Next GenerationSurface Protection

Hydrophobic surface protection system. 6K by CRL is a two-step surface protection treatment for glass, sandblasted glass, and stainless steel.

EU6K14UK

3Email: CRL@crlaurence.co.uk | www.crlaurence.co.ukFor more information Freephone 00 800 0421 6144 (UK & Europe) | Freefax 00 800 0262 32992

2 stage process6K is applied in two easy colour coded stages, Pre-Clean (or Deep-Clean for Sandblasted Glass) is applied to ensure an ideal clean surface in preparation for 6K Protect application. 6K Protect is effortlessly applied using 2 – 3 trigger sprays per 0.25m2 and is easily polished into the surface until clear. Immediately after the application of 6K Protect, the nanoparticles form a strong bond with the surface in a natural chemical reaction.

Non irritant6K won’t cause irritation, it’s a natural silica dioxide based solution. Silica dioxide is most commonly found in nature as sand or quartz and not to be confused with the synthetic polymer silicone.

UV stable for long life6K provides longevity; unlike other coatings it’s UV stability enables functionality for many years.

Large coverage6K provides great value for money. A 1 Litre bottle will cover approximately 100m2, giving between two and four times the coverage of alternative synthetic polymer silicones, depending on the product compared against.

Abrasion resistant6K creates a permanent chemical bond with the substrate and enables excellent abrasion resistance; synthetic polymer silicone can be easily removed by abrasion. 6K provides chemical stability and is resistant to almost all standard household and industrial cleaners (with the exception of alkali).

Hydrophobic protection6K uses Nano technology and provides a hydrophobic, water repellent Nano coating, the hydro and oleo phobic effects makes it difficult for particles of contamination such as grease and dirt to adhere and allows them to be easily removed.

Next Generation Surface Protection for Glass, Sandblasted Glass and Stainless Steel...

6K isn’t like other glass coatings. The 6K surface protection system is specifically designed to protect both Glass and Stainless Steel using Nano technology to provide a hydrophobic, water repellent coating. The hydro- and oleo phobic effects makes it difficult for particles of contamination such as grease and dirt to adhere and allows them to be easily removed, without applying abrasive agents - giving the ‘Easy-clean’ effect.

Easily applied in two stages, 6K also provides great value for money. A 1 Litre bottle will cover approximately 100m2, giving between two and four times the coverage of alternative synthetic polymer silicones, depending on the product compared against. 6K is natural silica dioxide based solution, Silica dioxide is most commonly found in nature as sand or quartz and not to be confused with synthetic polymer silicone.

6K offers great value and versatility, and is ideal for combined Glass and Stainless Steel installations such as Glass Shower Screens, Glass Canopies, Balustrades and Railings, such as the TAPER-LOC system. It also reduces maintenance and cleaning of glass and stainless steel in hard to reach places like Conservatory roofs.

The next generation difference...

5Email: CRL@crlaurence.co.uk | www.crlaurence.co.ukFor more information Freephone 00 800 0421 6144 (UK & Europe) | Freefax 00 800 0262 32994

6K for Glass & Stainless Steel Ideal Applications

Own Label Version Available

Own Label Version Available

DESCRIPTION

CRL 6K Hydrophobic Surface Protection System for Glass and Stainless Steel • Stage one - Pre-clean• Thoroughly cleans glass or stainless steel ready for the protection stage• Ideal for shower screens and glass railings• Recommended for use with the CRL Pre-cleaning Cloth (red)• Dries streak-free• Conforms to EN 45001

CRL 6K Hydrophobic Surface Protection System for Glass and Stainless Steel • Stage two - Protect• 3 year protection lifespan• Protects glass or stainless steel• Ideal for shower screens and glass railings• Nano-technology• Long lasting - wide coverage• Conforms to EN 45001

PC6010 100ml

PC6025 250ml

PC6050 500ml

PC6100 1 Litre

6K6010 100ml

6K6025 250ml

6K6050 500ml

6K6100 1 Litre

CRL Pre-Clean Cloth for the 6K Hydrophobic Surface Protection System • To be used with CRL6K Pre-clean products

CRL Protect Cloth for the 6K Hydrophobic Surface Protection System • To be used with CRL6K Protect products

CRL 6K Aftercare Glass Cleaner • Non-silicone based glass cleaner• Leaves glass clear and smear-free• Ideal for shower screens

PCCL0TH Red - Pre clean

6KCL0TH Blue - Protect

AC6050 500ml

CAT. NO.

Product Range

Stage One Pre-Clean

Stage TwoProtect

Shower Screens

Protects glass surfaces from

limescale and other contam

inants.

Keeps glass looking cleaner for

longer and easier to clean

Reduces maintenance and cleaning of glass and stainless steel in hard to reach places

Glass & Stainless Steel Railings Awnings Conservatory Roofs

7For more information Freephone 00 800 0421 6144 (UK & Europe) | Freefax 00 800 0262 32996

DESCRIPTION

CRL 6K Hydrophobic Surface Protection System for Sandblasted Glass• Stage one – Deep Clean• Thoroughly cleans sandblasted glass

for the protection stage• Ideal for Sandblasted Glass• Recommended for use with the

CRL Deep cleaning cloth (yellow)• Dries streak-free

CRL 6K Hydrophobic Surface Protection System for Sandblasted Glass • Stage two - Protect• 3 year protection lifespan• Ideal for sandblasted glass• Nano-technology• Long lasting - wide coverage

6KSBD660 660ml

6KSBP100 1 Litre

6KSBP050 500ml

6K Sandblast Deep Clean ClothCRL Deep Clean Cloth for the 6K Hydrophobic Surface Protection System for Sandblasted Glass

• To be used with 6KSBD660 Deep Clean

6K Sandblast Protect ClothCRL Protect Cloth for the 6K Hydrophobic Surface Protection System for Sandblasted Glass

• To be used with 6KSBP100 & 6KSBP050 Protect

6KSBDCLOTH Yellow - Deep clean

6KSBPCLOTH Green - Protect

CAT. NO.

Protect sandblasted surfaces from greaseStage One

Deep Clean

Stage TwoProtect

Email: CRL@crlaurence.co.uk | www.crlaurence.co.uk

CRL 6K Aftercare Glass Cleaner • Non-silicone based glass cleaner• Leaves glass clear and smear-free• Ideal for shower screens

AC6050 500ml

6K for Sandblasted Glass

Product Range

Ideal Applications

6K for Sandblasted Glass - dry within seconds and ready to handle

ManchesterCharles Babbage AvenueKingsway Business Park,Rochdale, OL16 4NW, EnglandTel: +44 (0) 1706 863 600Fax: +44 (0) 1706 869 860www.crlaurence.co.uk

StuttgartBoschstrasse 7D-74360 IlsfeldGermanyTel: +49 (0) 7062 915 93 15Fax: +49 (0) 7062 915 93 16www.crlaurence.de

CopenhagenStamholmen 70 Unit B,DK-2650 HvidovreDenmark Tel: +45 36 72 09 00Fax: +45 36 70 33 35www.crlaurence.dk

FranceBoschstrasse 7D-74360 IlsfeldGermanyTel: +49 (0) 7062 915 93 15Fax: +49 (0) 7062 915 93 16www.crlaurence.fr

Call FREE on 00 800 0421 6144 Fax FREE on 00 800 0262 3299

6K Glass & Stainless Steel

1. Preparation of surface with CRL6K Pre-clean

Make sure all surfaces are thoroughly cleaned using a non silicone based

cleaner. Spray the dry surface with CRL6K Pre-clean and rub the product into

the surface with the pre-cleaning cloth (red). Due to the rapid evaporation of

the ethanol divide larger areas into sections for treatment of about 0.25m2. The

surface is ready when no more streak formation is evident.

2. Coating with CRL6K Protect

After pre-cleaning with CRL6K Pre-clean, spray CRL6K Protect onto the

surface and spread around with the coating cloth (blue).

When applying the CRL6K protection, treat only small surface areas at a

time, using 2 trigger sprays per 0.25 mtrs/sq and polish the product into the

surface until clear. It is important to cover the full surface area but do not apply

excessively, ensuring all of the coating is polished onto the surface using the

6K cloth (blue).

If residues are still apparent, repeat the process.

At least 24 hours after application, if a glass cleaner is to be used on the

surface, a non silicone or detergent based cleaner must be used.

CRL AC6050 Cleaner is recommended.

Reaction Time and Quality Control

Immediately after the application of CRL6K Protect, the nanoparticles form a

strong bond with the surface in a chemical reaction. After only a few minutes

the water spray test will show good droplet formation. After about 24 hours (at

20˚C) the reaction is completed and the coating is fully durable. Even before

completion of the reaction CRL6K Protect can be touched and can come into

contact with moisture immediately after coating.

Do not apply adhesive labels until after the 24hr (at 20˚C) curing period.

Note: Wash application cloths separately after each use – Hot washing

recommended after 30m2 coverage!

Attention! When using these products all safety instructions from the data

specifications or manufacturers instructions for product use must be observed.

6K Sandblasted Glass

1. Preparation of surface with CRL6K Sandblast Deep Clean

Prepare sandblasted glass for coating by ensuring removal of all residue dust

from the surface by either blasting with compressed air, or passing through

automated washer if appropriate. Spray surface with CRL6K Sandblast

Deep Clean, using a CRL6K Sandblast Deep Clean cloth (Yellow, CAT.NO.

6KSBDCLOTH) wipe in one direction to ensure any dust residue is not left on

surface, and turn cloth regularly.

2. Coating with CRL6K Sandblast Protect

Lightly cover glass with CRL6K Sandblast Protect and immediately work

the product into the surface with circular motions using a CRL6K Sandblast

Protect cloth (Green, CAT.NO. 6KSBPCLOTH). When applying the CRL6K

Sandblast Protect, treat only small surface areas at a time, using 2-3 trigger

sprays per 0.25 mtrs/sq and polish the product into the surface to achieve

an even coverage. It is important to cover the full surface area but do not

apply excessively, ensuring all of the coating is polished onto the surface. If

residues are still apparent, repeat the process.

Finger prints, dust and stress from heavy abrasion and

strong chemicals should be avoided until 24 hours after

the application. At least 24 hours after application, if a glass cleaner is to

be used on the surface, a non silicone or detergent based cleaner must be

used. CRL AC6050 Cleaner is recommended.

Reaction Time and Quality Control

Immediately after the application of CRL6K Sandblast Protect, the

nanoparticles form a strong bond with the surface in a chemical reaction.

After about 24 hours (at 20˚C) the reaction is completed and the coating is

fully durable. Even before completion of the reaction, and as soon as the

coating is touch dry CRL6K Sandblast Protect can be handled.

Do not apply adhesive labels until after the 24hr (at 20˚C) curing period.

Note: Wash application cloths separately after each use – Hot washing

recommended after 30m2 coverage!

Attention! When using these products all safety instructions from the

data specifications or manufacturers’ instructions for product use must

be observed.

Application Instructions