Nexa Jupiter Touch POS Terminal

Available December 2008

Presents....

A little about the manufacturer of the Jupiter

Publicly listed company that was founded in 1986 with a production capacity of 15,000~18,000 units/month/shift

Their products are sold under many different names around the world, such as NEC, Touch Dynamic and more.

Prestigious end user installations, (under a variety of brands), include Walmart, Circuit City, (22,000 POS!), Hong Kong Jockey Club and many more.

Market share: 45% in Europe, 35% in the Americas and 10% in Asia/Oceania and South Africa, (as stated from the manufacturer).

Specifications & Features

6 USB ports, (inc front access and Retail USB), 6 Serial ports, 1 Parallel port, 1 cash drawer port, 10/100 Ethernet, 2nd VGA output, CF card socket, 24V printer power port

15” Screen with Fujitsu resistive touch (ELO resistive, 3M Capacitive or ABON resistive also available)

Fanless Via 1Ghz CPU, 512mb ram, 80 gb HDD or Celeron M 1.5Ghz, (equivalent to P4 2.3Ghz), 1gb ram, 80gb HDD 12 months RTB warranty, (other options available). Small Footprint, can fold 90 degrees Dirt and spill resistant (IP43 Rating on front panel) Sealed, fanless external PSU Environmentally friendly – uses low power and is ROHS,

(restriction of hazardous substances), compliant.

Optional Accessories

FIMSK

• Plus off the shelf USB devices. E.g. USB Wi-fi, USB DVD-RW, USB storage and much more.

Features In Depth – Receipt Printer Power Port

The Jupiter features a 24V receipt printer power port that can replace POS printer power supplies.

This allows for a more clutter free POS installation. The Epson TM-T88IV and some other printers can be

purchased without a power supply, providing a cost saving.

The necessary cable is included with the terminal at no charge

Features In Depth – Retail USB

The Jupiter features both a 12V and 24V Retail USB port. Retail USB is a retail specific USB standard that allows for

more power and a clip to hold the cables in. Epson and Metrologic are two examples of companies

offering Retail USB as an interface, and this is increasing. Standard USB devices can also plug into Retail USB

sockets.

Features In Depth –Cash Drawer Port

The Jupiter provides an extremely easy to integrate cash drawer port.

It can be configured for either 12V or 24V. This gives you the flexibility to use legacy 12V drawers or 24V to match current receipt printers.

Cash drawers can be fired by sending data to COM 6.

Features In Depth – Spill Resistance

The Jupiter’s front panel is rated at IP43 which means...

IP4X - Protected against penetration of solid objects larger than 1mm

IPX3 - Protected against spraying water

Also on the fanless terminal there should be no build up of dust on the vents, due to the minimal airflow.

Connectivity – Notes

While the Jupiter has many ports, as with all POS terminals not all of them are standard accessible ports.

Typically there are 5 serial ports that are able to be used, with 4 of these standard DB9 connectors. An extra port is internal and used for the touch panel, and Com 6 is shared with the cash drawer port, so only the cash drawer port or Com 6 can be used.

For USB, one of the 6 available is a proprietary connector that is side mounted for connecting MSR/Smart card reader/Fingerprint reader etc. Leaving 5 ports usable for standard USB devices.

Connectivity (Upper Rear)

Line Out( Phono Jack)

10/100 LAN Port ( RJ-45 )

USBPort x 2

COM 1(DB9) / COM 3(DB9)

PS/2 K/B or Mouse Port

Power Input

2nd.VGA Output

CF CARD Socket

N.B. The Jupiter has two separate sets of ports on the rear of the terminal. These are the ports on the rear of the LCD.

Connectivity (Lower Rear)

COM4(DB9)

Powered USB24V

Powered USB 12V

LPT Port

COM5(RJ45)

Cash DrawerPort (Command

by RS232)

24V DCOUTPUT

12V DCOUTPUT

COM6(DB9) It is recommended to use only one

12V and one 24V output between

Retail USB and Receipt printer

power port/2nd LCD power output

at the same time.

- Com 6 port expansion provides the flexibility to

choose between DB9 and cash drawer port.

N.B. The Jupiter has two separate sets of ports on the rear of the terminal. These are the rear side of it’s base.

Connectivity (Front)

USBPort x 1

• Front accessible USB makes it easy to connect a USB keyboard, USB CD-ROM drive or any other USB device quickly and easily.

• Rubber seal is included.

Finishing Up

From a world leading manufacturer Sleek, stylish design Rich in connectivity options Wide range of accessories Competitive price

Any questions?