1. website: www.nitek.itwww.nitek.it2. product images: 2. product images: http://www.pinterest.com/niteklinear/http://www.pinterest.com/niteklinear/3. product video: 3. product video: http://www.youtube.com/user/nitekadmhttp://www.youtube.com/user/nitekadm4. product and events information:4. product and events information:
https://twitter.com/nisenitekhttps://twitter.com/nisenitek5. company information and peoples:5. company information and peoples:
http://www.linkedin.com/company/nise-srlhttp://www.linkedin.com/company/nise-srl6. catalogues:6. catalogues:
http://www.nitek.it/download_dwn_dl6_ita.aspxhttp://www.nitek.it/download_dwn_dl6_ita.aspx7: application examples:7: application examples:
http://www.nitek.it/applicazioni_pag_pg17_ita.aspxhttp://www.nitek.it/applicazioni_pag_pg17_ita.aspx
Websmart web-based online sizing Tool from NITEKWebsmart web-based online sizing Tool from NITEKhttp://websmart.nitek.ithttp://websmart.nitek.it